John Crispin [Tue, 14 Jul 2015 07:44:14 +0000 (07:44 +0000)]
ubox: update to latest git HEAD
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 46356
John Crispin [Tue, 14 Jul 2015 07:43:50 +0000 (07:43 +0000)]
toolchain: fix gcc 4.6 build with gcc5
build error:
cfns.gperf:101:1: error: 'gnu_inline' attribute present on 'libc_name_p'
cfns.gperf:26:14: error: but not here
observed on Arch Linux
affected versions gcc 4.6, gcc 4.7
reported & fixed in DragonFlyBSD issue #136
https://github.com/DragonFlyBSD/DPorts/issues/136
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 46355
John Crispin [Tue, 14 Jul 2015 07:43:33 +0000 (07:43 +0000)]
gemini: switch to 4.1
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 46354
John Crispin [Tue, 14 Jul 2015 07:43:10 +0000 (07:43 +0000)]
gemini: add 4.1 support
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 46353
John Crispin [Tue, 14 Jul 2015 07:42:18 +0000 (07:42 +0000)]
gemini: add NAS packages to Raidsonic profile
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 46352
John Crispin [Tue, 14 Jul 2015 07:41:43 +0000 (07:41 +0000)]
gemini: copy kernel image to BIN_DIR
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 46351
John Crispin [Tue, 14 Jul 2015 07:41:19 +0000 (07:41 +0000)]
ramips: added led support for wrtnode board
This syncs the dts file with the one provided by the wrtnode team:
https://github.com/WRTnode/openwrt-patches/blob/master/R41508/wrtnode_factory_firmware_dts.patch
Signed-off-by: Christian Mehlis <christian@m3hlis.de>
SVN-Revision: 46350
John Crispin [Tue, 14 Jul 2015 07:40:22 +0000 (07:40 +0000)]
ramips: adding support for OY-0001 Wireless Router
Adding support for OY-0001 Wireless Router.
OY-0001 is a wireless router made by oyewifi.com. Below is the details:
MT7620A, 128MB DDR2, 16MB FLASH, SD Slot, USB 2.0, 4 x LAN + 1 x WAN.
Signed-off-by: Tom Deng <2579131212@qq.com>
SVN-Revision: 46349
John Crispin [Tue, 14 Jul 2015 07:39:19 +0000 (07:39 +0000)]
ramips: mt7620 ArcherC20i USB support
USB port of TP-Link Archer C20i does not work with trunk and CC.
This patch adds two nodes (ehci and ohci) to the device tree enabling USB.
Signed-off-by: Gunnar Thorburn <gunnar@thorburn.se>
SVN-Revision: 46348
John Crispin [Tue, 14 Jul 2015 07:39:10 +0000 (07:39 +0000)]
brcm2708: Implement sysupgrade
Implement sysupgrade for Raspberry Pi, similar to the way it is done on x86:
The config files are saved in the boot partition and moved to where they are
normally expected in preinit.
Also add optional gzip compression for the SD card image, since this can save
a lot of space (76M vs 6M), also similar to x86.
Signed-off-by: Bruno Randolf <br1@einfach.org>
SVN-Revision: 46347
John Crispin [Tue, 14 Jul 2015 07:38:47 +0000 (07:38 +0000)]
kernel: fix build with CONFIG_MTD unset
Fixed typo in the patch provided by Hauke:
https://lists.openwrt.org/pipermail/openwrt-devel/2015-July/034274.html
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 46346
John Crispin [Tue, 14 Jul 2015 07:38:33 +0000 (07:38 +0000)]
generic: add missing symbol
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 46345
John Crispin [Tue, 14 Jul 2015 07:37:29 +0000 (07:37 +0000)]
brcm2708: add DT support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 46344
John Crispin [Tue, 14 Jul 2015 07:37:14 +0000 (07:37 +0000)]
brcm2708-gpu-fw: update to latest version
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 46343
John Crispin [Tue, 14 Jul 2015 07:37:03 +0000 (07:37 +0000)]
ar71xx: add support for the devolo dLAN pro 1200+ WiFi ac
Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>
SVN-Revision: 46342
John Crispin [Tue, 14 Jul 2015 07:35:59 +0000 (07:35 +0000)]
base-files: added option to configure the gpio led trigger in uci-defaults
Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>
SVN-Revision: 46341
John Crispin [Tue, 14 Jul 2015 07:35:45 +0000 (07:35 +0000)]
mac80211: make ath10k firmware v2 selectable
Added option for old firmware version (10.1 API v2). It seems that recent
firmware versions are constantly crashing (at least on a QCA9880-BR4A-R) and
this provides the option to select an older version instead.
Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>
SVN-Revision: 46340
John Crispin [Tue, 14 Jul 2015 07:34:31 +0000 (07:34 +0000)]
ar71xx: add support to use gpio irqs
Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>
SVN-Revision: 46339
John Crispin [Tue, 14 Jul 2015 07:32:33 +0000 (07:32 +0000)]
ar71xx: add support for the devolo dLAN pro 500 Wireless+
Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>
SVN-Revision: 46338
Steven Barth [Mon, 13 Jul 2015 21:51:38 +0000 (21:51 +0000)]
odhcp6c: fix some more compatibility issues
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46335
Steven Barth [Mon, 13 Jul 2015 14:17:38 +0000 (14:17 +0000)]
odhcp6c: work-around more ISP DHCPv6-PD issues
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46317
Hauke Mehrtens [Sun, 12 Jul 2015 19:26:48 +0000 (19:26 +0000)]
x86: Make virtualization guests built for pentium4 with SMP
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
SVN-Revision: 46314
Felix Fietkau [Sun, 12 Jul 2015 18:54:30 +0000 (18:54 +0000)]
gcc: use the -sf suffix for musl ldso on powerpc
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46313
Hauke Mehrtens [Sun, 12 Jul 2015 13:47:16 +0000 (13:47 +0000)]
kernel: refresh patches on linux 3.18
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46308
Hauke Mehrtens [Sun, 12 Jul 2015 12:14:02 +0000 (12:14 +0000)]
sunxi: enable CONFIG_EXPERT
- only sunxi has this disabled
- unify kernel configuration across platforms
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 46307
Jonas Gorski [Sun, 12 Jul 2015 11:57:40 +0000 (11:57 +0000)]
ar7-atm: fix compilation for 4.1
Add the required changes to make it compile for 4.1 again.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46306
Jonas Gorski [Sun, 12 Jul 2015 11:57:04 +0000 (11:57 +0000)]
acx-mac80211: make it compile again against new compat-wireless
Update to "latest" HEAD and update it to match latest API changes.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46305
Hauke Mehrtens [Sun, 12 Jul 2015 10:51:28 +0000 (10:51 +0000)]
kernel: add missing config option
This should fix build of sunxi.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46304
Hauke Mehrtens [Sun, 12 Jul 2015 10:38:54 +0000 (10:38 +0000)]
mvebu: make patches apply against 3.18.18 again
commit r46299 broke the mvebu target because one patch does not apply
any more. This commit closes #20070.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46303
Hauke Mehrtens [Sat, 11 Jul 2015 20:55:36 +0000 (20:55 +0000)]
valgrind: update to 3.10.1 and fix kernel >= 4.0
This updates valgrind to version 3.10.1 and make configure work with
kernel version > 4.0. This patch was taken from upstream valgrind.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46302
Hauke Mehrtens [Sat, 11 Jul 2015 19:59:26 +0000 (19:59 +0000)]
kernel: update 4.1 to 4.1.2
Changelog:
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.2
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46301
Hauke Mehrtens [Sat, 11 Jul 2015 19:59:05 +0000 (19:59 +0000)]
kernel: update 4.0 to 4.0.8
Changelog:
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.0.8
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46300
Hauke Mehrtens [Sat, 11 Jul 2015 19:58:44 +0000 (19:58 +0000)]
kernel: update 3.18 to 3.18.18
Changelog:
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.18
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46299
Felix Fietkau [Fri, 10 Jul 2015 19:42:12 +0000 (19:42 +0000)]
toolchain/gdb: use expat library to be able to parse target machine definitions
Fixes gdbserver debugging with at least mvebu, possibly others
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46298
Felix Fietkau [Fri, 10 Jul 2015 19:42:05 +0000 (19:42 +0000)]
tools: add expat library (to be used by gdb)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46297
Felix Fietkau [Fri, 10 Jul 2015 19:42:00 +0000 (19:42 +0000)]
toolchain/gdb: update to 7.8, sync with target package version
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46296
Felix Fietkau [Fri, 10 Jul 2015 19:41:48 +0000 (19:41 +0000)]
ramips: collect rx related members to fe_rx_ring struct
Signed-off-by: michael lee <igvtee@gmail.com>
SVN-Revision: 46295
Felix Fietkau [Fri, 10 Jul 2015 19:41:42 +0000 (19:41 +0000)]
ramips: add xmit_more support
use pktgen to verify on rt3662. can improve transmit rate.
pkt_size 1500
burst 1 : 807Mb/sec
burst 8 : 984Mb/sec
pkt_size 60
burst 1 : 57Mb/sec
burst 8 : 236Mb/sec
Signed-off-by: michael lee <igvtee@gmail.com>
SVN-Revision: 46294
Felix Fietkau [Fri, 10 Jul 2015 11:36:49 +0000 (11:36 +0000)]
ebtables: fix miscompilation on 64bit targets
The musl build "fix" introduced in r45108 removed all netinet/ether.h
includes, which made the prototypes of ether_aton and ether_ntoa
unavailable. As a result, the compiler assumed they return int instead
of a pointer. This currupted the pointer on 64bit targets, causing ebtables
to segfault in commands containing MAC addresses.
Since r46161 made it possible to include both the kernel and the libc
if_ether.h as long as the libc version is included first, this patch
changes the fix to remove the linux/if_ether.h from the ebtables source
(so the fixed version from the kernel is used) and ensures netinet/ether.h
is included early.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 46292
Rafał Miłecki [Thu, 9 Jul 2015 18:03:39 +0000 (18:03 +0000)]
mac80211: add brcmfmac patch fixing user space picked MACs
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46288
Jo-Philipp Wich [Thu, 9 Jul 2015 13:04:27 +0000 (13:04 +0000)]
openssl: update to v1.0.2d (CVE-2015-1793)
During certificate verification, OpenSSL (starting from version 1.0.1n and
1.0.2b) will attempt to find an alternative certificate chain if the first
attempt to build such a chain fails. An error in the implementation of this
logic can mean that an attacker could cause certain checks on untrusted
certificates to be bypassed, such as the CA flag, enabling them to use a valid
leaf certificate to act as a CA and "issue" an invalid certificate.
This issue will impact any application that verifies certificates including
SSL/TLS/DTLS clients and SSL/TLS/DTLS servers using client authentication.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 46285
John Crispin [Thu, 9 Jul 2015 07:04:14 +0000 (07:04 +0000)]
ar71xx: compex wpe72 add space to include statement
Signed-off-by: Christian Mehlis <christian@m3hlis.de>
SVN-Revision: 46284
John Crispin [Thu, 9 Jul 2015 07:03:54 +0000 (07:03 +0000)]
ar71xx: compex wpj531 register usb support
Signed-off-by: Christian Mehlis <christian@m3hlis.de>
SVN-Revision: 46283
John Crispin [Thu, 9 Jul 2015 07:01:55 +0000 (07:01 +0000)]
ar71xx: compex wpj531 fix setting mac address on ethernet
Signed-off-by: Christian Mehlis <christian@m3hlis.de>
SVN-Revision: 46282
John Crispin [Thu, 9 Jul 2015 06:59:18 +0000 (06:59 +0000)]
ar71xx: compex wpj531 fix ethernet registration
In
fb6f62e97733312053ab593fcf68eea47a21169e several settings
are set on the ethernet device, but they are not working.
Fix Ethernet by setting the right values.
Signed-off-by: Christian Mehlis <christian@m3hlis.de>
SVN-Revision: 46281
John Crispin [Thu, 9 Jul 2015 06:57:39 +0000 (06:57 +0000)]
ar71xx: ag71xx remove IRQF_DISABLED
no-op since 2.6.35
removed in Kernel 4.1
see https://lwn.net/Articles/380931/
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 46280
John Crispin [Thu, 9 Jul 2015 06:56:45 +0000 (06:56 +0000)]
mpc85xx: Enable RFKill and USB Power GPIO Control for WDR4900v1
This patch adds the RFKill GPIO control switch and enables another GPIO to
control power supply to USB Ports by emulating an LED GPIO for WDR4900v1.
Signed-off-by: Guo Wei Lim <alphasparc@gmail.com>
SVN-Revision: 46279
Rafał Miłecki [Thu, 9 Jul 2015 06:09:50 +0000 (06:09 +0000)]
mac80211: try to workaround some brcmfmac bug with handling interfaces
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46278
Hauke Mehrtens [Wed, 8 Jul 2015 20:43:23 +0000 (20:43 +0000)]
kernel: modules: activate wpan on kernel 4.1
Make wpan depend on not kernel 3.18 so it will get activated on all
other kernel versions like 4.0 and 4.1.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46276
Felix Fietkau [Wed, 8 Jul 2015 15:59:38 +0000 (15:59 +0000)]
swconfig: swlib.c: Fix another memleak
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 46275
John Crispin [Wed, 8 Jul 2015 14:26:18 +0000 (14:26 +0000)]
ar71xx: fix board name ordering
r46248 added case statements in the same places
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 46274
John Crispin [Wed, 8 Jul 2015 14:26:12 +0000 (14:26 +0000)]
fstools: fstab.init fix spelling
fix a very minor typo in warning message
Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
SVN-Revision: 46273
John Crispin [Wed, 8 Jul 2015 14:26:04 +0000 (14:26 +0000)]
comgt: make ncm proto work via wwan proto
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 46272
John Crispin [Wed, 8 Jul 2015 14:25:52 +0000 (14:25 +0000)]
base-files: implemented basic GPIO control
Internal GPIO pins are used for PoE passthrough setups in multi-port
routers. This patch implemnets control over this hardware feature for
Ubiquiti Nanostations and TP-Link CPE510.
Signed-off-by: Lars Kruse <lists@sumpfralle.de>
SVN-Revision: 46271
John Crispin [Wed, 8 Jul 2015 14:25:45 +0000 (14:25 +0000)]
ar71xx: Fix LED-to-phy mapping for EnGenius ESR1750.
wlan5g is phy0tpt and wlan2g phy1tpt.
Signed-off-by: Christian Beier <cb@shoutrlabs.com>
SVN-Revision: 46270
John Crispin [Wed, 8 Jul 2015 14:25:36 +0000 (14:25 +0000)]
malta: add harddisk support
works with:
qemu-system-mipsel -M malta \
-hda openwrt-malta-le-root.ext4 \
-kernel openwrt-malta-le-vmlinux.elf \
-nographic -append "root=/dev/sda console=ttyS0"
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 46269
Felix Fietkau [Wed, 8 Jul 2015 12:06:16 +0000 (12:06 +0000)]
mpc85xx: disable SPE FPU support until musl gets support for it (fixes #19896)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46268
Felix Fietkau [Wed, 8 Jul 2015 12:06:03 +0000 (12:06 +0000)]
musl: add powerpc soft-float support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46267
Felix Fietkau [Wed, 8 Jul 2015 12:05:55 +0000 (12:05 +0000)]
musl: call a_crash() inside __stack_chk_fail_local instead of calling __stack_chk_fail
Fixes relocation errors on PowerPC
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46266
Felix Fietkau [Wed, 8 Jul 2015 08:20:44 +0000 (08:20 +0000)]
kernel: add missing config symbol (fixes #19880)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46265
Felix Fietkau [Wed, 8 Jul 2015 08:20:38 +0000 (08:20 +0000)]
kernel: add missing 4.1 config symbol
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46264
Rafał Miłecki [Wed, 8 Jul 2015 06:05:43 +0000 (06:05 +0000)]
nvram: get rid of NVRAM_SPACE
Now we support NVRAM whatever its size is.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46262
Rafał Miłecki [Wed, 8 Jul 2015 05:42:30 +0000 (05:42 +0000)]
nvram: fix displayed info about NVRAM size
Use actual partition size and content offset to calculate it.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46260
Felix Fietkau [Tue, 7 Jul 2015 22:44:28 +0000 (22:44 +0000)]
Revert "ar71xx: Allow to use ath79_gpio_output_select on QCA955x" (r46240)
It breaks the build
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46256
Steven Barth [Tue, 7 Jul 2015 22:32:38 +0000 (22:32 +0000)]
scripts/feeds: print the source of packages installed
Can be helpful in diagnosing unexpected package overlaps between
feeds/core.
Signed-off-by: Karl Palsson <karlp@remake.is>
SVN-Revision: 46255
Felix Fietkau [Tue, 7 Jul 2015 22:07:22 +0000 (22:07 +0000)]
mwlwifi: fix compile error after mac80211 update
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46254
Rafał Miłecki [Tue, 7 Jul 2015 22:06:04 +0000 (22:06 +0000)]
Revert "Revert "nvram: increase NVRAM size to 64 KiB""
This reverts commit r45579.
With the latest change r46251 ("nvram: fix "Segmentation fault" caused
by setting memory out of buffer") nvram utility shouldn't crash anymore.
It was tested on 3 brcm47xx devices:
1) Unknown with 0x10000 NVRAM size (0x8000 offset)
2) Linksys E1000 V2.1 with 0x10000 (0x8000 offset)
3) Linksys WRT300N V1 with 0x10000 (0x8000 offset)
And 3 bcm53xx devices:
1) Buffalo WZR-600DHP2 with 0x160000 NVRAM size
2) Buffalo WZR-1750DHP with 0x10000 NVRAM size
3) Netgear R6250 V1 with 0x180000 NVRAM size
(all using 0 offset)
This is an important change as it allows reading whole NVRAM. This may
critical when reading some basic configuration (e.g. switch ports).
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46253
Rafał Miłecki [Tue, 7 Jul 2015 21:21:49 +0000 (21:21 +0000)]
nvram: fix "Segmentation fault" caused by setting memory out of buffer
Some MTD partitions with NVRAM have content starting in the middle. In
such case offset is set and nvram_header returns pointer to the middle.
It means we have to respect offset when calculating remaining space.
By the way use real MTD partition size (nvram_part_size variable) as we
may want to bump NVRAM_SPACE in the (very near) future.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46251
John Crispin [Tue, 7 Jul 2015 18:06:39 +0000 (18:06 +0000)]
ar71xx: Add support for Cisco-Linksys WAP4410N
This patch adds support for the Cisco WAP4410N, an access point that uses the
AR9132 SoC. Web upgrades from stock are not yet possible, UART access required
for the initial flash.
Signed-off-by: Ryan A Young <rayoung@utexas.edu>
SVN-Revision: 46250
Steven Barth [Tue, 7 Jul 2015 17:30:08 +0000 (17:30 +0000)]
gdb: fix compilation for x86_64 with musl
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46249
John Crispin [Tue, 7 Jul 2015 13:48:39 +0000 (13:48 +0000)]
ar71xx: add support for D-Link DIR-615 rev. Ix board
Based on trunk r46212.
Signed-off-by: Jaehoon You <teslamint@gmail.com>
SVN-Revision: 46248
John Crispin [Tue, 7 Jul 2015 13:48:27 +0000 (13:48 +0000)]
mips: Free memory when load_module fails (#14453)
The mips reloc patch introduced new allocations which were done before
add_unformed_module but never freed them in case of an error. A new hook in
Linux 3.19 called module_arch_freeing_init can be used for freeing memory
which were allocated during this init phase.
The problem can be seen when trying to load a module (via busybox insmod)
when it was already loaded.
free -m
for i in `seq 1 100`; do
/sbin/insmod /lib/modules/*/ath9k.ko >& /dev/null
done
free -m
This simple loop would leak ~3.2 MB.
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 46247
John Crispin [Tue, 7 Jul 2015 13:48:17 +0000 (13:48 +0000)]
ubus: bump to latest git HEAD
fixes a bug where gid was checked twice instead of the uid/gid combo
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 46246
John Crispin [Tue, 7 Jul 2015 13:48:06 +0000 (13:48 +0000)]
mac80211: Drop ath10k workaround for providing calibration data
Ath10k has now a proper method of providing calibration data via
the kernel firmware API. This patch can be dropped as all boards
now use the proper method.
Signed-off-by: Matti Laakso <malaakso@elisanet.fi>
SVN-Revision: 46245
John Crispin [Tue, 7 Jul 2015 13:47:57 +0000 (13:47 +0000)]
ar71xx: Unify ath10k calibration data loading
Currently one board uses the "proper" way of providing firmware
with the name ath10k/cal-pci-<pci address>.bin, whereas other
boards patch board.bin template in preinit and rely on a custom
ath10k patch to use calibration data from the template.
This patch makes all boards use the first method.
Signed-off-by: Matti Laakso <malaakso@elisanet.fi>
SVN-Revision: 46244
John Crispin [Tue, 7 Jul 2015 13:47:51 +0000 (13:47 +0000)]
mac80211: ath9k: fix qca956x name also
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 46243
John Crispin [Tue, 7 Jul 2015 13:47:45 +0000 (13:47 +0000)]
kernel: move wpan to separate menu
bluetooth is separate from 802.11 entries too
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 46242
John Crispin [Tue, 7 Jul 2015 13:47:39 +0000 (13:47 +0000)]
ar71xx: Use *_eth_cfg helper for Open Mesh MR900 boards
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 46241
John Crispin [Tue, 7 Jul 2015 13:47:30 +0000 (13:47 +0000)]
ar71xx: Allow to use ath79_gpio_output_select on QCA955x
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 46240
John Crispin [Tue, 7 Jul 2015 13:47:23 +0000 (13:47 +0000)]
sysctl: read settings from /etc/sysctl.d/*.conf
This changes makes it possible to store custom settings
in individual files inside the directory /etc/sysctl.d/.
Signed-off-by: Stefan Tomanek <stefan.tomanek+openwrt@wertarbyte.de>
SVN-Revision: 46239
John Crispin [Tue, 7 Jul 2015 13:47:17 +0000 (13:47 +0000)]
ar71xx: add support for TL-WR741ND v5
This device is identical to the TL-WR740N v5, it even uses the same HWID (which
wasn't the case for older TL-WR741ND revisions).
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 46238
John Crispin [Tue, 7 Jul 2015 13:47:08 +0000 (13:47 +0000)]
generic: mtd backport for Spansion S25FL164K
Backport for the Spansion S25FL164K
It's a 8 MiB flash chip with 4 KiB erase sectors.
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
SVN-Revision: 46237
John Crispin [Tue, 7 Jul 2015 13:46:54 +0000 (13:46 +0000)]
ar71xx: Add Support for the Bitmain Antminer S3
This patch adds support for the Bitmain Antminer S3 Cryptocurrency Miner
http://wiki.openwrt.org/toh/bitmain/s3
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
SVN-Revision: 46236
John Crispin [Tue, 7 Jul 2015 13:46:44 +0000 (13:46 +0000)]
ar71xx: allow pci calibration fixup to work with ar9344
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 46235
John Crispin [Tue, 7 Jul 2015 13:46:38 +0000 (13:46 +0000)]
ar71xx: add support for ubnt rocket-m ti
rocket-m titanium is a device based on ar9344 with 802.11af poe.
It doesn't use the SoC wifi, instead it's using an ar9280 connected to
the pci bus. The gps version of the rocket-m ti is working, but
gps is untested. The gps is connected to the first serial port.
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 46234
John Crispin [Tue, 7 Jul 2015 13:46:26 +0000 (13:46 +0000)]
x86/xen_domu: enable image generation
Add features ext4 targz to target x86/xen_domu in order to
generate images in defconfig.
This fixes #18074.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
SVN-Revision: 46233
John Crispin [Tue, 7 Jul 2015 13:46:16 +0000 (13:46 +0000)]
swconfig: swlib.c: free name and description of attributes
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
SVN-Revision: 46232
John Crispin [Tue, 7 Jul 2015 13:46:05 +0000 (13:46 +0000)]
swconfig: swlib.c: free portmaps in swlib_free()
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
SVN-Revision: 46231
John Crispin [Tue, 7 Jul 2015 13:45:56 +0000 (13:45 +0000)]
swconfig: swlib.c: remove const qualifier for val.s since this is supposed to be free'd
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
SVN-Revision: 46230
John Crispin [Tue, 7 Jul 2015 13:45:44 +0000 (13:45 +0000)]
swconfig: swlib.c: free device name and alias
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
SVN-Revision: 46229
John Crispin [Tue, 7 Jul 2015 13:45:37 +0000 (13:45 +0000)]
ar71xx: Enable sysupgrade on the Bitmain Antminer S1
This patch enables sysupgrade for the Bitmain Antminer S1
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
SVN-Revision: 46228
John Crispin [Tue, 7 Jul 2015 13:45:30 +0000 (13:45 +0000)]
ar71xx: Fix WAN port location on EnGenius ESR1750 and EPG5000.
The designated blue WAN port on both devices has index 5, not 1.
Signed-off-by: Christian Beier <cb@shoutrlabs.com>
SVN-Revision: 46227
John Crispin [Tue, 7 Jul 2015 13:45:20 +0000 (13:45 +0000)]
ar71xx: add LED defaults for the EnGenius EPG5000
NB that wlan5g is phy0tpt and wlan2g phy1tpt.
Signed-off-by: Christian Beier <cb@shoutrlabs.com>
SVN-Revision: 46226
John Crispin [Tue, 7 Jul 2015 13:45:10 +0000 (13:45 +0000)]
uboot-lantiq: Add support for Arcadyan ARV8539PW22 (Speedport W 504V)
uboot-lantiq: Add support for Arcadyan ARV8539PW22 (Speedport W 504V)
Signed-off-by: Jannis Pinter <jannis@pinterjann.is>
SVN-Revision: 46225
John Crispin [Tue, 7 Jul 2015 13:44:58 +0000 (13:44 +0000)]
lantiq: Add support for Arcadyan ARV8539PW22 (Speedport W 504V)
lantiq: Add support for Arcadyan ARV8539PW22 (Speedport W 504V)
Signed-off-by: Jannis Pinter <jannis@pinterjann.is>
SVN-Revision: 46224
John Crispin [Tue, 7 Jul 2015 13:44:53 +0000 (13:44 +0000)]
lantiq: Add support for the BT Home Hub 5A
u-boot support depends on the next "upstream" version ([0]) from
Daniel Schwierzeck.
Since the installation process is quite complicated a "how to" was
added to the wiki: [1]
[0] https://github.com/danielschwierzeck/u-boot-lantiq/tree/openwrt/v2014.01-next
[1] http://wiki.openwrt.org/toh/bt/homehub_v5a
V2: Use the correct PCI interrupt (fixes 2.4GHz wifi)
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 46223
John Crispin [Tue, 7 Jul 2015 13:44:37 +0000 (13:44 +0000)]
lantiq: Silence the printk when a PCIe error interrupt arrives
Basically the only error I am seeing is "Correctable Error". Also newer
lantiq PCIe drivers have this message wrapped in a "if debug enabled"
block. So it should be safe to disable this warning.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 46222
John Crispin [Tue, 7 Jul 2015 13:44:32 +0000 (13:44 +0000)]
lantiq: Make the MEI address available for kernel drivers
Newer DSL driver versions depend on the address information.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 46221
John Crispin [Tue, 7 Jul 2015 13:44:27 +0000 (13:44 +0000)]
generic: Allow configuring an increment with mtd-mac-address
This is useful if the device also has an ethernet WAN interface with a
separate mac address (that is derived from the LAN mac address).
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 46220
John Crispin [Tue, 7 Jul 2015 13:44:12 +0000 (13:44 +0000)]
lantiq: Change the data-type of mac address in ETOP driver
Make it consistent with the net_device struct and the xrx200 driver
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 46219
projects / openwrt / staging / jow.git / log