Hans de Goede [Sat, 26 Jul 2014 05:46:53 +0000 (22:46 -0700)]
Input: alps - use single touch data when v3 mt data contains only one finger
For v3 protocol devices, use the more accurate single touch data when the
mt data contains only one finger. Note the mt data reporting a finger count
of 1 should never happen, but better safe then sorry.
This brings the v3 bitmap handling in line with what the v4 code does,
allowing to factor out the common bits into a helper function.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Hans de Goede [Sat, 26 Jul 2014 05:44:42 +0000 (22:44 -0700)]
Input: alps - use standard contact tracking instead of DIY
When there are 2 fingers on the pad we don't know which one is which, so
use input_mt_assign_slots to make sure the right set of coordinates ends
up in the right slot.
Besides ensuring things end up in the right slot, this also results in a
nice cleanup, since sync_frame also handles non mt position and btn_touch
reporting.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Hans de Goede [Sat, 26 Jul 2014 05:43:35 +0000 (22:43 -0700)]
Input: alps - use struct input_mt_pos to track coordinates
This is a preparation patch for switching the DIY mt handling to using
input_mt_assign_slots && input_mt_sync_frame.
struct alps_fields is quite large, so while making changes to almost all uses
of it lets put it in our priv data instead of on the stack.
Having it in our priv data also allows using it directly for storing values
which need to be cached, rather then having separate x, y, z, fingers, etc.
copies in our priv data.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Hans de Goede [Sat, 26 Jul 2014 05:42:53 +0000 (22:42 -0700)]
Input: alps - process_bitmap: round down when spreading adjescent fingers over 2 points
This fixes 2 fingers at the same height or width on the touchpad getting
reported at different y / x coordinates.
Note num_bits is always at least 1.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Hans de Goede [Sat, 26 Jul 2014 05:41:51 +0000 (22:41 -0700)]
Input: alps - process_bitmap: fix counting of high point bits
alps_process_bitmap was resetting the point bit-count as soon as it saw
2 0 bits in a row. This means that unless the high point actually is at
the end of the bitmap, it would always get its num_bits set to 0.
Instead reset num_bits to 0 on a 0->1 transition, so that with > 2 fingers
we only count the number of bits occupied by the highest finger.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Hans de Goede [Sat, 26 Jul 2014 05:38:51 +0000 (22:38 -0700)]
Input: alps - process_bitmap: add alps_get_bitmap_points() helper function
Factor out the identical code for getting the bitmap points for x and y into
a helper function.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Hans de Goede [Sat, 26 Jul 2014 05:37:15 +0000 (22:37 -0700)]
Input: alps - process_bitmap: don't invert the Y-axis on Rushmore
Rushmore models don't have the Y-axis data in the bitmap inverted. Since
we now have 2 different Y orientations, make the Y bitmap data processing
use a forward loop like the X bitmap data processing, unifying the 2,
and invert the data later, except on Rushmore.
So far no-one has noticed this because the synaptics driver only uses the
non mt coordinates (except on clickpads, and there are no alps clickpads
using process_bitmap).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Hans de Goede [Sat, 26 Jul 2014 05:33:33 +0000 (22:33 -0700)]
Input: alps - improve 2-finger reporting on v3 models
V3 models only report mt bitmap data when there are 2 or more fingers on
the touchpad. So always generate 2 positions in alps_process_bitmap, and
for v3 models only fall back to st data when there was no mt data in a
mt packet (which should never happen).
This fixes 2 finger scrolling not working when using 2 fingers close to
each other.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Yunkang Tang [Sat, 26 Jul 2014 05:29:24 +0000 (22:29 -0700)]
Input: alps - fix rushmore packet decoding
Signed-off-by: Yunkang Tang <yunkang.tang@cn.alps.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pramod Gurav [Sat, 26 Jul 2014 01:41:39 +0000 (18:41 -0700)]
Input: soc_button_array - add missing memory allocation check
Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Dmitry Torokhov [Thu, 24 Jul 2014 20:27:18 +0000 (13:27 -0700)]
Input: wacom_serial4 - prepare for wacom USB moving to HID
wacom_wac.h will be moving to drivers/hid. Since we only need 3 definitions
from it let's simply copy them over.
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Dmitry Torokhov [Wed, 23 Jul 2014 17:03:10 +0000 (10:03 -0700)]
Input: ipaq-micro-ts - introduce open/close
Wire up open/close so we do not try to send events until someone uses them;
this also allows us to remove micro_ts_remove() and rely fully on managed
resources.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Dmitry Artamonow [Wed, 23 Jul 2014 16:56:01 +0000 (09:56 -0700)]
Input: driver for touchscreen on iPaq h3xxx
This adds a driver for the touchscreen connected to the Atmel
microcontroller on the iPAQ h3xxx series.
Based on a driver from handhelds.org 2.6.21 kernel, written by Alessandro
GARDICH, with the bulk of the code for the new input architecture rewritten
by Dmitry Atamonow, and the final polish by Linus Walleij.
Signed-off-by: Alessandro GARDICH <gremlin@gremlin.it>
Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Dmitry Torokhov [Thu, 24 Jul 2014 19:36:56 +0000 (12:36 -0700)]
Merge tag 'v3.16-rc6' into next
Merge with mainline to bring in changes to MFD to allow merging
ipaq-micro-ts driver.
Nick Dyer [Wed, 23 Jul 2014 19:49:04 +0000 (12:49 -0700)]
Input: atmel_mxt_ts - implement T44 message handling
maXTouch chips allow the reading of multiple messages in a single I2C
transaction, which reduces bus overhead and improves performance/latency. The
number of messages available to be read is given by the value in the T44
object which is located directly before the T5 object.
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Acked-by: Benson Leung <bleung@chromium.org>
Acked-by: Yufeng Shen <miletus@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Nick Dyer [Wed, 23 Jul 2014 19:48:13 +0000 (12:48 -0700)]
Input: atmel_mxt_ts - split message handler into separate functions
This is in preparation for support of the T44 message count object.
Also, cache T5 address to avoid lookup on every interrupt cycle.
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Acked-by: Benson Leung <bleung@chromium.org>
Acked-by: Yufeng Shen <miletus@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Nick Dyer [Wed, 23 Jul 2014 19:47:50 +0000 (12:47 -0700)]
Input: atmel_mxt_ts - decode T6 status messages
By storing the previous T6 status byte multiple debug output of the same
status can be suppressed (for example CFGERR).
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Acked-by: Benson Leung <bleung@chromium.org>
Acked-by: Yufeng Shen <miletus@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Nick Dyer [Wed, 23 Jul 2014 19:46:55 +0000 (12:46 -0700)]
Input: atmel_mxt_ts - add support for dynamic message size
The T5 object may have various sizes depending on the objects used on the
particular maXTouch chip and firmware version, therefore it can't be
hardcoded in the driver. Allocate a buffer on probe instead.
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Acked-by: Benson Leung <bleung@chromium.org>
Acked-by: Yufeng Shen <miletus@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Nick Dyer [Wed, 23 Jul 2014 19:45:49 +0000 (12:45 -0700)]
Input: atmel_mxt_ts - recover from bootloader on probe
The MXT device may be in bootloader mode on probe, due to:
1) APP CRC failure, either:
a) flash corruption
b) bad power or other intermittent problem while checking CRC
2) If the device has been reset 10 or more times without accessing comms
3) Warm probe, device was in bootloader mode already
This code attempts to recover from 1(b) and 3.
There is an additional complexity: we have to try two possible bootloader
addresses because the mapping is not one-to-one and we don't know the exact
model yet.
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Acked-by: Yufeng Shen <miletus@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Nick Dyer [Wed, 23 Jul 2014 19:45:26 +0000 (12:45 -0700)]
Input: atmel_mxt_ts - add bootloader addresses for new chips
Later chips (for example mXT1664S) different mappings for bootloader
addresses. This means that we must look at the family ID to determine
which address to use.
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Acked-by: Benson Leung <bleung@chromium.org>
Acked-by: Yufeng Shen <miletus@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Nick Dyer [Wed, 23 Jul 2014 19:42:40 +0000 (12:42 -0700)]
Input: atmel_mxt_ts - handle bootloader previously unlocked
On a warm probe, the device might be in a state where an flash operation was
not completed.
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Acked-by: Benson Leung <bleung@chromium.org>
Acked-by: Yufeng Shen <miletus@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Nick Dyer [Wed, 23 Jul 2014 19:41:58 +0000 (12:41 -0700)]
Input: atmel_mxt_ts - handle APP_CRC_FAIL on startup
If the bootloader on the touchscreen controller fails to initialise the
firmware image, it stays in bootloader mode and reports a failure. It is
possible to reflash a working firmware image from this state.
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Acked-by: Benson Leung <bleung@chromium.org>
Acked-by: Yufeng Shen <miletus@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Nick Dyer [Wed, 23 Jul 2014 19:40:09 +0000 (12:40 -0700)]
Input: atmel_mxt_ts - calculate and check CRC in config file
By validating the checksum, we can identify if the configuration is
corrupt. In addition, this patch writes the configuration in a short
series of block writes rather than as many individual values.
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Acked-by: Benson Leung <bleung@chromium.org>
Acked-by: Yufeng Shen <miletus@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Nick Dyer [Wed, 23 Jul 2014 19:38:48 +0000 (12:38 -0700)]
Input: atmel_mxt_ts - download device config using firmware loader
The existing implementation which encodes the configuration as a binary
blob in platform data is unsatisfactory since it requires a kernel
recompile for the configuration to be changed, and it doesn't deal well
with firmware changes that move values around on the chip.
Atmel define an ASCII format for the configuration which can be exported
from their tools. This patch implements a parser for that format which
loads the configuration via the firmware loader and sends it to the MXT
chip.
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Acked-by: Benson Leung <bleung@chromium.org>
Acked-by: Yufeng Shen <miletus@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Stephen Warren [Wed, 23 Jul 2014 19:23:23 +0000 (12:23 -0700)]
Input: atmel_mxt_ts - implement device tree support
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Benson Leung [Wed, 23 Jul 2014 19:22:27 +0000 (12:22 -0700)]
Input: atmel_mxt_ts - set pointer emulation on touchpads
Touchpads are pointers, so make sure to pass the correct values to
input_mt_report_pointer_emulation(). Without this, tap-to-click doesn't
work.
Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Nick Dyer [Wed, 23 Jul 2014 19:21:26 +0000 (12:21 -0700)]
Input: atmel_mxt_ts - move input device init into separate function
It is useful to initialise the input device later:
- Screen parameters may not be not known yet, for instance if waiting for
firmware loader to return.
- Device may be in bootloader mode on probe (but could still be recovered by
firmware download).
In addition, later devices have a different touchscreen object (T100) which
requires handling differently.
This also reduces the complexity of the probe function.
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Acked-by: Yufeng Shen <miletus@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Nick Dyer [Wed, 23 Jul 2014 18:25:55 +0000 (11:25 -0700)]
Input: atmel_mxt_ts - initialise IRQ before probing
The maXTouch chips use the CHG line to generate status events in bootloader
mode, and during configuration download, before there is enough information
to configure the input device. Therefore set up the interrupt handler
earlier.
However, this introduces states where parts of the interrupt processing
must not run. Use data->object_table as a way to tell whether the chip
information is valid, and data->input_dev as a way to tell whether it is
valid to generate input report.
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Acked-by: Benson Leung <bleung@chromium.org>
Acked-by: Yufeng Shen <miletus@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
David Herrmann [Mon, 21 Jul 2014 00:27:09 +0000 (17:27 -0700)]
Input: uinput - add UI_GET_VERSION ioctl
This ioctl is the counterpart to EVIOCGVERSION and returns the
uinput-version the kernel was compiled with.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
David Herrmann [Mon, 21 Jul 2014 00:16:23 +0000 (17:16 -0700)]
Input: uinput - uinput_validate_absbits() cleanup
This moves basic checks and setup from uinput_setup_device() into
uinput_validate_absbits() to make it easier to use. This way, we can call
it from other places without copying the boilerplate code.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Heiko Stuebner [Mon, 21 Jul 2014 17:02:11 +0000 (10:02 -0700)]
Input: zforce - add regulator handling
It's possible that the controller has an individually switchable power supply.
Therefore add support to control a supplying regulator.
As this is not always the case, the regulator is requested as optional.
Signed-off-by: Heiko Stuebner <heiko.stuebner@bq.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Linus Torvalds [Mon, 21 Jul 2014 04:04:16 +0000 (21:04 -0700)]
Linux 3.16-rc6
Linus Torvalds [Mon, 21 Jul 2014 03:44:53 +0000 (20:44 -0700)]
Merge tag 'staging-3.16-rc6' of git://git./linux/kernel/git/gregkh/staging
Pull more IIO driver fixes from Greg KH:
"Here are two IIO driver fixes for 3.16-rc6 that resolve some reported
issues"
* tag 'staging-3.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
iio: mma8452: Use correct acceleration units.
iio:core: Handle error when mask type is not separate
Linus Torvalds [Mon, 21 Jul 2014 03:44:18 +0000 (20:44 -0700)]
Merge tag 'usb-3.16-rc6' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are two USB patches that resolve some reported issues, one with
an odd HUB, and one in the chipidea driver"
* tag 'usb-3.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: Check if port status is equal to RxDetect
usb: chipidea: udc: Disable auto ZLP generation on ep0
Linus Torvalds [Mon, 21 Jul 2014 03:43:46 +0000 (20:43 -0700)]
Merge tag 'driver-core-3.16-rc6' of git://git./linux/kernel/git/gregkh/driver-core
Pull driver core fix from Greg KH:
"Here is a single driver core fix that reverts an older patch that has
been causing a number of reported problems with the platform devices.
This revert has been in linux-next for a while with no reported issues"
* tag 'driver-core-3.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
platform_get_irq: Revert to platform_get_resource if of_irq_get fails
Linus Torvalds [Mon, 21 Jul 2014 03:43:14 +0000 (20:43 -0700)]
Merge tag 'char-misc-3.16-rc6' of git://git./linux/kernel/git/gregkh/char-misc
Pull char/misc fix from Greg KH:
"Here's a single hyper-v driver fix for a reported issue"
* tag 'char-misc-3.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
Drivers: hv: hv_fcopy: fix a race condition for SMP guest
Linus Torvalds [Mon, 21 Jul 2014 03:39:28 +0000 (20:39 -0700)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull intel drm fixes from Dave Airlie:
"Intel fixes came in late, but since I debugged one of them I'll send
them on,
Two reverts, a quirk and one warn regression"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
Revert "drm/i915: reverse dp link param selection, prefer fast over wide again"
drm/i915: Track the primary plane correctly when reassigning planes
drm/i915: Ignore VBT backlight presence check on HP Chromebook 14
Revert "drm/i915: Don't set the 8to6 dither flag when not scaling"
Linus Torvalds [Mon, 21 Jul 2014 03:28:04 +0000 (20:28 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/rw/uml
Pull UML fixes from Richard Weinberger:
"Four fixes, all discovered by Trinity"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: segv: Save regs only in case of a kernel mode fault
um: Fix hung task in fix_range_common()
um: Ensure that a stub page cannot get unmapped
Revert "um: Fix wait_stub_done() error handling"
Linus Torvalds [Mon, 21 Jul 2014 03:21:05 +0000 (20:21 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
"We have two more fixes in my for-linus branch.
I was hoping to also include a fix for a btrfs deadlock with
compression enabled, but we're still nailing that one down"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
btrfs: test for valid bdev before kobj removal in btrfs_rm_device
Btrfs: fix abnormal long waiting in fsync
Linus Torvalds [Mon, 21 Jul 2014 02:55:44 +0000 (19:55 -0700)]
Merge tag 'nfs-for-3.16-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client fixes from Trond Myklebust:
"Apologies for the relative lateness of this pull request, however the
commits fix some issues with the NFS read/write code updates in
3.16-rc1 that can cause serious Oopsing when using small r/wsize. The
delay was mainly due to extra testing to make sure that the fixes
behave correctly.
Highlights include;
- Stable fix for an NFSv3 posix ACL regression
- Multiple fixes for regressions to the NFS generic read/write code:
- Fix page splitting bugs that come into play when a small
rsize/wsize read/write needs to be sent again (due to error
conditions or page redirty)
- Fix nfs_wb_page_cancel, which is called by the "invalidatepage"
method
- Fix 2 compile warnings about unused variables
- Fix a performance issue affecting unstable writes"
* tag 'nfs-for-3.16-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: Don't reset pg_moreio in __nfs_pageio_add_request
NFS: Remove 2 unused variables
nfs: handle multiple reqs in nfs_wb_page_cancel
nfs: handle multiple reqs in nfs_page_async_flush
nfs: change find_request to find_head_request
nfs: nfs_page should take a ref on the head req
nfs: mark nfs_page reqs with flag for extra ref
nfs: only show Posix ACLs in listxattr if actually present
Vasily Khoruzhick [Wed, 9 Jul 2014 00:57:42 +0000 (17:57 -0700)]
Input: s3c2410_ts - fix preparing/enabling clock
Use clk_prepare_enable/clk_disable_unprepare to make the driver
work properly with common clock framework.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Hans de Goede [Sun, 20 Jul 2014 20:35:44 +0000 (13:35 -0700)]
Input: add support for Wacom protocol 4 serial tablets
Recent version of xf86-input-wacom no longer support directly accessing
serial tablets. Instead xf86-input-wacom now expects all wacom tablets to
be driven by the kernel and to show up as evdev devices.
This has caused old serial Wacom tablets to stop working for people who still
have such tablets. Julian Squires has written a serio input driver to fix this:
https://github.com/tokenrove/wacom-serial-iv
This is a cleaned up version of this driver with improved Graphire support
(I own an old Graphire myself).
Signed-off-by: Julian Squires <julian@cipht.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Himangi Saraogi [Sat, 19 Jul 2014 23:16:02 +0000 (16:16 -0700)]
Input: max7359 - introduce the use of managed interfaces
This patch introduces the use of managed interfaces like devm_kzalloc,
devm_input_allocate_device, devm_request_threaded_irq etc. and does away
with the calls to free the allocated memory. The remove function is no
longer required and is completely done away with. Also, the labels in the
probe function are removed.
Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Richard Weinberger [Sun, 20 Jul 2014 11:39:27 +0000 (13:39 +0200)]
um: segv: Save regs only in case of a kernel mode fault
...otherwise me lose user mode regs and the resulting
stack trace is useless.
Signed-off-by: Richard Weinberger <richard@nod.at>
Richard Weinberger [Sun, 20 Jul 2014 11:16:20 +0000 (13:16 +0200)]
um: Fix hung task in fix_range_common()
If do_ops() fails we have to release current->mm->mmap_sem
otherwise the failing task will never terminate.
Reported-by: Toralf Förster <toralf.foerster@gmx.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
Richard Weinberger [Sun, 20 Jul 2014 11:09:15 +0000 (13:09 +0200)]
um: Ensure that a stub page cannot get unmapped
Trinity discovered an execution path such that a task
can unmap his stub page.
Reported-by: Toralf Förster <toralf.foerster@gmx.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
Richard Weinberger [Sun, 20 Jul 2014 10:56:34 +0000 (12:56 +0200)]
Revert "um: Fix wait_stub_done() error handling"
This reverts commit
0974a9cadc7886f7baaa458bb0c89f5c5f9d458e.
The real for for that issue is to release current->mm->mmap_sem in
fix_range_common().
Signed-off-by: Richard Weinberger <richard@nod.at>
Eric Sandeen [Mon, 7 Jul 2014 17:34:49 +0000 (12:34 -0500)]
btrfs: test for valid bdev before kobj removal in btrfs_rm_device
commit
99994cd btrfs: dev delete should remove sysfs entry
added a btrfs_kobj_rm_device, which dereferences device->bdev...
right after we check whether device->bdev might be NULL.
I don't honestly know if it's possible to have a NULL device->bdev
here, but assuming that it is (given the test), we need to move
the kobject removal to be under that test.
(Coverity spotted this)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Chris Mason <clm@fb.com>
Liu Bo [Thu, 17 Jul 2014 08:08:36 +0000 (16:08 +0800)]
Btrfs: fix abnormal long waiting in fsync
xfstests generic/127 detected this problem.
With commit
7fc34a62ca4434a79c68e23e70ed26111b7a4cf8, now fsync will only flush
data within the passed range. This is the cause of the above problem,
-- btrfs's fsync has a stage called 'sync log' which will wait for all the
ordered extents it've recorded to finish.
In xfstests/generic/127, with mixed operations such as truncate, fallocate,
punch hole, and mapwrite, we get some pre-allocated extents, and mapwrite will
mmap, and then msync. And I find that msync will wait for quite a long time
(about 20s in my case), thanks to ftrace, it turns out that the previous
fallocate calls 'btrfs_wait_ordered_range()' to flush dirty pages, but as the
range of dirty pages may be larger than 'btrfs_wait_ordered_range()' wants,
there can be some ordered extents created but not getting corresponding pages
flushed, then they're left in memory until we fsync which runs into the
stage 'sync log', and fsync will just wait for the system writeback thread
to flush those pages and get ordered extents finished, so the latency is
inevitable.
This adds a flush similar to btrfs_start_ordered_extent() in
btrfs_wait_logged_extents() to fix that.
Reviewed-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
Linus Torvalds [Sat, 19 Jul 2014 16:27:55 +0000 (06:27 -1000)]
Merge branch 'locking-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull locking fixes from Thomas Gleixner:
"The locking department delivers:
- A rather large and intrusive bundle of fixes to address serious
performance regressions introduced by the new rwsem / mcs
technology. Simpler solutions have been discussed, but they would
have been ugly bandaids with more risk than doing the right thing.
- Make the rwsem spin on owner technology opt-in for architectures
and enable it only on the known to work ones.
- A few fixes to the lockdep userspace library"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rwsem: Add CONFIG_RWSEM_SPIN_ON_OWNER
locking/mutex: Disable optimistic spinning on some architectures
locking/rwsem: Reduce the size of struct rw_semaphore
locking/rwsem: Rename 'activity' to 'count'
locking/spinlocks/mcs: Micro-optimize osq_unlock()
locking/spinlocks/mcs: Introduce and use init macro and function for osq locks
locking/spinlocks/mcs: Convert osq lock to atomic_t to reduce overhead
locking/spinlocks/mcs: Rename optimistic_spin_queue() to optimistic_spin_node()
locking/rwsem: Allow conservative optimistic spinning when readers have lock
tools/liblockdep: Account for bitfield changes in lockdeps lock_acquire
tools/liblockdep: Remove debug print left over from development
tools/liblockdep: Fix comparison of a boolean value with a value of 2
Linus Torvalds [Sat, 19 Jul 2014 16:26:43 +0000 (06:26 -1000)]
Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull scheduler fix from Thomas Gleixner:
"Prevent a possible divide by zero in the debugging code"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Fix possible divide by zero in avg_atom() calculation
Linus Torvalds [Sat, 19 Jul 2014 16:26:01 +0000 (06:26 -1000)]
Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"Three patches addressing shortcomings in the ARM gic interrupt chip
driver"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip: gic: Fix core ID calculation when topology is read from DT
irqchip: gic: Add binding probe for ARM GIC400
irqchip: gic: Add support for cortex a7 compatible string
Linus Torvalds [Sat, 19 Jul 2014 16:25:03 +0000 (06:25 -1000)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"A single fix for a long standing issue in the alarm timer subsystem,
which was noticed recently when people finally started to use alarm
timers for serious work"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
alarmtimer: Fix bug where relative alarm timers were treated as absolute
Linus Torvalds [Sat, 19 Jul 2014 16:23:27 +0000 (06:23 -1000)]
Merge branch 'core-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull RCU fixes from Thomas Gleixner:
"Two RCU patches:
- Address a serious performance regression on open/close caused by
commit
ac1bea85781e ("Make cond_resched() report RCU quiescent
states")
- Export RCU debug functions. Not a regression, but enablement to
address a serious recursion bug in the sl*b allocators in 3.17"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rcu: Reduce overhead of cond_resched() checks for RCU
rcu: Export debug_init_rcu_head() and and debug_init_rcu_head()
Linus Torvalds [Sat, 19 Jul 2014 06:49:47 +0000 (20:49 -1000)]
Merge tag 'fixes-for-linus' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"A smaller set of fixes this week, and all regression fixes:
- a handful of issues fixed on at91 with common clock conversion
- a set of fixes for Marvell mvebu (SMP, coherency, PM)
- a clock fix for i.MX6Q.
- ... and a SMP/hotplug fix for Exynos"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: EXYNOS: Fix core ID used by platsmp and hotplug code
ARM: at91/dt: add missing clocks property to pwm node in sam9x5.dtsi
ARM: at91/dt: fix usb0 clocks definition in sam9n12 dtsi
ARM: at91: at91sam9x5: correct typo error for ohci clock
ARM: clk-imx6q: parent lvds_sel input from upstream clock gates
ARM: mvebu: Fix coherency bus notifiers by using separate notifiers
ARM: mvebu: Fix the operand list in the inline asm of armada_370_xp_pmsu_idle_enter
ARM: mvebu: fix SMP boot for Armada 38x and Armada 375 Z1 in big endian
Dave Airlie [Sat, 19 Jul 2014 06:48:38 +0000 (16:48 +1000)]
Merge tag 'drm-intel-fixes-2014-07-18' of git://anongit.freedesktop.org/drm-intel
But in any case nothing really shocking in
here, 2 reverts, 1 quirk and a regression fix a WARN.
* tag 'drm-intel-fixes-2014-07-18' of git://anongit.freedesktop.org/drm-intel:
Revert "drm/i915: reverse dp link param selection, prefer fast over wide again"
drm/i915: Track the primary plane correctly when reassigning planes
drm/i915: Ignore VBT backlight presence check on HP Chromebook 14
Revert "drm/i915: Don't set the 8to6 dither flag when not scaling"
Linus Torvalds [Sat, 19 Jul 2014 06:46:55 +0000 (20:46 -1000)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Peter Anvin:
"A couple of key fixes and a few less critical ones. The main ones
are:
- add a .bss section to the PE/COFF headers when building with EFI
stub
- invoke the correct paravirt magic when building the espfix page
tables
Unfortunately both of these areas also have at least one additional
fix each still in thie pipeline, but which are not yet ready to push"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Remove unused variable "polling"
x86/espfix/xen: Fix allocation of pages for paravirt page tables
x86/efi: Include a .bss section within the PE/COFF headers
efi: fdt: Do not report an error during boot if UEFI is not available
efi/arm64: efistub: remove local copy of linux_banner
Linus Torvalds [Sat, 19 Jul 2014 06:39:34 +0000 (20:39 -1000)]
Merge tag 'rdma-for-linus' of git://git./linux/kernel/git/roland/infiniband
Pull infiniband/rdma fixes from Roland Dreier:
- cxgb4 hardware driver regression fixes
- mlx5 hardware driver regression fixes
* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
IB/mlx5: Enable "block multicast loopback" for kernel consumers
RDMA/cxgb4: Call iwpm_init() only once
mlx5_core: Fix possible race between mr tree insert/delete
RDMA/cxgb4: Initialize the device status page
RDMA/cxgb4: Clean up connection on ARP error
RDMA/cxgb4: Fix skb_leak in reject_cr()
Linus Torvalds [Sat, 19 Jul 2014 06:37:24 +0000 (20:37 -1000)]
Merge tag 'hwmon-for-linus' of git://git./linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
"More fallout from module tests and code inspection.
Fixes to temperature limit write operations in adt7470 driver. Also,
dashes are not allowed in hwmon 'name' attributes. Fix drivers where
necessary"
* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (adt7470) Fix writes to temperature limit registers
hwmon: (da9055) Don't use dash in the name attribute
hwmon: (da9052) Don't use dash in the name attribute
Linus Torvalds [Sat, 19 Jul 2014 06:36:13 +0000 (20:36 -1000)]
Merge tag 'iommu-fixes-v3.16-rc5' of git://git./linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
"A couple of fixes for the Freescale PAMU driver queued up:
- fix PAMU window size check.
- fix the device domain attach condition.
- fix the error condition during iommu group"
* tag 'iommu-fixes-v3.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/fsl: Fix the error condition during iommu group
iommu/fsl: Fix the device domain attach condition.
iommu/fsl: Fix PAMU window size check.
Linus Torvalds [Sat, 19 Jul 2014 06:28:27 +0000 (20:28 -1000)]
Merge tag 'pm+acpi-3.16-rc6' of git://git./linux/kernel/git/rafael/linux-pm
Pull ACPI and power management fixes from Rafael Wysocki:
"These are a few recent regression fixes, a revert of the ACPI video
commit I promised, a system resume fix related to request_firmware(),
an ACPI video quirk for one more Win8-oriented BIOS, an ACPI device
enumeration documentation update and a few fixes for ARM cpufreq
drivers.
Specifics:
- Fix for a recently introduced NULL pointer dereference in the core
system suspend code occuring when platforms without ACPI attempt to
use the "freeze" sleep state from Zhang Rui.
- Fix for a recently introduced build warning in cpufreq headers from
Brian W Hart.
- Fix for a 3.13 cpufreq regression related to sysem resume that
triggers on some systems with multiple CPU clusters from Viresh
Kumar.
- Fix for a 3.4 regression in request_firmware() resulting in
WARN_ON()s on some systems during system resume from Takashi Iwai.
- Revert of the ACPI video commit that changed the default value of
the video.brightness_switch_enabled command line argument to 0 as
it has been reported to break existing setups.
- ACPI device enumeration documentation update to take recent code
changes into account and make the documentation match the code
again from Darren Hart.
- Fixes for the sa1110, imx6q, kirkwood, and cpu0 cpufreq drivers
from Linus Walleij, Nicolas Del Piano, Quentin Armitage, Viresh
Kumar.
- New ACPI video blacklist entry for HP ProBook 4540s from Hans de
Goede"
* tag 'pm+acpi-3.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: make table sentinel macros unsigned to match use
cpufreq: move policy kobj to policy->cpu at resume
cpufreq: cpu0: OPPs can be populated at runtime
cpufreq: kirkwood: Reinstate cpufreq driver for ARCH_KIRKWOOD
cpufreq: imx6q: Select PM_OPP
cpufreq: sa1110: set memory type for h3600
ACPI / video: Add use_native_backlight quirk for HP ProBook 4540s
PM / sleep: fix freeze_ops NULL pointer dereferences
PM / sleep: Fix request_firmware() error at resume
Revert "ACPI / video: change acpi-video brightness_switch_enabled default to 0"
ACPI / documentation: Remove reference to acpi_platform_device_ids from enumeration.txt
Linus Torvalds [Sat, 19 Jul 2014 06:27:23 +0000 (20:27 -1000)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"One nouveau deadlock fix, one qxl irq handling fix, and a set of
radeon pageflipping changes that fix regressions in pageflipping since
-rc1 along with a leak and backlight fix.
The pageflipping fixes are a bit bigger than I'd like, but there has
been a few people focused on testing them"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/radeon: Make classic pageflip completion path less racy.
drm/radeon: Add missing vblank_put in pageflip ioctl error path.
drm/radeon: Remove redundant fence unref in pageflip path.
drm/radeon: Complete page flip even if waiting on the BO fence fails
drm/radeon: Move pinning the BO back to radeon_crtc_page_flip()
drm/radeon: Prevent too early kms-pageflips triggered by vblank.
drm/radeon: set default bl level to something reasonable
drm/radeon: avoid leaking edid data
drm/qxl: return IRQ_NONE if it was not our irq
drm/nouveau/therm: fix a potential deadlock in the therm monitoring code
Linus Torvalds [Sat, 19 Jul 2014 06:26:46 +0000 (20:26 -1000)]
Merge tag 'random_for_linus_stable' of git://git./linux/kernel/git/tytso/random
Pull /dev/random fix from Ted Ts'o:
"Fix a BUG splat found by trinity"
* tag 'random_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
random: check for increase of entropy_count because of signed conversion
Linus Torvalds [Sat, 19 Jul 2014 06:25:54 +0000 (20:25 -1000)]
Merge git://git./linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This push fixes a boot hang in virt guests when the virtio RNG is
enabled"
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
hwrng: virtio - ensure reads happen after successful probe
hwrng: fetch randomness only after device init
Hannes Frederic Sowa [Fri, 18 Jul 2014 21:26:41 +0000 (17:26 -0400)]
random: check for increase of entropy_count because of signed conversion
The expression entropy_count -= ibytes << (ENTROPY_SHIFT + 3) could
actually increase entropy_count if during assignment of the unsigned
expression on the RHS (mind the -=) we reduce the value modulo
2^width(int) and assign it to entropy_count. Trinity found this.
[ Commit modified by tytso to add an additional safety check for a
negative entropy_count -- which should never happen, and to also add
an additional paranoia check to prevent overly large count values to
be passed into urandom_read(). ]
Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Tomasz Figa [Tue, 15 Jul 2014 17:59:18 +0000 (02:59 +0900)]
ARM: EXYNOS: Fix core ID used by platsmp and hotplug code
When CPU topology is specified in device tree, cpu_logical_map() does
not return core ID anymore, but rather full MPIDR value. This breaks
existing calculation of PMU register offsets on Exynos SoCs.
This patch fixes the problem by adjusting the code to use only core ID
bits of the value returned by cpu_logical_map() to allow CPU topology to
be specified in device tree on Exynos SoCs.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Fri, 18 Jul 2014 21:40:17 +0000 (14:40 -0700)]
Merge tag 'imx-fixes-3.16-2' of git://git./linux/kernel/git/shawnguo/linux into fixes
Merge "ARM: imx: fixes for 3.16, 2nd take" from Shawn Guo:
The i.MX fixes for 3.16, 2nd take:
It fixes a hard machine hang regression for boards where only pcie is
active but no sata, as the latest imx6-pcie driver is no longer enabling
the upstream clock directly but only lvds clk out.
* tag 'imx-fixes-3.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: clk-imx6q: parent lvds_sel input from upstream clock gates
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Fri, 18 Jul 2014 21:39:18 +0000 (14:39 -0700)]
Merge tag 'at91-fixes' of git://github.com/at91linux/linux-at91 into fixes
Merge "at91: fixes for 3.16 #2" from Nicolas Ferre:
Second AT91 fixes series for 3.16
- fix clock definitions after the move to CCF for:
* at91sam9n12 (ohci)
* at91sam9x5 (ohci, pwm)
* tag 'at91-fixes' of git://github.com/at91linux/linux-at91:
ARM: at91/dt: add missing clocks property to pwm node in sam9x5.dtsi
ARM: at91/dt: fix usb0 clocks definition in sam9n12 dtsi
ARM: at91: at91sam9x5: correct typo error for ohci clock
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Fri, 18 Jul 2014 21:38:28 +0000 (14:38 -0700)]
Merge tag 'mvebu-fixes-3.16-3' of git://git.infradead.org/linux-mvebu into fixes
Merge "mvebu fixes for v3.16 (round 3)" from Jason Cooper:
- Fix SMP boot on 38x/375 in big endian
- Fix operand list for pmsu on 370/XP
- Fix coherency bus notifiers
* tag 'mvebu-fixes-3.16-3' of git://git.infradead.org/linux-mvebu:
ARM: mvebu: Fix coherency bus notifiers by using separate notifiers
ARM: mvebu: Fix the operand list in the inline asm of armada_370_xp_pmsu_idle_enter
ARM: mvebu: fix SMP boot for Armada 38x and Armada 375 Z1 in big endian
Signed-off-by: Olof Johansson <olof@lixom.net>
Daniel Mack [Tue, 15 Jul 2014 16:47:52 +0000 (09:47 -0700)]
Input: add driver for Microchip's CAP1106
This patch adds a driver for Microchips CAP1106, an I2C driven, 6-channel
capacitive touch sensor.
For now, only the capacitive buttons are supported, and no specific
settings that can be tweaked for individual channels, except for the
device-wide sensitivity gain. The defaults seem to work just fine out of
the box, so I'll leave configurable parameters for someone who's in need
of them and who can actually measure the impact. All registers are
prepared, however. Many of them are just not used for now.
The implementation does not make any attempt to be compatible to platform
data driven boards, but fully depends on CONFIG_OF.
Power management functions are also left for volounteers with the ability
to actually test them.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Fabian Frederick [Wed, 9 Jul 2014 16:45:57 +0000 (09:45 -0700)]
Input: edt-ft5x06 - remove unnecessary null test
Fix checkpatch warning:
"WARNING: debugfs_remove_recursive(NULL) is safe this check is probably not required"
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Fabian Frederick [Wed, 9 Jul 2014 00:56:23 +0000 (17:56 -0700)]
Input: keyspan_remote - remove unnecessary break after goto
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Linus Torvalds [Fri, 18 Jul 2014 16:26:04 +0000 (06:26 -1000)]
Merge tag 'gfs2-fixes' of git://git./linux/kernel/git/steve/gfs2-3.0-fixes
Pull gfs2 fixes from Steven Whitehouse:
"This patch set contains two minor docs/spelling fixes, some fixes for
flock, a change to use GFP_NOFS to avoid recursion on a rarely used
code path and a fix for a race relating to the glock lru"
* tag 'gfs2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes:
GFS2: fs/gfs2/rgrp.c: kernel-doc warning fixes
GFS2: memcontrol: Spelling s/invlidate/invalidate/
GFS2: Allow caching of glocks for flock
GFS2: Allow flocks to use normal glock dq rather than dq_wait
GFS2: replace count*size kzalloc by kcalloc
GFS2: Use GFP_NOFS when allocating glocks
GFS2: Fix race in glock lru glock disposal
GFS2: Only wait for demote when last holder is dequeued
Linus Torvalds [Fri, 18 Jul 2014 16:25:05 +0000 (06:25 -1000)]
Merge tag 'dm-3.16-fixes-2' of git://git./linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
"Fix the dm-thinp and dm-cache targets to disallow changing the data
device's block size"
* tag 'dm-3.16-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm cache metadata: do not allow the data block size to change
dm thin metadata: do not allow the data block size to change
Linus Torvalds [Fri, 18 Jul 2014 16:23:34 +0000 (06:23 -1000)]
Merge tag 'upstream-3.16-rc6' of git://git.infradead.org/linux-ubifs
Pull UBI fixes from Artem Bityutskiy:
"Two UBI fastmap-related fixes for v3.16:
- fix UBI fastmap support which we broke in 3.16-rc1 by reversing the
volumes RB-tree sorting criteria.
- make sure that we scrub all PEBs where we see bit-flips - we were
missing some of them when the fastmap feature was enabled"
* tag 'upstream-3.16-rc6' of git://git.infradead.org/linux-ubifs:
UBI: fastmap: do not miss bit-flips
UBI: fix the volumes tree sorting criteria
Linus Torvalds [Fri, 18 Jul 2014 16:21:43 +0000 (06:21 -1000)]
Merge tag 'xfs-for-linus-3.16-rc5' of git://oss.sgi.com/xfs/xfs
Pull xfs fixes from Dave Chinner:
"Fixes for low memory perforamnce regressions and a quota inode
handling regression.
These are regression fixes for issues recently introduced - the change
in the stack switch location is fairly important, so I've held off
sending this update until I was sure that it still addresses the stack
usage problem the original solved. So while the commits in the xfs
tree are recent, it has been under tested for several weeks now"
* tag 'xfs-for-linus-3.16-rc5' of git://oss.sgi.com/xfs/xfs:
xfs: null unused quota inodes when quota is on
xfs: refine the allocation stack switch
Revert "xfs: block allocation work needs to be kswapd aware"
Boris BREZILLON [Thu, 17 Jul 2014 19:03:58 +0000 (21:03 +0200)]
ARM: at91/dt: add missing clocks property to pwm node in sam9x5.dtsi
The pwm driver requires a clocks property referencing the pwm peripheral
clk.
Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Boris BREZILLON [Mon, 14 Jul 2014 06:39:27 +0000 (08:39 +0200)]
ARM: at91/dt: fix usb0 clocks definition in sam9n12 dtsi
udphs_clk (USB Device Controller clock) is referenced instead of
uhphs_clk (USB Host Controller clock).
Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Bo Shen [Mon, 14 Jul 2014 03:08:14 +0000 (11:08 +0800)]
ARM: at91: at91sam9x5: correct typo error for ohci clock
Correct the typo error for the second "uhphs_clk".
Signed-off-by: Bo Shen <voice.shen@atmel.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Tomasz Figa [Thu, 17 Jul 2014 15:23:44 +0000 (17:23 +0200)]
irqchip: gic: Fix core ID calculation when topology is read from DT
Certain GIC implementation, namely those found on earlier, single
cluster, Exynos SoCs, have registers mapped without per-CPU banking,
which means that the driver needs to use different offset for each CPU.
Currently the driver calculates the offset by multiplying value returned
by cpu_logical_map() by CPU offset parsed from DT. This is correct when
CPU topology is not specified in DT and aforementioned function returns
core ID alone. However when DT contains CPU topology, the function
changes to return cluster ID as well, which is non-zero on mentioned
SoCs and so breaks the calculation in GIC driver.
This patch fixes this by masking out cluster ID in CPU offset
calculation so that only core ID is considered. Multi-cluster Exynos
SoCs already have banked GIC implementations, so this simple fix should
be enough.
Reported-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reported-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Fixes: db0d4db22a78d ("ARM: gic: allow GIC to support non-banked setups")
Cc: <stable@vger.kernel.org> # v3.3+
Link: https://lkml.kernel.org/r/1405610624-18722-1-git-send-email-t.figa@samsung.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Fabian Frederick [Wed, 2 Jul 2014 20:05:27 +0000 (22:05 +0200)]
GFS2: fs/gfs2/rgrp.c: kernel-doc warning fixes
Cc: cluster-devel@redhat.com
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Geert Uytterhoeven [Sun, 29 Jun 2014 10:21:39 +0000 (12:21 +0200)]
GFS2: memcontrol: Spelling s/invlidate/invalidate/
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: cluster-devel@redhat.com
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Bob Peterson [Thu, 26 Jun 2014 14:47:48 +0000 (10:47 -0400)]
GFS2: Allow caching of glocks for flock
This patch removes the GLF_NOCACHE flag from the glocks associated with
flocks. There should be no good reason not to cache glocks for flocks:
they only force the glock to be demoted before they can be reacquired,
which can slow down performance and even cause glock hangs, especially
in cases where the flocks are held in Shared (SH) mode.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Bob Peterson [Thu, 26 Jun 2014 14:46:25 +0000 (10:46 -0400)]
GFS2: Allow flocks to use normal glock dq rather than dq_wait
This patch allows flock glocks to use a non-blocking dequeue rather
than dq_wait. It also reverts the previous patch I had posted regarding
dq_wait. The reverted patch isn't necessarily a bad idea, but I decided
this might avoid unforeseen side effects, and was therefore safer.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Fabian Frederick [Wed, 25 Jun 2014 18:40:45 +0000 (20:40 +0200)]
GFS2: replace count*size kzalloc by kcalloc
kcalloc manages count*sizeof overflow.
Cc: cluster-devel@redhat.com
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Steven Whitehouse [Mon, 23 Jun 2014 13:50:20 +0000 (14:50 +0100)]
GFS2: Use GFP_NOFS when allocating glocks
Normally GFP_KERNEL is ok here, but there is now a rarely used code path
relating to deallocation of unlinked inodes (in certain corner cases)
which if hit at times of memory shortage can cause recursion while
trying to free memory.
One solution would be to try and move the gfs2_glock_get() call so
that it is no longer called while another glock is held, but that
doesn't look at all easy, so GFP_NOFS is the best solution for the
time being.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Steven Whitehouse [Mon, 23 Jun 2014 13:43:32 +0000 (14:43 +0100)]
GFS2: Fix race in glock lru glock disposal
We must not leave items on the LRU list with GLF_LOCK set, since
they can be removed if the glock is brought back into use, which
may then potentially result in a hang, waiting for GLF_LOCK to
clear.
It doesn't happen very often, since it requires a glock that has
not been used for a long time to be brought back into use at the
same moment that the shrinker is part way through disposing of
glocks.
The fix is to set GLF_LOCK at a later time, when we already know
that the other locks can be obtained. Also, we now only release
the lru_lock in case a resched is needed, rather than on every
iteration.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Bob Peterson [Fri, 20 Jun 2014 13:36:41 +0000 (09:36 -0400)]
GFS2: Only wait for demote when last holder is dequeued
Function gfs2_glock_dq_wait is supposed to dequeue a glock and then
wait for the lock to be demoted. The problem is, if this is a shared
lock, its demote will depend on the other holders, which means you
might end up waiting forever because the other process is blocked.
This problem is especially apparent when dealing with nested flocks.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Lucas Stach [Thu, 17 Jul 2014 10:20:14 +0000 (12:20 +0200)]
ARM: clk-imx6q: parent lvds_sel input from upstream clock gates
The i.MX6 reference manual doesn't make a clear distinction
between the fixed clock divider and the enable gate for the
pcie and sata reference clocks. This lead to the lvds mux
inputs in the imx6q clk driver to be parented from the
ref clock (which is the divider) instead of the actual gate,
which in turn prevents the upstream clock to actually be
enabled when lvds clk out is active.
This fixes a hard machine hang regression in kernel 3.16 for
boards where only pcie is active but no sata, as with this
kernel version the imx6-pcie driver is no longer enabling
the upstream clock directly but only lvds clk out.
Reported-by: Arne Ruhnau <arne.ruhnau@target-sg.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Arne Ruhnau <arne.ruhnau@target-sg.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Dexuan Cui [Wed, 16 Jul 2014 07:00:45 +0000 (00:00 -0700)]
Drivers: hv: hv_fcopy: fix a race condition for SMP guest
We should schedule the 5s "timer work" before starting the data transfer,
otherwise, the data transfer code may finish so fast on another
virtual cpu that when the code(fcopy_write()) trying to cancel the 5s
"timer work" can occasionally fail because the "timer work" may haven't
been scheduled yet and as a result the fcopy process will be aborted
wrongly by fcopy_work_func() in 5s.
Thank Liz Zhang <lizzha@microsoft.com> for the initial investigation
on the bug.
This addresses https://bugzilla.redhat.com/show_bug.cgi?id=
1118123
Tested-by: Liz Zhang <lizzha@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rafael J. Wysocki [Fri, 18 Jul 2014 00:57:30 +0000 (02:57 +0200)]
Merge branches 'pm-sleep' and 'pm-cpufreq'
* pm-sleep:
PM / sleep: fix freeze_ops NULL pointer dereferences
PM / sleep: Fix request_firmware() error at resume
* pm-cpufreq:
cpufreq: make table sentinel macros unsigned to match use
cpufreq: move policy kobj to policy->cpu at resume
cpufreq: cpu0: OPPs can be populated at runtime
cpufreq: kirkwood: Reinstate cpufreq driver for ARCH_KIRKWOOD
cpufreq: imx6q: Select PM_OPP
cpufreq: sa1110: set memory type for h3600
Brian W Hart [Fri, 27 Jun 2014 21:09:39 +0000 (16:09 -0500)]
cpufreq: make table sentinel macros unsigned to match use
Commit
5eeaf1f18973 (cpufreq: Fix build error on some platforms that
use cpufreq_for_each_*) moved function cpufreq_next_valid() to a public
header. Warnings are now generated when objects including that header
are built with -Wsign-compare (as an out-of-tree module might be):
.../include/linux/cpufreq.h: In function ‘cpufreq_next_valid’:
.../include/linux/cpufreq.h:519:27: warning: comparison between signed
and unsigned integer expressions [-Wsign-compare]
while ((*pos)->frequency != CPUFREQ_TABLE_END)
^
.../include/linux/cpufreq.h:520:25: warning: comparison between signed
and unsigned integer expressions [-Wsign-compare]
if ((*pos)->frequency != CPUFREQ_ENTRY_INVALID)
^
Constants CPUFREQ_ENTRY_INVALID and CPUFREQ_TABLE_END are signed, but
are used with unsigned member 'frequency' of cpufreq_frequency_table.
Update the macro definitions to be explicitly unsigned to match their
use.
This also corrects potentially wrong behavior of clk_rate_table_iter()
if unsigned long is wider than usigned int.
Fixes: 5eeaf1f18973 (cpufreq: Fix build error on some platforms that use cpufreq_for_each_*)
Signed-off-by: Brian W Hart <hartb@linux.vnet.ibm.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Gavin Guo [Thu, 17 Jul 2014 17:12:13 +0000 (01:12 +0800)]
usb: Check if port status is equal to RxDetect
When using USB 3.0 pen drive with the [AMD] FCH USB XHCI Controller
[1022:7814], the second hotplugging will experience the USB 3.0 pen
drive is recognized as high-speed device. After bisecting the kernel,
I found the commit number
41e7e056cdc662f704fa9262e5c6e213b4ab45dd
(USB: Allow USB 3.0 ports to be disabled.) causes the bug. After doing
some experiments, the bug can be fixed by avoiding executing the function
hub_usb3_port_disable(). Because the port status with [AMD] FCH USB
XHCI Controlleris [1022:7814] is already in RxDetect
(I tried printing out the port status before setting to Disabled state),
it's reasonable to check the port status before really executing
hub_usb3_port_disable().
Fixes: 41e7e056cdc6 (USB: Allow USB 3.0 ports to be disabled.)
Signed-off-by: Gavin Guo <gavin.guo@canonical.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dave Airlie [Thu, 17 Jul 2014 23:59:21 +0000 (09:59 +1000)]
Merge branch 'drm-fixes-3.16' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
A few more fixes for 3.16. The pageflipping fixes I dropped last week
have finally shaped up so this is mostly fixes for fallout from the
pageflipping code changes. Also fix a memory leak and a black screen
when restoring the backlight on console unblanking.
* 'drm-fixes-3.16' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: Make classic pageflip completion path less racy.
drm/radeon: Add missing vblank_put in pageflip ioctl error path.
drm/radeon: Remove redundant fence unref in pageflip path.
drm/radeon: Complete page flip even if waiting on the BO fence fails
drm/radeon: Move pinning the BO back to radeon_crtc_page_flip()
drm/radeon: Prevent too early kms-pageflips triggered by vblank.
drm/radeon: set default bl level to something reasonable
drm/radeon: avoid leaking edid data
Abbas Raza [Thu, 17 Jul 2014 11:34:31 +0000 (19:34 +0800)]
usb: chipidea: udc: Disable auto ZLP generation on ep0
There are 2 methods for ZLP (zero-length packet) generation:
1) In software
2) Automatic generation by device controller
1) is implemented in UDC driver and it attaches ZLP to IN packet if
descriptor->size < wLength
2) can be enabled/disabled by setting ZLT bit in the QH
When gadget ffs is connected to ubuntu host, the host sends
get descriptor request and wLength in setup packet is 255 while the
size of descriptor which will be sent by gadget in IN packet is
64 byte. So the composite driver sets req->zero = 1.
In UDC driver following code will be executed then
if (hwreq->req.zero && hwreq->req.length
&& (hwreq->req.length % hwep->ep.maxpacket == 0))
add_td_to_list(hwep, hwreq, 0);
Case-A:
So in case of ubuntu host, UDC driver will attach a ZLP to the IN packet.
ubuntu host will request 255 byte in IN request, gadget will send 64 byte
with ZLP and host will come to know that there is no more data.
But hold on, by default ZLT=0 for endpoint 0 so hardware also tries to
automatically generate the ZLP which blocks enumeration for ~6 seconds due
to endpoint 0 STALL, NAKs are sent to host for any requests (OUT/PING)
Case-B:
In case when gadget ffs is connected to Apple device, Apple device sends
setup packet with wLength=64. So descriptor->size = 64 and wLength=64
therefore req->zero = 0 and UDC driver will not attach any ZLP to the
IN packet. Apple device requests 64 bytes, gets 64 bytes and doesn't
further request for IN data. But ZLT=0 by default for endpoint 0 so
hardware tries to automatically generate the ZLP which blocks enumeration
for ~6 seconds due to endpoint 0 STALL, NAKs are sent to host for any
requests (OUT/PING)
According to USB2.0 specs:
8.5.3.2 Variable-length Data Stage
A control pipe may have a variable-length data phase in which the
host requests more data than is contained in the specified data
structure. When all of the data structure is returned to the host,
the function should indicate that the Data stage is ended by
returning a packet that is shorter than the MaxPacketSize for the
pipe. If the data structure is an exact multiple of wMaxPacketSize
for the pipe, the function will return a zero-length packet to indicate
the end of the Data stage.
In Case-A mentioned above:
If we disable software ZLP generation & ZLT=0 for endpoint 0 OR if software
ZLP generation is not disabled but we set ZLT=1 for endpoint 0 then
enumeration doesn't block for 6 seconds.
In Case-B mentioned above:
If we disable software ZLP generation & ZLT=0 for endpoint then enumeration
still blocks due to ZLP automatically generated by hardware and host not needing
it. But if we keep software ZLP generation enabled but we set ZLT=1 for
endpoint 0 then enumeration doesn't block for 6 seconds.
So the proper solution for this issue seems to disable automatic ZLP generation
by hardware (i.e by setting ZLT=1 for endpoint 0) and let software (UDC driver)
handle the ZLP generation based on req->zero field.
Cc: stable@vger.kernel.org
Signed-off-by: Abbas Raza <Abbas_Raza@mentor.com>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rafael J. Wysocki [Thu, 17 Jul 2014 23:15:17 +0000 (01:15 +0200)]
Merge branches 'acpi-scan' and 'acpi-video'
* acpi-scan:
ACPI / documentation: Remove reference to acpi_platform_device_ids from enumeration.txt
* acpi-video:
ACPI / video: Add use_native_backlight quirk for HP ProBook 4540s
Revert "ACPI / video: change acpi-video brightness_switch_enabled default to 0"
Linus Torvalds [Thu, 17 Jul 2014 18:02:35 +0000 (08:02 -1000)]
Merge tag 'stable/for-linus-3.16-rc5-tag' of git://git./linux/kernel/git/xen/tip
Pull Xen fixes from Konrad Rzeszutek Wilk:
"Two fixes found during migration of PV guests. David would be the one
doing this pull but he is on vacation.
Fixes:
- fix console deadlock when resuming PV guests
- fix regression hit when ballooning and resuming PV guests"
* tag 'stable/for-linus-3.16-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/balloon: set ballooned out pages as invalid in p2m
xen/manage: fix potential deadlock when resuming the console
Linus Torvalds [Thu, 17 Jul 2014 17:57:33 +0000 (07:57 -1000)]
Merge tag 'trace-fixes-v3.16-rc5-v2' of git://git./linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"A few more fixes for ftrace infrastructure.
I was cleaning out my INBOX and found two fixes from zhangwei from a
year ago that were lost in my mail. These fix an inconsistency
between trace_puts() and the way trace_printk() works. The reason
this is important to fix is because when trace_printk() doesn't have
any arguments, it turns into a trace_puts(). Not being able to enable
a stack trace against trace_printk() because it does not have any
arguments is quite confusing. Also, the fix is rather trivial and low
risk.
While porting some changes to PowerPC I discovered that it still has
the function graph tracer filter bug that if you also enable stack
tracing the function graph tracer filter is ignored. I fixed that up.
Finally, Martin Lau, fixed a bug that would cause readers of the
ftrace ring buffer to block forever even though it was suppose to be
NONBLOCK"
This also includes the fix from an earlier pull request:
"Oleg Nesterov fixed a memory leak that happens if a user creates a
tracing instance, sets up a filter in an event, and then removes that
instance. The filter allocates memory that is never freed when the
instance is destroyed"
* tag 'trace-fixes-v3.16-rc5-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ring-buffer: Fix polling on trace_pipe
tracing: Add TRACE_ITER_PRINTK flag check in __trace_puts/__trace_bputs
tracing: Fix graph tracer with stack tracer on other archs
tracing: Add ftrace_trace_stack into __trace_puts/__trace_bputs
tracing: instance_rmdir() leaks ftrace_event_file->filter
Mario Kleiner [Thu, 17 Jul 2014 00:24:45 +0000 (02:24 +0200)]
drm/radeon: Make classic pageflip completion path less racy.
Need to protect mmio flip programming by event lock as well.
Need to also first enable pflip irq, then mmio program,
otherwise a flip completion may get unnoticed in the vblank
of actual completion if the flip is programmed, but
radeon_flip_work_func gets preempted immediately after
mmio programming and before vblank. In that case the
vblank irq handler wouldn't run radeon_crtc_handle_vblank()
with the completion check routine, miss the completed flip,
and only notice one vblank after actual completion, causing
a false/delayed report of flip completion.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mario Kleiner [Wed, 16 Jul 2014 23:37:53 +0000 (01:37 +0200)]
drm/radeon: Add missing vblank_put in pageflip ioctl error path.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>