backports: add some new options to defconfigs/wifi

This adds ath10k, wcn36xx and rt3573 to the default wifi config.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: refresh on next-20131018

1   2.6.25              [  OK  ]
2   2.6.26              [  OK  ]
3   2.6.27              [  OK  ]
4   2.6.28              [  OK  ]
5   2.6.29              [  OK  ]
6   2.6.30              [  OK  ]
7   2.6.31              [  OK  ]
8   2.6.32              [  OK  ]
9   2.6.33              [  OK  ]
10  2.6.34              [  OK  ]
11  2.6.35              [  OK  ]
12  2.6.36              [  OK  ]
13  2.6.37              [  OK  ]
14  2.6.38              [  OK  ]
15  2.6.39              [  OK  ]
16  3.0.98              [  OK  ]
17  3.1.10              [  OK  ]
18  3.10.14             [  OK  ]
19  3.11.3              [  OK  ]
20  3.12-rc3            [  OK  ]
21  3.2.51              [  OK  ]
22  3.3.8               [  OK  ]
23  3.4.64              [  OK  ]
24  3.5.7               [  OK  ]
25  3.6.11              [  OK  ]
26  3.7.10              [  OK  ]
27  3.8.13              [  OK  ]
28  3.9.11              [  OK  ]

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: backport new sysfs API for bcma and ssb

bcma and ssb are using the new sysfs API starting with kernel 3.12.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: use sysfs api backport independent from kernel version

In struct class the new sysfs dev_groups member was added with kernel
3.11, but in other structs, like struct bus_type the new member was
added with kernel 3.12. This backport is now needed on different kernel
versions depending on the struct where is was used.
With this patch ATTRIBUTE_GROUPS() will always be used with the new API
and ATTRIBUTE_GROUPS_BACKPORT() will always be used used with the old
API and the patch has to add a KERNEL_VERSION check to add the correct
macro.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: add REGULATOR_LINEAR_RANGE

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: refresh patches on next-20131011

1   2.6.25              [  OK  ]
2   2.6.26              [  OK  ]
3   2.6.27              [  OK  ]
4   2.6.28              [  OK  ]
5   2.6.29              [  OK  ]
6   2.6.30              [  OK  ]
7   2.6.31              [  OK  ]
8   2.6.32              [  OK  ]
9   2.6.33              [  OK  ]
10  2.6.34              [  OK  ]
11  2.6.35              [  OK  ]
12  2.6.36              [  OK  ]
13  2.6.37              [  OK  ]
14  2.6.38              [  OK  ]
15  2.6.39              [  OK  ]
16  3.0.98              [  OK  ]
17  3.1.10              [  OK  ]
18  3.10.14             [  OK  ]
19  3.11.3              [  OK  ]
20  3.12-rc3            [  OK  ]
21  3.2.51              [  OK  ]
22  3.3.8               [  OK  ]
23  3.4.64              [  OK  ]
24  3.5.7               [  OK  ]
25  3.6.11              [  OK  ]
26  3.7.10              [  OK  ]
27  3.8.13              [  OK  ]
28  3.9.11              [  OK  ]

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: remove struct platform_device_id from wcn36xx

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: add resource_size()

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: add VLAN_PRIO_MASK and VLAN_PRIO_SHIFT

It should be safe to add them for older kernel versions, there these
values were hard coded in other places.

This was added in linux-2.6.33.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: refresh patches on next-20131004

Manual fixes where needed in:
patches/collateral-evolutions/network/09-threaded-irq/drivers_net_wireless_ti_wlcore_main.patch
patches/collateral-evolutions/network/40-netdev-hw-features/drivers_net_ethernet_atheros_atl1e_atl1e_main.patch

1   2.6.25              [  OK  ]
2   2.6.26              [  OK  ]
3   2.6.27              [  OK  ]
4   2.6.28              [  OK  ]
5   2.6.29              [  OK  ]
6   2.6.30              [  OK  ]
7   2.6.31              [  OK  ]
8   2.6.32              [  OK  ]
9   2.6.33              [  OK  ]
10  2.6.34              [  OK  ]
11  2.6.35              [  OK  ]
12  2.6.36              [  OK  ]
13  2.6.37              [  OK  ]
14  2.6.38              [  OK  ]
15  2.6.39              [  OK  ]
16  3.0.98              [  OK  ]
17  3.1.10              [  OK  ]
18  3.10.14             [  OK  ]
19  3.11.3              [  OK  ]
20  3.12-rc3            [  OK  ]
21  3.2.51              [  OK  ]
22  3.3.8               [  OK  ]
23  3.4.64              [  OK  ]
24  3.5.7               [  OK  ]
25  3.6.11              [  OK  ]
26  3.7.10              [  OK  ]
27  3.8.13              [  OK  ]
28  3.9.11              [  OK  ]

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: add NETIF_F_RXFCS and NETIF_F_RXALL

When these are set to 0 on kernels where they are not supported it
should result in them not being used at all.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: fix usb-sg for usbnet

This adapts the changes from:
commit 60e453a940ac678565b6641d65f8c18541bb9f28
Author: Ming Lei <ming.lei@canonical.com>
Date:   Mon Sep 23 20:59:35 2013 +0800

    USBNET: fix handling padding packet

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: add dma_set_mask_and_coherent()

dma_set_mask_and_coherent() is used by some Broadcom drivers.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de

backports: refresh on next-20130927

== ckmake-report.log ==

1   2.6.25              [  OK  ]
2   2.6.26              [  OK  ]
3   2.6.27              [  OK  ]
4   2.6.28              [  OK  ]
5   2.6.29              [  OK  ]
6   2.6.30              [  OK  ]
7   2.6.31              [  OK  ]
8   2.6.32              [  OK  ]
9   2.6.33              [  OK  ]
10  2.6.34              [  OK  ]
11  2.6.35              [  OK  ]
12  2.6.36              [  OK  ]
13  2.6.37              [  OK  ]
14  2.6.38              [  OK  ]
15  2.6.39              [  OK  ]
16  3.0.98              [  OK  ]
17  3.1.10              [  OK  ]
18  3.10.14             [  OK  ]
19  3.11.3              [  OK  ]
20  3.12-rc3            [  OK  ]
21  3.2.51              [  OK  ]
22  3.3.8               [  OK  ]
23  3.4.64              [  OK  ]
24  3.5.7               [  OK  ]
25  3.6.11              [  OK  ]
26  3.7.10              [  OK  ]
27  3.8.13              [  OK  ]
28  3.9.11              [  OK  ]

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: add backport prefix to devm_regulator_register()

Use LINUX_BACKPORT() to prevent a collision with some backported
patches in the kernel backports is being compiled against.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: add dev_get_platdata()

This adds dev_get_platdata() function.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: refresh patches on next-20130920

1   2.6.25              [  OK  ]
2   2.6.26              [  OK  ]
3   2.6.27              [  OK  ]
4   2.6.28              [  OK  ]
5   2.6.29              [  OK  ]
6   2.6.30              [  OK  ]
7   2.6.31              [  OK  ]
8   2.6.32              [  OK  ]
9   2.6.33              [  OK  ]
10  2.6.34              [  OK  ]
11  2.6.35              [  OK  ]
12  2.6.36              [  OK  ]
13  2.6.37              [  OK  ]
14  2.6.38              [  OK  ]
15  2.6.39              [  OK  ]
16  3.0.98              [  OK  ]
17  3.1.10              [  OK  ]
18  3.10.14             [  OK  ]
19  3.11.3              [  OK  ]
20  3.12-rc3            [  OK  ]
21  3.2.51              [  OK  ]
22  3.3.8               [  OK  ]
23  3.4.64              [  OK  ]
24  3.5.7               [  OK  ]
25  3.6.11              [  OK  ]
26  3.7.10              [  OK  ]
27  3.8.13              [  OK  ]
28  3.9.11              [  OK  ]

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: fixed regulator driver depends on kernel >= 3.13

The fixed voltage regulator depends now on kernel >= 3.13,
it uses regulator_desc.fixed_uV.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: add devm_regulator_register()

This backports the following commit from mainline:
commit b33e46bcdc4e598d738ed12a5a7906be4e11d786
Author: Mark Brown <broonie@linaro.org>
Date:   Sat Aug 31 11:58:26 2013 +0100

regulator: core: Provide managed regulator registration

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: refresh patches on next-20130913

== ckmake-report.log ==

1   2.6.25              [  OK  ]
2   2.6.26              [  OK  ]
3   2.6.27              [  OK  ]
4   2.6.28              [  OK  ]
5   2.6.29              [  OK  ]
6   2.6.30              [  OK  ]
7   2.6.31              [  OK  ]
8   2.6.32              [  OK  ]
9   2.6.33              [  OK  ]
10  2.6.34              [  OK  ]
11  2.6.35              [  OK  ]
12  2.6.36              [  OK  ]
13  2.6.37              [  OK  ]
14  2.6.38              [  OK  ]
15  2.6.39              [  OK  ]
16  3.0.98              [  OK  ]
17  3.1.10              [  OK  ]
18  3.10.14             [  OK  ]
19  3.11.3              [  OK  ]
20  3.12-rc3            [  OK  ]
21  3.2.51              [  OK  ]
22  3.3.8               [  OK  ]
23  3.4.64              [  OK  ]
24  3.5.7               [  OK  ]
25  3.6.11              [  OK  ]
26  3.7.10              [  OK  ]
27  3.8.13              [  OK  ]
28  3.9.11              [  OK  ]

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: refresh patches on next-20130906

== ckmake-report.log ==

1   2.6.25              [  OK  ]
2   2.6.26              [  OK  ]
3   2.6.27              [  OK  ]
4   2.6.28              [  OK  ]
5   2.6.29              [  OK  ]
6   2.6.30              [  OK  ]
7   2.6.31              [  OK  ]
8   2.6.32              [  OK  ]
9   2.6.33              [  OK  ]
10  2.6.34              [  OK  ]
11  2.6.35              [  OK  ]
12  2.6.36              [  OK  ]
13  2.6.37              [  OK  ]
14  2.6.38              [  OK  ]
15  2.6.39              [  OK  ]
16  3.0.98              [  OK  ]
17  3.1.10              [  OK  ]
18  3.10.14             [  OK  ]
19  3.11.3              [  OK  ]
20  3.12-rc3            [  OK  ]
21  3.2.51              [  OK  ]
22  3.3.8               [  OK  ]
23  3.4.64              [  OK  ]
24  3.5.7               [  OK  ]
25  3.6.11              [  OK  ]
26  3.7.10              [  OK  ]
27  3.8.13              [  OK  ]
28  3.9.11              [  OK  ]

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: tcf_destroy_chain takes a normal pointer on <= 2.6.25

This caused a compile warning and probably runtime errors in
sch_fq_codel_core.c

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: use correct suspend/resume function for rtl8188ee

The newly created function ends with _compat. This causes compile
warnings and probably runtime problems on kernel < 2.6.29.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: struct tty_port was added with kernel 2.6.28

The functions will only build for kernel version < 3.10 and >= 2.6.28,
so the same with the prototype.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: REGULATOR_TPS65217 needs struct members from kernel 3.12

This does not compile on kernel < 3.12.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: remove addr_assign_type from usbnet

addr_assign_type was added with kernel 2.6.36. This is just used to
inform userspace, so removing it is no problem.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: add eth_hw_addr_inherit()

This is needed by drivers/net/wireless/libertas/mesh.c

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: refresh on next-20130830

== ckmake-report.log ==

1   2.6.25              [  OK  ]
2   2.6.26              [  OK  ]
3   2.6.27              [  OK  ]
4   2.6.28              [  OK  ]
5   2.6.29              [  OK  ]
6   2.6.30              [  OK  ]
7   2.6.31              [  OK  ]
8   2.6.32              [  OK  ]
9   2.6.33              [  OK  ]
10  2.6.34              [  OK  ]
11  2.6.35              [  OK  ]
12  2.6.36              [  OK  ]
13  2.6.37              [  OK  ]
14  2.6.38              [  OK  ]
15  2.6.39              [  OK  ]
16  3.0.98              [  OK  ]
17  3.1.10              [  OK  ]
18  3.10.14             [  OK  ]
19  3.11.3              [  OK  ]
20  3.12-rc3            [  FAIL  ]
21  3.2.51              [  OK  ]
22  3.3.8               [  OK  ]
23  3.4.64              [  OK  ]
24  3.5.7               [  OK  ]
25  3.6.11              [  OK  ]
26  3.7.10              [  OK  ]
27  3.8.13              [  OK  ]
28  3.9.11              [  OK  ]

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: do not use uapi in include

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: add platform driver for media drivers

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: VIDEO_RENESAS_VSP1 depends on kernel >= 3.6

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: fix kernel dependencies for regulator drivers

These drivers are depending on changes of the regulator core driver
which are not in the specific kernel versions.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: remove vga_switcheroo.h

This only used by the DRM drivers

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: remove linux/pagemap.h

This was just used by some GPU drivers

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: remove pci_platform_rom()

This was only used by the DRM drivers

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: remove shmem_read_mapping_page_gfp()

This was only needed for some of the DRM drivers, remove it.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: remove cpufreq_quick_get_max()

This was only needed for some of the DRM drivers, remove it.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: remove i2c_bit_algo()

This was only needed for some of the DRM drivers, remove it.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: remove compat_wake_up_locked()

This was only needed for some of the DRM drivers, remove it.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: remove devm_regmap_init_spi()

This is not used by any code in backports, not even a DRM driver.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: remove ktime_get_monotonic_offset()

This was only needed for some of the DRM drivers, remove it.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: remove scatterlist

This was only needed for some of the DRM drivers, remove it.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: remove some stuff related to MTRR

This was only needed for some of the DRM drivers, remove it.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: remove more hdmi stuff

This was only needed for some of the DRM drivers, remove it.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: remove BACKPORT_BUILD_HDMI

This was only needed for some of the DRM drivers, remove it.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: remove BACKPORT_BUILD_RADIX_HELPERS

This was only needed for some of the DRM drivers, remove it.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: remove CPTCFG_BACKPORT_BUILD_WW_MUTEX

This was only needed for some of the DRM drivers, remove it.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: remove BACKPORT_BUILD_CROSS_RESERVATION

This was only needed for some of the DRM drivers, remove it.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: remove platform drivers

The platform drivers were only needed by some DRM drivers and are not
needed any more with the DRM driver being removed.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: remove DRM driver

Maintaining the DRM driver takes a lot of recourses as there they are
depending on many API changes done to the core kernel code and
currently we do not have that many recourses to follow them. On the
other side one needs also new userspace drivers to make use of the new
features added to the DRM kernel drivers and it is not easy to update
the X drivers. Therefore we came to the conclusion to remove the drm
drivers for now.

There were also some problems with some DRM drivers, like the Intel
i915 driver caused kernel panic on some systems and was probably only
usable on some very recent kernel versions.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: update test kernel versions

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: refresh patches on next-20130822

== ckmake-report.log ==

1   2.6.25              [  OK  ]
2   2.6.26              [  OK  ]
3   2.6.27              [  OK  ]
4   2.6.28              [  OK  ]
5   2.6.29              [  OK  ]
6   2.6.30              [  OK  ]
7   2.6.31              [  OK  ]
8   2.6.32              [  OK  ]
9   2.6.33              [  OK  ]
10  2.6.34              [  OK  ]
11  2.6.35              [  OK  ]
12  2.6.36              [  OK  ]
13  2.6.37              [  OK  ]
14  2.6.38              [  OK  ]
15  2.6.39              [  OK  ]
16  3.0.98              [  OK  ]
17  3.1.10              [  OK  ]
18  3.10.14             [  OK  ]
19  3.11.3              [  OK  ]
20  3.12-rc3            [  FAIL  ]
21  3.2.51              [  OK  ]
22  3.3.8               [  OK  ]
23  3.4.64              [  OK  ]
24  3.5.7               [  OK  ]
25  3.6.11              [  OK  ]
26  3.7.10              [  OK  ]
27  3.8.13              [  OK  ]
28  3.9.11              [  OK  ]

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: remove reading of consumed energy from sysfs

MSR_RAPL_POWER_UNIT is not available on older kernel versions.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: add tty_port_tty_hangup()

This is needed by ./net/bluetooth/rfcomm/tty.c

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: add tty_port_tty_wakeup()

This is needed by ./net/bluetooth/rfcomm/tty.c

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: copy include/drm/drm_flip_work.h

This file was newly added to drm.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: backport new sysfs api in media

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: add DEVICE_ATTR_RW

This is used by drivers/media/v4l2-core/v4l2-dev.c.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: refresh patches for next-20130816

1   2.6.25              [  OK  ]
2   2.6.26              [  OK  ]
3   2.6.27              [  OK  ]
4   2.6.28              [  OK  ]
5   2.6.29              [  OK  ]
6   2.6.30              [  OK  ]
7   2.6.31              [  OK  ]
8   2.6.32              [  OK  ]
9   2.6.33              [  OK  ]
10  2.6.34              [  OK  ]
11  2.6.35              [  OK  ]
12  2.6.36              [  OK  ]
13  2.6.37              [  OK  ]
14  2.6.38              [  OK  ]
15  2.6.39              [  OK  ]
16  3.0.89              [  OK  ]
17  3.1.10              [  OK  ]
18  3.10.5              [  OK  ]
19  3.11-rc4            [  OK  ]
20  3.2.50              [  OK  ]
21  3.3.8               [  OK  ]
22  3.4.56              [  OK  ]
23  3.5.7               [  OK  ]
24  3.6.11              [  OK  ]
25  3.7.10              [  OK  ]
26  3.8.13              [  OK  ]
27  3.9.11              [  OK  ]

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: do not build REGULATOR_PALMAS on older kernel versions.

REGULATOR_PALMASi now needs some symbols form headers of very recent
kernel versions.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: add debugfs_create_x64()

This adds debugfs_create_x64() by calling debugfs_create_u64() instead.
The 64 bit number is then not hex, but dec formated in debug fs.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: do not use DMA SG on old kernel versions

the usb net driver now uses the dma sg api which is not available on
old kernels, this patch removed the usage of the dma sg api for old
kernel versions.

This backports the following upstream commit:
commit 638c5115a794981441246fa8fa5d95c1875af5ba
Author: Ming Lei <ming.lei@canonical.com>
Date:   Thu Aug 8 21:48:24 2013 +0800

    USBNET: support DMA SG

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: use old led api on old kernel versions.

Usage of a new led api was introduced in mac80211, this patch make
backports use the old api on older kernel versions. This could cause a
problem with the led, the transmit led could stay on if nothing is
transfered.

This backports the following upstream commit:
commit e47f2509e5f182f4df144406de6f2bc78179d57e
Author: Fabio Baltieri <fabio.baltieri@gmail.com>
Date:   Thu Jul 25 12:00:26 2013 +0200

    mac80211: use oneshot blink API for LED triggers

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: replace new portid usage

In this upstream commit a new usage of portid was introduced:
commit ac22ac466a659f1b2e02a2e2ee23fc5c42da2c95
Author: Samuel Ortiz <sameo@linux.intel.com>
Date:   Wed Jul 24 18:10:50 2013 +0200

    NFC: Add a GET_SE netlink API

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: refresh patches for next-20130809

== ckmake-report.log ==

1   2.6.25              [  OK  ]
2   2.6.26              [  OK  ]
3   2.6.27              [  OK  ]
4   2.6.28              [  OK  ]
5   2.6.29              [  OK  ]
6   2.6.30              [  OK  ]
7   2.6.31              [  OK  ]
8   2.6.32              [  OK  ]
9   2.6.33              [  OK  ]
10  2.6.34              [  OK  ]
11  2.6.35              [  OK  ]
12  2.6.36              [  OK  ]
13  2.6.37              [  OK  ]
14  2.6.38              [  OK  ]
15  2.6.39              [  OK  ]
16  3.0.89              [  OK  ]
17  3.1.10              [  OK  ]
18  3.10.5              [  OK  ]
19  3.11-rc4            [  OK  ]
20  3.2.50              [  OK  ]
21  3.3.8               [  OK  ]
22  3.4.56              [  OK  ]
23  3.5.7               [  OK  ]
24  3.6.11              [  OK  ]
25  3.7.10              [  OK  ]
26  3.8.13              [  OK  ]
27  3.9.11              [  OK  ]

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: REGULATOR_DA9210 needs at least kernel 3.5

This drivers needs some new members in the regulator structure.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: add HDMI_INFOFRAME_SIZE

Add the missing define.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: add hdmi_infoframe_pack()

This adds the missing function hdmi_infoframe_pack() for kernels where
the HDMI subsystem is not backported, like all kernel >= 3.9.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: add include/drm/drm_agpsupport.h

This adds the missing file include/drm/drm_agpsupport.h

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: fix intel i915 drm driver

The intel i915 drm driver uses the declarations from intel-gtt.h to
interact with drivers/char/agp/intel-gtt.c which is not
backported by backports project. To prevent some strange problems when
using i915, use the headers from the kernel and do not use our own. This
causes some compile problems which where runtime problems before and
bumps the minimal kernel version to 3.7.

This i915 still crash on my device with kernel 3.7.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

gentree.py: add ending slash to upload path

the filename in kup put should end with a slash otherwise it tried to
overwrite this file.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

gentree.py: log kup command before executing

Add a logging of the next command to be executed.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

gentree.py: fix directory creating

The full path has to be provided not just the new directory to create.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

gentree.py: do not add full path into tar

dir_to_tar could be the absolute path to the directory to to tar, but
we do not want the full patch in the tar, just the basename.
In addition the second close is not necessary.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

gentree.py: add kernel upload support

This streamlines our release process making it easier for
transitioning releases onto other backport developers.

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

lib/bpkup.py: add or own kernel uploader helper lib

kup is written in perl, add some basic python interfaces
for it to allow us to upload to kernel.org backport
releases.

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

lib/bpgpg.py: add simple gpg helper for gpg signing

Note that kup expects --armor --detach-sign, we'll pass that
as part of our extra_args. The python gpg lib doesn't provide
support for random arguments as this one, so just add our
own little helper and carry it over.

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

lib/bpgit.py: add support for git paranoia

This cleans sanitizes a source tree and ensures
no content is present from what was intended.

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

lib/bpgit.py: add git tree verification support

This verifies that the tree provided has its last commit
both tagged and also digitally signed. In short it does:

  git tag -v $(git describe --dirty)

This will be used later.

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

lib/bpgit.py: add git clean support

We'll use this later.

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

lib/bpgit.py: add git status support

We use --porcelain given that this spits out the results
in an easy-to-parse format for scripts and will remain stable
across git versions and regardless of user configuration.

We will use this later.

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

lib/bpgit.py: enable extra arguments on git describe

This lets us throw at it whatever extra stuff we want.

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: add missing returns on ww_mutex backpots

Two returns were missing on the ww_mutex backport, add these.
The enhancements are not supported on older kernels so just
bail out early.

Tested against next-20130802

1   2.6.25              [  OK  ]
2   2.6.26              [  OK  ]
3   2.6.27              [  OK  ]
4   2.6.28              [  OK  ]
5   2.6.29              [  OK  ]
6   2.6.30              [  OK  ]
7   2.6.31              [  OK  ]
8   2.6.32              [  OK  ]
9   2.6.33              [  OK  ]
10  2.6.34              [  OK  ]
11  2.6.35              [  OK  ]
12  2.6.36              [  OK  ]
13  2.6.37              [  OK  ]
14  2.6.38              [  OK  ]
15  2.6.39              [  OK  ]
16  3.0.79              [  OK  ]
17  3.1.10              [  OK  ]
18  3.10-rc1            [  OK  ]
19  3.2.45              [  OK  ]
20  3.3.8               [  OK  ]
21  3.4.46              [  OK  ]
22  3.5.7               [  OK  ]
23  3.6.11              [  OK  ]
24  3.7.10              [  OK  ]
25  3.8.13              [  OK  ]
26  3.9.3               [  OK  ]

real    34m47.935s
user    938m15.592s
sys     130m11.724s

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: refresh patches for next-20130802 again

For some reason some other changes were picked up again now.

== ckmake-report.log ==

1   2.6.25              [  OK  ]
2   2.6.26              [  OK  ]
3   2.6.27              [  OK  ]
4   2.6.28              [  OK  ]
5   2.6.29              [  OK  ]
6   2.6.30              [  OK  ]
7   2.6.31              [  OK  ]
8   2.6.32              [  OK  ]
9   2.6.33              [  OK  ]
10  2.6.34              [  OK  ]
11  2.6.35              [  OK  ]
12  2.6.36              [  OK  ]
13  2.6.37              [  OK  ]
14  2.6.38              [  OK  ]
15  2.6.39              [  OK  ]
16  3.0.79              [  OK  ]
17  3.1.10              [  OK  ]
18  3.10-rc1            [  OK  ]
19  3.2.45              [  OK  ]
20  3.3.8               [  OK  ]
21  3.4.46              [  OK  ]
22  3.5.7               [  OK  ]
23  3.6.11              [  OK  ]
24  3.7.10              [  OK  ]
25  3.8.13              [  OK  ]
26  3.9.3               [  OK  ]

real    34m47.737s
user    937m23.708s
sys     129m50.928s

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backport: simplify #ifdefs in pci-aspm.h

Just use #else instead of two conditionals.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: add generic semaphore.h

Matthew generalized the semaphore implementation and part of
that collateral evolution consisted of changing the header
used for the expected routines from asm/semaphore.h to
linux/semaphore.h.

mcgrof@garbanzo ~/linux-next (git::master)$ git describe --contains \
64ac24e738823161693bf791f87adc802cf529ff
v2.6.26-rc1~1155^2~5

commit 64ac24e738823161693bf791f87adc802cf529ff
Author: Matthew Wilcox <matthew@wil.cx>
Date:   Fri Mar 7 21:55:58 2008 -0500

    Generic semaphore implementation

    Semaphores are no longer performance-critical, so a generic C
    implementation is better for maintainability, debuggability and
    extensibility.  Thanks to Peter Zijlstra for fixing the lockdep
    warning.  Thanks to Harvey Harrison for pointing out that the
    unlikely() was unnecessary.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: fix compilation for 2.6.25 for math64 header

We need to ifdef correctly before assuming we can include that
header.

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: do not depend on PCI functions when PCI is disabled in the kernel

This should prevent some compile errors when backports is used with a
kernel without PCI support.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: fix typo in define

This fixes a build error one some non x86 systems.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: remove alx patch for < 2.6.24

Since we don't support kernels before 2.6.24 anymore
there's no need to carry this patch.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

remove support for kernel 2.6.24

By requiring 2.6.25 we can get rid of quite a lot of backport work.
2.6.25 was released more than five years ago (April 2011) and wasn't
a long-term kernel either, so there's little point in supporting it
now.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backport: backport device_move() properly

This was causing conflicts again when updating against
wireless-next, so instead of adjusting the patches just
provide a proper static inline backport.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: Actually export the 2.6.34 sdio compat symbols

sdio_get_host_pm_caps() and sdio_set_host_pm_flags() were defined
in compat-2.6.34 but not actually exported for other modules to use.

The cw1200 driver needs sdio_set_host_pm_flags() properly exported.

Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: fix conflict in swiotlb_nr_tbl() on RHEL 6.4

The RedHat kernel also provides a implementation for swiotlb_nr_tbl(),
us that one on these kernels.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: refresh patches on next-20130802

== ckmake-report.log ==

1   2.6.24              [  OK  ]
2   2.6.25              [  OK  ]
3   2.6.26              [  OK  ]
4   2.6.27              [  OK  ]
5   2.6.28              [  OK  ]
6   2.6.29              [  OK  ]
7   2.6.30              [  OK  ]
8   2.6.31              [  OK  ]
9   2.6.32              [  OK  ]
10  2.6.33              [  OK  ]
11  2.6.34              [  OK  ]
12  2.6.35              [  OK  ]
13  2.6.36              [  OK  ]
14  2.6.37              [  OK  ]
15  2.6.38              [  OK  ]
16  2.6.39              [  OK  ]
17  3.0.89              [  OK  ]
18  3.1.10              [  OK  ]
19  3.10.5              [  OK  ]
20  3.11-rc4            [  OK  ]
21  3.2.50              [  OK  ]
22  3.3.8               [  OK  ]
23  3.4.56              [  OK  ]
24  3.5.7               [  OK  ]
25  3.6.11              [  OK  ]
26  3.7.10              [  OK  ]
27  3.8.13              [  OK  ]
28  3.9.11              [  OK  ]

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: Atheros atl1c needs build_skb(), do not build on < 3.5

The Atheros atl1c driver now uses build_skb() which was added in 3.5.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: USB_SPEED_SUPER was added in 2.6.31

Now usbnet.c uses it and fails on kernel 2.6.30 without this patch.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: use genl_info_snd_portid() at an other place.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: add sysfs api backport for ieee802154

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: REGULATOR_DA903X does not build on kernel < 3.12

REGULATOR_DA903X now uses a new struct member added with kernel 3.12

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>