Peter Zijlstra [Fri, 8 Dec 2017 12:49:39 +0000 (13:49 +0100)]
futex: Avoid violating the 10th rule of futex
Julia reported futex state corruption in the following scenario:
waiter waker stealer (prio > waiter)
futex(WAIT_REQUEUE_PI, uaddr, uaddr2,
timeout=[N ms])
futex_wait_requeue_pi()
futex_wait_queue_me()
freezable_schedule()
<scheduled out>
futex(LOCK_PI, uaddr2)
futex(CMP_REQUEUE_PI, uaddr,
uaddr2, 1, 0)
/* requeues waiter to uaddr2 */
futex(UNLOCK_PI, uaddr2)
wake_futex_pi()
cmp_futex_value_locked(uaddr2, waiter)
wake_up_q()
<woken by waker>
<hrtimer_wakeup() fires,
clears sleeper->task>
futex(LOCK_PI, uaddr2)
__rt_mutex_start_proxy_lock()
try_to_take_rt_mutex() /* steals lock */
rt_mutex_set_owner(lock, stealer)
<preempted>
<scheduled in>
rt_mutex_wait_proxy_lock()
__rt_mutex_slowlock()
try_to_take_rt_mutex() /* fails, lock held by stealer */
if (timeout && !timeout->task)
return -ETIMEDOUT;
fixup_owner()
/* lock wasn't acquired, so,
fixup_pi_state_owner skipped */
return -ETIMEDOUT;
/* At this point, we've returned -ETIMEDOUT to userspace, but the
* futex word shows waiter to be the owner, and the pi_mutex has
* stealer as the owner */
futex_lock(LOCK_PI, uaddr2)
-> bails with EDEADLK, futex word says we're owner.
And suggested that what commit:
73d786bd043e ("futex: Rework inconsistent rt_mutex/futex_q state")
removes from fixup_owner() looks to be just what is needed. And indeed
it is -- I completely missed that requeue_pi could also result in this
case. So we need to restore that, except that subsequent patches, like
commit:
16ffa12d7425 ("futex: Pull rt_mutex_futex_unlock() out from under hb->lock")
changed all the locking rules. Even without that, the sequence:
- if (rt_mutex_futex_trylock(&q->pi_state->pi_mutex)) {
- locked = 1;
- goto out;
- }
- raw_spin_lock_irq(&q->pi_state->pi_mutex.wait_lock);
- owner = rt_mutex_owner(&q->pi_state->pi_mutex);
- if (!owner)
- owner = rt_mutex_next_owner(&q->pi_state->pi_mutex);
- raw_spin_unlock_irq(&q->pi_state->pi_mutex.wait_lock);
- ret = fixup_pi_state_owner(uaddr, q, owner);
already suggests there were races; otherwise we'd never have to look
at next_owner.
So instead of doing 3 consecutive wait_lock sections with who knows
what races, we do it all in a single section. Additionally, the usage
of pi_state->owner in fixup_owner() was only safe because only the
rt_mutex owner would modify it, which this additional case wrecks.
Luckily the values can only change away and not to the value we're
testing, this means we can do a speculative test and double check once
we have the wait_lock.
Fixes: 73d786bd043e ("futex: Rework inconsistent rt_mutex/futex_q state")
Reported-by: Julia Cartwright <julia@ni.com>
Reported-by: Gratian Crisan <gratian.crisan@ni.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Julia Cartwright <julia@ni.com>
Tested-by: Gratian Crisan <gratian.crisan@ni.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20171208124939.7livp7no2ov65rrc@hirez.programming.kicks-ass.net
Linus Torvalds [Fri, 12 Jan 2018 18:32:11 +0000 (10:32 -0800)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Two pending (non-PTI) x86 fixes:
- an Intel-MID crash fix
- and an Intel microcode loader blacklist quirk to avoid a
problematic revision"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/platform/intel-mid: Revert "Make 'bt_sfi_data' const"
x86/microcode/intel: Extend BDW late-loading with a revision check
Linus Torvalds [Fri, 12 Jan 2018 18:23:59 +0000 (10:23 -0800)]
Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"A Kconfig fix, a build fix and a membarrier bug fix"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
membarrier: Disable preemption when calling smp_call_function_many()
sched/isolation: Make CONFIG_CPU_ISOLATION=y depend on SMP or COMPILE_TEST
ia64, sched/cputime: Fix build error if CONFIG_VIRT_CPU_ACCOUNTING_NATIVE=y
Linus Torvalds [Fri, 12 Jan 2018 18:14:09 +0000 (10:14 -0800)]
Merge branch 'locking-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull locking fixes from Ingo Molnar:
"No functional effects intended: removes leftovers from recent lockdep
and refcounts work"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/refcounts: Remove stale comment from the ARCH_HAS_REFCOUNT Kconfig entry
locking/lockdep: Remove cross-release leftovers
locking/Documentation: Remove stale crossrelease_fullstack parameter
Linus Torvalds [Fri, 12 Jan 2018 18:00:15 +0000 (10:00 -0800)]
Merge tag 'for-linus-4.15-rc8-tag' of git://git./linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"This contains two build fixes for clang and two fixes for rather
unlikely situations in the Xen gntdev driver"
* tag 'for-linus-4.15-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/gntdev: Fix partial gntdev_mmap() cleanup
xen/gntdev: Fix off-by-one error when unmapping with holes
x86: xen: remove the use of VLAIS
x86/xen/time: fix section mismatch for xen_init_time_ops()
Linus Torvalds [Fri, 12 Jan 2018 17:56:52 +0000 (09:56 -0800)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"PPC:
- user-triggerable use-after-free in HPT resizing
- stale TLB entries in the guest
- trap-and-emulate (PR) KVM guests failing to start under pHyp
x86:
- Another "Spectre" fix.
- async pagefault fix
- Revert an old fix for x86 nested virtualization, which turned out
to do more harm than good
- Check shrinker registration return code, to avoid warnings from
upcoming 4.16 -mm patches"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Add memory barrier on vmcs field lookup
KVM: x86: emulate #UD while in guest mode
x86: kvm: propagate register_shrinker return code
KVM MMU: check pending exception before injecting APF
KVM: PPC: Book3S HV: Always flush TLB in kvmppc_alloc_reset_hpt()
KVM: PPC: Book3S PR: Fix WIMG handling under pHyp
KVM: PPC: Book3S HV: Fix use after free in case of multiple resize requests
KVM: PPC: Book3S HV: Drop prepare_done from struct kvm_resize_hpt
Linus Torvalds [Fri, 12 Jan 2018 17:47:58 +0000 (09:47 -0800)]
Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"This fixes a NULL pointer dereference in crypto_remove_spawns that can
be triggered through af_alg"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: algapi - fix NULL dereference in crypto_remove_spawns()
Linus Torvalds [Fri, 12 Jan 2018 17:34:20 +0000 (09:34 -0800)]
Merge tag 'mmc-v4.15-rc2-2' of git://git./linux/kernel/git/ulfh/mmc
Pull MMC host fixes from Ulf Hansson:
- s3mci: mark debug_regs[] as static
- renesas_sdhi: Add MODULE_LICENSE
* tag 'mmc-v4.15-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: s3mci: mark debug_regs[] as static
mmc: renesas_sdhi: Add MODULE_LICENSE
Linus Torvalds [Fri, 12 Jan 2018 17:28:28 +0000 (09:28 -0800)]
Merge tag 'drm-fixes-for-v4.15-rc8' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
- Nouveau: regression fix
- Tegra: regression fix
- vmwgfx: crasher + freed data leak
- i915: KASAN use after free fix, whitelist register to avoid hang fix,
GVT fixes
- vc4: irq/pm fix
* tag 'drm-fixes-for-v4.15-rc8' of git://people.freedesktop.org/~airlied/linux:
drm/i915: Don't adjust priority on an already signaled fence
drm/i915: Whitelist SLICE_COMMON_ECO_CHICKEN1 on Geminilake.
drm/vmwgfx: Potential off by one in vmw_view_add()
drm/tegra: sor: Fix hang on Tegra124 eDP
drm/vmwgfx: Don't cache framebuffer maps
drm/nouveau/disp/gf119: add missing drive vfunc ptr
drm/i915/gvt: Fix stack-out-of-bounds bug in cmd parser
drm/i915/gvt: Clear the shadow page table entry after post-sync
drm/vc4: Move IRQ enable to PM path
Dave Airlie [Fri, 12 Jan 2018 01:48:06 +0000 (11:48 +1000)]
Merge tag 'drm-intel-fixes-2018-01-11-1' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
Hopefully final drm/i915 fixes for v4.15:
- Fix a KASAN reported use after free
- Whitelist a register to avoid hangs
- GVT fixes
* tag 'drm-intel-fixes-2018-01-11-1' of git://anongit.freedesktop.org/drm/drm-intel:
drm/i915: Don't adjust priority on an already signaled fence
drm/i915: Whitelist SLICE_COMMON_ECO_CHICKEN1 on Geminilake.
drm/i915/gvt: Fix stack-out-of-bounds bug in cmd parser
drm/i915/gvt: Clear the shadow page table entry after post-sync
Dave Airlie [Fri, 12 Jan 2018 01:47:40 +0000 (11:47 +1000)]
Merge branch 'vmwgfx-fixes-4.15' of git://people.freedesktop.org/~thomash/linux into drm-fixes
Two important fixes for vmwgfx.
The off-by-one fix could cause a malicious user to potentially crash the
kernel.
The framebuffer map cache fix can under some circumstances enable a user to
read from or write to freed pages.
* 'vmwgfx-fixes-4.15' of git://people.freedesktop.org/~thomash/linux:
drm/vmwgfx: Potential off by one in vmw_view_add()
drm/vmwgfx: Don't cache framebuffer maps
Dave Airlie [Fri, 12 Jan 2018 01:47:11 +0000 (11:47 +1000)]
Merge tag 'drm/tegra/for-4.15-rc8' of git://anongit.freedesktop.org/tegra/linux into drm-fixes
drm/tegra: Fixes for v4.15-rc8
A single fix for a Tegra124 eDP regression introduced by the SOR changes
in v4.15-rc1.
* tag 'drm/tegra/for-4.15-rc8' of git://anongit.freedesktop.org/tegra/linux:
drm/tegra: sor: Fix hang on Tegra124 eDP
Linus Torvalds [Fri, 12 Jan 2018 00:57:32 +0000 (16:57 -0800)]
Merge tag 'ceph-for-4.15-rc8' of git://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"Two rbd fixes for 4.12 and 4.2 issues respectively, marked for
stable"
* tag 'ceph-for-4.15-rc8' of git://github.com/ceph/ceph-client:
rbd: set max_segments to USHRT_MAX
rbd: reacquire lock should update lock owner client id
Linus Torvalds [Fri, 12 Jan 2018 00:54:35 +0000 (16:54 -0800)]
Merge tag 'gpio-v4.15-4' of git://git./linux/kernel/git/linusw/linux-gpio
Pull GPIO fix from Linus Walleij:
"Fix a raw vs elaborate GPIO descriptor bug introduced by yours truly"
* tag 'gpio-v4.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: Add missing open drain/source handling to gpiod_set_value_cansleep()
Paolo Bonzini [Thu, 11 Jan 2018 17:20:48 +0000 (18:20 +0100)]
Merge branch 'kvm-insert-lfence' into kvm-master
Topic branch for CVE-2017-5753, avoiding conflicts in the next merge window.
Andrew Honig [Wed, 10 Jan 2018 18:12:03 +0000 (10:12 -0800)]
KVM: x86: Add memory barrier on vmcs field lookup
This adds a memory barrier when performing a lookup into
the vmcs_field_to_offset_table. This is related to
CVE-2017-5753.
Signed-off-by: Andrew Honig <ahonig@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Thu, 11 Jan 2018 15:55:24 +0000 (16:55 +0100)]
KVM: x86: emulate #UD while in guest mode
This reverts commits
ae1f57670703656cc9f293722c3b8b6782f8ab3f
and
ac9b305caa0df6f5b75d294e4b86c1027648991e.
If the hardware doesn't support MOVBE, but L0 sets CPUID.01H:ECX.MOVBE
in L1's emulated CPUID information, then L1 is likely to pass that
CPUID bit through to L2. L2 will expect MOVBE to work, but if L1
doesn't intercept #UD, then any MOVBE instruction executed in L2 will
raise #UD, and the exception will be delivered in L2.
Commit
ac9b305caa0df6f5b75d294e4b86c1027648991e is a better and more
complete version of
ae1f57670703 ("KVM: nVMX: Do not emulate #UD while
in guest mode"); however, neither considers the above case.
Suggested-by: Jim Mattson <jmattson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Arnd Bergmann [Wed, 10 Jan 2018 16:26:59 +0000 (17:26 +0100)]
x86: kvm: propagate register_shrinker return code
Patch "mm,vmscan: mark register_shrinker() as __must_check" is
queued for 4.16 in linux-mm and adds a warning about the unchecked
call to register_shrinker:
arch/x86/kvm/mmu.c:5485:2: warning: ignoring return value of 'register_shrinker', declared with attribute warn_unused_result [-Wunused-result]
This changes the kvm_mmu_module_init() function to fail itself
when the call to register_shrinker fails.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Thu, 11 Jan 2018 13:07:27 +0000 (14:07 +0100)]
Merge tag 'kvm-ppc-fixes-4.15-3' of git://git./linux/kernel/git/paulus/powerpc into kvm-master
PPC KVM fixes for 4.15
Four commits here, including two that were tagged but never merged.
Three of them are for the HPT resizing code; two of those fix a
user-triggerable use-after-free in the host, and one that fixes
stale TLB entries in the guest. The remaining commit fixes a bug
causing PR KVM guests under PowerVM to fail to start.
Haozhong Zhang [Wed, 10 Jan 2018 13:44:42 +0000 (21:44 +0800)]
KVM MMU: check pending exception before injecting APF
For example, when two APF's for page ready happen after one exit and
the first one becomes pending, the second one will result in #DF.
Instead, just handle the second page fault synchronously.
Reported-by: Ross Zwisler <zwisler@gmail.com>
Message-ID: <CAOxpaSUBf8QoOZQ1p4KfUp0jq76OKfGY4Uxs-Gg8ngReD99xww@mail.gmail.com>
Reported-by: Alec Blayne <ab@tevsa.net>
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Chris Wilson [Sat, 6 Jan 2018 10:56:18 +0000 (10:56 +0000)]
drm/i915: Don't adjust priority on an already signaled fence
When we retire a signaled fence, we free the dependency tree. However,
we skip clearing the list so that if we then try to adjust the priority
of the signaled fence, we may walk the list of freed dependencies.
[ 3083.156757] ==================================================================
[ 3083.156806] BUG: KASAN: use-after-free in execlists_schedule+0x199/0x660 [i915]
[ 3083.156810] Read of size 8 at addr
ffff8806bf20f400 by task Xorg/831
[ 3083.156815] CPU: 0 PID: 831 Comm: Xorg Not tainted 4.15.0-rc6-no-psn+ #1
[ 3083.156817] Hardware name: Notebook N24_25BU/N24_25BU, BIOS 5.12 02/17/2017
[ 3083.156818] Call Trace:
[ 3083.156823] dump_stack+0x5c/0x7a
[ 3083.156827] print_address_description+0x6b/0x290
[ 3083.156830] kasan_report+0x28f/0x380
[ 3083.156872] ? execlists_schedule+0x199/0x660 [i915]
[ 3083.156914] execlists_schedule+0x199/0x660 [i915]
[ 3083.156956] ? intel_crtc_atomic_check+0x146/0x4e0 [i915]
[ 3083.156997] ? execlists_submit_request+0xe0/0xe0 [i915]
[ 3083.157038] ? i915_vma_misplaced.part.4+0x25/0xb0 [i915]
[ 3083.157079] ? __i915_vma_do_pin+0x7c8/0xc80 [i915]
[ 3083.157121] ? intel_atomic_state_alloc+0x44/0x60 [i915]
[ 3083.157130] ? drm_atomic_helper_page_flip+0x3e/0xb0 [drm_kms_helper]
[ 3083.157145] ? drm_mode_page_flip_ioctl+0x7d2/0x850 [drm]
[ 3083.157159] ? drm_ioctl_kernel+0xa7/0xf0 [drm]
[ 3083.157172] ? drm_ioctl+0x45b/0x560 [drm]
[ 3083.157211] i915_gem_object_wait_priority+0x14c/0x2c0 [i915]
[ 3083.157251] ? i915_gem_get_aperture_ioctl+0x150/0x150 [i915]
[ 3083.157290] ? i915_vma_pin_fence+0x1d8/0x320 [i915]
[ 3083.157331] ? intel_pin_and_fence_fb_obj+0x175/0x250 [i915]
[ 3083.157372] ? intel_rotation_info_size+0x60/0x60 [i915]
[ 3083.157413] ? intel_link_compute_m_n+0x80/0x80 [i915]
[ 3083.157428] ? drm_dev_printk+0x1b0/0x1b0 [drm]
[ 3083.157443] ? drm_dev_printk+0x1b0/0x1b0 [drm]
[ 3083.157485] intel_prepare_plane_fb+0x2f8/0x5a0 [i915]
[ 3083.157527] ? intel_crtc_get_vblank_counter+0x80/0x80 [i915]
[ 3083.157536] drm_atomic_helper_prepare_planes+0xa0/0x1c0 [drm_kms_helper]
[ 3083.157587] intel_atomic_commit+0x12e/0x4e0 [i915]
[ 3083.157605] drm_atomic_helper_page_flip+0xa2/0xb0 [drm_kms_helper]
[ 3083.157621] drm_mode_page_flip_ioctl+0x7d2/0x850 [drm]
[ 3083.157638] ? drm_mode_cursor2_ioctl+0x10/0x10 [drm]
[ 3083.157652] ? drm_lease_owner+0x1a/0x30 [drm]
[ 3083.157668] ? drm_mode_cursor2_ioctl+0x10/0x10 [drm]
[ 3083.157681] drm_ioctl_kernel+0xa7/0xf0 [drm]
[ 3083.157696] drm_ioctl+0x45b/0x560 [drm]
[ 3083.157711] ? drm_mode_cursor2_ioctl+0x10/0x10 [drm]
[ 3083.157725] ? drm_getstats+0x20/0x20 [drm]
[ 3083.157729] ? timerqueue_del+0x49/0x80
[ 3083.157732] ? __remove_hrtimer+0x62/0xb0
[ 3083.157735] ? hrtimer_try_to_cancel+0x173/0x210
[ 3083.157738] do_vfs_ioctl+0x13b/0x880
[ 3083.157741] ? ioctl_preallocate+0x140/0x140
[ 3083.157744] ? _raw_spin_unlock_irq+0xe/0x30
[ 3083.157746] ? do_setitimer+0x234/0x370
[ 3083.157750] ? SyS_setitimer+0x19e/0x1b0
[ 3083.157752] ? SyS_alarm+0x140/0x140
[ 3083.157755] ? __rcu_read_unlock+0x66/0x80
[ 3083.157757] ? __fget+0xc4/0x100
[ 3083.157760] SyS_ioctl+0x74/0x80
[ 3083.157763] entry_SYSCALL_64_fastpath+0x1a/0x7d
[ 3083.157765] RIP: 0033:0x7f6135d0c6a7
[ 3083.157767] RSP: 002b:
00007fff01451888 EFLAGS:
00003246 ORIG_RAX:
0000000000000010
[ 3083.157769] RAX:
ffffffffffffffda RBX:
0000000000000004 RCX:
00007f6135d0c6a7
[ 3083.157771] RDX:
00007fff01451950 RSI:
00000000c01864b0 RDI:
000000000000000c
[ 3083.157772] RBP:
00007f613076f600 R08:
0000000000000001 R09:
0000000000000000
[ 3083.157773] R10:
0000000000000060 R11:
0000000000003246 R12:
0000000000000000
[ 3083.157774] R13:
0000000000000060 R14:
000000000000001b R15:
0000000000000060
[ 3083.157779] Allocated by task 831:
[ 3083.157783] kmem_cache_alloc+0xc0/0x200
[ 3083.157822] i915_gem_request_await_dma_fence+0x2c4/0x5d0 [i915]
[ 3083.157861] i915_gem_request_await_object+0x321/0x370 [i915]
[ 3083.157900] i915_gem_do_execbuffer+0x1165/0x19c0 [i915]
[ 3083.157937] i915_gem_execbuffer2+0x1ad/0x550 [i915]
[ 3083.157950] drm_ioctl_kernel+0xa7/0xf0 [drm]
[ 3083.157962] drm_ioctl+0x45b/0x560 [drm]
[ 3083.157964] do_vfs_ioctl+0x13b/0x880
[ 3083.157966] SyS_ioctl+0x74/0x80
[ 3083.157968] entry_SYSCALL_64_fastpath+0x1a/0x7d
[ 3083.157971] Freed by task 831:
[ 3083.157973] kmem_cache_free+0x77/0x220
[ 3083.158012] i915_gem_request_retire+0x72c/0xa70 [i915]
[ 3083.158051] i915_gem_request_alloc+0x1e9/0x8b0 [i915]
[ 3083.158089] i915_gem_do_execbuffer+0xa96/0x19c0 [i915]
[ 3083.158127] i915_gem_execbuffer2+0x1ad/0x550 [i915]
[ 3083.158140] drm_ioctl_kernel+0xa7/0xf0 [drm]
[ 3083.158153] drm_ioctl+0x45b/0x560 [drm]
[ 3083.158155] do_vfs_ioctl+0x13b/0x880
[ 3083.158156] SyS_ioctl+0x74/0x80
[ 3083.158158] entry_SYSCALL_64_fastpath+0x1a/0x7d
[ 3083.158162] The buggy address belongs to the object at
ffff8806bf20f400
which belongs to the cache i915_dependency of size 64
[ 3083.158166] The buggy address is located 0 bytes inside of
64-byte region [
ffff8806bf20f400,
ffff8806bf20f440)
[ 3083.158168] The buggy address belongs to the page:
[ 3083.158171] page:
00000000d43decc4 count:1 mapcount:0 mapping: (null) index:0x0
[ 3083.158174] flags: 0x17ffe0000000100(slab)
[ 3083.158179] raw:
017ffe0000000100 0000000000000000 0000000000000000 0000000180200020
[ 3083.158182] raw:
ffffea001afc16c0 0000000500000005 ffff880731b881c0 0000000000000000
[ 3083.158184] page dumped because: kasan: bad access detected
[ 3083.158187] Memory state around the buggy address:
[ 3083.158190]
ffff8806bf20f300: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[ 3083.158192]
ffff8806bf20f380: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[ 3083.158195] >
ffff8806bf20f400: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[ 3083.158196] ^
[ 3083.158199]
ffff8806bf20f480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[ 3083.158201]
ffff8806bf20f500: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[ 3083.158203] ==================================================================
Reported-by: Alexandru Chirvasitu <achirvasub@gmail.com>
Reported-by: Mike Keehan <mike@keehan.net>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104436
Fixes: 1f181225f8ec ("drm/i915/execlists: Keep request->priority for its lifetime")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Alexandru Chirvasitu <achirvasub@gmail.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Tested-by: Alexandru Chirvasitu <achirvasub@gmail.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180106105618.13532-1-chris@chris-wilson.co.uk
(cherry picked from commit
c218ee03b9315073ce43992792554dafa0626eb8)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Kenneth Graunke [Fri, 5 Jan 2018 08:59:05 +0000 (00:59 -0800)]
drm/i915: Whitelist SLICE_COMMON_ECO_CHICKEN1 on Geminilake.
Geminilake requires the 3D driver to select whether barriers are
intended for compute shaders, or tessellation control shaders, by
whacking a "Barrier Mode" bit in SLICE_COMMON_ECO_CHICKEN1 when
switching pipelines. Failure to do this properly can result in GPU
hangs.
Unfortunately, this means it needs to switch mid-batch, so only
userspace can properly set it. To facilitate this, the kernel needs
to whitelist the register.
The workarounds page currently tags this as applying to Broxton only,
but that doesn't make sense. The documentation for the register it
references says the bit userspace is supposed to toggle only exists on
Geminilake. Empirically, the Mesa patch to toggle this bit appears to
fix intermittent GPU hangs in tessellation control shader barrier tests
on Geminilake; we haven't seen those hangs on Broxton.
v2: Mention WA #0862 in the comment (it doesn't have a name).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180105085905.9298-1-kenneth@whitecape.org
(cherry picked from commit
ab062639edb0412daf6de540725276b9a5d217f9)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Linus Torvalds [Thu, 11 Jan 2018 01:55:42 +0000 (17:55 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs
Pull vfs regression fix from Al Viro/
Fix a leak in socket() introduced by commit
8e1611e23579 ("make
sock_alloc_file() do sock_release() on failures").
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
Fix a leak in socket(2) when we fail to allocate a file descriptor.
Linus Torvalds [Thu, 11 Jan 2018 01:53:18 +0000 (17:53 -0800)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) BPF speculation prevention and BPF_JIT_ALWAYS_ON, from Alexei
Starovoitov.
2) Revert dev_get_random_name() changes as adjust the error code
returns seen by userspace definitely breaks stuff.
3) Fix TX DMA map/unmap on older iwlwifi devices, from Emmanuel
Grumbach.
4) From wrong AF family when requesting sock diag modules, from Andrii
Vladyka.
5) Don't add new ipv6 routes attached to the null_entry, from Wei Wang.
6) Some SCTP sockopt length fixes from Marcelo Ricardo Leitner.
7) Don't leak when removing VLAN ID 0, from Cong Wang.
8) Hey there's a potential leak in ipv6_make_skb() too, from Eric
Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (27 commits)
ipv6: sr: fix TLVs not being copied using setsockopt
ipv6: fix possible mem leaks in ipv6_make_skb()
mlxsw: spectrum_qdisc: Don't use variable array in mlxsw_sp_tclass_congestion_enable
mlxsw: pci: Wait after reset before accessing HW
nfp: always unmask aux interrupts at init
8021q: fix a memory leak for VLAN 0 device
of_mdio: avoid MDIO bus removal when a PHY is missing
caif_usb: use strlcpy() instead of strncpy()
doc: clarification about setting SO_ZEROCOPY
net: gianfar_ptp: move set_fipers() to spinlock protecting area
sctp: make use of pre-calculated len
sctp: add a ceiling to optlen in some sockopts
sctp: GFP_ATOMIC is not needed in sctp_setsockopt_events
bpf: introduce BPF_JIT_ALWAYS_ON config
bpf: avoid false sharing of map refcount with max_entries
ipv6: remove null_entry before adding default route
SolutionEngine771x: add Ether TSU resource
SolutionEngine771x: fix Ether platform data
docs-rst: networking: wire up msg_zerocopy
net: ipv4: emulate READ_ONCE() on ->hdrincl bit-field in raw_sendmsg()
...
Al Viro [Wed, 10 Jan 2018 23:47:05 +0000 (18:47 -0500)]
Fix a leak in socket(2) when we fail to allocate a file descriptor.
Got broken by "make sock_alloc_file() do sock_release() on failures" -
cleanup after sock_map_fd() failure got pulled all the way into
sock_alloc_file(), but it used to serve the case when sock_map_fd()
failed *before* getting to sock_alloc_file() as well, and that got
lost. Trivial to fix, fortunately.
Fixes: 8e1611e23579 (make sock_alloc_file() do sock_release() on failures)
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Mathieu Xhonneux [Wed, 10 Jan 2018 13:35:49 +0000 (13:35 +0000)]
ipv6: sr: fix TLVs not being copied using setsockopt
Function ipv6_push_rthdr4 allows to add an IPv6 Segment Routing Header
to a socket through setsockopt, but the current implementation doesn't
copy possible TLVs at the end of the SRH received from userspace.
Therefore, the execution of the following branch if (sr_has_hmac(sr_phdr))
{ ... } will never complete since the len and type fields of a possible
HMAC TLV are not copied, hence seg6_get_tlv_hmac will return an error,
and the HMAC will not be computed.
This commit adds a memcpy in case TLVs have been appended to the SRH.
Fixes: a149e7c7ce81 ("ipv6: sr: add support for SRH injection through setsockopt")
Acked-by: David Lebrun <dlebrun@google.com>
Signed-off-by: Mathieu Xhonneux <m.xhonneux@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 10 Jan 2018 11:45:49 +0000 (03:45 -0800)]
ipv6: fix possible mem leaks in ipv6_make_skb()
ip6_setup_cork() might return an error, while memory allocations have
been done and must be rolled back.
Fixes: 6422398c2ab0 ("ipv6: introduce ipv6_make_skb")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Reported-by: Mike Maloney <maloney@google.com>
Acked-by: Mike Maloney <maloney@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 10 Jan 2018 20:58:23 +0000 (15:58 -0500)]
Merge branch 'mlxsw-couple-of-fixes'
Jiri Pirko says:
====================
mlxsw: couple of fixes
Couple of small fixes for mlxsw driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Wed, 10 Jan 2018 10:42:44 +0000 (11:42 +0100)]
mlxsw: spectrum_qdisc: Don't use variable array in mlxsw_sp_tclass_congestion_enable
Resolve the sparse warning:
"sparse: Variable length array is used."
Use 2 arrays for 2 PRM register accesses.
Fixes: 96f17e0776c2 ("mlxsw: spectrum: Support RED qdisc offload")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Yuval Mintz <yuvalm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yuval Mintz [Wed, 10 Jan 2018 10:42:43 +0000 (11:42 +0100)]
mlxsw: pci: Wait after reset before accessing HW
After performing reset driver polls on HW indication until learning
that the reset is done, but immediately after reset the device becomes
unresponsive which might lead to completion timeout on the first read.
Wait for 100ms before starting the polling.
Fixes: 233fa44bd67a ("mlxsw: pci: Implement reset done check")
Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 10 Jan 2018 02:14:28 +0000 (18:14 -0800)]
nfp: always unmask aux interrupts at init
The link state and exception interrupts may be masked when we probe.
The firmware should in theory prevent sending (and automasking) those
interrupts if the device is disabled, but if my reading of the FW code
is correct there are firmwares out there with race conditions in this
area. The interrupt may also be masked if previous driver which used
the device was malfunctioning and we didn't load the FW (there is no
other good way to comprehensively reset the PF).
Note that FW unmasks the data interrupts by itself when vNIC is
enabled, such helpful operation is not performed for LSC/EXN interrupts.
Always unmask the auxiliary interrupts after request_irq(). On the
remove path add missing PCI write flush before free_irq().
Fixes: 4c3523623dc0 ("net: add driver for Netronome NFP4000/NFP6000 NIC VFs")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cong Wang [Tue, 9 Jan 2018 21:40:41 +0000 (13:40 -0800)]
8021q: fix a memory leak for VLAN 0 device
A vlan device with vid 0 is allow to creat by not able to be fully
cleaned up by unregister_vlan_dev() which checks for vlan_id!=0.
Also, VLAN 0 is probably not a valid number and it is kinda
"reserved" for HW accelerating devices, but it is probably too
late to reject it from creation even if makes sense. Instead,
just remove the check in unregister_vlan_dev().
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Fixes: ad1afb003939 ("vlan_dev: VLAN 0 should be treated as "no vlan tag" (802.1p packet)")
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 10 Jan 2018 20:08:46 +0000 (15:08 -0500)]
Merge tag 'wireless-drivers-for-davem-2018-01-09' of git://git./linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for 4.15
Hopefully the last set of fixes for 4.15.
iwlwifi
* fix DMA mapping regression since v4.14
wcn36xx
* fix dynamic power save which has been broken since the driver was commited
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Madalin Bucur [Tue, 9 Jan 2018 12:43:34 +0000 (14:43 +0200)]
of_mdio: avoid MDIO bus removal when a PHY is missing
If one of the child devices is missing the of_mdiobus_register_phy()
call will return -ENODEV. When a missing device is encountered the
registration of the remaining PHYs is stopped and the MDIO bus will
fail to register. Propagate all errors except ENODEV to avoid it.
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xiongfeng Wang [Tue, 9 Jan 2018 11:58:18 +0000 (19:58 +0800)]
caif_usb: use strlcpy() instead of strncpy()
gcc-8 reports
net/caif/caif_usb.c: In function 'cfusbl_device_notify':
./include/linux/string.h:245:9: warning: '__builtin_strncpy' output may
be truncated copying 15 bytes from a string of length 15
[-Wstringop-truncation]
The compiler require that the input param 'len' of strncpy() should be
greater than the length of the src string, so that '\0' is copied as
well. We can just use strlcpy() to avoid this warning.
Signed-off-by: Xiongfeng Wang <xiongfeng.wang@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kornilios Kourtis [Tue, 9 Jan 2018 08:52:22 +0000 (09:52 +0100)]
doc: clarification about setting SO_ZEROCOPY
Signed-off-by: Kornilios Kourtis <kou@zurich.ibm.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yangbo Lu [Tue, 9 Jan 2018 03:02:33 +0000 (11:02 +0800)]
net: gianfar_ptp: move set_fipers() to spinlock protecting area
set_fipers() calling should be protected by spinlock in
case that any interrupt breaks related registers setting
and the function we expect. This patch is to move set_fipers()
to spinlock protecting area in ptp_gianfar_adjtime().
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 10 Jan 2018 19:53:23 +0000 (14:53 -0500)]
Merge branch 'sctp-Some-sockopt-optlen-fixes'
Marcelo Ricardo Leitner says:
====================
sctp: Some sockopt optlen fixes
Hangbin Liu reported that some SCTP sockopt are allowing the user to get
the kernel to allocate really large buffers by not having a ceiling on
optlen.
This patchset address this issue (in patch 2), replace an GFP_ATOMIC
that isn't needed and avoid calculating the option size multiple times
in some setsockopt.
====================
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marcelo Ricardo Leitner [Mon, 8 Jan 2018 21:02:29 +0000 (19:02 -0200)]
sctp: make use of pre-calculated len
Some sockopt handling functions were calculating the length of the
buffer to be written to userspace and then calculating it again when
actually writing the buffer, which could lead to some write not using
an up-to-date length.
This patch updates such places to just make use of the len variable.
Also, replace some sizeof(type) to sizeof(var).
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marcelo Ricardo Leitner [Mon, 8 Jan 2018 21:02:28 +0000 (19:02 -0200)]
sctp: add a ceiling to optlen in some sockopts
Hangbin Liu reported that some sockopt calls could cause the kernel to log
a warning on memory allocation failure if the user supplied a large optlen
value. That is because some of them called memdup_user() without a ceiling
on optlen, allowing it to try to allocate really large buffers.
This patch adds a ceiling by limiting optlen to the maximum allowed that
would still make sense for these sockopt.
Reported-by: Hangbin Liu <haliu@redhat.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marcelo Ricardo Leitner [Mon, 8 Jan 2018 21:02:27 +0000 (19:02 -0200)]
sctp: GFP_ATOMIC is not needed in sctp_setsockopt_events
So replace it with GFP_USER and also add __GFP_NOWARN.
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Wed, 10 Jan 2018 19:18:31 +0000 (11:18 -0800)]
Merge tag 'sound-4.15-rc8' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of the last-minute small PCM fixes:
- A workaround for the recent regression wrt PulseAudio
- Removal of spurious WARN_ON() that is triggered by syzkaller
- Fixes for aloop, hardening racy accesses
- Fixes in PCM OSS emulation wrt the unabortable loops that may cause
RCU stall"
* tag 'sound-4.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: pcm: Allow aborting mutex lock at OSS read/write loops
ALSA: pcm: Abort properly at pending signal in OSS read/write loops
ALSA: aloop: Fix racy hw constraints adjustment
ALSA: aloop: Fix inconsistent format due to incomplete rule
ALSA: aloop: Release cable upon open error path
ALSA: pcm: Workaround for weird PulseAudio behavior on rewind error
ALSA: pcm: Add missing error checks in OSS emulation plugin builder
ALSA: pcm: Remove incorrect snd_BUG_ON() usages
David S. Miller [Wed, 10 Jan 2018 16:17:21 +0000 (11:17 -0500)]
Merge git://git./pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2018-01-09
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Prevent out-of-bounds speculation in BPF maps by masking the
index after bounds checks in order to fix spectre v1, and
add an option BPF_JIT_ALWAYS_ON into Kconfig that allows for
removing the BPF interpreter from the kernel in favor of
JIT-only mode to make spectre v2 harder, from Alexei.
2) Remove false sharing of map refcount with max_entries which
was used in spectre v1, from Daniel.
3) Add a missing NULL psock check in sockmap in order to fix
a race, from John.
4) Fix test_align BPF selftest case since a recent change in
verifier rejects the bit-wise arithmetic on pointers
earlier but test_align update was missing, from Alexei.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Wed, 10 Jan 2018 09:40:04 +0000 (12:40 +0300)]
drm/vmwgfx: Potential off by one in vmw_view_add()
The vmw_view_cmd_to_type() function returns vmw_view_max (3) on error.
It's one element beyond the end of the vmw_view_cotables[] table.
My read on this is that it's possible to hit this failure. header->id
comes from vmw_cmd_check() and it's a user controlled number between
1040 and 1225 so we can hit that error. But I don't have the hardware
to test this code.
Fixes: d80efd5cb3de ("drm/vmwgfx: Initial DX support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Cc: <stable@vger.kernel.org>
Ross Lagerwall [Tue, 9 Jan 2018 12:10:22 +0000 (12:10 +0000)]
xen/gntdev: Fix partial gntdev_mmap() cleanup
When cleaning up after a partially successful gntdev_mmap(), unmap the
successfully mapped grant pages otherwise Xen will kill the domain if
in debug mode (Attempt to implicitly unmap a granted PTE) or Linux will
kill the process and emit "BUG: Bad page map in process" if Xen is in
release mode.
This is only needed when use_ptemod is true because gntdev_put_map()
will unmap grant pages itself when use_ptemod is false.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Ross Lagerwall [Tue, 9 Jan 2018 12:10:21 +0000 (12:10 +0000)]
xen/gntdev: Fix off-by-one error when unmapping with holes
If the requested range has a hole, the calculation of the number of
pages to unmap is off by one. Fix it.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Geert Uytterhoeven [Tue, 9 Jan 2018 18:08:21 +0000 (19:08 +0100)]
gpio: Add missing open drain/source handling to gpiod_set_value_cansleep()
Since commit
f11a04464ae57e8d ("i2c: gpio: Enable working over slow
can_sleep GPIOs"), probing the i2c RTC connected to an i2c-gpio bus on
r8a7740/armadillo fails with:
rtc-s35390a 0-0030: error resetting chip
rtc-s35390a: probe of 0-0030 failed with error -5
More debug code reveals:
i2c i2c-0: master_xfer[0] R, addr=0x30, len=1
i2c i2c-0: NAK from device addr 0x30 msg #0
s35390a_get_reg: ret = -6
Commit
02e479808b5d62f8 ("gpio: Alter semantics of *raw* operations to
actually be raw") moved open drain/source handling from
gpiod_set_raw_value_commit() to gpiod_set_value(), but forgot to take
into account that gpiod_set_value_cansleep() also needs this handling.
The i2c protocol mandates that i2c signals are open drain, hence i2c
communication fails.
Fix this by adding the missing handling to gpiod_set_value_cansleep(),
using a new common helper gpiod_set_value_nocheck().
Fixes: 02e479808b5d62f8 ("gpio: Alter semantics of *raw* operations to actually be raw")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
[removed underscore syntax, added kerneldoc]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Thierry Reding [Wed, 10 Jan 2018 12:04:58 +0000 (13:04 +0100)]
drm/tegra: sor: Fix hang on Tegra124 eDP
The SOR0 found on Tegra124 and Tegra210 only supports eDP and LVDS and
therefore has a slightly different clock tree than the SOR1 which does
not support eDP, but HDMI and DP instead.
Commit
e1335e2f0cfc ("drm/tegra: sor: Reimplement pad clock") breaks
setups with eDP because the sor->clk_out clock is uninitialized and
therefore setting the parent clock (either the safe clock or either of
the display PLLs) fails, which can cause hangs later on since there is
no clock driving the module.
Fix this by falling back to the module clock for sor->clk_out on those
setups. This guarantees that the module will always be clocked by an
enabled clock and hence prevents those hangs.
Fixes: e1335e2f0cfc ("drm/tegra: sor: Reimplement pad clock")
Reported-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
David Gibson [Wed, 10 Jan 2018 06:04:39 +0000 (17:04 +1100)]
KVM: PPC: Book3S HV: Always flush TLB in kvmppc_alloc_reset_hpt()
The KVM_PPC_ALLOCATE_HTAB ioctl(), implemented by kvmppc_alloc_reset_hpt()
is supposed to completely clear and reset a guest's Hashed Page Table (HPT)
allocating or re-allocating it if necessary.
In the case where an HPT of the right size already exists and it just
zeroes it, it forces a TLB flush on all guest CPUs, to remove any stale TLB
entries loaded from the old HPT.
However, that situation can arise when the HPT is resizing as well - or
even when switching from an RPT to HPT - so those cases need a TLB flush as
well.
So, move the TLB flush to trigger in all cases except for errors.
Cc: stable@vger.kernel.org # v4.10+
Fixes: f98a8bf9ee20 ("KVM: PPC: Book3S HV: Allow KVM_PPC_ALLOCATE_HTAB ioctl() to change HPT size")
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Alexey Kardashevskiy [Wed, 22 Nov 2017 03:42:21 +0000 (14:42 +1100)]
KVM: PPC: Book3S PR: Fix WIMG handling under pHyp
Commit
96df226 ("KVM: PPC: Book3S PR: Preserve storage control bits")
added code to preserve WIMG bits but it missed 2 special cases:
- a magic page in kvmppc_mmu_book3s_64_xlate() and
- guest real mode in kvmppc_handle_pagefault().
For these ptes, WIMG was 0 and pHyp failed on these causing a guest to
stop in the very beginning at NIP=0x100 (due to
bd9166ffe "KVM: PPC:
Book3S PR: Exit KVM on failed mapping").
According to LoPAPR v1.1 14.5.4.1.2 H_ENTER:
The hypervisor checks that the WIMG bits within the PTE are appropriate
for the physical page number else H_Parameter return. (For System Memory
pages WIMG=0010, or, 1110 if the SAO option is enabled, and for IO pages
WIMG=01**.)
This hence initializes WIMG to non-zero value HPTE_R_M (0x10), as expected
by pHyp.
[paulus@ozlabs.org - fix compile for 32-bit]
Cc: stable@vger.kernel.org # v4.11+
Fixes: 96df226 "KVM: PPC: Book3S PR: Preserve storage control bits"
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Tested-by: Ruediger Oertel <ro@suse.de>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Mathieu Desnoyers [Fri, 15 Dec 2017 19:23:10 +0000 (14:23 -0500)]
membarrier: Disable preemption when calling smp_call_function_many()
smp_call_function_many() requires disabling preemption around the call.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: <stable@vger.kernel.org> # v4.14+
Cc: Andrea Parri <parri.andrea@gmail.com>
Cc: Andrew Hunter <ahh@google.com>
Cc: Avi Kivity <avi@scylladb.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Dave Watson <davejwatson@fb.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Maged Michael <maged.michael@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul E . McKenney <paulmck@linux.vnet.ibm.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20171215192310.25293-1-mathieu.desnoyers@efficios.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Linus Torvalds [Tue, 9 Jan 2018 23:45:06 +0000 (15:45 -0800)]
Merge tag 'riscv-for-linus-4.15-rc8_cleanups' of git://git./linux/kernel/git/palmer/linux
Pull RISC-V updates from Palmer Dabbelt:
"This contains what I hope are the last RISC-V changes to go into 4.15.
I know it's a bit last minute, but I think they're all fairly small
changes:
- SR_* constants have been renamed to match the latest ISA
specification.
- Some CONFIG_MMU #ifdef cruft has been removed. We've never
supported !CONFIG_MMU.
- __NR_riscv_flush_icache is now visible to userspace. We were hoping
to avoid making this public in order to force userspace to call the
vDSO entry, but it looks like QEMU's user-mode emulation doesn't
want to emulate a vDSO. In order to allow glibc to fall back to a
system call when the vDSO entry doesn't exist we're just
- Our defconfig is no long empty. This is another one that just
slipped through the cracks. The defconfig isn't perfect, but it's
at least close to what users will want for the first RISC-V
development board. Getting closer is kind of splitting hairs here:
none of the RISC-V specific drivers are in yet, so it's not like
things will boot out of the box.
The only one that's strictly necessary is the __NR_riscv_flush_icache
change, as I want that to be part of the public API starting from our
first kernel so nobody has to worry about it. The others are nice to
haves, but they seem sane for 4.15 to me"
* tag 'riscv-for-linus-4.15-rc8_cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/linux:
riscv: rename SR_* constants to match the spec
riscv: remove CONFIG_MMU ifdefs
RISC-V: Make __NR_riscv_flush_icache visible to userspace
RISC-V: Add a basic defconfig
Linus Torvalds [Tue, 9 Jan 2018 23:43:13 +0000 (15:43 -0800)]
Merge branch 'upstream' of git://git.linux-mips.org/ralf/upstream-linus
Pull MIPS fixes from Ralf Baechle:
"Another round of MIPS fixes for 4.15.
- Maciej Rozycki found another series of FP issues which requires a
seven part series to restructure and fix.
- James fixes a warning about .set mt which gas doesn't like when
building for R1 processors"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: Validate PR_SET_FP_MODE prctl(2) requests against the ABI of the task
MIPS: Disallow outsized PTRACE_SETREGSET NT_PRFPREG regset accesses
MIPS: Also verify sizeof `elf_fpreg_t' with PTRACE_SETREGSET
MIPS: Fix an FCSR access API regression with NT_PRFPREG and MSA
MIPS: Consistently handle buffer counter with PTRACE_SETREGSET
MIPS: Guard against any partial write attempt with PTRACE_SETREGSET
MIPS: Factor out NT_PRFPREG regset access helpers
MIPS: CPS: Fix r1 .set mt assembler warning
Alexei Starovoitov [Tue, 9 Jan 2018 18:04:29 +0000 (10:04 -0800)]
bpf: introduce BPF_JIT_ALWAYS_ON config
The BPF interpreter has been used as part of the spectre 2 attack CVE-2017-5715.
A quote from goolge project zero blog:
"At this point, it would normally be necessary to locate gadgets in
the host kernel code that can be used to actually leak data by reading
from an attacker-controlled location, shifting and masking the result
appropriately and then using the result of that as offset to an
attacker-controlled address for a load. But piecing gadgets together
and figuring out which ones work in a speculation context seems annoying.
So instead, we decided to use the eBPF interpreter, which is built into
the host kernel - while there is no legitimate way to invoke it from inside
a VM, the presence of the code in the host kernel's text section is sufficient
to make it usable for the attack, just like with ordinary ROP gadgets."
To make attacker job harder introduce BPF_JIT_ALWAYS_ON config
option that removes interpreter from the kernel in favor of JIT-only mode.
So far eBPF JIT is supported by:
x64, arm64, arm32, sparc64, s390, powerpc64, mips64
The start of JITed program is randomized and code page is marked as read-only.
In addition "constant blinding" can be turned on with net.core.bpf_jit_harden
v2->v3:
- move __bpf_prog_ret0 under ifdef (Daniel)
v1->v2:
- fix init order, test_bpf and cBPF (Daniel's feedback)
- fix offloaded bpf (Jakub's feedback)
- add 'return 0' dummy in case something can invoke prog->bpf_func
- retarget bpf tree. For bpf-next the patch would need one extra hunk.
It will be sent when the trees are merged back to net-next
Considered doing:
int bpf_jit_enable __read_mostly = BPF_EBPF_JIT_DEFAULT;
but it seems better to land the patch as-is and in bpf-next remove
bpf_jit_enable global variable from all JITs, consolidate in one place
and remove this jit_init() function.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Linus Torvalds [Tue, 9 Jan 2018 19:20:55 +0000 (11:20 -0800)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A set of fixes that should go into this release. This contains:
- An NVMe pull request from Christoph, with a few critical fixes for
NVMe.
- A block drain queue fix from Ming.
- The concurrent lo_open/release fix for loop"
* 'for-linus' of git://git.kernel.dk/linux-block:
loop: fix concurrent lo_open/lo_release
block: drain queue before waiting for q_usage_counter becoming zero
nvme-fcloop: avoid possible uninitialized variable warning
nvme-mpath: fix last path removal during traffic
nvme-rdma: fix concurrent reset and reconnect
nvme: fix sector units when going between formats
nvme-pci: move use_sgl initialization to nvme_init_iod()
Daniel Borkmann [Tue, 9 Jan 2018 12:17:44 +0000 (13:17 +0100)]
bpf: avoid false sharing of map refcount with max_entries
In addition to commit
b2157399cc98 ("bpf: prevent out-of-bounds
speculation") also change the layout of struct bpf_map such that
false sharing of fast-path members like max_entries is avoided
when the maps reference counter is altered. Therefore enforce
them to be placed into separate cachelines.
pahole dump after change:
struct bpf_map {
const struct bpf_map_ops * ops; /* 0 8 */
struct bpf_map * inner_map_meta; /* 8 8 */
void * security; /* 16 8 */
enum bpf_map_type map_type; /* 24 4 */
u32 key_size; /* 28 4 */
u32 value_size; /* 32 4 */
u32 max_entries; /* 36 4 */
u32 map_flags; /* 40 4 */
u32 pages; /* 44 4 */
u32 id; /* 48 4 */
int numa_node; /* 52 4 */
bool unpriv_array; /* 56 1 */
/* XXX 7 bytes hole, try to pack */
/* --- cacheline 1 boundary (64 bytes) --- */
struct user_struct * user; /* 64 8 */
atomic_t refcnt; /* 72 4 */
atomic_t usercnt; /* 76 4 */
struct work_struct work; /* 80 32 */
char name[16]; /* 112 16 */
/* --- cacheline 2 boundary (128 bytes) --- */
/* size: 128, cachelines: 2, members: 17 */
/* sum members: 121, holes: 1, sum holes: 7 */
};
Now all entries in the first cacheline are read only throughout
the life time of the map, set up once during map creation. Overall
struct size and number of cachelines doesn't change from the
reordering. struct bpf_map is usually first member and embedded
in map structs in specific map implementations, so also avoid those
members to sit at the end where it could potentially share the
cacheline with first map values e.g. in the array since remote
CPUs could trigger map updates just as well for those (easily
dirtying members like max_entries intentionally as well) while
having subsequent values in cache.
Quoting from Google's Project Zero blog [1]:
Additionally, at least on the Intel machine on which this was
tested, bouncing modified cache lines between cores is slow,
apparently because the MESI protocol is used for cache coherence
[8]. Changing the reference counter of an eBPF array on one
physical CPU core causes the cache line containing the reference
counter to be bounced over to that CPU core, making reads of the
reference counter on all other CPU cores slow until the changed
reference counter has been written back to memory. Because the
length and the reference counter of an eBPF array are stored in
the same cache line, this also means that changing the reference
counter on one physical CPU core causes reads of the eBPF array's
length to be slow on other physical CPU cores (intentional false
sharing).
While this doesn't 'control' the out-of-bounds speculation through
masking the index as in commit
b2157399cc98, triggering a manipulation
of the map's reference counter is really trivial, so lets not allow
to easily affect max_entries from it.
Splitting to separate cachelines also generally makes sense from
a performance perspective anyway in that fast-path won't have a
cache miss if the map gets pinned, reused in other progs, etc out
of control path, thus also avoids unintentional false sharing.
[1] https://googleprojectzero.blogspot.ch/2018/01/reading-privileged-memory-with-side.html
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Wei Wang [Mon, 8 Jan 2018 18:34:00 +0000 (10:34 -0800)]
ipv6: remove null_entry before adding default route
In the current code, when creating a new fib6 table, tb6_root.leaf gets
initialized to net->ipv6.ip6_null_entry.
If a default route is being added with rt->rt6i_metric = 0xffffffff,
fib6_add() will add this route after net->ipv6.ip6_null_entry. As
null_entry is shared, it could cause problem.
In order to fix it, set fn->leaf to NULL before calling
fib6_add_rt2node() when trying to add the first default route.
And reset fn->leaf to null_entry when adding fails or when deleting the
last default route.
syzkaller reported the following issue which is fixed by this commit:
WARNING: suspicious RCU usage
4.15.0-rc5+ #171 Not tainted
-----------------------------
net/ipv6/ip6_fib.c:1702 suspicious rcu_dereference_protected() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
4 locks held by swapper/0/0:
#0: ((&net->ipv6.ip6_fib_timer)){+.-.}, at: [<
00000000d43f631b>] lockdep_copy_map include/linux/lockdep.h:178 [inline]
#0: ((&net->ipv6.ip6_fib_timer)){+.-.}, at: [<
00000000d43f631b>] call_timer_fn+0x1c6/0x820 kernel/time/timer.c:1310
#1: (&(&net->ipv6.fib6_gc_lock)->rlock){+.-.}, at: [<
000000002ff9d65c>] spin_lock_bh include/linux/spinlock.h:315 [inline]
#1: (&(&net->ipv6.fib6_gc_lock)->rlock){+.-.}, at: [<
000000002ff9d65c>] fib6_run_gc+0x9d/0x3c0 net/ipv6/ip6_fib.c:2007
#2: (rcu_read_lock){....}, at: [<
0000000091db762d>] __fib6_clean_all+0x0/0x3a0 net/ipv6/ip6_fib.c:1560
#3: (&(&tb->tb6_lock)->rlock){+.-.}, at: [<
000000009e503581>] spin_lock_bh include/linux/spinlock.h:315 [inline]
#3: (&(&tb->tb6_lock)->rlock){+.-.}, at: [<
000000009e503581>] __fib6_clean_all+0x1d0/0x3a0 net/ipv6/ip6_fib.c:1948
stack backtrace:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.15.0-rc5+ #171
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x194/0x257 lib/dump_stack.c:53
lockdep_rcu_suspicious+0x123/0x170 kernel/locking/lockdep.c:4585
fib6_del+0xcaa/0x11b0 net/ipv6/ip6_fib.c:1701
fib6_clean_node+0x3aa/0x4f0 net/ipv6/ip6_fib.c:1892
fib6_walk_continue+0x46c/0x8a0 net/ipv6/ip6_fib.c:1815
fib6_walk+0x91/0xf0 net/ipv6/ip6_fib.c:1863
fib6_clean_tree+0x1e6/0x340 net/ipv6/ip6_fib.c:1933
__fib6_clean_all+0x1f4/0x3a0 net/ipv6/ip6_fib.c:1949
fib6_clean_all net/ipv6/ip6_fib.c:1960 [inline]
fib6_run_gc+0x16b/0x3c0 net/ipv6/ip6_fib.c:2016
fib6_gc_timer_cb+0x20/0x30 net/ipv6/ip6_fib.c:2033
call_timer_fn+0x228/0x820 kernel/time/timer.c:1320
expire_timers kernel/time/timer.c:1357 [inline]
__run_timers+0x7ee/0xb70 kernel/time/timer.c:1660
run_timer_softirq+0x4c/0xb0 kernel/time/timer.c:1686
__do_softirq+0x2d7/0xb85 kernel/softirq.c:285
invoke_softirq kernel/softirq.c:365 [inline]
irq_exit+0x1cc/0x200 kernel/softirq.c:405
exiting_irq arch/x86/include/asm/apic.h:540 [inline]
smp_apic_timer_interrupt+0x16b/0x700 arch/x86/kernel/apic/apic.c:1052
apic_timer_interrupt+0xa9/0xb0 arch/x86/entry/entry_64.S:904
</IRQ>
Reported-by: syzbot <syzkaller@googlegroups.com>
Fixes: 66f5d6ce53e6 ("ipv6: replace rwlock with rcu and spinlock in fib6_table")
Signed-off-by: Wei Wang <weiwan@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 9 Jan 2018 17:21:14 +0000 (12:21 -0500)]
Merge branch 'Ether-fixes-for-the-SolutionEngine771x-boards'
Sergei Shtylyov says:
====================
Ether fixes for the SolutionEngine771x boards
Here's the series of 2 patches against Linus' repo. This series should
(hoplefully) fix the Ether support on the SolutionEngine771x boards...
[1/2] SolutionEngine771x: fix Ether platform data
[2/2] SolutionEngine771x: add Ether TSU resource
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Sergei Shtylyov [Sat, 6 Jan 2018 18:53:27 +0000 (21:53 +0300)]
SolutionEngine771x: add Ether TSU resource
After the Ether platform data is fixed, the driver probe() method would
still fail since the 'struct sh_eth_cpu_data' corresponding to SH771x
indicates the presence of TSU but the memory resource for it is absent.
Add the missing TSU resource to both Ether devices and fix the harmless
off-by-one error in the main memory resources, while at it...
Fixes: 4986b996882d ("net: sh_eth: remove the SH_TSU_ADDR")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sergei Shtylyov [Sat, 6 Jan 2018 18:53:26 +0000 (21:53 +0300)]
SolutionEngine771x: fix Ether platform data
The 'sh_eth' driver's probe() method would fail on the SolutionEngine7710
board and crash on SolutionEngine7712 board as the platform code is
hopelessly behind the driver's platform data -- it passes the PHY address
instead of 'struct sh_eth_plat_data *'; pass the latter to the driver in
order to fix the bug...
Fixes: 71557a37adb5 ("[netdrvr] sh_eth: Add SH7619 support")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mike Rapoport [Mon, 8 Jan 2018 06:50:17 +0000 (08:50 +0200)]
docs-rst: networking: wire up msg_zerocopy
Fix the following 'make htmldocs' complaint:
Documentation/networking/msg_zerocopy.rst:: WARNING: document isn't included in any toctree.
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nicolai Stange [Mon, 8 Jan 2018 14:54:44 +0000 (15:54 +0100)]
net: ipv4: emulate READ_ONCE() on ->hdrincl bit-field in raw_sendmsg()
Commit
8f659a03a0ba ("net: ipv4: fix for a race condition in
raw_sendmsg") fixed the issue of possibly inconsistent ->hdrincl handling
due to concurrent updates by reading this bit-field member into a local
variable and using the thus stabilized value in subsequent tests.
However, aforementioned commit also adds the (correct) comment that
/* hdrincl should be READ_ONCE(inet->hdrincl)
* but READ_ONCE() doesn't work with bit fields
*/
because as it stands, the compiler is free to shortcut or even eliminate
the local variable at its will.
Note that I have not seen anything like this happening in reality and thus,
the concern is a theoretical one.
However, in order to be on the safe side, emulate a READ_ONCE() on the
bit-field by doing it on the local 'hdrincl' variable itself:
int hdrincl = inet->hdrincl;
hdrincl = READ_ONCE(hdrincl);
This breaks the chain in the sense that the compiler is not allowed
to replace subsequent reads from hdrincl with reloads from inet->hdrincl.
Fixes: 8f659a03a0ba ("net: ipv4: fix for a race condition in raw_sendmsg")
Signed-off-by: Nicolai Stange <nstange@suse.de>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xiongfeng Wang [Mon, 8 Jan 2018 11:43:00 +0000 (19:43 +0800)]
net: caif: use strlcpy() instead of strncpy()
gcc-8 reports
net/caif/caif_dev.c: In function 'caif_enroll_dev':
./include/linux/string.h:245:9: warning: '__builtin_strncpy' output may
be truncated copying 15 bytes from a string of length 15
[-Wstringop-truncation]
net/caif/cfctrl.c: In function 'cfctrl_linkup_request':
./include/linux/string.h:245:9: warning: '__builtin_strncpy' output may
be truncated copying 15 bytes from a string of length 15
[-Wstringop-truncation]
net/caif/cfcnfg.c: In function 'caif_connect_client':
./include/linux/string.h:245:9: warning: '__builtin_strncpy' output may
be truncated copying 15 bytes from a string of length 15
[-Wstringop-truncation]
The compiler require that the input param 'len' of strncpy() should be
greater than the length of the src string, so that '\0' is copied as
well. We can just use strlcpy() to avoid this warning.
Signed-off-by: Xiongfeng Wang <xiongfeng.wang@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ilya Dryomov [Thu, 21 Dec 2017 14:35:11 +0000 (15:35 +0100)]
rbd: set max_segments to USHRT_MAX
Commit
d3834fefcfe5 ("rbd: bump queue_max_segments") bumped
max_segments (unsigned short) to max_hw_sectors (unsigned int).
max_hw_sectors is set to the number of 512-byte sectors in an object
and overflows unsigned short for 32M (largest possible) objects, making
the block layer resort to handing us single segment (i.e. single page
or even smaller) bios in that case.
Cc: stable@vger.kernel.org
Fixes: d3834fefcfe5 ("rbd: bump queue_max_segments")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Florian Margaine [Wed, 13 Dec 2017 15:43:59 +0000 (16:43 +0100)]
rbd: reacquire lock should update lock owner client id
Otherwise, future operations on this RBD using exclusive-lock are
going to require the lock from a non-existent client id.
Cc: stable@vger.kernel.org
Fixes: 14bb211d324d ("rbd: support updating the lock cookie without releasing the lock")
Link: http://tracker.ceph.com/issues/19929
Signed-off-by: Florian Margaine <florian@platform.sh>
[idryomov@gmail.com: rbd_set_owner_cid() call, __rbd_lock() helper]
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Andrii Vladyka [Thu, 4 Jan 2018 11:09:17 +0000 (13:09 +0200)]
net: core: fix module type in sock_diag_bind
Use AF_INET6 instead of AF_INET in IPv6-related code path
Signed-off-by: Andrii Vladyka <tulup@mail.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Hellstrom [Tue, 9 Jan 2018 14:33:42 +0000 (15:33 +0100)]
drm/vmwgfx: Don't cache framebuffer maps
Buffer objects need to be either pinned or reserved while a map is active,
that's not the case here, so avoid caching the framebuffer map.
This will cause increasing mapping activity mainly when we don't do
page flipping.
This fixes occasional garbage filled screens when the framebuffer has been
evicted after the map.
Since in-kernel mapping of whole buffer objects is error-prone on 32-bit
architectures and also quite inefficient, we will revisit this later.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Cc: <stable@vger.kernel.org>
Linus Torvalds [Tue, 9 Jan 2018 04:21:39 +0000 (20:21 -0800)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) Frag and UDP handling fixes in i40e driver, from Amritha Nambiar and
Alexander Duyck.
2) Undo unintentional UAPI change in netfilter conntrack, from Florian
Westphal.
3) Revert a change to how error codes are returned from
dev_get_valid_name(), it broke some apps.
4) Cannot cache routes for ipv6 tunnels in the tunnel is ipv4/ipv6
dual-stack. From Eli Cooper.
5) Fix missed PMTU updates in geneve, from Xin Long.
6) Cure double free in macvlan, from Gao Feng.
7) Fix heap out-of-bounds write in rds_message_alloc_sgs(), from
Mohamed Ghannam.
8) FEC bug fixes from FUgang Duan (mis-accounting of dev_id, missed
deferral of probe when the regulator is not ready yet).
9) Missing DMA mapping error checks in 3c59x, from Neil Horman.
10) Turn off Broadcom tags for some b53 switches, from Florian Fainelli.
11) Fix OOPS when get_target_net() is passed an SKB whose NETLINK_CB()
isn't initialized. From Andrei Vagin.
12) Fix crashes in fib6_add(), from Wei Wang.
13) PMTU bug fixes in SCTP from Marcelo Ricardo Leitner.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (56 commits)
sh_eth: fix TXALCR1 offsets
mdio-sun4i: Fix a memory leak
phylink: mark expected switch fall-throughs in phylink_mii_ioctl
sctp: fix the handling of ICMP Frag Needed for too small MTUs
sctp: do not retransmit upon FragNeeded if PMTU discovery is disabled
xen-netfront: enable device after manual module load
bnxt_en: Fix the 'Invalid VF' id check in bnxt_vf_ndo_prep routine.
bnxt_en: Fix population of flow_type in bnxt_hwrm_cfa_flow_alloc()
sh_eth: fix SH7757 GEther initialization
net: fec: free/restore resource in related probe error pathes
uapi/if_ether.h: prevent redefinition of struct ethhdr
ipv6: fix general protection fault in fib6_add()
RDS: null pointer dereference in rds_atomic_free_op
sh_eth: fix TSU resource handling
net: stmmac: enable EEE in MII, GMII or RGMII only
rtnetlink: give a user socket to get_target_net()
MAINTAINERS: Update my email address.
can: ems_usb: improve error reporting for error warning and error passive
can: flex_can: Correct the checking for frame length in flexcan_start_xmit()
can: gs_usb: fix return value of the "set_bittiming" callback
...
Dave Airlie [Tue, 9 Jan 2018 02:03:10 +0000 (12:03 +1000)]
Merge branch 'linux-4.15' of git://github.com/skeggsb/linux into drm-fixes
nouveau displayport regression fix.
* 'linux-4.15' of git://github.com/skeggsb/linux:
drm/nouveau/disp/gf119: add missing drive vfunc ptr
Rob Clark [Sat, 6 Jan 2018 15:59:41 +0000 (10:59 -0500)]
drm/nouveau/disp/gf119: add missing drive vfunc ptr
Fixes broken dp on GF119:
Call Trace:
? nvkm_dp_train_drive+0x183/0x2c0 [nouveau]
nvkm_dp_acquire+0x4f3/0xcd0 [nouveau]
nv50_disp_super_2_2+0x5d/0x470 [nouveau]
? nvkm_devinit_pll_set+0xf/0x20 [nouveau]
gf119_disp_super+0x19c/0x2f0 [nouveau]
process_one_work+0x193/0x3c0
worker_thread+0x35/0x3b0
kthread+0x125/0x140
? process_one_work+0x3c0/0x3c0
? kthread_park+0x60/0x60
ret_from_fork+0x25/0x30
Code: Bad RIP value.
RIP: (null) RSP:
ffffb1e243e4bc38
CR2:
0000000000000000
Fixes: af85389c614a drm/nouveau/disp: shuffle functions around
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103421
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Dave Airlie [Tue, 9 Jan 2018 00:23:48 +0000 (10:23 +1000)]
Merge tag 'drm-misc-fixes-2018-01-08' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Just one vc4 fix.
* tag 'drm-misc-fixes-2018-01-08' of git://anongit.freedesktop.org/drm/drm-misc:
drm/vc4: Move IRQ enable to PM path
Linus Torvalds [Tue, 9 Jan 2018 00:17:31 +0000 (16:17 -0800)]
Merge tag 'for-linus' of git://git./linux/kernel/git/rdma/rdma
Pull rdma fixes from Doug Ledford:
- One line fix to mlx4 error flow (same as mlx5 fix in last pull
request, just in the mlx4 driver)
- Fix a race condition in the IPoIB driver. This patch is larger than
just a one line fix, but resolves a race condition in a fairly
straight forward manner
- Fix a locking issue in the RDMA netlink code. This patch is also
larger than I would like for a late -rc. It has, however, had a week
to bake in the rdma tree prior to this pull request
- One line fix to fix granting remote machine access to memory that
they don't need and shouldn't have
- One line fix to correct the fact that our sgid/dgid pair is swapped
from what you would expect when receiving an incoming connection
request
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
IB/srpt: Fix ACL lookup during login
IB/srpt: Disable RDMA access by the initiator
RDMA/netlink: Fix locking around __ib_get_device_by_index
IB/ipoib: Fix race condition in neigh creation
IB/mlx4: Fix mlx4_ib_alloc_mr error flow
Alexei Starovoitov [Mon, 8 Jan 2018 01:33:02 +0000 (17:33 -0800)]
bpf: prevent out-of-bounds speculation
Under speculation, CPUs may mis-predict branches in bounds checks. Thus,
memory accesses under a bounds check may be speculated even if the
bounds check fails, providing a primitive for building a side channel.
To avoid leaking kernel data round up array-based maps and mask the index
after bounds check, so speculated load with out of bounds index will load
either valid value from the array or zero from the padded area.
Unconditionally mask index for all array types even when max_entries
are not rounded to power of 2 for root user.
When map is created by unpriv user generate a sequence of bpf insns
that includes AND operation to make sure that JITed code includes
the same 'index & index_mask' operation.
If prog_array map is created by unpriv user replace
bpf_tail_call(ctx, map, index);
with
if (index >= max_entries) {
index &= map->index_mask;
bpf_tail_call(ctx, map, index);
}
(along with roundup to power 2) to prevent out-of-bounds speculation.
There is secondary redundant 'if (index >= max_entries)' in the interpreter
and in all JITs, but they can be optimized later if necessary.
Other array-like maps (cpumap, devmap, sockmap, perf_event_array, cgroup_array)
cannot be used by unpriv, so no changes there.
That fixes bpf side of "Variant 1: bounds check bypass (CVE-2017-5753)" on
all architectures with and without JIT.
v2->v3:
Daniel noticed that attack potentially can be crafted via syscall commands
without loading the program, so add masking to those paths as well.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Linus Torvalds [Mon, 8 Jan 2018 19:52:24 +0000 (11:52 -0800)]
Merge tag 'platform-drivers-x86-v4.15-4' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver fix from Darren Hart:
"Address a wmi initcall ordering race resulting in a difficult to
reproduce boot failure"
* tag 'platform-drivers-x86-v4.15-4' of git://git.infradead.org/linux-platform-drivers-x86:
platform/x86: wmi: Call acpi_wmi_init() later
Sergei Shtylyov [Sat, 6 Jan 2018 21:26:47 +0000 (00:26 +0300)]
sh_eth: fix TXALCR1 offsets
The TXALCR1 offsets are incorrect in the register offset tables, most
probably due to copy&paste error. Luckily, the driver never uses this
register. :-)
Fixes: 4a55530f38e4 ("net: sh_eth: modify the definitions of register")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christophe JAILLET [Sat, 6 Jan 2018 08:00:09 +0000 (09:00 +0100)]
mdio-sun4i: Fix a memory leak
If the probing of the regulator is deferred, the memory allocated by
'mdiobus_alloc_size()' will be leaking.
It should be freed before the next call to 'sun4i_mdio_probe()' which will
reallocate it.
Fixes: 4bdcb1dd9feb ("net: Add MDIO bus driver for the Allwinner EMAC")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Gustavo A. R. Silva [Fri, 5 Jan 2018 17:23:45 +0000 (11:23 -0600)]
phylink: mark expected switch fall-throughs in phylink_mii_ioctl
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Addresses-Coverity-ID:
1463447 ("Missing break in switch")
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 8 Jan 2018 19:19:13 +0000 (14:19 -0500)]
Merge branch 'SCTP-PMTU-discovery-fixes'
Marcelo Ricardo Leitner says:
====================
SCTP PMTU discovery fixes
This patchset fixes 2 issues with PMTU discovery that can lead to flood
of retransmissions.
The first patch fixes the issue for when PMTUD is disabled by the
application, while the second fixes it for when its enabled.
Please consider these to stable.
====================
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marcelo Ricardo Leitner [Fri, 5 Jan 2018 13:17:18 +0000 (11:17 -0200)]
sctp: fix the handling of ICMP Frag Needed for too small MTUs
syzbot reported a hang involving SCTP, on which it kept flooding dmesg
with the message:
[ 246.742374] sctp: sctp_transport_update_pmtu: Reported pmtu 508 too
low, using default minimum of 512
That happened because whenever SCTP hits an ICMP Frag Needed, it tries
to adjust to the new MTU and triggers an immediate retransmission. But
it didn't consider the fact that MTUs smaller than the SCTP minimum MTU
allowed (512) would not cause the PMTU to change, and issued the
retransmission anyway (thus leading to another ICMP Frag Needed, and so
on).
As IPv4 (ip_rt_min_pmtu=556) and IPv6 (IPV6_MIN_MTU=1280) minimum MTU
are higher than that, sctp_transport_update_pmtu() is changed to
re-fetch the PMTU that got set after our request, and with that, detect
if there was an actual change or not.
The fix, thus, skips the immediate retransmission if the received ICMP
resulted in no change, in the hope that SCTP will select another path.
Note: The value being used for the minimum MTU (512,
SCTP_DEFAULT_MINSEGMENT) is not right and instead it should be (576,
SCTP_MIN_PMTU), but such change belongs to another patch.
Changes from v1:
- do not disable PMTU discovery, in the light of commit
06ad391919b2 ("[SCTP] Don't disable PMTU discovery when mtu is small")
and as suggested by Xin Long.
- changed the way to break the rtx loop by detecting if the icmp
resulted in a change or not
Changes from v2:
none
See-also: https://lkml.org/lkml/2017/12/22/811
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marcelo Ricardo Leitner [Fri, 5 Jan 2018 13:17:17 +0000 (11:17 -0200)]
sctp: do not retransmit upon FragNeeded if PMTU discovery is disabled
Currently, if PMTU discovery is disabled on a given transport, but the
configured value is higher than the actual PMTU, it is likely that we
will get some icmp Frag Needed. The issue is, if PMTU discovery is
disabled, we won't update the information and will issue a
retransmission immediately, which may very well trigger another ICMP,
and another retransmission, leading to a loop.
The fix is to simply not trigger immediate retransmissions if PMTU
discovery is disabled on the given transport.
Changes from v2:
- updated stale comment, noticed by Xin Long
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eduardo Otubo [Fri, 5 Jan 2018 08:42:16 +0000 (09:42 +0100)]
xen-netfront: enable device after manual module load
When loading the module after unloading it, the network interface would
not be enabled and thus wouldn't have a backend counterpart and unable
to be used by the guest.
The guest would face errors like:
[root@guest ~]# ethtool -i eth0
Cannot get driver information: No such device
[root@guest ~]# ifconfig eth0
eth0: error fetching interface information: Device not found
This patch initializes the state of the netfront device whenever it is
loaded manually, this state would communicate the netback to create its
device and establish the connection between them.
Signed-off-by: Eduardo Otubo <otubo@redhat.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 8 Jan 2018 19:13:45 +0000 (14:13 -0500)]
Merge branch 'bnxt_en_fixes'
Michael Chan says:
====================
bnxt_en: 2 small bug fixes.
The first one fixes the TC Flower flow parameter passed to firmware. The
2nd one fixes the VF index range checking for iproute2 SRIOV related commands.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Venkat Duvvuru [Thu, 4 Jan 2018 23:46:55 +0000 (18:46 -0500)]
bnxt_en: Fix the 'Invalid VF' id check in bnxt_vf_ndo_prep routine.
In bnxt_vf_ndo_prep (which is called by bnxt_get_vf_config ndo), there is a
check for "Invalid VF id". Currently, the check is done against max_vfs.
However, the user doesn't always create max_vfs. So, the check should be
against the created number of VFs. The number of bnxt_vf_info structures
that are allocated in bnxt_alloc_vf_resources routine is the "number of
requested VFs". So, if an "invalid VF id" falls between the requested
number of VFs and the max_vfs, the driver will be dereferencing an invalid
pointer.
Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.")
Signed-off-by: Venkat Devvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sunil Challa [Thu, 4 Jan 2018 23:46:54 +0000 (18:46 -0500)]
bnxt_en: Fix population of flow_type in bnxt_hwrm_cfa_flow_alloc()
flow_type in HWRM_FLOW_ALLOC is not being populated correctly due to
incorrect passing of pointer and size of l3_mask argument of is_wildcard().
Fixed this.
Fixes: db1d36a27324 ("bnxt_en: add TC flower offload flow_alloc/free FW cmds")
Signed-off-by: Sunil Challa <sunilkumar.challa@broadcom.com>
Reviewed-by: Sathya Perla <sathya.perla@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Mon, 8 Jan 2018 19:13:08 +0000 (11:13 -0800)]
Merge branch 'for-4.15-fixes' of git://git./linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
"This contains fixes for the following two non-trivial issues:
- The task iterator got broken while adding thread mode support for
v4.14. It was less visible because it only triggers when both
cgroup1 and cgroup2 hierarchies are in use. The recent versions of
systemd uses cgroup2 for process management even when cgroup1 is
used for resource control exposing this issue.
- cpuset CPU hotplug path could deadlock when racing against exits.
There also are two patches to replace unlimited strcpy() usages with
strlcpy()"
* 'for-4.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: fix css_task_iter crash on CSS_TASK_ITER_PROC
cgroup: Fix deadlock in cpu hotplug path
cgroup: use strlcpy() instead of strscpy() to avoid spurious warning
cgroup: avoid copying strings longer than the buffers
Eric Biggers [Fri, 29 Dec 2017 19:53:03 +0000 (13:53 -0600)]
locking/refcounts: Remove stale comment from the ARCH_HAS_REFCOUNT Kconfig entry
ARCH_HAS_REFCOUNT is no longer marked as broken ('if BROKEN'), so remove
the stale comment regarding it being broken.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20171229195303.17781-1-ebiggers3@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Geert Uytterhoeven [Tue, 2 Jan 2018 11:13:10 +0000 (12:13 +0100)]
sched/isolation: Make CONFIG_CPU_ISOLATION=y depend on SMP or COMPILE_TEST
On uniprocessor systems, critical and non-critical tasks cannot be
isolated, as there is only a single CPU core. Hence enabling CPU
isolation by default on such systems does not make much sense.
Instead of changing the default for !SMP, fix this by making the feature
depend on SMP, with an override for compile-testing. Note that its sole
selector (NO_HZ_FULL) already depends on SMP.
This decreases kernel size for a default uniprocessor kernel by ca. 1 KiB.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 2c43838c99d9d23f ("sched/isolation: Enable CONFIG_CPU_ISOLATION=y by default")
Link: http://lkml.kernel.org/r/1514891590-20782-1-git-send-email-geert@linux-m68k.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Andy Shevchenko [Thu, 28 Dec 2017 12:25:23 +0000 (14:25 +0200)]
x86/platform/intel-mid: Revert "Make 'bt_sfi_data' const"
So one of the constification patches unearthed a type casting fragility
of the underlying code:
276c87054751 ("x86/platform/intel-mid: Make 'bt_sfi_data' const")
converted the struct to be const while it is also used as a temporary
container for important data that is used to fill 'parent' and 'name'
fields in struct platform_device_info.
The compiler doesn't notice this due to an explicit type cast that loses
the const - which fragility will be fixed separately.
This type cast turned a seemingly trivial const propagation patch into a
hard to debug data corruptor and crasher bug.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Bhumika Goyal <bhumirks@gmail.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: julia.lawall@lip6.fr
Cc: platform-driver-x86@vger.kernel.org
Link: http://lkml.kernel.org/r/20171228122523.21802-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Rafael J. Wysocki [Wed, 3 Jan 2018 11:49:29 +0000 (12:49 +0100)]
platform/x86: wmi: Call acpi_wmi_init() later
Calling acpi_wmi_init() at the subsys_initcall() level causes ordering
issues to appear on some systems and they are difficult to reproduce,
because there is no guaranteed ordering between subsys_initcall()
calls, so they may occur in different orders on different systems.
In particular, commit
86d9f48534e8 (mm/slab: fix kmemcg cache
creation delayed issue) exposed one of these issues where genl_init()
and acpi_wmi_init() are both called at the same initcall level, but
the former must run before the latter so as to avoid a NULL pointer
dereference.
For this reason, move the acpi_wmi_init() invocation to the
initcall_sync level which should still be early enough for things
to work correctly in the WMI land.
Link: https://marc.info/?t=151274596700002&r=1&w=2
Reported-by: Jonathan McDowell <noodles@earth.li>
Reported-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Tested-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Ingo Molnar [Mon, 8 Jan 2018 16:27:19 +0000 (17:27 +0100)]
locking/lockdep: Remove cross-release leftovers
There's two cross-release leftover facilities:
- the crossrelease_hist_*() irq-tracing callbacks (NOPs currently)
- the complete_release_commit() callback (NOP as well)
Remove them.
Cc: David Sterba <dsterba@suse.com>
Cc: Byungchul Park <byungchul.park@lge.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
David Sterba [Mon, 8 Jan 2018 15:27:31 +0000 (16:27 +0100)]
locking/Documentation: Remove stale crossrelease_fullstack parameter
The cross-release lockdep functionality has been removed in:
e966eaeeb623: ("locking/lockdep: Remove the cross-release locking checks")
... leaving the kernel parameter docs behind. The code handling
the parameter does not exist so this is a plain documentation change.
Signed-off-by: David Sterba <dsterba@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: byungchul.park@lge.com
Cc: linux-doc@vger.kernel.org
Link: http://lkml.kernel.org/r/20180108152731.27613-1-dsterba@suse.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Takashi Iwai [Mon, 8 Jan 2018 13:03:53 +0000 (14:03 +0100)]
ALSA: pcm: Allow aborting mutex lock at OSS read/write loops
PCM OSS read/write loops keep taking the mutex lock for the whole
read/write, and this might take very long when the exceptionally high
amount of data is given. Also, since it invokes with mutex_lock(),
the concurrent read/write becomes unbreakable.
This patch tries to address these issues by replacing mutex_lock()
with mutex_lock_interruptible(), and also splits / re-takes the lock
at each read/write period chunk, so that it can switch the context
more finely if requested.
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Nick Desaulniers [Sat, 6 Jan 2018 21:39:48 +0000 (13:39 -0800)]
x86: xen: remove the use of VLAIS
Variable Length Arrays In Structs (VLAIS) is not supported by Clang, and
frowned upon by others.
https://lkml.org/lkml/2013/9/23/500
Here, the VLAIS was used because the size of the bitmap returned from
xen_mc_entry() depended on possibly (based on kernel configuration)
runtime sized data. Rather than declaring args as a VLAIS then calling
sizeof on *args, we calculate the appropriate sizeof args manually.
Further, we can get rid of the #ifdef's and rely on num_possible_cpus()
(thanks to a helpful checkpatch warning from an earlier version of this
patch).
Suggested-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Nick Desaulniers <nick.desaulniers@gmail.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Nick Desaulniers [Sun, 24 Dec 2017 02:50:13 +0000 (21:50 -0500)]
x86/xen/time: fix section mismatch for xen_init_time_ops()
The header declares this function as __init but is defined in __ref
section.
Signed-off-by: Nick Desaulniers <nick.desaulniers@gmail.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Takashi Iwai [Mon, 8 Jan 2018 12:58:31 +0000 (13:58 +0100)]
ALSA: pcm: Abort properly at pending signal in OSS read/write loops
The loops for read and write in PCM OSS emulation have no proper check
of pending signals, and they keep processing even after user tries to
break. This results in a very long delay, often seen as RCU stall
when a huge unprocessed bytes remain queued. The bug could be easily
triggered by syzkaller.
As a simple workaround, this patch adds the proper check of pending
signals and aborts the loop appropriately.
Reported-by: syzbot+993cb4cfcbbff3947c21@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Jani Nikula [Mon, 8 Jan 2018 11:30:08 +0000 (13:30 +0200)]
Merge tag 'gvt-fixes-2018-01-08' of https://github.com/intel/gvt-linux into drm-intel-fixes
gvt-fixes-2018-01-08
- clear shadow entry for post-sync (Zhi)
- fix stack out-of-bound warning in cmd parser (Changbin)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180108061130.ucwtumhpbfbu4psu@zhen-hp.sh.intel.com
Changbin Du [Thu, 21 Dec 2017 02:29:32 +0000 (10:29 +0800)]
drm/i915/gvt: Fix stack-out-of-bounds bug in cmd parser
for_each_set_bit() only accepts variable of type unsigned long, and we can
not cast it from smaller types.
[ 16.499365] ==================================================================
[ 16.506655] BUG: KASAN: stack-out-of-bounds in find_first_bit+0x1d/0x70
[ 16.513313] Read of size 8 at addr
ffff8803616cf510 by task systemd-udevd/180
[ 16.521998] CPU: 0 PID: 180 Comm: systemd-udevd Tainted: G U O 4.15.0-rc3+ #14
[ 16.530317] Hardware name: Dell Inc. OptiPlex 7040/0Y7WYT, BIOS 1.2.8 01/26/2016
[ 16.537760] Call Trace:
[ 16.540230] dump_stack+0x7c/0xbb
[ 16.543569] print_address_description+0x6b/0x290
[ 16.548306] kasan_report+0x28a/0x370
[ 16.551993] ? find_first_bit+0x1d/0x70
[ 16.555858] find_first_bit+0x1d/0x70
[ 16.559625] intel_gvt_init_cmd_parser+0x127/0x3c0 [i915]
[ 16.565060] ? __lock_is_held+0x8f/0xf0
[ 16.568990] ? intel_gvt_clean_cmd_parser+0x10/0x10 [i915]
[ 16.574514] ? __hrtimer_init+0x5d/0xb0
[ 16.578445] intel_gvt_init_device+0x2c3/0x690 [i915]
[ 16.583537] ? unregister_module_notifier+0x20/0x20
[ 16.588515] intel_gvt_init+0x89/0x100 [i915]
[ 16.592962] i915_driver_load+0x1992/0x1c70 [i915]
[ 16.597846] ? __i915_printk+0x210/0x210 [i915]
[ 16.602410] ? wait_for_completion+0x280/0x280
[ 16.606883] ? lock_downgrade+0x2c0/0x2c0
[ 16.610923] ? __pm_runtime_resume+0x46/0x90
[ 16.615238] ? acpi_dev_found+0x76/0x80
[ 16.619162] ? i915_pci_remove+0x30/0x30 [i915]
[ 16.623733] local_pci_probe+0x74/0xe0
[ 16.627518] pci_device_probe+0x208/0x310
[ 16.631561] ? pci_device_remove+0x100/0x100
[ 16.635871] ? __list_add_valid+0x29/0xa0
[ 16.639919] driver_probe_device+0x40b/0x6b0
[ 16.644223] ? driver_probe_device+0x6b0/0x6b0
[ 16.648696] __driver_attach+0x11d/0x130
[ 16.652649] bus_for_each_dev+0xe7/0x160
[ 16.656600] ? subsys_dev_iter_exit+0x10/0x10
[ 16.660987] ? __list_add_valid+0x29/0xa0
[ 16.665028] bus_add_driver+0x31d/0x3a0
[ 16.668893] driver_register+0xc6/0x170
[ 16.672758] ? 0xffffffffc0ad8000
[ 16.676108] do_one_initcall+0x9c/0x206
[ 16.679984] ? initcall_blacklisted+0x150/0x150
[ 16.684545] ? do_init_module+0x35/0x33b
[ 16.688494] ? kasan_unpoison_shadow+0x31/0x40
[ 16.692968] ? kasan_kmalloc+0xa6/0xd0
[ 16.696743] ? do_init_module+0x35/0x33b
[ 16.700694] ? kasan_unpoison_shadow+0x31/0x40
[ 16.705168] ? __asan_register_globals+0x82/0xa0
[ 16.709819] do_init_module+0xe7/0x33b
[ 16.713597] load_module+0x4481/0x4ce0
[ 16.717397] ? module_frob_arch_sections+0x20/0x20
[ 16.722228] ? vfs_read+0x13b/0x190
[ 16.725742] ? kernel_read+0x74/0xa0
[ 16.729351] ? get_user_arg_ptr.isra.17+0x70/0x70
[ 16.734099] ? SYSC_finit_module+0x175/0x1b0
[ 16.738399] SYSC_finit_module+0x175/0x1b0
[ 16.742524] ? SYSC_init_module+0x1e0/0x1e0
[ 16.746741] ? __fget+0x157/0x240
[ 16.750090] ? trace_hardirqs_on_thunk+0x1a/0x1c
[ 16.754747] entry_SYSCALL_64_fastpath+0x23/0x9a
[ 16.759397] RIP: 0033:0x7f8fbc837499
[ 16.762996] RSP: 002b:
00007ffead76c138 EFLAGS:
00000246 ORIG_RAX:
0000000000000139
[ 16.770618] RAX:
ffffffffffffffda RBX:
0000000000000012 RCX:
00007f8fbc837499
[ 16.777800] RDX:
0000000000000000 RSI:
000056484e67b080 RDI:
0000000000000012
[ 16.784979] RBP:
00007ffead76b140 R08:
0000000000000000 R09:
0000000000000021
[ 16.792164] R10:
0000000000000012 R11:
0000000000000246 R12:
000056484e67b460
[ 16.799345] R13:
00007ffead76b120 R14:
0000000000000005 R15:
0000000000000000
[ 16.808052] The buggy address belongs to the page:
[ 16.812876] page:
00000000dc4b8c1e count:0 mapcount:0 mapping: (null) index:0x0
[ 16.820934] flags: 0x17ffffc0000000()
[ 16.824621] raw:
0017ffffc0000000 0000000000000000 0000000000000000 00000000ffffffff
[ 16.832416] raw:
ffffea000d85b3e0 ffffea000d85b3e0 0000000000000000 0000000000000000
[ 16.840208] page dumped because: kasan: bad access detected
[ 16.847318] Memory state around the buggy address:
[ 16.852143]
ffff8803616cf400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 16.859427]
ffff8803616cf480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1
[ 16.866708] >
ffff8803616cf500: f1 f1 04 f4 f4 f4 f3 f3 f3 f3 00 00 00 00 00 00
[ 16.873988] ^
[ 16.877770]
ffff8803616cf580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 16.885042]
ffff8803616cf600: 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1
[ 16.892312] ==================================================================
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Christoph Hellwig [Thu, 4 Jan 2018 17:35:03 +0000 (18:35 +0100)]
riscv: rename SR_* constants to match the spec
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Christoph Hellwig [Thu, 4 Jan 2018 17:35:02 +0000 (18:35 +0100)]
riscv: remove CONFIG_MMU ifdefs
The RISC-V port doesn't suport a nommu mode, so there is no reason
to provide some code only under a CONFIG_MMU ifdef.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Palmer Dabbelt [Wed, 27 Dec 2017 03:11:22 +0000 (19:11 -0800)]
RISC-V: Make __NR_riscv_flush_icache visible to userspace
We were hoping to avoid making this visible to userspace, but it looks
like we're going to have to because QEMU's user-mode emulation doesn't
want to emulate a vDSO. Having vDSO-only system calls was a bit
unothodox anyway, so I think in this case it's OK to just make the
actual system call number public.
This patch simply moves the definition of __NR_riscv_flush_icache
availiable to userspace, which results in the deletion of the now empty
vdso-syscalls.h.
Changes since v1:
* I've moved the definition into uapi/asm/syscalls.h rathen than
uapi/asm/unistd.h. This allows me to keep asm/unistd.h, so we can
keep the syscall table macros sane.
* As a side effect of the above, this no longer disables all system
calls on RISC-V. Whoops!
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
projects / openwrt / staging / blogic.git / log