Merge branch 'master' of /linux/kernel/git/jkirsher/net-next-2.6

ipv4: Fix scope value used in route src-address caching.

We have to use cfg->fc_scope not the final nh_scope value.

Reported-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv4: Cache source address in nexthop entries.

When doing output route lookups, we have to select the source address
if the user has not specified an explicit one.

First, if the route has an explicit preferred source address
specified, then we use that.

Otherwise we search the route's outgoing interface for a suitable
address.

This search can be precomputed and cached at route insertion time.

The only missing part is that we have to refresh this precomputed
value any time addresses are added or removed from the interface, and
this is accomplished by fib_update_nh_saddrs().

Signed-off-by: David S. Miller <davem@davemloft.net>

ixgbe: fix setting and reporting of advertised speeds

Add the ability to set 100/F on x540.
Fix reporting of advertised modes by adding check for phy.autoneg_advertised

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ixgbe: fix spelling errors

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ixgbe: improve logic in ixgbe_init_mbx_params_pf

Use if/then instead of an all-inclusive case statement.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ixgbe: add function description

Add description for ixgbe_init_eeprom_params_X540 and whitespace fix.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ixgbe: Enable flow control pause parameter auto-negotiation support

This patch enables flow control pause parameters auto-negotiation support
to 82599 based 10G Base-T, backplane devices and multi-speed fiber optics
modules at 1G speed

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ixgbe: Add x540 statistic counter definitions

Add defines to accumulate and display x540 PHY statistic counters on
transmit/receive.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ixgbe: clear correct counters for flow control on 82599

The 82599 was not correctly having some of it's counters cleared for flow
control.  This change corrects that.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ixgbe: cleanup PHY init

This change cleans up several situations in which we were either stepping
over possible errors, or calling initialization routines multiple times.
Also includes whitespace fixes where applicable.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ixgbe: add support to FCoE DDP in target mode

Add support to the ndo_fcoe_ddp_target() to allow the Intel 82599 device to
also provide DDP offload capability when the upper FCoE protocol stack is
operating as a target.

Signed-off-by: Yi Zou <yi.zou@intel.com>
Signed-off-by: Kiran Patil <kiran.patil@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

vlan: add support to ndo_fcoe_ddp_target()

Add the new target ddp offload support ndo_fcoe_ddp_target().

Signed-off-by: Yi Zou <yi.zou@intel.com>
Signed-off-by: Kiran Patil <kiran.patil@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

net: add ndo_fcoe_ddp_target() to support FCoE DDP in target mode

The Fiber Channel over Ethernet (FCoE) Direct Data Placement (DDP) can also be
used for FCoE target, where the DDP used for read I/O on an initiator can be
used on an FCoE target to speed up the write I/O to the target from the initiator.
The added ndo_fcoe_ddp_target() works in the similar way as the existing
ndo_fcoe_ddp_setup() to allow the underlying hardware set up the DDP context
accordingly when it gets called from the FCoE target implementation on top
the existing Open-FCoE fcoe/libfc protocol stack so without losing the ability
to provide DDP for read I/O as an initiator, it can also provide DDP offload
to the write I/O coming from the initiator as a target.

Signed-off-by: Yi Zou <yi.zou@intel.com>
Signed-off-by: Kiran Patil <kiran.patil@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ixgbe: fix missing function pointer conversion

In the previous commit:
  commit 5e655105e3e19d746f9e95c514b014c11c3d1b6a
  Author: Don Skidmore <donald.c.skidmore@intel.com>
  Date:   Fri Feb 25 01:58:04 2011 +0000

  ixgbe: add function pointer for semaphore function

there was one release of the semaphore function call which
did not get converted to a function pointer.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

igb: Add stats output for OS2BMC feature on i350 devices

This patch adds statistics output for OS2BMC feature which is configured
by eeprom on capable devices.

Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

e1000e: fix build issue due to undefined reference to crc32_le

kernel build fails with:

drivers/built-in.o: In function `e1000_lv_jumbo_workaround_ich8lan':
(.text+0x3e7a8): undefined reference to `crc32_le'

when CONFIG_CRC32 is not set or does not match the CONFIG_E1000E
selection.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Reviewed-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

af_unix: remove unused struct sockaddr_un cruft

Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: several declared/set but unused fixes

Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

af_packet: struct socket declared/assigned but unused

Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

mcast: net_device dev not used

ip6_mc_source(), ip6_mc_msfilter() as well as ip6_mc_msfget() declare
and assign dev but do not use the variable afterwards.

Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

s2io: fix uninitialized compile warning

drivers/net/s2io.c:7559: warning: ‘tcp_len’ may be used uninitialized in this function

Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bonding: COW before overwriting the destination MAC address

When there is a ptype handler holding a clone of this skb, whose
destination MAC addresse is overwritten, the owner of this handler may
get a corrupted packet.

Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bonding: remove the unused dummy functions when net poll controller isn't enabled

These two functions are only used when net poll controller is enabled.

Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'davem-next.r8169' of git://git./linux/kernel/git/romieu/netdev-2.6

net: allow handlers to be processed for orig_dev

This was there before, I forgot about this. Allows deliveries to
ptype_base handlers registered for orig_dev. I presume this is still
desired.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Reviewed-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

be2net: Add multicast filter capability for Lancer

Lancer requires multicast capability flag set during IFACE_CREATE
for adding multicast filters.

Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: Subramanian Seetharaman <subbu.seetharaman@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

be2net: Disarm CQ and EQ to disable interrupt in Lancer

For Lancer disable interrupts in close by disarming CQs and EQs.
Change the order of calls in be_close to achieve the correct result.

Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: Subramanian Seetharaman <subbu.seetharaman@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

be2net: Remove TX Queue stop in close

Remove TX Queue stop in close

Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: Subramanian Seetharaman <subbu.seetharaman@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

be2net: Change f/w command versions for Lancer

Change f/w command versions for Lancer

Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: Subramanian Seetharaman <subbu.seetharaman@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

be2net: Add error recovery during load for Lancer

Add error recovery during load for Lancer

Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: Subramanian Seetharaman <subbu.seetharaman@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

be2net: Checksum field valid only for TCP/UDP

L4 checksum field is valid only for TCP/UDP packets in Lancer

Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: Subramanian Seetharaman <subbu.seetharaman@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

be2net: Remove ERR compl workaround for Lancer

Workaround added for Lancer in handling RX ERR completion received
when no RX buffers are posted is not needed.

Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: Subramanian Seetharaman <subbu.seetharaman@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv4: Inline fib_semantic_match into check_leaf

This elimiates a lot of pure overhead due to parameter
passing.

Signed-off-by: David S. Miller <davem@davemloft.net>

ipv4: Validate route entry type at insert instead of every lookup.

fib_semantic_match() requires that if the type doesn't signal an
automatic error, it must be of type RTN_UNICAST, RTN_LOCAL,
RTN_BROADCAST, RTN_ANYCAST, or RTN_MULTICAST.

Checking this every route lookup is pointless work.

Instead validate it during route insertion, via fib_create_info().

Also, there was nothing making sure the type value was less than
RTN_MAX, so add that missing check while we're here.

Signed-off-by: David S. Miller <davem@davemloft.net>

netdevice: Convert printk to pr_info in netif_tx_stop_queue

This allows any caller to be prefaced by any specific
pr_fmt to better identify which device driver is using
this function inappropriately.

Add terminating newline.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'batman-adv/next' of git://git.open-mesh.org/ecsv/linux-merge

batman-adv: Disallow regular interface as mesh device

When trying to associate a net_device with another net_device which
already exists, batman-adv assumes that this interface is a fully
initialized batman mesh interface without checking it. The behaviour
when accessing data behind netdev_priv of a random net_device is
undefined and potentially dangerous.

Reported-by: Linus Lüssing <linus.luessing@ascom.ch>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

batman-adv: Remove unused hdr_size variable in route_unicast_packet()

Signed-off-by: Linus Lüssing <linus.luessing@ascom.ch>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

batman-adv: rename batman_if struct to hard_iface

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

batman-adv: rename global if_list to hardif_list

Batman-adv works with "hard interfaces" as well as "soft interfaces".
The new name should better make clear which kind of interfaces this
list stores.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

batman-adv: remove orig_hash spinlock

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

batman-adv: increase refcount in create_neighbor to be consistent

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

batman-adv: Correct rcu refcounting for orig_node

It might be possible that 2 threads access the same data in the same
rcu grace period. The first thread calls call_rcu() to decrement the
refcount and free the data while the second thread increases the
refcount to use the data. To avoid this race condition all refcount
operations have to be atomic.

Reported-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

batman-adv: remove extra layer between hash and hash element - hash bucket

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

batman-adv: separate ethernet comparing calls from hash functions

Note: The function compare_ether_addr() provided by the Linux kernel
requires aligned memory.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

batman-adv: Fix possible buffer overflow in softif neigh list output

When printing the soft interface table the number of entries in the
softif neigh list are first being counted and a fitting buffer
allocated. After that the softif neigh list gets locked again and
the buffer printed - which has the following two issues:

For one thing, the softif neigh list might have grown when reacquiring
the rcu lock, which results in writing outside of the allocated buffer.
Furthermore 31 Bytes are not enough for printing an entry with a vid
of more than 2 digits.

The manual buffering is unnecessary, we can safely print to the seq
directly during the rcu_read_lock().

Signed-off-by: Linus Lüssing <linus.luessing@ascom.ch>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

batman-adv: Increase orig_node refcount before releasing rcu read lock

When unicast_send_skb() is increasing the orig_node's refcount another
thread might have been freeing this orig_node already. We need to
increase the refcount in the rcu read lock protected area to avoid that.

Signed-off-by: Linus Lüssing <linus.luessing@ascom.ch>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

batman-adv: Make bat_priv->curr_gw an rcu protected pointer

The rcu protected macros rcu_dereference() and rcu_assign_pointer()
for the bat_priv->curr_gw need to be used, as well as spin/rcu locking.

Otherwise we might end up using a curr_gw pointer pointing to already
freed memory.

Reported-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Linus Lüssing <linus.luessing@ascom.ch>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

batman-adv: make broadcast seqno operations atomic

Batman-adv could receive several payload broadcasts at the same time
that would trigger access to the broadcast seqno sliding window to
determine whether this is a new broadcast or not. If these incoming
broadcasts are accessing the sliding window simultaneously it could
be left in an inconsistent state. Therefore it is necessary to make
sure this access is atomic.

Reported-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

batman-adv: protect bit operations to count OGMs with spinlock

Reported-by: Linus Lüssing <linus.luessing@saxnet.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

batman-adv: Correct rcu refcounting for batman_if

It might be possible that 2 threads access the same data in the same
rcu grace period. The first thread calls call_rcu() to decrement the
refcount and free the data while the second thread increases the
refcount to use the data. To avoid this race condition all refcount
operations have to be atomic.

Reported-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

batman-adv: Correct rcu refcounting for softif_neigh

It might be possible that 2 threads access the same data in the same
rcu grace period. The first thread calls call_rcu() to decrement the
refcount and free the data while the second thread increases the
refcount to use the data. To avoid this race condition all refcount
operations have to be atomic.

Reported-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

batman-adv: Correct rcu refcounting for gw_node

It might be possible that 2 threads access the same data in the same
rcu grace period. The first thread calls call_rcu() to decrement the
refcount and free the data while the second thread increases the
refcount to use the data. To avoid this race condition all refcount
operations have to be atomic.

Reported-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

batman-adv: Correct rcu refcounting for neigh_node

It might be possible that 2 threads access the same data in the same
rcu grace period. The first thread calls call_rcu() to decrement the
refcount and free the data while the second thread increases the
refcount to use the data. To avoid this race condition all refcount
operations have to be atomic.

Reported-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

batman-adv: protect bonding with rcu locks

bonding / alternating candidates need to be secured by rcu locks
as well. This patch therefore converts the bonding list
from a plain pointer list to a rcu securable lists and references
the bonding candidates.

Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

batman-adv: protect ogm counter arrays with spinlock

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

batman-adv: protect originator nodes with reference counters

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

batman-adv: protect each hash row with rcu locks

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

batman-adv: protect neigh_nodes used outside of rcu_locks with refcounting

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

batman-adv: free neighbors when an interface is deactivated

hardif_disable_interface() calls purge_orig_ref() to immediately free
all neighbors associated with the interface that is going down.
purge_orig_neighbors() checked if the interface status is IF_INACTIVE
which is set to IF_NOT_IN_USE shortly before calling purge_orig_ref().

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

batman-adv: protect neighbor list with rcu locks

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

batman-adv: convert neighbor list to hlist

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

batman-adv: protect neighbor nodes with reference counters

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

r8169: convert to new VLAN model.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Reviewed-by: Jesse Gross <jesse@nicira.com>

r8169: support control of advertising.

This allows "ethtool advertise" to control the speed and duplex
features the device offers the switch.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>

r8169: support the new chips for RTL8105E.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>

ipv4: Remove flowi from struct rtable.

The only necessary parts are the src/dst addresses, the
interface indexes, the TOS, and the mark.

The rest is unnecessary bloat, which amounts to nearly
50 bytes on 64-bit.

Signed-off-by: David S. Miller <davem@davemloft.net>

ipv4: Set rt->rt_iif more sanely on output routes.

rt->rt_iif is only ever inspected on input routes, for example DCCP
uses this to populate a route lookup flow key when generating replies
to another packet.

Therefore, setting it to anything other than zero on output routes
makes no sense.

Signed-off-by: David S. Miller <davem@davemloft.net>

ipv4: Use passed-in protocol in ip_route_newports().

Signed-off-by: David S. Miller <davem@davemloft.net>

ipv4: Get peer more cheaply in rt_init_metrics().

We know this is a new route object, so doing atomics and
stuff makes no sense at all.

Signed-off-by: David S. Miller <davem@davemloft.net>

ipv4: Optimize flow initialization in output route lookup.

We burn a lot of useless cycles, cpu store buffer traffic, and
memory operations memset()'ing the on-stack flow used to perform
output route lookups in __ip_route_output_key().

Only the first half of the flow object members even matter for
output route lookups in this context, specifically:

FIB rules matching cares about:

dst, src, tos, iif, oif, mark

FIB trie lookup cares about:

dst

FIB semantic match cares about:

tos, scope, oif

Therefore only initialize these specific members and elide the
memset entirely.

On Niagara2 this kills about ~300 cycles from the output route
lookup path.

Likely, we can take things further, since all callers of output
route lookups essentially throw away the on-stack flow they use.
So they don't care if we use it as a scratch-pad to compute the
final flow key.

Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>

inetpeer: seqlock optimization

David noticed :

------------------
Eric, I was profiling the non-routing-cache case and something that
stuck out is the case of calling inet_getpeer() with create==0.

If an entry is not found, we have to redo the lookup under a spinlock
to make certain that a concurrent writer rebalancing the tree does
not "hide" an existing entry from us.

This makes the case of a create==0 lookup for a not-present entry
really expensive.  It is on the order of 600 cpu cycles on my
Niagara2.

I added a hack to not do the relookup under the lock when create==0
and it now costs less than 300 cycles.

This is now a pretty common operation with the way we handle COW'd
metrics, so I think it's definitely worth optimizing.
-----------------

One solution is to use a seqlock instead of a spinlock to protect struct
inet_peer_base.

After a failed avl tree lookup, we can easily detect if a writer did
some changes during our lookup. Taking the lock and redo the lookup is
only necessary in this case.

Note: Add one private rcu_deref_locked() macro to place in one spot the
access to spinlock included in seqlock.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'for-davem' of ssh:///linux/kernel/git/linville/wireless-next-2.6

Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-next-2.6 into for-davem

Merge branch 'master' of /linux/kernel/git/davem/net-2.6

Conflicts:
drivers/net/bnx2x/bnx2x.h

Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  DNS: Fix a NULL pointer deref when trying to read an error key [CVE-2011-1076]

Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (42 commits)
  MAINTAINERS: Add Andy Gospodarek as co-maintainer.
  r8169: disable ASPM
  RxRPC: Fix v1 keys
  AF_RXRPC: Handle receiving ACKALL packets
  cnic: Fix lost interrupt on bnx2x
  cnic: Prevent status block race conditions with hardware
  net: dcbnl: check correct ops in dcbnl_ieee_set()
  e1000e: disable broken PHY wakeup for ICH10 LOMs, use MAC wakeup instead
  igb: fix sparse warning
  e1000: fix sparse warning
  netfilter: nf_log: avoid oops in (un)bind with invalid nfproto values
  dccp: fix oops on Reset after close
  ipvs: fix dst_lock locking on dest update
  davinci_emac: Add Carrier Link OK check in Davinci RX Handler
  bnx2x: update driver version to 1.62.00-6
  bnx2x: properly calculate lro_mss
  bnx2x: perform statistics "action" before state transition.
  bnx2x: properly configure coefficients for MinBW algorithm (NPAR mode).
  bnx2x: Fix ethtool -t link test for MF (non-pmf) devices.
  bnx2x: Fix nvram test for single port devices.
  ...

Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  block: kill loop_mutex
  blktrace: Remove blk_fill_rwbs_rq.
  block: blk-flush shouldn't call directly into q->request_fn() __blk_run_queue()
  block: add @force_kblockd to __blk_run_queue()
  block: fix kernel-doc format for blkdev_issue_zeroout
  blk-throttle: Do not use kblockd workqueue for throtl work

Merge branch 'i_nlink' of git://git./linux/kernel/git/viro/vfs-2.6

* 'i_nlink' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  hfs: fix rename() over non-empty directory
  udf: fix i_nlink limit
  fix reiserfs mkdir() breakage
  exofs: i_nlink races in rename()
  nilfs2: i_nlink races in rename()
  minix: i_nlink races in rename()
  ufs: i_nlink races in rename()
  sysv: i_nlink races in rename()

DNS: Fix a NULL pointer deref when trying to read an error key [CVE-2011-1076]

When a DNS resolver key is instantiated with an error indication, attempts to
read that key will result in an oops because user_read() is expecting there to
be a payload - and there isn't one [CVE-2011-1076].

Give the DNS resolver key its own read handler that returns the error cached in
key->type_data.x[0] as an error rather than crashing.

Also make the kenter() at the beginning of dns_resolver_instantiate() limit the
amount of data it prints, since the data is not necessarily NUL-terminated.

The buggy code was added in:

commit 4a2d789267e00b5a1175ecd2ddefcc78b83fbf09
Author: Wang Lei <wang840925@gmail.com>
Date:   Wed Aug 11 09:37:58 2010 +0100
Subject: DNS: If the DNS server returns an error, allow that to be cached [ver #2]

This can trivially be reproduced by any user with the following program
compiled with -lkeyutils:

#include <stdlib.h>
#include <keyutils.h>
#include <err.h>
static char payload[] = "#dnserror=6";
int main()
{
key_serial_t key;
key = add_key("dns_resolver", "a", payload, sizeof(payload),
      KEY_SPEC_SESSION_KEYRING);
if (key == -1)
err(1, "add_key");
if (keyctl_read(key, NULL, 0) == -1)
err(1, "read_key");
return 0;
}

What should happen is that keyctl_read() reports error 6 (ENXIO) to the user:

dns-break: read_key: No such device or address

but instead the kernel oopses.

This cannot be reproduced with the 'keyutils add' or 'keyutils padd' commands
as both of those cut the data down below the NUL termination that must be
included in the data.  Without this dns_resolver_instantiate() will return
-EINVAL and the key will not be instantiated such that it can be read.

The oops looks like:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
IP: [<ffffffff811b99f7>] user_read+0x4f/0x8f
PGD 3bdf8067 PUD 385b9067 PMD 0
Oops: 0000 [#1] SMP
last sysfs file: /sys/devices/pci0000:00/0000:00:19.0/irq
CPU 0
Modules linked in:

Pid: 2150, comm: dns-break Not tainted 2.6.38-rc7-cachefs+ #468                  /DG965RY
RIP: 0010:[<ffffffff811b99f7>]  [<ffffffff811b99f7>] user_read+0x4f/0x8f
RSP: 0018:ffff88003bf47f08  EFLAGS: 00010246
RAX: 0000000000000001 RBX: ffff88003b5ea378 RCX: ffffffff81972368
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88003b5ea378
RBP: ffff88003bf47f28 R08: ffff88003be56620 R09: 0000000000000000
R10: 0000000000000395 R11: 0000000000000002 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: ffffffffffffffa1
FS:  00007feab5751700(0000) GS:ffff88003e000000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000010 CR3: 000000003de40000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process dns-break (pid: 2150, threadinfo ffff88003bf46000, task ffff88003be56090)
Stack:
 ffff88003b5ea378 ffff88003b5ea3a0 0000000000000000 0000000000000000
 ffff88003bf47f68 ffffffff811b708e ffff88003c442bc8 0000000000000000
 00000000004005a0 00007fffba368060 0000000000000000 0000000000000000
Call Trace:
 [<ffffffff811b708e>] keyctl_read_key+0xac/0xcf
 [<ffffffff811b7c07>] sys_keyctl+0x75/0xb6
 [<ffffffff81001f7b>] system_call_fastpath+0x16/0x1b
Code: 75 1f 48 83 7b 28 00 75 18 c6 05 58 2b fb 00 01 be bb 00 00 00 48 c7 c7 76 1c 75 81 e8 13 c2 e9 ff 4c 8b b3 e0 00 00 00 4d 85 ed <41> 0f b7 5e 10 74 2d 4d 85 e4 74 28 e8 98 79 ee ff 49 39 dd 48
RIP  [<ffffffff811b99f7>] user_read+0x4f/0x8f
 RSP <ffff88003bf47f08>
CR2: 0000000000000010

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
cc: Wang Lei <wang840925@gmail.com>
Signed-off-by: James Morris <jmorris@namei.org>

netlink: kill eff_cap from struct netlink_skb_parms

Netlink message processing in the kernel is synchronous these days,
capabilities can be checked directly in security_netlink_recv() from
the current process.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Reviewed-by: James Morris <jmorris@namei.org>
[chrisw: update to include pohmelfs and uvesafb]
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

eql: Convert printks to pr_<level> and netdev_<level>

Add pr_fmt.

Removed trailing "\n" from version,
add back via pr_info("%s\n", version);

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

MAINTAINERS: Add Andy Gospodarek as co-maintainer.

Acked-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

mii: Convert printks to netdev_info

Add a bit more data to the output.
Convert string speeds to integer.
Object size reduced a tiny bit.
$ size drivers/net/mii.o*
   text    data     bss     dec     hex filename
   4155      56    1000    5211    145b drivers/net/mii.o.new
   4184      56    1000    5240    1478 drivers/net/mii.o.old

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mv643xx_eth: Use netdev_<level> and pr_<level>

Use the current logging styles.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

tlan: Use pr_fmt, pr_<level> and netdev_<level>

Neatening and standardization to the current logging mechanisms.
Miscellaneous speen/speed typo correction.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>

tlan: Remove changelog

As it isn't necessary nor really useful any longer.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>

benet: use GFP_KERNEL allocations when possible

Extend be_alloc_pages() with a gfp parameter, so that we use GFP_KERNEL
allocations instead of GFP_ATOMIC when not running in softirq context.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Ajit Khaparde <ajit.khaparde@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: zero proper structure size for geometry calls

Merge branch 'for-linus' of git://git./linux/kernel/git/ryusuke/nilfs2

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
  nilfs2: fix regression that i-flag is not set on changeless checkpoints

tun: Convert logging messages to pr_<level> and tun_debug

Use the current logging forms with pr_fmt.
Convert DBG macro to tun_debug, use netdev_printk as well.
Add printf verification when TUN_DEBUG not defined.
Miscellaneous comment typo fix.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: add Faraday FTMAC100 10/100 Ethernet driver

FTMAC100 Ethernet Media Access Controller supports 10/100 Mbps and
MII.  This driver has been working on some ARM/NDS32 SoC's including
Faraday A320 and Andes AG101.

Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: Use ERR_CAST in addrconf_dst_alloc.

Signed-off-by: David S. Miller <davem@davemloft.net>

r8169: disable ASPM

For some time is known that ASPM is causing troubles on r8169, i.e. make
device randomly stop working without any errors in dmesg.

Currently Tomi Leppikangas reports that system with r8169 device hangs
with MCE errors when ASPM is enabled:
https://bugzilla.redhat.com/show_bug.cgi?id=642861#c4

Lets disable ASPM for r8169 devices at all, to avoid problems with
r8169 PCIe devices at least for some users.

Reported-by: Tomi Leppikangas <tomi.leppikangas@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'master' of /linux/kernel/git/jkirsher/net-next-2.6

ipv4: Fix __ip_dev_find() to use ifa_local instead of ifa_address.

Reported-by: Stephen Hemminger <shemminger@vyatta.com>
Reported-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>

net_sched: reduce fifo qdisc size

Because of various alignements [SLUB / qdisc], we use 512 bytes of
memory for one {p|b}fifo qdisc, instead of 256 bytes on 64bit arches and
192 bytes on 32bit ones.

Move the "u32 limit" inside "struct Qdisc" (no impact on other qdiscs)

Change qdisc_alloc(), first trying a regular allocation before an
oversized one.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

netlink: kill loginuid/sessionid/sid members from struct netlink_skb_parms

Netlink message processing in the kernel is synchronous these days, the
session information can be collected when needed.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv4: Fix crash in dst_release when udp_sendmsg route lookup fails.

As reported by Eric:

[11483.697233] IP: [<c12b0638>] dst_release+0x18/0x60
 ...
[11483.697741] Call Trace:
[11483.697764]  [<c12fc9d2>] udp_sendmsg+0x282/0x6e0
[11483.697790]  [<c12a1c01>] ? memcpy_toiovec+0x51/0x70
[11483.697818]  [<c12dbd90>] ? ip_generic_getfrag+0x0/0xb0

The pointer passed to dst_release() is -EINVAL, that's because
we leave an error pointer in the local variable "rt" by accident.

NULL it out to fix the bug.

Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>