collectd: make compile time debug option configurable

Enables the compiler option that collectd is compiled with
debugging support. This is used at development stages to get
more messages from the collectd during development.

This option is default disabled.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
(cherry picked from commit a4f74eb11c1bfa6d708934b3885be589e39e8851)

collectd: fix COLLECTD_PLUGINS_SELECTED end of line

This removes the trailing back slash. This is not needed.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
(cherry picked from commit 416ba35d50e3381a23caf0ee0d0758a26e29a4f5)

collectd: fix smart disk detection

On my system the attribute DEVTYPE was not set. The plugin could not
read any data and the function call blocked forever on this function and did
not returned. By removing it, all block devices under `/sys/class/block`
were checked.

Block devices that do not support SMART were not evaluated. The
collected displays the following message.

smart plugin: checking SMART status of /dev/loop4.
smart plugin: unable to open /dev/loop4.

If you do not like this message, you could only enable device in the uci that
does support SMART.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
(cherry picked from commit 543a2a970c062c30ac33f49f67ea952eb0adbed3)

collectd: enable collectd-mod-smart

Switching on compilation for collectd smart plugin.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
(cherry picked from commit 092902a87ee14e3b4b0b37a4ddb81719ae27fcc8)

libatasmart: initial checkin

This library is required by the smart plugin of the collectd.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
(cherry picked from commit 87e52cf180921d1fb778298c1ee699e652639b79)

adblock: update to 4.1.1

* support the RPZ trigger 'RPZ-CLIENT-IP' to always allow/block certain
  clients based on their IP (currently only supported by bind!)
* avoid promiscuous mode in tcpdump setup for adblock reporting
* speed up dns report preparation
* support dns report mailing (/etc/init.d/adblock report mail)
* fix bind autodetection
* update LuCI-frontend (separate PR)
* update readme

Signed-off-by: Dirk Brenken <dev@brenken.org>
(cherry picked from commit c531b6daea6962c32813b5815105343a76746147)

squid: update to 4.14

Signed-off-by: Rosen Penev <rosenp@gmail.com>
(cherry picked from commit 682aebbaea976bee8aa5cc6e2d5818364256b33f)

psmisc: move killall to /usr/libexec and add ALTERNATIVES

Currently, this package can not be installed while using standard path
of busybox, because binary killall wants to be installed on the same
location as busybox.

Collision:
• /usr/bin/killall: busybox (new-file), psmisc (existing-file)

Many of these binaries, which provides alternatives were moved to
folder /usr/libexec like wget, sed, findutils, less.
So I moved killall to /usr/libexec and others leave in touch and added
ALTERNATIVES for it, because preinstall script is no longer necessary.

Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
(cherry picked from commit d8969e0fd1db2b2cb544cea19179a05aec5a9c28)

irqbalance: upgrade to version 1.8.0

Upgrade irqbalance to version 1.8.0

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
(cherry picked from commit 6631cfaa61ff75d97ef1a41c6ec031198103c7df)

Merge pull request #15441 from 1715173329/yq-2102

[openwrt-21.02] yq: Update to 4.7.0

yq: Update to 4.7.0

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
(backported from c4d27271adbbed1c779e212bc79ed351ddde6553)

atheepmgr: avoid libpciaccess dependency

HAVE_LIBPCIACCESS that is currently passed through MAKE_VARS to disable
building with libpciaccess can't be set through the environment.
Instead, use CONFIG_CON_PCI, which can be passed through the environment
and will disable libpciaccess.

Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
(cherry picked from commit 52837117541f9a35d60a0e4befac1960ea8675fe)

clamav: add libiconv dependencies when build with NLS

NLS means Native Language Support and when you have it enabled (it is
not default), clamav can not be compiled as it shows following error:

Package clamav is missing dependencies for the following libraries:
libiconv.so.2

Also, it is required that package libiconv-full is compiled first/before
than clamav and then try to compile clamav.

Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
(cherry picked from commit 87be6ffe6076778336f7db752fee0ef5f3f923e8)

openvpn-easy-rsa: add missing configfile

/etc/profile.d/50-openvpn-easy-rsa.sh was not listed as configfile
and changes were lost during upgrades.

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
(cherry picked from commit b0663e2959ff9dc37d0273aa3240a2ef0ed3c611)

collectd: enable cpufreq for rockchip target

Enable collectd-mod-cpufreq  for rockchip

Signed-off-by: Tomas Lara <tl849670@gmail.com>
(cherry picked from commit 6bd8d29b70bf3081d9fe0efe38a36b8f4fed77de)

Merge pull request #15414 from luizluca/21.02/ruby-3.0.1

[21.02] ruby: update to 3.0.1

bonding: accept list of slaves in uci list notation

Rework the bonding.sh protocol handler to accept slave interface names
encoded in uci list notation. Also replace ifconfig up/down with ip
link calls while we're at it.

Fixes: #11455
Fixes: https://github.com/openwrt/luci/issues/4473
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 57a77386de7dda12f60bf3021efcde7f059833c8)

ruby: update to 3.0.1

Fixes two CVEs:

CVE-2021-28965: XML round-trip vulnerability in REXML
CVE-2021-28966: Path traversal in Tempfile on Windows

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>

node: bump to v14.16.1

April 2021 Security Releases
- OpenSSL - CA certificate check bypass with X509_V_FLAG_X509_STRICT (High) (CVE-2021-3450)
- OpenSSL - NULL pointer deref in signature_algorithms processing (High) (CVE-2021-3449)
- npm upgrade - Update y18n to fix Prototype-Pollution (High) (CVE-2020-7774)

OpenSSL-related vulnerabilities do not affect the OpenWrt package. Because OpenWrt's OpenSSL shared library has been updated.

NODEJS_ICU_SMALL is default

Signed-off-by: Hirokazu MORIKAWA <morikw2@gmail.com>

safe-search: prevent duplicate cron job installation

This patch prevents multiple cron jobs from being created to run the
safe-search-maintenance script.

To reproduce this bug, perform the following:
  - Install safe-search
  - Perform an OpenWRT firmware upgrade (choose to preserve user settings)
  - Install safe-search again

Signed-off-by: Gregory L. Dietsche <gregory.dietsche@cuw.edu>
(cherry picked from commit 49535edffdd44e1db109f687a5f6e87b7fe0ea3c)

netdata: disable shared memory totals by default

Fix log spam:
daemon.err netdata[2090]: PROCFILE: Cannot open file '/proc/sysvipc/shm'
This is caused by a non existant /proc/sysvipc/shm because of the
CONFIG_PROC_STRIPPED option that is enabled by default in the kernel
generic target config

Signed-off-by: Tiago Gaspar <tiagogaspar8@gmail.com>
(cherry picked from commit 5f65d87bb7727be85e7d3e02045302d6eb76ff7e)

https-dns-proxy: bugfix: race condition with dnsmasq

Signed-off-by: Stan Grishin <stangri@melmac.net>

simple-adblock: update to 1.8.7-3

Signed-off-by: Stan Grishin <stangri@melmac.net>

adblock: fix games_tracking source url

Signed-off-by: Dirk Brenken <dev@brenken.org>
(cherry picked from commit ec20e9df96f74c29699aa2df8de63cb9a8c32a2a)

Merge pull request #15372 from farmergreg/21.02-safe-search

[21.02] safe-search: check for changed IP addresses weekly

Merge pull request #15371 from farmergreg/21.02-family-dns

[21.02] net/family-dns: Correct Reference to IPKG_INSTROOT

family-dns: Correct Reference to IPKG_INSTROOT

IPKG_INSTROOT was misspelled.

Signed-off-by: Gregory L. Dietsche <gregory.dietsche@cuw.edu>
(cherry picked from commit 1569131f952915eb12b91268bdf11df3a005fe75)

safe-search: check for changed IP addresses weekly

The current default of hourly is too fast. Some services such as
DuckDuckGo return IPs from a pool based on the user's location instead
of a fixed IP address. This change prevents unnecessary writes to the
flash memory by only updating once per week.

Signed-off-by: Gregory L. Dietsche <gregory.dietsche@cuw.edu>
(cherry picked from commit 7164ccf1553a990d8823bc545d970334fa0cd32e)

minisatip: add libdvbcsa support

Unconditionally enable with BUILD_PATENTED.

Simplify configure args.

Add missing PKG_CONFIG_DEPENDS

Signed-off-by: Rosen Penev <rosenp@gmail.com>
(cherry picked from commit 3d65773650e42c32a2c30d336f266f4fd8723d40)

openvpn: fix invoking user up & down commands from hotplug wrapper

This commit adds a number of fixes to the OpenVPN up/down hotplug command
wrapper which currently fails to actually invoke user defined up and down
commands for uci configurations not using external native configurations.

 - Use the `--setenv` to pass the user configured `up` and `down` commands
   as `user_up` and `user_down` environment variables respectively

 - Instead of attempting to scrape the `up` and `down` settings from the
   (possibly generated) native OpenVPN configuration in
   `/etc/hotplug.d/openvpn/01-user`, read them from the respective
   environment variables instead

 - Fix parsing of native configuration values in `get_openvpn_option()`;
   first try to parse a given setting as single quoted value, then as
   double quoted and finally as non-quoted, potentially white-space
   escaped one. This ensures that `up '/bin/foo'` is interpreted as
   `/bin/foo` and not `'/bin/foo'`

Ref: https://forum.openwrt.org/t/openvpn-up-down-configuration-ignored/91126
Supersedes: #15121, #15284
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry-picked from commit 7f065a94bb2663d32da7424c777a580d470728a0)

openvpn: add OpenVPN option server-poll-timeout

See https://www.mankier.com/8/openvpn#--server-poll-timeout

Signed-off-by: Alexander Egorenkov <egorenar-dev@posteo.net>
(cherry-picked from commit 5789faab67db9b2bde999d24a3dbc26c4a82981d)

openvpn: update to 2.5.1

Set myself as maintainer.

Signed-off-by: Magnus Kroken <mkroken@gmail.com>
(cherry-picked from commit 204c0901b83b20e34ed12e4ea41236e2261d4099)

curl: update to version 7.76.0

Fixes CVE-2021-22876 and CVE-2021-22890

Signed-off-by: Jan Pavlinec <jan.pavlinec@nic.cz>
(cherry picked from commit b971310549ac145f88d0251f03ffaa294f51c1e2)

libdvbcsa: add new package

Libdvbcsa is a free implementation of the DVB Common Scrambling Algorithm DVB/CSA - with encryption and decryption capabilities.

OpenWrt packages like `tvheadend` and `minisatip` can benefit from it.

Signed-off-by: Rafał Dzięgiel <rafostar.github@gmail.com>
(cherry picked from commit 51c5a8b4bcb5ba4d7447bd6ce77ddc41a46570aa)

python-pytest: update to version 6.2.3

Signed-off-by: Jan Pavlinec <jan.pavlinec@nic.cz>
(cherry picked from commit 4e979ceb6b5b78c136a5981e85e53f27d31510e3)

knot-resolver: update to version 5.3.1

Signed-off-by: Jan Pavlinec <jan.pavlinec@nic.cz>
(cherry picked from commit 3e3025b1910b158ce35921b4b6fc22579cf4824b)

youtube-dl: update to version 2021.4.7

Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
(cherry picked from commit 701ded952a2505d3c39184767d2d55d1e299ec0f)

zeroconf: update to version 0.29.0

Update copyright in Makefile

Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
(cherry picked from commit 757b0ea64710c692579ca59b4afbd49d4c025728)

ksmbd: update to 3.3.8

Major changes are:
  clean-up codes using checkpatch --strict option.
  fix several warning and build failure from linux-next.
  change the minimum supported kernel version to v5.4.
  use xarray for tree connect list.
  fix reviews from lkml.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
(cherry picked from commit fa6f182a21c597cd792bfe83fc68c9c5d0b196b3)

ksmbd-tools: update to 3.3.8

Major changes are:
  disable symlink by default.
  remove smack inherit leftovers.
  Enable guest access on IPC$ share by default.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
(cherry picked from commit c6fa2d5bfaf24f347efd7156b2ad5b1cf62bd9a9)

ksmbd-tools: Add a mDNS TXT record for the ksmbd service

MacOS ignores Bonjour services for which TXT records are not returned. This changes forces umdns service to return a TXT record (`daemon=ksmbd`) for the ksmbd service. The exact content is unimportant and to the best of my knowledge nothing reads the `daemon` tag.

Symptoms of the problem (which are also debugging steps):
* Finder refuses to open the OpenWRT "computer" in the Network list.
* Discovery.app (Bonjour Browser) lists the _ssh._tcp service, but the submenu for it doesn't unfold and no address is shown.
* `dns-sd -L OpenWrt _smb._tcp` doesn't return any address.

Signed-off-by: Kirill Nikolaev <cyril7@gmail.com>
(cherry picked from commit 272b0a5c1873a34f6609e7af38395cea3f02bda5)

xinetd: honor ${IPKG_INSTROOT} when sourcing /lib/functions.sh

Avoid "file not found"-error when embedding via Imagebuilder.

Signed-off-by: Sven Roederer <devel-sven@geroedel.de>
(cherry picked from commit bdab7e6bfed9d29f51589ed4461dd927dc78eaf1)

strongswan: bump to 5.9.2

Retire weak algorithms like MD5 and 3DES.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
(cherry picked from commit ae3d5aa73ee2bb608a97ce55742489780f07b779)

strongswan: force PIC on all builds

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
(cherry picked from commit a72780a9c25eeff46319d6be1bc33e515deb703c)

strongswan: migrate to swanctl configs

Derived from the ipsec initd script, with the following changes:

(1) various code improvements, corrections (get rid of left/right
    updown scripts, since there's only one), etc;
(2) add reauth and fragmentation parameters;
(3) add x.509 certificate-based authentication;

and other minor changes.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
(cherry picked from commit f9d91f1f470aaa6d3da5aab97bf5ece139d8c5bd)

strongswan: remove synthesized ipsec conf files

If you shutdown ipsec service, and it doesn't clean up
/var/ipsec/ipsec.conf, then when you start swanctl service it
might see an incompatible file on startup.  Remedy is to
remove unneeded files when shutting down the service.  They
can always be regenerated when the service starts again.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
(cherry picked from commit baa38a14200d0549a0531be92f3ef89e526063ac)

strongswan: move ipsec conf files to subpackage

These config files are only used by the ipsec interface to charon,
and shouldn't be part of the base package.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
(cherry picked from commit e626255b371b8bd7811ea870525b32c0a4b2f589)

strongswan: make the include's in the .conf files persistent

Having scripts diddle user written config files seems potentially
dangerous.  Plus there's really no downside to including some
empty files.  Best to just make the includes be permanent.

Additional feature suggested by Luiz: if a -opkg version of the
config file was created unnecessarily, remove it as part of the
upgrade process since changes won't be happening to that file
as an artifact of the service starting.  The include lines are
now permanent, which means that (1) additional configuration
synthesized by UCI won't be anywhere that opkg (or sysupgrade,
for that matter) cares about since it won't be persistent, and
(2) if changes are being made, then they're being done by a
person with an editor and they really should be distinguished.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
(cherry picked from commit 643df01275798dc4a44d33ac1a8b630c91a80c8c)

strongswan: change maintainers

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
(cherry picked from commit 0bd4410e304f6164a1e0766815a1ca080dbeaa17)

strongswan: fix local_gateway discovery

This has been observed by myself and @luizluca: ip route get is
appending uid0 to the output, as seen from:

root@OpenWrt2:~# ip route get 1.1.1.1
1.1.1.1 via 174.27.160.1 dev eth3 src 174.27.182.184 uid 0
    cache
root@OpenWrt2:~#

so the fix is an anchored match, discarding all else. Also, using
ip -o means never having to do multiline matches...

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
(cherry picked from commit ec72d3a9e47954f0be844fb32abb5ca1e4dda667)

mtd-rw: fix build failure with kernel 5.10

When building mtd-rw for a target based on Kernel 5.10 which has
CONFIG_MTD disabled the build fails with

ERROR: "put_mtd_device" [../mtd-rw.ko] undefined!
ERROR: "get_mtd_device" [../mtd-rw.ko] undefined!

Omit building the package for such a target.

Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit c6b3d949295e687c54a6d87f60f49f7ccc4bdcdf)

clamav: update to 0.103.1

Convert to using CMake in order to speed up compilation and to fix
compilation under glibc.

Add extra dependencies since they're now needed.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
(cherry picked from commit 7cd687cb7ea576dda2a54114eb4f90838aa13580)

python3-libsemanage: update to 3.2

Signed-off-by: Rosen Penev <rosenp@gmail.com>
(cherry picked from commit acb72e74529a5f3c6ec067cfe6047b621407c29a)

setools: update to 4.4.0

Remove no longer needed patches.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
(cherry picked from commit 39bce0e7191bab285d3c0fb6b205df7bcfd36e4f)

jool: Update to 4.1.5

Compile and run tested on: mvebu (Turris Omnia)

Signed-off-by: Ondřej Caletka <ondrej@caletka.cz>
(cherry picked from commit 0c044284b7882c71642af38077a92f99277564e9)

nut: fix typo in nutshutdown script

Even it's only cosmetic and should not affect the function of regular system,
fix the name of the IPKG_INSTROOT variable.
Typo was added long ago with 8400c9a6ec799.

Signed-off-by: Sven Roederer <devel-sven@geroedel.de>
(cherry picked from commit f25f49a8b7c5a038f8a50dbb74e10db19f26d15a)

mosquitto: bump to 2.0.10

This is a security fix, affecting 2.0.0 through to 2.0.9.  Mosquitto instances
could be remotely DoS'd by authenticated clients.

Release notes at: https://github.com/eclipse/mosquitto/blob/v2.0.10/ChangeLog.txt
CVE number has not yet been assigned.

Signed-off-by: Karl Palsson <karlp@etactica.com>

haproxy: Update HAProxy to v2.2.13

- Update haproxy download URL and hash

Signed-off-by: Christian Lachner <gladiac@gmail.com>

cache-domains: Fixed host files directory
* Hid unnecessary output

Signed-off-by: Gerard Ryan <G.M0N3Y.2503@gmail.com>

Merge pull request #15331 from 1715173329/xray-2102

[openwrt-21.02] xray-core: Update to 1.4.2

banip: bugfix 0.7.6-2

* fix housekeeping of external list sources

Signed-off-by: Dirk Brenken <dev@brenken.org>
(cherry picked from commit 86a20c79556284807f95aafd4f9db9633fafe5b7)

xray-core: Update to 1.4.2

Updated geo datas to latest version.

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
(backported from 781c70077bf5dfd1c372c3a7a6955eadb3e380a2)

xray-core: init: add browser dialer support

Since v1.4.1, Xray has introduced a new feature to transfer data via
browsers, which can disguise itself as a normal browser to cheat
network censorship.

For more details, see https://github.com/XTLS/Xray-core/pull/421.

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
(backported from 736667ce6eab44e265744337559c155aa99cbc00)

simple-adblock: jsonOps-related bugfixes

Signed-off-by: Stan Grishin <stangri@melmac.net>

xray-core: Update to 1.4.1

Updated geodata to latest version.

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
(backported from ee9868cb20f78b01df1996090f1fe224a5e4c017)

yq: Update to 4.6.3

- Re-assigned myself as the maintainer
- Used $(AUTORELEASE) for PKG_RELEASE

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
(backported from 82ebe3e49a50075116da4b677eacae91e6fcd2c4)

python3-pyroute2: update to version 0.5.16

Signed-off-by: Martin Matějek <martin.matejek@gmx.com>
(cherry picked from commit df4b1ae24e5532e8d3c634d8ae82f87c8f6ea8e0)

banip: update to 0.7.6

* rework the central iptables function to significantly
  reduce the code complexity and the overall number of iptables calls
* check early and only once in the chain for ctstate NEW and
  return otherwise (thanks @ldir-EDB0)
* made the whitelist ordering within the chain more flexible

Signed-off-by: Dirk Brenken <dev@brenken.org>
(cherry picked from commit 1235acdde621d5ba5dd85d3e232db1162f1f086f)

hwdata: update to version 0.345

Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
(cherry picked from commit 5e30a07908e195d8bf3966532b3466da519a25b1)

python-zipp: update to version 3.4.1

Signed-off-by: Jan Pavlinec <jan.pavlinec@nic.cz>
(cherry picked from commit 7f850739791257905cd6e3ec36dba18713f0af55)

subversion: update to 1.14.1

Fixes CVE-2020-17525

Signed-off-by: Jan Pavlinec <jan.pavlinec@nic.cz>
(cherry picked from commit 0dd5354abce28eed9e4944f61b80c441c18956a1)

zstd: update to version 1.4.9

Fixes CVE-2021-24032

Signed-off-by: Jan Pavlinec <jan.pavlinec@nic.cz>
(cherry picked from commit ebc4939dd235f3cdc8a69182426bd94cfece4cf0)

git: update to version 2.30.2

Fixes CVE-2021-21300

Signed-off-by: Jan Pavlinec <jan.pavlinec@nic.cz>
(cherry picked from commit a4f058ec5cad69c981ca47d2f922a4abf22d5319)

CI: use new `openwrt` Docker username

We now own `openwrtorg` and `openwrt`, where the latter replaces the
former. Slowly migrate over.

Signed-off-by: Paul Spooren <mail@aparcar.org>
(cherry picked from commit b164a3aa32caa181feff8074ecce3a42b052b060)

reptyr: add mips64el to the DEPENDS list

MIPS is completely unsupported.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
(cherry picked from commit 03515d00cdaa6a9d91d8c003fc27a1e59258d8fa)

bind: update to 9.17.11

Backport upstream OpenSSL deprecated API patch.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
(cherry picked from commit dd64cb713bc3d08b94b544d95dd22151f0e71394)

netdata: update to version 1.29.3

Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
(cherry picked from commit 5074fbbfdc8536daf1d979f7ead32cebb1ec2acb)

sshpass: update to version 1.09

Changelog [1]:
Version 1.09
* Explicitly set the controlling TTY

Version 1.08
* Report when IP key has changed
* Scrub the environment variable for -e

Version 1.07
* Pass signals that should terminate to ssh
* Fix race around signal handling
* Report IPC errors to stderr
* Report if can't open -f password file

[1] https://sourceforge.net/p/sshpass/code/76/tree/trunk/ChangeLog

Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
(cherry picked from commit 5799d0b1eea5e2cf90c05eab7729112288874470)

nnn: update to version 3.6

Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
(cherry picked from commit ad116f29ceb1470e38bece6b5a71b737f976939b)

syslog-ng: update to version 3.31.2

Bump config file

Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
(cherry picked from commit 3d817e968e8d9289255f1eea293363835f6e74a7)

gitlab-runner: update to version 13.10.0

Signed-off-by: Jan Pavlinec <jan.pavlinec@nic.cz>
(cherry picked from commit d7e2b608e617b6558f4373e76840f940043535d5)

gitlab-runner: update to 13.9.0

Remove no MIPS depends as it supports MIPS now.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
(cherry picked from commit 1329b9fe2e0bdb19b0850dbaae71e374f42ae751)

gnutls: update to version 3.7.1

Fixes
CVE-2021-20231
CVE-2021-20232

Signed-off-by: Jan Pavlinec <jan.pavlinec@nic.cz>
(cherry picked from commit 323461a1f018a1613537742779da8ee2a892f0af)

libmariadb: add dependency on libcurl

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
(cherry picked from commit 5b2d35a8d005faa5c2ea6fd457fcb57141463eeb)

libqmi: bump to 1.28.2

Signed-off-by: Nicholas Smith <nicholas@nbembedded.com>
(cherry picked from commit 570ff69ec63c737cd0f6049e476042df423fa65e)

libqrtr-glib: add libqrtr-glib

Signed-off-by: Nicholas Smith <nicholas@nbembedded.com>
(cherry picked from commit cfe24305de3d00916fd7deac8a93fb719cdd4df4)

libqmi: bump to 1.28.0

Signed-off-by: Nicholas Smith <nicholas@nbembedded.com>
(cherry picked from commit c9709a3c82b963e2b882b3a0c2c44bd7e9f8ae23)

modemmanager: bump to 1.16.2

Signed-off-by: Nicholas Smith <nicholas@nbembedded.com>
(cherry picked from commit 02d8bbcfe0a76a375657ce4042586d09c94ea03a)

modemmanager: bump to version 1.16.0

Signed-off-by: Nicholas Smith <nicholas@nbembedded.com>
(cherry picked from commit 54a9b58ffd549bc271881a81a773be4e5c1a62d5)

banip: update to 0.7.5-4

* fix another IPv4/IPv6 related iptables chain creation problem
* fix counter during ipset creation
* fix regex for debug counters
* fix ipset housekeeping for local sources

Signed-off-by: Dirk Brenken <dev@brenken.org>
(cherry picked from commit fb4bfd259df3e06499e2c8b7c9197755bd39ab72)

https-dns-proxy: bugfix: correct PROCD firewall object

Signed-off-by: Stan Grishin <stangri@melmac.net>

adblock: update 4.1.0-3

* add a restrictive "jail mode only" variant, just point your
  jail directory to your primary dns directory
* update readme

Signed-off-by: Dirk Brenken <dev@brenken.org>
(cherry picked from commit df9ee1388e59b964dfafd28310c59f62c9071932)

Merge pull request #15220 from stangri/21.02-https-dns-proxy

[21.02] https-dns-proxy: support for additional Force DNS ports

Merge pull request #15227 from cotequeiroz/pic_quote-21.02

[21.02] Cherry-picks from PRs dealing with $(FPIC) quoting

nss: fix compilation with QUILT

Commit 657574f45 disabled building the host nsinstall program when using
QUILT.  However, the host nsinstall is needed to compile the package,
breaking compilation with QUILT.

Move the native compile to Build/Configure, which will not be called for
prepare, refresh, or update targets, but will be called before
Build/Compile.

nss does not have a configure script, so Build/Configure/Default is not
being called.

Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
(cherry picked from commit fbed6751b044d3c644065cdca37bd37cbb854723)

nss: quote $(FPIC), as it may have multiple flags

FPIC may be defined with more than one flag.  In that case, it becomes
necessary to use it inside QUOTES in a shell context.

Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
(cherry picked from commit c5f91a2a56d9087adbc084d51aa3dae8165970f3)

treewide: fix places where $(FPIC) is unquoted

Fixes part of issue #14921.

When $(FPIC) gets added to TARGET_CFLAGS (for instance), we can
count on $(TARGET_CFLAGS) in turn being quoted when it gets
expanded.  But there are a few places where $(FPIC) gets
expanded directly into environment variables passed on the
command line, such as when setting lt_cv_* variables as in this
case.

It's wrong to assume that the expansion of $(FPIC) won't require
quoting (such as it containing spaces) if it has multiple compiler
flags.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
(cherry picked from commit 0d5c6769f15f15ce950d2b41dce3341b5c160c36)

Merge pull request #15158 from TDT-AG/pr/20210218-openwrt-21.02-watchcat

watchcat: update to support procd

https-dns-proxy: support for additional Force DNS ports

Signed-off-by: Stan Grishin <stangri@melmac.net>

tinc: new maintainer

Signed-off-by: Erwan MAS <erwan@mas.nom.fr>