Rafał Miłecki [Tue, 18 Jul 2023 09:26:37 +0000 (11:26 +0200)]
ramips: fix Ubiquiti EdgeRouter X's MAC address for gmac1
This fixes:
[ 0.586649] OF: /ethernet@
1e100000/mac@1: #nvmem-cell-cells = 1 found 0
Fixes: 28b6224104cc ("ramips: use fixed layout cell "mac-base" for Ubiquiti EdgeRouter X")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Felix Fietkau [Mon, 17 Jul 2023 12:32:21 +0000 (14:32 +0200)]
base-files: fix duplicate wifi radio sections when using phy renaming
The duplicate sections are caused by a race condition at boot, when board.json
is not available. In that case, the final phy name cannot be resolved, and extra
sections referring to the path are created.
Fix this by making sure that wifi config is not being run before board.json
is created.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Michał Kwiatek [Wed, 12 Jul 2023 19:39:39 +0000 (21:39 +0200)]
ath11k-firmware: update to stable WLAN.HK.2.9.0.1-01837
Changelog from quic:
Bug fixes, stability improvements from previous releases
are present. There are no backward comatibility issues
with this release.
Tested-by: Michał Kwiatek <michal@kwiatek.it> # Xiaomi AX3600
Signed-off-by: Michał Kwiatek <michal@kwiatek.it>
[ improve commit description ]
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Lamparter [Sat, 15 Jul 2023 18:58:10 +0000 (20:58 +0200)]
sdk: update SDK Makefile
the SDK's Makefile referenced the old file name.
Update it too.
Fixes: 2d5f7035cf45 ("sdk: rename README")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Pawel Dembicki [Fri, 7 Jul 2023 11:51:49 +0000 (13:51 +0200)]
realtek: add support for HPE 1920-8g-poe+
Hardware information:
---------------------
- RTL8380 SoC
- 8 Gigabit RJ45 PoE ports (built-in RTL8218B)
- 2 SFP ports (built-in SerDes)
- RJ45 RS232 port on front panel
- 32 MiB NOR Flash
- 128 MiB DDR3 DRAM
- PT7A7514 watchdog
- PoE chips: Nuvoton M0516LDE + BCM59121
Known issues:
---------------------
- PoE LEDs are uncontrolled.
(Manual taken from
f2f09bc00280)
Booting initramfs image:
------------------------
- Prepare a FTP or TFTP server serving the OpenWrt initramfs image and
connect the server to a switch port.
- Connect to the console port of the device and enter the extended
boot menu by typing Ctrl+B when prompted.
- Choose the menu option "<3> Enter Ethernet SubMenu".
- Set network parameters via the option "<5> Modify Ethernet Parameter".
Enter the FTP/TFTP filename as "Load File Name" ("Target File Name"
can be left blank, it is not required for booting from RAM). Note that
the configuration is saved on flash, so it only needs to be done once.
- Select "<1> Download Application Program To SDRAM And Run".
Initial installation:
---------------------
- Boot an initramfs image as described above, then use sysupgrade to
install OpenWrt permanently. After initial installation, the
bootloader needs to be configured to load the correct image file
- Enter the extended boot menu again and choose "<4> File Control",
then select "<2> Set Application File type".
- Enter the number of the file "openwrt-kernel.bin" (should be 1), and
use the option "<1> +Main" to select it as boot image.
- Choose "<0> Exit To Main Menu" and then "<1> Boot System".
NOTE: The bootloader on these devices can only boot from the VFS
filesystem which normally spans most of the flash. With OpenWrt, only
the first part of the firmware partition contains a valid filesystem,
the rest is used for rootfs. As the bootloader does not know about this,
you must not do any file operations in the bootloader, as this may
corrupt the OpenWrt installation (selecting the boot image is an
exception, as it only stores a flag in the bootloader data, but doesn't
write to the filesystem).
Example PoE config file (/etc/config/poe):
---------------------
config global
option budget '180'
config port
option enable '1'
option id '1'
option name 'lan8'
option poe_plus '1'
option priority '2'
config port
option enable '1'
option id '2'
option name 'lan7'
option poe_plus '1'
option priority '2'
config port
option enable '1'
option id '3'
option name 'lan6'
option poe_plus '1'
option priority '2'
config port
option enable '1'
option id '4'
option name 'lan5'
option poe_plus '1'
option priority '2'
config port
option enable '1'
option id '5'
option name 'lan4'
option poe_plus '1'
option priority '2'
config port
option enable '1'
option id '6'
option name 'lan3'
option poe_plus '1'
option priority '2'
config port
option enable '1'
option id '7'
option name 'lan2'
option poe_plus '1'
option priority '2'
config port
option enable '1'
option id '8'
option name 'lan1'
option poe_plus '1'
option priority '2'
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Carsten Spieß [Wed, 12 Jul 2023 08:24:11 +0000 (10:24 +0200)]
octeon: ubnt-edgerouter-4/6p: devicetree cleanup
removed redundant eeprom partition nodes from
cn7130_ubnt_edgerouter-4.dts and cn7130_ubnt_edgerouter-6p.dts
as they are identically defined in cn7130_ubnt_edgerouter-e300.dtsi.
Signed-off-by: Carsten Spieß <mail@carsten-spiess.de>
(integrated eeprom referenced node in the .dtsi)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Carsten Spieß [Wed, 12 Jul 2023 08:16:27 +0000 (10:16 +0200)]
octeon: ubnt-edgerouter-e300: fix missing MTD partition
The MAC addresses should be read from 3rd MTD partition,
but only two MTD partitions are populated.
To fix it, a partitions node has to surround the partition
nodes in device tree.
Tested with Edgerouter 6P
Signed-off-by: Carsten Spieß <mail@carsten-spiess.de>
(fixed checkpatch complains)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Carsten Spieß [Wed, 12 Jul 2023 08:41:25 +0000 (10:41 +0200)]
octeon: ubnt-edgerouter-e300: fix LED settings
LEDs on Edgerouter 6P didn't work correctly:
blue /white LED swapped, on/off state inverted
Fixed in device tree:
swap the GPIO ports for power:blue and power:white LEDs
change LED activity from LOW to HIGH
Tested on Edgerouter 6P
Signed-off-by: Carsten Spieß <mail@carsten-spiess.de>
Christian Svensson [Sun, 2 Jul 2023 22:31:59 +0000 (00:31 +0200)]
octeon: n821: add Cisco vEdge 1000 base
This is the first commit to introduce the base for the N821 board used
in Cisco vEdge 1000.
This commit does not include the custom CPLD drivers but rather
everything else that is already present in the upstream kernel.
This results in an image that boots, but e.g. the SFP ports are not
usable.
Hardware:
- CPU: Cavium Networks CN6130, 4 cores @ 1.0 GHz
- Flash:
- 16 MiB SPI NOR presented as 2x8 MiB for A/B boot recovery
- 8192 MiB eMMC
- RAM: 4096 MiB
- Ethernet 1Gbit ports: 1x
- Ethernet SFP ports: 8x
- USB ports: 2x 3.0 Type-A on front panel
- Serial: Two, one internal and one external
- JTAG: Yes
- LED count: 18x
- Button count: 1x
- GPIOs: 1x
- Power: 2x redundant DC 12V barrel plug
- Extra: Slot for SD card on front
See the OpenWrt wiki for more hardware details.
Installation:
- Flash squashfs to /dev/sda2 and put kernel on /dev/sda1.
- Update uboot's bootcmd environment variable to match.
Full installation guide will be added to OpenWrt wiki when sysupgrade
support is added.
Signed-off-by: Christian Svensson <blue@cmd.nu>
Signed-off-by: Tommy Nevtelen <tommy@nevtelen.com>
Tested-by: Viktor Ekmark <viktor@ekmark.se>
Tested-by: Daniel Wennberg <github@networkninja.se>
Christian Svensson [Tue, 4 Jul 2023 22:48:46 +0000 (00:48 +0200)]
octeon: enable AT24 unconditionally
For the N821 platform we need to load the AT24 EEPROM driver before
everything else in order for the MAC address to be available at
driver initialization time.
Signed-off-by: Christian Svensson <blue@cmd.nu>
Adones Pitogo [Tue, 11 Jul 2023 05:31:50 +0000 (13:31 +0800)]
build: fix generation of large .vdi images
Instead of loading the whole image into the memory when generating the
sha256 sum, we load the file in chunks and update the hash incrementally
to avoid MemoryError in python. Also remove a stray empty line.
Fixes: #13056
Signed-off-by: Adones Pitogo <pitogo.adones@gmail.com>
(mention empty line removal, adds Fixes from PR)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Tomasz Maciej Nowak [Tue, 11 Jul 2023 14:09:49 +0000 (16:09 +0200)]
sdk: rename README
'help' target fails not finding a file, so follow up on a change[2] made
as a fix for main README[1].
1.
d0113711a31f ("README: port to 21st century")
2.
751486b31fd9 ("build: fix README.md reference after rename")
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Tomasz Maciej Nowak [Tue, 11 Jul 2023 14:06:21 +0000 (16:06 +0200)]
ib: split out processing user provided packages
Some device recipes remove default target packages. If user tries to add
them back they will be ignored, since packages list is processed in one
go. Process the device recipe packages first and do user ones later, so
additions won't get filtered out.
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Javier Marcet [Sun, 9 Jul 2023 15:55:48 +0000 (17:55 +0200)]
perf: opt-out of lto usage
This fixes building with USE_LTO enabled:
mold: error: undefined symbol: __memset
>>> referenced by <artificial>
>>> ./tmp/ccsgR7G6.ltrans10.ltrans.o
mold: error: undefined symbol: memset_orig
>>> referenced by <artificial>
>>> ./tmp/ccsgR7G6.ltrans10.ltrans.o
mold: error: undefined symbol: perf_regs_load
>>> referenced by <artificial>
>>> ./tmp/ccsgR7G6.ltrans15.ltrans.o:(test_dwarf_unwind__thread)
mold: error: undefined symbol: memset_erms
>>> referenced by <artificial>
>>> ./tmp/ccsgR7G6.ltrans10.ltrans.o
mold: error: undefined symbol: memcpy_orig
>>> referenced by <artificial>
>>> ./tmp/ccsgR7G6.ltrans10.ltrans.o
mold: error: undefined symbol: memcpy_erms
>>> referenced by <artificial>
>>> ./tmp/ccsgR7G6.ltrans10.ltrans.o
mold: error: undefined symbol: __memcpy
>>> referenced by <artificial>
>>> ./tmp/ccsgR7G6.ltrans10.ltrans.o
collect2: error: ld returned 1 exit status
make[5]: *** [Makefile.perf:670: ../openwrt/linux/tools/perf-target-x86_64_musl/perf] Error 1
make[4]: *** [Makefile.perf:238: sub-make] Error 2
make[3]: *** [Makefile:70: all] Error 2
make[2]: *** [Makefile:84: ./build_dir/target-x86_64_musl/linux-x86_64/linux-5.15.120/tools/perf-target-x86_64_musl/.built] Error 2
make[2]: Leaving directory './package/devel/perf'
time: package/devel/perf/compile#55.88#6.78#12.89
ERROR: package/devel/perf failed to build.
Signed-off-by: Javier Marcet <javier@marcet.info>
Javier Marcet [Sun, 9 Jul 2023 15:55:35 +0000 (17:55 +0200)]
grub2: opt-out of gc-sections usage
This fixes building with USE_GC_SECTIONS enabled:
./staging_dir/toolchain-x86_64_gcc-12.3.0_musl/bin/../lib/gcc/x86_64-openwrt-linux-musl/12.3.0/../../../../x86_64-openwrt-linux-musl/bin/ld.bfd: --gc-sections requires a defined symbol root specified by -e or -u
collect2: error: ld returned 1 exit status
make[4]: *** [Makefile:27665: disk.module] Error 1
make[4]: Leaving directory './build_dir/target-x86_64_musl/linux-x86_64/grub-efi/grub-2.06/grub-core'
make[3]: *** [Makefile:26916: all] Error 2
make[3]: Leaving directory './build_dir/target-x86_64_musl/linux-x86_64/grub-efi/grub-2.06/grub-core'
make[2]: *** [Makefile:205: ./build_dir/target-x86_64_musl/linux-x86_64/grub-efi/grub-2.06/.built] Error 2
make[2]: Leaving directory './package/boot/grub2'
time: package/boot/grub2/efi/compile#3.21#1.34#4.28
ERROR: package/boot/grub2 failed to build (build variant: efi).
Signed-off-by: Javier Marcet <javier@marcet.info>
Rafał Miłecki [Fri, 14 Jul 2023 10:35:26 +0000 (12:35 +0200)]
bcm53xx: backport DT changes queued for v6.6
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Fri, 14 Jul 2023 09:43:07 +0000 (11:43 +0200)]
bcm4908: drop accidentally pushed 6.1 hack patches
Fixes: 2953d3c15677 ("bcm4908: add testing support for kernel 6.1")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Fri, 14 Jul 2023 08:49:04 +0000 (10:49 +0200)]
ramips: use fixed layout cell "mac-base" for Ubiquiti EdgeRouter X
This drops a use of downstream "mac-address-increment".
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Fri, 14 Jul 2023 08:27:54 +0000 (10:27 +0200)]
ramips: use fixed layout cell "mac-base" for Netgear R6220
This drops a use of downstream "mac-address-increment".
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Tue, 9 May 2023 13:29:48 +0000 (15:29 +0200)]
ramips: set Netgear R6220 MAC NVMEM cell directly in the part node
There is no need to use reference if original node it specified in
exactly the same file. This is a minor cleanup simplifying DTS code.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Fri, 14 Jul 2023 06:19:04 +0000 (08:19 +0200)]
bcm4908: add testing support for kernel 6.1
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Fri, 14 Jul 2023 06:11:50 +0000 (08:11 +0200)]
kernel: make CFE bootfs MTD parser available for ARCH_BCMBCA
It's a new Broadcom symbol introduced in v6.0.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Felix Fietkau [Fri, 14 Jul 2023 09:20:30 +0000 (11:20 +0200)]
mt76: update to the latest version
bb3937d5c3e0 wifi: mt76: mt7915: remove VHT160 capability on MT7915
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 14 Jul 2023 08:01:30 +0000 (10:01 +0200)]
hostapd: add fix for dealing with VHT 160 MHz via ext nss bw
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Rafał Miłecki [Thu, 13 Jul 2023 17:39:42 +0000 (19:39 +0200)]
kernel: nvmem: fix "fixed-layout" & support "mac-base"
DT binding for MAC cells in fixed layout was upstream approved and
accepted. Add support for it. This can replace quite some of our
downstream hacks.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Arınç ÜNAL [Sat, 17 Jun 2023 18:59:26 +0000 (21:59 +0300)]
ramips: add wan2 support for MQmaker WiTi
The PHY of the wan2 port on MQmaker WiTi is wired to the second MAC of the
SoC. Rename the wan interface to wan1 and define it under the switch node,
effectively disabling the PHY muxing of the MT7530 switch's phy4.
Define the PHY of the wan2 port and adjust the gmac1 node accordingly. Now
that the PHY muxing feature is not being used anymore, the wan2 port can be
used to achieve 2 Gbps total bandwidth to the CPU.
Tested-by: Demetris Ierokipides <ierokipides.dem@gmail.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Arınç ÜNAL [Sat, 17 Jun 2023 16:16:20 +0000 (19:16 +0300)]
ramips: rename to GnuBee GB-PC1 and GnuBee GB-PC2
Rename GB-PC1 to GnuBee GB-PC1, and GB-PC2 to GnuBee GB-PC2. Let's not make
naming exceptions because of marketing whims.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Matthias Van Parys [Tue, 11 Jul 2023 08:47:53 +0000 (10:47 +0200)]
fortify-headers: add __extension__ mark to strings.h
Add the __extension__ mark before #include_next in strings.h
to avoid a compiler error when -pedantic is enabled.
This has been done for all other headers in the past.
Signed-off-by: Matthias Van Parys <matthias.vanparys@softathome.com>
Daniel Golle [Mon, 12 Jun 2023 03:07:57 +0000 (04:07 +0100)]
scripts/mkits.sh: DT overlays don't need a loadaddr
DT overlays do not need relocation in order to be applied, so drop
defining the load address for dtbos.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
John Audia [Sun, 9 Jul 2023 20:01:47 +0000 (16:01 -0400)]
linux-firmware: update to
20230625
Change from git log --oneline:
ee91452d (tag:
20230625) Makefile, copy-firmware: support xz/zstd compressed firmware
ad2ce8be copy-firmware: silence the last shellcheck warnings
67bf50e7 copy-firmware: drop obsolete backticks, quote
77f31a80 copy-firmware: tweak sed invocation
40fa2b20 copy-firmware: quote deskdir and dirname
77f92e0b check_whence: error if symlinks are in-tree
f2671b1f check_whence: error if File: is actually a link
4b539e7a check_whence: strip quotation marks
32693d3b linux-firmware: wilc1000: update WILC1000 firmware to v16.0
109b23c5 ice: update ice DDP wireless_edge package to 1.3.10.0
ade163aa amdgpu: DMCUB updates for DCN 3.1.4 and 3.1.5
045b2136 amdgpu: update DMCUB to v0.0.172.0 for various AMDGPU ASICs
5a1842ce Merge branch 'rb3-update' of https://github.com/lumag/linux-firmware
2f81bd9f fix broken cirrus firmware symlinks
01a7a844 qcom: Update the microcode files for Adreno a630 GPUs.
94120467 qcom: sdm845: rename the modem firmware
1c599488 qcom: sdm845: update remoteproc firmware
1cd1c871 rtl_bt: Update RTL8852A BT USB firmware to 0xDAC7_480D
55e74485 rtl_bt: Update RTL8852C BT USB firmware to 0x040D_7225
9dbd8ec2 amdgpu: DMCUB updates for various AMDGPU asics
9a47adc7 Merge branch 'mtl_huc_v8.5.0' of git://anongit.freedesktop.org/drm/drm-firmware
eb3ae841 linux-firmware: update firmware for MT7922 WiFi device
5ce06b9e linux-firmware: update firmware for MT7921 WiFi device
2c50361c linux-firmware: update firmware for mediatek bluetooth chip (MT7922)
185f49df linux-firmware: update firmware for mediatek bluetooth chip (MT7921)
05f94af7 Merge branch 'v2.0.21478' of https://github.com/yunfei-mtk/linux_fw_scp
5de33fb4 i915: Add HuC v8.5.0 for MTL
795aea91 mediatek: Update mt8195 SCP firmware to support hevc
fc90c59b Merge branch 'db410c' of https://github.com/lumag/linux-firmware
9d4c9a52 qcom: apq8016: add Dragonboard 410c WiFi and modem firmware
1f9667eb Merge branch 'for-upstream' of http://git.chelsio.net/pub/git/linux-firmware
b544e2b0 Merge branch 'for-upstream' of https://github.com/CirrusLogic/linux-firmware
244d6b5c cirrus: Add firmware for new Asus ROG Laptops
d11ae984 brcm: Add symlinks from Pine64 devices to AW-CM256SM.txt
1c513ec7 amdgpu: Update GC 11.0.1 and 11.0.4
8449fcd0 Merge https://github.com/pkshih/linux-firmware
c10facaf rtw89: 8851b: add firmware v0.29.41.0
1ba3519e Merge branch 'dev-queue' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/firmware
2e775450 amdgpu: update yellow carp firmware for amd.5.5 release
5eccb3c1 amdgpu: update navi14 firmware for amd.5.5 release
c70d3c3b amdgpu: update navi12 firmware for amd.5.5 release
0e4f17cc amdgpu: update vega20 firmware for amd.5.5 release
413348f3 amdgpu: update vega12 firmware for amd.5.5 release
c167587d amdgpu: update navi10 firmware for amd.5.5 release
3c98630a amdgpu: update vega10 firmware for amd.5.5 release
d13ef0cb amdgpu: update PSP 13.0.11 firmware for amd.5.5 release
31f8f526 amdgpu: update GC 11.0.4 firmware for amd.5.5 release
f0ce7026 amdgpu: update SDMA 6.0.1 firmware for amd.5.5 release
47424464 amdgpu: update PSP 13.0.4 firmware for amd.5.5 release
60dc78a7 amdgpu: update GC 11.0.1 firmware for amd.5.5 release
ba70041c amdgpu: update 13.0.8 firmware for amd.5.5 release
9c48881f amdgpu: update GC 10.3.7 firmware for amd.5.5 release
bb4d7250 amdgpu: update vangogh firmware for amd.5.5 release
102a4138 amdgpu: update VCN 4.0.4 firmware for amd.5.5 release
a7fe4aa1 amdgpu: update SMU 13.0.7 firmware for amd.5.5 release
80b2d561 amdgpu: update PSP 13.0.7 firmware for amd.5.5 release
a5d7b4df amdgpu: update GC 11.0.2 firmware for amd.5.5 release
c1db00c5 amdgpu: update renoir firmware for amd.5.5 release
683c91f7 amdgpu: update VCN 4.0.0 firmware for amd.5.5 release
39d6fcc7 amdgpu: update SMU 13.0.0 firmware for amd.5.5 release
56832557 amdgpu: update PSP 13.0.0 firmware for amd.5.5 release
ffe1a41e amdgpu: update GC 11.0.0 firmware for amd.5.5 release
72d525d7 amdgpu: update green sardine firmware for amd.5.5 release
ceba765d amdgpu: update beige goby firmware for amd.5.5 release
95eb53c9 amdgpu: update dimgrey cavefish firmware for amd.5.5 release
909cef98 amdgpu: update arcturus firmware for amd.5.5 release
91251d16 amdgpu: update vcn 3.1.2 firmware for amd.5.5 release
9eaff866 amdgpu: update psp 13.0.5 firmware for amd.5.5 release
44772528 amdgpu: update GC 10.3.6 firmware for amd.5.5 release
3bffc9f8 amdgpu: update navy flounder firmware for amd.5.5 release
3b920773 amdgpu: update sienna cichlid firmware for amd.5.5 release
84d5550e amdgpu: update aldebaran firmware for amd.5.5 release
dcd30473 amdgpu: DMCUB updates for various AMDGPU asics
c9e4034a ice: update ice DDP comms package to 1.3.40.0
601c1813 Merge https://github.com/pkshih/linux-firmware
08b854f0 rtlwifi: Add firmware v6.0 for RTL8192FU
b72c69dd rtlwifi: Update firmware for RTL8188EU to v28.0
51290942 (tag:
20230515) Merge branch 'main' of https://github.com/CirrusLogic/linux-firmware
Signed-off-by: John Audia <therealgraysky@proton.me>
Oskari Rauta [Tue, 11 Jul 2023 18:06:30 +0000 (21:06 +0300)]
util-linux: enable colrm util as package
colrm is already built, package just isn't generated.
colrm can be used to remove columns from file/stdin.
Use cases vary, personally I needed it because I build openwrt
natively - and wolfssl configure script wants either colrm, or cut
but busybox's cut isn't accepted.
Built: x86_64, latest git
Tested: x86_64, latest git
Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>
Felix Fietkau [Tue, 11 Jul 2023 12:38:06 +0000 (14:38 +0200)]
mac80211: add fix for receiving STP frames on mesh
Fix length in ethernet header
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Rafał Miłecki [Tue, 11 Jul 2023 08:30:08 +0000 (10:30 +0200)]
bcm53xx: backport DT changes from v6.5
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Tue, 11 Jul 2023 07:37:38 +0000 (09:37 +0200)]
bcm53xx: drop Linksys EA6500 V2 fix for RAM from 6.1
This patch is ready and easy to upstream but noone is willing to take
care of it. Drop it (as requested) to simplify maintenance.
Link: https://github.com/openwrt/openwrt/pull/10940#issuecomment-1318157072
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Mon, 10 Jul 2023 09:38:23 +0000 (11:38 +0200)]
kernel: bgmac: fix regressed support for BCM53573 SoCs
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Mon, 10 Jul 2023 09:38:01 +0000 (11:38 +0200)]
bcm47xx: fix bgmac MTU patch filename
Fixes: 4970dd027bce ("bcm47xx: revert bgmac back to the old limited max frame size")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Daniel Golle [Mon, 12 Jun 2023 03:06:40 +0000 (04:06 +0100)]
uboot-mediatek: support classic uImage.FIT with internal images in imszb
The side-effect and main motivation is to also drop the FIT structure size
limit because with multiple device tree overlays it may easily grow beyond
the previous 4kB limit in the future.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Wenli Looi [Sat, 1 Jul 2023 17:46:15 +0000 (17:46 +0000)]
ath79: add support for ASUS RT-AC59U / ZenWiFi CD6
ASUS RT-AC59U / RT-AC59U v2 are wi-fi routers with a large number of
alternate names, including RT-AC1200GE, RT-AC1300G PLUS, RT-AC1500UHP,
RT-AC57U v2/v3, RT-AC58U v2/v3, and RT-ACRH12.
ASUS ZenWiFi AC Mini(CD6) is a mesh wifi system. The unit labeled CD6R
is the router, and CD6N is the node.
Hardware:
- SoC: QCN5502
- RAM: 128 MiB
- UART: 115200 baud (labeled on boards)
- Wireless:
- 2.4GHz: QCN5502 on-chip 4x4 802.11b/g/n
currently unsupported due to missing support for QCN550x in ath9k
- 5GHz: QCA9888 pcie 5GHz 2x2 802.11a/n/ac
- Flash: SPI NOR
- RT-AC59U / CD6N: 16 MiB
- RT-AC59U v2 / CD6R: 32 MiB
- Ethernet: gigabit
- RT-AC59U / RT-AC59U v2: 4x LAN 1x WAN
- CD6R: 3x LAN 1x WAN
- CD6N: 2x LAN
- USB:
- RT-AC59U / RT-AC59U v2: 1 port USB 2.0
- CD6R / CD6N: none
WiFi calibration data contains valid MAC addresses.
The initramfs image is uncompressed because I was unable to boot a
compressed initramfs from memory (gzip or lzma). Booting a compressed
image from flash works fine.
Installation:
To install without opening the case:
- Set your computer IP address to 192.168.1.10/24
- Power up with the Reset button pressed
- Release the Reset button after about 5 seconds or until you see the
power LED blinking slowly
- Upload OpenWRT factory image via TFTP client to 192.168.1.1
Revert to stock firmware using the same TFTP method.
Signed-off-by: Wenli Looi <wlooi@ucalgary.ca>
Wenli Looi [Sat, 1 Jul 2023 17:37:17 +0000 (17:37 +0000)]
build: add ALT5 vendor/model/variant
This allows adding another device variant.
Signed-off-by: Wenli Looi <wlooi@ucalgary.ca>
David Bauer [Fri, 9 Jun 2023 12:12:47 +0000 (14:12 +0200)]
scripts: use sep-char for hash nodes
U-Boot with enabled secure-boot will not boot images with the
@-character used for hash node-names.
Use the existing separation character configurable for each device.
Signed-off-by: David Bauer <mail@david-bauer.net>
Daniel Golle [Sat, 8 Jul 2023 16:31:24 +0000 (17:31 +0100)]
mediatek: replace hack for MaxLinear 2.5G PHY
Replace hack with proper patch also for Linux 5.15.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Sat, 8 Jul 2023 15:48:39 +0000 (16:48 +0100)]
mediatek: dts: mt7988a: remove boottrap hack
The PHY driver now uses regmap created from pio syscon, we no longer
need the boottrap device.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Sat, 8 Jul 2023 16:21:27 +0000 (17:21 +0100)]
mediatek: use backported Ethernet PHY driver also for 5.15
Backport in-SoC Gigabit Ethernet PHY driver instead of carrying the
driver in files-5.15.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Mathew McBride [Tue, 27 Jun 2023 06:37:28 +0000 (06:37 +0000)]
layerscape: base-files: remove redundant RAMFS_COPY_* additions
All the tools (e.g fw_setenv, ubiupdatevol) and config (fw_env.config)
needed for sysupgrade are already included in /lib/upgrade/stage2
Signed-off-by: Mathew McBride <matt@traverse.com.au>
Daniel Golle [Sat, 8 Jul 2023 15:27:25 +0000 (16:27 +0100)]
mediatek: dts: mt7988a: wire-up mediatek,pio for PHY LEDs
The PHY driver needs to read a register containing the values of the
bootstrap pins (which happen to be the PHY LEDs) to determine the LED
polarities. Allow regmap access to first pinctrl bank by adding the
'syscon' compatible, and reference the pinctrl in the MDIO bus where
the PHY driver will look for it.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Adam Bailey [Tue, 4 Jul 2023 01:16:14 +0000 (20:16 -0500)]
lua: fix integer overflow in LNUM patch
Safely detect integer overflow in try_addint() and try_subint().
Old code relied on undefined behavior, and recent versions of GCC on x86
optimized away the if-statements.
This caused integer overflow in Lua code instead of falling back to
floating-point numbers.
Signed-off-by: Adam Bailey <aebailey@gmail.com>
Christian Svensson [Fri, 7 Jul 2023 22:23:28 +0000 (00:23 +0200)]
kernel: remove CRYPTO_BLAKE2S from all >=5.15
This option was removed from upstream kernel back in 2022.
See commits:
2d16803c562ecc644803d42ba98a8e0aef9c014e (>=6.0)
3dd33a09f5dc12ccb0902923c4c784eb0f8c7554 (>=5.15.61 backport)
Signed-off-by: Christian Svensson <blue@cmd.nu>
Martin Schiller [Fri, 7 Jul 2023 11:29:45 +0000 (13:29 +0200)]
e2fsprogs: do not symlink tune2fs to findfs
commit
c0611b45a998 ("e2fsprogs: symlink e2fsck to fsck.ext{2, 3, 4},
and tune2fs to findfs") introduced a symlink from tune2fs to findfs.
This only works when the included private libblkid library is used, but
commit
5b1660a5387b ("utils/e2fsprogs: Update to 1.43.6") disabled the
usage of this private lib and enabled the shared lib support.
Removing this symlink makes it possible to install tune2fs and findfs
package.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Daniel Golle [Sat, 8 Jul 2023 13:46:18 +0000 (14:46 +0100)]
kernel: leds-ws2812b: fix build with Linux >= 5.18
The return value of the .remove function pointer has changed from
int to void with Linux 5.18. Use a precompiler macro to allow building
the leds-ws2812b module with both, Linux 5.15 and Linux 6.1.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Sat, 8 Jul 2023 11:33:17 +0000 (12:33 +0100)]
kernel: add two missing symbols in 6.1
Two more new symbols were discovered when building mediatek targets
with CONFIG_ALL_KMODS=y.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Rani Hod [Fri, 7 Jul 2023 15:26:32 +0000 (18:26 +0300)]
apm821xx: fix autoloading of kmod-hw-crypto4xx
Fixes: 55fbcad20a2d (apm821xx: make crypto4xx as a standalone module)
Signed-off-by: Rani Hod <rani.hod@gmail.com>
Nick Hainke [Sun, 2 Apr 2023 21:32:11 +0000 (23:32 +0200)]
wolfssl: update to 5.6.3
Release Notes:
- https://github.com/wolfSSL/wolfssl/releases/tag/v5.6.0-stable
- https://github.com/wolfSSL/wolfssl/releases/tag/v5.6.2-stable
- https://github.com/wolfSSL/wolfssl/releases/tag/v5.6.3-stable
Refresh patch:
- 100-disable-hardening-check.patch
Backport patch:
- 001-fix-detection-of-cut-tool-in-configure.ac.patch
Signed-off-by: Nick Hainke <vincent@systemli.org>
John Audia [Wed, 5 Jul 2023 20:12:18 +0000 (16:12 -0400)]
kernel: bump 6.1 to 6.1.38
Stable kernel git log:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/log/?h=v6.1.38
No patches needed to be rebased. Just updated checksum.
Build system: x86_64
Build-tested: x86_64/AMD Ryzen 7
Run-tested: x86_64/AMD Ryzen 7
Signed-off-by: John Audia <therealgraysky@proton.me>
[add link to stable kernel git log]
Signed-off-by: Nick Hainke <vincent@systemli.org>
John Audia [Wed, 5 Jul 2023 20:54:48 +0000 (16:54 -0400)]
kernel: bump 5.15 to 5.15.120
All patches automatically rebased.
Build system: x86_64
Build-tested: ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod
Run-tested: ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod
Signed-off-by: John Audia <therealgraysky@proton.me>
Andre Heider [Thu, 6 Jul 2023 06:16:50 +0000 (08:16 +0200)]
hostapd: update to 2023-06-22
Removed, merged upstream:
- 170-wpa_supplicant-fix-compiling-without-IEEE8021X_EAPOL.patch
Manually refreshed:
- 040-mesh-allow-processing-authentication-frames-in-block.patch
- 600-ubus_support.patch
- 761-shared_das_port.patch
Fixes: #12661
Fixes: 304423a4 ("hostapd: update to 2023-03-29")
Signed-off-by: Andre Heider <a.heider@gmail.com>
Daniel Golle [Sat, 17 Jun 2023 20:10:26 +0000 (22:10 +0200)]
mediatek: expose testing Linux 6.1 testing kernel
Set KERNEL_TESTING_PATCHVER:=6.1 to allow building all subtargets with
Linux 6.1.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Tue, 27 Jun 2023 00:25:08 +0000 (02:25 +0200)]
mediatek: adapt kernel configuration for Linux 6.1
Update kernel configuration to build Linux 6.1 for all subtargets.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Tue, 27 Jun 2023 00:22:57 +0000 (02:22 +0200)]
mediatek: copy config-5.15 to config-6.1 for all subtargets
To ease review, first copy all subtargets' kernel config-5.15 to the
to-be-adapted config-6.1.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Tue, 27 Jun 2023 00:15:55 +0000 (02:15 +0200)]
mediatek: adapt files and patches for Linux 6.1
With Linux 6.1 many of our downstream patches and out-of-tree files
can be removed or at least replaced by backported upstream commits.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
[fix CMDLINE_OVERRIDE for arm64]
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Daniel Golle [Tue, 27 Jun 2023 00:06:47 +0000 (02:06 +0200)]
mediatek: copy patches and files for Linux 6.1
First step only copies patches-5.15 and files-5.15 to
patches-6.1 and files-6.1 respectively.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Sun, 18 Jun 2023 01:22:51 +0000 (03:22 +0200)]
mediatek: prepare old rtk switch driver for use with Linux 6.1
The old RealTek RTL8367S switch driver which is used for some MT7622
devices needs to be modified to no longer free the GPIO after reset
has completed.
This is due to Linux 5.19 removing devm_gpio_free via commit
2b038e786f83 ("gpiolib: devres: Get rid of unused devm_gpio_free()")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Thu, 6 Jul 2023 18:55:17 +0000 (20:55 +0200)]
generic: 6.1: fix uImage.FIT partitions on mtdblock and ubiblock
When refreshing the hack patches for Linux 6.1 the part of the uImage.FIT
partition parser patch which takes care of allowing mtdblock and ubiblock
devices to have partitions has been dropped, supposedly by accident.
Re-add a that part to the patch, so devices using a uImage.FIT filesystem
sub-image as rootfs can work with Linux 6.1.
Fixes: 19a246bb65 ("generic: 6.1: manually refresh hack patches")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Koen Vandeputte [Wed, 7 Jun 2023 09:58:52 +0000 (11:58 +0200)]
kernel: add support for tw686x frame grabbers
Adds support for Intersil/Techwell tw686x frame grabbers.
By default, this module uses MEMCPY to transfer data.
Let's switch to "Contiguous DMA" which is the fastest
performing method available.
[ 10.074349] tw6869: PCI 0000:07:00.0, IRQ 33, MMIO 0x1200000 (contig mode)
[ 10.081381] tw686x 0000:07:00.0: enabling device (0140 -> 0142)
Signed-off-by: Koen Vandeputte <koen.vandeputte@citymesh.com>
Koen Vandeputte [Mon, 26 Jun 2023 15:23:07 +0000 (17:23 +0200)]
kernel: add support for imx pxp
This adds support for the i.MX Pixel Pipeline IP block
which is available on some imx6 flavours [1]
This allows to use hardware offloading for operations like:
- Colour conversion
- Scaling
- Rotation
[1] https://en.wikipedia.org/wiki/I.MX#i.MX_6_series
Signed-off-by: Koen Vandeputte <koen.vandeputte@citymesh.com>
Koen Vandeputte [Wed, 5 Jul 2023 11:19:28 +0000 (13:19 +0200)]
kernel: add support for imx vpu
This adds support for the Video Processing Unit IP block
which is present in certain i.MX SOC's.
The vpu used in imx6 is the coda960 which supports:
- h264 enc
- h264 dec
- jpeg enc
- jpeg dec
Please note that the required firmware needs to be added
by yourself as it's not available currently in linux-firmware upstream.
The firmware package can be found on the internet
and it will decompress itself exposing all binaries
after accepting the EULA.
The binaries should be placed at exactly these paths:
- /lib/firmware/vpu_fw_imx6d.bin
- /lib/firmware/vpu_fw_imx6q.bin
Following output will be printed at boottime if all is well:
[ 9.769638] coda
2040000.vpu: Firmware code revision: 46076
[ 9.775277] coda
2040000.vpu: Initialized CODA960.
[ 9.780082] coda
2040000.vpu: Firmware version: 3.1.1
[ 9.785312] coda
2040000.vpu: coda-jpeg-encoder registered as video0
[ 9.791859] coda
2040000.vpu: coda-jpeg-decoder registered as video1
[ 9.798375] coda
2040000.vpu: coda-video-encoder registered as video2
[ 9.805013] coda
2040000.vpu: coda-video-decoder registered as video3
gstreamer will automatically detect and use all encoders/decoders.
Please note that a FILES catch-all is required for the videobuf-dma objects
as some modules enabling this could require (and thus generating) only 1 of them.
Signed-off-by: Koen Vandeputte <koen.vandeputte@citymesh.com>
Koen Vandeputte [Wed, 8 Feb 2023 15:29:19 +0000 (16:29 +0100)]
kernel: add support for videobuf-dma
This adds support for videobuf2-dma driver.
This module contains following flavors:
- Contiguous
- Scatter/Gather
Drivers using this can enable 1 of the, or both, depending on their needs.
Due to this, a FILES catch-all is required for the videobuf-dma objects
as depending on requirements, only 1 of them could get generated.
Signed-off-by: Koen Vandeputte <koen.vandeputte@citymesh.com>
Koen Vandeputte [Wed, 8 Feb 2023 15:26:36 +0000 (16:26 +0100)]
kernel: add support for mem2mem devices
This allows addition of devices which use these kernel
modules.
This also adds a package for handling dma within video2buf.
These are only build when selected by a caller
Signed-off-by: Koen Vandeputte <koen.vandeputte@citymesh.com>
Koen Vandeputte [Thu, 8 Jun 2023 07:43:41 +0000 (09:43 +0200)]
kernel: add missing symbols in 6.1
Found these while playing with video pci media adapter support
Signed-off-by: Koen Vandeputte <koen.vandeputte@citymesh.com>
Koen Vandeputte [Tue, 6 Jun 2023 16:03:42 +0000 (18:03 +0200)]
kernel: add missing symbols in 5.15
Found these while playing with video pci media adapter support
Signed-off-by: Koen Vandeputte <koen.vandeputte@citymesh.com>
Jonas Gorski [Thu, 6 Jul 2023 19:01:06 +0000 (21:01 +0200)]
kernel-headers: install isa-rev.h on mips to fix lzma-lader on linux 6.1
Since kernel 5.17+ the mips asm.h includes isa-rev.h, which itself was
added 4.17. Without it, lzma-loader will fail to build:
make[3] -C target/linux compile
make[5]: warning: jobserver unavailable: using -j1. Add '+' to parent make rule.
In file included from head.S:22:
.../staging_dir/toolchain-mips_mips32_gcc-12.3.0_musl/include/asm/asm.h:22:10: fatal error: asm/isa-rev.h: No such file or directory
22 | #include <asm/isa-rev.h>
| ^~~~~~~~~~~~~~~
compilation terminated.
make[6]: *** [Makefile:64: head.o] Error 1
make[5]: *** [Makefile:345: compile] Error 2
make[4]: *** [Makefile:24: compile] Error 2
make[3]: *** [Makefile:11: compile] Error 2
ERROR: target/linux failed to build.
So add the file to the files to install. We can do that unconditionally,
since the oldest supported kernel 5.15 already includes it, even it if
does not need it.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
John Audia [Mon, 3 Jul 2023 09:31:33 +0000 (05:31 -0400)]
kernel: add CONFIG_LOCK_MM_AND_FIND_VMA
6.1.37 introduces a new symbol[1]
1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/diff/arch/x86/Kconfig?id=v6.1.37&id2=v6.1.36
Signed-off-by: John Audia <therealgraysky@proton.me>
John Audia [Sat, 1 Jul 2023 14:50:36 +0000 (10:50 -0400)]
kernel: bump 6.1 to 6.1.37
Manually rebased:
generic/hack-6.1/220-arm-gc_sections.patch
armsr/patches-6.1/221-armsr-disable_gc_sections_armv7.patch
All other patches automatically rebased.
Signed-off-by: John Audia <therealgraysky@proton.me>
John Audia [Wed, 28 Jun 2023 10:20:03 +0000 (06:20 -0400)]
kernel: bump 6.1 to 6.1.36
All patches automatically rebased.
Acknowledgment to @john-tho for the changes to fs.mk to accommodate new paths
introduced in https://github.com/gregkh/linux/commit/
29429a1f5871dbe54ee0da81bb12db8567f15379
Build system: x86_64
Build-tested: bcm2711/RPi4B
Run-tested: bcm2711/RPi4B
Signed-off-by: John Audia <therealgraysky@proton.me>
Tianling Shen [Tue, 23 May 2023 07:43:14 +0000 (15:43 +0800)]
kernel: modules: add xdp-sockets-diag support
Support for PF_XDP sockets monitoring interface used by the ss tool.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Andre Heider [Fri, 27 Jan 2023 15:35:46 +0000 (16:35 +0100)]
build: add support to use the mold linker for packages
If CONFIG_USE_MOLD is set, all target packages will use the mold linker.
Except the ones which opted-out via setting PKG_BUILD_FLAGS:=no-mold.
Signed-off-by: Andre Heider <a.heider@gmail.com>
Andre Heider [Fri, 27 Jan 2023 17:22:43 +0000 (18:22 +0100)]
treewide: opt-out of tree-wide mold usage
These use linker scripts, which mold doesn't support.
Signed-off-by: Andre Heider <a.heider@gmail.com>
Andre Heider [Fri, 27 Jan 2023 16:53:02 +0000 (17:53 +0100)]
toolchain: add mold as additional linker
Install it as $tripple-ld.mold in order to use -fuse-ld=mold.
Signed-off-by: Andre Heider <a.heider@gmail.com>
Andre Heider [Fri, 27 Jan 2023 16:53:02 +0000 (17:53 +0100)]
tools: add mold, a modern linker
mold is a faster drop-in replacement for existing Unix linkers.
A single binary is able to link various targets, which is why this lives
in tools/.
All toolchain builds then just need to copy the linker over, hence avoiding
multiple builds with the same outcome.
Signed-off-by: Andre Heider <a.heider@gmail.com>
Andre Heider [Fri, 27 Jan 2023 16:13:15 +0000 (17:13 +0100)]
config: add a knob to use the mold linker for packages
Building it requires gcc >= 10.2 or clang >= 12.
Using sstrip with its -z argument can produce non-working binaries, like
a segfaulting `getrandom`, so don't allow that combination.
Signed-off-by: Andre Heider <a.heider@gmail.com>
Andre Heider [Sat, 28 Jan 2023 20:16:16 +0000 (21:16 +0100)]
build: replace SSTRIP_ARGS with SSTRIP_DISCARD_TRAILING_ZEROES
sstrip only has one functional arg. Make that a bool option, which can
easily depend on other knobs then.
This is required to be disabled for the mold linker.
Signed-off-by: Andre Heider <a.heider@gmail.com>
Andre Heider [Fri, 27 Jan 2023 15:33:25 +0000 (16:33 +0100)]
meson: prepare to use different linkers
This sets the default linker for cross compilation.
No functional change intended.
Signed-off-by: Andre Heider <a.heider@gmail.com>
Andre Heider [Fri, 27 Jan 2023 15:32:31 +0000 (16:32 +0100)]
rules: prepare to use different linkers
This explicitely adds the default linker to the target LDFLAGS.
No functional change intended.
Signed-off-by: Andre Heider <a.heider@gmail.com>
David Bauer [Tue, 4 Jul 2023 23:35:02 +0000 (01:35 +0200)]
mac80211: partly revert force-mac80211 loss detection
This patch will only force mac80211 loss detection upon ath10k by
masking the driver-specific loss-detection bit.
Ref: commit
ed816f6ba8b5 ("mac80211: always use mac80211 loss detection")
Signed-off-by: David Bauer <mail@david-bauer.net>
Christian Svensson [Sun, 2 Jul 2023 22:03:18 +0000 (00:03 +0200)]
kernel: add kmod-i2c-mux-reg support
Add package for register-based I2C bus mux/switching devices.
Signed-off-by: Christian Svensson <blue@cmd.nu>
Christian Svensson [Sun, 2 Jul 2023 22:02:14 +0000 (00:02 +0200)]
kernel: add kmod-hwmon-jc42 support
Add package for Jedec JC42.4 compliant temperature sensor.
Signed-off-by: Christian Svensson <blue@cmd.nu>
Christian Svensson [Sun, 2 Jul 2023 22:00:07 +0000 (00:00 +0200)]
kernel: add kmod-hwmon-max6697 support
Add package for Maxim MAX6697 I2C based temperature sensor.
Signed-off-by: Christian Svensson <blue@cmd.nu>
Christian Lamparter [Tue, 4 Jul 2023 18:42:22 +0000 (20:42 +0200)]
ipq-wifi: fix upstream board-2.bin ZTE M289F snafu
The upstream board-2.bin file in the linux-firmware.git
repository for the QCA4019 contains a packed board-2.bin
for this device for both 2.4G and 5G wifis. This isn't
something that the ath10k driver supports.
Until this feature either gets implemented - which is
very unlikely -, or the upstream boardfile is mended
(both, the original submitter and ath10k-firmware
custodian have been notified). OpenWrt will go back
and use its own bespoke boardfile. This unfortunately
means that 2.4G and on some revisions the 5G WiFi is
not available in the initramfs image for this device.
Fixes: #12886
Reported-by: Christian Heuff <christian@heuff.at>
Debugged-by: Georgios Kourachanis <geo.kourachanis@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
John Audia [Mon, 3 Jul 2023 10:54:17 +0000 (06:54 -0400)]
x86/64: set CONFIG_NVME_HWMON=y
CONFIG_NVME_HWMON exposes /sys/class/nvme/nvme0/device/hwmon
to allow sensors (and others) to see NVMe drive health
Signed-off-by: John Audia <therealgraysky@proton.me>
John Thomson [Sat, 1 Jul 2023 00:23:35 +0000 (10:23 +1000)]
kernel: fix KernelPackage when all KCONFIG are versioned
If a kernel package was defined where all KCONFIG symbols were dynamic,
and versioned, no FILES would be installed, as the foreach evaluation was
providing the value of the variable defined by the KCONFIG symbol name
including the version test
Fix this by calling the version_filter function on the list of KCONFIG
variable names run through by foreach
Example, kernel 6.1:
KCONFIG:=CONFIG_OLD@lt6.1 CONFIG_NEW@ge6.1
filter-out any KCONFIG settings forced by package:
CONFIG_OLD@lt6.1 CONFIG_NEW@ge6.1
there are dynamic settings, so for each of them,
get the value of the make variable defined by symbol name:
CONFIG_OLD@lt6.1 is not set
CONFIG_NEW@ge6.1 is not set
versus
CONFIG_OLD is not set
CONFIG_NEW=m
test if any of these are m, or y
if yes, install files, otherwise, nothing to install
Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
Petr Štetiar [Wed, 24 May 2023 07:46:45 +0000 (09:46 +0200)]
kernel: introduce KERNEL_WERROR config option
In commit
b2d1eb717b65 ("generic: 5.15: enable Werror by default for
kernel compile") CONFIG_WERROR=y was enabled and all warnings/errors
reported with GCC 12 were fixed.
Keeping this in sync with past/future GCC versions is going to be uphill
battle, so lets introduce new KERNEL_WERROR config option, enable it by
default only for tested/known working combinations and on buildbots.
References: #12687
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Felix Fietkau [Tue, 4 Jul 2023 04:16:44 +0000 (06:16 +0200)]
mt76: update to the latest version
f704e4f83c6f mt76: mt7915: fix copy&paste issue on capability check rework
Signed-off-by: Felix Fietkau <nbd@nbd.name>
John Audia [Mon, 3 Jul 2023 09:25:56 +0000 (05:25 -0400)]
x86: set CONFIG_X86_AMD_PLATFORM_DEVICE
Needed by AMD processors using Carrizo and later chipsets
Signed-off-by: John Audia <therealgraysky@proton.me>
Felix Fietkau [Mon, 3 Jul 2023 09:53:23 +0000 (11:53 +0200)]
netifd: update to the latest version
e94f7a81a039 bridge: fix config reload on 32 bit systems
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Sander Vanheule [Sat, 24 Jun 2023 20:18:35 +0000 (22:18 +0200)]
ramips: mt7621: add TP-Link EAP613 v1
The TP-Link EAP613 v1 is a ceiling-mount 802.11ax access point. It can
be powered via PoE or a DC barrel connector (12V). Connecting to the
UART requires fine soldering and careful manipulation of any soldered
wires.
Device details:
* SoC: MT7621AT
* Flash: 16 MiB SPI NOR
* RAM: 256 MiB DDR3L
* Wi-Fi:
* MT7905DA + MT7975D: 2.4 GHz + 5 GHz (DBDC), 2x2:2
* Two stamped metal antennas (ANT1, ANT2)
* One PCB antenna (ANT3)
* One unpopulated antenna (ANT4)
* Ethernet:
* 1× 10/100/1000 Mbps port with PoE
* LEDs:
* Array of four blue LEDs with one control line
* Buttons:
* Reset
* Board test points:
* UART: next to CPU RF-shield and power circuits
* JTAG: under CPU RF-shield (untested)
* Watchdog: 3PEAK TPV706 (not implemented)
Althought three antennas are populated, the MT7905DA does not support
the additional Rx chain for background DFS detection (or Bluetooth)
according to commit
6cbcc34f50a3 ("ramips: disable unsupported
background radar detection").
MAC addresses:
* LAN: 48:22:54:xx:xx:a2 (device label)
* WLAN 2.4 GHz: 48:22:54:xx:xx:a2
* WLAN 5 GHz: 48:22:54:xx:xx:a3
The radio calibration blob stored in flash also contains valid MAC
addresses for both radio bands (OUI 00:0c:43).
Factory install:
1. Enable SSH on the device via web interface
2. Log in with SSH, and run `cliclientd stopcs`
3. Upload -factory.bin image via web interface. It may be necessary to
shorten the filename of the image to e.g. 'factory.bin'.
Recovery:
1. Open the device by unscrewing four screws from the backside
2. Carefully remove board from the housing
3. Connect to UART (3.3V):
* Find test points labelled "VCC", "GND", "UART_TX", "UART_RX"
* Solder wires to test points or connect otherwise. Be careful not
to damage the PCB e.g. by pulling on soldered wires.
* Open console with 115200n8 settings
4. Interrupt bootloader and use tftpboot to start an initramfs:
setenv ipaddr $DEVICE_IP
setenv serverip $SERVER_IP
tftpboot
84000000 openwrt-initramfs-kernel.bin
bootm
DO NOT use saveenv to store modified u-boot environment variables. The
environment is saved at flash offset 0x30000, which erases part of the
(secondary) bootloader.
The device uses two bootloader stages. The first stage will load the
second stage from a uImage stored at flash offset 0x10000. In case of
a damaged second stage, the first stage should allow uploading a new
image via y-modem (untested).
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Sander Vanheule [Thu, 29 Jun 2023 14:13:33 +0000 (16:13 +0200)]
firmware-utils: bump to git HEAD
Add support for a number of new TP-Link devices.
9e2de8515be1 tplink-safeloader: add EAP610 v3 and EAP613 v1
bb12cf5c3fa9 tplink-safeloader: Add support for TP-Link Deco M5
a2d49fb1e188 tplink-safeloader: add RU support-list entry for Archer C6U v1
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Felix Fietkau [Sat, 1 Jul 2023 20:09:07 +0000 (22:09 +0200)]
mt76: fix download hash
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Wenli Looi [Sat, 1 Jul 2023 23:01:50 +0000 (23:01 +0000)]
ath79: fix broken 02_network script
Script was broken by an extraneous space.
Signed-off-by: Wenli Looi <wlooi@ucalgary.ca>
David Bauer [Fri, 30 Jun 2023 17:30:09 +0000 (19:30 +0200)]
mediatek: define NMBM management region for WAX220
The NETGEAR WAX220 employs NMBM on SPI-NAND. In order to avoid dealing
with invalid factory data, enable NMBM in the area preceding the UBI
volume.
Signed-off-by: David Bauer <mail@david-bauer.net>
Felix Fietkau [Sat, 1 Jul 2023 20:09:07 +0000 (22:09 +0200)]
mt76: update to the latest version
c50be0b54cdd wifi: mt76: mt7915: fix capabilities in non-AP mode
d7d7479b00e9 wifi: mt7915: fix beaconing in mesh mode
1377f586c6f5 wifi: mt7915: move capability check to start_ap
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Pascal Ernster [Sun, 4 Jun 2023 20:16:20 +0000 (22:16 +0200)]
realtek: Use MDIO_* constants from <linux/mdio.h>
To improve code readability in drivers/net/phy/rtl83xx-phy.c, replace
constants MMD_AN and MMD_VEND2 from drivers/net/phy/rtl83xx-phy.h with
MDIO_MMD_AN and MDIO_MMD_VEND2 from <linux/mdio.h>.
Also, replace
BIT(0) with MDIO_EEE_2_5GT,
BIT(1) with MDIO_EEE_100TX,
BIT(2) with MDIO_EEE_1000T,
BIT(9) with MDIO_AN_CTRL1_RESTART,
BIT(12) with MDIO_AN_CTRL1_ENABLE,
32 with MDIO_AN_10GBT_CTRL,
60 with MDIO_AN_EEE_ADV, and
62 with MDIO_AN_EEE_ADV2
from <linux/mdio.h>.
Suggested-by: DENG Qingfang <dqfext@gmail.com>
Signed-off-by: Pascal Ernster <git@hardfalcon.net>
projects / openwrt / staging / thess.git / log