staging: rtl8188eu: core: Replace memcpy() with ether_addr_copy() if ethernet addresses are __aligned(2)

This patch fixes the checkpatch warning:
Prefer ether_addr_copy() over memcpy() if the Ethernet addresses are
__aligned(2)
Done using coccinelle:

@@
expression exp1, exp2;
@@
- memcpy(exp1, exp2, ETH_ALEN);
+ ether_addr_copy(exp1, exp2);

The output of pahole shows that the addresses are aligned:

struct ieee80211_hdr {
        __le16                     frame_control;        /*     0     2 */
        __le16                     duration_id;          /*     2     2 */
        u8                         addr1[6];             /*     4     6 */
        u8                         addr2[6];             /*    10     6 */
        u8                         addr3[6];             /*    16     6 */
        __le16                     seq_ctrl;             /*    22     2 */
        u8                         addr4[6];             /*    24     6 */

        /* size: 30, cachelines: 1, members: 7 */
        /* last cacheline: 30 bytes */
};

struct wlan_bssid_ex {
        u32                        Length;               /*     0     4 */
        unsigned char              MacAddress[6];        /*     4     6 */
        u8                         Reserved[2];          /*    10     2 */
        struct ndis_802_11_ssid    Ssid;                 /*    12    36 */
        u32                        Privacy;              /*    48     4 */
        long int                   Rssi;                 /*    52     8 */
        enum NDIS_802_11_NETWORK_TYPE NetworkTypeInUse;  /*    60     4 */
        /* --- cacheline 1 boundary (64 bytes) --- */
        struct ndis_802_11_config  Configuration;        /*    64    32 */
        enum ndis_802_11_network_infra InfrastructureMode; /*    96     4 */
        unsigned char              SupportedRates[16];   /*   100    16 */
        struct wlan_phy_info       PhyInfo;              /*   116     4 */
        u32                        IELength;             /*   120     4 */
        u8                         IEs[768];             /*   124   768 */
        /* --- cacheline 13 boundary (832 bytes) was 60 bytes ago --- */

        /* size: 892, cachelines: 14, members: 13 */
        /* last cacheline: 60 bytes */
};

struct stadel_event {
        unsigned char              macaddr[6];           /*     0     6 */
        unsigned char              rsvd[2];              /*     6     2 */
        int                        mac_id;               /*     8     4 */

        /* size: 12, cachelines: 1, members: 3 */
        /* last cacheline: 12 bytes */
};

Signed-off-by: sayli karnik <karniksayli1995@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: staging: vme: convert to octal notation for permission bits

Ran checkpatch.pl -f vme_pio2_core.c
Fixed: WARNING: Symbolic permissions are not preferred. Consider using
octal permissions (0444)

Signed-off-by: Andrew Kanner <andrew.kanner@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: olpc_dcon: Replace u_int8_t with u8

This patch replaces type u_int8_t with u8 as suggested by checkpatch.pl.

Signed-off-by: sayli karnik <karniksayli1995@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: media: davinci_vpfe: Replace explicit NULL comparison with ! operator

This patch replaces the explicit NULL comparisons with ! operator.
It was found using Coccinelle:

@disable is_null@
expression e;
@@
- e == NULL
+ !e

Signed-off-by: sayli karnik <karniksayli1995@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: media: davinci_vpfe: Use BIT macro instead of left shifting 1

This patch replaces left shifts on 1 with the BIT(x) macro, as suggested
by checkpatch.pl.
This was done using coccinelle script:
@@
constant c;
@@
- (1 << c)
+ BIT(c)

Signed-off-by: sayli karnik <karniksayli1995@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ks7010: Remove extern keyword from function declaration

Remove extern specifier from function declaration as they have
it by default. Also move extern declaration from .c files to
their respective header file 'ks_hostif.h'. Coccinelle was used
to remove extern and other changes were done by hand.
Script:
@@
identifier func;
type T;
@@
- extern
T func(...);

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rts5208: rtsx_chip: Add space around binary operators

Add space around binary operators to resolve checkpatch issue.

Signed-off-by: Namrata A Shettar <namrataashettar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lmv: mark symbols static where possible

We get a few warnings when building kernel with W=1:
drivers/staging/lustre/lustre/lmv/lmv_obd.c:1640:1: warning: no previous prototype for 'lmv_locate_target_for_name' [-Wmissing-prototypes]
drivers/staging/lustre/lustre/lmv/lmv_obd.c:2421:5: warning: no previous prototype for 'lmv_read_page' [-Wmissing-prototypes]
....

In fact, these functions are only used in the file in which they are
declared and don't need a declaration, but can be made static.
so this patch marks these functions with 'static'.

Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: clean function declaration in cl_io.c up

We get 1 warning when building kernel with W=1:
drivers/staging/lustre/lustre/obdclass/cl_page.c:488:6: warning: no previous prototype for 'cl_page_disown0' [-Wmissing-prototypes]

In fact, this function is declared in
drivers/staging/lustre/lustre/obdclass/cl_io.c, but should be
removed in a header file. thus can be recognized in other file.

So this patch moves the declaration into
drivers/staging/lustre/lustre/include/cl_object.h.

Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: obdclass: clean function declarations in obd_config.c and class_obd.c up

We get 3 warnings when building kernel with W=1:

drivers/staging/lustre/lustre/obdclass/obd_mount.c:705:5: warning: no previous prototype for 'lustre_check_exclusion' [-Wmissing-prototypes]
drivers/staging/lustre/lustre/obdclass/obd_mount.c:1226:5: warning: no previous prototype for 'lustre_register_fs' [-Wmissing-prototypes]
drivers/staging/lustre/lustre/obdclass/obd_mount.c:1231:5: warning: no previous prototype for 'lustre_unregister_fs' [-Wmissing-prototypes]

In fact, the first function is declared in
drivers/staging/lustre/lustre/obdclass/obd_config.c,
and the other two functions are declared in
drivers/staging/lustre/lustre/obdclass/class_obd.c,
but all of these functions should be declared in
a header file, thus can be recognized in other file.

So this patch moves the declarations into
drivers/staging/lustre/lustre/include/obd_class.h.

Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: clean function declaration in super25.c up

We get 1 warning when building kernel with W=1:
drivers/staging/lustre/lustre/obdclass/obd_config.c:719:6: warning: no previous prototype for 'lustre_register_client_process_config' [-Wmissing-prototypes]

In fact, this function is declared in
drivers/staging/lustre/lustre/llite/super25.c, but should be
moved into a header file, thus can be recognized in other file.

So this patch moves the declaration into
drivers/staging/lustre/lustre/include/lprocfs_status.h.

Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: clean function declaration in super25.c up

We get 1 warning when building kernel with W=1:
drivers/staging/lustre/lnet/selftest/conctl.c:804:1: warning: no previous prototype for 'lstcon_ioctl_entry' [-Wmissing-prototypes]

In fact, this function is declared in
drivers/staging/lustre/lustre/llite/super25.c, but should be
moved into a header file, thus can be recognized in other file.

So this patch moves the declaration into
drivers/staging/lustre/lnet/selftest/console.h

Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: include/lustre_net.h: Remove unnecessary space before function pointer arguments.

Minor warnings spotted by checkpatch.pl in lustre
Remove unnecessary space before function pointer arguments.

Signed-off-by: Richard Groux <rgroux@sauron-mordor.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ks7010: Replace memset with eth_zero_addr

Use eth_zero_addr to assign zero address to the given address array
instead of memset when the second argument in memset is address
of zero. Coccinelle was used to do the replacement and add the
header file linux/etherdevice.h if not already present.
Script:
@header@
@@
#include <linux/etherdevice.h>

@r1@
expression e;
@@

-memset(e,0,ETH_ALEN);
+eth_zero_addr(e);

@includeheader depends on r1 && !header@
@@
+ #include <linux/etherdevice.h>
#include <...>

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: Use sizeof type *pointer instead of sizeof type

The patch uses the size of the dereference to a variable instead of it's type,
to make the code more resistant to type changes in the future. The type of the
pointer variable here is the same as the type in the argument that is being
replaced in sizeof().

Signed-off-by: sayli karnik <karniksayli1995@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove ODM_CmnInfoPtrArrayHook function

This function used once, and does not improve code readability.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove ODM_CmnInfoHook function

This function used once, and does not improve code readability.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8188eu: remove ODM_CmnInfoUpdate function

This function does not improve code readability.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: add spaces around <<

add spaces around << to fix the checkpatch issue, spaces preferred
around that '<<'.

Signed-off-by: Gargi Sharma <gs051095@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: add spaces around |

add spaces around | to fix the checkpatch issue, spaces preferred around
that '|'.

Signed-off-by: Gargi Sharma <gs051095@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: add spaces around >>

add spaces around >> to fix the checkpatch issue, spaces preferred
around that '>>'.

Signed-off-by: Gargi Sharma <gs051095@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: add spaces around &

add space around & to fix the checkpatch issue spaces preferred around
that '&'.

Signed-off-by: Gargi Sharma <gs051095@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: add spaces around +

add spaces around + to fix the checkpatch issue,
spaces preferred around that '&'.

Signed-off-by: Gargi Sharma <gs051095@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: add spaces around <<

add spaces around << to fix the checkpatch issue, spaces preferred
around that '<<'.

Signed-off-by: Gargi Sharma <gs051095@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: move && operator for logical continuation

Move && up to the previous line, to fix the checkpatch issue Logical
continuations should be on the previous line.

Signed-off-by: Gargi Sharma <gs051095@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: i4l: correct misspelled "ressources" to "resources"

change ressources to resources to fix the checkpatch issue
'ressources' may be misspelled.

Signed-off-by: Gargi Sharma <gs051095@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: Use the BIT() macro instead of left shifting 1

This patch replaces left shifts on 1 with the BIT(x) macro, as suggested
by checkpatch.pl.

Signed-off-by: sayli karnik <karniksayli1995@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: fix alignment for if arguments

Reduce indentation of multi-line if-test arguments for better readability.

Signed-off-by: Gargi Sharma <gs051095@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: remove blank line before closing brace

delete blank line before '}' to fix the checkpatch issue Blank lines
aren't necessary before a closing brace '}'.

Signed-off-by: Gargi Sharma <gs051095@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: add spaces around |

insert spaces around '|' to fix the checkpatch issue
spaces preferred around that '|'.

Signed-off-by: Gargi Sharma <gs051095@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: remove blank line after open brace

delete a blank line after an open brace to fix the check patch issue,
Blank lines aren't necessary after an open brace '{'.

Signed-off-by: Gargi Sharma <gs051095@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: remove unnecessary parentheses

! has higher priority than && or ||, so remove parentheses around
! expressions to make the code more readable.

Signed-off-by: Gargi Sharma <gs051095@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: move AND operator for logical continuation

Move && up to the previous line, to fix the checkpatch issue Logical
continuations should be on the previous line.

Signed-off-by: Gargi Sharma <gs051095@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: comedi: s626: Remove all unused functions

Remove all #ifdef'ed static functions as they are not used anywhere
in the kernel. Some functions were detected using Coccinelle but removed by
hand and some were removed as the functions in which they were getting
used were also unused functions.
Script:

@initialize:python@
@@
def display(name,p):
        print(name,p[0].file)

@r1@
identifier func;
type T;
position p;
@@
static T func@p(...)
{
...
}

@r@
identifier r1.func;
@@
func

@script:python depends on !r@
func << r1.func;
p << r1.p;
@@
display(func,p)

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon: remove multiple blank lines

Fixes the checkpatch issue Please don't use multiple blank lines.

Signed-off-by: Gargi Sharma <gs051095@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rts5208: make some vars to lower case to keep the style consistent

This patch fixes the checkpatch.pl warning:

WARNING: Comparisons should place the constant on the right side of the test

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-mc: remove .owner field for driver

Remove .owner field if calls are used which set it automatically.

Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Stuart Yoder <stuart.yoder@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-mc: use list_del_init instead of list_del/INIT_LIST_HEAD

Using list_del_init() instead of list_del() + INIT_LIST_HEAD().

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Stuart Yoder <stuart.yoder@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android ion/hisi: fix dependencies

The newly added Hi6220 Ion code fails to build when the ION_OF helpers
are not present:

drivers/staging/android/ion/hisilicon/hi6220_ion.o: In function `hi6220_ion_remove':
hi6220_ion.c:(.text.hi6220_ion_remove+0x4c): undefined reference to `ion_destroy_platform_data'
drivers/staging/android/ion/hisilicon/hi6220_ion.o: In function `hi6220_ion_probe':
hi6220_ion.c:(.text.hi6220_ion_probe+0x5c): undefined reference to `ion_parse_dt'
hi6220_ion.c:(.text.hi6220_ion_probe+0xf8): undefined reference to `ion_destroy_platform_data'

This selects the symbol when needed.

Fixes: 2b40182a19bc ("staging: android: ion: Add ion driver for Hi6220 SoC platform")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Laura Abbott <labbott@redhat.com>
Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: ion: Fix return value check in hi6220_ion_probe()

In case of error, the function ion_device_create() returns ERR_PTR() and
never returns NULL. The NULL test in the return value check should be
replaced with IS_ERR().

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org>
Acked-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Remove unnecessary return capture

Instead of storing the return value of a function call into a variable and
then returning it, we can club the two into a single return statement. This
change was made using the following semantic patch by Coccinelle:

@@
local idexpression ret;
expression e;
@@

-ret =
+return
     e;
-return ret;

Signed-off-by: Rehas Sachdeva <aquannie@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: emxx_udc: add braces to if-else block

add braces to if/else clause to fix the checkpatch issue braces {}
should be used on all arms of if/else block. Does not affect flow
because only single statement inside if/else block.

Signed-off-by: Gargi Sharma <gs051095@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: emxx_udc: Fix unsigned int to bare use of unsigned

This is a patch to fixes up a
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
found by the checkpatch.pl tool

Signed-off-by: Anchal Jain <anchalj109@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: gs_fpgaboot: Remove FSF address from GPL notice

This patch fixes the checkpatch.pl warning:

CHECK: Do not include the paragraph about writing to the Free Software
Foundation's mailing address from the sample GPL notice. The FSF has
changed addresses in the past, and may do so again. Linux already
includes a copy of the GPL.

Signed-off-by: Rehas Sachdeva <aquannie@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: gdm724x: Remove unnecessary blank line

This patch fixes the checkpatch.pl warning:
CHECK: Please don't use multiple blank lines

Signed-off-by: Rehas Sachdeva <aquannie@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: netlogic: Remove unused function

The function xlr_wakeup_queue is not used anywhere in the kernel.
Therefore, remove it. The static unused functions were detected
using Coccinelle but the change was done by hand.
Script used:

@initialize:python@
@@
def display(name,p):
print(name,p[0].file)

@r1@
identifier func;
type T;
position p;
@@
static T func@p(...)
{
...
}

@r@
identifier r1.func;
@@
func

@script:python depends on !r@
func << r1.func;
p << r1.p;
@@
display(func,p)

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: Fix long line and spelling mistake

This patch fixes the checkpatch.pl warning: Line over 80 characters.
Also, the word 'because' was spelled as 'Becuz' and has been corrected.

Signed-off-by: Rehas Sachdeva <aquannie@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: Fix lines over 80 characters

This patch fixes the checkpatch.pl warning:
Line over 80 characters.

Signed-off-by: Rehas Sachdeva <aquannie@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: fix double lock bug in SetPSModeWorkItemCallback()

Fix a double lock bug in SetPSModeWorkItemCallback().

Fixes: 5c2ba8b85e35 ("rtl8712: pwrctrl_priv: Replace semaphore lock with mutex")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ks7010: remove unused including <linux/version.h>

Remove including <linux/version.h> that don't need it.

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ks7010: Remove the explicit cast on kmalloc

The assignment operator implicitly converts a void pointer to the type of the
pointer it is assigned to. Hence an explicit cast on the result of the kmalloc
function is not required.

Signed-off-by: sayli karnik <karniksayli1995@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ks7010: Remove whitespace before newline

This patch fixes the checkpatch.pl warning:
WARNING: unnecessary whitespace before a quoted newline.

Signed-off-by: Rehas Sachdeva <aquannie@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: slicoss: Remove unnecessary braces {}

Removes unnecessary braces {} on both arms of an if-else block as they
have a single statement each. Issue detected by checkpatch.

Signed-off-by: Rehas Sachdeva <aquannie@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: slicoss: Remove blank lines before & after braces

Removes unnecessary blank lines after an opening brace '{' and before a closing
brace '}'. Issue detected by checkpatch.pl.

Signed-off-by: Rehas Sachdeva <aquannie@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: slicoss: Remove unnecessary blank line

Removes unnecessary blank line detected by checkpatch.

Signed-off-by: Rehas Sachdeva <aquannie@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: media: lirc: lirc_imon: Fix alignment with the open parenthesis

Fix alignment to match open parenthesis.

Signed-off-by: Anchal Jain <anchalj109@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: media: lirc: lirc_imon: Add space around the operators

CHECK: Add space around the operators { "<<", "*"}.

Signed-off-by: Anchal Jain <anchalj109@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: media: lirc: lirc_imon: Remove a blank line before a close parenthesis '}'

CHECK: Remove unnecessary space after cast

Signed-off-by: Anchal Jain <anchalj109@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: media: lirc: lirc_imon: Remove unnecessary blank line

CHECK: Remove a blank lines before a closed parenthesis '}'

Signed-off-by: Anchal Jain <anchalj109@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: media: lirc: lirc_imon: Remove multiple blank lines

checkpatch complains about multiple blank lines.

Signed-off-by: Anchal Jain <anchalj109@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: media: lirc: lirc_bt829: Remove explicit NULL comparison

Remove explicit NULL comparison and write it in its simpler form.

Signed-off-by: Anchal Jain <anchalj109@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: Change 'uint32_t' to 'u32'

It is preferred to use 'u32' instead of 'uint32_t' for unsigned int. Issue
detected by checkpatch.

Signed-off-by: Rehas Sachdeva <aquannie@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: Change 'x != NULL' to 'x'

Changes the explicit comparison to NULL from 'x != NULL' to 'x'. Issue detected
by checkpatch.

Signed-off-by: Rehas Sachdeva <aquannie@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: fix block comment style and spelling issues in ddk750_chip.c

Fix the following warning types:
 - line length
 - block comment line * prefix
 - trailing */ on a separate line
found by the checkpatch.pl tool in multiple block comments.

Fix a single spelling error in a comment.

Signed-off-by: Moshe Green <mgmoshes@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: fix line length coding style issues in ddk750_chip.c

Fix multiple line length warnings found by the checkpatch.pl tool
in ddk750_chip.c.

Signed-off-by: Moshe Green <mgmoshes@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: sm750fb: Remove unnecessary blank line

Remove unnecessary blank line.
This patch is detected by checkpatch.pl script .
CHECK: Blank lines aren't necessary before a close brace '}'

Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: wlan-ng: Use !x instead of x == NULL.

Use !x instead of x == NULL.
This issue was found by checkpatch.

Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon: use defines instead of magic numbers

The ugly magic number 65392 is waiting for CVMX_IPD_MAX_MTU
to appear in the mips tree.

Signed-off-by: Asbjoern Sloth Toennesen <asbjorn@asbjorn.st>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: clean function declarations in class_obd.c up

We get 2 warnings when building kernel with W=1:

drivers/staging/lustre/lustre/obdclass/linux/linux-module.c:413:5: warning: no previous prototype for 'class_procfs_init' [-Wmissing-prototypes]
drivers/staging/lustre/lustre/obdclass/linux/linux-module.c:449:5: warning: no previous prototype for 'class_procfs_clean' [-Wmissing-prototypes]

In fact, both functions are declared in
drivers/staging/lustre/lustre/obdclass/class_obd.c,but should be
declared in a header file, thus can be recognized in other file.

So this patch moves the declarations into
drivers/staging/lustre/lustre/include/obd_class.h.

Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Fix indentation

Fixes checkpatch.pl warning: Statements should start on a tabstop.

Signed-off-by: Rehas Sachdeva <aquannie@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Remove unnecessary 'return'

Remove unnecessary void return at the end of a function. Issue detected
by checkpatch.

Signed-off-by: Rehas Sachdeva <aquannie@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Change 'seq_printf' to 'seq_puts'

Fixes checkpatch.pl warning: Prefer seq_puts to seq_printf.
This can be done as both have same type of first two arguments in their
function definition.

Signed-off-by: Rehas Sachdeva <aquannie@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Change 'unsigned' to 'unsigned int'

Fixes checkpatch.pl warning:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'

Signed-off-by: Rehas Sachdeva <aquannie@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Fix block comment style

Fixes checkpatch.pl warning:
WARNING: Block comments use a trailing */ on a separate line.

Signed-off-by: Rehas Sachdeva <aquannie@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Add space b/w concatenated strings

Fixes checkpatch.pl warning:
CHECK: Concatenated strings should use spaces between elements

Signed-off-by: Rehas Sachdeva <aquannie@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: hdm-dim2: monitor atx DBR space

This patch implements a workaround for a DIM2 issue where the device
macro, in case the asynchronous channel sends data (to MOST), sporadically
duplicates the synchronous blocks with a size of half the synchronous DBR
buffer.

The patch monitors the size of the unused asynchronous Tx DBR memory
(that includes the ping and pong sizes) to prevent the potential DBR
overflow for the asynchronous Tx DBR buffer.

The patched DIM2 HDM expects that the platform driver delivers the 2nd
platform irq (index 1) as the mlb_int of the DIM2 macro.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: hdm-dim2: fix dim2-ip interrupt names

This patch fixes the DIM2 IP interrupt names.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: hdm-dim2: remove clearance of pending MLB interrupt

This patch removes unnecessary clearing of a pending mlb_int from the
service routine for ahb interrupt.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: hdm-dim2: delete error code from logging message

This patch removes the logging of the returned error code of function
dim2_probe as it is done by the calling function.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: hdm-dim2: rename function

This patch renames the function dim_service_irq. It subsitutes the name
with the more suitable identifier dim_service_ahb_int_irq.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: hdm-dim2: remove structure member

This patch removes the member irq_ahb0 of the structure dim2_hdm, since
its job is suitably done by a simple auto variable.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: hdm-dim2: round up DBR memory for async/ctrl

As the DBR memory is allocated in units of DBR_BLOCK_SIZE, it is more
efficient to configure the DIM2 IP to use whole blocks of the DBR memory.
This patch ceils the DBR memory size used by the DIM2 IP for async/ctrl
channels.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: hdm-dim2: double size of DBR buffer

This patch increases the size of the asynchronous and control DBR buffers
in the Tx path to twice the max. message size. This patch is needed to
increase the throughput for big messages.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: hdm-dim2: relocate variable declarations

This patch eliminates nested variable declarations by putting them at
the beginning of the function in order to flatten the code.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: hdm-dim2: remove macro ENABLE_HDM_TEST

This patch removes the macro ENABLE_HDM_TEST, which was needed while
doing DIM2-HAL simulations. But these are not conducted anymore.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: hdm-dim2: fix channel configuration

The DIM2 HDM checks the parameters passed to the function
configure_channel() and adapts the buffer sizes of the configuration
according to the hardware limitation. This patch is needed to init
the HAL layer with the correct values.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: ion: Make ION_OF depend on OF_ADDRESS

The Ion platform code uses of_platform_device_create which has
dependencies on OF_ADDRESS. Depending on OF is not sufficient

Building sparc64:allmodconfig ... failed
--------------
Error log:
...
drivers/built-in.o: In function `ion_parse_dt':
(.text+0x11aa2c): undefined reference to `of_platform_device_create'

Add a dependency on OF_ADDRESS

Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Laura Abbott <labbott@redhat.com>
Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'iio-for-4.9b' of git://git./linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Second set of iio new device support, features and cleanups for the 4.9 cycle.

New device support
* ad8801 dac
  - new driver supporting ad8801 and ad8803 DACs.
* adc12138
  - new driver supporting TI adc12130/adc12132 and adc12138 ADCs.
* ltc2485 adc
  - new driver
* mxc6255
  - add support for the mxc6225 part name and fixup the ID check so it works.
* vz89x VOC sensor
  - add support for the vz89te part which drops the voc_short channel and adds
    CRCs compared to other supported parts.

New features
* core
  - immutable triggers.  These effectively grant exclusive control over a
    trigger. The typical usecase is a device representing an analog part
    (perhaps a MUX) that needs to control the sampling of a downstream
    ADC.
  - resource managed trigger registration and triggered_buffer_init.
  - iio_push_event now protected against case of the event interface
    registration not having yet occured.  Only matters if an interrupt
    can occur during this window - might happen on shared interrupt lines.
  - helper to let a driver query if the trigger it is using is provided by
    itself (using the convention of both device and trigger having the same
    parent).
* tools
  - iio-utils. Used channel modifier scaling in preference to generic scaling
    when both exist.
* at91-adc
  - Add support for touchscreen switches closure time needed by some newer
    parts.
* stx104
  - support the ADC channels on this ADC/DAC board. As these are the primary
    feature of the board also move the driver to the iio/adc directory.
* sx9500
  - device tree bindings.

Cleanups / Fixes
* ad5755
  - fix an off-by-one on devnr limit check (introduced earlier this cycle)
* ad7266
  - drop NULL check on devm_regulator_get_optional as it can't return NULL.
* ak8974
  - avoid an unused functional warning due to rework in PM core code.
  - remove .owner field setting as done by i2c_core.
* ina2xx
  - clear out a left over debug field from chip global data.
* hid-sensors
  - avoid an unused functional warning due to rework in PM core code.
* maxim-thermocouple
  - fix non static symbol warnings.
* ms5611
  - fetch and enable regulators unconditionally when they aren't optional.
* sca3000
  - whitespace cleanup.
* st_sensors
  - fetch and enable regulators unconditionally rather than having them
    supported as optional regulators (missunderstanding on my part amongst
    others a while back)
  - followup to previous patch fixes error checking on the regulators.
  - mark symbols static where possible.
  - use the 'is it my trigger' help function.  This prevents the odd case
    of another device triggering from the st-sensors trigger whilst the
    st-sensors trigger is itself not using it but rather using say an hrtimer.
* ti-ads1015
  - add missing of_node_put.
* vz89x
  - rework to all support of new devices.
  - prevent reading of a corrupted buffer.
  - fixup a return value of 0/1 in a bool returning function.

Address updates
- Vlad Dogaru email address change.

staging: fwserial: fix checkpatch permission warnings

Fix the following warnings:
Symbolic permissions are not preferred. Consider using octal permissions.

Signed-off-by: Simon Chopin <chopin.simon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: wilc1000: Remove struct typedef

Remove typedef from structure tstrRSSI as using typedef for
structures is not preferred.
Found using coccinelle:

@r1@
type T;
@@

typedef struct { ... } T;

@script:python c1@
T2;
T << r1.T;
@@
if T[-2:] =="_t":
  coccinelle.T2 = T[:-2];
  print T
else:
  coccinelle.T2=T;

@r2@
type r1.T;
identifier c1.T2;
@@
-typedef
struct
+ T2
{ ... }
-T
;

@r3@
type r1.T;
identifier c1.T2;
@@
- T
+ struct T2

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vme/devices: vme_user.c: fix: converted decimal permissions to octal

Ran checkpatch.pl -f vme_user.c
Fixed: ERROR: Use 4 digit octal (0777) not decimal permissions

Signed-off-by: Ryan Swan <ryan@ryanswan.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: gs_fpga_boot: Remove multiple blank lines

This patch fixes the following checkpatch warning for the gs_fpgaboot
driver:
CHECK: Please don't use multiple blank lines.

Signed-off-by: sayli karnik <karniksayli1995@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ks7010: Remove the explicit NULL comparison

The patch removes the explicit null comparisons entirely for the ks7010 driver.
This was detected by checkpatch.pl

Signed-off-by: sayli karnik <karniksayli1995@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: netlogic: Make net_device_ops const

This patch fixes the checkpatch.pl warning:

WARNING: struct net_device_ops should normally be const

Signed-off-by: Mike Kofron <mpkofron@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: vt6655: Remove unused function vnt_key_init_table

The function vnt_key_init_table is not used anywhere in the kernel.
Therefore, remove the function definition and prototype.
Grepped to find occurences.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: slicoss: add new line after struct declaration

checkpatch generates a warning for no blank line after struct
declaration. Inserted a new line.

Signed-off-by: Gargi Sharma <gs051095@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: core: constify structure member

This patch adds the const qualifier to the declaration of the member
name_suffix of structure most_channel_capability. It is needed since it
points to string literals.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: core: show all linked channels

This patch is needed to have all linked channels being reported by the
show() function of the attribute file add_link. Currently user space can
only read back the latest link that has been established to a certain
channel.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: comedi: drivers: Delete NULL check before pci_dev_put

The function pci_dev_put checks whether its argument is NULL and returns
immediately. Therefore, NULL test before the call if not needed.
Found using coccinelle:
@@
expression x;
@@

- if(x)
- pci_dev_put(x);
+ pci_dev_put(x);

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_fops: coding style fixes

- Fixed coding style in comedi_fops.c Symbolic to octal permission.

Signed-off-by: Matias Mucciolo <mmucciolo@suteba.org.ar>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>