Gabor Juhos [Fri, 29 Nov 2013 20:18:48 +0000 (20:18 +0000)]
generic: ar8216: add AR8337N switch support
This patch is needed to use the switch inside the Sitecom WLR-8100;
it was unusable and detected as Generic-Phy before.
since ar8337 is behaving like ar8327
generally do the same thing
see: https://forum.openwrt.org/viewtopic.php?pid=214218#p214218
forward-ported to trunk
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
Patchwork: http://patchwork.openwrt.org/patch/4469/
[juhosg: merge chip_is_ar83[23]7 statements in ar8xxx_phy_config_init]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38952
Gabor Juhos [Fri, 29 Nov 2013 20:18:46 +0000 (20:18 +0000)]
generic: ar8216: remove trailing whitespaces
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38951
Gabor Juhos [Fri, 29 Nov 2013 20:18:45 +0000 (20:18 +0000)]
ar71xx: rssi leds for My Net WiFi Range Extender
The device has three extra LEDs which indicate the quality
of the wireless link. Thanks to rssileds, this feature now
works out of the box.
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Patchwork: http://patchwork.openwrt.org/patch/4462/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38950
Gabor Juhos [Fri, 29 Nov 2013 20:18:44 +0000 (20:18 +0000)]
ar71xx: improve support for the My Net Wi-Fi Range Extender device
This patch improves support for the device considerably.
1. The wifi didn't work in the initial release. This was because
the WMAC of the AR9340 is not connected to the antennas.
(However, it can pick up wifi signals, if they are strong enough!)
Instead there's a dedicated AR9300 chip on the same board, which
works.
2. Ethernet throughput is improved. iperf shows that the hardware
can sustain more than 200Mbit/s and no longer drops any packages
when the link is under load.
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Patchwork: http://patchwork.openwrt.org/patch/4461/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38949
Gabor Juhos [Fri, 29 Nov 2013 20:18:43 +0000 (20:18 +0000)]
ag71xx: add F1E specific feature bit definitions to AR934X register file
The F1E Phy (AR8035?) requires additional bits to be
set in order to provide a fast and reliable connection
over gigabit links.
When enabled, the link doesn't suffer anymore from a small
package loss under load and the performance is improved
quite a bit as well. (203 mbit/s vs 112 mbit/s, iperf tcp).
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Patchwork: http://patchwork.openwrt.org/patch/4460/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38948
Gabor Juhos [Fri, 29 Nov 2013 20:18:42 +0000 (20:18 +0000)]
ar71xx: user space support update tl-wr842n_v2 add default led support
Small update to uci_defaults/01_leds, to support the usb led
Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/4426/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38947
Gabor Juhos [Fri, 29 Nov 2013 20:18:40 +0000 (20:18 +0000)]
ar71xx: Kernel support update tl-wr842n_v2 added missing usb led
Just a small oversight my part, added the support for the USB led
Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com>
Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/4425/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38946
Imre Kaloz [Fri, 29 Nov 2013 10:59:51 +0000 (10:59 +0000)]
FPU type should not interfere with the ABI selection. Also make sure we either do real soft-float or hard-float on ARM, with the right options.
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38943
Imre Kaloz [Fri, 29 Nov 2013 10:58:40 +0000 (10:58 +0000)]
tunr on some additional features
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38942
Imre Kaloz [Fri, 29 Nov 2013 10:44:04 +0000 (10:44 +0000)]
ignore the fpu if we're doing soft-float
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38941
Imre Kaloz [Fri, 29 Nov 2013 10:25:43 +0000 (10:25 +0000)]
there's no such thing as a soft fpu, this target should be fine without these
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38940
Imre Kaloz [Fri, 29 Nov 2013 09:24:07 +0000 (09:24 +0000)]
enable using soft-float regardless of having a fpu
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38939
Jo-Philipp Wich [Thu, 28 Nov 2013 20:47:26 +0000 (20:47 +0000)]
ubox: fix handling of uci lists, prevent shell code injection from uci values (#14548)
SVN-Revision: 38938
Jo-Philipp Wich [Thu, 28 Nov 2013 11:33:49 +0000 (11:33 +0000)]
Revert "ubox: the validation code has problems with the "(" char. use string for now"
This reverts commit
f7c2ac3ea9b5f2dc4ef4ce4ef195de8a4ac5546b.
SVN-Revision: 38937
Jo-Philipp Wich [Thu, 28 Nov 2013 11:28:40 +0000 (11:28 +0000)]
busybox: do not abort sysntpd init if enable_server is unset, that variable just controls the server part for relaying NTP
SVN-Revision: 38936
Jo-Philipp Wich [Thu, 28 Nov 2013 11:26:34 +0000 (11:26 +0000)]
procd: fix processing of datatype specification with spaces
SVN-Revision: 38935
Imre Kaloz [Wed, 27 Nov 2013 12:51:35 +0000 (12:51 +0000)]
initialize wl12xx from the device tree
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38934
Imre Kaloz [Wed, 27 Nov 2013 12:40:07 +0000 (12:40 +0000)]
add device tree based initialization to wl12xx
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38933
Imre Kaloz [Wed, 27 Nov 2013 12:34:41 +0000 (12:34 +0000)]
refresh/rename patches
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38932
Imre Kaloz [Wed, 27 Nov 2013 12:33:06 +0000 (12:33 +0000)]
fix gpio interrupt-cells property on AM335x
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38931
Imre Kaloz [Wed, 27 Nov 2013 12:31:05 +0000 (12:31 +0000)]
refresh patch
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38930
Imre Kaloz [Wed, 27 Nov 2013 12:29:13 +0000 (12:29 +0000)]
make the wl12xx glue code available with compat-wireless, too
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38929
Imre Kaloz [Wed, 27 Nov 2013 12:25:20 +0000 (12:25 +0000)]
add TI wireless symbols and enable the platform glue by default
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38928
Felix Fietkau [Wed, 27 Nov 2013 12:08:38 +0000 (12:08 +0000)]
mac80211: include 802.11n support when wl12xx is selected
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38927
Felix Fietkau [Wed, 27 Nov 2013 10:56:05 +0000 (10:56 +0000)]
ath9k: merge initval updates
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38926
Imre Kaloz [Wed, 27 Nov 2013 09:02:17 +0000 (09:02 +0000)]
fix typo in wl128x firmware names
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38925
Imre Kaloz [Tue, 26 Nov 2013 18:46:47 +0000 (18:46 +0000)]
hide package, it's needed all the time
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38924
Imre Kaloz [Tue, 26 Nov 2013 18:45:51 +0000 (18:45 +0000)]
use plain image names inside the target directories
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38923
Imre Kaloz [Tue, 26 Nov 2013 18:42:32 +0000 (18:42 +0000)]
upgrade Linaro GCC 4.8 to 4.8-2013.11
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38922
Imre Kaloz [Tue, 26 Nov 2013 17:46:45 +0000 (17:46 +0000)]
wl12xx could need the wl128x firmware files, too
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38921
Felix Fietkau [Tue, 26 Nov 2013 11:25:31 +0000 (11:25 +0000)]
mac80211: merge another round of upstream fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38918
John Crispin [Tue, 26 Nov 2013 09:51:57 +0000 (09:51 +0000)]
ralink: dts fixes
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38917
John Crispin [Tue, 26 Nov 2013 07:50:05 +0000 (07:50 +0000)]
ubox: the validation code has problems with the "(" char. use string for now
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38916
Felix Fietkau [Mon, 25 Nov 2013 15:43:30 +0000 (15:43 +0000)]
hostapd: add support for auto-channel selection
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38915
Felix Fietkau [Mon, 25 Nov 2013 15:43:15 +0000 (15:43 +0000)]
hostapd: update to version 2013-11-20
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38914
John Crispin [Mon, 25 Nov 2013 14:09:48 +0000 (14:09 +0000)]
kernel/modules: snd-pcm-dmaengine only if CONFIG_SND_DMAENGINE_PCM is set
Platforms without in-soc audio don't provide CONFIG_SND_DMAENGINE_PCM, thus
the module is not generated.
SVN-Revision: 38913
John Crispin [Mon, 25 Nov 2013 14:09:24 +0000 (14:09 +0000)]
tools/mpfr: add GNU source
fixes https://dev.openwrt.org/ticket/14519
mpfr is available from GNU too
see: https://gforge.inria.fr/forum/forum.php?forum_id=11263
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 38912
John Crispin [Mon, 25 Nov 2013 14:09:16 +0000 (14:09 +0000)]
pppd: Place plugin-specific options after `plugin name`.
Before this patch, if we specify a plugin specific option through
`pppd_options` in /etc/config/network, e.g. `rp_pppoe_verbose 1`, pppd
would quit with the following error in log.
Wed Oct 9 09:42:58 2013 daemon.notice netifd: GORG (1689): /usr/sbin/pppd: unrecognized option 'rp_pppoe_verbose'
Wed Oct 9 09:42:58 2013 daemon.err pppd[1689]: unrecognized option 'rp_pppoe_verbose'
Wed Oct 9 09:42:58 2013 daemon.notice netifd: GORG (1689): pppd version 2.4.5
Wed Oct 9 09:42:58 2013 daemon.notice netifd: GORG (1689): Usage: /usr/sbin/pppd [ options ], where options are:
This is due to the requirement that function add_option() should be
called by the plugin_init() function first before pppd can parse those
options.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 38911
John Crispin [Mon, 25 Nov 2013 14:09:08 +0000 (14:09 +0000)]
ralink: add mac address detection for Asus RT-G32 b1
http://patchwork.openwrt.org/patch/4463/
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38910
John Crispin [Mon, 25 Nov 2013 08:34:55 +0000 (08:34 +0000)]
base-files: allow users to delect debug level during boot
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38909
John Crispin [Mon, 25 Nov 2013 08:34:47 +0000 (08:34 +0000)]
procd: update procd.sh to make use of the new validate_data tool
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38908
John Crispin [Mon, 25 Nov 2013 08:34:39 +0000 (08:34 +0000)]
ubox: update the validate_data tool
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38907
John Crispin [Mon, 25 Nov 2013 08:34:31 +0000 (08:34 +0000)]
ubox: fix typo that caused log_file to not be validated properly
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38906
John Crispin [Mon, 25 Nov 2013 08:34:23 +0000 (08:34 +0000)]
ralink: fix up the mt7530 driver to work properly with gmac2
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38905
John Crispin [Mon, 25 Nov 2013 08:34:12 +0000 (08:34 +0000)]
ralink: add LRO support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38904
John Crispin [Mon, 25 Nov 2013 08:34:01 +0000 (08:34 +0000)]
ralink: add NETIF_F_HW_VLAN_CTAG_TX support for the mt7620X family
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38903
John Crispin [Mon, 25 Nov 2013 08:33:42 +0000 (08:33 +0000)]
ralink: set the mac addr via the dts file
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38902
Luka Perkov [Sun, 24 Nov 2013 23:07:34 +0000 (23:07 +0000)]
kirkwood: include ext4 support by default
Several users reported that they would like this feature.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38901
Luka Perkov [Sun, 24 Nov 2013 17:53:34 +0000 (17:53 +0000)]
kirkwood: kernel: add missing config option
Buildbot found missing config option for target kirkwood.
Signed-off-by: Jiri Slachta <slachta@cesnet.cz>
SVN-Revision: 38900
Luka Perkov [Sun, 24 Nov 2013 07:10:21 +0000 (07:10 +0000)]
cmake: upgrade to 2.8.12.1
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38899
Luka Perkov [Sat, 23 Nov 2013 15:55:12 +0000 (15:55 +0000)]
kirkwood: drop unnecessary argument from *_UBIFS_OPTS variables
The '-U' aka '--squash-uids' is already used in Image/mkfs/ubifs function.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38898
Luka Perkov [Sat, 23 Nov 2013 15:55:10 +0000 (15:55 +0000)]
kirkwood: add support for iomega iconnect
Signed-off-by: Luka Perkov <luka@openwrt.org>
Signed-off-by: Daniel Engberg <daniel.engberg@pyret.net>
SVN-Revision: 38897
Imre Kaloz [Fri, 22 Nov 2013 14:39:53 +0000 (14:39 +0000)]
For now vdi and vmdk images should be x86 only
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38896
Imre Kaloz [Fri, 22 Nov 2013 14:30:40 +0000 (14:30 +0000)]
move menuconfig options into separate files
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38895
Imre Kaloz [Fri, 22 Nov 2013 13:41:55 +0000 (13:41 +0000)]
drop stupid defaults
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38894
Imre Kaloz [Fri, 22 Nov 2013 12:01:01 +0000 (12:01 +0000)]
add a feature flag for device tree support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38893
Imre Kaloz [Fri, 22 Nov 2013 09:54:36 +0000 (09:54 +0000)]
VMWare and VirtualBox images should select what they need, not depend on it..
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38892
Imre Kaloz [Fri, 22 Nov 2013 09:44:14 +0000 (09:44 +0000)]
rationalize target image options
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38891
Imre Kaloz [Fri, 22 Nov 2013 09:39:41 +0000 (09:39 +0000)]
allow configuration of the target directory for binaries
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38890
Imre Kaloz [Fri, 22 Nov 2013 09:22:54 +0000 (09:22 +0000)]
replace the mips64 fixes patch with an upstream commit
The current one broke all other 64 bit targets.. DOH!
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38889
Felix Fietkau [Thu, 21 Nov 2013 21:52:24 +0000 (21:52 +0000)]
uhttpd: update to the latest version, fixes crashes in the ubus plugin
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38888
Luka Perkov [Wed, 20 Nov 2013 22:09:11 +0000 (22:09 +0000)]
pkg-config: fix occasional install problem
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38886
John Crispin [Wed, 20 Nov 2013 19:28:51 +0000 (19:28 +0000)]
procd: fix the running hook #38868
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38885
John Crispin [Wed, 20 Nov 2013 17:53:36 +0000 (17:53 +0000)]
lantiq: move patch to proper folder
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38884
Felix Fietkau [Wed, 20 Nov 2013 17:33:50 +0000 (17:33 +0000)]
mac80211: fix reorder issues with multicast packets (client mode)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38883
Felix Fietkau [Wed, 20 Nov 2013 17:33:46 +0000 (17:33 +0000)]
mac80211: fix an overflow issue in minstrel_ht
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38882
John Crispin [Wed, 20 Nov 2013 16:56:58 +0000 (16:56 +0000)]
lantiq: update default mii modes
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38881
John Crispin [Wed, 20 Nov 2013 16:56:50 +0000 (16:56 +0000)]
lantiq: fix etop registers
As first reported more than a year ago
(https://lists.openwrt.org/pipermail/openwrt-devel/2012-August/016240.html
and
https://lists.openwrt.org/pipermail/openwrt-devel/2012-August/016241.html),
some of the register definitions of the lantiq etop driver are
incorrect. When OpenWrt is booted with a bootloader which doesn't do
proper network initialization of its own (e.g. brnboot), ethernet won't
work. The patch below changes the register names and addresses to match
the lantiq etop driver included with the recent U-Boot.
At the moment the MII/RMII setting in the lantiq .dts-files has no
effect, since wrong registers are written. Once this patch is applied,
it is necessary to make sure that the MII/RMII setting in the .dts-file
is correct.
v2: fix mangled whitespaces
Signed-off-by: Matti Laakso <malaakso@elisanet.fi>
SVN-Revision: 38880
John Crispin [Wed, 20 Nov 2013 16:56:41 +0000 (16:56 +0000)]
procd: add validation to the log init script
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38879
John Crispin [Wed, 20 Nov 2013 16:56:32 +0000 (16:56 +0000)]
lantiq: fix an endless loop in the vmmc platform code
this was caused by not honoured error return codes of of_gpio_count()
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38878
Zoltan Herpai [Wed, 20 Nov 2013 10:23:49 +0000 (10:23 +0000)]
mxs: build/profile-related changes - change uImage creation to use zImage - update image Makefile for further boards with u-boot support - add profile for OLinuXino Micro/Nano boards
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 38876
Zoltan Herpai [Wed, 20 Nov 2013 10:15:02 +0000 (10:15 +0000)]
package: uboot-mxs: cosmetic fix
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 38875
Felix Fietkau [Wed, 20 Nov 2013 07:33:27 +0000 (07:33 +0000)]
mac80211: small rate control fix
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38874
John Crispin [Tue, 19 Nov 2013 21:54:51 +0000 (21:54 +0000)]
libubox: fix compile error (#14497)
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38873
John Crispin [Tue, 19 Nov 2013 21:13:24 +0000 (21:13 +0000)]
ralink: set wmr-300 mac properly
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38872
John Crispin [Tue, 19 Nov 2013 20:56:23 +0000 (20:56 +0000)]
mtd: add a "mtd verify" call
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38871
John Crispin [Tue, 19 Nov 2013 20:56:11 +0000 (20:56 +0000)]
libubox: ubox: procd: move md5.{c,h} to libubox
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38870
John Crispin [Tue, 19 Nov 2013 16:33:50 +0000 (16:33 +0000)]
procd: update to latest git head
* fix up the order of respawn parameters for ubus
* add a event broadcast function
* add debug level handover between preinit and main process
* make the service running trigger be queued directly after the service was startetd
* Allow process respawning forever
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38868
John Crispin [Tue, 19 Nov 2013 16:33:43 +0000 (16:33 +0000)]
ralink: add missing CONFIG_ symbol to mt7620n
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38867
John Crispin [Tue, 19 Nov 2013 16:31:47 +0000 (16:31 +0000)]
libubox: update to latest git head
add a renqueue_add_first() api
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38866
Felix Fietkau [Tue, 19 Nov 2013 13:00:37 +0000 (13:00 +0000)]
mpc85xx: Fix NAPI poll mechanism in GIANFAR ethernet driver
This patch fixes the NAPI poll mechanism in the GIANFAR ethernet driver, which
was not properly working since Linus Kernel Version 3,8.
Therefore the workaround patch to downgrade the GIANFAR ethernet driver to
Kernelversion v3.8 is obsoete.
This patch was extensivly testes with different network loads and types of
traffic. There is quite a substantial user base that reports proper Ethernet
function with TPlink-4900. This patch is based on the fixes from GINAFAR
maintainer Claudiu Manoli.
Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38865
Felix Fietkau [Tue, 19 Nov 2013 00:03:42 +0000 (00:03 +0000)]
procd: emit tty events for ttyUSB* even when they come from the usb-serial subsystem
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38862
Felix Fietkau [Tue, 19 Nov 2013 00:03:39 +0000 (00:03 +0000)]
base-files: add the DEVICENAME variable for hotplug scripts
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38861
Felix Fietkau [Tue, 19 Nov 2013 00:03:34 +0000 (00:03 +0000)]
scripts/gen-dependencies.sh: prevent zero-length dep.* files from accumulating in tmp/
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38860
Luka Perkov [Mon, 18 Nov 2013 22:23:43 +0000 (22:23 +0000)]
imx6: build images for ventana boards that are supported
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38859
Luka Perkov [Mon, 18 Nov 2013 22:23:42 +0000 (22:23 +0000)]
imx6: merge all gateworks boards into one profile
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38858
Luka Perkov [Mon, 18 Nov 2013 22:23:40 +0000 (22:23 +0000)]
imx6: add support for more then one nand type per profile
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38857
Luka Perkov [Mon, 18 Nov 2013 22:23:39 +0000 (22:23 +0000)]
imx6: refresh kernel config
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38856
Luka Perkov [Mon, 18 Nov 2013 22:23:38 +0000 (22:23 +0000)]
image: remove spaces from toupper function
The extra prefix space is passed to the caller.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38855
Felix Fietkau [Mon, 18 Nov 2013 19:58:53 +0000 (19:58 +0000)]
ath9k: merge a few reset / calibration fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38854
Felix Fietkau [Mon, 18 Nov 2013 14:10:12 +0000 (14:10 +0000)]
cmake.mk: fix support for ccache
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38853
Felix Fietkau [Mon, 18 Nov 2013 13:54:26 +0000 (13:54 +0000)]
hostapd: remove random pool support - the entropy it gathers is questionable and we have better entropy sources on common platforms now
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38852
Felix Fietkau [Mon, 18 Nov 2013 13:32:06 +0000 (13:32 +0000)]
uClibc: Deactivate oversized thread stack cache
A small system like the common home router doesn't have 40 MiB per process for
a dirty stack cache. This can easily lead to an overbooking OOM problem and
caused a lot of hangs+reboots on 32 MiB systems running nodogsplash.
Not using a stack cache can increase the time to spawn new threads. This is
hopefully no problem for system not running a lot of parallel computations.
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 38851
Imre Kaloz [Mon, 18 Nov 2013 12:05:11 +0000 (12:05 +0000)]
make default packages selected for real
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38850
Jo-Philipp Wich [Mon, 18 Nov 2013 11:59:27 +0000 (11:59 +0000)]
firewall: optimize DNAT rules and skip invalid rules and redirects (#14485)
- instead of writing one (or more) ACCEPT rules in the filter table
for each redirect install a global ctstate DNAT accept rule per zone
- discard rules and redirects which have invalid options set instead
of silently skipping the invalid values
SVN-Revision: 38849
John Crispin [Mon, 18 Nov 2013 09:35:41 +0000 (09:35 +0000)]
ralink: add support for ralink mt7620 nand eval board
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38848
John Crispin [Mon, 18 Nov 2013 09:35:32 +0000 (09:35 +0000)]
ralink: improve mt7620n detection
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38847
John Crispin [Mon, 18 Nov 2013 09:35:23 +0000 (09:35 +0000)]
ralink: add mt7620 nand driver
This is a minor rework of the SDK driver. This driver needs a full rewrite.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38846
John Crispin [Mon, 18 Nov 2013 09:35:14 +0000 (09:35 +0000)]
ralink: make all none 3x5x boards default to a vlan1/2 setup
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38845
John Crispin [Mon, 18 Nov 2013 09:34:46 +0000 (09:34 +0000)]
ralink: make usb work on the mt7530 eval kit
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38844
projects / openwrt / staging / rmilecki.git / log