openwrt/staging/yousong.git
9 years agobrcm47xx: explicitly select CPU_MIPS32_R2 and CPU_MIPSR2 for mips74k
Rafał Miłecki [Thu, 16 Apr 2015 21:20:37 +0000 (21:20 +0000)]
brcm47xx: explicitly select CPU_MIPS32_R2 and CPU_MIPSR2 for mips74k

The mips74k subtarget of brcm47xx configures gcc to compile for mips32r2;
however, the generated kernel config for 3.14 and later kernels ends up
with CPU_MIPS32_R1 and CPU_MIPSR1 selected.  The generated kernel config
for the 3.10 kernel (Barrier Breaker) properly selected CPU_MIPS32_R2 and
CPU_MIPSR2.  Modify the default kernel config for mips74k to explicitly
select CPU_MIPS32_R2 and CPU_MIPSR2.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
Tested-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45469

9 years agokernel: accidentally committed a few patches in the wrong place, move them
Felix Fietkau [Thu, 16 Apr 2015 20:43:11 +0000 (20:43 +0000)]
kernel: accidentally committed a few patches in the wrong place, move them

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45468

9 years agobcm53xx: add power button for WXR-1900DHP
Felix Fietkau [Thu, 16 Apr 2015 20:09:55 +0000 (20:09 +0000)]
bcm53xx: add power button for WXR-1900DHP

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45467

9 years agobcm53xx: add power button for Buffalo WZR-1750DHP
Felix Fietkau [Thu, 16 Apr 2015 20:09:48 +0000 (20:09 +0000)]
bcm53xx: add power button for Buffalo WZR-1750DHP

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45466

9 years agobcm53xx: add USB LED for Buffalo WZR-1750DHP
Felix Fietkau [Thu, 16 Apr 2015 20:09:42 +0000 (20:09 +0000)]
bcm53xx: add USB LED for Buffalo WZR-1750DHP

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45465

9 years agobcm53xx: make NAND flash timeouts non-interruptible to fix corruption issues
Felix Fietkau [Thu, 16 Apr 2015 20:09:36 +0000 (20:09 +0000)]
bcm53xx: make NAND flash timeouts non-interruptible to fix corruption issues

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45464

9 years agobase-files: reorder led trigger/brightness writes
Felix Fietkau [Thu, 16 Apr 2015 20:09:30 +0000 (20:09 +0000)]
base-files: reorder led trigger/brightness writes

Depending on configuration, disable the LED before writing the trigger
and enable it after writing it. Fixes LEDs where the value defaults to 1

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45463

9 years agobase-files: add generic preinit script to extract board/model info from device-tree
Felix Fietkau [Thu, 16 Apr 2015 20:09:21 +0000 (20:09 +0000)]
base-files: add generic preinit script to extract board/model info from device-tree

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45462

9 years agobcm53xx: increate trx maxlen to prevent build failures with bigger images
Felix Fietkau [Thu, 16 Apr 2015 20:09:15 +0000 (20:09 +0000)]
bcm53xx: increate trx maxlen to prevent build failures with bigger images

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45461

9 years agobcm53xx: fix WXR-1900DHP power led name and add usb led
Felix Fietkau [Thu, 16 Apr 2015 20:09:08 +0000 (20:09 +0000)]
bcm53xx: fix WXR-1900DHP power led name and add usb led

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45460

9 years agomvebu: better integrate xp-gp
Luka Perkov [Thu, 16 Apr 2015 13:53:57 +0000 (13:53 +0000)]
mvebu: better integrate xp-gp

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45459

9 years agobcm53xx: make use of the new board detection layer
Felix Fietkau [Thu, 16 Apr 2015 12:18:34 +0000 (12:18 +0000)]
bcm53xx: make use of the new board detection layer

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45458

9 years agobuild: tell users to do non-paralle builds on errors
Felix Fietkau [Thu, 16 Apr 2015 12:18:26 +0000 (12:18 +0000)]
build: tell users to do non-paralle builds on errors

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45457

9 years agomvebu: add support for the Linksys Caiman and Cobra
Imre Kaloz [Thu, 16 Apr 2015 09:54:39 +0000 (09:54 +0000)]
mvebu: add support for the Linksys Caiman and Cobra

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45456

9 years agomvebu: bring back CONFIG_CPU_THERMAL
Luka Perkov [Thu, 16 Apr 2015 00:23:34 +0000 (00:23 +0000)]
mvebu: bring back CONFIG_CPU_THERMAL

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45455

9 years agomvebu: refresh kernel config
Luka Perkov [Thu, 16 Apr 2015 00:10:42 +0000 (00:10 +0000)]
mvebu: refresh kernel config

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45454

9 years agomvebu: fix typo in marvell profile
Luka Perkov [Wed, 15 Apr 2015 16:23:20 +0000 (16:23 +0000)]
mvebu: fix typo in marvell profile

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45453

9 years agomvebu: better integrate 385-ap-db
Luka Perkov [Wed, 15 Apr 2015 16:23:10 +0000 (16:23 +0000)]
mvebu: better integrate 385-ap-db

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45452

9 years agobcm53xx: add USB 2.0 power control for WXR-1900DHP
Felix Fietkau [Wed, 15 Apr 2015 16:06:20 +0000 (16:06 +0000)]
bcm53xx: add USB 2.0 power control for WXR-1900DHP

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45451

9 years agobcm53xx: add USB 2.0 support
Felix Fietkau [Wed, 15 Apr 2015 16:06:14 +0000 (16:06 +0000)]
bcm53xx: add USB 2.0 support

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45450

9 years agoodhcp6c: silence "bad number" warnings
Steven Barth [Wed, 15 Apr 2015 14:04:17 +0000 (14:04 +0000)]
odhcp6c: silence "bad number" warnings

Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45449

9 years agoodhcp6c: avoid saving empty RA search domains
Steven Barth [Wed, 15 Apr 2015 12:57:41 +0000 (12:57 +0000)]
odhcp6c: avoid saving empty RA search domains

Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45448

9 years agoopkg: fix md5 related #ifdef (thx, swalker)
Felix Fietkau [Tue, 14 Apr 2015 22:10:40 +0000 (22:10 +0000)]
opkg: fix md5 related #ifdef (thx, swalker)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45447

9 years agouclient: update to the latest version, fixes a crash in processing redirect/disconnec...
Felix Fietkau [Tue, 14 Apr 2015 21:05:45 +0000 (21:05 +0000)]
uclient: update to the latest version, fixes a crash in processing redirect/disconnect after headers

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45446

9 years agobcm53xx: add (disabled) support for upgrading kernel during sysupgrade
Rafał Miłecki [Tue, 14 Apr 2015 20:50:59 +0000 (20:50 +0000)]
bcm53xx: add (disabled) support for upgrading kernel during sysupgrade

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45445

9 years agootrx: support for creating simple TRX files
Rafał Miłecki [Tue, 14 Apr 2015 20:50:53 +0000 (20:50 +0000)]
otrx: support for creating simple TRX files

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45444

9 years agootrx: change command line API to start with a mode
Rafał Miłecki [Tue, 14 Apr 2015 20:50:46 +0000 (20:50 +0000)]
otrx: change command line API to start with a mode

This will allow adding more modes without options conflict.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45443

9 years agorpcd: update to latest git HEAD
John Crispin [Tue, 14 Apr 2015 19:01:29 +0000 (19:01 +0000)]
rpcd: update to latest git HEAD

adds support for reading md5 sums of files

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45442

9 years agoustream-ssl: update to latest git HEAD
John Crispin [Tue, 14 Apr 2015 19:01:24 +0000 (19:01 +0000)]
ustream-ssl: update to latest git HEAD

fixes long writes when using polarssl

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45441

9 years agofstools: update to latest git HEAD
John Crispin [Tue, 14 Apr 2015 19:01:09 +0000 (19:01 +0000)]
fstools: update to latest git HEAD

fixes issues with semi-initialized overlay partitions during firstboot

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45440

9 years agoar71xx: Enable AT803X_PHY to set special flags
John Crispin [Tue, 14 Apr 2015 19:00:57 +0000 (19:00 +0000)]
ar71xx: Enable AT803X_PHY to set special flags

Open-Mesh OM5P-AN use a AT8035 (F1E) behind one of the ethernet ports. This PHY
requires special flags to work correctly. Otherwise massive packet loss happens
with active POE or when switching the link speed from gigabit ethernet to fast
ethernet. The generic PHY doesn't have support to change these settings.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 45439

9 years agoar71xx: fix ethernet packet loss issues on OM5P-AN
John Crispin [Tue, 14 Apr 2015 19:00:51 +0000 (19:00 +0000)]
ar71xx: fix ethernet packet loss issues on OM5P-AN

The OM5P-AN boards are suffering from ethernet packet loss when booting with
some active POE setups or when switching to Fast Ethernet when previously
booted with Gigabit ethernet attached.

The cause of the problem is that the AR8035 PHYs requires special register
settings to work reliably on these boards. Enable the RGMII TX, RX delays and
disable SmartEE functionality of the AR8035 PHYs. Also enable the RXD and RDV
delay in the ETH_CFG register to fix the issue.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 45438

9 years agoopkg: drop md5 in favour of sha256
John Crispin [Tue, 14 Apr 2015 19:00:14 +0000 (19:00 +0000)]
opkg: drop md5 in favour of sha256

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45437

9 years agootrx: use %zd to fix printf format warnings
Rafał Miłecki [Tue, 14 Apr 2015 16:16:11 +0000 (16:16 +0000)]
otrx: use %zd to fix printf format warnings

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45436

9 years agoodhcpd: fix accidental logic inversion
Steven Barth [Tue, 14 Apr 2015 14:21:52 +0000 (14:21 +0000)]
odhcpd: fix accidental logic inversion

Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45435

9 years agobuild: replace the deprecated find argument -perm +0100 with /0100 (#19480)
Felix Fietkau [Tue, 14 Apr 2015 12:49:30 +0000 (12:49 +0000)]
build: replace the deprecated find argument -perm +0100 with /0100 (#19480)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45434

9 years agootrx: check TRX length read from header to avoid Segmentation fault
Rafał Miłecki [Tue, 14 Apr 2015 12:18:57 +0000 (12:18 +0000)]
otrx: check TRX length read from header to avoid Segmentation fault

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45433

9 years agomac80211: merge a number of upstream driver fixes/improvements
Felix Fietkau [Tue, 14 Apr 2015 12:17:34 +0000 (12:17 +0000)]
mac80211: merge a number of upstream driver fixes/improvements

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45432

9 years agokernel: update bgmac patches to the latest version submitted
Felix Fietkau [Tue, 14 Apr 2015 12:17:20 +0000 (12:17 +0000)]
kernel: update bgmac patches to the latest version submitted

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45431

9 years agootrx: include byteswap.h to fix compilation with musl
Rafał Miłecki [Tue, 14 Apr 2015 11:10:14 +0000 (11:10 +0000)]
otrx: include byteswap.h to fix compilation with musl

Fixes #19470

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45430

9 years agoodhcp6c: fix some issue discovered by scan-build
Steven Barth [Tue, 14 Apr 2015 08:33:37 +0000 (08:33 +0000)]
odhcp6c: fix some issue discovered by scan-build

Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45429

9 years agoodhcpd: avoid illegal memory access in some corner cases
Steven Barth [Tue, 14 Apr 2015 08:31:53 +0000 (08:31 +0000)]
odhcpd: avoid illegal memory access in some corner cases

Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45428

9 years agobuild: set CCACHE_DIR for host builds
Felix Fietkau [Tue, 14 Apr 2015 00:00:55 +0000 (00:00 +0000)]
build: set CCACHE_DIR for host builds

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45427

9 years agobcm53xx: refresh kernel patches
Felix Fietkau [Mon, 13 Apr 2015 22:23:37 +0000 (22:23 +0000)]
bcm53xx: refresh kernel patches

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45426

9 years agoqos-scripts: remove layer7 support
Felix Fietkau [Mon, 13 Apr 2015 22:23:26 +0000 (22:23 +0000)]
qos-scripts: remove layer7 support

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45425

9 years agoiptables: remove layer7 support
Felix Fietkau [Mon, 13 Apr 2015 22:23:19 +0000 (22:23 +0000)]
iptables: remove layer7 support

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45424

9 years agokernel: finally remove layer7 filter support
Felix Fietkau [Mon, 13 Apr 2015 22:23:14 +0000 (22:23 +0000)]
kernel: finally remove layer7 filter support

it has been non-functional for years and caused numerous memleaks and
crashes for people that tried to enable it.
it has no maintained upstream source, and it does not look like it's
going to be fixed any time soon

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45423

9 years agokernel: fix more bgmac dma init/cleanup issues
Felix Fietkau [Mon, 13 Apr 2015 20:08:30 +0000 (20:08 +0000)]
kernel: fix more bgmac dma init/cleanup issues

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45422

9 years agomvebu: copy the initramfs files to the bin dir
Imre Kaloz [Mon, 13 Apr 2015 20:06:47 +0000 (20:06 +0000)]
mvebu: copy the initramfs files to the bin dir

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45421

9 years agokernel: sync bgmac changes with latest upstream submission
Felix Fietkau [Mon, 13 Apr 2015 17:32:33 +0000 (17:32 +0000)]
kernel: sync bgmac changes with latest upstream submission

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45420

9 years agobcm53xx: add support for the Buffalo WXR-1900DHP
Felix Fietkau [Mon, 13 Apr 2015 17:32:25 +0000 (17:32 +0000)]
bcm53xx: add support for the Buffalo WXR-1900DHP

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45419

9 years agobcm53xx: fix GPIO pins > 16
Felix Fietkau [Mon, 13 Apr 2015 17:32:18 +0000 (17:32 +0000)]
bcm53xx: fix GPIO pins > 16

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45418

9 years agokernel: add bgmac fixes for bcm53xx (fix ethernet bringup on a bcm4709 based device)
Felix Fietkau [Mon, 13 Apr 2015 17:32:12 +0000 (17:32 +0000)]
kernel: add bgmac fixes for bcm53xx (fix ethernet bringup on a bcm4709 based device)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45417

9 years agobcm53xx: add missing l2 cache controller AUXCTL bit
Felix Fietkau [Mon, 13 Apr 2015 17:32:05 +0000 (17:32 +0000)]
bcm53xx: add missing l2 cache controller AUXCTL bit

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45416

9 years agomvebu: add support for the in-CPU RTC on the Armada 38x
Imre Kaloz [Mon, 13 Apr 2015 13:06:34 +0000 (13:06 +0000)]
mvebu: add support for the in-CPU RTC on the Armada 38x

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45415

9 years agomvebu: add comments to image generation
Imre Kaloz [Mon, 13 Apr 2015 12:15:40 +0000 (12:15 +0000)]
mvebu: add comments to image generation

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45414

9 years agomvebu: stop legacy image generation
Imre Kaloz [Mon, 13 Apr 2015 12:08:42 +0000 (12:08 +0000)]
mvebu: stop legacy image generation

If you can't find the firmware for you board, send proper patches.

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45413

9 years agomvebu: generate a single firmware for the 385-db-ap
Imre Kaloz [Mon, 13 Apr 2015 12:06:56 +0000 (12:06 +0000)]
mvebu: generate a single firmware for the 385-db-ap

This has been done without having a board, but should work.

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45412

9 years agomvebu: reflect Armada 38x support in the name
Imre Kaloz [Mon, 13 Apr 2015 11:30:39 +0000 (11:30 +0000)]
mvebu: reflect Armada 38x support in the name

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45411

9 years agodnsmasq: fix dnssec timestamp logic, backport crashfix
Steven Barth [Mon, 13 Apr 2015 07:49:29 +0000 (07:49 +0000)]
dnsmasq: fix dnssec timestamp logic, backport crashfix

Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45410

9 years agowpan: remove duplicate DEPENDS
Luka Perkov [Mon, 13 Apr 2015 07:01:32 +0000 (07:01 +0000)]
wpan: remove duplicate DEPENDS

Signed-off-by: Varka Bhadram <varkab@cdac.in>
SVN-Revision: 45409

9 years agobcm53xx: add a comment about the gpio base patch
Felix Fietkau [Sun, 12 Apr 2015 22:10:44 +0000 (22:10 +0000)]
bcm53xx: add a comment about the gpio base patch

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45408

9 years agokernel: bgmac: add more DMA related fixes
Felix Fietkau [Sun, 12 Apr 2015 22:10:40 +0000 (22:10 +0000)]
kernel: bgmac: add more DMA related fixes

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45407

9 years agoppc40x: upgrade to 3.18
Imre Kaloz [Sun, 12 Apr 2015 20:48:13 +0000 (20:48 +0000)]
ppc40x: upgrade to 3.18

left "broken" as I'm not sure if my only board is to blame.. testers welcomed

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45406

9 years agoorion: upgrade to 3.18 (compile tested only)
Imre Kaloz [Sun, 12 Apr 2015 20:45:55 +0000 (20:45 +0000)]
orion: upgrade to 3.18 (compile tested only)

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45405

9 years agofstools: reject relative mount points
Jo-Philipp Wich [Sun, 12 Apr 2015 20:34:31 +0000 (20:34 +0000)]
fstools: reject relative mount points

To prevent future confusion around '/overlay' vs. 'overlay' simply reject
relative path specifications as mount points since such paths result in
undefined behaviour anyway.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45404

9 years agobcm53xx: try to handle Netgear R8000 VLANs config
Rafał Miłecki [Sun, 12 Apr 2015 20:11:25 +0000 (20:11 +0000)]
bcm53xx: try to handle Netgear R8000 VLANs config

It seems to have few ports connected to CPU (only for CPU sending data?)
as part of "SMP dual core 3 GMAC setup" feature.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45403

9 years agob53: improve overriding CPU port state on BCM5301X
Rafał Miłecki [Sun, 12 Apr 2015 20:00:42 +0000 (20:00 +0000)]
b53: improve overriding CPU port state on BCM5301X

On BCM5301X there are two different cases to handle: CPU port 8 vs. any
other one. Support for CPU port 8 was already partially implemented but
it lacked setting some extra bit for 2G speed. It also will need to be
extended to implement "SMP dual core 3 GMAC setup". That's the reason
for handling it in separated code block.
This patch also adds overriding CPU port state for port other than 8. It
requires using recently defined GMII_PORT registers.
It was tested for regressions on BCM53011 revs 2 & 3. It was also
confirmed to fix switch on some internal Broadcom board.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45402

9 years agomvebu: refresh patches
Imre Kaloz [Sun, 12 Apr 2015 17:30:41 +0000 (17:30 +0000)]
mvebu: refresh patches

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45401

9 years agomvebu: migrate mamba support to the upstreamed code
Imre Kaloz [Sun, 12 Apr 2015 17:29:50 +0000 (17:29 +0000)]
mvebu: migrate mamba support to the upstreamed code

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45400

9 years agobcm53xx: fix bcma gpio chip base
Felix Fietkau [Sun, 12 Apr 2015 17:22:04 +0000 (17:22 +0000)]
bcm53xx: fix bcma gpio chip base

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45399

9 years agokernel: add missing memory barrier to bgmac
Felix Fietkau [Sun, 12 Apr 2015 16:39:24 +0000 (16:39 +0000)]
kernel: add missing memory barrier to bgmac

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45398

9 years agomodules: add missing imx6 depenedency to dwc2
John Crispin [Sun, 12 Apr 2015 15:34:44 +0000 (15:34 +0000)]
modules: add missing imx6 depenedency to dwc2

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45397

9 years agomvebu: handle other SKUs as well
Imre Kaloz [Sun, 12 Apr 2015 15:04:14 +0000 (15:04 +0000)]
mvebu: handle other SKUs as well

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45396

9 years agomvebu: include the ahci driver in the default profile
Imre Kaloz [Sun, 12 Apr 2015 15:03:25 +0000 (15:03 +0000)]
mvebu: include the ahci driver in the default profile

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45395

9 years agomodules: package the mvebu ahci driver
Imre Kaloz [Sun, 12 Apr 2015 15:02:43 +0000 (15:02 +0000)]
modules: package the mvebu ahci driver

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45394

9 years agogeneric: make sure we only try to mangle bootargs we do have
Imre Kaloz [Sun, 12 Apr 2015 14:46:19 +0000 (14:46 +0000)]
generic: make sure we only try to mangle bootargs we do have

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45393

9 years agobcm53xx: allow sysupgrade firmwares without UBI containing rootfs
Rafał Miłecki [Sun, 12 Apr 2015 12:04:13 +0000 (12:04 +0000)]
bcm53xx: allow sysupgrade firmwares without UBI containing rootfs

In most cases it allows reverting back to the vendor firmware (as they
usually don't use UBI). If users wants to do that we can't do anything
anyway. Erease counters will be just lost. The only thing we do is warn:
"Flashing firmware without UBI for rootfs. All erase counters will be
lost."
It still requires forcing sysupgrade.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45392

9 years agobcm53xx: add platform_pre_upgrade to prepare for kernel+UBI sysupgrade
Rafał Miłecki [Sun, 12 Apr 2015 11:46:16 +0000 (11:46 +0000)]
bcm53xx: add platform_pre_upgrade to prepare for kernel+UBI sysupgrade

We can now detect that provided firmware contains kernel and UBI image
partitions. Flashing it in a sane way (keeping erase counters) still
needs to be implemented.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45391

9 years agootrx: support for extracting partitions
Rafał Miłecki [Sun, 12 Apr 2015 11:46:11 +0000 (11:46 +0000)]
otrx: support for extracting partitions

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45390

9 years agobcm53xx: rework vendor fw handling to don't duplicate upgrade calls
Rafał Miłecki [Sun, 12 Apr 2015 10:42:27 +0000 (10:42 +0000)]
bcm53xx: rework vendor fw handling to don't duplicate upgrade calls

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45389

9 years agokernel: add bgmac fixes for various issues
Felix Fietkau [Sun, 12 Apr 2015 10:35:21 +0000 (10:35 +0000)]
kernel: add bgmac fixes for various issues

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45388

9 years agobcm53xx: fix UBI EOF patch to allow sysupgrade after first installation
Rafał Miłecki [Sun, 12 Apr 2015 10:20:59 +0000 (10:20 +0000)]
bcm53xx: fix UBI EOF patch to allow sysupgrade after first installation

With previous version of patch info about need of erasing blocks was
stored once per boot. It was breaking in following scenario:
1) First boot after installation (erasing blocks after 0xdeadc0de)
2) Doing sysupgrade (with ubidetach & ubiformat)
3) Attaching UBI again (it caused all blocks to be erased)

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45387

9 years agomvebu: reformat the damaged syscfg partition on the mamba
Imre Kaloz [Sun, 12 Apr 2015 08:35:33 +0000 (08:35 +0000)]
mvebu: reformat the damaged syscfg partition on the mamba

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45386

9 years agokernel: revert section sorting change from r41951
Felix Fietkau [Sat, 11 Apr 2015 21:21:03 +0000 (21:21 +0000)]
kernel: revert section sorting change from r41951

It currently does not seem to make a difference anymore, except by
increasing compressed kernel image size

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45385

9 years agobusybox: enable BUSYBOX_DEFAULT_FEATURE_TOUCH_SUSV3 by default, dnsmasq relies on it
Felix Fietkau [Sat, 11 Apr 2015 19:34:45 +0000 (19:34 +0000)]
busybox: enable BUSYBOX_DEFAULT_FEATURE_TOUCH_SUSV3 by default, dnsmasq relies on it

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45384

9 years agokernel: remove leftover @ (#19454)
Felix Fietkau [Sat, 11 Apr 2015 12:23:36 +0000 (12:23 +0000)]
kernel: remove leftover @ (#19454)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45383

9 years agonetfilter.mk: remove bogus NAT related kernel module entries (#19451)
Felix Fietkau [Sat, 11 Apr 2015 12:22:39 +0000 (12:22 +0000)]
netfilter.mk: remove bogus NAT related kernel module entries (#19451)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45382

9 years agonetfilter.mk: drop obsolete kernel version dependencies
Felix Fietkau [Sat, 11 Apr 2015 12:22:28 +0000 (12:22 +0000)]
netfilter.mk: drop obsolete kernel version dependencies

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45381

9 years agonetifd: fix ieee80211r 'sh: bad number' in mac80211 setup (bug #19345)
Felix Fietkau [Sat, 11 Apr 2015 10:52:01 +0000 (10:52 +0000)]
netifd: fix ieee80211r 'sh: bad number' in mac80211 setup (bug #19345)

Two errors "netifd: radio0: sh: bad number" have recently surfaced in system
log in trunk when wifi interfaces come up. I tracked the errors to checking
numerical values of some config options without ensuring that the option has
any value.

The errors I see have apparently been introduced by r45051 (ieee80211r in
hostapd) and r45326 (start_disabled in mac80211). My patches fix two
instances of "bad number", but there may be a third one, as the original
report in bug 19345 pre-dates r45326 and already has two "bad number" errors
for radio0.

https://dev.openwrt.org/ticket/19345

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
SVN-Revision: 45380

9 years agonetifd: fix start_disabled 'sh: bad number' in mac80211 setup (bug #19345)
Felix Fietkau [Sat, 11 Apr 2015 10:51:55 +0000 (10:51 +0000)]
netifd: fix start_disabled 'sh: bad number' in mac80211 setup (bug #19345)

Two errors "netifd: radio0: sh: bad number" have recently surfaced in system
log in trunk when wifi interfaces come up. I tracked the errors to checking
numerical values of some config options without ensuring that the option has
any value.

The errors I see have apparently been introduced by r45051 (ieee80211r in
hostapd) and r45326 (start_disabled in mac80211). My patches fix two
instances of "bad number", but there may be a third one, as the original
report in bug 19345 pre-dates r45326 and already has two "bad number" errors
for radio0.

https://dev.openwrt.org/ticket/19345

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
SVN-Revision: 45379

9 years agoimx6: add missing patches from 3.14
Luka Perkov [Sat, 11 Apr 2015 10:46:20 +0000 (10:46 +0000)]
imx6: add missing patches from 3.14

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45378

9 years agokernel: remove kernel module checks/dependencies for 3.14
Felix Fietkau [Sat, 11 Apr 2015 10:43:46 +0000 (10:43 +0000)]
kernel: remove kernel module checks/dependencies for 3.14

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45377

9 years agoinclude: drop old kernel versions
Luka Perkov [Sat, 11 Apr 2015 10:28:20 +0000 (10:28 +0000)]
include: drop old kernel versions

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45376

9 years agogeneric: drop 3.14
Luka Perkov [Sat, 11 Apr 2015 10:28:14 +0000 (10:28 +0000)]
generic: drop 3.14

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45375

9 years agobrcm47xx: drop 3.14
Luka Perkov [Sat, 11 Apr 2015 10:28:11 +0000 (10:28 +0000)]
brcm47xx: drop 3.14

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45374

9 years agoadm8668: drop 3.14
Luka Perkov [Sat, 11 Apr 2015 10:28:06 +0000 (10:28 +0000)]
adm8668: drop 3.14

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45373

9 years agomcs814x: drop 3.14
Luka Perkov [Sat, 11 Apr 2015 10:28:03 +0000 (10:28 +0000)]
mcs814x: drop 3.14

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45372

9 years agoimx6: drop 3.14
Luka Perkov [Sat, 11 Apr 2015 10:28:00 +0000 (10:28 +0000)]
imx6: drop 3.14

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45371

9 years agoimx6: switch to 3.18
Luka Perkov [Sat, 11 Apr 2015 10:27:49 +0000 (10:27 +0000)]
imx6: switch to 3.18

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45370