drm/amdgpu: fix GFXOFF on Picasso and Raven2

For picasso(adev->pdev->device == 0x15d8)&raven2(adev->rev_id >= 0x8),
firmware is sufficient to support gfxoff.
In commit 98f58ada2d37e, for picasso&raven2,
return directly and cause gfxoff disabled.

Fixes: 98f58ada2d37 ("drm/amdgpu/gfx9: update pg_flags after determining if gfx off is possible")
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: remove meaningless descending into amd/amdkfd/

Since commit 04d5e2765802 ("drm/amdgpu: Merge amdkfd into amdgpu"),
drivers/gpu/drm/amd/amdkfd/Makefile does not contain any syntax that
is understood by the build system.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add APTX quirk for Dell Latitude 5495

Needs ATPX rather than _PR3 to really turn off the dGPU. This can save
~5W when dGPU is runtime-suspended.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove unused function setFieldWithMask

After commit a9f54ce3c603 ("drm/amd/display: Refactoring VTEM"),
there is no caller in tree.

Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: correct the pp_feature output on Arcturus

Fix for the commit below:
drm/amd/powerplay: implment sysfs feature status function in smu

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: correct Vega20 dpm level related settings

Correct the settings for auto mode and skip the unnecessary
settings for dcefclk and fclk.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Vega20 SMU I2C HW engine controller.

Implement HW I2C enigne controller to be used by the RAS EEPROM
table manager. This is based on code from ATITOOLs.

v2:
Rename the file and all function prefixes to smu_v11_0_i2c

By Luben's observation always fill the TX fifo to full so
we don't have garbadge interpreted by the slave as valid data.

v3:
Remove preemption disable as the HW I2C controller will not
stop the clock on empty TX fifo and so it's not critical to
keep not empty queue.
Switch to fast mode 400 khz SCL clock for faster read and write.

v5:
Restore clock gating before releasing I2C bus and fix some
style comments.

v6:
squash in warning fix, fix includes (Alex)

Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Luben Tuikov <Luben.Tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: Add interface to lock SMU HW I2C.

v2:
PPSMC_MSG_RequestI2CBus seems not to work and so to avoid conflict
over I2C bus and engine disable thermal control access to
force SMU stop using the I2C bus until the issue is reslolved.

Expose and call vega20_is_smc_ram_running to skip locking when SMU
FW is not yet loaded.

v3:
Remove the prevoius hack as the SMU found the bug.

v5: Typo fix

Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: Import smuio_11_0 headers for EEPROM access on Vega20

v3: Merge CKSVII2C_IC regs into exsisting headers.

Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add RAS EEPROM table.

Add RAS EEPROM table manager to eanble RAS errors to be stored
upon appearance and retrived on driver load.

v2: Fix some prints.

v3:
Fix checksum calculation.
Make table record and header structs packed to do correct byte value sum.
Fix record crossing EEPROM page boundry.

v4:
Fix byte sum val calculation for record - look at sizeof(record).
Fix some style comments.

v5: Add description to EEPROM_TABLE_RECORD_SIZE and syntax fixes.

Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Luben Tuikov <Luben.Tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amdgpu: free up the first paging queue v2"

This reverts commit 4f8bc72fbf10f2dc8bca74d5da08b3a981b2e5cd.

It turned out that a single reserved queue wouldn't be
sufficient for page fault handling.

Signed-off-by: Gang Ba <gaba@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/display: fix build error without CONFIG_DRM_AMD_DC_DSC_SUPPORT

If CONFIG_DRM_AMD_DC_DSC_SUPPORT is not set, build fails:

drivers/gpu/drm/amd/amdgpu/../display/dc/dcn20/dcn20_hwseq.c: In function dcn20_hw_sequencer_construct:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn20/dcn20_hwseq.c:2099:28:
 error: dcn20_dsc_pg_control undeclared (first use in this function); did you mean dcn20_dpp_pg_control?
  dc->hwss.dsc_pg_control = dcn20_dsc_pg_control;
                            ^~~~~~~~~~~~~~~~~~~~
                            dcn20_dpp_pg_control

Use CONFIG_DRM_AMD_DC_DSC_SUPPORT to guard this.

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 8a31820b1218 ("drm/amd/display: Make init_hw and init_pipes generic for seamless boot")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: Fix an off by one in navi10_get_smu_msg_index()

The navi10_message_map[] array has SMU_MSG_MAX_COUNT elements so the ">"
has to be changed to ">=" to prevent reading one element beyond the end
of the array.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix error message

Since reservation_object_wait_timeout_rcu is called with
interruptable set to false it's wrong to say
'or interrupted' in the error message.

Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add dummy read for some GCVM status registers

The GRBM register interface is now capable of bursting 1 cycle per
register wr->wr, wr->rd much faster than previous muticycle per
transaction done interface.  This has caused a problem where status
registers requiring HW to update have a 1 cycle delay, due to the
register update having to go through GRBM.

SW may operate on an incorrect value if they write a register and
immediately check the corresponding status register.

Registers requiring HW to clear or set fields may be delayed by 1 cycle.
For example,

1. write VM_INVALIDATE_ENG0_REQ mask = 5a
2. read VM_INVALIDATE_ENG0_ACK till the ack is same as the request mask = 5a
    a. HW will reset VM_INVALIDATE_ENG0_ACK = 0 until invalidation is complete
3. write VM_INVALIDATE_ENG0_REQ mask = 5a
4. read VM_INVALIDATE_ENG0_ACK till the ack is same as the request mask = 5a
    a. First read of VM_INVALIDATE_ENG0_ACK = 5a instead of 0
    b. Second read of VM_INVALIDATE_ENG0_ACK = 0 because
       the remote GRBM h/w register takes one extra cycle to be cleared
    c. In this case, SW will see a false ACK if they exit on first read

Affected registers (only GC variant)  |  Recommended Dummy Read
--------------------------------------+----------------------------
VM_INVALIDATE_ENG*_ACK                |  VM_INVALIDATE_ENG*_REQ
VM_L2_STATUS                          |  VM_L2_STATUS
VM_L2_PROTECTION_FAULT_STATUS         |  VM_L2_PROTECTION_FAULT_STATUS
VM_L2_PROTECTION_FAULT_ADDR_HI/LO32   |  VM_L2_PROTECTION_FAULT_ADDR_HI/LO32
VM_L2_IH_LOG_BUSY                     |  VM_L2_IH_LOG_BUSY
MC_VM_L2_PERFCOUNTER_HI/LO            |  MC_VM_L2_PERFCOUNTER_HI/LO
ATC_L2_PERFCOUNTER_HI/LO              |  ATC_L2_PERFCOUNTER_HI/LO
ATC_L2_PERFCOUNTER2_HI/LO             |  ATC_L2_PERFCOUNTER2_HI/LO

Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.48

Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: flicking observed while installing driver on Navi10 CF

[WHY] value of dchub_ref_clock is decided by dchubbub global timer
settings which is programmed by vbios command table disp_init.
for multi-GPU case, vbios is posted only for primary GPU. without
vbios posted for the secondary GPU, value of dchub_ref_clock is not
set properly. this value will affect dcn bandwidth calcuation and
cause underflow. user will see screen flicking during driver
installation for dual GPU case.

[HOW] dc init_hw always call vbios command table disp_init to
make sure dchubbub global timer is configured and enable.

Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Properly read LVTMA_PWRSEQ_CNTL

[Why]
The register LVTMA_PWRSEQ_CNTL is used to determine the power state of the
embedded display. Currently we do not actually read this register's values,
so during power down we think that this display is already off, so we skip
calling into VBIOS to actually turn it off.

[How]
 - add relevant fields to shift / mask initialization

Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: revert wait in pipelock

[why]
Previous workaround to prevent a vsync flip to be converted
to immediate flip is no longer needed, and is risky because
there are cases where it can result in infinite loop.

[how]
Remove wait loop (which is potentially infinite) before locking
pipe

Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Use res_cap to acquire i2c instead of pipe count

[Why]
We should be using the ddc_num from res_caps. As the
pipe count != number of i2c resources.

[How]
Use ddc_num from res_cap instead of pipe count.

Signed-off-by: Derek Lai <Derek.Lai@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Expose OTG_V_TOTAL_MID for HW Diags

[Why]
Existing HW Features, HW Diags test requested that the
registers be exposed.

[How]
Add V_TOTAL_MID to existing DC structures.
Make sure values are passed down throughout DC
Add Register definition.
Program the additional registers
Add additional Logic for V_TOTAL_CONTROL.

Signed-off-by: Bayan Zabihiyan <bayan.zabihiyan@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix DML not calculating delivery time

[why]
Calculating DCFCLK DS time requires calculating
delivery time for luma/chroma, but this value is
not calculated in DMLv2, it was inadvertently
removed when porting DMLv2

[how]
Add the calculation back

Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: MST topology debugfs

DRM provides drm_dp_mst_dump_topology, which prints
useful information about MST devices

Hook this up to a debugfs file named amdgpu_mst_topology

Signed-off-by: David Francis <David.Francis@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: set av_mute in hw_init for HDMI

[Description]
OS will reserve HW state in UEFI mode.
Driver init_hw reset to RGB which caused HDMI green in YCbCr mode.
read HW blank_color based on acc_mode.

Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add Logging for Gamma Related information

[Why]
A recent bug showed that logging would be useful in debugging
various gamma issues.

[How]
Add logging in dc.
Fix formatting for easier graphing.

Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Enable HW rotation

[Why] HW rotation is not enabled. Calculations for cursor rotation
are wrong for the values passed to set_cursor_position.

[How] Swap Src rect and height and vertically mirror surface for
the correct surface rotation direction. Cursor position is rotated
according to angle. Offset calculations are tweaked for non-rotated
cursor hotspot and width/height.

Signed-off-by: Jaehyun Chung <jaehyun.chung@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add Cursor Degamma logic for DCN2

[Why]
We need to have the ability to to tell us set degamma on the cursor.

[How]
Pass a flag down to register programming that tells us if the
current surface format needs cursor degamma.

Signed-off-by: Bayan Zabihiyan <bayan.zabihiyan@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix odm validation

Update bw validation to use prev and next odm pipe pointers
for populating dml inputs.

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix odm stream release

Need to memset all odm pipes when calling dc_remove_stream_from_ctx

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix dcn20 odm dpp programming

dcn20 requires special casing for odm.
This change treats odm as alternative to mpc tree on dcn20.

This is planned to be fixed in a future refactor

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix number of slices not being checked for dsc

[why]
num_slices_h was not being checked

[How]
Fix the typo and check num_slices_h

Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix odm pipe copy

ODM next and prev pipe were missing from dc_copy_state

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix trigger not generated for freesync

[Why]
In newer hardware MANUAL_FLOW_CONTROL is not a trigger bit. Due to this
front porch is fixed and in these hardware freesync does not work.

[How]
Change the programming to generate a pulse so that the event will be
triggered, front porch will be cut short and freesync will work.

Signed-off-by: Yogesh Mohan Marimuthu <yogesh.mohanmarimuthu@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix stuck test pattern on right half of display

[why]
With visual confirm enabled, displays where ODM combine is enabled
has a test pattern stuck on the right half of the display even
though the display is unblanked.

[how]
Add a condition to not show the colour ramp test pattern when the
display is unblanked.

Signed-off-by: Zi Yu Liao <ziyu.liao@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: support spdif

[Description]
port spdif fix to staging:
 spdif hardwired to afmt inst 1.
 spdif func pointer
 spdif resource allocation (reserve last audio endpoint for spdif only)

Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Refactoring VTEM

[Why]
Video Timing Extended Metadata packet (VTEM) is not
specific to freesync. So move it out of freesync module

[How]
- Moved VTEM from freesync module to info_packet module
- Created new structure for VTEM parameters that can be used for VRR
and FVA

Signed-off-by: Ahmad Othman <ahmad.othman@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Ahmad Othman <Ahmad.Othman@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.47

Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove unused function

[Why]
This function is not being used, it was left in
when introducing DCN2

[How]
Remove the function

Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: cleaned up coding error in init_hw

[why]
during a refactor a redundant code that has unknown behaviour was added.

[how]
removed old bad code

Fixes: 8a31820b1218 ("drm/amd/display: Make init_hw and init_pipes generic for seamless boot")
Signed-off-by: Martin Leung <martin.leung@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add VM page fault handle implementation

[How] Allocate memory for default page and program memory block addr
into default page addr register.

Signed-off-by: Jaehyun Chung <jaehyun.chung@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: refactor Device ID for external chips

IEEE OUI will now be used while referring to certain vendors.
instead of normal index

Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Zero-out dsc init regs

[why]
Before a statically allocated PPS data structure, that did
get zeroed-out at startup, had been re-used for making packed PPS
SDP. With S3 fix, using a non-initialized PPS data structure was
introduced, while wrongly assuming it'd get initialized before it's
populated. As a consequence 'vbr_enable' and perhaps some other
fields are left uninitialized when making packed PPS SDP. This can
affect 'simple_422' as well because of the way PPS SDP packing is
done (the fields are not masked first, only shifted). The behavior
will be different, depending on the content of uninitialized data.

[how]
Zero-out PPS data structure at initialization time before it's
populated

Fixes: 1a9e3d4569fc ("drm/amd/display: Set DSC before DIG front-end is connected to its back-end")
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Implement voltage limitation stub

add new function to get the voltage at the end of
dcn_validate_bandwidth, to check against the
highest voltage we allow.

Created a stub to allow for optimizations

Signed-off-by: Joseph Gravenor <joseph.gravenor@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Sun peng Li <Sunpeng.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add null checks before logging

Adding NULL checks to various parameters in log_tf, to avoid
nullptr errors

Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Nikola Cornij <Nikola.Cornij@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: set Hratio and VRatio in dml

Set the writeback Hratio and Vratio in dml.

Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix dp stream enable

A previous odm change broke stream enable by always setting
n_multiply as if odm was on.

This fixes the check for odm by making sure opp count is >1
rather than not 0.

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: load iram for abm 2.3

[Why]
ABM 2.3 firmware expects information in iRAM that differs from previous
versions of ABM, so a mechanism is required to provide it with that
information.

[How]
Extend the existing iRAM definition to include parameters added by
ABM 2.3, and load it if DMCU is running ABM 2.3.

Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix MPO HUBP underflow with Scatter Gather

[why]
With Scatter Gather enabled, HUBP underflows during MPO enabled video
playback. hubp_init has a register write that fixes this problem, but
the register is cleared when HUBP gets power gated.

[how]
Make a call to hubp_init during enable_plane, so that the fix can
be applied after HUBP powers back on again.

Signed-off-by: Zi Yu Liao <ziyu.liao@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix audio endpoint not getting disabled issue

[Why]
Disable_audio_stream gets enum option as a paramenter which will decide
if we free acquired resources or not. However checks for the option is
guarded by the other condition which check if audio stream is getting
diabled more than once. With both conditions combined, if we attempt to
disable audio stream twice in a row, first with keep and second with
free as an option, we will never free any resources, which will make
system think there is audio endpoint connected even after we plug out
the device

[How]
Get rid of option as parameter to disable_audio_stream and move the part
of the code that free acquired resources to outside where to keep or to
free resources is actually determined

Signed-off-by: Su Sung Chung <Su.Chung@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Delete dead code in command_table_helper

[Why]
dig_encoder_sel_to_atom will always return zero on any ASIC version
past DCE80 since programming of the FE selection is handled by
driver, but the translation code was left in the function, making
it look like a coding error.

[How]
Remove code that has no effect, and replace with a comment describing
why it returns zero.

Signed-off-by: Julian Parkin <julian.parkin@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: re structure odm to allow 4 to 1 support

Currently odm is handled using top_bottom pipe by special casing
the differing opps to differentiate from mpc combine.

Since top/bottom pipe list was made to track mpc muxing this creates
difficulties in adding a 4 pipe odm case support.

Rather than continue using mpc combine list, this change reworks odm
to use it's own linked list to keep track of odm combine pipes. This
also opens up options for using mpo with odm, if a practical use case
is ever found.

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: set adev->num_vmhubs for gmc6,7,8

So that we properly handle them on older asics.

Fixes: 3ff985485b29 ("drm/amdgpu: Export function to flush TLB of specific vm hub")
Tested-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/display: add flag for multi-display mclk switching

Add a dcfeaturemask flag for mclk switching.  Disable by default;
enable once the feature has seen more testing.

Set amdgpu.dcfeaturemask=2 on the kernel command line in grub
to enable this.

Acked-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: update bw_calcs to take pipe sync into account (v3)

Properly set all_displays_in_sync so that when the data is
propagated to powerplay, it's set properly and we can enable
mclk switching when all monitors are in sync.

v2: fix logic, clean up
v3: check for blending chains, simplify logic

Acked-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/powerplay/vega10: enable mclk switching if monitors are synced

If DC has synced the displays, we can enable mclk switching to
save power.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/powerplay/smu7: enable mclk switching if monitors are synced

If DC has synced the displays, we can enable mclk switching to
save power.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/powerplay: Fix Vega20 power reading again

For the 40.46 SMU release, they changed CurrSocketPower to
AverageSocketPower, but this was changed back in 40.47 so just check if
it's 40.46 and make the appropriate change

Tested with 40.45, 40.46 and 40.47 successfully

Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amd/amdkfd: add Arcturus vf DID support

Add the virtual function PCI device id.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Frank.Min <Frank.Min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerpaly: fix navi series custom peak level value error

fix other navi asic set peak performance level error.
because the navi10_ppt.c will handle navi12 14 asic,
it will use navi10 peak value to set other asic, it is not correct.

after patch:
only navi10 use custom peak value, other asic will used default value.

Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: correct ras error count type

Use unsigned long type for the same ras count variable.
This will avoid overflow on 64 bit system.

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix calc_pll_max_vco_construct

This was broken by a previous change switching to cached fw_info.
Fixed by inverting a valid bool check.

Bug: https://bugs.freedesktop.org/show_bug.cgi?id=111432
Fixes: 9adc8050bf3c ("drm/amd/display: make firmware info only load once during dc_bios create")
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable VCN DPG for Renoir

This will enable indirect SRAM loading for VCN DPG mode initialization.

Signed-off-by: Thong Thai <thong.thai@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amdgpu: use direct loading on renoir vcn for the moment"

This reverts commit 444a0fea5107e9ad7e3cbbafed78678489e31713.

We are ready to enable it now.

Signed-off-by: Thong Thai <thong.thai@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: update gc/sdma goldensetting for rn

This patch updates gc/sdma goldensetting for renoir

Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: Disable renoir smu feature retrieve for the moment

To avoid the dpm frequence range get failed when DPM enabled and it
will be enabled later once handle well the feature bit map struct.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: enable renoir dpm feature

enable the dpm feature for the renoir.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable SDMA power gating for rn

Enable SDMA PG flag during device ip early init.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/sdma4: set sdma clock gating for rn

Add support for SDMA clockgating on RN.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/mmhub1: set mmhub clock gating for rn

setup mmhub clockgating.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable DF clock gating for rn

Enable DF clock gating during DF IP early init.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable athub clock gating for rn

Enable athub MG and LS clock gating.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable IH clock gating for rn

Enable IH clock gating during IH block initialized.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable vcn clock gating for rn

Enable VCN middle grain clock gating.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable rom clock gating for rn

Enable rom light sleep clock gating.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable HDP clock gating for rn

Enable HDP light sleep clock gating.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable BIF clock gating for rn

Enable BIF light sleep clock gating.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable sdma clock gating for rn

Enable sdma middle grain and light sleep clock gating.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable mmhub clock gating for rn

Enable mmhub midle grain and light sleep clock gating.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable gfx clock gating for rn

Enable gfx cg/mg/cp etc clock gating.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: add DPMCLOCKS table implementation

This patch adds add DPMCLOCKS table implementation
Rename smu_populate_smc_pptable to smu_populate_smc_tables

Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: init smu tables for rn

Initialize smu tables for renoir:
WATERMARKS/DPMCLOCKS/SMU_METRICS

Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: add smu tables for rn

add and map smu tables for renoir

Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: using valid mapping check for rn

Check whether the message mapping is valid

Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: fix checking gfxoff status for rn

For renoir, it should use mmSMUIO_GFX_MISC_CNTL to check
gfxoff status. For the first time to enter gfxoff status,
it maybe takes about one second more. So just set the max
timeout to 5s.

GFXOFF_STATUS(bits 2:1)'s description is below:
0=GFXOFF(default).
1=Transition out of GFX State.
2=Not in GFXOFF.
3=Transition into GFXOFF.

Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add and enable gfxoff feature

This patch updates gfxoff feature.

Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add set_gfx_cgpg implement (v2)

add set_gfx_cgpg implement

v2: check if using sw_smu (Alex)

Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: udpate smu_v12_0_check_fw_version (v2)

This interface support SMU_MSG_GetDriverIfVersion
and SMU_MSG_GetSmuVersion checking.

v2: squash in driver_if changes (Alex)

Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: powerup sdma/vcn for all apu series

All apu series need powerup sdma and vcn via smu messages.

Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/powerplay: add Renoir VCN power management

Thus VCN can be powered up for normal operations

Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: skip dpm init for renoir

Renoir DPM is not functional so far, we skip it for the comment.
Will revert this patch once SMU 12 is functional.

Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/powerplay: add power up/down SDMA interfaces for renoir

1.Implement PowerUpSDMA/PowerDownSDMA interfaces in the swSMU for renoir
2.adjust smu ip block ahead of gfx&sdma ip block

Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/powerplay: add smu ip block for renoir (v2)

add swSMU [smu_v12_0] for renoir

v2: whitespace fixes (Alex)

Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/powerplay: add smu_v12_0.c & smu_v12_0.h for renoir

add smu_v12_0.c & smu_v12_0.h for renoir

Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/powerplay: add initial renoir_ppt.c for renoir (v3)

Add renoir_ppt and map ppsmc to amdgpu_smu.h

v2: squash in ppsmc updates (Alex)
v3: squash in driver_if updates (Alex)

Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: add smu12_driver_if.h (v3)

This patch adds smu12_driver_if.h

v2: squash in updates (Alex)
v3: more updates (Alex)

Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/powerplay: Add smu_v12_0_ppsmc.h (v2)

This is the SMU v12 driver message interface.

v2: squash in updates

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix a potential null pointer dereference

Currently the pointer init_data is dereferenced on the assignment
of fw_info before init_data is sanity checked to see if it is null.
Fix te potential null pointer dereference on init_data by only
performing dereference after it is null checked.

Addresses-Coverity: ("Dereference before null check")
Fixes: 9adc8050bf3c ("drm/amd/display: make firmware info only load once during dc_bios create")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/powerplay: remove redundant assignment to variable baco_state

Variable baco_state is initialized to a value that is never read and it is
re-assigned later. The initialization is redundant and can be removed.

Addresses-Coverity: ("Unused Value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Make deallocate_hiq_sdma_mqd static

Fix sparse warning:

drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_device_queue_manager.c:1846:6:
 warning: symbol 'deallocate_hiq_sdma_mqd' was not declared. Should it be static?

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/sdma5: fix number of sdma5 trap irq types for navi1x

v2: set num_types based on num_instances

navi1x has 2 sdma engines but commit
"e7b58d03b678 drm/amdgpu: reorganize sdma v4 code to support more instances"
changes the max number of sdma irq types (AMDGPU_SDMA_IRQ_LAST) from 2 to 8
which causes amdgpu_irq_gpu_reset_resume_helper() to recover irq of sdma
engines with following logic:

(enable irq for sdma0) * 1 time
(enable irq for sdma1) * 1 time
(disable irq for sdma1) * 6 times

as a result, after gpu reset, interrupt for sdma1 is lost.

Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>