Felix Fietkau [Sat, 31 Oct 2015 09:30:14 +0000 (09:30 +0000)]
malta: set CPU_TYPE:=24kc.
There are instructions (e.g. wsbh) only available in MIPS32R2 which is
the isa level used by many MIPS targets in OpenWrt. As we use the malta
target mostly for development and testing purposes, setting the CPU_TYPE
to 24Kc will make the emulation more real.
The following is output from qemu-system-mipsel 2.3.0
root@OpenWrt:/# cat /proc/cpuinfo | grep 'cpu model\|isa'
cpu model : MIPS 24Kc V0.0 FPU V0.0
isa : mips1 mips2 mips32r1 mips32r2
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 47324
Felix Fietkau [Sat, 31 Oct 2015 09:30:03 +0000 (09:30 +0000)]
target.mk: add optimization flags for MIPS 24Kc.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 47323
Felix Fietkau [Sat, 31 Oct 2015 09:29:57 +0000 (09:29 +0000)]
generic: fix unrecognized opcode wsbh when building for MIPS16.
The issue was found and reported by hynman [1] when compiling reaver for ar71xx
(Big Endian MIPS).
{standard input}: Assembler messages:
{standard input}:79: Error: unrecognized opcode `wsbh $2,$2'
{standard input}:90: Error: unrecognized opcode `wsbh $3,$17'
{standard input}:208: Error: unrecognized opcode `wsbh $2,$2'
make[3]: *** [builder.o] Error 1
The patch was already in upstream since kernel release 4.3-rc5.
[1] https://github.com/openwrt/packages/commit/
1e29676a8ac74f797f8ca799364681cec575ae6f#commitcomment-
12901931
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 47322
Felix Fietkau [Sat, 31 Oct 2015 09:29:48 +0000 (09:29 +0000)]
ar71xx/image: remove old unused build code for TPLINK
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 47321
Felix Fietkau [Sat, 31 Oct 2015 09:29:38 +0000 (09:29 +0000)]
ar71xx/image: remove old unused build code for TPLINKOLD
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 47320
Felix Fietkau [Sat, 31 Oct 2015 09:29:25 +0000 (09:29 +0000)]
ar71xx/image: migrate tl-wr841nd-v1.5 to new build step using squashfs+jffs2 instead of squashfs-only
All other tplink images use squashfs+jffs2. I don't see any reason why
this board should use squashfs-only
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 47319
Felix Fietkau [Sat, 31 Oct 2015 09:29:18 +0000 (09:29 +0000)]
ar71xx/image: remove old unused build step TPLINK-64K
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 47318
Felix Fietkau [Sat, 31 Oct 2015 09:29:09 +0000 (09:29 +0000)]
ar71xx/image: migrate tl-wdr6500-v2 to new image build steps
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 47317
Felix Fietkau [Sat, 31 Oct 2015 09:29:01 +0000 (09:29 +0000)]
ar71xx/image: refactor templates tplink-chn-v2
SVN-Revision: 47316
Felix Fietkau [Sat, 31 Oct 2015 09:28:50 +0000 (09:28 +0000)]
ar71xx/image: introduce TPLINK_HEADER_VERSION variable for tplink image
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 47315
Felix Fietkau [Sat, 31 Oct 2015 09:28:42 +0000 (09:28 +0000)]
oxnas: image: Remove custom mkfs targz override as base should be fine now
It was wrong anyway, missing file sort order parameter which was fixed
in base month ago.
Signed-off-by: Petr Štetiar <ynezz@true.cz>
SVN-Revision: 47314
Felix Fietkau [Sat, 31 Oct 2015 09:28:34 +0000 (09:28 +0000)]
kirkwood: image: Remove custom mkfs targz override as base should be fine now
It was wrong anyway, missing file sort order parameter which was fixed
in base month ago.
Signed-off-by: Petr Štetiar <ynezz@true.cz>
SVN-Revision: 47313
Felix Fietkau [Sat, 31 Oct 2015 09:28:25 +0000 (09:28 +0000)]
imx6: image: Remove custom mkfs targz override as base should be fine now
It was wrong anyway, missing file sort order parameter which was fixed
in base month ago.
Signed-off-by: Petr Štetiar <ynezz@true.cz>
SVN-Revision: 47312
Felix Fietkau [Sat, 31 Oct 2015 09:28:14 +0000 (09:28 +0000)]
include/image.mk: Use PROFILE_SANITIZED in targz image task
Signed-off-by: Petr Štetiar <ynezz@true.cz>
SVN-Revision: 47311
Felix Fietkau [Sat, 31 Oct 2015 09:28:05 +0000 (09:28 +0000)]
oxnas: image: Refactor sanitize_profile_name using PROFILE_SANITIZED variable
Signed-off-by: Petr Štetiar <ynezz@true.cz>
SVN-Revision: 47310
Felix Fietkau [Sat, 31 Oct 2015 09:27:56 +0000 (09:27 +0000)]
kirkwood: image: Refactor sanitize_profile_name using PROFILE_SANITIZED var
Signed-off-by: Petr Štetiar <ynezz@true.cz>
SVN-Revision: 47309
Felix Fietkau [Sat, 31 Oct 2015 09:27:49 +0000 (09:27 +0000)]
imx6: image: Refactor sanitize_profile_name using PROFILE_SANITIZED variable
Signed-off-by: Petr Štetiar <ynezz@true.cz>
SVN-Revision: 47308
Felix Fietkau [Sat, 31 Oct 2015 09:27:04 +0000 (09:27 +0000)]
include/image.mk: Introduce sanitized profile variable
Making common code reusable as there's a lot of duplicate code in imx6,
kirkwood and oxnas archs.
Signed-off-by: Petr Štetiar <ynezz@true.cz>
SVN-Revision: 47307
Felix Fietkau [Fri, 30 Oct 2015 22:32:49 +0000 (22:32 +0000)]
ramips: fix for kernel 4.0 napi repoll need return budgets number
Signed-off-by: Michael Lee <igvtee@gmail.com>
SVN-Revision: 47306
Felix Fietkau [Fri, 30 Oct 2015 22:32:41 +0000 (22:32 +0000)]
x86/generic: enable radeon drm driver
This enables modesetting for radeon based boards.
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
SVN-Revision: 47305
Felix Fietkau [Fri, 30 Oct 2015 22:32:19 +0000 (22:32 +0000)]
x86/generic: enable pata_atiixp driver
This enables booting from devices that use an ATI PATA controller for
the boot device, such as the embedded CF cards in Fujitsu-Siemens Futro
thin-clients.
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
SVN-Revision: 47304
Felix Fietkau [Fri, 30 Oct 2015 22:32:12 +0000 (22:32 +0000)]
x86/generic: refresh subtarget kernel config
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
SVN-Revision: 47303
Felix Fietkau [Fri, 30 Oct 2015 22:32:04 +0000 (22:32 +0000)]
kernel: add some missing symbols for 4.3
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 47302
Felix Fietkau [Fri, 30 Oct 2015 22:31:47 +0000 (22:31 +0000)]
realview: Create ext4 image by default
Following the additions in r46924, enable the 'ext4' feature for
realview target so the ext4 image is created by default.
Signed-off-by: Dov Murik <dov.murik@gmail.com>
SVN-Revision: 47301
Felix Fietkau [Fri, 30 Oct 2015 22:31:29 +0000 (22:31 +0000)]
tools/pkg-config: update to 0.29
Release announcement:
http://lists.freedesktop.org/archives/pkg-config/2015-September/001019.html
Drop patches, as they have been implemented upstream.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Signed-off-by: Felix Fietkau <nbd@openwrt.org> [fix OSX compatibility]
SVN-Revision: 47300
Felix Fietkau [Fri, 30 Oct 2015 22:31:21 +0000 (22:31 +0000)]
tools/quilt: update to 0.64
Update quilt to version 0.64.
Changelog: http://git.savannah.gnu.org/cgit/quilt.git/tree/NEWS?id=v0.64
Refresh patches. (scripts/inspect.in has been removed upstream)
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
SVN-Revision: 47299
Felix Fietkau [Fri, 30 Oct 2015 22:31:09 +0000 (22:31 +0000)]
tools/xz: update to 5.2.2
Update xz to version 5.2.2.
Add a secondary download location.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
SVN-Revision: 47298
Felix Fietkau [Fri, 30 Oct 2015 22:31:05 +0000 (22:31 +0000)]
mac80211: update regulatory database to master-2015-10-22
Signed-off-by: Andrej Vlasic <andrej.vlasic0@gmail.com>
SVN-Revision: 47297
Felix Fietkau [Fri, 30 Oct 2015 22:01:27 +0000 (22:01 +0000)]
build: make mkfs-* depend on kernel installation to fix parallel build issues
Reported-by: Petr Štetiar <ynezz@true.cz>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47296
Felix Fietkau [Fri, 30 Oct 2015 22:01:22 +0000 (22:01 +0000)]
ath10k-firmware: add qca99x0 firmware
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47295
Felix Fietkau [Fri, 30 Oct 2015 22:01:18 +0000 (22:01 +0000)]
ath10k: split out ath10k firmware into a separate source package and .ipk
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47294
Felix Fietkau [Fri, 30 Oct 2015 22:01:04 +0000 (22:01 +0000)]
linux-firmware: minor makefile cleanup
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47293
Felix Fietkau [Fri, 30 Oct 2015 15:32:54 +0000 (15:32 +0000)]
samba: convert init script to procd, add reload support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47292
Felix Fietkau [Fri, 30 Oct 2015 15:20:41 +0000 (15:20 +0000)]
iproute2: fix compile with uClibc-ng
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 47291
Felix Fietkau [Fri, 30 Oct 2015 15:20:12 +0000 (15:20 +0000)]
build: Allow kernel modules to set build ID debug symbol
This change adds support for specifying a build ID for kernel modules.
This is done by setting PKG_BUILD_ID to a hexadecimal string, which will
then be passed to the kernel linker. In addition, when this flag is set,
the build ID debug symbol (.note.gnu.build-id) will not be stripped from
the kernel module. This symbol is exported in sysfs by the kernel (if
the kernel is compiled with CONFIG_KALLSYMS) and so can be used to
uniquely identify a version of a kernel module in a running kernel. This
is useful for keeping track of different versions of a module when doing
experiments and development.
Modules that specify the build ID will be ~100 bytes larger (depending
on the length of the build ID specified). There is no size difference
for kernel modules that do not set this variable.
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
SVN-Revision: 47290
Felix Fietkau [Fri, 30 Oct 2015 15:18:22 +0000 (15:18 +0000)]
busybox: fix non-portable invocation of mktemp
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47289
Felix Fietkau [Fri, 30 Oct 2015 15:18:17 +0000 (15:18 +0000)]
busybox: update to version 1.24.1
Patches applied upstream and dropped:
280-fix_find_regression.patch
300-ip-addr-improvements.patch
Fixed upstream:
290-ash-fix-a-regression-in-handling-local-variables.patch (see thread: http://lists.busybox.net/pipermail/busybox/2015-April/082783.html)
Signed-off-by: Magnus Kroken <mkroken@gmail.com>
SVN-Revision: 47288
Felix Fietkau [Fri, 30 Oct 2015 15:18:03 +0000 (15:18 +0000)]
mac80211: add pending ath9k/ath10k patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47287
Felix Fietkau [Fri, 30 Oct 2015 15:17:56 +0000 (15:17 +0000)]
mac80211: update to wireless-testing 2015-10-26
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47286
Felix Fietkau [Fri, 30 Oct 2015 15:17:47 +0000 (15:17 +0000)]
relayd: update to the latest version, fixes some issues found by Coverity
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47285
Felix Fietkau [Fri, 30 Oct 2015 15:17:41 +0000 (15:17 +0000)]
kernel: backport some bcma header file definitions from wireless-testing
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47284
Felix Fietkau [Fri, 30 Oct 2015 15:17:34 +0000 (15:17 +0000)]
kernel: add missing config symbol
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47283
Rafał Miłecki [Fri, 30 Oct 2015 14:44:06 +0000 (14:44 +0000)]
bcm53xx: add missing Netgear R8000 LEDs
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 47282
Rafał Miłecki [Fri, 30 Oct 2015 12:55:37 +0000 (12:55 +0000)]
bcm53xx: add workaround for Netgear R8000 network
According to the info from NVRAM we should use port 8 for the CPU (and
interface eth2). Unfortunately it doesn't work right now, so lets switch
to the port 5.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Forwardport of r46586 from 15.05
SVN-Revision: 47281
Steven Barth [Thu, 29 Oct 2015 15:16:06 +0000 (15:16 +0000)]
target: remove nathelpers from default images (legacy)
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 47280
Imre Kaloz [Thu, 29 Oct 2015 12:11:58 +0000 (12:11 +0000)]
mwlwifi: upgrade to 10.3.0.12
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 47279
Jo-Philipp Wich [Mon, 26 Oct 2015 15:28:05 +0000 (15:28 +0000)]
tools: quilt: fix perl interpreter line (#20802)
When using '/usr/bin/env' in a shebang it is not possible to specify
additional flags for the interpreter. Remove '-w' switches and add
'use warnings;' instead.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47278
John Crispin [Mon, 26 Oct 2015 11:56:16 +0000 (11:56 +0000)]
modules: crypto-rng changes additions for kernel 4.3
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 47276
John Crispin [Mon, 26 Oct 2015 11:54:56 +0000 (11:54 +0000)]
kernel: add support for KERNEL_CGROUP_PIDS
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 47275
John Crispin [Mon, 26 Oct 2015 11:54:15 +0000 (11:54 +0000)]
modules: package VIA AC97 modules
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 47274
John Crispin [Mon, 26 Oct 2015 11:53:57 +0000 (11:53 +0000)]
modules: enable crypto hardware modules
set CONFIG_CRYPTO_HW=y to enable build of crypto-hw modules.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 47273
John Crispin [Mon, 26 Oct 2015 10:39:53 +0000 (10:39 +0000)]
generic: fix adm6996 init
Kernel 3.14 added aditional genphy_soft_reset phy reset to phy_init_hw in drivers/net/phy/phy_device.c
Since adm6996 does in driver soft reset and doesn't use BMCR_RESET for soft reset
add dummy soft_reset callback to adm6996 driver, like it is done in ar8216.
This fixes ticket #20147
Signed-off-by: Andrej Vlasic <andrej.vlasic0@gmail.com>
SVN-Revision: 47272
John Crispin [Mon, 26 Oct 2015 10:39:48 +0000 (10:39 +0000)]
uClibc: enable xattr support to make feature sets of libc implementations closer to each other
Size increase is about 3-4k: this is how big xattr.os in uClibc after stripping is.
Signed-off-by: Maxim Storchak <m.storchak@gmail.com>
SVN-Revision: 47271
John Crispin [Mon, 26 Oct 2015 10:39:41 +0000 (10:39 +0000)]
kernel: Fix environment pointer setup in ar71xx/ath79
Observed on ar71xx/ath79 platforms such as Ubiquiti RouterStations.Reported in #20642.:
(https://dev.openwrt.org/ticket/20642).
If embedded command-line text exists with CONFIG_IMAGE_CMDLINE_HACK=y,firmware
init doesn't initialize environment pointer (fw_init_cmdline not called).
arcs_cmdline is not initialized before calling strlcat.
Signed-off-by: Ted Hess <thess@kitschensync.net>
Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 47270
John Crispin [Mon, 26 Oct 2015 09:02:09 +0000 (09:02 +0000)]
procd: update to latest git
this unbreaks glibc builds
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 47266
John Crispin [Mon, 26 Oct 2015 09:02:03 +0000 (09:02 +0000)]
libpcap: USB support by default if usbmon is enabled
If building usbmon support then you'll likely want to have
USB support in libpcap as well.
Signed-off-by: Bjørn Mork <bjorn@mork.no>
SVN-Revision: 47265
John Crispin [Mon, 26 Oct 2015 09:01:48 +0000 (09:01 +0000)]
omcproxy: fix PKG_LICENSE string
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 47264
John Crispin [Mon, 26 Oct 2015 09:01:41 +0000 (09:01 +0000)]
ar71xx: add support for TP-LINK TL-WR841N/ND v10
The TL-WR841N/ND v10 is mostly identical to the v9. Apart from some minor
changes, it contains a newer revision of the QCA9533 SoC and the CPU clock
is significantly higher.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 47263
John Crispin [Mon, 26 Oct 2015 09:01:34 +0000 (09:01 +0000)]
ar71xx: fix ath79_soc_rev value for QCA9531 ver. 2
ath9k expects to get revision id 2 for the QCA9531 ver. 2 rev. 0. This
fixes the very low TX power on some devices like the TP-LINK
TL-WR841ND v10.
As ath79_soc_rev is only used to get the revision number to ath9k on the
QCA9533, just set it to the expected value on the ver. 2.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Tested-by: Felix Kaechele <felix@kaechele.ca>
SVN-Revision: 47262
John Crispin [Mon, 26 Oct 2015 09:01:28 +0000 (09:01 +0000)]
ar71xx: Bitmain Antminer S1/S3 set GPIO for USB Power
Antminers using the stock bootloader will not hash without this GPIO set.
Applies to DD and CC
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
SVN-Revision: 47261
John Crispin [Mon, 26 Oct 2015 09:01:21 +0000 (09:01 +0000)]
brcm2708: copy overlays README to boot partition
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 47260
John Crispin [Mon, 26 Oct 2015 09:01:12 +0000 (09:01 +0000)]
brcm2708: update modules
- Add support for DAC+ Pro.
- Add kmod-smi-bcm2835 and kmod-smi-bcm2835-dev modules.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 47259
John Crispin [Mon, 26 Oct 2015 09:01:05 +0000 (09:01 +0000)]
brcm2708: update 4.1 patches
As usual, this patches were taken (and rebased) from
https://github.com/raspberrypi/linux/commits/rpi-4.1.y
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 47258
John Crispin [Mon, 26 Oct 2015 09:00:47 +0000 (09:00 +0000)]
brcm2708-gpu-fw: update to latest version
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 47257
John Crispin [Mon, 26 Oct 2015 09:00:42 +0000 (09:00 +0000)]
ramips: make the alsa driver register the codec
this allows using the codec even if it is not listed in the DTS
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 47256
John Crispin [Mon, 26 Oct 2015 09:00:35 +0000 (09:00 +0000)]
rb532: prepare switch to 4.1
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 47255
Hauke Mehrtens [Sun, 25 Oct 2015 22:46:46 +0000 (22:46 +0000)]
lantiq: add clk_round_rate()
This adds a basic implementation of clk_round_rate()
The clk_round_rate() function is called by multiple drivers and
subsystems now and the lantiq clk driver is supposed to export this,
but doesn't do so, this causes linking problems like this one:
ERROR: "clk_round_rate" [drivers/media/v4l2-core/videodev.ko] undefined!
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47254
Hauke Mehrtens [Sun, 25 Oct 2015 22:46:08 +0000 (22:46 +0000)]
bcm53xx: add clk tree driver
These patches are written by Broadcom and will be in mainline Linux
kernel soon. I had some problems to get them backported to kernel 4.1,
so currently they are only available for 4.3.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47253
Hauke Mehrtens [Sun, 25 Oct 2015 17:32:01 +0000 (17:32 +0000)]
kernel: update kernel 4.1 to version 4.1.11
https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.11
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47252
Hauke Mehrtens [Sun, 25 Oct 2015 16:43:14 +0000 (16:43 +0000)]
bcm53xx: add support basic for kernel 4.3
The files directory is now split up into the files which are needed for
every kernel version and the files only needed by kernel 4.1. The files
in files-4.1 are already merged into mainline kernel 4.3. This patch
only removed patches which were merged into mainline kernel 4.3.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47251
Hauke Mehrtens [Sun, 25 Oct 2015 16:13:34 +0000 (16:13 +0000)]
kernel: update kernel 4.3 to version 4.3-rc7
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47250
Hauke Mehrtens [Fri, 23 Oct 2015 22:38:07 +0000 (22:38 +0000)]
bcm53xx: add missing patch from r47248 for USB 3.0
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47249
Hauke Mehrtens [Fri, 23 Oct 2015 22:32:38 +0000 (22:32 +0000)]
bcm53xx: update USB 3.0 driver with version submitted upstream
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47248
Hauke Mehrtens [Fri, 23 Oct 2015 22:29:05 +0000 (22:29 +0000)]
bcm53xx: use Broadcom's proposed SMP implementation
This replaces our SMP implementation with a very similar version which
is Broadcom currently trying to get into mainline kernel.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47247
Hauke Mehrtens [Fri, 23 Oct 2015 22:26:49 +0000 (22:26 +0000)]
bcm53xx: Add BCM SVK DT files
Add device tree files for Broadcom Northstar based SVKs. Since the
bcm5301x.dtsi already exists, all that is necessary is the dts files to
enable the UARTs. With these files, the SVKs are able to boot to shell.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47246
Steven Barth [Thu, 22 Oct 2015 13:24:35 +0000 (13:24 +0000)]
bzip2: extend/fix the Host/Install rule to install libbz2.so files
It looks like the bzip2 package does not install any shared libs
and has no build rules to install any shared libs.
So, for the host build we're installing the libbz2 shared libs manually
so that other modules can link against them.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
SVN-Revision: 47245
Florian Fainelli [Thu, 22 Oct 2015 00:43:35 +0000 (00:43 +0000)]
tools: scons: Add alternate download URL
sourceforge.net sometimes produces the following tarball file while
being behind a HTTP proxy:
We're sorry -- the Sourceforge site is currently in Disaster Recovery
mode, and currently requires
the use of javascript to function. Please check back later.
Update to a regular FTP location that allows us to complete the
download.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 47244
John Crispin [Tue, 20 Oct 2015 18:16:05 +0000 (18:16 +0000)]
uhttpd: update to latest git HEAD
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 47240
John Crispin [Tue, 20 Oct 2015 07:09:20 +0000 (07:09 +0000)]
ramips: gpio-mt7621 was not handling irqs above 31 properly
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 47238
Jo-Philipp Wich [Tue, 20 Oct 2015 00:00:39 +0000 (00:00 +0000)]
kernel: force CONFIG_BT_HCIUART_ATH3K to y
The CONFIG_BT_HCIUART_ATH3K may not be "m", therfore we cannot inherit the
kmod selection state. Force the "CONFIG_BT_HCIUART_ATH3K" symbol to "y" in
order to avoid `warning: symbol value 'm' invalid for BT_HCIUART_ATH3K` and
subsequent kconfig stalls.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47237
John Crispin [Mon, 19 Oct 2015 18:18:12 +0000 (18:18 +0000)]
ar71xx: Send power to USB port on WNR2200
This patch fixes ticket #15267 by enabling power on the
WNR2200's USB port. At present, the USB port on the WNR2200
is non-functional due to it not receiving power.
This patch defines an additional GPIO pin, but none of the
current GPIO definitions have been modified.
Signed-off-by: Riley Baird <BM-2cVqnDuYbAU5do2DfJTrN7ZbAJ246S4XiX@bitmessage.ch>
SVN-Revision: 47236
John Crispin [Mon, 19 Oct 2015 17:55:25 +0000 (17:55 +0000)]
ar71xx: Add Gainstrong MiniBox v1.0 support to trunk
This patch supersedes the v1 from September 17th.
Bumping the patch version - the MiniBox profile showed up under M, but
since it's called 'Gainstrong MiniBox v1.0' now it looks out of place.
Renamed the profile to gs-minibox-v1.mk to fix that.
The following patch adds support for the Gainstrong MiniBox into trunk
(or 'Designated Driver' :D ).
Fixed items:
- Inverted LED polarity (OOLITE seems to suffer from the same problem).
- Changed uppercase MINIBOX_V1_ prefix as requested.
- Prefixes are now gs_minibox_ similar to gs_oolite_ (same vendor).
- Mention the vendor (Gainstrong) in code headers.
Compiles fine, has been confirmed working by owners on 15.05.
Question: I've seen some boards use tools/firmware-utils/src/mktplinkfw.c,
the MiniBox images build fine without, so I'm wondering: do I need to add
it in there as well? Any added benefit?
Thank you
Signed-off by: Stijn Segers <francesco.borromini@inventati.org>
SVN-Revision: 47234
John Crispin [Mon, 19 Oct 2015 10:10:51 +0000 (10:10 +0000)]
kernel: add usb-mass-storage-gadget driver package
This is another useful gadget driver that can allow an OTG port to act as a
mass storage device.
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>
SVN-Revision: 47225
John Crispin [Mon, 19 Oct 2015 10:10:41 +0000 (10:10 +0000)]
kernel: add mvsw61xx module package
Adds the package to select the mvsw61xx module present in the 3.18/4.0/4.1
kernels.
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>
SVN-Revision: 47224
John Crispin [Mon, 19 Oct 2015 10:10:20 +0000 (10:10 +0000)]
kernel: add ath3k module package
Adds a package for the ath3k kernel module, present in 3.18/4.0/4.1 kernels
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>
SVN-Revision: 47223
John Crispin [Mon, 19 Oct 2015 10:10:14 +0000 (10:10 +0000)]
firmware: linux-firmware: Add ibt-firmware and ar3k-firmware packages
Some bluetooth devices require firmware. Add intel bluetooth and ar3k for now.
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>
SVN-Revision: 47222
John Crispin [Mon, 19 Oct 2015 10:10:02 +0000 (10:10 +0000)]
ar71xx: Bitmain Antminer S1 & S3 cleanup
Sets the LEDs to boardname:color:led-name
Sets the LAN to eth0
Other corrections such as the Machine Name and HWIDs
v2 corrects the profile names in the Makefile and changes tabs to spaces
in the Makefile 'define Device/' like the other devices.
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
SVN-Revision: 47221
John Crispin [Mon, 19 Oct 2015 10:09:54 +0000 (10:09 +0000)]
generic: add 8139cp fixes, enable hardware csum/tso on 4.0+
This contains two sets of fixes for the 8139cp driver.
For all kernel versions older than 4.3, we can apply the fixes from the
4.3-rc4 kernel. In particular, these fix the TX timeout recovery which
is causing my Geos to lock up until the hardware watchdog kicks in.
For 4.0 and later kernels, we can also apply the additional improvements
which are going into 4.4 to fix and enable hardware checksum/TSO
offload. Backporting those to older kernels is non-trivial.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
SVN-Revision: 47220
John Crispin [Mon, 19 Oct 2015 10:09:46 +0000 (10:09 +0000)]
base-files: create /var/tmp on boot
FHS mandates presence of /var/tmp on compliant systems.
The lack of /var/tmp was discovered when using MIT Kerberos libraries
which default to that location for storing credentials cache.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
SVN-Revision: 47219
John Crispin [Mon, 19 Oct 2015 10:09:36 +0000 (10:09 +0000)]
oxnas: move gmac soc glue from mach to stmmac driver
Still a lot of kernel-version ifdef'ery, but imho that's easy to remove
once obsoleted and avoids duplicate code in the meantime.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 47218
John Crispin [Mon, 19 Oct 2015 10:09:30 +0000 (10:09 +0000)]
oxnas: prepare pinctrl for kernel >=4.2
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 47217
John Crispin [Mon, 19 Oct 2015 10:09:23 +0000 (10:09 +0000)]
oxnas: prepare irqchip driver for kernel >=4.2
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 47216
John Crispin [Mon, 19 Oct 2015 10:09:16 +0000 (10:09 +0000)]
oxnas: fix duplicate include in clk-oxnas
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 47215
John Crispin [Mon, 19 Oct 2015 10:09:07 +0000 (10:09 +0000)]
oxnas: remove obsolete __cpuinit
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 47214
John Crispin [Mon, 19 Oct 2015 10:08:56 +0000 (10:08 +0000)]
lantiq: Synchronize access to the DSL command pipe
Whenever two processes were executing different commands at the same
time then one of the commands sometimes got the response of the other
command.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 47213
John Crispin [Mon, 19 Oct 2015 10:08:50 +0000 (10:08 +0000)]
tools/firmware-utils: tplink-safeloader: add version 1.1 support to CPE210/220/510/520
The hardware is identical to version 1.0, add the new models to the support
list.
Also remove the empty line at the end of the support list, the current
stock images don't have it either.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 47212
John Crispin [Mon, 19 Oct 2015 10:08:44 +0000 (10:08 +0000)]
tools/firmware-utils: tplink-safeloader: fix support-list format, clean up vendor information
The first 4 bytes of the support list and the vendor information are
supposed to contain the length of these fields.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 47211
John Crispin [Mon, 19 Oct 2015 10:08:34 +0000 (10:08 +0000)]
tools/firmware-utils: tplink-safeloader: clean up code
There is no reason for the internal functions not to be static.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 47210
John Crispin [Mon, 19 Oct 2015 10:08:29 +0000 (10:08 +0000)]
lantiq: Print the status register whenever an error occurs
This should help finding potential problems with the SPI driver.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 47209
John Crispin [Mon, 19 Oct 2015 10:08:18 +0000 (10:08 +0000)]
lantiq: Fixed reading the number of RX FIFOs in the SPI driver
Until now the SPI driver used the TX bits for the RX FIFO. This seems
uncritical for now since both are equals on my devices (VR9), but this
could cause problems on other SoCs.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 47208
projects / openwrt / staging / kaloz.git / log