Felix Fietkau [Thu, 26 Sep 2013 17:53:20 +0000 (17:53 +0000)]
build: unify arm target cflags
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38211
Felix Fietkau [Thu, 26 Sep 2013 17:53:14 +0000 (17:53 +0000)]
build: unify mips target cflags
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38210
Felix Fietkau [Thu, 26 Sep 2013 17:53:09 +0000 (17:53 +0000)]
build: clean up default cflags handling
- reduce redundancy
- introduce a CPU_TYPE variable for cpu specific options
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38209
Luka Perkov [Thu, 26 Sep 2013 09:03:47 +0000 (09:03 +0000)]
uboot-imx6: fix typo in nitrogen6dlXg
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38205
Luka Perkov [Thu, 26 Sep 2013 08:36:12 +0000 (08:36 +0000)]
uboot-imx6: add support for Nitrogen6x boards
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
SVN-Revision: 38204
Luka Perkov [Thu, 26 Sep 2013 08:36:09 +0000 (08:36 +0000)]
uboot-imx6: alphabetize wandboard variants
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
SVN-Revision: 38203
Luka Perkov [Wed, 25 Sep 2013 23:35:55 +0000 (23:35 +0000)]
imx6: enable XZ_DEC_BCJ and XZ_DEC_ARM
squashfs is unable to decompress some blocks without that:
[ 1.880530] SQUASHFS error: Unable to read page, block bc77a, size 14c50
[ 1.887268] SQUASHFS error: Unable to read fragment cache entry [bc77a]
[ 1.893889] SQUASHFS error: Unable to read page, block bc77a, size 14c50
[ 1.900636] SQUASHFS error: Unable to read fragment cache entry [bc77a]
[ 1.907275] SQUASHFS error: Unable to read page, block bc77a, size 14c50
[ 1.913994] SQUASHFS error: Unable to read fragment cache entry [bc77a]
[ 1.920631] SQUASHFS error: Unable to read page, block bc77a, size 14c50
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38202
Luka Perkov [Wed, 25 Sep 2013 23:35:54 +0000 (23:35 +0000)]
imx6: fix spi on gw5400-a
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38201
Hauke Mehrtens [Wed, 25 Sep 2013 21:49:12 +0000 (21:49 +0000)]
bcm53xx: bgmac: use srab switch driver
use the srab switch driver on these SoCs.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38200
Hauke Mehrtens [Wed, 25 Sep 2013 21:47:25 +0000 (21:47 +0000)]
bcm53xx: update bgmac driver
Update the bgmac driver with the patches already used for bcm47xx target.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38199
Hauke Mehrtens [Wed, 25 Sep 2013 21:44:28 +0000 (21:44 +0000)]
kernel: b53: add Register Access Bridge Registers (SRAB) interface
The SRAB interface is used on BCM4707 and BCM5301X SoCs.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38198
Gabor Juhos [Wed, 25 Sep 2013 20:13:12 +0000 (20:13 +0000)]
kernel: create firmware partition from MyLoader partition parser
This is in preparation for sysupgrade support for Compex devices.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38197
Gabor Juhos [Wed, 25 Sep 2013 20:03:20 +0000 (20:03 +0000)]
image: generate separate jffs2 images w/o padding
The new root.jffs2-*-raw images can be used for firmware
images with custom padding requirements.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38196
Gabor Juhos [Wed, 25 Sep 2013 20:03:19 +0000 (20:03 +0000)]
tools/padjffs2: allow to specify extra offset
This will be useful for firmware images which are
using a custom header.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38195
Gabor Juhos [Wed, 25 Sep 2013 19:32:34 +0000 (19:32 +0000)]
avr32: optimize image generation
- remove the kernel+rootfs partitions from the MTD partition map,
- use a temporary directory for intermediate image files,
- append the root squashfs directly to the kernel,
- don't hardcode uImage size in the jffs2 images,
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38194
Gabor Juhos [Wed, 25 Sep 2013 19:32:33 +0000 (19:32 +0000)]
avr32: enable the new mtdsplit code
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38193
Gabor Juhos [Wed, 25 Sep 2013 18:42:14 +0000 (18:42 +0000)]
ar71xx: use correct board id for TL-MR3040 v2
Fix the image building code so that the kernel correctly
distinguishes between hardware revisions.
Signed-off-by: Mads Hansen <d@taba.se>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38192
Gabor Juhos [Wed, 25 Sep 2013 18:42:11 +0000 (18:42 +0000)]
ar71xx: add user-space support for TL-MR3040 v2
Signed-off-by: Mads Hansen <d@taba.se>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38191
Gabor Juhos [Wed, 25 Sep 2013 18:42:10 +0000 (18:42 +0000)]
ar71xx: improve kernel support for the TL-MR3040 v2
This patch adds support for the hardware slide switch on
the TL-MR3040 v2.
Signed-off-by: Mads Hansen <d@taba.se>
[juhosg: use EV_SW instead of EV_KEY]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38190
Luka Perkov [Wed, 25 Sep 2013 18:07:24 +0000 (18:07 +0000)]
imx6: add support for gw51xx
The Gateworks GW51xx family of products is based on the Freescale
i.MX6DL SoC and offers a small form-factor with peripherals such as:
- i.MX6DL 512MB DDR3
- 256MB NAND FLASH
- 1x PCIe
- 1x USB EHCI (to PCIe socket)
- 1x USB OTG
- HDMI out
- Analog Video in
- Gateworks System Controller
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 38189
Luka Perkov [Wed, 25 Sep 2013 18:07:20 +0000 (18:07 +0000)]
imx6: add support for gw54xx
The Gateworks GW54xx family of products is based on the Freescale
i.MX6Q SoC and offers a large variety of peripherals such as:
- i.MX6Q 1GB DDR3 (standard)
- 256MB NAND FLASH (standard)
- 6x PCIe (3x with USB)
- Optional expansion for additional USB/PCI based periperhals
- 1x USB EHCI
- 1x USB OTG
- HDMI Audio/Video in/out
- Analog Video in/out
- Analog Audio in/out
- Gateworks System Controller
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 38188
Gabor Juhos [Wed, 25 Sep 2013 18:00:35 +0000 (18:00 +0000)]
package/kernel: add support for industrial-io and AD799x
Add support for industrial IO core and (still staging)
driver for AD799x, a high precision I2C ADC family.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
[juhosg: update subject, reformat commit message]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38187
Gabor Juhos [Wed, 25 Sep 2013 18:00:34 +0000 (18:00 +0000)]
package/kernel: add hwmon driver for ADT7410
Add support for the ADT7410 hwmon driver, a high precision
I2C temperature sensor.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
[juhosg: update subject, reformat commit message]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38186
Gabor Juhos [Wed, 25 Sep 2013 18:00:33 +0000 (18:00 +0000)]
package/kernel: move I2C-GPIO drivers from i2c.mk to other.mk
Move pca953x support from i2c.mk to other.mk, where other
GPIO drivers are located. Remove duplicate pcf857x support
from i2c.mk.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
[juhosg: update subject, and reformat commit message]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38185
Luka Perkov [Wed, 25 Sep 2013 17:55:38 +0000 (17:55 +0000)]
imx6: update gw5400-a dts cleanup
- remove dead code
- alphabatize
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 38184
Gabor Juhos [Wed, 25 Sep 2013 17:51:12 +0000 (17:51 +0000)]
atheros: fix kernel warning about usage of reset gpio
During a reset the gpiolib warns about using the reset gpio
without explicit requesting it before:
[ 147.930000] ------------[ cut here ]------------
[ 147.930000] WARNING: at drivers/gpio/gpiolib.c:103 gpio_ensure_requested+0x68/0xcc()
[ 147.930000] autorequest GPIO-5
[ 147.930000] Modules linked in: ath5k ath mac80211 ipv6 cfg80211 compat arc4 crypto_blkcipher aead gpio_button_hotplug
[ 147.930000] Call Trace:
[ 147.930000] [<
8004e3bc>] dump_stack+0x8/0x34
[ 147.930000] [<
80058430>] warn_slowpath_common+0x78/0xa4
[ 147.930000] [<
800584e4>] warn_slowpath_fmt+0x2c/0x38
[ 147.930000] [<
80166f18>] gpio_ensure_requested+0x68/0xcc
[ 147.930000] [<
80167264>] gpio_direction_output+0xdc/0x168
[ 147.930000] [<
8004aba8>] ar2315_restart+0x28/0x54
[ 147.930000] [<
80069778>] sys_reboot+0x178/0x1c0
[ 147.930000] [<
80043670>] stack_done+0x20/0x40
[ 147.930000]
[ 147.930000] ---[ end trace
2c7a53d8549562d6 ]---
This is fixed with this patch by using another gpiolib api call
which includes the missing request.
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38183
Gabor Juhos [Wed, 25 Sep 2013 17:13:24 +0000 (17:13 +0000)]
kernel/3.10: refresh all target patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38182
Gabor Juhos [Wed, 25 Sep 2013 16:39:23 +0000 (16:39 +0000)]
ramips: sync 3.10 configs
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38181
Gabor Juhos [Wed, 25 Sep 2013 16:22:04 +0000 (16:22 +0000)]
lantiq/3.10: unbreak the mtd-split patch
Compile tested only.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38180
Gabor Juhos [Wed, 25 Sep 2013 14:38:57 +0000 (14:38 +0000)]
kernel/3.10: add upstream commit id to the backported hso patches
Also remove the internal patch numbers.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38179
Gabor Juhos [Wed, 25 Sep 2013 14:38:56 +0000 (14:38 +0000)]
kernel/3.10: refresh patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38178
Gabor Juhos [Wed, 25 Sep 2013 13:34:52 +0000 (13:34 +0000)]
avr32: remove 3.8 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38175
Gabor Juhos [Wed, 25 Sep 2013 13:34:51 +0000 (13:34 +0000)]
avr32: switch to 3.10
It works:
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
BARRIER BREAKER (Bleeding Edge, r38163)
-----------------------------------------------------
* 1/2 oz Galliano Pour all ingredients into
* 4 oz cold Coffee an irish coffee mug filled
* 1 1/2 oz Dark Rum with crushed ice. Stir.
* 2 tsp. Creme de Cacao
-----------------------------------------------------
root@OpenWrt:/# uname -a
Linux OpenWrt 3.10.12 #1 Tue Sep 24 18:47:12 CEST 2013 avr32 GNU/Linux
root@OpenWrt:/# cat /proc/cpuinfo
processor : 0
chip type : AT32AP700x revision C
cpu arch : AVR32B revision 1
cpu core : AP7 revision 0
cpu MHz : 140.000
i-cache : 16K (4 ways x 128 sets x 32)
d-cache : 16K (4 ways x 128 sets x 32)
features : dsp simd ocd perfctr java
bogomips : 281.23
root@OpenWrt:/#
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38174
Gabor Juhos [Wed, 25 Sep 2013 13:33:49 +0000 (13:33 +0000)]
avr32: add support for 3.10
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38173
Luka Perkov [Wed, 25 Sep 2013 13:02:55 +0000 (13:02 +0000)]
feeds: enable cloning of specific git commit
Following syntax should be used to enable this feature:
src-git custom git://openwrt/custom-feed^SHA_COMMIT_ID
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38172
Felix Fietkau [Wed, 25 Sep 2013 07:44:48 +0000 (07:44 +0000)]
uhttpd: fix appending https ports to cmdline
Otherwise it is started only on non-secure ports.
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>
SVN-Revision: 38171
Luka Perkov [Tue, 24 Sep 2013 20:01:03 +0000 (20:01 +0000)]
quilt: update to 0.60
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38170
Luka Perkov [Tue, 24 Sep 2013 20:01:02 +0000 (20:01 +0000)]
bison: update to 3.0
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38169
Luka Perkov [Tue, 24 Sep 2013 20:01:00 +0000 (20:01 +0000)]
m4: update to 1.4.17
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38168
Luka Perkov [Tue, 24 Sep 2013 16:21:30 +0000 (16:21 +0000)]
sdcc: drop tool, it is not used since r31227
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38167
Steven Barth [Tue, 24 Sep 2013 13:36:42 +0000 (13:36 +0000)]
uml: work around mangled parameter handling for ubd
SVN-Revision: 38166
Steven Barth [Tue, 24 Sep 2013 13:36:38 +0000 (13:36 +0000)]
uml: fix some kernel compilation issues with GCC
SVN-Revision: 38165
Steven Barth [Tue, 24 Sep 2013 13:36:33 +0000 (13:36 +0000)]
uml: work-around console issue with procd
SVN-Revision: 38164
Gabor Juhos [Tue, 24 Sep 2013 13:17:48 +0000 (13:17 +0000)]
ppc44x: remove 3.8 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38163
Gabor Juhos [Tue, 24 Sep 2013 13:17:47 +0000 (13:17 +0000)]
ppc44x: switch to 3.10
Compile tested only. The target is marked as
broken since 16 months so the kernel version
does not matter too much.
The target is scheduled for removal.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38162
Gabor Juhos [Tue, 24 Sep 2013 13:17:46 +0000 (13:17 +0000)]
ppc44x: add support for 3.10
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38161
Gabor Juhos [Tue, 24 Sep 2013 13:17:45 +0000 (13:17 +0000)]
rb532: remove 3.8 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38160
Gabor Juhos [Tue, 24 Sep 2013 13:17:43 +0000 (13:17 +0000)]
rb532: switch 3.10
Compile tested only. The target is marked as
broken since 9 months so the kernel version
does not matter too much.
The target is scheduled for removal.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38159
Gabor Juhos [Tue, 24 Sep 2013 13:17:42 +0000 (13:17 +0000)]
rb532: add support for 3.10
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38158
Gabor Juhos [Tue, 24 Sep 2013 13:17:39 +0000 (13:17 +0000)]
rb532: image: fix broken ifneq statement
Fixes the following build error:
/devel/openwrt/staging_dir/host/bin/patch-cmdline \
/devel/openwrt/build_dir/target-mipsel_uClibc-0.9.33.2/linux-rb532/vmlinux-initramfs \
'root=/dev/mtdblock1 rootfstype=yaffs2 '
Could not open kernel imagemake[5]: *** [install] Error 255
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38157
Gabor Juhos [Tue, 24 Sep 2013 13:17:38 +0000 (13:17 +0000)]
rb532: remove trailing whitespaces from image/Makefile
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38156
Gabor Juhos [Tue, 24 Sep 2013 12:19:57 +0000 (12:19 +0000)]
ar71xx: image: simplify mynet_n600_mtdlayout
Remove the kernel and rootfs partitions. The Seama
parser can find those automatically:
0x000000070000-0x000000ff0000 : "firmware"
2 seama-fw partitions found on MTD device firmware
0x000000070000-0x0000001b0000 : "kernel"
0x0000001b0000-0x000000ff0000 : "rootfs"
mtd: partition "rootfs" set to be root filesystem
1 squashfs-split partitions found on MTD device rootfs
0x000000360000-0x000000ff0000 : "rootfs_data"
0x000000ff0000-0x000001000000 : "radiocfg"
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38155
Gabor Juhos [Tue, 24 Sep 2013 12:19:54 +0000 (12:19 +0000)]
ar71xx: enable the Seama firmware parser
It will be used for the WD My Net N600 board.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38154
Gabor Juhos [Tue, 24 Sep 2013 09:36:26 +0000 (09:36 +0000)]
ar71xx: update the Image/Build/WZRHP macro
- append the root squashfs directly after the kernel,
- use the 64kraw/128kraw template instead of the 64k/128k,
- ensure that the generated images have enough erase blocks
for JFFS2 garbage collection,
Tested on WZR-HP-G300NH and WZR-600DHP boards.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38153
Gabor Juhos [Tue, 24 Sep 2013 09:36:25 +0000 (09:36 +0000)]
ar71xx: image: use a common macro for Buffalo WZRHP devices
The Image/Build/WZRHP64K and the Image/Build/WZRHP128K macros
are similar. Move the common stuff into the Image/Build/WZRHP
macro and update the orignal macros to use that.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38152
Gabor Juhos [Tue, 24 Sep 2013 08:14:44 +0000 (08:14 +0000)]
ar71xx: image: update Image/Build/CameoAP94 macro
- append the root squashfs directly after the kernel,
- use the 64kraw template instead of the 64k,
- ensure that the generated images have enough erase blocks
for JFFS2 garbage collection,
Tested on a TEW-673GRU board.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38151
Gabor Juhos [Tue, 24 Sep 2013 08:14:43 +0000 (08:14 +0000)]
ar71xx: image: use a common macro for Cameo AP94 based devices
The Image/Build/DIR825B1 and the Image/Build/DLRTDEV macros
are identical. Merge those into a new Image/Build/CameoAP94
macro, and update the device profiles to use the new macro.
Also rename the dir825b1_* mtdlayout macros to cameo_ap94_*.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38150
Gabor Juhos [Tue, 24 Sep 2013 06:13:14 +0000 (06:13 +0000)]
ar71xx: image: use the board name for temporary mtdpart files
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38149
Gabor Juhos [Tue, 24 Sep 2013 05:58:34 +0000 (05:58 +0000)]
ar71xx: update the Image/Build/UBNT2 macro
- append the root squashfs directly after the kernel,
- use the 64kraw template instead of the 64k,
- ensure that the generated images have enough erase blocks
for JFFS2 garbage collection,
Tested on a WispStation M5 board.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38148
Gabor Juhos [Tue, 24 Sep 2013 05:58:32 +0000 (05:58 +0000)]
ar71xx: build intramfs images for the Ubiquiti XM boards
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38147
Gabor Juhos [Tue, 24 Sep 2013 05:58:31 +0000 (05:58 +0000)]
ar71xx: image: use a common macro for UBNTXM/UBNTDEV
The firmware generation part is the same for both
macros. Move that into a separate macro and use the
new macro for Image/Build/UB{NTXM,DEV}.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38146
Gabor Juhos [Tue, 24 Sep 2013 05:58:29 +0000 (05:58 +0000)]
iwinfo: add Ubiquiti WispStation M5 to hardware.txt
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38145
Luka Perkov [Mon, 23 Sep 2013 21:58:36 +0000 (21:58 +0000)]
fix various init scripts
Changes include:
* removing unused variables
* replacing spaces with tabs where appropriate
* more consistency with variable declarations
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38142
Gabor Juhos [Mon, 23 Sep 2013 19:49:27 +0000 (19:49 +0000)]
ar71xx: image: update Image/Build/WHRHPG300N macro
- append the root squashfs directly after the kernel,
- use the 64kraw template instead of the 64k
- ensure that the generated images have enough erase blocks
for JFFS2 garbage collection,
Tested on the WHR-G301N board only.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38141
Gabor Juhos [Mon, 23 Sep 2013 12:54:05 +0000 (12:54 +0000)]
ar71xx: image use the 64kraw template for the TEW-732BR board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38140
Gabor Juhos [Mon, 23 Sep 2013 12:14:20 +0000 (12:14 +0000)]
ar71xx: image: update Build/Image/Planex macro
- remove the 'kernel' and 'rootfs' partitions from the mtd layout,
- move the .okli image into the uImage,
- append the root squashfs directly after the kernel,
- use the 64kraw template instead of the 64k
- ensure that the generated images have enough erase blocks
for JFFS2 garbage collection,
Tested on the MZK-W300NH board only.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38139
Gabor Juhos [Mon, 23 Sep 2013 12:14:19 +0000 (12:14 +0000)]
ar71xx: image: allow to build initramfs for Planex devices
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38138
Gabor Juhos [Mon, 23 Sep 2013 12:14:18 +0000 (12:14 +0000)]
ar71xx: image: build Planex kernels in a separate step
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38137
Gabor Juhos [Mon, 23 Sep 2013 09:49:04 +0000 (09:49 +0000)]
ar71xx: add profile and build image for the TEW-732BR board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38133
Gabor Juhos [Mon, 23 Sep 2013 09:49:02 +0000 (09:49 +0000)]
ar71xx: add user-space support for the TEW-732BR board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38132
Gabor Juhos [Mon, 23 Sep 2013 09:49:01 +0000 (09:49 +0000)]
ar71xx: add kernel support for the TEW-732BR board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38131
Gabor Juhos [Mon, 23 Sep 2013 09:22:50 +0000 (09:22 +0000)]
ar71xx: image: update the Image/Build/CameoHornet macro
- append the root squashfs directly to the kernel,
- use the 64kraw-nojffs template instead of sqashfs-only
- ensure that the generated images have enough erase blocks
for JFFS2 garbage collection,
Tested on a TEW-712BR devices only.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38130
Gabor Juhos [Mon, 23 Sep 2013 09:01:06 +0000 (09:01 +0000)]
ar71xx: update the Image/Build/Cameo macro
- append the root squashfs directly to the kernel,
- use the 64kraw/64kraw-nojffs template instead of 64k/squashfs-only,
- ensure, that the signature is placed at the correct offset in
the *-factory images,
- ensure that the generated images have enough erase blocks
for JFFS2 garbage collection,
Tested on DIR-600-A1 and TEW-632BR devices only.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38129
Gabor Juhos [Mon, 23 Sep 2013 08:24:10 +0000 (08:24 +0000)]
ar71xx: image: add new macros for AP99 based Cameo devices
The MTD layout of the AP99 based devices is different.
Add new macros to reflect that and use the new macros
for the DIR-615-E4 board.
This prevents overwriting of the 'mac' partition which
contain vital informations. The disadvantage of the change
is that the usable space is reduced by 192KiB. Blame the
vendors for the unfriendly partition layout.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38128
Gabor Juhos [Mon, 23 Sep 2013 08:24:05 +0000 (08:24 +0000)]
ar71xx: image: rename the Cameo macros
Use the reference board name in the macro
instead of the SoC number.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38127
Gabor Juhos [Sun, 22 Sep 2013 20:14:23 +0000 (20:14 +0000)]
ar71xx: image: add optional JFFS2 padding support to the CatFiles macro
Also remove the similar code from the Netgear
profile and use the new feature instead.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38126
Gabor Juhos [Sun, 22 Sep 2013 20:14:22 +0000 (20:14 +0000)]
ar71xx: image: remove too big files in the CatFiles macro
Also improve the warning message.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38125
Felix Fietkau [Sun, 22 Sep 2013 19:49:23 +0000 (19:49 +0000)]
xtables-addons: fix missing conversion from r38021 (resolves a broken dependency)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38124
Gabor Juhos [Sun, 22 Sep 2013 11:45:09 +0000 (11:45 +0000)]
ar71xx: simplify wndr3700 image generation
- remove the kernel and rootfs partitions from the mtd layout,
the kernel creates those automatically,
- remove estimation step, it is not needed anymore
- put the root squashfs directly after the kernel
- use the 64kraw template
With the default configuration, this allows to use more space for
rootfs_data with 64KiB. Tested on WNDR3700 v1 only.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38120
Gabor Juhos [Sun, 22 Sep 2013 11:45:08 +0000 (11:45 +0000)]
ar71xx: use the separate rootfs and uImage parsers
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38119
Gabor Juhos [Sun, 22 Sep 2013 11:45:06 +0000 (11:45 +0000)]
ar71xx: sync kernel config
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38118
Gabor Juhos [Sun, 22 Sep 2013 09:11:25 +0000 (09:11 +0000)]
ar71xx: image: add mtdpartsize macro
The new macro will be used to determine the firmware
partition size from an MTD layout.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38117
Gabor Juhos [Sun, 22 Sep 2013 09:11:24 +0000 (09:11 +0000)]
ar71xx: image: improve the rootfs_align macro
Improve the macro to return correct value for
all squashfs variant.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38116
Gabor Juhos [Sun, 22 Sep 2013 09:11:22 +0000 (09:11 +0000)]
ar71xx: image: improve the CatFiles macro
Make it possible to append the rootfs image directly
to the kernel.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38115
Gabor Juhos [Sat, 21 Sep 2013 17:56:18 +0000 (17:56 +0000)]
kernel/3.10: add partition parser for Seama firmwares
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38114
Gabor Juhos [Sat, 21 Sep 2013 17:56:09 +0000 (17:56 +0000)]
kernel/3.10: add partition parser for uImage firmwares
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38113
Gabor Juhos [Sat, 21 Sep 2013 17:56:01 +0000 (17:56 +0000)]
kernel/3.10: add default partition name defines to mtdsplit.h
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38112
Gabor Juhos [Sat, 21 Sep 2013 17:55:54 +0000 (17:55 +0000)]
kernel/3.10: add more helpers to the mtdsplit code
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38111
Gabor Juhos [Sat, 21 Sep 2013 17:55:49 +0000 (17:55 +0000)]
kernel/3.10: add separate rootfs partition parser
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38110
Gabor Juhos [Sat, 21 Sep 2013 17:55:44 +0000 (17:55 +0000)]
kernel/3.10: move squashfs check from rootfs split code into a separate file
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38109
Gabor Juhos [Sat, 21 Sep 2013 17:55:30 +0000 (17:55 +0000)]
kernel/3.10: allow to use partition parsers for rootfs and firmware split
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38108
Gabor Juhos [Sat, 21 Sep 2013 17:55:18 +0000 (17:55 +0000)]
kernel/3.10: allow to use different MTD parser types
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38107
Gabor Juhos [Sat, 21 Sep 2013 16:08:45 +0000 (16:08 +0000)]
ar71xx: enable wlan2g led in the default configuration of dir-825-c1
Enable the wlan2g led in the default configuration of dir-825-c1.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Patchwork: http://patchwork.openwrt.org/patch/4079/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38106
Gabor Juhos [Sat, 21 Sep 2013 16:08:44 +0000 (16:08 +0000)]
ar71xx: vanity changes for dir-825-c1
This patch
- changes the color names from orange to amber
- changes the name of GPIO 13 from WIFI_BGN (wifi_bgn) to WLAN_2G
(wlan2g) to be more consistent with the other routers' files
- changes the descriptions of the hardware keys to be a tad more
explicit
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Patchwork: http://patchwork.openwrt.org/patch/4081/
[juhosg: update the LED migration script as well]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38105
Gabor Juhos [Sat, 21 Sep 2013 15:55:57 +0000 (15:55 +0000)]
ar71xx: diag.sh: consolidate netgear device entries
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38104
Gabor Juhos [Sat, 21 Sep 2013 15:55:56 +0000 (15:55 +0000)]
ar71xx: use the green power led for diag on the WNR2200 board
Make it consistent with the other Netgear boards.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38103
Gabor Juhos [Sat, 21 Sep 2013 15:55:55 +0000 (15:55 +0000)]
ar71xx: use netgear prefix for WNDAP360 LED names
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38102
Gabor Juhos [Sat, 21 Sep 2013 15:55:54 +0000 (15:55 +0000)]
ar71xx: use netgear prefix for WNR612 v2 LED names
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38101
Gabor Juhos [Sat, 21 Sep 2013 15:55:52 +0000 (15:55 +0000)]
ar71xx: use netgear prefix for WNR2200 LED names
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38100
Gabor Juhos [Sat, 21 Sep 2013 15:55:51 +0000 (15:55 +0000)]
ar71xx: use netgear prefix for WNR2000 LED names
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38099
projects / openwrt / staging / chunkeey.git / log