[PATCH] scsi_transport_spi build fix

On alpha:

In file included from drivers/scsi/sym53c8xx_2/sym_glue.h:59,
                 from drivers/scsi/sym53c8xx_2/sym_fw.c:40:
include/scsi/scsi_transport_spi.h:57: error: field `dv_mutex' has incomplete type

Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] x86_64: Fix MCE exception stack for boot CPU

Fix a typo/mis-merge in one of the previous patches.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] jbd: remove_transaction fix

We have to check that also the second checkpoint list is non-empty before
dropping the transaction.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] jbd: log_do_checkpoint fix

While checkpointing we have to check that our transaction still is in the
checkpoint list *and* (not or) that it's not just a different transaction
with the same address.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Merge master.kernel.org:/home/rmk/linux-2.6-serial

Merge master.kernel.org:/home/rmk/linux-2.6-arm

Merge /pub/scm/linux/kernel/git/davem/net-2.6

Merge /pub/scm/linux/kernel/git/davem/sparc-2.6

[SPARC64]: Fix build with CONFIG_COMPAT disabled.

Based upon a report and preliminary patch from Jim Gifford.

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge /linux/kernel/git/tmlind/linux-omap-upstream

[SPARC64]: Serial Console for E250 Patch

From: Eddie C. Dost <ecd@brainaid.de>

I have the following patch for serial console over the RSC
(remote system controller) on my E250 machine. It basically adds
support for input-device=rsc and output-device=rsc from OBP, and
allows 115200,8,n,1,- serial mode setting.

Signed-off-by: David S. Miller <davem@davemloft.net>

[MAINTAINERS]: add entry for wireless networking

Add an entry to MAINTAINERS for wireless networking, just so people
know whom to bless with patches.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[MAINTAINERS]: correct location for net-2.6.git

Correct location info for net-2.6 git tree.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[ARM] 3281/1: ixp4xx: export ixp4xx_exp_bus_size for modules

Patch from David Vrabel

Export ixp4xx_exp_bus_size so modules can use the IXP4XX_EXP_BUS_BASE(n) macro.

Also, fix a printk format warning.

Signed-off-by: David Vrabel <dvrabel@arcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3272/1: fix kernel decompressor crash

Patch from Nicolas Pitre

Commit f4619025a51747a3788fd1bb6bdc46e368a889a7 broke the kernel
decompressor (at least on PXA).  Here's the fix.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3271/1: ARM EABI: fix calling of cmpxchg syscall emulation

Patch from Nicolas Pitre

This is kernel provided user space code.

Since a syscall is used, it has to be updated to work with EABI.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3270/1: ARM EABI: fix sigreturn and rt_sigreturn

Patch from Nicolas Pitre

The signal return path consists of user code provided by the kernel.
Since a syscall is used, it has to be updated to work with EABI.

Noticed by Daniel Jacobowitz.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3268/1: AT91RM9200 serial update for 2.6.15-git12

Patch from Andrew Victor

This patch fixes two small issues with 2.6.15-git12.

1) Corrected major/minor numbers for ttyAT devices in the KConfig help.
   (Patch from Karl Olsen)

2) tty->flip.count has been removed.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[ARM] 3267/1: PXA27x SSP controller register defines

Patch from David Vrabel

PXA27x SSP controller has a few different registers, including SCR (serial clock rate) in SSCR0.

Signed-off-by: David Vrabel <dvrabel@arcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Merge git://tipc.cslab.ericsson.net/pub/git/tipc

[IPV4]: Fix multiple bugs in IGMPv3

1) fix "mld_marksources()" to
        a) send nothing when all queried sources are excluded
        b) send full exclude report when source queried sources are
                not excluded
        c) don't schedule a timer when there's nothing to report

2) fix "add_grec()" to send empty-source records when it should
        The original check doesn't account for a non-empty source
        list with all sources inactive; the new code keeps that
        short-circuit case, and also generates the group header
        with an empty list if needed.

3) fix mca_crcount decrement to be after add_grec(), which needs
        its original value

4) add/remove delete records and prevent current advertisements
        when an exclude-mode filter moves from "active" to "inactive"
        or vice versa based on new filter additions.

        Items 1-3 are just IPv4 versions of the IPv6 bugs found
by Yan Zheng and fixed earlier. Item #4 is a related bug that
affects exclude-mode change records only (but not queries) and
also occurs in IPv6 (IPv6 version coming soon).

Signed-off-by: David L Stevens <dlstevens@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[PKTGEN]: Respect hard_header_len of device.

Don't assume 16.

Found by Ben Greear.

Signed-off-by: David S. Miller <davem@davemloft.net>

[IRDA]: maintainer status

Jean says he really doesn't have time to much IRDA any more.
The following would help motivate someone who has more time.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[CASSINI]: dont touch page_count

Remove page refcount manipulations from cassini driver by using
another field in struct page. Needed for lockless pagecache.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC64]: Update defconfig.

Signed-off-by: David S. Miller <davem@davemloft.net>

[PATCH] e1000: fix compile warning

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] e1000: fix receive breakage

in attempting to not send the "prefetch" patch, we broke the receive code,
this patch fixes that issue.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] e1000: Added driver comments

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] e1000: Fix whitespace

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] e1000: Added functions declarations

Added e1000_mc_addr_list_update
Added e1000_read_reg_io
Added e1000_enable_pciex_master

These are not static functions, that is why we have them declared in the header.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] e1000: Added functions to save and restore config

These functions help restore the driver to active configuration when coming out of resume for power management.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] e1000: Added RX buffer enhancements

Align the prefetches to a dword to help speed them up.
Recycle skb's and early replenish.
Force memory writes to complete before fetching more descriptors.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] e1000: Added disable packet split capability

Adds the ability to disability packet split at compile time and use the legacy receive path on PCI express hardware.  Made this a CONFIG option and modified the Kconfig, to reflect the new option.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[SERIAL] Add 8250 support for Decision Computer International Co. PCCOM2

There is a new device which is look like:

Serial controller: Decision Computer International Co. PCCOM2 (rev 02) (prog-if 02 [16550])
0700: 6666:0004 (rev 02) (prog-if 02)
Flags: medium devsel, IRQ 177
Memory at fe000000 (32-bit, non-prefetchable) [size=128]
I/O ports at e880 [size=128]
I/O ports at e400 [size=256]

It has two 16550A, and is not listed in kernel, although the
manufacturer clams that it is supported...

I've created the following patch, it only add the new PCI id and the
card to the repository, it seems to work.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[SERIAL] Fix serial8250 driver initialisation ordering

Commit 7493a314cb83797ce612a577475aacaedc553fed changed the ordering
of the registration of the platform device driver vs the 8250 drivers
internal initialisation.  This led to the probe function being called
before the driver had finished its internal initialisation, causing
mayhem.  Revert the ordering change.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

[IPV4]: RT_CACHE_STAT_INC() warning fix

BUG: using smp_processor_id() in preemptible [00000001] code: rpc.statd/2408

And it _is_ a bug, but I guess we don't care enough to add preempt_disable().

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge git://oss.sgi.com:8090/oss/git/xfs-2.6

Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/libata-dev

Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/netdev-2.6

[XFS] Fix a race in xfs_submit_ioend() where we can be completing I/O for
a page while we are still submitting other buffers on the same page for
I/O.

SGI-PV: 948197
SGI-Modid: xfs-linux-melb:xfs-kern:25004a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>

Merge /pub/scm/linux/kernel/git/davem/net-2.6

Merge /pub/scm/linux/kernel/git/davem/sparc-2.6

[PATCH] Fix sparse parse error in lppaca.h

sparse can't parse a struct definition in include/asm-powerpc/lppaca.h,
even though gcc can accept it.  The form looks like this:

        struct __attribute__((whatever)) foo { };

An equivalent that both gcc and sparse can handle is

        struct foo { } __attribute__((whatever));

This is the only definition of this type in the tree, and fixing it is
easier than fixing sparse.

Signed-off-by: Bryan O'Sullivan <bos@serpentine.com>
[ Side note: fixing sparse wouldn't be hard, but the "attribute at the
  end" version is the canonical one, and the one that makes sense. So
  let's just fix the kernel instead. Luc Van Oostenryck already sent
  out a sparse patch to the sparse mailing list in case anybody cares.
               -- Linus ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] skge: fix dma mask setup.

There are a couple of problems in the DMA setup code for skge.
* In the 64 bit case, it doesn't set the consistent mask.
* In the 32 bit case, the error check is backwards!
It likely will only be visible as a bug on 64 bit platforms.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] libata: Code for the IRQ mask flag

Signed-off-by: Alan Cox <alan@redhat.com>
Somewhat cleaner in the resync as someone cleaned up the pio xfer users
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] libata: Fix sector lock to apply to both drives not drive 0 twice

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] libata: Fix heuristic typos add LBA48PIO flag and support code, add IRQ flag for next diff

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] Intel ICH8 SATA: add PCI device IDs

Signed-off-by:  Jason Gaston <Jason.d.gaston@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] Fix warning with b44.c on 64bit boxes

sizeof() return is not an int, so use max_t to get the types right.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] sky2: 0.13 version

Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] sky2: more conservative transmit locking

Be more careful about transmit locking, this solves a possible race
between tx_complete and transmit, that would cause a tx timeout.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] sky2: don't inline so much

Don't need to inline quite so many routines, let the compiler
decide

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] sky2: use kzalloc

Can use kzalloc here.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] sky2: ratelimit error messages

Make sure and rate limit all the error messages that might occur. If a problem
occurs then a few messages are enough.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] sky2: optimize for 32 bit dma

Small optimization, if dma addresses are 32 bits, then high
bits are always zero.

Signed-off-by: Stephen Hemminger <shemminger@osdl.or>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] sky2: don't bother clearing status ring elements

Don't need to zero out the status ring entries after processing.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] sky2: write barrier's

Be more careful about memory barriers. The only place we really
need them is before and after updating the chip's ring interface.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] sky2: fix ram buffer for Yukon FE rev 2

Fix problems with Yukon FE rev 2 chipset. Don't cut and paste bugs in from
sk98lin driver. Change how the ram buffer is divided up, and make the math
clearer. Also, set the thresholds where rx takes precedence. The threshold
values are just guesses at this point, it might be worth tuning them later.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] sky2: version 0.12

Version update.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] sky2: call pci_set_consistent_dma_mask

Need to call pci_set_consistent_dma_mask in the case of 64 bit
DMA.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] sky2: receive buffer alignment

Need to make sure that sky2 receive buffers are 64 bit
aligned. Also, don't need to start off with GFP_ATOMIC
on initial setup.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] e100: e100 whitespace fixes

e100: e100 whitespace fixes

These are whitespace only fixes.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] e100: Handle the return values from pci_* functions

e100: Handle the return values from pci_* functions

This is to resolve warnings during compile time.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] e100: Fix TX hang and RMCP Ping issue (due to a microcode loading issue)

e100: Fix TX hang and RMCP Ping issue (due to a microcode loading issue)

Set the end of list bit to cause the hardware's transmit state machine to
work correctly and not prevent management (BMC) traffic.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[SOUND]: sparc/cs4231: Fix some typos which wrecked the build.

Signed-off-by: David S. Miller <davem@davemloft.net>

[SPARC]: Fix sbusfb build.

sbusfb_compat_ioctl() needs to return int, not long, as that
is what the fb_ops->fb_compat_ioctl method prototype wants.

Need to git rid of the "struct file *file" first argument to
fbiogetputcmap() and fbiogscursor() to match calls done in
sbusfb_compat_ioctl().

Signed-off-by: David S. Miller <davem@davemloft.net>

[TIPC] Avoid polluting the global namespace

This patch adds a tipc_ prefix to all externally visible symbols.

Signed-off-by: Per Liden <per.liden@ericsson.com>

[TIPC] Group protocols with sub-options in Kconfig

This is just a cosmetic change that moves the TIPC configuration
entry next to the other protocols that also have sub-options.
Makes the the networking options menu look a bit better.

Signed-off-by: Per Liden <per.liden@ericsson.com>

[TIPC] Add help text for TIPC configuration option

Signed-off-by: Per Liden <per.liden@ericsson.com>

[TIPC] Remove unused #includes

Signed-off-by: Per Liden <per.liden@ericsson.com>

[TIPC] Move ethernet protocol id to linux/if_ether.h

Signed-off-by: Per Liden <per.liden@ericsson.com>

[TIPC] Provide real email addresses in MAINTAINERS

Signed-off-by: Per Liden <per.liden@ericsson.com>

[TIPC] Updated link priority macros

Added macros for min/default/max link priority in tipc_config.h.
Also renamed TIPC_NUM_LINK_PRI to TIPC_MEDIA_LINK_PRI since that
is a more accurate description of what it is used for.

Signed-off-by: Per Liden <per.liden@ericsson.com>

[TIPC] Minor changes to #includes

Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>

[SPARC]: change if() BUG(); to BUG_ON in iommu.c

this patch changes if() BUG(); constructs
in iommu.c to BUG_ON(); so it gets save
to define BUG() and BUG_ON() to nullstatements.

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

ARM: OMAP: 4/4 Fix clock framework to use clk_enable/disable misc

This patch fixes OMAP clock framework to use clk_enable/disable
instead of clk_use/unuse as specified in include/linux/clk.h.

Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: 3/4 Fix clock framework to use clk_enable/disable for omap2

This patch fixes OMAP clock framework to use clk_enable/disable
instead of clk_use/unuse as specified in include/linux/clk.h.

Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: 2/4 Fix clock framework to use clk_enable/disable for omap1

This patch fixes OMAP clock framework to use clk_enable/disable
instead of clk_use/unuse as specified in include/linux/clk.h.

Signed-off-by: Tony Lindgren <tony@atomide.com>

ARM: OMAP: 1/4 Fix clock framework to use clk_enable/disable

This patch fixes OMAP clock framework to use clk_enable/disable
instead of clk_use/unuse as specified in include/linux/clk.h.

Instances of clk_use/unuse are renamed to clk_enable/disable,
and references clk_use/unuse are removed.

Signed-off-by: Tony Lindgren <tony@atomide.com>

[SPARC64]: Eliminate race condition reading Hummingbird STICK register

Ensure a consistent value is read from the STICK register by ensuring
that both high and low are read without high changing due to a roll
over of the low register.

Various Debian/SPARC users (myself include) have noticed problems with
Hummingbird based systems. The symptoms are that the system time is
seen to jump forward 3 days, 6 hours, 11 minutes give or take a few
seconds. In many cases the system then hangs some time afterwards.

I've spotted a race condition in the code to read the STICK register.
I could not work out why 3d, 6h, 11m is important but guess that it is
due to the 2^32 jump of STICK (forwards on one read and then the next
read will seem to be backwards) during a timer interrupt. I'm guessing
that a change of -2^32 will get converted to a large unsigned
increment after the arithmetic manipulation between STICK,
nanoseconds, jiffies etc.

I did a test where I modified __hbird_read_stick to artificially
inject rollover faults forcefully every few seconds. With this I saw
the clock jump over 6 times in 12 hours compared to once every month
or so.

Signed-off-by: Richard Mortimer <richm@oldelvet.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NET]: Use is_zero_ether_addr() in net/core/netpoll.c

This replaces a memcmp() with is_zero_ether_addr().

Signed-off-by: Kris Katterjohn <kjak@users.sourceforge.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[CASSINI]: Fix printk warning.

drivers/net/cassini.c:1930: warning: long unsigned int format, different type arg (arg 4)

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[PKTGEN]: Replacing with (compare|is_zero)_ether_addr() and ETH_ALEN

This replaces some tests with is_zero_ether_addr(), memcmp(one, two,
6) with compare_ether_addr(one, two), and 6 with ETH_ALEN where
appropriate.

Signed-off-by: Kris Katterjohn <kjak@users.sourceforge.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NET]: "signed long" -> "long"

Signed-off-by: Kris Katterjohn <kjak@users.sourceforge.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[EBTABLES]: Handle SCTP/DCCP in ebt_{ip,log}

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[PKT_SCHED]: Handle SCTP/DCCP in sfq_hash

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

[PATCH] libata: add a function to decide if we need iordy

This ought to be simple but for PIO2 we have to poke around the drive
data to get it 100% correct.

Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] libata: Pre UDMA EIDE PIO mode selection

I misread the spec when doing the original. I've tested the corrected
version with pre UDMA drives and it now picks the right modes. This is a
specific bug fix rather than an update or new feature item.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[libata] sata_promise: add pci id

airo: Off-by-one channel fix

[libata] sata_svw: add pci id

[PATCH] ahci: AHCI mode SATA patch for Intel ICH8

This patch adds the Intel ICH8 DID's to the ahci.c file for AHCI mode
SATA support.

Signed-off-by:  Jason Gaston <Jason.d.gaston@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] e1000: Removed unused variables and initialized variables

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] e1000: Cleaned up code and removed hard coded numbers

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] e1000: Added copy break code

Improves small packet performance with large amounts of reassembly being done in the stack.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] e1000: Added variable to handle return values for pci_enable_* functions

This was to fix compilation warnings.  Also added log messages when pci_enable_* functions return with an error.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] e1000: Added PCIe bus information

This is two patches, the first is adding additional bus information for the 8257{1|2|3} controllers.  The second patch was orginally a community patch to print bus type/speed/width, and enhanced by us.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] e1000: Added firmware version reporting for 8257{1|2|3} controllers

The EEPROM image version is reported as a firmware version for these controllers.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] e1000: Added hardware support for PCI express, 82546GB, and 82571 Fiber

Added 82571 fiber to WOL fix for dual port adapters.
Added support for 82546GB (Quad Copper).
Added PCIe typedef for x2, igp cable length 115, and extended TX CTRL registers.
Added parity error detection and PCIe CTRL registers.
Added EEPROM config registers.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[PATCH] e1000: Added cleaned_count to RX buffer allocation

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>