Felix Fietkau [Sat, 14 Mar 2015 05:38:14 +0000 (05:38 +0000)]
kernel: linux 3.19 also needs the network namespace related fd export patch (#19161)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44751
Felix Fietkau [Sat, 14 Mar 2015 02:00:50 +0000 (02:00 +0000)]
ath: fix selecting the module individually (#19162)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44750
Felix Fietkau [Sat, 14 Mar 2015 02:00:44 +0000 (02:00 +0000)]
mac80211: fix a rounding issue in minstrel MCS rate duration calculation
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44749
Felix Fietkau [Sat, 14 Mar 2015 02:00:36 +0000 (02:00 +0000)]
mac80211: improve powersave handling in the tx queue rework patch
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44748
John Crispin [Fri, 13 Mar 2015 08:39:08 +0000 (08:39 +0000)]
dnsmasq: enable pxe-prompt, pxe-service config options
DNSMASQ has the ability to provide a menu to a pxeboot system, using
the --pxe-prompt and --pxe-service configuration options. The current
init.d script converting the "dhcp" file to "dnsmasq.conf" does not
find these options, but they are supported. This patch thus enables
the options.
Signed-off-by: Derek LaHousse <dlahouss@mtu.edu>
SVN-Revision: 44747
John Crispin [Fri, 13 Mar 2015 08:38:56 +0000 (08:38 +0000)]
BusyBox: Netcat 1.10 compatibility require server option
Netcat 1.10 compatibility require server options
1.10 compatibility without server option
produce error "NO OPT l!" and completely not function
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
SVN-Revision: 44746
John Crispin [Fri, 13 Mar 2015 08:38:46 +0000 (08:38 +0000)]
relayd: bump to latest git HEAD
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44745
John Crispin [Fri, 13 Mar 2015 08:38:35 +0000 (08:38 +0000)]
dnsmasq: Make parameters optional in dhcpboot config
The --dhcp-boot option of dnsmasq does not require servername and serveraddress
arguments if the builtin tftp server is used.
Signed-off-by: Stefan Tomanek <stefan.tomanek+openwrt@wertarbyte.de>
SVN-Revision: 44744
John Crispin [Fri, 13 Mar 2015 08:38:25 +0000 (08:38 +0000)]
lldpd: make LLDP-MED, DOT1 and DOT3 extensions disable-able
The names for the config options were taken from lldpd's
configure.ac file.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
SVN-Revision: 44743
John Crispin [Fri, 13 Mar 2015 08:38:17 +0000 (08:38 +0000)]
ipset: add ipmark support
Below you'll find a patch to add ipmark module support to ipset.
Changeset 44671 already bumped ipset to version 6.24, but it's still
compiled without ipmark support. This is a requirement for mwan3 v1.6.
Signed-off-by: Jeroen Louwes <jeroen.louwes@gmail.com>
SVN-Revision: 44742
John Crispin [Fri, 13 Mar 2015 08:38:08 +0000 (08:38 +0000)]
ralink: support change tx/rx ring size
Signed-off-by: michael lee <igvtee@gmail.com>
SVN-Revision: 44741
John Crispin [Fri, 13 Mar 2015 08:38:01 +0000 (08:38 +0000)]
ralink: use random generate mac address instead of default one.
Signed-off-by: michael lee <igvtee@gmail.com>
SVN-Revision: 44740
John Crispin [Fri, 13 Mar 2015 08:37:45 +0000 (08:37 +0000)]
ralink: add wifi 5g dts info for cy-swr1100
Signed-off-by: michael lee <igvtee@gmail.com>
SVN-Revision: 44739
Felix Fietkau [Fri, 13 Mar 2015 05:17:06 +0000 (05:17 +0000)]
mac80211: fix a pointer handling error in the new tx queueing code
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44738
Felix Fietkau [Fri, 13 Mar 2015 03:02:34 +0000 (03:02 +0000)]
ath25: set myself as maintainer
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44737
Felix Fietkau [Fri, 13 Mar 2015 03:02:28 +0000 (03:02 +0000)]
Rename 'atheros' target to 'ath25'
Rename 'atheros' target to more precise 'ath25'.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44736
Felix Fietkau [Fri, 13 Mar 2015 03:02:21 +0000 (03:02 +0000)]
atheros: remove odd board check during image build
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44735
Felix Fietkau [Fri, 13 Mar 2015 03:02:17 +0000 (03:02 +0000)]
atheros: remove linux 3.14
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44734
Felix Fietkau [Fri, 13 Mar 2015 03:02:12 +0000 (03:02 +0000)]
atheros: switch to 3.18
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44733
Felix Fietkau [Fri, 13 Mar 2015 03:02:08 +0000 (03:02 +0000)]
atheros: v3.18: renumber backported patches
Move first 3 patches to 0xx numbers range to denote that this is
backported code and they should be removed when we update
kernel to version >= 3.19
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44732
Felix Fietkau [Fri, 13 Mar 2015 03:02:00 +0000 (03:02 +0000)]
atheros: v3.18: non-functional cleanup
To finally sync code with upsream cleanup registers headers, and update
several comments and kernel config symbols descriptions. No functional
changes.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44731
Felix Fietkau [Fri, 13 Mar 2015 03:01:50 +0000 (03:01 +0000)]
atheros: v3.18: cleanup includes
Remove odd and add missed includes.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44730
Felix Fietkau [Fri, 13 Mar 2015 03:01:42 +0000 (03:01 +0000)]
atheros: v3.18: rearrange code between patches
Cleanup board patch by moving code to specific patches, and factor out
leds to separate patch. No functional changes.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44729
Felix Fietkau [Fri, 13 Mar 2015 03:01:37 +0000 (03:01 +0000)]
atheros: v3.18: move GPIO patches behind PCI
Move GPIO patches behind PCI patch, since they are not yet merged
upstream.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44728
Felix Fietkau [Fri, 13 Mar 2015 03:01:31 +0000 (03:01 +0000)]
atheros: v3.18: switch to IRQ domain
Rework MISC and PCI IRQ controllers code to use IRQ domains and bitops.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44727
Felix Fietkau [Fri, 13 Mar 2015 03:01:21 +0000 (03:01 +0000)]
atheros: v3.18: update register names
Make register names more consistent, mostly add appropriate prefix
(AR5312_ or AR2315_) or _BASE suffix. Also add macro to simplify mask
and shift operation.
No functional changes.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44726
Felix Fietkau [Fri, 13 Mar 2015 03:01:17 +0000 (03:01 +0000)]
atheros: v3.18: remap flash for boardconfig parsing
Rework boardconfig handling code to honestly remap flash memory region.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44725
Felix Fietkau [Fri, 13 Mar 2015 03:01:11 +0000 (03:01 +0000)]
atheros: v3.18: make registers headers local
There are no external users (last one was PCI driver) for these headers,
so move them to arch directory. Few macroses from ar231x.h header moved
to devices.h and file was removed.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44724
Felix Fietkau [Fri, 13 Mar 2015 03:01:04 +0000 (03:01 +0000)]
atheros: v3.18: remap main SoC MMR memory
Honestly remap main SoC MMR mem and use accessor functions to
interact with registers. Now registers defined relatively to base
address (e.g. SDRAM controller base address).
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44723
Felix Fietkau [Fri, 13 Mar 2015 03:00:59 +0000 (03:00 +0000)]
atheros: v3.18: cleanup register headers
AFAIK, no one AR2315+ chip (AR2315, AR2316, AR2317, AR2318) does not
contain IR block, so remove IR registers definitions. Also remove few
unused macroses.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44722
Felix Fietkau [Fri, 13 Mar 2015 03:00:51 +0000 (03:00 +0000)]
atheros: v3.18: pass PCI IRQ and I/O mem via resources
Pass PCI IRQ and I/O memory ranges via platform device resources, this
change makes PCI controller driver independed from arch headers, so
also remove few includes.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44721
Felix Fietkau [Fri, 13 Mar 2015 03:00:43 +0000 (03:00 +0000)]
atheros: v3.18: remap PCI controller MMR memory
Honestly remap PCI controller MMR and use accessor functions to interact
with registers.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44720
Felix Fietkau [Fri, 13 Mar 2015 03:00:19 +0000 (03:00 +0000)]
atheros: v3.18: add context container for PCI driver
Add container and place all context specific variables and structure to
it.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44719
Felix Fietkau [Fri, 13 Mar 2015 03:00:06 +0000 (03:00 +0000)]
atheros: v3.18: move PCI enable code to arch
Move PCI host interface enable code to arch, since it touches generic
SoC registers outside the PCI MMR region.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44718
Felix Fietkau [Fri, 13 Mar 2015 02:59:54 +0000 (02:59 +0000)]
atheros: v3.18: rearrange PCI regs definitions
Move PCI controller configuration registers from generic header to
driver source. No functional changes.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44717
Felix Fietkau [Fri, 13 Mar 2015 02:59:43 +0000 (02:59 +0000)]
atheros: v3.18: relocate PCI host DMA base definition
Put AR2315_PCI_HOST_SDRAM_BASEADDR macro to DMA header, since this is
arbitrary value and not some hw specific constant. Also this relocation
decouples dma from HW specific header.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44716
Felix Fietkau [Fri, 13 Mar 2015 02:59:27 +0000 (02:59 +0000)]
atheros: v3.18: rework early initialization
Do not use prom_init() callback, do memory initialization in
plat_mem_setup() callback and move serial port configuration to
arch_initcall stage.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44715
Felix Fietkau [Fri, 13 Mar 2015 02:59:19 +0000 (02:59 +0000)]
atheros: v3.18: rearrange interrupt handling functions
No functional changes, just change functions order in source file.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44714
Felix Fietkau [Fri, 13 Mar 2015 02:59:04 +0000 (02:59 +0000)]
atheros: v3.18: change calls logic
Check SoC family (AR5312+ or AR2315+) before call instead of checking it
inside the called function. Also convert ar{5312,2315}_init_device()
function to void, since they both return zero and nobody care about
return value.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44713
Felix Fietkau [Fri, 13 Mar 2015 02:58:58 +0000 (02:58 +0000)]
atheros: v3.18: update names and declarations
Sync functions, variables and enums names with upstream. Mostly replace
'ar231x_' prefix by 'ath25_'.
No functional changes, except few 'int' -> 'unsigned' changes.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44712
Felix Fietkau [Fri, 13 Mar 2015 02:58:49 +0000 (02:58 +0000)]
atheros: v3.18: cleanup cpu-feature-overrides.h
Remove mention of undefined features.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44711
Felix Fietkau [Fri, 13 Mar 2015 02:58:37 +0000 (02:58 +0000)]
atheros: v3.18: remove eth platform device unused field
Ethernet controller driver don't use boarddata directly, so remove
corresponding field from its platform device structure.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44710
Felix Fietkau [Fri, 13 Mar 2015 02:58:24 +0000 (02:58 +0000)]
atheros: v3.18: remove odd header reset.h
This header provides prototype for function without realization and
users.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44709
Felix Fietkau [Fri, 13 Mar 2015 02:58:17 +0000 (02:58 +0000)]
atheros: v3.18: rename platform header
Rename ar231x_platform.h to ath25_platform.h
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44708
Felix Fietkau [Fri, 13 Mar 2015 02:57:59 +0000 (02:57 +0000)]
atheros: v3.18: rename kernel platform to ath25
Rename platform source directory and asm includes directory.
No functional changes.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44707
Felix Fietkau [Fri, 13 Mar 2015 02:57:51 +0000 (02:57 +0000)]
atheros: v3.18: rename ATHEROS_AR231X symbol to ATH25
This patch starts upsteam ath25 code backporting.
No functional changes.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44706
Felix Fietkau [Fri, 13 Mar 2015 02:57:41 +0000 (02:57 +0000)]
atheros: add v3.18 support
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44705
John Crispin [Thu, 12 Mar 2015 20:29:58 +0000 (20:29 +0000)]
glibc: make it more obvious that eglibc is a version of glibc
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44704
John Crispin [Thu, 12 Mar 2015 20:29:50 +0000 (20:29 +0000)]
glibc: remove accidentally commited folder
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44703
John Crispin [Thu, 12 Mar 2015 19:50:57 +0000 (19:50 +0000)]
toolchain: The glorious return of glibc, ver 2.21
It's the eglibc packaging with a bit of spit-polishing. And testing. :-)
[blogic: merged glibc and eglibc into 1 and made eglibc a glibc variant]
Signed-off-by: Jeff Waugh <jdub@bethesignal.org>
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44701
John Crispin [Thu, 12 Mar 2015 19:50:23 +0000 (19:50 +0000)]
busybox: Minor fix for glibc 2.21 compatibility
Signed-off-by: Jeff Waugh <jdub@bethesignal.org>
SVN-Revision: 44700
John Crispin [Thu, 12 Mar 2015 19:50:14 +0000 (19:50 +0000)]
fstools: bump to latest git HEAD
this makes fstools compile with latest glibc
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44699
John Crispin [Thu, 12 Mar 2015 19:50:00 +0000 (19:50 +0000)]
procd: bump to latest git HEAD
this makes procd compile with latest glibc
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44698
Felix Fietkau [Thu, 12 Mar 2015 16:21:53 +0000 (16:21 +0000)]
ath9k: fix a beacon enable handling bug
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44696
Felix Fietkau [Thu, 12 Mar 2015 15:27:44 +0000 (15:27 +0000)]
kernel: backport fib_trie improvements/fixes from 4.0-rc
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44695
John Crispin [Thu, 12 Mar 2015 10:07:01 +0000 (10:07 +0000)]
uClibc: fix syscall() for syscalls with 6 arguments on PowerPC
Patch from the uClibc master.
Fixes the package fastd on PowerPC.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 44694
John Crispin [Thu, 12 Mar 2015 10:06:53 +0000 (10:06 +0000)]
ar71xx: Ext LNA patch for TUBE2H and HORNET-UB targets
Signed-off-by: Christophe Prévotaux <c.prevotaux@rural-networks.com>
SVN-Revision: 44693
John Crispin [Thu, 12 Mar 2015 10:06:42 +0000 (10:06 +0000)]
ar71xx: Hornet UB GPIO WPS/Reset
This problem has existed at least since Attitude Adjustment and
is also present in trunk. Basically on the Hornet-UB board the
functionality of RESET and WPS have "switched places".
There are two tickets about the issue at dev.openwrt.org,
The solution suggested on them both is incomplete though
and introduces the following proglem:
Patching as suggested on #14136/#15282 will result in a situation
where simply pressing the RESET button on the bottom will cause
FACTORY RESET to be run. This is due to GPIO high/low state being
incorrect as a result of the above change and virtually the RESET
button is in the pressed-down state the entire time. When it is
then physically pressed, that causes the opposite, release, to be
triggered and since to the board it seemed that the button was
pressed long before it was released, the FACTORY RESET results.
The attached patch works as expected. I have verified both the
incorrect functionality as well as after fixing the issue as
described in the patch and flashing the resulting firmware to a
Hornet-UB board.
Signed-off-by: Janne Cederberg <janne.cederberg@gmail.com>
SVN-Revision: 44692
John Crispin [Thu, 12 Mar 2015 10:06:31 +0000 (10:06 +0000)]
ralink: resize the flash partition for FireWRT
Signed-off-by: wengbj <fl.service@t-firefly.com>
SVN-Revision: 44691
John Crispin [Thu, 12 Mar 2015 10:06:17 +0000 (10:06 +0000)]
ralink: MT7621 add i2c controller driver
ralink i2c driver is not working on MT7621 platform. Porting a new drivers from MTK's source code.
Signed-off-by: daixj <fl.service@t-firefly.com>
SVN-Revision: 44690
John Crispin [Thu, 12 Mar 2015 10:06:08 +0000 (10:06 +0000)]
lldpd: add support for 'readonly_mode'
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
SVN-Revision: 44689
John Crispin [Thu, 12 Mar 2015 10:06:01 +0000 (10:06 +0000)]
modules: set dwc2 gadget dependency for at91
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44688
John Crispin [Thu, 12 Mar 2015 10:05:54 +0000 (10:05 +0000)]
acx-mac80211: fails to build on cobalt
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44687
John Crispin [Thu, 12 Mar 2015 10:05:48 +0000 (10:05 +0000)]
cobalt: framebuffer device has moved
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44686
Mirko Vogt [Thu, 12 Mar 2015 00:39:50 +0000 (00:39 +0000)]
disable silent-rules by default
OpenWrt hides verbose output by default,
regardless of automake silent-rules being en-/disabled.
If we enable verbose output for package builds (V=s)
however, we'd like to see as most as possible.
Signed-off-by: Mirko Vogt <mirko@openwrt.org>
SVN-Revision: 44685
Mirko Vogt [Thu, 12 Mar 2015 00:39:48 +0000 (00:39 +0000)]
Do not use $(V) - force AM_V=1
Projects using silent-rules might otherwise fail to compile.
This is due to the following resulting Makefile code:
AM_V_P = $(am__v_P_$(V))
am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY))
am__v_P_0 = false
am__v_P_1 = :
Automake directly uses $(V) for variable name expansion
which fails if $(V) is set to sth. else other than '0' or '1'.
This patch forces automake to not take $(V) into account
but to always use the default config for verbosity.
A better approach would be to actually take $(V) into account,
however not just pass it through (AM_V='$(V)') but
set AM_V to 0 if $V=0 / unset and to 1 otherwise.
This plan however is foiled due to my frustration about
automake as well as my lack of m4 skills.
automake bug report: http://debbugs.gnu.org/cgi/bugreport.cgi?bug=20077
Signed-off-by: Mirko Vogt <mirko@openwrt.org>
SVN-Revision: 44684
John Crispin [Wed, 11 Mar 2015 17:58:53 +0000 (17:58 +0000)]
modules: make dwc2 only depend on gadget support for brcm2708
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44683
John Crispin [Wed, 11 Mar 2015 17:58:47 +0000 (17:58 +0000)]
uhttp: update to latest git HEAD
this add json-c 0.12, sorry forgot to push this earlier today
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44682
Felix Fietkau [Wed, 11 Mar 2015 17:32:29 +0000 (17:32 +0000)]
kernel: backport symbol export from r44653 to 3.14
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44681
Rafał Miłecki [Wed, 11 Mar 2015 17:32:02 +0000 (17:32 +0000)]
bcm53xx: fixup early device id 8012
Looks like the BCM53012 has a similar problem to the BCM53011.
Signed-off-by: Ian Kent <raven@themaw.net>
SVN-Revision: 44680
Rafał Miłecki [Wed, 11 Mar 2015 17:10:19 +0000 (17:10 +0000)]
bcm53xx: fix typo in bcm47xx sprom driver
Fix thinko' in the bcm47xx sprom driver.
Signed-off-by: Ian Kent <raven@themaw.net>
SVN-Revision: 44679
John Crispin [Wed, 11 Mar 2015 17:08:46 +0000 (17:08 +0000)]
kenrel: refresh patches
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44678
John Crispin [Wed, 11 Mar 2015 17:08:40 +0000 (17:08 +0000)]
lantiq: make the new dwc2 support only work for vr9
danube needs to be added
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44677
John Crispin [Wed, 11 Mar 2015 17:08:32 +0000 (17:08 +0000)]
lantiq: Convert Zyxel P-2812HNU-FX and TP-Link TD-W8970 to support dwc2
Here the device tree entry for ifxhcd is listed as compatible with one
supported in dwc2 (after patching the dwc driver appropriately).
A second entry is added to support the second core of the hcd. This
entry is listed to be compatible with only dwc2. Done this way there
should be backwards support for both hcd drivers (ltq-hcd and dwc2)
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
SVN-Revision: 44676
John Crispin [Wed, 11 Mar 2015 17:08:26 +0000 (17:08 +0000)]
lantiq: Use platform endianness when accessing dwc2 registers
This patch switches calls to readl/writel to their
dwc2_readl/dwc2_writel equivalents which preserve platform endianness.
This patch is necessary to access dwc2 registers correctly on big
endian systems such as the mips based SoCs made by Lantiq. Then dwc2
can be used to replace ifx-hcd driver for Lantiq platforms found e.g.
in OpenWrt.
The patch was autogenerated with the following commands:
$EDITOR core.h
sed -i "s/\<readl\>/dwc2_readl/g" *.c hcd.h hw.h
sed -i "s/\<writel\>/dwc2_writel/g" *.c hcd.h hw.h
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
SVN-Revision: 44675
John Crispin [Wed, 11 Mar 2015 17:08:15 +0000 (17:08 +0000)]
lantiq: Add sensible hw-defaults for dwc2
Lantiq driver does not work with autodetected fifo sizes so use ones
from original ltq-hcd driver in dwc2. Other values can be
autodetected.
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
SVN-Revision: 44674
John Crispin [Wed, 11 Mar 2015 17:08:08 +0000 (17:08 +0000)]
lantiq: Configure gpio power output pin when initializing dwc2 usb
Port gpio code from original ltq-hcd driver to dwc2.
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
SVN-Revision: 44673
John Crispin [Wed, 11 Mar 2015 17:08:02 +0000 (17:08 +0000)]
lantiq: Add usb initialization bits from ltq-hcd to platform init
Add VR9 specific usb initialization bits from ltq-hcd to platform
initialization.
This patch is more of a proof-of-concept than production quality
since the initialization registers are different on other lantiq
platforms.
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
SVN-Revision: 44672
John Crispin [Wed, 11 Mar 2015 16:41:58 +0000 (16:41 +0000)]
ipset: Bump to 6.24
Included you'll find a patch to bump ipset to version 6.24. This
version supports the ip,fwmark set, which is needed for mwan3 1.6.
Signed-off-by: Jeroen Louwes <jeroen.louwes@gmail.com>
SVN-Revision: 44671
Felix Fietkau [Wed, 11 Mar 2015 16:36:35 +0000 (16:36 +0000)]
mac80211: add missing header file
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44670
Felix Fietkau [Wed, 11 Mar 2015 16:25:09 +0000 (16:25 +0000)]
mac80211: remove obsolete patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44669
John Crispin [Wed, 11 Mar 2015 16:22:01 +0000 (16:22 +0000)]
cobalt: rename config file
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44668
John Crispin [Wed, 11 Mar 2015 15:56:51 +0000 (15:56 +0000)]
rpcd: update to latest git HEAD
adds 3 fixes from luka
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44666
John Crispin [Wed, 11 Mar 2015 15:56:34 +0000 (15:56 +0000)]
ar71xx: improve WD's My Net Wi-fi Range Extender image creation
Previously, the generated images for the My Net Wi-fi Range Extender
wouldn't always work (and panic) due to the fixed mtd offsets and
sizes for the kernel and rootfs. This patch fixes the problem by
utilizing the shared Cybertan's partition parser to recalculate
the mtd partitions for every image dynamically everytime.
Reported-by: Pascal Paradis <peparadis@yahoo.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
SVN-Revision: 44665
John Crispin [Wed, 11 Mar 2015 15:56:27 +0000 (15:56 +0000)]
ar71xx: generalize cybertan partition parser
By removing the NL16 signature check, the parser can be
utilized by other devices like the WD My Net Wi-fi Range
Extender.
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
SVN-Revision: 44664
John Crispin [Wed, 11 Mar 2015 15:56:15 +0000 (15:56 +0000)]
ar71xx: rename wrt160nl's trx partition parser
This patch renames the partition parser from
wrt160nl to more generic cybertan.
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
SVN-Revision: 44663
John Crispin [Wed, 11 Mar 2015 15:55:55 +0000 (15:55 +0000)]
ar71xx: fix WRT160NL and TP-Link partition parser patches
405-mtd-tp-link-partition-parser.patch was updating the
WRT160NL's partition parser Kconfig. This patch moves the
relevant change into the right file:
404-mtd-wrt160nl-trx-parser.patch
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
SVN-Revision: 44662
John Crispin [Wed, 11 Mar 2015 15:55:28 +0000 (15:55 +0000)]
ralink: FireWRT flash size is up to 16M.
Signed-off-by: wengbj <fl.service@t-firefly.com>
SVN-Revision: 44661
John Crispin [Wed, 11 Mar 2015 15:55:16 +0000 (15:55 +0000)]
ralink: add FireWRT IO multiplexing
Signed-off-by: wengbj <fl.service@t-firefly.com>
SVN-Revision: 44660
John Crispin [Wed, 11 Mar 2015 15:55:06 +0000 (15:55 +0000)]
ar71xx: fix switched WLAN LEDs on TP-LINK Archer C5/C7
ath10k is loaded before ath9k, so the 5GHz adapter becomes phy0.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 44659
John Crispin [Wed, 11 Mar 2015 15:54:52 +0000 (15:54 +0000)]
Fix 3.18.8 breakage of UBI devices with EOF marker (e.g. WNDR4300)
This commit re-adds a patch from 3.14 that is required for UBI block
devices with an EOF marker to be successfully mounted.
Signed-off-by: Oliver Smith <oliver@8.c.9.b.0.7.4.0.1.0.0.2.ip6.arpa>
SVN-Revision: 44658
John Crispin [Wed, 11 Mar 2015 15:54:33 +0000 (15:54 +0000)]
json-c: update to 0.12 and bump all depending services
Version 0.12 deprecates json_object_object_get and moves the header files around
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44657
Felix Fietkau [Wed, 11 Mar 2015 15:02:54 +0000 (15:02 +0000)]
mac80211: Use newer firmware for ath10k
Patch by Bryan Forbes <bryan@reigndropsfall.net>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44656
Felix Fietkau [Wed, 11 Mar 2015 15:02:47 +0000 (15:02 +0000)]
mac80211: update to wireless-testing 2015-03-09
Based on patch by Bryan Forbes <bryan@reigndropsfall.net>
Also update mt76 to update for API changes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44655
Felix Fietkau [Wed, 11 Mar 2015 15:02:32 +0000 (15:02 +0000)]
iw: update to 3.17
Patch by Bryan Forbes <bryan@reigndropsfall.net>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44654
Felix Fietkau [Wed, 11 Mar 2015 15:02:16 +0000 (15:02 +0000)]
kernel: backport an export required by newer compat-wireless versions
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44653
Imre Kaloz [Wed, 11 Mar 2015 12:20:03 +0000 (12:20 +0000)]
ppc44x: use the mtdsplit framework for the Taishan
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 44652
Luka Perkov [Tue, 10 Mar 2015 23:43:25 +0000 (23:43 +0000)]
base-files: firstboot: pass down arguments such as -y to jffs2reset
This brings back old behavior.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 44651
John Crispin [Tue, 10 Mar 2015 20:19:54 +0000 (20:19 +0000)]
ar71xx: fix gpio-latch driver
gpio api has changed. the remove call no longer returns a value.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44650
Luka Perkov [Tue, 10 Mar 2015 16:11:44 +0000 (16:11 +0000)]
ar71xx: refresh patches
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 44649
projects / openwrt / staging / wigyori.git / log