drm: dw-hdmi-i2s: enable audio clock in audio_startup

In the designware databook, the sequence of enabling audio clock and
setting format is not clearly specified.
Currently, audio clock is enabled in the end of hw_param ops after
setting format.

On some monitors, there is a possibility that audio does not come out.
Fix this by enabling audio clock in audio_startup ops
before hw_param ops setting format.

Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190902035435.44463-1-cychiang@chromium.org

drm: mst: Fix query_payload ack reply struct

Spec says[1] Allocated_PBN is 16 bits

[1]- DisplayPort 1.2 Spec, Section 2.11.9.8, Table 2-98

Fixes: ad7f8a1f9ced ("drm/helper: add Displayport multi-stream helper (v0.6)")
Cc: Lyude Paul <lyude@redhat.com>
Cc: Todd Previte <tprevite@gmail.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190829165223.129662-1-sean@poorly.run

drm/ingenic: Hardcode panel type to DPI

The ingenic driver supports DPI panels only at the moment, so hardcode
their type to DPI instead of Unknown.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823212353.29369-1-laurent.pinchart@ideasonboard.com
# *** extracted tags ***
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>

drm/msm: Use drm_attach_bridge() to attach a bridge to an encoder

This is part of our attempt to make the bridge chain a double-linked
list based on the generic list helpers. In order to do that, we must
patch all drivers manipulating the encoder->bridge field directly.

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20190826152649.13820-9-boris.brezillon@collabora.com

drm: Stop including drm_bridge.h from drm_crtc.h

We are about to add a drm_bridge_state that inherits from
drm_private_state which is defined in drm_atomic.h. Problem is,
drm_atomic.h includes drm_crtc.h which in turn includes drm_bridge.h,
leading to "drm_private_state has incomplete type" error.

Let's force all users of the drm_bridge API to explicitly include
drm_bridge.h.

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190826152649.13820-2-boris.brezillon@collabora.com

drm/meson: add resume/suspend hooks

Add the suspend and resume hooks to:
- save and disable the entire DRM driver on suspend
- re-init the entire VPU subsystem on resume, to recover CRTC and pixel
generator functionnal usage after DDR suspend, then recover DRM driver
state

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190827095825.21015-3-narmstrong@baylibre.com

drm/meson: dw_hdmi: add resume/suspend hooks

Add the suspend and resume hooks to:
- reset the whole HDMI glue and HDMI controller on suspend
- re-init the HDMI glue and HDMI controller on resume

The HDMI glue init is refactored to be re-used from the resume hook.

It makes usage of dw_hdmi_resume() to recover a functionnal DDC bus.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Kevin Hilman <khilman@baylibre.com>
[narmstrong: fixed typo in commit log, and rebased on drm-misc-next]
Link: https://patchwork.freedesktop.org/patch/msgid/20190827095825.21015-2-narmstrong@baylibre.com

drm/virtio: module_param_named() requires linux/moduleparam.h

Fixes: 3e93bc2a58aa ("drm/virtio: make resource id workaround runtime switchable.")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: http://patchwork.freedesktop.org/patch/msgid/20190828185516.22b03da8@canb.auug.org.au
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/virtio: notify virtqueues without holding spinlock

Split virtqueue_kick() call into virtqueue_kick_prepare(), which
requires serialization, and virtqueue_notify(), which does not.  Move
the virtqueue_notify() call out of the critical section protected by the
queue lock.  This avoids triggering a vmexit while holding the lock and
thereby fixes a rather bad spinlock contention.

Suggested-by: Chia-I Wu <olvaffe@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190813082509.29324-3-kraxel@redhat.com

drm/virtio: cleanup queue functions

Make the queue functions return void, none of
the call sites checks the return value.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190813082509.29324-2-kraxel@redhat.com

drm/virtio: add plane check

Use drm_atomic_helper_check_plane_state()
to sanity check the plane state.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190822094657.27483-1-kraxel@redhat.com

drm/vc4/vc4_hdmi: fill in connector info

Fill in the connector info, allowing userspace to associate
the CEC device with the drm connector.

Tested on a Raspberry Pi 3B.

Signed-off-by: Dariusz Marcinkiewicz <darekm@google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823112427.42394-2-hverkuil-cisco@xs4all.nl

drm/i915/intel_hdmi: use cec_notifier_conn_(un)register

Use the new cec_notifier_conn_(un)register() functions to
(un)register the notifier for the HDMI connector, and fill in
the cec_connector_info.

Signed-off-by: Dariusz Marcinkiewicz <darekm@google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20190814104520.6001-3-darekm@google.com

drm_dp_cec: add connector info support.

Pass the connector info to the CEC adapter. This makes it possible
to associate the CEC adapter with the corresponding drm connector.

Signed-off-by: Dariusz Marcinkiewicz <darekm@google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20190814104520.6001-2-darekm@google.com

drm/virtio: make resource id workaround runtime switchable.

Also update the comment with a reference to the virglrenderer fix.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190822102614.18164-1-kraxel@redhat.com

drm/mcde: Fix an error handling path in 'mcde_probe()'

If we don't find any matching components, we should go through the error
handling path, in order to free some resources.

Fixes: ca5be902a87d ("drm/mcde: Fix uninitialized variable")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190822211518.5578-1-christophe.jaillet@wanadoo.fr

drm/mipi-dbi: fix a loop in debugfs code

This code will likely crash if we try to do a zero byte write.  The code
looks like this:

        /* strip trailing whitespace */
        for (i = count - 1; i > 0; i--)
                if (isspace(buf[i]))
...

We're writing zero bytes so count = 0.  You would think that "count - 1"
would be negative one, but because "i" is unsigned it is a large
positive numer instead.  The "i > 0" condition is true and the "buf[i]"
access will be out of bounds.

The fix is to make "i" signed and now everything works as expected.  The
upper bound of "count" is capped in __kernel_write() at MAX_RW_COUNT so
we don't have to worry about it being higher than INT_MAX.

Fixes: 02dd95fe3169 ("drm/tinydrm: Add MIPI DBI support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
[noralf: Adjust title]
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190821072456.GJ26957@mwanda

drm/panel: Initialise panel dev and funcs through drm_panel_init()

Instead of requiring all drivers to set the dev and funcs fields of
drm_panel manually after calling drm_panel_init(), pass the data as
arguments to the function. This simplifies the panel drivers, and will
help future refactoring when adding new arguments to drm_panel_init().

The panel drivers have been updated with the following Coccinelle
semantic patch, with manual inspection to verify that no call to
drm_panel_init() with a single argument still exists.

@@
expression panel;
expression device;
identifier ops;
@@
 drm_panel_init(&panel
+ , device, &ops
 );
 ...
(
-panel.dev = device;
-panel.funcs = &ops;
|
-panel.funcs = &ops;
-panel.dev = device;
)

Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823193245.23876-3-laurent.pinchart@ideasonboard.com

drm/panel: Add missing drm_panel_init() in panel drivers

Panels must be initialised with drm_panel_init(). Add the missing
function call in the panel-raspberrypi-touchscreen.c and
panel-sitronix-st7789v.c drivers.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823193245.23876-2-laurent.pinchart@ideasonboard.com

drm/panfrost: Add errata descriptions from kbase

While newer kbase include only the numbers of errata, older kbase
releases included one-line descriptions for each errata, which is useful
for those working on the driver. Import these descriptions. Most are
from kbase verbatim; a few I edited for clarity.

v2: Wrote a description for the workaround of an issue whose cause is
still unknown (Stephen). Errata which pertain to newer models
unsupported by the mainline driver, for which Arm has not yet released
errata information, have been removed from the issue list as the kernel
need not concern itself with these.

v3: Readded errata not yet handled, adding descriptions based on the
workarounds in the latest kbase release.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823155149.7272-1-alyssa.rosenzweig@collabora.com

drm/panfrost: Use mutex_trylock in panfrost_gem_purge

Lockdep reports a circular locking dependency with pages_lock taken in
the shrinker callback. The deadlock can't actually happen with current
users at least as a BO will never be purgeable when pages_lock is held.
To be safe, let's use mutex_trylock() instead and bail if a BO is locked
already.

Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Steven Price <steven.price@arm.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823021216.5862-7-robh@kernel.org

drm/shmem: Use mutex_trylock in drm_gem_shmem_purge

Lockdep reports a circular locking dependency with pages_lock taken in
the shrinker callback. The deadlock can't actually happen with current
users at least as a BO will never be purgeable when pages_lock is held.
To be safe, let's use mutex_trylock() instead and bail if a BO is locked
already.

WARNING: possible circular locking dependency detected
5.3.0-rc1+ #100 Tainted: G             L
------------------------------------------------------
kswapd0/171 is trying to acquire lock:
000000009b9823fd (&shmem->pages_lock){+.+.}, at: drm_gem_shmem_purge+0x20/0x40

but task is already holding lock:
00000000f82369b6 (fs_reclaim){+.+.}, at: __fs_reclaim_acquire+0x0/0x40

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (fs_reclaim){+.+.}:
       fs_reclaim_acquire.part.18+0x34/0x40
       fs_reclaim_acquire+0x20/0x28
       __kmalloc_node+0x6c/0x4c0
       kvmalloc_node+0x38/0xa8
       drm_gem_get_pages+0x80/0x1d0
       drm_gem_shmem_get_pages+0x58/0xa0
       drm_gem_shmem_get_pages_sgt+0x48/0xd0
       panfrost_mmu_map+0x38/0xf8 [panfrost]
       panfrost_gem_open+0xc0/0xe8 [panfrost]
       drm_gem_handle_create_tail+0xe8/0x198
       drm_gem_handle_create+0x3c/0x50
       panfrost_gem_create_with_handle+0x70/0xa0 [panfrost]
       panfrost_ioctl_create_bo+0x48/0x80 [panfrost]
       drm_ioctl_kernel+0xb8/0x110
       drm_ioctl+0x244/0x3f0
       do_vfs_ioctl+0xbc/0x910
       ksys_ioctl+0x78/0xa8
       __arm64_sys_ioctl+0x1c/0x28
       el0_svc_common.constprop.0+0x90/0x168
       el0_svc_handler+0x28/0x78
       el0_svc+0x8/0xc

-> #0 (&shmem->pages_lock){+.+.}:
       __lock_acquire+0xa2c/0x1d70
       lock_acquire+0xdc/0x228
       __mutex_lock+0x8c/0x800
       mutex_lock_nested+0x1c/0x28
       drm_gem_shmem_purge+0x20/0x40
       panfrost_gem_shrinker_scan+0xc0/0x180 [panfrost]
       do_shrink_slab+0x208/0x500
       shrink_slab+0x10c/0x2c0
       shrink_node+0x28c/0x4d8
       balance_pgdat+0x2c8/0x570
       kswapd+0x22c/0x638
       kthread+0x128/0x130
       ret_from_fork+0x10/0x18

other info that might help us debug this:

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(fs_reclaim);
                               lock(&shmem->pages_lock);
                               lock(fs_reclaim);
  lock(&shmem->pages_lock);

 *** DEADLOCK ***

3 locks held by kswapd0/171:
 #0: 00000000f82369b6 (fs_reclaim){+.+.}, at: __fs_reclaim_acquire+0x0/0x40
 #1: 00000000ceb37808 (shrinker_rwsem){++++}, at: shrink_slab+0xbc/0x2c0
 #2: 00000000f31efa81 (&pfdev->shrinker_lock){+.+.}, at: panfrost_gem_shrinker_scan+0x34/0x180 [panfrost]

Fixes: 17acb9f35ed7 ("drm/shmem: Add madvise state and purge helpers")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Steven Price <steven.price@arm.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823021216.5862-6-robh@kernel.org

drm/shmem: Do dma_unmap_sg before purging pages

Calling dma_unmap_sg() in drm_gem_shmem_free_object() is too late if the
backing pages have already been released by the shrinker. The result is
the following abort:

Unable to handle kernel paging request at virtual address ffff8000098ed000
Mem abort info:
  ESR = 0x96000147
  Exception class = DABT (current EL), IL = 32 bits
  SET = 0, FnV = 0
  EA = 0, S1PTW = 0
Data abort info:
  ISV = 0, ISS = 0x00000147
  CM = 1, WnR = 1
swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000002f51000
[ffff8000098ed000] pgd=00000000401f8003, pud=00000000401f7003, pmd=00000000401b1003, pte=00e80000098ed712
Internal error: Oops: 96000147 [#1] SMP
Modules linked in: panfrost gpu_sched
CPU: 5 PID: 902 Comm: gnome-shell Not tainted 5.3.0-rc1+ #95
Hardware name: 96boards Rock960 (DT)
pstate: 40000005 (nZcv daif -PAN -UAO)
pc : __dma_inv_area+0x40/0x58
lr : arch_sync_dma_for_cpu+0x28/0x30
sp : ffff00001321ba30
x29: ffff00001321ba30 x28: ffff00001321bd08
x27: 0000000000000000 x26: 0000000000000009
x25: 0000ffffc1f86170 x24: 0000000000000000
x23: 0000000000000000 x22: 0000000000000000
x21: 0000000000021000 x20: ffff80003bb2d810
x19: 00000000098ed000 x18: 0000000000000000
x17: 0000000000000000 x16: ffff800023fd9480
x15: 0000000000000000 x14: 0000000000000000
x13: 0000000000000000 x12: 0000000000000000
x11: 00000000fffb9fff x10: 0000000000000000
x9 : 0000000000000000 x8 : ffff800023fd9c18
x7 : 0000000000000000 x6 : 00000000ffffffff
x5 : 0000000000000000 x4 : 0000000000021000
Purging 5693440 bytes
x3 : 000000000000003f x2 : 0000000000000040
x1 : ffff80000990e000 x0 : ffff8000098ed000
Call trace:
 __dma_inv_area+0x40/0x58
 dma_direct_sync_single_for_cpu+0x7c/0x80
 dma_direct_unmap_page+0x80/0x88
 dma_direct_unmap_sg+0x54/0x80
 drm_gem_shmem_free_object+0xfc/0x108
 panfrost_gem_free_object+0x118/0x128 [panfrost]
 drm_gem_object_free+0x18/0x90
 drm_gem_object_put_unlocked+0x58/0x80
 drm_gem_object_handle_put_unlocked+0x64/0xb0
 drm_gem_object_release_handle+0x70/0x98
 drm_gem_handle_delete+0x64/0xb0
 drm_gem_close_ioctl+0x28/0x38
 drm_ioctl_kernel+0xb8/0x110
 drm_ioctl+0x244/0x3f0
 do_vfs_ioctl+0xbc/0x910
 ksys_ioctl+0x78/0xa8
 __arm64_sys_ioctl+0x1c/0x28
 el0_svc_common.constprop.0+0x88/0x150
 el0_svc_handler+0x28/0x78
 el0_svc+0x8/0xc
 Code: 8a230000 54000060 d50b7e20 14000002 (d5087620)

Fixes: 17acb9f35ed7 ("drm/shmem: Add madvise state and purge helpers")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823021216.5862-5-robh@kernel.org

drm/panfrost: Fix possible suspend in panfrost_remove

Calls to panfrost_device_fini() access the h/w, but we already done a
pm_runtime_put_sync_autosuspend() beforehand. This only works if the
autosuspend delay is long enough. A 0ms delay will hang the system when
removing the device. Fix this by moving the pm_runtime_put_sync_suspend()
after the panfrost_device_fini() call.

Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Steven Price <steven.price@arm.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823021216.5862-2-robh@kernel.org

MAINTAINERS: Add Steven and Alyssa as panfrost reviewers

Add Steven Price and Alyssa Rosenzweig as reviewers as they have been the
primary reviewers already.

Cc: Steven Price <steven.price@arm.com>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Steven Price <steven.price@arm.com>
Acked-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823013357.932-1-robh@kernel.org

drm/panfrost: Add missing check for pfdev->regulator

When modifying panfrost_devfreq_target() to support a device without a
regulator defined I missed the check on the error path. Let's add it.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: e21dd290881b ("drm/panfrost: Enable devfreq to work without regulator")
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190822093218.26014-1-steven.price@arm.com

drm/i915: switch to drm_fb_helper_remove_conflicting_pci_framebuffers

No need for a home-grown version, the generic helper should work just
fine.  It also handles vgacon removal these days, see commit
1c74ca7a1a9a ("drm/fb-helper: call vga_remove_vgacon automatically."),
so that can be removed too.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20190822090645.25410-4-kraxel@redhat.com

drm: drop resource_id parameter from drm_fb_helper_remove_conflicting_pci_framebuffers

Not needed any more for remove_conflicting_pci_framebuffers calls.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20190822090645.25410-3-kraxel@redhat.com

fbdev: drop res_id parameter from remove_conflicting_pci_framebuffers

Since commit b0e999c95581 ("fbdev: list all pci memory bars as
conflicting apertures") the parameter was used for some sanity checks
only, to make sure we detect any issues with the new approach to just
list all memory bars as apertures.

No issues turned up so far, so continue to cleanup:  Drop the res_id
parameter, drop the sanity checks.  Also downgrade the logging from
"info" level to "debug" level and update documentation.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20190822090645.25410-2-kraxel@redhat.com

omapdrm: no need to check return value of debugfs_create functions

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Sebastian Reichel <sebastian.reichel@collabora.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: zhong jiang <zhongjiang@huawei.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613115749.GC26335@kroah.com
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190704023557.4551-1-huangfq.daxian@gmail.com

drm/omap: Add 'alpha' and 'pixel blend mode' plane properties

Add the following properties for planes:
* alpha
* pixel blend mode. Only "Pre-multiplied" and "Coverage" are supported

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190711135219.23402-1-jjhiblot@ti.com

drm/panfrost: Fix sleeping while atomic in panfrost_gem_open

We can't hold the mm_lock spinlock as panfrost_mmu_map() can sleep:

BUG: sleeping function called from invalid context at kernel/locking/mutex.c:909
in_atomic(): 1, irqs_disabled(): 0, pid: 974, name: glmark2-es2-drm
1 lock held by glmark2-es2-drm/974:
CPU: 5 PID: 974 Comm: glmark2-es2-drm Tainted: G        W    L    5.3.0-rc1+ #94
Hardware name: 96boards Rock960 (DT)
Call trace:
 dump_backtrace+0x0/0x130
 show_stack+0x14/0x20
 dump_stack+0xc4/0x10c
 ___might_sleep+0x158/0x228
 __might_sleep+0x50/0x88
 __mutex_lock+0x58/0x800
 mutex_lock_interruptible_nested+0x1c/0x28
 drm_gem_shmem_get_pages+0x24/0xa0
 drm_gem_shmem_get_pages_sgt+0x48/0xd0
 panfrost_mmu_map+0x38/0xf8 [panfrost]
 panfrost_gem_open+0xc0/0xd8 [panfrost]
 drm_gem_handle_create_tail+0xe8/0x198
 drm_gem_handle_create+0x3c/0x50
 panfrost_gem_create_with_handle+0x70/0xa0 [panfrost]
 panfrost_ioctl_create_bo+0x48/0x80 [panfrost]
 drm_ioctl_kernel+0xb8/0x110
 drm_ioctl+0x244/0x3f0
 do_vfs_ioctl+0xbc/0x910
 ksys_ioctl+0x78/0xa8
 __arm64_sys_ioctl+0x1c/0x28
 el0_svc_common.constprop.0+0x90/0x168
 el0_svc_handler+0x28/0x78
 el0_svc+0x8/0xc

Fixes: a5efb4c9a562 ("drm/panfrost: Restructure the GEM object creation")
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190819161204.3106-5-robh@kernel.org

drm: meson: use match data to detect vpu compatibility

This patch introduce new enum which contains all VPU family (GXBB,
GXL, GXM and G12A).
This enum is used to detect the VPU compatible with the device.

We only need to set .data to the corresponding enum in the device
table, no need to check .compatible string anymore.

Signed-off-by: Julien Masson <jmasson@baylibre.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87imqpz21w.fsf@masson.i-did-not-set--mail-host-address--so-tickle-me

drm: fix module name in edid_firmware log message

The module is drm_kms_helper, not drm_kms_firmware.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204549
Reported-by: Göran Uddeborg <goeran@uddeborg.se>
Fixes: ac6c35a4d8c7 ("drm: add backwards compatibility support for drm_kms_helper.edid_firmware")
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190821094312.5514-1-jani.nikula@intel.com

drm: kirin: Move ade drm init to kirin drm drv

As part of refactoring the kirin driver to better support
different hardware revisions, this patch renames ade_data to
kirin_drm_private, and moves crtc_init and plane_init to
kirin drm drv too. Now that they are generic the functions
can be shared between the kirin620 and (to be added later)
kirin960 specific support code.

Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
[jstultz: Reworded commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-26-john.stultz@linaro.org

drm: kirin: Pass driver data to crtc init and plane init

As part of refactoring the kirin driver to better support
different hardware revisions, this patch changes the code
via a passed in driver_data pointer, rather than hardcoding
them via ade_driver_data variable.

This will allow those funcitons to be later moved to the
generic kirin_drm_drv.c using alternative driver_data structures
that support other hardware.

Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
[jstultz: Reworded commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-25-john.stultz@linaro.org

drm: kirin: Add alloc_hw_ctx/clean_hw_ctx ops in driver data

As part of refactoring the kirin driver to better support
different hardware revisions, this patch changes the
alloc/clean_hw_ctx functions to be called via driver_data
specific funciton pointers.

This will allow the ade_drm_init to later be made generic and
moved to kirin_drm_drv.c

Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
[jstultz: Reworded commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-24-john.stultz@linaro.org

drm: kirin: Make driver_data variable non-global

As part of refactoring the kirin driver to better support
different hardware revisions, this patch changes the driver_data
value to not be a global variable. Instead the driver_data value
is accessed via the of_device_get_match_data() when needed.

Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
[jstultz: Reworded commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-23-john.stultz@linaro.org

drm: kirin: Fix dev->driver_data setting

As part of refactoring the kirin driver to better support
different hardware revisions, this patch changes the
dev->driver_data to point to a drm_device, not ade_data.

Thus we set the driver data to drm device after alloc.

Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
[jstultz: Reworded commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-22-john.stultz@linaro.org

drm: kirin: Rename plane_init and crtc_init

As part of refactoring the kirin driver to better support
different hardware revisions, this patch renames
ade_crtc/plane_init kirin_plane/crtc_init, as they will later be
moved to kirin drm drv and shared with the kirin960 hardware
support.

Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
[jstultz: reworded commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-21-john.stultz@linaro.org

drm: kirin: Add register connect helper functions in drm init

As part of refactoring the kirin driver to better support
different hardware revisions, this patch adds a flag to the
device specific driver data so that we can conditionally
register the connectors at init.

Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
[jstultz: reworded commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-20-john.stultz@linaro.org

drm: kirin: Move drm driver to driver data

As part of refactoring the kirin driver to better support
different hardware revisions, this patch moves the drm_driver
structure to be under device specific driver data.

This will allow us to more easily add support for kirin960
hardware with later patches.

Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
[jstultz: Reworded commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-19-john.stultz@linaro.org

drm: kirin: Move config max_width and max_height to driver data

As part of refactoring the kirin driver to better support
different hardware revisions, this patch moves the max_width
and max_height values used in kirin_drm_mode_config_inita to
hardware specific driver data.

This will make it easier to add support for new devices
via a new kirin_drm_data structure.

Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
[jstultz: reworded commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-18-john.stultz@linaro.org

drm: kirin: Move plane number and primay plane in driver data

As part of refactoring the kirin driver to better support
different hardware revisions, this patch moves the number of
planes and the primary plane value to the kirin_drm_data
structure

This will make it easier to add support for new devices
via a new kirin_drm_data structure.

Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-17-john.stultz@linaro.org

drm: kirin: Move mode config function to driver_data

As part of refactoring the kirin driver to better support
different hardware revisions, this patch moves the mode config
initialization values into the kirin_drm_data structure.

This will make it easier to add support for new devices
via a new kirin_drm_data structure.

Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-16-john.stultz@linaro.org

drm: kirin: Move channel formats to driver data

As part of refactoring the kirin driver to better support
different hardware revisions, this patch moves the channel
format arrays into the kirin_drm_data structure.

This will make it easier to add support for new devices
via a new kirin_drm_data structure.

Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
[jstultz: reworded commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-15-john.stultz@linaro.org

drm: kirin: Move ade crtc/plane help functions to driver_data

As part of refactoring the kirin driver to better support
different hardware revisions, this patch moves the crtc
and plane funcs/helper_funcs to the struct kirin_drm_data.

This will make it easier to add support for new devices
via a new kirin_drm_data structure.

Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
[jstultz: reworded commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-14-john.stultz@linaro.org

drm: kirin: Reanme dc_ops to kirin_drm_data

As part of refactoring the kirin driver to better support
different hardware revisions, this patch renames the
struct kirin_dc_ops to struct kirin_drm_data and cleans
up the related variable names.

Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
[jstultz: reworded commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-13-john.stultz@linaro.org

drm: kirin: Move kirin_crtc, kirin_plane, kirin_format to kirin_drm_drv.h

As part of refactoring the kirin driver to better support
different hardware revisions, this patch moves some shared
structures and helpers to the common kirin_drm_drv.h

These structures will later used by both kirin620 and
future kirin960 driver

Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
[jstultz: reworded commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-12-john.stultz@linaro.org

drm: kirin: Move workqueue to ade_hw_ctx structure

The workqueue used to reset the display when we hit an LDI
underflow error is ADE specific, so since this patch series
works to make the kirin_crtc structure more generic, move the
workqueue to the ade_hw_ctx structure instead.

Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-11-john.stultz@linaro.org

drm: kirin: Move request irq handle in ade hw ctx alloc

As part of refactoring the kirin driver to better support
different hardware revisions, this patch modifies the
initialization routines so the devm_request_irq() function
is called as part of the allocation function.

This will be needed in the future when we will have different
allocation functions to allocate hardware specific hw_ctx
structures, which will setup the vblank irq differently.

Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
[jstultz: reworded commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-10-john.stultz@linaro.org

drm: kirin: Dynamically allocate the hw_ctx

As part of refactoring the kirin driver to better support
different hardware revisions, this patch modifies the
initialization function to dynamically allocate the ade_hw_ctx
structure previously kept as part of struct ade_data.

This is done so that later we can have the hw_ctx point to
hardware revision specific ctx structures.

Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
[jstultz: reworded commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-9-john.stultz@linaro.org

drm: kirin: Rename ade_crtc to kirin_crtc

As part of refactoring the kirin driver to better support
different hardware revisions, this patch renames the
struct ade_crtc to kirin_crtc.

The struct kirin_crtc will later used by both kirin620 and
future kirin960 driver, and will be moved to a common
kirin_drm_drv.h in a future patch

Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
[jstultz: reworded commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-8-john.stultz@linaro.org

drm: kirin: Rename ade_plane to kirin_plane

As part of refactoring the kirin driver to better support
different hardware revisions, this patch renames the
struct ade_plane to kirin_plane.

The struct kirin_plane will later used by both kirin620 and
future kirin960 driver, and will be moved to a common
kirin_drm_drv.h in a future patch

Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
[jstultz: reworded commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-7-john.stultz@linaro.org

drm: kirin: Remove out_format from ade_crtc

As part of refactoring the kirin driver to better support
different hardware revisions, this patch removes the out_format
field in the struct ade_crtc, which was only ever set to
LDI_OUT_RGB_888.

Thus this patch removes the field and instead directly uses
LDI_OUT_RGB_888.

Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
[jstultz: reworded commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-6-john.stultz@linaro.org

drm: kirin: Remove uncessary parameter indirection

In a few functions, we pass in a struct ade_crtc, which we only
use to get to the underlying struct ade_hw_ctx.

Thus this patch refactors the functions to just take the
struct ade_hw_ctx directly.

Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Xu YiPing <xuyiping@hisilicon.com>
[jstultz: reworded commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-5-john.stultz@linaro.org

drm: kirin: Remove unreachable return

The 'return 0' in kirin_drm_platform_probe() is unreachable
code, so remove it.

Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Suggested by: Xu YiPing <xuyiping@hisilicon.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-4-john.stultz@linaro.org

drm: kirin: Remove HISI_KIRIN_DW_DSI config option

The CONFIG_HISI_KIRIN_DW_DSI option is only used w/ kirin
driver, so cut out the middleman and condense the config
logic down.

Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-3-john.stultz@linaro.org

drm: kirin: Fix for hikey620 display offset problem

The original HiKey (620) board has had a long running issue
where when using a 1080p montior, the display would occasionally
blink and come come back with a horizontal offset (usually also
shifting the colors, depending on the value of the offset%4).

After lots of analysis by HiSi developers, they found the issue
was due to when running at 1080p, it was possible to hit the
device memory bandwidth limits, which could cause the DSI signal
to get out of sync.

Unfortunately the DSI logic doesn't have the ability to
automatically recover from this situation, but we can get a an
LDI underflow interrupt when it happens.

To then correct the issue, when we get an LDI underflow irq, we
we can simply suspend and resume the display, which resets the
hardware.

Thus, this patch enables the ldi underflow interrupt, and
initializes a workqueue that is used to suspend/resume the
display to recover. Then when the irq occurs we clear it and
schedule the workqueue to reset display engine.

Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Da Lv <lvda3@hisilicon.com>
Signed-off-by: Yidong Lin <linyidong@huawei.com>
[jstultz: Reworded the commit message, checkpatch cleanups]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820230626.23253-2-john.stultz@linaro.org

drm/nouveau: Initialize GEM object before TTM object

TTM assumes that drivers initialize the embedded GEM object before
calling the ttm_bo_init() function. This is not currently the case
in the Nouveau driver. Fix this by splitting up nouveau_bo_new()
into nouveau_bo_alloc() and nouveau_bo_init() so that the GEM can
be initialized before TTM BO initialization when necessary.

Fixes: b96f3e7c8069 ("drm/ttm: use gem vma_node")
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190814093524.GA31345@ulmo

dt-bindings: display: rockchip: update DSI controller

This patch update describe panel/port links, including
unit addresses in documentation of device tree bindings
for the rockchip DSI controller based on the Synopsys
DesignWare MIPI DSI host controller.

Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
[this seems to have gotten lost when the original dsi-series was applied]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20181001123845.11818-5-heiko@sntech.de

dmabuf: Mark up onstack timer for selftests

The dma-fence selftest uses an on-stack timer that requires explicit
annotation for debugobjects.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111442
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820122118.13698-1-chris@chris-wilson.co.uk

drm/komeda: Add support for 'memory-region' DT node property

The 'memory-region' property of the komeda display driver DT binding
allows the use of a 'reserved-memory' node for buffer allocations. Add
the requisite of_reserved_mem_device_{init,release} calls to actually
make use of the memory if present.

Changes since v1:
 - Move handling inside komeda_parse_dt

Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
Signed-off-by: Ayan Kumar Halder <ayan.halder@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Link:- https://patchwork.kernel.org/patch/11076413/

dma-buf: Use %zu for printing sizeof

Use the %zu format specifier for a size_t returned by sizeof.

Reported-by: kbuild-all@01.org
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190819195740.27608-1-chris@chris-wilson.co.uk

dw-hdmi-cec: use cec_notifier_cec_adap_(un)register

Use the new cec_notifier_cec_adap_(un)register() functions to
(un)register the notifier for the CEC adapter.

Also adds CEC_CAP_CONNECTOR_INFO capability to the adapter.

Changes since v3:
- add CEC_CAP_CONNECTOR_INFO to cec_allocate_adapter,
- replace CEC_CAP_LOG_ADDRS | CEC_CAP_TRANSMIT |
CEC_CAP_RC | CEC_CAP_PASSTHROUGH with CEC_CAP_DEFAULTS.

Signed-off-by: Dariusz Marcinkiewicz <darekm@google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190814104520.6001-4-darekm@google.com

drm: dw-hdmi: use cec_notifier_conn_(un)register

Use the new cec_notifier_conn_(un)register() functions to
(un)register the notifier for the HDMI connector, and fill in
the cec_connector_info.

Changes since v6:
        - move cec_notifier_conn_unregister to a bridge detach
  function,
- add a mutex protecting a CEC notifier.
Changes since v4:
- typo fix
Changes since v2:
- removed unnecessary NULL check before a call to
cec_notifier_conn_unregister,
- use cec_notifier_phys_addr_invalidate to invalidate physical
address.
Changes since v1:
Add memory barrier to make sure that the notifier
becomes visible to the irq thread once it is fully
constructed.

Signed-off-by: Dariusz Marcinkiewicz <darekm@google.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190814104520.6001-9-darekm@google.com

drm/i915: Select DMABUF_SELFTESTS for the default i915.ko debug build

Include the DMABUF_SELFTESTS as part of the standard build for IGT, so
that they can be run by igt/dmabuf

Testcase: igt/dmabuf
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tomi Sarvela <tomi.p.sarvela@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190819171900.4501-1-chris@chris-wilson.co.uk

drm/drv: Use // for comments in example code

This improves Sphinx output in two ways:

- It avoids an unmatched single-quote ('), about which Sphinx complained:

    Documentation/gpu/drm-internals.rst:298:
    WARNING: Could not lex literal_block as "c". Highlighting skipped.

  An alternative approach would be to replace "can't" with a word that
  doesn't have a single-quote.

- It lets Sphinx format the comments in italics and grey, making the
  code slightly easier to read.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Acked-by: Daniel Vetter <daniel@ffwll.ch> [via irc]
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190808163629.14280-1-j.neuschaefer@gmx.net

dma-buf: Add selftests for dma-fence

Exercise the dma-fence API exported to drivers.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190819095928.32091-2-chris@chris-wilson.co.uk

dma-buf: Introduce selftesting framework

In light of recent review slip ups, the absence of a suite of tests for
dma-buf became apparent. Given the current plethora of testing
frameworks, opt for one already in use by Intel's CI and so allow easy
hook up into igt.

We introduce a new module that when loaded will execute the list of
selftests and their subtest. The names of the selftests are put into the
modinfo as parameters so that igt can identify each, and run them
independently, principally for ease of error reporting.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Tomi Sarvela <tomi.p.sarvela@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190819095928.32091-1-chris@chris-wilson.co.uk

drm/panfrost: Remove opp table when unloading

The devfreq opp table needs to be removed when unloading the driver to
free the memory associated with it.

Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190816093107.30518-3-steven.price@arm.com

drm/panfrost: Enable devfreq to work without regulator

If there is no regulator defined for the GPU then still control the
frequency using the supplied clock.

Some boards have clock control but no (direct) control of the regulator.
For example the HiKey960 uses a mailbox protocol to a MCU to control
frequencies and doesn't directly control the voltage. This patch allows
frequency control of the GPU on this system.

Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190816093107.30518-1-steven.price@arm.com

drm/panfrost: Implement per FD address spaces

Up until now, a single shared GPU address space was used. This is not
ideal as there's no protection between processes and doesn't work for
supporting the same GPU/CPU VA feature. Most importantly, this will
hopefully mitigate Alyssa's fear of WebGL, whatever that is.

Most of the changes here are moving struct drm_mm and struct
panfrost_mmu objects from the per device struct to the per FD struct.
The critical function is panfrost_mmu_as_get() which handles allocating
and switching the h/w address spaces.

There's 3 states an AS can be in: free, allocated, and in use. When a
job runs, it requests an address space and then marks it not in use when
job is complete(but stays assigned). The first time thru, we find a free
AS in the alloc_mask and assign the AS to the FD. Then the next time
thru, we most likely already have our AS and we just mark it in use with
a ref count. We need a ref count because we have multiple job slots. If
the job/FD doesn't have an AS assigned and there are no free ones, then
we pick an allocated one not in use from our LRU list and switch the AS
from the old FD to the new one.

Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Steven Price <steven.price@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190813150115.30338-1-robh@kernel.org

drm/panfrost: Fix missing unlock on error in panfrost_mmu_map_fault_addr()

Add the missing unlock before return from function panfrost_mmu_map_fault_addr()
in the error handling case.

Fixes: 187d2929206e ("drm/panfrost: Add support for GPU heap allocations")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190814044814.102294-1-weiyongjun1@huawei.com

udlfb: Make dlfb_ops constant

Static structure dlfb_ops, of type fb_ops, is not used except to be
copied into another variable. Hence make dlfb_ops constant to protect it
from unintended modification.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Cc: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190819075236.1051-1-nishkadg.linux@gmail.com

video: fbdev/mmp/core: Use struct_size() in kzalloc()

One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:

struct mmp_path {
...
        struct mmp_overlay overlays[0];
};

size = sizeof(struct mmp_path) + count * sizeof(struct mmp_overlay);
instance = kzalloc(size, GFP_KERNEL)

Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:

instance = kzalloc(struct_size(instance, overlays, count), GFP_KERNEL)

Notice that, in this case, variable size is not necessary, hence it
is removed.

This code was detected with the help of Coccinelle.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190807161312.GA26835@embeddedor

video: fbdev: viafb: Remove dead code

This is dead code since 3.15. If there is no plan to use
it further, this can be removed forever.

Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
[b.zolnierkie: fix patch summary]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1564515200-5020-1-git-send-email-jrdr.linux@gmail.com

video: fbdev: aty[128]fb: Remove dead code

This is dead code since 3.15. If there is no plan to use it
further, this can be removed forever.

Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: "Ville Syrjälä" <syrjala@sci.fi>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
[b.zolnierkie: fix patch summary]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1564514053-4571-1-git-send-email-jrdr.linux@gmail.com

video: fbdev: sh_mobile_lcdcfb: Mark expected switch fall-through

Now that -Wimplicit-fallthrough is passed to GCC by default, the
following warnings shows up:

../drivers/video/fbdev/sh_mobile_lcdcfb.c: In function ‘sh_mobile_lcdc_channel_fb_init’:
../drivers/video/fbdev/sh_mobile_lcdcfb.c:2086:22: warning: this statement may fall
 through [-Wimplicit-fallthrough=]
   info->fix.ypanstep = 2;
   ~~~~~~~~~~~~~~~~~~~^~~
../drivers/video/fbdev/sh_mobile_lcdcfb.c:2087:2: note: here
  case V4L2_PIX_FMT_NV16:
  ^~~~
../drivers/video/fbdev/sh_mobile_lcdcfb.c: In function ‘sh_mobile_lcdc_overlay_fb_init’:
../drivers/video/fbdev/sh_mobile_lcdcfb.c:1596:22: warning: this statement may fall
 through [-Wimplicit-fallthrough=]
   info->fix.ypanstep = 2;
   ~~~~~~~~~~~~~~~~~~~^~~
../drivers/video/fbdev/sh_mobile_lcdcfb.c:1597:2: note: here
  case V4L2_PIX_FMT_NV16:
  ^~~~

Rework to address a warnings due to the enablement of
-Wimplicit-fallthrough.

Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Cc: Gustavo A. R. Silva <gustavo@embeddedor.com>
[b.zolnierkie: fix patch summary]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190730152530.3055-1-anders.roxell@linaro.org

video: fbdev: radeonfb: Use dev_get_drvdata

Instead of using to_pci_dev + pci_get_drvdata,
use dev_get_drvdata to make code simpler.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[b.zolnierkie: fix patch summary and intendation]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190724131900.2039-1-hslester96@gmail.com

video: fbdev: sm712fb: Use dev_get_drvdata

Instead of using to_pci_dev + pci_get_drvdata,
use dev_get_drvdata to make code simpler.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Teddy Wang <teddy.wang@siliconmotion.com>
[b.zolnierkie: fix patch summary]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190724131744.1709-1-hslester96@gmail.com

video: fbdev: pvr2fb: remove unnecessary comparison of unsigned integer with < 0

There is no need to compare *var->xoffset* or *var->yoffset* with < 0
because such variables are of type unsigned, making it impossible to
hold a negative value.

Fix this by removing such comparisons.

Addresses-Coverity-ID: 1451964 ("Unsigned compared against 0")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190722203358.GA29111@embeddedor

efifb: BGRT: Improve efifb_bgrt_sanity_check

For various reasons, at least with x86 EFI firmwares, the xoffset and
yoffset in the BGRT info are not always reliable.

Extensive testing has shown that when the info is correct, the
BGRT image is always exactly centered horizontally (the yoffset variable
is more variable and not always predictable).

This commit simplifies / improves the bgrt_sanity_check to simply
check that the BGRT image is exactly centered horizontally and skips
(re)drawing it when it is not.

This fixes the BGRT image sometimes being drawn in the wrong place.

Cc: stable@vger.kernel.org
Fixes: 88fe4ceb2447 ("efifb: BGRT: Do not copy the boot graphics for non native resolutions")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: Peter Jones <pjones@redhat.com>,
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190721131918.10115-1-hdegoede@redhat.com

drm/xen-front: Make structure fb_funcs constant

Static structure fb_funcs, of type drm_framebuffer_funcs, is used only
when it is passed to drm_gem_fb_create_with_funcs() as its last
argument. drm_gem_fb_create_with_funcs does not modify its lst argument
(fb_funcs) and hence fb_funcs is never modified. Therefore make fb_funcs
constant to protect it from further modification.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190813062712.24993-1-nishkadg.linux@gmail.com

drm/vboxvideo: Make structure vbox_fb_helper_funcs constant

The static structure vbox_fb_helper_funcs, of type drm_fb_helper_funcs,
is used only when it is passed as the third argument to
drm_fb_helper_fbdev_setup(), which does not modify it. Hence make it
constant to protect it from unintended modifications.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190813062548.24770-1-nishkadg.linux@gmail.com

dma-fence: Store the timestamp in the same union as the cb_list

The timestamp and the cb_list are mutually exclusive, the cb_list can
only be added to prior to being signaled (and once signaled we drain),
while the timestamp is only valid upon being signaled. Both the
timestamp and the cb_list are only valid while the fence is alive, and
as soon as no references are held can be replaced by the rcu_head.

By reusing the union for the timestamp, we squeeze the base dma_fence
struct to 64 bytes on x86-64.

v2: Sort the union chronologically

Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Christian König <christian.koenig@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>.
Link: https://patchwork.freedesktop.org/patch/msgid/20190817153022.5749-1-chris@chris-wilson.co.uk

dma-fence: Simply wrap dma_fence_signal_locked with dma_fence_signal

Currently dma_fence_signal() tries to avoid the spinlock and only takes
it if absolutely required to walk the callback list. However, to allow
for some users to surreptitiously insert lazy signal callbacks that
do not depend on enabling the signaling mechanism around every fence,
we always need to notify the callbacks on signaling. As such, we will
always need to take the spinlock and dma_fence_signal() effectively
becomes a clone of dma_fence_signal_locked().

v2: Update the test_and_set_bit() before entering the spinlock.
v3: Drop the test_[and_set]_bit() before the spinlock, it's a caller
error so expected to be very unlikely.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Christian König <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190817152300.5370-1-chris@chris-wilson.co.uk

dma-fence: Avoid list_del during fence->cb_list iteration

Before we notify the fence signal callback, we remove the cb from the
list. However, since we are processing the entire list from underneath
the spinlock, we do not need to individual delete each element, but can
simply reset the link and the entire list.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190817144736.7826-4-chris@chris-wilson.co.uk

dma-fence: Shrink size of struct dma_fence

Rearrange the couple of 32-bit atomics hidden amongst the field of
pointers that unnecessarily caused the compiler to insert some padding,
shrinks the size of the base struct dma_fence from 80 to 72 bytes on
x86-64.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190817144736.7826-3-chris@chris-wilson.co.uk

drm/panel: tpo-td043mtea1: remove redundant assignment

Variable val is initialized to a value in a for-loop that is
never read and hence it is redundant. Remove it.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190817122124.29650-1-colin.king@canonical.com

drm/omap: displays: Remove unused panel drivers

drm_panel-based drivers for the ACX565AKM, LB035Q02, LS037V7DW01,
NL8048HL11, TD028TTEC1 and TD043MTEA1 are available, remove the
omapdrm-specific drivers.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190816122228.9475-3-laurent.pinchart@ideasonboard.com

video: omapfb2: Make standard and custom panel drivers mutually exclusive

Standard DRM panel drivers for several panels used by omapfb2 are now
available. Their module name clashes with the modules from
drivers/video/fbdev/omap2/omapfb/displays, part of the deprecated omapfb2
fbdev driver. As omapfb2 can only be compiled when the omapdrm driver is
disabled, and the DRM panel drivers are useless in that case, make the
omapfb2 panels depend on the standard DRM panels being disabled to fix
the name clash.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: dc2e1e5b279966 ("drm/panel: Add driver for the Toppoly TD043MTEA1 panel")
Fixes: 415b8dd0871188 ("drm/panel: Add driver for the Toppoly TD028TTEC1 panel")
Fixes: 1c8fc3f0c5d280 ("drm/panel: Add driver for the Sony ACX565AKM panel")
Fixes: c9cf4c2a3bd35f ("drm/panel: Add driver for the Sharp LS037V7DW01 panel")
Fixes: df439abe650177 ("drm/panel: Add driver for the NEC NL8048HL11 panel")
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> [added tags]
Link: https://patchwork.freedesktop.org/patch/msgid/20190816122228.9475-2-laurent.pinchart@ideasonboard.com

dma-buf: Restore seqlock around dma_resv updates

This reverts
67c97fb79a7f ("dma-buf: add reservation_object_fences helper")
dd7a7d1ff2f1 ("drm/i915: use new reservation_object_fences helper")
0e1d8083bddb ("dma-buf: further relax reservation_object_add_shared_fence")
5d344f58da76 ("dma-buf: nuke reservation_object seq number")

The scenario that defeats simply grabbing a set of shared/exclusive
fences and using them blissfully under RCU is that any of those fences
may be reallocated by a SLAB_TYPESAFE_BY_RCU fence slab cache. In this
scenario, while keeping the rcu_read_lock we need to establish that no
fence was changed in the dma_resv after a read (or full) memory barrier.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190814182401.25009-1-chris@chris-wilson.co.uk

drm/panel: Add driver for the Toppoly TD043MTEA1 panel

This panel is used on the OMAP3 Pandora.

The code is based on the omapdrm-specific panel-tpo-td043mtea1 driver.

v2:
- fix checkpatch warnings
  o (lcd == NULL) => (!lcd) (sam)
  o alignment to open '(' (sam)

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190813201101.30980-10-laurent.pinchart@ideasonboard.com

drm/panel: Add driver for the Toppoly TD028TTEC1 panel

This panel is used on the OpenMoko Neo FreeRunner and Neo 1973.

The code is based on the omapdrm-specific panel-tpo-td028ttec1 driver.

v2:
- fix checkpatch warnings:
  o (lcd == NULL) => (!lcd) (sam)
  o (1 << X) => BIT(X) (sam)

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190813201101.30980-9-laurent.pinchart@ideasonboard.com

drm/panel: Add driver for the Sony ACX565AKM panel

This panel is used on the Nokia N900.

The code is based on the omapdrm-specific panel-sony-acx565akm driver.
The hardware-related logic has been changed as little as possible to
avoid regressions as hardware availability is lacking to test the
changes. Follow-up patches should address the items listed in the TODO
list.

v2:
- fix checkpatch warning (lcd == NULL) => (!lcd) (sam)

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190813201101.30980-8-laurent.pinchart@ideasonboard.com

drm/panel: Add driver for the Sharp LS037V7DW01 panel

This panel is used on the TI SDP3430 board.

The code is based on the omapdrm-specific panel-sharp-ls037v7dw01
driver.

v2:
- fix checkpatch warning (lcd == NULL) => (!lcd) (sam)
- drop __exit_p() from remove. It caused a build warning.
  And no other panel drivers needs this (sam)

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190813201101.30980-7-laurent.pinchart@ideasonboard.com

drm/panel: Add driver for the NEC NL8048HL11 panel

This panel is used on the Zoom2/3/3630 SDP boards.

The code is based on the omapdrm-specific panel-nec-nl8048hl11 driver

v2:
- fix checkpatch warning (lcd == NULL) => (!lcd) (sam)

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190813201101.30980-6-laurent.pinchart@ideasonboard.com

drm/panel: Add driver for the LG Philips LB035Q02 panel

This panel is used on the Gumstix Overo Palo35.

The code is based on the omapdrm-specific panel-lgphilips-lb035q02
driver.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190813201101.30980-5-laurent.pinchart@ideasonboard.com

dt-bindings: display: panel: Add bindings for NEC NL8048HL11 panel

The NEC NL8048HL11 is a 10.4cm WVGA (800x480) panel with a 24-bit RGB
parallel data interface and an SPI control interface.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190813201101.30980-4-laurent.pinchart@ideasonboard.com