ib_pack.h: Add opcode definition for send with invalidate

The opcode for "SEND Last with Invalidate" and "SEND Only with
Invalidate" have been defined for RC in IBA Specification Vol 1
since Release 1.2. Add the definition to the header file in
preparation of supporting these opcodes in rdmavt based drivers.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Keep SC_USER as the last send context type

SC_USER needs to be the last send context type to ensure other
send context types get their allocation when num_user_contexts
is set to a large number.

This fixes a panic when the module parameter num_user_contexts
is set to 141 and larger.

Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Immediately apply congestion setting MAD

The handling of the congestion setting MAD packet only
saved off the values, waiting for a congestion control
table packet before going active.  Instead, immediately
apply the values.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Correct log message strings

Remove "IB" keyword from log messages.
Correct comment for thermal sensor init function.

Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jakub Pawlak <jakub.pawlak@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/rdmavt: Increase CQ callback thread priority

The priority of the send engines is higher than the CQ completion
thread potentially causing completions to be starved for very
fast interfaces.

Change the CQ kthread to match the send engine threads to minimize
this delay for ULP completion processing.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Fix hfi_rcvhdr tracepoint

The hfi_rcvhdr tracepoint has the ctxt and eflags switched in the
prototype of the trace event, compared to the args and usage of the
trace function. Fix this by swapping these 2 fields in the trace event
prototype.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Remove unnecessary header

While running perftests, there is a significant utilization of the
random number daemon. This is due to the linux/random.h header being
included in qp.c and verbs.c. However, none of the functions from this
header are being used in these files, so remove the unnecessary header.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Improve performance of interval RB trees

The interval RB tree management functions use handlers to
store user-specific callback for the various tree operations.
These handlers are put on a doubly-linked list. When a RB
tree function is called, the list is searched for the handler
of the particular tree.

The list which holds the handlers is modified very rarely - when
a handler is created and when a handler is removed. On the other
hand, it is searched very often. This a perfect usage scenario
for RCU.

The result is a much lower overhead of traversing the list as most
of the time no locking will be required.

Reviewed-by: Dean Luick <dean.luick@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Fix potential panic with sdma drained mechanism

The guard is backwards, potentially causing the SDMA client
to panic if a wait structure was not specified.

psm and verbs are not exposed to the issue, but fix the
code just to be correct.

Fixes: a545f5308b6c ("staging/rdma/hfi: fix CQ completion order issue")
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Fix pio wait counter double increment

The code unconditionlly increments the pio wait counter
making the counter inacurate and unusable.

Fixes: 14553ca11039 ("staging/rdma/hfi1: Adaptive PIO for short messages")
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Remove no-op QSFP reset code

The RESET_N bit of the ASIC_QSFPn_OE register is not used by
the hardware.  Remove code that tries to use it - it does
nothing.

Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Correct external device configuration shift

The external device configuration was incorrectly shifted to byte 3 of
the 32 bit DC_HOST_COMM_SETTINGS instead of byte 0. This patch corrects
the shift and provides the cable capability information in byte 0.

Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Wait for QSFP modules to initialize

The function level reset in init_chip() and subsequent write of all 1s
to the ASIC_QSFP registers effectively resets attached active and
optical QSFP modules that pay attention to the RESET_N pin.

We subsequently try to access the QSFP management interface to qualify
and tune the channel and fabric SerDes before enough time (2 seconds
per SFF 8679 spec for QSFP28 modules) has elapsed for the module to
finish initialization. This fails and causes the failure of the channel
tuning algorithm, preventing us from bringing the link up.

This patch checks the port type prior to beginning channel and SerDes
tuning, and if found to be QSFP, watches for the QSFP initialization
complete interrupt, with a maximum timeout of 2 seconds, to allow the
initialization to complete.

Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Ignore non-temperature warnings on a downed link

QSFP modules can raise an interrupt to inform us of expected conditions
while the link is down, such as RX power low. Actively ignore these
conditions when the link is down as they only add reporting noise.
Continue reporting conditions that are valid at all times, such as
temperature alarms and warnings.

Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Merge branches 'mlx5-1' and 'srp-1' into k.o/for-4.7

net/mlx5: Update mlx5_ifc hardware features

Adding the needed mlx5_ifc hardware bits and structs
for the following features:

* Add vport to steering commands for SRIOV ACL support
* Add mlcr, pcmr and mcia registers for dump module EEPROM
* Add support for FCS, beacon led and disable_link bits to
  hca caps
* Add CQE period mode bit in CQ context for CQE based CQ
  moderation support
* Add umr SQ bit for fragmented memory registration
* Add needed bits and caps for Striding RQ support

In-order to avoid possible future conflicts between rdma and
net-next we added all expected updates to this file for this release.
If more changes will be submitted, we plan to do it only through
one of the subsystems, probably net-next.

All updated bits in this patch will be later used in
the up-coming submissions to net-next and rdma trees.

Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Acked-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

net/mlx5: Fix mlx5 ifc cmd_hca_cap bad offsets

All reserved fields after early_vf_enable are off by 1, since
early_vf_enable was not explicitly declared as array of size 1.

Reserved field before cqe_zip had a wrong size, it should
be 0x80 + 0x3f.

Fixes: b0844444590e ("net/mlx5_core: Introduce access function to read internal timer ")
Fixes: b4ff3a36d3e4 ("net/mlx5: Use offset based reserved field names in the IFC header file")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Acked-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/srp: Move common code into the caller

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Sagi Grimberg <sai@grimberg.m>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/srp: Move code out of a loop

Since all srp_map_finish_fr() callers pass a non-zero value as
the fourth argument (sg_nents), the sg_nents == 0 check in that
function can be removed. Add a count == 0 check in the caller
of that function.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/srp: Avoid that mapping failure triggers an infinite loop

The srp_queuecommand() function translates ENOMEM into QUEUE_FULL
which causes the SCSI mid-layer to retry the command. All other
error codes are translated into DID_ERROR which causes the SCSI
command to fail. Return E2BIG if mapping will always fail to
prevent that the SCSI mid-layer keeps resubmitting a command
forever.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/srp: Introduce target->mr_pool_size

This patch does not change any functionality.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/srp: Fix srp_map_data() error paths

Ensure that req->nmdesc is set correctly in srp_map_sg() if mapping
fails. Avoid that mapping failure causes a memory descriptor leak.
Report srp_map_sg() failure to the caller.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/srp: Document srp_map_data() return value

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/srp: Fix a comment

The free request list was removed through patch "IB/srp: Use block layer tags".
Hence update a comment that refers to that free request list.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/srp: Fix a spelling error in a source code comment

Change one occurrence of "boundries" into "boundaries".

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Merge branches 'hfi1' and 'iw_cxgb4' into k.o/for-4.7

RDMA/iw_cxgb4: remove abort_connection() usage from ep_timeout()

Use c4iw_ep_disconnect() instead.  This is part of getting rid of
abort_connection() altogether so we properly clean up on send_abort()
failures.

This is the last user of abort_connection(), so remove it too.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/iw_cxgb4: move QP -> ERROR on fatal disconnect errors

In c4iw_ep_disconnect(), if we fail to initiate a close operation, then
move the qp to ERROR to disassociate the ep from the qp.  Failure to do
this will leak the ep resources.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/iw_cxgb4: don't use abort_connection in process_mpa_request()

Instead return whether the caller needs to disconnect. This is part of
getting rid of abort_connection() altogether so we properly clean up on
send_abort() failures.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/iw_cxgb4: remove abort_connection() usage from accept/reject

Use c4iw_ep_disconnect() instead. This is part of getting rid of
abort_connection() altogether so we properly clean up on send_abort()
failures.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/iw_cxgb4: free resources when send_flowc() fails

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/iw_cxgb4: remove connection abort from process_mpa_reply

Instead, have the caller, rx_data() handle the close/abort like
it does for process_mpa_request(). This is part of getting rid of
abort_connection() altogether so we properly clean up on send_abort()
failures.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/iw_cxgb4: ensure eps don't get freed while the mutex is held

In rx_data(), with the ep in FPDU_MODE, refcnt=2, if we get unexpected
streaming data, we call c4iw_modify_rc_qp() and move the qp from
RTS -> TERMINATE.  In c4iw_modify_rc_qp(), if rdma_fini() returns
an error, the ep will be dereferenced (refcnt=1).  Then rx_data()
calls c4iw_ep_disconnect() which starts the close operation.
But if send_halfclose() fails in c4iw_ep_disconnect(), we  will call
release_ep_resources() derefing the ep which reduces the refcnt to 0 and
and frees the ep. However we still has the ep mutex at that point, so we
have a touch-after-free bug.  There is a similar issue where
peer_close() calls c4iw_ep_disconnect().

The solution is to add a reference to the ep in c4iw_ep_disconnect()
after acquiring  the mutex, and release it after releasing the mutex.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/iw_cxgb4: stop ep timer on close failure

In c4iw_ep_disconnect(), if we start the ep timer to begin a close,
but send_halfclose() fails, we need to stop the timer and send a CLOSE
event up to the IWCM before releasing the resources. Otherwise, we can
crash when the ep timer fires if the ep is referencing a previous instance
of the device. This can happen as part of adapter reset/recovery, for
instance.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/iw_cxgb4: release ep resources on accept arp failure

If ARP fails before the CPL_PASS_ACCEPT_RPL is seen by hardware, the tid
will be stuck in SYN_PEND and never released.  So create an arp failure
handler specifically for this message to release the endpoint resources.

In pass_accept_rpl_arp_failure(), put the parent endpoint so it will
be freed when destroyed.  Also we don't need to call release_tid() here
because _c4iw_free_ep() calls cxgb4_remove_tid() which releases the
hwtid.

If we get an ABORT_REQ_RSS instead of a PASS_ESTABLISH (because the
peer's ACK to our SYN is never received), then put the parent as well
in peer_abort().

Treat accept_cr() failures just like arp failures: put the parent ep
and release the ep resources destroying the tid

The ARP failure handlers are called in an atomic context, so we need to
schedule some of the processing which might block.  Namely _c4iw_free_ep()
which needs a mutex.  So create a "special" CPL opcode and handler and
schedule it via sched() to be run by process_work() in a blockable context.

Also rework the active open arp failure handler to make use of
release_ep_resources().  This allows both the active and passive arp
failure handlers to use the same deferred cleanup function.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/iser: Fix max_sectors calculation

iSER currently has a couple places that set max_sectors in either the host
template or SCSI host, and all of them get it wrong.

This patch instead uses a single assignment that (hopefully) gets it right:
the max_sectors value must be derived from the number of segments in the
FR or FMR structure, but actually be one lower than the page size multiplied
by the number of sectors, as it has to handle the case of non-aligned I/O.

Without this I get trivial to reproduce hangs when running xfstests
(on XFS) over iSER to Linux targets.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/nes: don't leak skb if carrier down

Alternatively one could free the skb, OTOH I don't think this test is
useful so just remove it.

Cc: <linux-rdma@vger.kernel.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/i40iw: Fix for removing quad hash entries

Fix for removing a quad hash entry when the
corresponding quad hash entry hasn't been added,
which is the case in loopback connections

Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/i40iw: Fix for checking if the QP is destroyed

Fix for checking if the QP associated with a completion
has been destroyed while processing CQ elements.
If that is the case, move the CQ head to the next element
and continue completion processing.

Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/i40iw: Fix for using one sge for RDMA READ

A check is added to validate the requested sge number.
iWARP doesn't support multiple sg elements for
RDMA READ work requests.

Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/i40iw: Fix for the size of kernel mode SQ

Fix to calculate the SQ size based on the max
frag_count, requested by the application instead
of overwriting it with the max supported frag_count

Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/i40iw: Fix for a NOP WQE size

Fix for filling in the WQE size for NOP

Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/i40iw: Correct STag mask to min of 14 bits

STag index mask is calculated incorrectly, missing
the 14 bits minimum requirement. Add max macro to use
either # of MRs or 14 bits in the mask size calculation.

Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/i40iw: Fixes for WQE alignment

Invalidation after every WQE write is changed to invalidate
only if required. NOPs are padded so that WQE writes are
aligned to 64B boundary.

Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/i40iw: Adding queue drain functions

Adding sq and rq drain functions, which block until all
previously posted wr-s in the specified queue have completed.
A completion object is signaled to unblock the thread,
when the last cqe for the corresponding queue is processed.

Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/i40iw: Fix SD calculation for initial HMC creation

Correct SD calculation by using base address returned from commit FPM.
This alleviates any assumptions on resource ordering and alignment
requirement. Also consolidate SD estimation code into i40iw_est_sd().

Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/i40iw: Fix endian issues and warnings

Fix endian warnings and errors due to u32 stored to u16.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/i40iw: Add base memory management extensions

Implement fast register mr, Local invalidate, send with
invalidate and RDMA read with invalidate.

Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/i40iw: Initialize max enabled vfs variable

Initialize max enabled vfs to max rdma vfs instead of 0.

Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/i40iw: Correct return code check in add_pble_pool

Move return code check to immediately after i40iw_hmc_sd_one call
where it is set instead of outside the then statement.

Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/i40iw: Add virtual channel message queue

Queue users of virtual channel on a waitqueue until the channel is
clear instead of failing the call when the channel is occupied.

Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/i40iw: Remove unused code and fix warning

Remove unused code and fix warning.

Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/i40iw: Populate vendor_id and vendor_part_id fields

Populate PCI info fields from PCI device structure.

Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/i40iw: Set vendor_err only if there is an actual error

Add a check for cq_poll_info.error before setting vendor_err
instead of always setting it.

Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/i40iw: Add qp table lock around AE processing

QP may be freed during Async Event processing.
Add a lock around QP table to prevent it.

Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/i40iw: Do not set self-referencing pointer to NULL after free

iwqp->allocated_buffer is a self-referencing pointer to iwqp.
Do not set iwqp->allocated_buffer to NULL after freeing it.

Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/i40iw: Correct max message size in query port

Fix to correct max reported message size in query port.

Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/i40iw: Fix refused connections

Make sure cm_node is setup before sending SYN packet and
ORD/IRD negotiation.

Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/i40iw: Correct QP size calculation

Include inline data size as part of SQ size calculation.
RQ size calculation uses only number of SGEs and does not
support 96 byte WQE size.

Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/i40iw: Fix overflow of region length

Change region_length to u64 as a region can be > 4GB.

Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Serialize hrtimer function calls

hrtimer functions do not guarantee serialization, so we extend the
cca_timer_lock to cover the hrtimer_forward_now() in the hrtimer
callback handler and the hrtimer_start() in process_becn(). This
prevents races between these 2 functions to update the hrtimer state
leading to problems such as:
kernel BUG at kernel/hrtimer.c:1282!
encountered during validation of the CCA feature.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Fix MAD port poll for active cables

A MAD directive to start polling must go through the normal
link tuning and start steps in order to correctly handle
active cables.

Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Correctly report neighbor link down reason

The code to save the link down reason for reporting to the SMA
was in a location before the actual reason was read.  Move the
SMA link down reason assignment to a better location.

Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Use the neighbor link down reason only when valid

The 8051 uses a link down reason to inform the driver why the
link went down.  The neighbor planned link down reason code is
only valid when a link down idle message is received by the 8051.
Enhance the explanation on why the link went down.

Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Ignore link downgrade with 0 lanes

Versions of the 8051 firmware < 0.38 may report a link failure
as a link downgrade with a width of 0 followed by a link down
notification.  Ignore the zero width downgrade notification -
the driver should follow the link down path.

Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Add RSM rule for user FECN handling

Add a receive side mapping rule to extract expected user packets with
the FECN bit set and place them in an eager buffer.  This will allow
user libraries to recognize that a FECN was sent when using header
suppression and respond appropriately.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Create a routine to set a receive side mapping rule

Move the rule setting code into its own routine for improved
searchability and reuse.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Move QOS decision logic into its own function

The decision to use QOS affects other resource allocation.
Move the QOS decision logic into its own function so it can
be called by other interested parties.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Extract RSM map table init from QOS

Refactor the allocation, tracking, and writing of the RSM map table
into its own set of routines.  This will allow the map table to be
passed to multiple users to fill in as needed.  Start with the original
user, QOS.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Reduce kernel context pio buffer allocation

The pio buffers were pooled evenly among all kernel contexts and
user contexts. However, the demand from kernel contexts is much
lower than user contexts. This patch reduces the allocation for
kernel contexts and thus makes more credits available for PSM,
helping performance. This is especially useful on high core-count
systems where large numbers of contexts are used.

A new context type SC_VL15 is added to distinguish the context used
for VL15 from other kernel contexts. The reason is that VL15 needs
to support 2KB sized packet while other kernel contexts need only
support packets up to the size determined by "piothreshold", which
has a default value of 256.

The new allocation method allows triple buffering of largest pio
packets configured for these contexts. This is sufficient to maintain
verbs performance. The largest pio packet size is 2048B for VL15
and "piothreshold" for other kernel contexts. A cap is applied to
"piothreshold" to avoid excessive buffer allocation.

The special case that SDMA is disable is handled differently. In
that case, the original pooling allocation is used to better
support the much higher pio traffic.

Notice that if adaptive pio is disabled (piothreshold==0), the pio
buffer size doesn't matter for non-VL15 kernel send contexts when
SDMA is enabled because pio is not used at all on these contexts
and thus the new allocation is still valid. If SDMA is disabled then
pooling allocation is used as mentioned in previous paragraph.

Adjustment is also made to the calculation of the credit return
threshold for the kernel contexts. Instead of purely based on
the MTU size, a percentage based threshold is also considered and
the smaller one of the two is chosen. This is necessary to ensure
that with the reduced buffer allocation credits are returned in
time to avoid unnecessary stall in the send path.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dean Luick <dean.luick@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Mark Debbage <mark.debbage@intel.com>
Reviewed-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Change default number of user contexts

Change the default number of user contexts to the number of real
(non-HT) cpu cores in order to reduce the division of hfi1 hardware
contexts in the case of high core counts with hyper-threading enabled.

Reviewed-by: Dean Luick <dean.luick@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Use global defines for upper bits in opcode

The awkward coding for setting the allowed_ops field
was tripping an smatch warning.

This patch uses the more appropriate defines from include/rdma
to avoid the issue.

As part of the patch remove a mask that was duplicated
in rdmavt include files and use that mask as appropriate.

Fixes: 8bea6b1cfe6f ("IB/rdmavt: Add create queue pair functionality")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Remove unreachable code

Remove unreachable code from RC ack handling to fix an
smatch error.

Fixes: 633d27399514 ("staging/rdma/hfi1: use mod_timer when appropriate")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Fix double QSFP resource acquire on cache refresh

The function refresh_qsfp_cache() acquires the i2c chain resource,
but one caller already holds the resource.  Change the acquire so
all calls to refresh_qsfp_cache() are covered by the acquire and
remove the acquire within refresh_qsfp_cache().

Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Guard against concurrent I2C access across all chains

The discrete ASIC board design makes the two I2C chains not
independent of each other.  That is, only one chain can safely
be accessed at a time.  For discrete ASIC devices, adjust the
resource locking so that access to one I2C chain will lock both
of the chains.

Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Remove module presence check outside pre-LNI checks

The pre-LNI SerDes and channel tuning algorithm already checks for
module presence assertion for the relevant port types. The extraneous
check removed in this patch blocks link up for port types for which
the module presence assertion is not relevant.

Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Always turn on CDRs for low power QSFP modules

Clock and data recovery mechanisms (CDRs) in active QSFP modules
can be turned on or off to improve the bit error rate observed on
the channel. Signal integrity and bit error rate requirements require
us to always turn on any CDRs present in low power cables (power
dissipation 2.5W or lower). However, we adhere to the platform
designer's settings (provided in the platform configuration) for
higher power cables (dissipation 3.5W or higher) if the platform
designer has determined that the platform requires the CDRs to be
turned on (or off) and is capable of supplying and cooling the higher
power modules.

This patch also introduces the get_qsfp_power_class function to
centralize the bit twiddling required to determine the QSFP power class
across the code. Reusing this function improves the readability of code
that depends on knowing the power class of the cable, such as the
active and optical channel tuning algorithm.

Reviewed-by: Dean Luick <dean.luick@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Check P_KEY for all sent packets from user mode

Add the P_KEY check for user-context mechanism for
both PIO and SDMA. For PIO, the
SendCtxtCheckEnable.DisallowKDETHPackets is set by
default. When the P_KEY is set,
SendCtxtCheckEnable.DisallowKDETHPackets is cleared.
For SDMA, a software check was included. This change
requires user processes to set the P_KEY before sending
any packets, otherwise, the sent packet will fail. The
original submission didn't have this check but it's
required.

Reviewed-by: Dean Luick <dean.luick@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Mikto Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Adjust default MTU to be 10KB

Increasing the default MTU size to 10KB improves performance
for PSM. Change the default MTU to 10KB but constrain
Verbs MTU to 8KB. Also update default MTU module parameter
description to be HFI1_DEFAULT_MAX_MTU.

Reviewed-by: Dean Luick <dean.luick@intel.com>
Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Simplify init_qpmap_table()

Make init_qpmap_table() easier to understand by simplifying
the loop indexing and writing each register when it is "full",
removing the need for a follow-on register write.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Correctly obtain the full service class

The function hdr2sc was using an unshifted mask to obtain
the 5th bit of the service class.  Correct the issue by using
the shifted mask.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Fix QOS rule mappings

The QOS RSM rule mappings are off by one, referencing a kernel receive
context that does not exist.

Correctly start the QOS RSM map entries at FIRST_KERNEL_CONTEXT rather
than MIN_KERNEL_KCTXTS.  Remove the cruft that hid this.

Change the QP map table so all traffic not caught by QOS RSM goes to
the control context rather than the first QOS context.

Correct comments to match the actual code operation and intent.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Remove invalid QOS check

Remove an invalid compare of the number of QOS RSM map table entries
against the number of physical receive contexts.  The RSM map table
has its own size and has no relation to the number of physical receive
contexts.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Fix QOS num_vl bit width

The bit width for num_vls, n, needs to be calculated based on
the pow2 rounded up of the number of vls.  Otherwise num_vls of 3,
5, 6, and 7 will have misplaced QOS RSM map entries.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Fix i2c resource reservation checks

The i2c and qsfp read/write routines should check for the resource
reservation of the incoming argument target rather than the implicit
target of the hardware HFI.

Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Fix sysfs file offset usage

Two sysfs files do not pay attention to the file offset when
reading data. Fix that.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/rdmavt,hfi1,qib: Fix memory leak

rdi->ports has memory allocated in rvt_alloc_device(), but does not get
freed because the hfi1 and qib drivers drivers call ib_dealloc_device()
directly instead of going through rdmavt. Add a rvt_dealloc_device()
that frees rdi->ports and then calls ib_dealloc_device(). Switch hfi1
and qib drivers to calling rvt_dealloc_device() instead of
ib_dealloc_device() directly.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Fix buffer cache races which may cause corruption

There are two possible causes for node/memory corruption both
of which are related to the cache eviction algorithm. One way
to cause corruption is due to the asynchronous nature of the
MMU invalidation and the locking used when invalidating node.

The MMU invalidation routine would temporarily release the
RB tree lock to avoid a deadlock. However, this would allow
the eviction function to take the lock resulting in the removal
of cache nodes.

If the node being removed by the eviction code is the same as
the node being invalidated, the result is use after free.

The same is true in the other direction due to the temporary
release of the eviction list lock in the eviction loop.

Another corner case exists when dealing with the SDMA buffer
cache that could cause memory corruption of kernel memory.
The most common way, in which this corruption exhibits itself
is a linked list node corruption. In that case, the kernel will
complain that a node with poisoned pointers is being removed.
The fact that the pointers are already poisoned means that the
node has already been removed from the list.

To root cause of this corruption was a mishandling of the
eviction list maintained by the driver. In order for this
to happen four conditions need to be satisfied:

   1. A node describing a user buffer already exists in the
      interval RB tree,
   2. The beginning of the current user buffer matches that
      node but is bigger. This will cause the node to be
      extended.
   3. The amount of cached buffers is close or at the limit
      of the buffer cache size.
   4. The node has dropped close to the end of the eviction
      list. This will cause the node to be considered for
      eviction.

If all of the above conditions have been satisfied, it is
possible for the eviction algorithm to evict the current node,
which will free the node without the driver knowing.

To solve both issues described above:
   - the locking around the MMU invalidation loop and cache
     eviction loop has been improved so locks are not released in
     the loop body,
   - a new RB function is introduced which will "atomically" find
     and remove the matching node from the RB tree, preventing the
     MMU invalidation loop from touching it, and
   - the node being extended by the pin_vector_pages() function is
     removed from the eviction list prior to calling the eviction
     function.

Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Extract and reinsert MMU RB node on lookup

The page pinning function, which also maintains the pin cache,
behaves one of two ways when an exact buffer match is not found:
  1. If no node is not found (a buffer with the same starting address
     is not found in the cache), a new node is created, the buffer
     pages are pinned, and the node is inserted into the RB tree, or
  2. If a node is found but the buffer in that node is a subset of
     the new user buffer, the node is extended with the new buffer
     pages.

Both modes of operation require (re-)insertion into the interval RB
tree.

When the node being inserted is a new node, the operations are pretty
simple. However, when the node is already existing and is being
extended, special care must be taken.

First, we want to guard against an asynchronous attempt to
delete the node by the MMU invalidation notifier. The simplest way to
do this is to remove the node from the RB tree, preventing the search
algorithm from finding it.

Second, the node needs to be re-inserted so it lands in the proper place
in the tree and the tree is correctly re-balanced. This also requires
the node to be removed from the RB tree.

This commit adds the hfi1_mmu_rb_extract() function, which will search
for a node in the interval RB tree matching an address and length and
remove it from the RB tree if found. This allows for both of the above
special cases be handled in a single step.

Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Correctly compute node interval

The computation of the interval of an interval RB node
was incorrect leading to data corruption due to the RB
search algorithm not properly finding the all RB nodes
in an MMU invalidation interval.

The problem stemmed from the fact that the beginning
address of the node's range was being aligned to a page
boundary. For certain buffer sizes, this would lead to
a end address calculation that was off by 1 page.

An important aspect of keeping the RB same is also
updating the node's range in the case it's being extended.

Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Protect the interval RB tree when cleaning up

The current implementation of the clean up function for
the interval RB trees has two flaws which may cause
problems in cases of concurrent executing of the function
and MMU notifier.

The flaws were due to the fact that deregistration of the
MMU callbacks was done after the tree was emptied and,
furthermore, the tree was not being locked.

This commit fixes both of these flaws by, first, switch the
order of operations, and, second, locking the tree while
traversing it to prevent any other operations.

Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Fix memory leak in user ExpRcv and SDMA

The driver had two memory leaks - one in the user
expected receive code and one in SDMA buffer cache.

The leak in the expected receive code only showed up
when the user/admin had set ulimit sufficiently low
and the driver did not have enough room in the cache
before hitting the limit of allowed cachable memory.

When this condition occurred, the driver returned
early signaling userland that it needed to free some
buffers to free up room in the cache.

The bug was that the driver was not cleaning up
allocated memory prior to returning early.

The leak in the SDMA buffer cache could occur (even
though it never did), when the insertion of a buffer
node in the interval RB tree failed. In this case, the
driver failed to unpin the pages of the node instead
erroneously returning success.

Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Don't remove list entries if they are not in a list

The SDMA cache logic maintains an eviction list which is ordered
by most recently used user buffers. Upon errors or buffer freeing,
the list nodes were unconditionally being deleted. This would lead
to list corruption warnings if the nodes were never inserted in the
eviction list to begin with.

This commit prevents this by checking that the nodes are already
part of the eviction list.

Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/qib, IB/hfi1: Fix up UD loopback use of irq flags

The dual lock patch moved locking around and missed an issue
with handling irq flags when processing UD loopback
packets.  This issue was revealed by smatch.

Fix for both qib and hfi1 to pass the saved flags to the UD request
builder and handle the changes correctly.

Fixes: 46a80d62e6e0 ("IB/qib, staging/rdma/hfi1: add s_hlock for use in post send")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/rdmavt: Fix adaptive pio hang

The RVT_S_WAIT_PIO_DRAIN flag was missing from
the set of flags indicating a qp is waiting
on a resource.

This caused the sleep/wakeup for adaptive pio
drain to lose a wakeup "hanging" a QP.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Merge branch 'k.o/for-4.6-rc' into testing/4.6

Merge branch 'master' of git://git./linux/kernel/git/torvalds/linux into testing/4.6

IB/security: Restrict use of the write() interface

The drivers/infiniband stack uses write() as a replacement for
bi-directional ioctl().  This is not safe. There are ways to
trigger write calls that result in the return structure that
is normally written to user space being shunted off to user
specified kernel memory instead.

For the immediate repair, detect and deny suspicious accesses to
the write API.

For long term, update the user space libraries and the kernel API
to something that doesn't present the same security vulnerabilities
(likely a structured ioctl() interface).

The impacted uAPI interfaces are generally only available if
hardware from drivers/infiniband is installed in the system.

Reported-by: Jann Horn <jann@thejh.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
[ Expanded check to all known write() entry points ]
Cc: stable@vger.kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Use kernel default llseek for ui device

The ui device llseek had a mistake with SEEK_END and did
not fully follow seek semantics.  Correct all this by
using a kernel supplied function for fixed size devices.

Cc: Al Viro <viro@ZenIV.linux.org.uk>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Don't attempt to free resources if initialization failed

Attempting to free resources which have not been allocated and
initialized properly led to the following kernel backtrace:

    BUG: unable to handle kernel NULL pointer dereference at           (null)
    IP: [<ffffffffa09658fe>] unlock_exp_tids.isra.8+0x2e/0x120 [hfi1]
    PGD 852a43067 PUD 85d4a6067 PMD 0
    Oops: 0000 [#1] SMP
    CPU: 0 PID: 2831 Comm: osu_bw Tainted: G          IO 3.12.18-wfr+ #1
    task: ffff88085b15b540 ti: ffff8808588fe000 task.ti: ffff8808588fe000
    RIP: 0010:[<ffffffffa09658fe>]  [<ffffffffa09658fe>] unlock_exp_tids.isra.8+0x2e/0x120 [hfi1]
    RSP: 0018:ffff8808588ffde0  EFLAGS: 00010282
    RAX: 0000000000000000 RBX: ffff880858a31800 RCX: 0000000000000000
    RDX: ffff88085d971bc0 RSI: ffff880858a318f8 RDI: ffff880858a318c0
    RBP: ffff8808588ffe20 R08: 0000000000000000 R09: 0000000000000000
    R10: ffff88087ffd6f40 R11: 0000000001100348 R12: ffff880852900000
    R13: ffff880858a318c0 R14: 0000000000000000 R15: ffff88085d971be8
    FS:  00007f4674e83740(0000) GS:ffff88087f400000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: 0000000000000000 CR3: 000000085c377000 CR4: 00000000001407f0
    Stack:
     ffffffffa0941a71 ffff880858a318f8 ffff88085d971bc0 ffff880858a31800
     ffff880852900000 ffff880858a31800 00000000003ffff7 ffff88085d971bc0
     ffff8808588ffe60 ffffffffa09663fc ffff8808588ffe60 ffff880858a31800
    Call Trace:
     [<ffffffffa0941a71>] ? find_mmu_handler+0x51/0x70 [hfi1]
     [<ffffffffa09663fc>] hfi1_user_exp_rcv_free+0x6c/0x120 [hfi1]
     [<ffffffffa0932809>] hfi1_file_close+0x1a9/0x340 [hfi1]
     [<ffffffff8116c189>] __fput+0xe9/0x270
     [<ffffffff8116c35e>] ____fput+0xe/0x10
     [<ffffffff81065707>] task_work_run+0xa7/0xe0
     [<ffffffff81002969>] do_notify_resume+0x59/0x80
     [<ffffffff814ffc1a>] int_signal+0x12/0x17

This commit re-arranges the context initialization code in a way that
would allow for context event flags to be used to determine whether
the context has been successfully initialized.

In turn, this can be used to skip the resource de-allocation if they
were never allocated in the first place.

Fixes: 3abb33ac6521 ("staging/hfi1: Add TID cache receive init and free funcs")
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com.
Signed-off-by: Doug Ledford <dledford@redhat.com>