He Zhe [Wed, 26 Feb 2020 14:30:04 +0000 (22:30 +0800)]
perf probe: Check return value of strlist__add() for -ENOMEM
strlist__add() may fail with -ENOMEM. Check it and give debugging hint
in advance.
Signed-off-by: He Zhe <zhe.he@windriver.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lore.kernel.org/lkml/1582727404-180095-1-git-send-email-zhe.he@windriver.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ravi Bangoria [Thu, 13 Feb 2020 06:43:06 +0000 (12:13 +0530)]
perf config: Document missing config options
While documenting annotate.show_nr_samples config option, I found many
other config options missing in perf-config documentation. Add them.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yisheng Xie <xieyisheng1@huawei.com>
Link: http://lore.kernel.org/lkml/20200213064306.160480-9-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ravi Bangoria [Thu, 13 Feb 2020 06:43:05 +0000 (12:13 +0530)]
perf annotate: Fix perf config option description
perf config annotate options says it works only with TUI, which is wrong.
Most of the TUI options are applicable to stdio2 as well. So remove that
generic line and add individual line with each option stating which
browsers supports that option. Also, annotate.show_nr_samples config is
missing in Documentation. Describe it.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yisheng Xie <xieyisheng1@huawei.com>
Link: http://lore.kernel.org/lkml/20200213064306.160480-8-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ravi Bangoria [Thu, 13 Feb 2020 06:43:04 +0000 (12:13 +0530)]
perf annotate: Prefer cmdline option over default config
For all the perf-config options that can also be set from command line
option, the preference is given to command line version in case of any
conflict. But that's opposite in case of perf annotate. i.e. the more
preference is given to default option rather than command line option.
Fix it.
Before:
$ ./perf config
annotate.show_nr_samples=false
$ ./perf annotate shash --show-nr-samples
Percent│
│24: mov -0xc(%rbp),%eax
49.19 │ imul $0x1003f,%eax,%ecx
│ mov -0x18(%rbp),%rax
After:
Samples│
│24: mov -0xc(%rbp),%eax
1 │ imul $0x1003f,%eax,%ecx
│ mov -0x18(%rbp),%rax
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yisheng Xie <xieyisheng1@huawei.com>
Link: http://lore.kernel.org/lkml/20200213064306.160480-7-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ravi Bangoria [Thu, 13 Feb 2020 06:43:03 +0000 (12:13 +0530)]
perf annotate: Make perf config effective
perf default config set by user in [annotate] section is totally ignored
by annotate code. Fix it.
Before:
$ ./perf config
annotate.hide_src_code=true
annotate.show_nr_jumps=true
annotate.show_nr_samples=true
$ ./perf annotate shash
│ unsigned h = 0;
│ movl $0x0,-0xc(%rbp)
│ while (*s)
│ ↓ jmp 44
│ h = 65599 * h + *s++;
11.33 │24: mov -0xc(%rbp),%eax
43.50 │ imul $0x1003f,%eax,%ecx
│ mov -0x18(%rbp),%rax
After:
│ movl $0x0,-0xc(%rbp)
│ ↓ jmp 44
1 │1 24: mov -0xc(%rbp),%eax
4 │ imul $0x1003f,%eax,%ecx
│ mov -0x18(%rbp),%rax
Note that we have removed show_nr_samples and show_total_period from
annotation_options because they are not used. Instead of them we use
symbol_conf.show_nr_samples and symbol_conf.show_total_period.
Committer testing:
Using 'perf annotate --stdio2' to use the TUI rendering but emitting the output to stdio:
# perf config
#
# perf config annotate.hide_src_code=true
# perf config
annotate.hide_src_code=true
#
# perf config annotate.show_nr_jumps=true
# perf config annotate.show_nr_samples=true
# perf config
annotate.hide_src_code=true
annotate.show_nr_jumps=true
annotate.show_nr_samples=true
#
#
Before:
# perf annotate --stdio2 ObjectInstance::weak_pointer_was_finalized
Samples: 1 of event 'cycles', 4000 Hz, Event count (approx.): 830873, [percent: local period]
ObjectInstance::weak_pointer_was_finalized() /usr/lib64/libgjs.so.0.0.0
Percent
00000000000609f0 <ObjectInstance::weak_pointer_was_finalized()@@Base>:
endbr64
cmpq $0x0,0x20(%rdi)
↓ je 10
xor %eax,%eax
← retq
xchg %ax,%ax
100.00 10: push %rbp
cmpq $0x0,0x18(%rdi)
mov %rdi,%rbp
↓ jne 20
1b: xor %eax,%eax
pop %rbp
← retq
nop
20: lea 0x18(%rdi),%rdi
→ callq JS_UpdateWeakPointerAfterGC(JS::Heap<JSObject*
cmpq $0x0,0x18(%rbp)
↑ jne 1b
mov %rbp,%rdi
→ callq ObjectBase::jsobj_addr() const@plt
mov $0x1,%eax
pop %rbp
← retq
#
After:
# perf annotate --stdio2 ObjectInstance::weak_pointer_was_finalized 2> /dev/null
Samples: 1 of event 'cycles', 4000 Hz, Event count (approx.): 830873, [percent: local period]
ObjectInstance::weak_pointer_was_finalized() /usr/lib64/libgjs.so.0.0.0
Samples endbr64
cmpq $0x0,0x20(%rdi)
↓ je 10
xor %eax,%eax
← retq
xchg %ax,%ax
1 1 10: push %rbp
cmpq $0x0,0x18(%rdi)
mov %rdi,%rbp
↓ jne 20
1 1b: xor %eax,%eax
pop %rbp
← retq
nop
1 20: lea 0x18(%rdi),%rdi
→ callq JS_UpdateWeakPointerAfterGC(JS::Heap<JSObject*
cmpq $0x0,0x18(%rbp)
↑ jne 1b
mov %rbp,%rdi
→ callq ObjectBase::jsobj_addr() const@plt
mov $0x1,%eax
pop %rbp
← retq
#
# perf config annotate.show_nr_jumps
annotate.show_nr_jumps=true
# perf config annotate.show_nr_jumps=false
# perf config annotate.show_nr_jumps
annotate.show_nr_jumps=false
#
# perf annotate --stdio2 ObjectInstance::weak_pointer_was_finalized 2> /dev/null
Samples: 1 of event 'cycles', 4000 Hz, Event count (approx.): 830873, [percent: local period]
ObjectInstance::weak_pointer_was_finalized() /usr/lib64/libgjs.so.0.0.0
Samples endbr64
cmpq $0x0,0x20(%rdi)
↓ je 10
xor %eax,%eax
← retq
xchg %ax,%ax
1 10: push %rbp
cmpq $0x0,0x18(%rdi)
mov %rdi,%rbp
↓ jne 20
1b: xor %eax,%eax
pop %rbp
← retq
nop
20: lea 0x18(%rdi),%rdi
→ callq JS_UpdateWeakPointerAfterGC(JS::Heap<JSObject*
cmpq $0x0,0x18(%rbp)
↑ jne 1b
mov %rbp,%rdi
→ callq ObjectBase::jsobj_addr() const@plt
mov $0x1,%eax
pop %rbp
← retq
#
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yisheng Xie <xieyisheng1@huawei.com>
Link: http://lore.kernel.org/lkml/20200213064306.160480-6-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ravi Bangoria [Thu, 13 Feb 2020 06:43:02 +0000 (12:13 +0530)]
perf config: Introduce perf_config_u8()
Introduce perf_config_u8() utility function to convert char * input into
u8 destination. We will utilize it in followup patch.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yisheng Xie <xieyisheng1@huawei.com>
Link: http://lore.kernel.org/lkml/20200213064306.160480-5-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ravi Bangoria [Thu, 13 Feb 2020 06:43:01 +0000 (12:13 +0530)]
perf annotate: Fix --show-nr-samples for tui/stdio2
perf annotate --show-nr-samples does not really show number of samples.
The reason is we have two separate variables for the same purpose.
One is in symbol_conf.show_nr_samples and another is
annotation_options.show_nr_samples.
We save command line option in symbol_conf.show_nr_samples but uses
annotation_option.show_nr_samples while rendering tui/stdio2 browser.
Though, we copy symbol_conf.show_nr_samples to
annotation__default_options.show_nr_samples but that is not really
effective as we don't use annotation__default_options once we copy
default options to dynamic variable annotate.opts in cmd_annotate().
Instead of all these complication, keep only one variable and use it all
over. symbol_conf.show_nr_samples is used by perf report/top as well. So
let's kill annotation_options.show_nr_samples.
On a side note, I've kept annotation_options.show_nr_samples definition
because it's still used by perf-config code. Follow up patch to fix
perf-config for annotate will remove annotation_options.show_nr_samples.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yisheng Xie <xieyisheng1@huawei.com>
Link: http://lore.kernel.org/lkml/20200213064306.160480-4-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ravi Bangoria [Thu, 13 Feb 2020 06:43:00 +0000 (12:13 +0530)]
perf annotate: Fix --show-total-period for tui/stdio2
perf annotate --show-total-period does not really show total period.
The reason is we have two separate variables for the same purpose.
One is in symbol_conf.show_total_period and another is
annotation_options.show_total_period.
We save command line option in symbol_conf.show_total_period but uses
annotation_option.show_total_period while rendering tui/stdio2 browser.
Though, we copy symbol_conf.show_total_period to
annotation__default_options.show_total_period but that is not really
effective as we don't use annotation__default_options once we copy
default options to dynamic variable annotate.opts in cmd_annotate().
Instead of all these complication, keep only one variable and use it all
over. symbol_conf.show_total_period is used by perf report/top as well.
So let's kill annotation_options.show_total_period.
On a side note, I've kept annotation_options.show_total_period
definition because it's still used by perf-config code. Follow up patch
to fix perf-config for annotate will remove
annotation_options.show_total_period.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yisheng Xie <xieyisheng1@huawei.com>
Link: http://lore.kernel.org/lkml/20200213064306.160480-3-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ravi Bangoria [Thu, 13 Feb 2020 06:42:59 +0000 (12:12 +0530)]
perf annotate/tui: Re-render title bar after switching back from script browser
The 'perf annotate' TUI browser provides a 'r' hot key to switch to a
script browser. But the annotate browser title bar becomes hidden while
switching back from script browser. Fix it.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yisheng Xie <xieyisheng1@huawei.com>
Link: http://lore.kernel.org/lkml/20200213064306.160480-2-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 27 Feb 2020 12:51:30 +0000 (09:51 -0300)]
tools headers UAPI: Update tools's copy of kvm.h headers
Picking the changes from:
5ef8acbdd687 ("KVM: nVMX: Emulate MTF when performing instruction emulation")
Silencing this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/kvm.h' differs from latest version at 'arch/x86/include/uapi/asm/kvm.h'
diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h
No change in tooling ensues, just the x86 kvm tooling gets rebuilt as
those headers are included in its build:
$ cp arch/x86/include/uapi/asm/kvm.h tools/arch/x86/include/uapi/asm/kvm.h
$ make -C tools/perf
make: Entering directory '/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j12' parallel build
Auto-detecting system features:
... dwarf: [ on ]
<SNIP>
... disassembler-four-args: [ on ]
DESCEND plugins
CC /tmp/build/perf/arch/x86/util/kvm-stat.o
<SNIP>
LD /tmp/build/perf/arch/x86/util/perf-in.o
LD /tmp/build/perf/arch/x86/perf-in.o
LD /tmp/build/perf/arch/perf-in.o
LD /tmp/build/perf/perf-in.o
LINK /tmp/build/perf/perf
<SNIP>
$
As it doesn't seem to be used there:
$ grep STATE tools/perf/arch/x86/util/kvm-stat.c
$
And the 'perf trace' beautifier table generator isn't interested in
these things:
$ grep regex= tools/perf/trace/beauty/kvm_ioctl.sh
regex='^#[[:space:]]*define[[:space:]]+KVM_(\w+)[[:space:]]+_IO[RW]*\([[:space:]]*KVMIO[[:space:]]*,[[:space:]]*(0x[[:xdigit:]]+).*'
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oliver Upton <oupton@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 27 Feb 2020 12:23:35 +0000 (09:23 -0300)]
tools arch x86: Sync the msr-index.h copy with the kernel sources
To pick up the changes from these csets:
21b5ee59ef18 ("x86/cpu/amd: Enable the fixed Instructions Retired counter IRPERF")
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before
$ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h
$ git diff
diff --git a/tools/arch/x86/include/asm/msr-index.h b/tools/arch/x86/include/asm/msr-index.h
index
ebe1685e92dd..
d5e517d1c3dd 100644
--- a/tools/arch/x86/include/asm/msr-index.h
+++ b/tools/arch/x86/include/asm/msr-index.h
@@ -512,6 +512,8 @@
#define MSR_K7_HWCR 0xc0010015
#define MSR_K7_HWCR_SMMLOCK_BIT 0
#define MSR_K7_HWCR_SMMLOCK BIT_ULL(MSR_K7_HWCR_SMMLOCK_BIT)
+#define MSR_K7_HWCR_IRPERF_EN_BIT 30
+#define MSR_K7_HWCR_IRPERF_EN BIT_ULL(MSR_K7_HWCR_IRPERF_EN_BIT)
#define MSR_K7_FID_VID_CTL 0xc0010041
#define MSR_K7_FID_VID_STATUS 0xc0010042
$
That don't result in any change in tooling:
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after
$ diff -u before after
$
To silence this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h'
diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo Molnar [Wed, 26 Feb 2020 14:18:05 +0000 (15:18 +0100)]
Merge tag 'perf-urgent-for-mingo-5.6-
20200220' of git://git./linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
auxtrace:
Adrian Hunter:
- Fix endless record after being terminated on arm-spe.
Wei Li:
- Fix endless record after being terminated on Intel PT and BTS and
on ARM's cs-etm.
perf test:
Thomas Richter
- Fix test trace+probe_vfs_getname.sh on s390
PowerPC:
Arnaldo Carvalho de Melo:
- Sync powerpc syscall.tbl with the kernel sources.
BPF:
Arnaldo Carvalho de Melo:
- Remove extraneous bpf/ subdir from bpf.h headers used to build bpf events.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Linus Torvalds [Tue, 25 Feb 2020 18:14:39 +0000 (10:14 -0800)]
Merge tag 'riscv-for-linux-5.6-rc4' of git://git./linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
"This contains a handful of RISC-V related fixes that I've collected
and would like to target for 5.6-rc4:
- A fix to set up the PMPs on boot, which allows the kernel to access
memory on systems that don't set up permissive PMPs before getting
to Linux. This only effects machine-mode kernels, which currently
means only NOMMU kernels.
- A fix to avoid enabling supervisor-mode interrupts when running in
machine-mode, also only for NOMMU kernels.
- A pair of fixes to our KASAN support to avoid corrupting memory.
- A gitignore fix.
This boots on QEMU's virt board for me"
* tag 'riscv-for-linux-5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: adjust the indent
riscv: allocate a complete page size for each page table
riscv: Fix gitignore
RISC-V: Don't enable all interrupts in trap_init()
riscv: set pmp configuration if kernel is running in M-mode
Linus Torvalds [Tue, 25 Feb 2020 18:09:41 +0000 (10:09 -0800)]
Merge branch 'mips-fixes' of git://git./linux/kernel/git/mips/linux
Pull MIPS fixes from Paul Burton:
"Here are a few MIPS fixes, and a MAINTAINERS update to hand over MIPS
maintenance to Thomas Bogendoerfer - this will be my final pull
request as MIPS maintainer.
Thanks for your helpful comments, useful corrections & responsiveness
during the time I've fulfilled the role, and I'm sure I'll pop up
elsewhere in the tree somewhere down the line"
* 'mips-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MAINTAINERS: Hand MIPS over to Thomas
MIPS: ingenic: DTS: Fix watchdog nodes
MIPS: X1000: Fix clock of watchdog node.
MIPS: vdso: Wrap -mexplicit-relocs in cc-option
MIPS: VPE: Fix a double free and a memory leak in 'release_vpe()'
MIPS: cavium_octeon: Fix syncw generation.
mips: vdso: add build time check that no 'jalr t9' calls left
MIPS: Disable VDSO time functionality on microMIPS
mips: vdso: fix 'jalr t9' crash in vdso code
Paul Burton [Sat, 22 Feb 2020 17:04:17 +0000 (09:04 -0800)]
MAINTAINERS: Hand MIPS over to Thomas
My time with MIPS the company has reached its end, and so at best I'll
have little time spend on maintaining arch/mips/.
Ralf last authored a patch over 2 years ago, the last time he committed
one is even further back & activity was sporadic for a while before
that. The reality is that he isn't active.
Having a new maintainer with time to do things properly will be
beneficial all round. Thomas Bogendoerfer has been involved in MIPS
development for a long time & has offered to step up as maintainer, so
add Thomas and remove myself & Ralf from the MIPS entry.
Ralf already has an entry in CREDITS to honor his contributions, so this
just adds one for me.
Signed-off-by: Paul Burton <paulburton@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@vger.kernel.org
Zong Li [Fri, 7 Feb 2020 09:52:45 +0000 (17:52 +0800)]
riscv: adjust the indent
Adjust the indent to match Linux coding style.
Signed-off-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Zong Li [Fri, 7 Feb 2020 09:52:44 +0000 (17:52 +0800)]
riscv: allocate a complete page size for each page table
Each page table should be created by allocating a complete page size
for it. Otherwise, the content of the page table would be corrupted
somewhere through memory allocation which allocates the memory at the
middle of the page table for other use.
Signed-off-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Linus Torvalds [Mon, 24 Feb 2020 19:48:17 +0000 (11:48 -0800)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Bugfixes, including the fix for CVE-2020-2732 and a few issues found
by 'make W=1'"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: s390: rstify new ioctls in api.rst
KVM: nVMX: Check IO instruction VM-exit conditions
KVM: nVMX: Refactor IO bitmap checks into helper function
KVM: nVMX: Don't emulate instructions in guest mode
KVM: nVMX: Emulate MTF when performing instruction emulation
KVM: fix error handling in svm_hardware_setup
KVM: SVM: Fix potential memory leak in svm_cpu_init()
KVM: apic: avoid calculating pending eoi from an uninitialized val
KVM: nVMX: clear PIN_BASED_POSTED_INTR from nested pinbased_ctls only when apicv is globally disabled
KVM: nVMX: handle nested posted interrupts when apicv is disabled for L1
kvm: x86: svm: Fix NULL pointer dereference when AVIC not enabled
KVM: VMX: Add VMX_FEATURE_USR_WAIT_PAUSE
KVM: nVMX: Hold KVM's srcu lock when syncing vmcs12->shadow
KVM: x86: don't notify userspace IOAPIC on edge-triggered interrupt EOI
kvm/emulate: fix a -Werror=cast-function-type
KVM: x86: fix incorrect comparison in trace event
KVM: nVMX: Fix some obsolete comments and grammar error
KVM: x86: fix missing prototypes
KVM: x86: enable -Werror
Linus Torvalds [Mon, 24 Feb 2020 19:40:23 +0000 (11:40 -0800)]
Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes a Kconfig-related build error and an integer overflow in
chacha20poly1305"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: chacha20poly1305 - prevent integer overflow on large input
tee: amdtee: amdtee depends on CRYPTO_DEV_CCP_DD
Linus Torvalds [Mon, 24 Feb 2020 19:32:15 +0000 (11:32 -0800)]
Merge branch 'fixes' of git://git./linux/kernel/git/viro/vfs
Pull tmpfs fix from Al Viro:
"Regression from fs_parse series this cycle..."
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
tmpfs: deny and force are not huge mount options
Linus Torvalds [Fri, 21 Feb 2020 20:43:35 +0000 (12:43 -0800)]
floppy: check FDC index for errors before assigning it
Jordy Zomer reported a KASAN out-of-bounds read in the floppy driver in
wait_til_ready().
Which on the face of it can't happen, since as Willy Tarreau points out,
the function does no particular memory access. Except through the FDCS
macro, which just indexes a static allocation through teh current fdc,
which is always checked against N_FDC.
Except the checking happens after we've already assigned the value.
The floppy driver is a disgrace (a lot of it going back to my original
horrd "design"), and has no real maintainer. Nobody has the hardware,
and nobody really cares. But it still gets used in virtual environment
because it's one of those things that everybody supports.
The whole thing should be re-written, or at least parts of it should be
seriously cleaned up. The 'current fdc' index, which is used by the
FDCS macro, and which is often shadowed by a local 'fdc' variable, is a
prime example of how not to write code.
But because nobody has the hardware or the motivation, let's just fix up
the immediate problem with a nasty band-aid: test the fdc index before
actually assigning it to the static 'fdc' variable.
Reported-by: Jordy Zomer <jordy@simplyhacker.com>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Christian Borntraeger [Mon, 24 Feb 2020 10:15:59 +0000 (11:15 +0100)]
KVM: s390: rstify new ioctls in api.rst
We also need to rstify the new ioctls that we added in parallel to the
rstification of the kvm docs.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linus Torvalds [Mon, 24 Feb 2020 00:17:42 +0000 (16:17 -0800)]
Linux 5.6-rc3
Linus Torvalds [Sun, 23 Feb 2020 17:43:50 +0000 (09:43 -0800)]
Merge tag 'for-5.6-rc2-tag' of git://git./linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"These are fixes that were found during testing with help of error
injection, plus some other stable material.
There's a fixup to patch added to rc1 causing locking in wrong context
warnings, tests found one more deadlock scenario. The patches are
tagged for stable, two of them now in the queue but we'd like all
three released at the same time.
I'm not happy about fixes to fixes in such a fast succession during
rcs, but I hope we found all the fallouts of commit
28553fa992cb
('Btrfs: fix race between shrinking truncate and fiemap')"
* tag 'for-5.6-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Btrfs: fix deadlock during fast fsync when logging prealloc extents beyond eof
Btrfs: fix btrfs_wait_ordered_range() so that it waits for all ordered extents
btrfs: fix bytes_may_use underflow in prealloc error condtition
btrfs: handle logged extent failure properly
btrfs: do not check delayed items are empty for single transaction cleanup
btrfs: reset fs_root to NULL on error in open_ctree
btrfs: destroy qgroup extent records on transaction abort
Linus Torvalds [Sun, 23 Feb 2020 17:42:19 +0000 (09:42 -0800)]
Merge tag 'ext4_for_linus_stable' of git://git./linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"More miscellaneous ext4 bug fixes (all stable fodder)"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix mount failure with quota configured as module
jbd2: fix ocfs2 corrupt when clearing block group bits
ext4: fix race between writepages and enabling EXT4_EXTENTS_FL
ext4: rename s_journal_flag_rwsem to s_writepages_rwsem
ext4: fix potential race between s_flex_groups online resizing and access
ext4: fix potential race between s_group_info online resizing and access
ext4: fix potential race between online resizing and write operations
ext4: add cond_resched() to __ext4_find_entry()
ext4: fix a data race in EXT4_I(inode)->i_disksize
Linus Torvalds [Sun, 23 Feb 2020 17:37:41 +0000 (09:37 -0800)]
Merge tag 'csky-for-linus-5.6-rc3' of git://github.com/c-sky/csky-linux
Pull csky updates from Guo Ren:
"Sorry, I missed 5.6-rc1 merge window, but in this pull request the
most are the fixes and the rests are between fixes and features. The
only outside modification is the MAINTAINERS file update with our
mailing list.
- cache flush implementation fixes
- ftrace modify panic fix
- CONFIG_SMP boot problem fix
- fix pt_regs saving for atomic.S
- fix fixaddr_init without highmem.
- fix stack protector support
- fix fake Tightly-Coupled Memory code compile and use
- fix some typos and coding convention"
* tag 'csky-for-linus-5.6-rc3' of git://github.com/c-sky/csky-linux: (23 commits)
csky: Replace <linux/clk-provider.h> by <linux/of_clk.h>
csky: Implement copy_thread_tls
csky: Add PCI support
csky: Minimize defconfig to support buildroot config.fragment
csky: Add setup_initrd check code
csky: Cleanup old Kconfig options
arch/csky: fix some Kconfig typos
csky: Fixup compile warning for three unimplemented syscalls
csky: Remove unused cache implementation
csky: Fixup ftrace modify panic
csky: Add flush_icache_mm to defer flush icache all
csky: Optimize abiv2 copy_to_user_page with VM_EXEC
csky: Enable defer flush_dcache_page for abiv2 cpus (807/810/860)
csky: Remove unnecessary flush_icache_* implementation
csky: Support icache flush without specific instructions
csky/Kconfig: Add Kconfig.platforms to support some drivers
csky/smp: Fixup boot failed when CONFIG_SMP
csky: Set regs->usp to kernel sp, when the exception is from kernel
csky/mm: Fixup export invalid_pte_table symbol
csky: Separate fixaddr_init from highmem
...
Oliver Upton [Tue, 4 Feb 2020 23:26:31 +0000 (15:26 -0800)]
KVM: nVMX: Check IO instruction VM-exit conditions
Consult the 'unconditional IO exiting' and 'use IO bitmaps' VM-execution
controls when checking instruction interception. If the 'use IO bitmaps'
VM-execution control is 1, check the instruction access against the IO
bitmaps to determine if the instruction causes a VM-exit.
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Oliver Upton [Tue, 4 Feb 2020 23:26:30 +0000 (15:26 -0800)]
KVM: nVMX: Refactor IO bitmap checks into helper function
Checks against the IO bitmap are useful for both instruction emulation
and VM-exit reflection. Refactor the IO bitmap checks into a helper
function.
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 4 Feb 2020 23:26:29 +0000 (15:26 -0800)]
KVM: nVMX: Don't emulate instructions in guest mode
vmx_check_intercept is not yet fully implemented. To avoid emulating
instructions disallowed by the L1 hypervisor, refuse to emulate
instructions by default.
Cc: stable@vger.kernel.org
[Made commit, added commit msg - Oliver]
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Oliver Upton [Fri, 7 Feb 2020 10:36:07 +0000 (02:36 -0800)]
KVM: nVMX: Emulate MTF when performing instruction emulation
Since commit
5f3d45e7f282 ("kvm/x86: add support for
MONITOR_TRAP_FLAG"), KVM has allowed an L1 guest to use the monitor trap
flag processor-based execution control for its L2 guest. KVM simply
forwards any MTF VM-exits to the L1 guest, which works for normal
instruction execution.
However, when KVM needs to emulate an instruction on the behalf of an L2
guest, the monitor trap flag is not emulated. Add the necessary logic to
kvm_skip_emulated_instruction() to synthesize an MTF VM-exit to L1 upon
instruction emulation for L2.
Fixes: 5f3d45e7f282 ("kvm/x86: add support for MONITOR_TRAP_FLAG")
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Li RongQing [Sun, 23 Feb 2020 08:13:12 +0000 (16:13 +0800)]
KVM: fix error handling in svm_hardware_setup
rename svm_hardware_unsetup as svm_hardware_teardown, move
it before svm_hardware_setup, and call it to free all memory
if fail to setup in svm_hardware_setup, otherwise memory will
be leaked
remove __exit attribute for it since it is called in __init
function
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Geert Uytterhoeven [Wed, 12 Feb 2020 10:10:58 +0000 (11:10 +0100)]
csky: Replace <linux/clk-provider.h> by <linux/of_clk.h>
The C-Sky platform code is not a clock provider, and just needs to call
of_clk_init().
Hence it can include <linux/of_clk.h> instead of <linux/clk-provider.h>.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Linus Torvalds [Sun, 23 Feb 2020 02:02:10 +0000 (18:02 -0800)]
Merge tag 'ras-urgent-2020-02-22' of git://git./linux/kernel/git/tip/tip
Pull RAS fixes from Thomas Gleixner:
"Two fixes for the AMD MCE driver:
- Populate the per CPU MCA bank descriptor pointer only after it has
been completely set up to prevent a use-after-free in case that one
of the subsequent initialization step fails
- Implement a proper release function for the sysfs entries of MCA
threshold controls instead of freeing the memory right in the CPU
teardown code, which leads to another use-after-free when the
associated sysfs file is opened and accessed"
* tag 'ras-urgent-2020-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce/amd: Fix kobject lifetime
x86/mce/amd: Publish the bank pointer only after setup has succeeded
Linus Torvalds [Sun, 23 Feb 2020 01:25:46 +0000 (17:25 -0800)]
Merge tag 'irq-urgent-2020-02-22' of git://git./linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"Two fixes for the irq core code which are follow ups to the recent MSI
fixes:
- The WARN_ON which was put into the MSI setaffinity callback for
paranoia reasons actually triggered via a callchain which escaped
when all the possible ways to reach that code were analyzed.
The proc/irq/$N/*affinity interfaces have a quirk which came in
when ALPHA moved to the generic interface: In case that the written
affinity mask does not contain any online CPU it calls into ALPHAs
magic auto affinity setting code.
A few years later this mechanism was also made available to x86 for
no good reasons and in a way which circumvents all sanity checks
for interrupts which cannot have their affinity set from process
context on X86 due to the way the X86 interrupt delivery works.
It would be possible to make this work properly, but there is no
point in doing so. If the interrupt is not yet started then the
affinity setting has no effect and if it is started already then it
is already assigned to an online CPU so there is no point to
randomly move it to some other CPU. Just return EINVAL as the code
has done before that change forever.
- The new MSI quirk bit in the irq domain flags turned out to be
already occupied, which escaped the author and the reviewers
because the already in use bits were 0,6,2,3,4,5 listed in that
order.
That bit 6 was simply overlooked because the ordering was straight
forward linear otherwise. So the new bit ended up being a
duplicate.
Fix it up by switching the oddball 6 to the obvious 1"
* tag 'irq-urgent-2020-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/irqdomain: Make sure all irq domain flags are distinct
genirq/proc: Reject invalid affinity masks (again)
Linus Torvalds [Sun, 23 Feb 2020 01:08:16 +0000 (17:08 -0800)]
Merge tag 'x86-urgent-2020-02-22' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"Two fixes for x86:
- Remove the __force_oder definiton from the kaslr boot code as it is
already defined in the page table code which makes GCC 10 builds
fail because it changed the default to -fno-common.
- Address the AMD erratum 1054 concerning the IRPERF capability and
enable the Instructions Retired fixed counter on machines which are
not affected by the erratum"
* tag 'x86-urgent-2020-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu/amd: Enable the fixed Instructions Retired counter IRPERF
x86/boot/compressed: Don't declare __force_order in kaslr_64.c
Linus Torvalds [Sat, 22 Feb 2020 19:38:20 +0000 (11:38 -0800)]
Merge tag 'zonefs-5.6-rc3' of git://git./linux/kernel/git/dlemoal/zonefs
Pull zonefs fix from Damien Le Moal:
"A single patch fixing typos in the documentation file"
* tag 'zonefs-5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
zonefs: fix documentation typos etc.
Linus Torvalds [Sat, 22 Feb 2020 19:12:55 +0000 (11:12 -0800)]
Merge tag 'io_uring-5.6-2020-02-22' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"Here's a small collection of fixes that were queued up:
- Remove unnecessary NULL check (Dan)
- Missing io_req_cancelled() call in fallocate (Pavel)
- Put the cleanup check for aux data in the right spot (Pavel)
- Two fixes for SQPOLL (Stefano, Xiaoguang)"
* tag 'io_uring-5.6-2020-02-22' of git://git.kernel.dk/linux-block:
io_uring: fix __io_iopoll_check deadlock in io_sq_thread
io_uring: prevent sq_thread from spinning when it should stop
io_uring: fix use-after-free by io_cleanup_req()
io_uring: remove unnecessary NULL checks
io_uring: add missing io_req_cancelled()
Linus Torvalds [Sat, 22 Feb 2020 19:09:06 +0000 (11:09 -0800)]
Merge tag 'block-5.6-2020-02-22' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Just a set of NVMe fixes via Keith"
* tag 'block-5.6-2020-02-22' of git://git.kernel.dk/linux-block:
nvme-multipath: Fix memory leak with ana_log_buf
nvme: Fix uninitialized-variable warning
nvme-pci: Use single IRQ vector for old Apple models
nvme/pci: Add sleep quirk for Samsung and Toshiba drives
Linus Torvalds [Sat, 22 Feb 2020 19:00:52 +0000 (11:00 -0800)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Four non-core fixes.
Two are reverts of target fixes which turned out to have unwanted side
effects, one is a revert of an RDMA fix with the same problem and the
final one fixes an incorrect warning about memory allocation failures
in megaraid_sas (the driver actually reduces the allocation size until
it succeeds)"
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: Revert "target: iscsi: Wait for all commands to finish before freeing a session"
scsi: Revert "RDMA/isert: Fix a recently introduced regression related to logout"
scsi: megaraid_sas: silence a warning
scsi: Revert "target/core: Inline transport_lun_remove_cmd()"
Linus Torvalds [Sat, 22 Feb 2020 18:52:54 +0000 (10:52 -0800)]
Merge tag 'hwmon-for-v5.6-rc3' of git://git./linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- Fix crash in w83627ehf driver seen with W83627DHG-P
- Fix lockdep splat in acpi_power_meter driver
- Fix xdpe12284 documentation Sphinx warnings
* tag 'hwmon-for-v5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (w83627ehf) Fix crash seen with W83627DHG-P
hwmon: (acpi_power_meter) Fix lockdep splat
Documentation/hwmon: fix xdpe12284 Sphinx warnings
Linus Torvalds [Sat, 22 Feb 2020 18:49:59 +0000 (10:49 -0800)]
Merge tag 'devicetree-fixes-for-5.6-2' of git://git./linux/kernel/git/robh/linux
Pull devicetree fixes deom Rob Herring:
"A handful of fixes in DT bindings for MDIO bus, Allwinner CSI, OMAP
HSMMC, and Tegra124 EMC"
* tag 'devicetree-fixes-for-5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: media: csi: Fix clocks description
dt-bindings: media: csi: Add interconnects properties
dt-bindings: net: mdio: remove compatible string from example
dt-bindings: memory-controller: Update example for Tegra124 EMC
dt-bindings: mmc: omap-hsmmc: Fix SDIO interrupt
Linus Torvalds [Sat, 22 Feb 2020 18:43:41 +0000 (10:43 -0800)]
Merge tag 's390-5.6-4' of git://git./linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Remove ieee_emulation_warnings sysctl which is a dead code.
- Avoid triggering rebuild of the kernel during make install.
- Enable protected virtualization guest support in default configs.
- Fix cio_ignore seq_file .next function to increase position index.
And use kobj_to_dev instead of container_of in cio code.
- Fix storage block address lists to contain absolute addresses in qdio
code.
- Few clang warnings and spelling fixes.
* tag 's390-5.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/qdio: fill SBALEs with absolute addresses
s390/qdio: fill SL with absolute addresses
s390: remove obsolete ieee_emulation_warnings
s390: make 'install' not depend on vmlinux
s390/kaslr: Fix casts in get_random
s390/mm: Explicitly compare PAGE_DEFAULT_KEY against zero in storage_key_init_range
s390/pkey/zcrypt: spelling s/crytp/crypt/
s390/cio: use kobj_to_dev() API
s390/defconfig: enable CONFIG_PROTECTED_VIRTUALIZATION_GUEST
s390/cio: cio_ignore_proc_seq_next should increase position index
Xiaoguang Wang [Sat, 22 Feb 2020 06:46:05 +0000 (14:46 +0800)]
io_uring: fix __io_iopoll_check deadlock in io_sq_thread
Since commit
a3a0e43fd770 ("io_uring: don't enter poll loop if we have
CQEs pending"), if we already events pending, we won't enter poll loop.
In case SETUP_IOPOLL and SETUP_SQPOLL are both enabled, if app has
been terminated and don't reap pending events which are already in cq
ring, and there are some reqs in poll_list, io_sq_thread will enter
__io_iopoll_check(), and find pending events, then return, this loop
will never have a chance to exit.
I have seen this issue in fio stress tests, to fix this issue, let
io_sq_thread call io_iopoll_getevents() with argument 'min' being zero,
and remove __io_iopoll_check().
Fixes: a3a0e43fd770 ("io_uring: don't enter poll loop if we have CQEs pending")
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jan Kara [Fri, 21 Feb 2020 10:08:35 +0000 (11:08 +0100)]
ext4: fix mount failure with quota configured as module
When CONFIG_QFMT_V2 is configured as a module, the test in
ext4_feature_set_ok() fails and so mount of filesystems with quota or
project features fails. Fix the test to use IS_ENABLED macro which
works properly even for modules.
Link: https://lore.kernel.org/r/20200221100835.9332-1-jack@suse.cz
Fixes: d65d87a07476 ("ext4: improve explanation of a mount failure caused by a misconfigured kernel")
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
wangyan [Thu, 20 Feb 2020 13:46:14 +0000 (21:46 +0800)]
jbd2: fix ocfs2 corrupt when clearing block group bits
I found a NULL pointer dereference in ocfs2_block_group_clear_bits().
The running environment:
kernel version: 4.19
A cluster with two nodes, 5 luns mounted on two nodes, and do some
file operations like dd/fallocate/truncate/rm on every lun with storage
network disconnection.
The fallocate operation on dm-23-45 caused an null pointer dereference.
The information of NULL pointer dereference as follows:
[577992.878282] JBD2: Error -5 detected when updating journal superblock for dm-23-45.
[577992.878290] Aborting journal on device dm-23-45.
...
[577992.890778] JBD2: Error -5 detected when updating journal superblock for dm-24-46.
[577992.890908] __journal_remove_journal_head: freeing b_committed_data
[577992.890916] (fallocate,88392,52):ocfs2_extend_trans:474 ERROR: status = -30
[577992.890918] __journal_remove_journal_head: freeing b_committed_data
[577992.890920] (fallocate,88392,52):ocfs2_rotate_tree_right:2500 ERROR: status = -30
[577992.890922] __journal_remove_journal_head: freeing b_committed_data
[577992.890924] (fallocate,88392,52):ocfs2_do_insert_extent:4382 ERROR: status = -30
[577992.890928] (fallocate,88392,52):ocfs2_insert_extent:4842 ERROR: status = -30
[577992.890928] __journal_remove_journal_head: freeing b_committed_data
[577992.890930] (fallocate,88392,52):ocfs2_add_clusters_in_btree:4947 ERROR: status = -30
[577992.890933] __journal_remove_journal_head: freeing b_committed_data
[577992.890939] __journal_remove_journal_head: freeing b_committed_data
[577992.890949] Unable to handle kernel NULL pointer dereference at virtual address
0000000000000020
[577992.890950] Mem abort info:
[577992.890951] ESR = 0x96000004
[577992.890952] Exception class = DABT (current EL), IL = 32 bits
[577992.890952] SET = 0, FnV = 0
[577992.890953] EA = 0, S1PTW = 0
[577992.890954] Data abort info:
[577992.890955] ISV = 0, ISS = 0x00000004
[577992.890956] CM = 0, WnR = 0
[577992.890958] user pgtable: 4k pages, 48-bit VAs, pgdp =
00000000f8da07a9
[577992.890960] [
0000000000000020] pgd=
0000000000000000
[577992.890964] Internal error: Oops:
96000004 [#1] SMP
[577992.890965] Process fallocate (pid: 88392, stack limit = 0x00000000013db2fd)
[577992.890968] CPU: 52 PID: 88392 Comm: fallocate Kdump: loaded Tainted: G W OE 4.19.36 #1
[577992.890969] Hardware name: Huawei TaiShan 2280 V2/BC82AMDD, BIOS 0.98 08/25/2019
[577992.890971] pstate:
60400009 (nZCv daif +PAN -UAO)
[577992.891054] pc : _ocfs2_free_suballoc_bits+0x63c/0x968 [ocfs2]
[577992.891082] lr : _ocfs2_free_suballoc_bits+0x618/0x968 [ocfs2]
[577992.891084] sp :
ffff0000c8e2b810
[577992.891085] x29:
ffff0000c8e2b820 x28:
0000000000000000
[577992.891087] x27:
00000000000006f3 x26:
ffffa07957b02e70
[577992.891089] x25:
ffff807c59d50000 x24:
00000000000006f2
[577992.891091] x23:
0000000000000001 x22:
ffff807bd39abc30
[577992.891093] x21:
ffff0000811d9000 x20:
ffffa07535d6a000
[577992.891097] x19:
ffff000001681638 x18:
ffffffffffffffff
[577992.891098] x17:
0000000000000000 x16:
ffff000080a03df0
[577992.891100] x15:
ffff0000811d9708 x14:
203d207375746174
[577992.891101] x13:
73203a524f525245 x12:
20373439343a6565
[577992.891103] x11:
0000000000000038 x10:
0101010101010101
[577992.891106] x9 :
ffffa07c68a85d70 x8 :
7f7f7f7f7f7f7f7f
[577992.891109] x7 :
0000000000000000 x6 :
0000000000000080
[577992.891110] x5 :
0000000000000000 x4 :
0000000000000002
[577992.891112] x3 :
ffff000001713390 x2 :
2ff90f88b1c22f00
[577992.891114] x1 :
ffff807bd39abc30 x0 :
0000000000000000
[577992.891116] Call trace:
[577992.891139] _ocfs2_free_suballoc_bits+0x63c/0x968 [ocfs2]
[577992.891162] _ocfs2_free_clusters+0x100/0x290 [ocfs2]
[577992.891185] ocfs2_free_clusters+0x50/0x68 [ocfs2]
[577992.891206] ocfs2_add_clusters_in_btree+0x198/0x5e0 [ocfs2]
[577992.891227] ocfs2_add_inode_data+0x94/0xc8 [ocfs2]
[577992.891248] ocfs2_extend_allocation+0x1bc/0x7a8 [ocfs2]
[577992.891269] ocfs2_allocate_extents+0x14c/0x338 [ocfs2]
[577992.891290] __ocfs2_change_file_space+0x3f8/0x610 [ocfs2]
[577992.891309] ocfs2_fallocate+0xe4/0x128 [ocfs2]
[577992.891316] vfs_fallocate+0x11c/0x250
[577992.891317] ksys_fallocate+0x54/0x88
[577992.891319] __arm64_sys_fallocate+0x28/0x38
[577992.891323] el0_svc_common+0x78/0x130
[577992.891325] el0_svc_handler+0x38/0x78
[577992.891327] el0_svc+0x8/0xc
My analysis process as follows:
ocfs2_fallocate
__ocfs2_change_file_space
ocfs2_allocate_extents
ocfs2_extend_allocation
ocfs2_add_inode_data
ocfs2_add_clusters_in_btree
ocfs2_insert_extent
ocfs2_do_insert_extent
ocfs2_rotate_tree_right
ocfs2_extend_rotate_transaction
ocfs2_extend_trans
jbd2_journal_restart
jbd2__journal_restart
/* handle->h_transaction is NULL,
* is_handle_aborted(handle) is true
*/
handle->h_transaction = NULL;
start_this_handle
return -EROFS;
ocfs2_free_clusters
_ocfs2_free_clusters
_ocfs2_free_suballoc_bits
ocfs2_block_group_clear_bits
ocfs2_journal_access_gd
__ocfs2_journal_access
jbd2_journal_get_undo_access
/* I think jbd2_write_access_granted() will
* return true, because do_get_write_access()
* will return -EROFS.
*/
if (jbd2_write_access_granted(...)) return 0;
do_get_write_access
/* handle->h_transaction is NULL, it will
* return -EROFS here, so do_get_write_access()
* was not called.
*/
if (is_handle_aborted(handle)) return -EROFS;
/* bh2jh(group_bh) is NULL, caused NULL
pointer dereference */
undo_bg = (struct ocfs2_group_desc *)
bh2jh(group_bh)->b_committed_data;
If handle->h_transaction == NULL, then jbd2_write_access_granted()
does not really guarantee that journal_head will stay around,
not even speaking of its b_committed_data. The bh2jh(group_bh)
can be removed after ocfs2_journal_access_gd() and before call
"bh2jh(group_bh)->b_committed_data". So, we should move
is_handle_aborted() check from do_get_write_access() into
jbd2_journal_get_undo_access() and jbd2_journal_get_write_access()
before the call to jbd2_write_access_granted().
Link: https://lore.kernel.org/r/f72a623f-b3f1-381a-d91d-d22a1c83a336@huawei.com
Signed-off-by: Yan Wang <wangyan122@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jun Piao <piaojun@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org
Eric Biggers [Wed, 19 Feb 2020 18:30:47 +0000 (10:30 -0800)]
ext4: fix race between writepages and enabling EXT4_EXTENTS_FL
If EXT4_EXTENTS_FL is set on an inode while ext4_writepages() is running
on it, the following warning in ext4_add_complete_io() can be hit:
WARNING: CPU: 1 PID: 0 at fs/ext4/page-io.c:234 ext4_put_io_end_defer+0xf0/0x120
Here's a minimal reproducer (not 100% reliable) (root isn't required):
while true; do
sync
done &
while true; do
rm -f file
touch file
chattr -e file
echo X >> file
chattr +e file
done
The problem is that in ext4_writepages(), ext4_should_dioread_nolock()
(which only returns true on extent-based files) is checked once to set
the number of reserved journal credits, and also again later to select
the flags for ext4_map_blocks() and copy the reserved journal handle to
ext4_io_end::handle. But if EXT4_EXTENTS_FL is being concurrently set,
the first check can see dioread_nolock disabled while the later one can
see it enabled, causing the reserved handle to unexpectedly be NULL.
Since changing EXT4_EXTENTS_FL is uncommon, and there may be other races
related to doing so as well, fix this by synchronizing changing
EXT4_EXTENTS_FL with ext4_writepages() via the existing
s_writepages_rwsem (previously called s_journal_flag_rwsem).
This was originally reported by syzbot without a reproducer at
https://syzkaller.appspot.com/bug?extid=
2202a584a00fffd19fbf,
but now that dioread_nolock is the default I also started seeing this
when running syzkaller locally.
Link: https://lore.kernel.org/r/20200219183047.47417-3-ebiggers@kernel.org
Reported-by: syzbot+2202a584a00fffd19fbf@syzkaller.appspotmail.com
Fixes: 6b523df4fb5a ("ext4: use transaction reservation for extent conversion in ext4_end_io")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org
Eric Biggers [Wed, 19 Feb 2020 18:30:46 +0000 (10:30 -0800)]
ext4: rename s_journal_flag_rwsem to s_writepages_rwsem
In preparation for making s_journal_flag_rwsem synchronize
ext4_writepages() with changes to both the EXTENTS and JOURNAL_DATA
flags (rather than just JOURNAL_DATA as it does currently), rename it to
s_writepages_rwsem.
Link: https://lore.kernel.org/r/20200219183047.47417-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org
Suraj Jitindar Singh [Wed, 19 Feb 2020 03:08:51 +0000 (19:08 -0800)]
ext4: fix potential race between s_flex_groups online resizing and access
During an online resize an array of s_flex_groups structures gets replaced
so it can get enlarged. If there is a concurrent access to the array and
this memory has been reused then this can lead to an invalid memory access.
The s_flex_group array has been converted into an array of pointers rather
than an array of structures. This is to ensure that the information
contained in the structures cannot get out of sync during a resize due to
an accessor updating the value in the old structure after it has been
copied but before the array pointer is updated. Since the structures them-
selves are no longer copied but only the pointers to them this case is
mitigated.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206443
Link: https://lore.kernel.org/r/20200221053458.730016-4-tytso@mit.edu
Signed-off-by: Suraj Jitindar Singh <surajjs@amazon.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Linus Torvalds [Sat, 22 Feb 2020 00:10:10 +0000 (16:10 -0800)]
Merge tag 'for-linus-5.6-rc3-tag' of git://git./linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Two small fixes for Xen:
- a fix to avoid warnings with new gcc
- a fix for incorrectly disabled interrupts when calling
_cond_resched()"
* tag 'for-linus-5.6-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: Enable interrupts when calling _cond_resched()
x86/xen: Distribute switch variables for initialization
Linus Torvalds [Sat, 22 Feb 2020 00:03:36 +0000 (16:03 -0800)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"It's all straightforward apart from the changes to mmap()/mremap() in
relation to their handling of address arguments from userspace with
non-zero tag bits in the upper byte.
The change to brk() is necessary to fix a nasty user-visible
regression in malloc(), but we tightened up mmap() and mremap() at the
same time because they also allow the user to create virtual aliases
by accident. It's much less likely than brk() to matter in practice,
but enforcing the principle of "don't permit the creation of mappings
using tagged addresses" leads to a straightforward ABI without having
to worry about the "but what if a crazy program did foo?" aspect of
things.
Summary:
- Fix regression in malloc() caused by ignored address tags in brk()
- Add missing brackets around argument to untagged_addr() macro
- Fix clang build when using binutils assembler
- Fix silly typo in virtual memory map documentation"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
mm: Avoid creating virtual address aliases in brk()/mmap()/mremap()
docs: arm64: fix trivial spelling enought to enough in memory.rst
arm64: memory: Add missing brackets to untagged_addr() macro
arm64: lse: Fix LSE atomics with LLVM
Linus Torvalds [Fri, 21 Feb 2020 23:57:56 +0000 (15:57 -0800)]
Merge tag 'powerpc-5.6-3' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Some more powerpc fixes for 5.6. This is two weeks worth as I was out
sick last week:
- Three fixes for the recently added VMAP_STACK on 32-bit.
- Three fixes related to hugepages on 8xx (32-bit).
- A fix for a bug in our transactional memory handling that could
lead to a kernel crash if we saw a page fault during signal
delivery.
- A fix for a deadlock in our PCI EEH (Enhanced Error Handling) code.
- A couple of other minor fixes.
Thanks to: Christophe Leroy, Erhard F, Frederic Barrat, Gustavo Luiz
Duarte, Larry Finger, Leonardo Bras, Oliver O'Halloran, Sam Bobroff"
* tag 'powerpc-5.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/entry: Fix an #if which should be an #ifdef in entry_32.S
powerpc/xmon: Fix whitespace handling in getstring()
powerpc/6xx: Fix power_save_ppc32_restore() with CONFIG_VMAP_STACK
powerpc/chrp: Fix enter_rtas() with CONFIG_VMAP_STACK
powerpc/32s: Fix DSI and ISI exceptions for CONFIG_VMAP_STACK
powerpc/tm: Fix clearing MSR[TS] in current when reclaiming on signal delivery
powerpc/8xx: Fix clearing of bits 20-23 in ITLB miss
powerpc/hugetlb: Fix 8M hugepages on 8xx
powerpc/hugetlb: Fix 512k hugepages on 8xx with 16k page size
powerpc/eeh: Fix deadlock handling dead PHB
Linus Torvalds [Fri, 21 Feb 2020 21:02:49 +0000 (13:02 -0800)]
Merge tag 'linux-watchdog-5.6-rc3' of git://linux-watchdog.org/linux-watchdog
Pull watchdog fixes from Wim Van Sebroeck:
- mtk_wdt needs RESET_CONTROLLER to build
- da9062 driver fixes:
- fix power management ops
- do not ping the hw during stop()
- add dependency on I2C
* tag 'linux-watchdog-5.6-rc3' of git://www.linux-watchdog.org/linux-watchdog:
watchdog: da9062: Add dependency on I2C
watchdog: da9062: fix power management ops
watchdog: da9062: do not ping the hw during stop()
watchdog: fix mtk_wdt.c RESET_CONTROLLER build error
Linus Torvalds [Fri, 21 Feb 2020 20:57:05 +0000 (12:57 -0800)]
Merge tag 'char-misc-5.6-rc3' of git://git./linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc driver fixes for 5.6-rc3.
Also included in here are some updates for some documentation files
that I seem to be maintaining these days.
The driver fixes are:
- small fixes for the habanalabs driver
- fsi driver bugfix
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
Documentation/process: Swap out the ambassador for Canonical
habanalabs: patched cb equals user cb in device memset
habanalabs: do not halt CoreSight during hard reset
habanalabs: halt the engines before hard-reset
MAINTAINERS: remove unnecessary ':' characters
fsi: aspeed: add unspecified HAS_IOMEM dependency
COPYING: state that all contributions really are covered by this file
Documentation/process: Change Microsoft contact for embargoed hardware issues
embargoed-hardware-issues: drop Amazon contact as the email address now bounces
Documentation/process: Add Arm contact for embargoed HW issues
Linus Torvalds [Fri, 21 Feb 2020 20:53:53 +0000 (12:53 -0800)]
Merge tag 'staging-5.6-rc3' of git://git./linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some small staging driver fixes for 5.6-rc3, along with the
removal of an unused/unneeded driver as well.
The android vsoc driver is not needed anymore by anyone, so it was
removed.
The other driver fixes are:
- ashmem bugfixes
- greybus audio driver bugfix
- wireless driver bugfixes and tiny cleanups to error paths
All of these have been in linux-next for a while now with no reported
issues"
* tag 'staging-5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: rtl8723bs: Remove unneeded goto statements
staging: rtl8188eu: Remove some unneeded goto statements
staging: rtl8723bs: Fix potential overuse of kernel memory
staging: rtl8188eu: Fix potential overuse of kernel memory
staging: rtl8723bs: Fix potential security hole
staging: rtl8188eu: Fix potential security hole
staging: greybus: use after free in gb_audio_manager_remove_all()
staging: android: Delete the 'vsoc' driver
staging: rtl8723bs: fix copy of overlapping memory
staging: android: ashmem: Disallow ashmem memory from being remapped
staging: vt6656: fix sign of rx_dbm to bb_pre_ed_rssi.
Linus Torvalds [Fri, 21 Feb 2020 20:48:29 +0000 (12:48 -0800)]
Merge tag 'tty-5.6-rc3' of git://git./linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are a number of small tty and serial driver fixes for 5.6-rc3
that resolve a bunch of reported issues.
They are:
- vt selection and ioctl fixes
- serdev bugfix
- atmel serial driver fixes
- qcom serial driver fixes
- other minor serial driver fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
vt: selection, close sel_buffer race
vt: selection, handle pending signals in paste_selection
serial: cpm_uart: call cpm_muram_init before registering console
tty: serial: qcom_geni_serial: Fix RX cancel command failure
serial: 8250: Check UPF_IRQ_SHARED in advance
tty: serial: imx: setup the correct sg entry for tx dma
vt: vt_ioctl: fix race in VT_RESIZEX
vt: fix scrollback flushing on background consoles
tty: serial: tegra: Handle RX transfer in PIO mode if DMA wasn't started
tty/serial: atmel: manage shutdown in case of RS485 or ISO7816 mode
serdev: ttyport: restore client ops on deregistration
serial: ar933x_uart: set UART_CS_{RX,TX}_READY_ORIDE
Linus Torvalds [Fri, 21 Feb 2020 20:44:53 +0000 (12:44 -0800)]
Merge tag 'usb-5.6-rc3' of git://git./linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt fixes from Greg KH:
"Here are a number of small USB driver fixes for 5.6-rc3.
Included in here are:
- MAINTAINER file updates
- USB gadget driver fixes
- usb core quirk additions and fixes for regressions
- xhci driver fixes
- usb serial driver id additions and fixes
- thunderbolt bugfix
Thunderbolt patches come in through here now that USB4 is really
thunderbolt.
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (34 commits)
USB: misc: iowarrior: add support for the 100 device
thunderbolt: Prevent crash if non-active NVMem file is read
usb: gadget: udc-xilinx: Fix xudc_stop() kernel-doc format
USB: misc: iowarrior: add support for the 28 and 28L devices
USB: misc: iowarrior: add support for 2 OEMed devices
USB: Fix novation SourceControl XL after suspend
xhci: Fix memory leak when caching protocol extended capability PSI tables - take 2
Revert "xhci: Fix memory leak when caching protocol extended capability PSI tables"
MAINTAINERS: Sort entries in database for THUNDERBOLT
usb: dwc3: debug: fix string position formatting mixup with ret and len
usb: gadget: serial: fix Tx stall after buffer overflow
usb: gadget: ffs: ffs_aio_cancel(): Save/restore IRQ flags
usb: dwc2: Fix SET/CLEAR_FEATURE and GET_STATUS flows
usb: dwc2: Fix in ISOC request length checking
usb: gadget: composite: Support more than 500mA MaxPower
usb: gadget: composite: Fix bMaxPower for SuperSpeedPlus
usb: gadget: u_audio: Fix high-speed max packet size
usb: dwc3: gadget: Check for IOC/LST bit in TRB->ctrl fields
USB: core: clean up endpoint-descriptor parsing
USB: quirks: blacklist duplicate ep on Sound Devices USBPre2
...
Linus Torvalds [Fri, 21 Feb 2020 20:18:02 +0000 (12:18 -0800)]
Merge tag 'drm-fixes-2020-02-21' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Varied fixes for rc3.
i915 is the largest, they are seeing some ACPI problems with their CI
which hopefully get solved soon [1].
msm has a bunch of fixes for new hw added in the merge, a bunch of
amdgpu fixes, and nouveau adds support for some new firmwares for
turing tu11x GPUs that were just released into linux-firmware by
nvidia, they operate the same as the ones we already have for tu10x so
should be fine to hook up.
Otherwise it's just misc fixes for panfrost and sun4i.
core:
- Allow only one rotation argument, and allow zero rotation in video
cmdline.
i915:
- Workaround missing Display Stream Compression (DSC) state readout
by forcing modeset when its enabled at probe
- Fix EHL port clock voltage level requirements
- Fix queuing retire workers on the virtual engine
- Fix use of partially initialized waiters
- Stop using drm_pci_alloc/drm_pci/free
- Fix rewind of RING_TAIL by forcing a context reload
- Fix locking on resetting ring->head
- Propagate our bug filing URL change to stable kernels
panfrost:
- Small compiler warning fix for panfrost.
- Fix when using performance counters in panfrost when using per fd
address space.
sun4xi:
- Fix dt binding
nouveau:
- tu11x modesetting fix
- ACR/GR firmware support for tu11x (fw is public now)
msm:
- fix UBWC on GPU and display side for sc7180
- fix DSI suspend/resume issue encountered on sc7180
- fix some breakage on so called "linux-android" devices
(fallout from sc7180/a618 support, not seen earlier due to
bootloader/firmware differences)
- couple other misc fixes
amdgpu:
- HDCP fixes
- xclk fix for raven
- GFXOFF fixes"
[1] The Intel suspend testing should now be fixed by commit
63fb9623427f
("ACPI: PM: s2idle: Check fixed wakeup events in acpi_s2idle_wake()")
* tag 'drm-fixes-2020-02-21' of git://anongit.freedesktop.org/drm/drm: (39 commits)
drm/amdgpu/display: clean up hdcp workqueue handling
drm/amdgpu: add is_raven_kicker judgement for raven1
drm/i915/gt: Avoid resetting ring->head outside of its timeline mutex
drm/i915/execlists: Always force a context reload when rewinding RING_TAIL
drm/i915: Wean off drm_pci_alloc/drm_pci_free
drm/i915/gt: Protect defer_request() from new waiters
drm/i915/gt: Prevent queuing retire workers on the virtual engine
drm/i915/dsc: force full modeset whenever DSC is enabled at probe
drm/i915/ehl: Update port clock voltage level requirements
drm/i915: Update drm/i915 bug filing URL
MAINTAINERS: Update drm/i915 bug filing URL
drm/i915: Initialise basic fence before acquiring seqno
drm/i915/gem: Require per-engine reset support for non-persistent contexts
drm/nouveau/kms/gv100-: Re-set LUT after clearing for modesets
drm/nouveau/gr/tu11x: initial support
drm/nouveau/acr/tu11x: initial support
drm/amdgpu/gfx10: disable gfxoff when reading rlc clock
drm/amdgpu/gfx9: disable gfxoff when reading rlc clock
drm/amdgpu/soc15: fix xclk for raven
drm/amd/powerplay: always refetch the enabled features status on dpm enablement
...
Linus Torvalds [Fri, 21 Feb 2020 19:59:51 +0000 (11:59 -0800)]
Merge git://git./linux/kernel/git/netdev/net
Pull networking fixes from David Miller:
1) Limit xt_hashlimit hash table size to avoid OOM or hung tasks, from
Cong Wang.
2) Fix deadlock in xsk by publishing global consumer pointers when NAPI
is finished, from Magnus Karlsson.
3) Set table field properly to RT_TABLE_COMPAT when necessary, from
Jethro Beekman.
4) NLA_STRING attributes are not necessary NULL terminated, deal wiht
that in IFLA_ALT_IFNAME. From Eric Dumazet.
5) Fix checksum handling in atlantic driver, from Dmitry Bezrukov.
6) Handle mtu==0 devices properly in wireguard, from Jason A.
Donenfeld.
7) Fix several lockdep warnings in bonding, from Taehee Yoo.
8) Fix cls_flower port blocking, from Jason Baron.
9) Sanitize internal map names in libbpf, from Toke Høiland-Jørgensen.
10) Fix RDMA race in qede driver, from Michal Kalderon.
11) Fix several false lockdep warnings by adding conditions to
list_for_each_entry_rcu(), from Madhuparna Bhowmik.
12) Fix sleep in atomic in mlx5 driver, from Huy Nguyen.
13) Fix potential deadlock in bpf_map_do_batch(), from Yonghong Song.
14) Hey, variables declared in switch statement before any case
statements are not initialized. I learn something every day. Get
rids of this stuff in several parts of the networking, from Kees
Cook.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (99 commits)
bnxt_en: Issue PCIe FLR in kdump kernel to cleanup pending DMAs.
bnxt_en: Improve device shutdown method.
net: netlink: cap max groups which will be considered in netlink_bind()
net: thunderx: workaround BGX TX Underflow issue
ionic: fix fw_status read
net: disable BRIDGE_NETFILTER by default
net: macb: Properly handle phylink on at91rm9200
s390/qeth: fix off-by-one in RX copybreak check
s390/qeth: don't warn for napi with 0 budget
s390/qeth: vnicc Fix EOPNOTSUPP precedence
openvswitch: Distribute switch variables for initialization
net: ip6_gre: Distribute switch variables for initialization
net: core: Distribute switch variables for initialization
udp: rehash on disconnect
net/tls: Fix to avoid gettig invalid tls record
bpf: Fix a potential deadlock with bpf_map_do_batch
bpf: Do not grab the bucket spinlock by default on htab batch ops
ice: Wait for VF to be reset/ready before configuration
ice: Don't tell the OS that link is going down
ice: Don't reject odd values of usecs set by user
...
Linus Torvalds [Fri, 21 Feb 2020 19:40:10 +0000 (11:40 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
- A few y2038 fixes which missed the merge window while dependencies
in NFS were being sorted out.
- A bunch of fixes. Some minor, some not.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
MAINTAINERS: use tabs for SAFESETID
lib/stackdepot.c: fix global out-of-bounds in stack_slabs
mm/sparsemem: pfn_to_page is not valid yet on SPARSEMEM
mm/vmscan.c: don't round up scan size for online memory cgroup
lib/string.c: update match_string() doc-strings with correct behavior
mm/memcontrol.c: lost css_put in memcg_expand_shrinker_maps()
mm/swapfile.c: fix a comment in sys_swapon()
scripts/get_maintainer.pl: deprioritize old Fixes: addresses
get_maintainer: remove uses of P: for maintainer name
selftests/vm: add missed tests in run_vmtests
include/uapi/linux/swab.h: fix userspace breakage, use __BITS_PER_LONG for swap
Revert "ipc,sem: remove uneeded sem_undo_list lock usage in exit_sem()"
y2038: hide timeval/timespec/itimerval/itimerspec types
y2038: remove unused time32 interfaces
y2038: remove ktime to/from timespec/timeval conversion
Randy Dunlap [Fri, 21 Feb 2020 04:04:33 +0000 (20:04 -0800)]
MAINTAINERS: use tabs for SAFESETID
Use tabs for indentation instead of spaces for SAFESETID. All (!) other
entries in MAINTAINERS use tabs (according to my simple grepping).
Link: http://lkml.kernel.org/r/2bb2e52a-2694-816d-57b4-6cabfadd6c1a@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Micah Morton <mortonm@chromium.org>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexander Potapenko [Fri, 21 Feb 2020 04:04:30 +0000 (20:04 -0800)]
lib/stackdepot.c: fix global out-of-bounds in stack_slabs
Walter Wu has reported a potential case in which init_stack_slab() is
called after stack_slabs[STACK_ALLOC_MAX_SLABS - 1] has already been
initialized. In that case init_stack_slab() will overwrite
stack_slabs[STACK_ALLOC_MAX_SLABS], which may result in a memory
corruption.
Link: http://lkml.kernel.org/r/20200218102950.260263-1-glider@google.com
Fixes: cd11016e5f521 ("mm, kasan: stackdepot implementation. Enable stackdepot for SLAB")
Signed-off-by: Alexander Potapenko <glider@google.com>
Reported-by: Walter Wu <walter-zh.wu@mediatek.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Wei Yang [Fri, 21 Feb 2020 04:04:27 +0000 (20:04 -0800)]
mm/sparsemem: pfn_to_page is not valid yet on SPARSEMEM
When we use SPARSEMEM instead of SPARSEMEM_VMEMMAP, pfn_to_page()
doesn't work before sparse_init_one_section() is called.
This leads to a crash when hotplug memory:
BUG: unable to handle page fault for address:
0000000006400000
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: 0002 [#1] SMP PTI
CPU: 3 PID: 221 Comm: kworker/u16:1 Tainted: G W 5.5.0-next-
20200205+ #343
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015
Workqueue: kacpi_hotplug acpi_hotplug_work_fn
RIP: 0010:__memset+0x24/0x30
Code: cc cc cc cc cc cc 0f 1f 44 00 00 49 89 f9 48 89 d1 83 e2 07 48 c1 e9 03 40 0f b6 f6 48 b8 01 01 01 01 01 01 01 01 48 0f af c6 <f3> 48 ab 89 d1 f3 aa 4c 89 c8 c3 90 49 89 f9 40 88 f0 48 89 d1 f3
RSP: 0018:
ffffb43ac0373c80 EFLAGS:
00010a87
RAX:
ffffffffffffffff RBX:
ffff8a1518800000 RCX:
0000000000050000
RDX:
0000000000000000 RSI:
00000000000000ff RDI:
0000000006400000
RBP:
0000000000140000 R08:
0000000000100000 R09:
0000000006400000
R10:
0000000000000000 R11:
0000000000000002 R12:
0000000000000000
R13:
0000000000000028 R14:
0000000000000000 R15:
ffff8a153ffd9280
FS:
0000000000000000(0000) GS:
ffff8a153ab00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000006400000 CR3:
0000000136fca000 CR4:
00000000000006e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
sparse_add_section+0x1c9/0x26a
__add_pages+0xbf/0x150
add_pages+0x12/0x60
add_memory_resource+0xc8/0x210
__add_memory+0x62/0xb0
acpi_memory_device_add+0x13f/0x300
acpi_bus_attach+0xf6/0x200
acpi_bus_scan+0x43/0x90
acpi_device_hotplug+0x275/0x3d0
acpi_hotplug_work_fn+0x1a/0x30
process_one_work+0x1a7/0x370
worker_thread+0x30/0x380
kthread+0x112/0x130
ret_from_fork+0x35/0x40
We should use memmap as it did.
On x86 the impact is limited to x86_32 builds, or x86_64 configurations
that override the default setting for SPARSEMEM_VMEMMAP.
Other memory hotplug archs (arm64, ia64, and ppc) also default to
SPARSEMEM_VMEMMAP=y.
[dan.j.williams@intel.com: changelog update]
{rppt@linux.ibm.com: changelog update]
Link: http://lkml.kernel.org/r/20200219030454.4844-1-bhe@redhat.com
Fixes: ba72b4c8cf60 ("mm/sparsemem: support sub-section hotplug")
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Gavin Shan [Fri, 21 Feb 2020 04:04:24 +0000 (20:04 -0800)]
mm/vmscan.c: don't round up scan size for online memory cgroup
Commit
68600f623d69 ("mm: don't miss the last page because of round-off
error") makes the scan size round up to @denominator regardless of the
memory cgroup's state, online or offline. This affects the overall
reclaiming behavior: the corresponding LRU list is eligible for
reclaiming only when its size logically right shifted by @sc->priority
is bigger than zero in the former formula.
For example, the inactive anonymous LRU list should have at least 0x4000
pages to be eligible for reclaiming when we have 60/12 for
swappiness/priority and without taking scan/rotation ratio into account.
After the roundup is applied, the inactive anonymous LRU list becomes
eligible for reclaiming when its size is bigger than or equal to 0x1000
in the same condition.
(0x4000 >> 12) * 60 / (60 + 140 + 1) = 1
((0x1000 >> 12) * 60) + 200) / (60 + 140 + 1) = 1
aarch64 has 512MB huge page size when the base page size is 64KB. The
memory cgroup that has a huge page is always eligible for reclaiming in
that case.
The reclaiming is likely to stop after the huge page is reclaimed,
meaing the further iteration on @sc->priority and the silbing and child
memory cgroups will be skipped. The overall behaviour has been changed.
This fixes the issue by applying the roundup to offlined memory cgroups
only, to give more preference to reclaim memory from offlined memory
cgroup. It sounds reasonable as those memory is unlikedly to be used by
anyone.
The issue was found by starting up 8 VMs on a Ampere Mustang machine,
which has 8 CPUs and 16 GB memory. Each VM is given with 2 vCPUs and
2GB memory. It took 264 seconds for all VMs to be completely up and
784MB swap is consumed after that. With this patch applied, it took 236
seconds and 60MB swap to do same thing. So there is 10% performance
improvement for my case. Note that KSM is disable while THP is enabled
in the testing.
total used free shared buff/cache available
Mem: 16196 10065 2049 16 4081 3749
Swap: 8175 784 7391
total used free shared buff/cache available
Mem: 16196 11324 3656 24 1215 2936
Swap: 8175 60 8115
Link: http://lkml.kernel.org/r/20200211024514.8730-1-gshan@redhat.com
Fixes: 68600f623d69 ("mm: don't miss the last page because of round-off error")
Signed-off-by: Gavin Shan <gshan@redhat.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: <stable@vger.kernel.org> [4.20+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexandru Ardelean [Fri, 21 Feb 2020 04:04:21 +0000 (20:04 -0800)]
lib/string.c: update match_string() doc-strings with correct behavior
There were a few attempts at changing behavior of the match_string()
helpers (i.e. 'match_string()' & 'sysfs_match_string()'), to change &
extend the behavior according to the doc-string.
But the simplest approach is to just fix the doc-strings. The current
behavior is fine as-is, and some bugs were introduced trying to fix it.
As for extending the behavior, new helpers can always be introduced if
needed.
The match_string() helpers behave more like 'strncmp()' in the sense
that they go up to n elements or until the first NULL element in the
array of strings.
This change updates the doc-strings with this info.
Link: http://lkml.kernel.org/r/20200213072722.8249-1-alexandru.ardelean@analog.com
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: "Tobin C . Harding" <tobin@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vasily Averin [Fri, 21 Feb 2020 04:04:18 +0000 (20:04 -0800)]
mm/memcontrol.c: lost css_put in memcg_expand_shrinker_maps()
for_each_mem_cgroup() increases css reference counter for memory cgroup
and requires to use mem_cgroup_iter_break() if the walk is cancelled.
Link: http://lkml.kernel.org/r/c98414fb-7e1f-da0f-867a-9340ec4bd30b@virtuozzo.com
Fixes: 0a4465d34028 ("mm, memcg: assign memcg-aware shrinkers bitmap to memcg")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Acked-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Christoph Hellwig [Fri, 21 Feb 2020 04:04:15 +0000 (20:04 -0800)]
mm/swapfile.c: fix a comment in sys_swapon()
claim_swapfile now always takes i_rwsem.
Link: http://lkml.kernel.org/r/20200114161225.309792-2-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Douglas Anderson [Fri, 21 Feb 2020 04:04:12 +0000 (20:04 -0800)]
scripts/get_maintainer.pl: deprioritize old Fixes: addresses
Recently, I found that get_maintainer was causing me to send emails to
the old addresses for maintainers. Since I usually just trust the
output of get_maintainer to know the right email address, I didn't even
look carefully and fired off two patch series that went to the wrong
place. Oops.
The problem was introduced recently when trying to add signatures from
Fixes. The problem was that these email addresses were added too early
in the process of compiling our list of places to send. Things added to
the list earlier are considered more canonical and when we later added
maintainer entries we ended up deduplicating to the old address.
Here are two examples using mainline commits (to make it easier to
replicate) for the two maintainers that I messed up recently:
$ git format-patch
d8549bcd0529~..
d8549bcd0529
$ ./scripts/get_maintainer.pl 0001-clk-Add-clk_hw*.patch | grep Boyd
Stephen Boyd <sboyd@codeaurora.org>...
$ git format-patch
6d1238aa3395~..
6d1238aa3395
$ ./scripts/get_maintainer.pl 0001-arm64-dts-qcom-qcs404*.patch | grep Andy
Andy Gross <andy.gross@linaro.org>
Let's move the adding of addresses from Fixes: to the end since the
email addresses from these are much more likely to be older.
After this patch the above examples get the right addresses for the two
examples.
Link: http://lkml.kernel.org/r/20200127095001.1.I41fba9f33590bfd92cd01960161d8384268c6569@changeid
Fixes: 2f5bd343694e ("scripts/get_maintainer.pl: add signatures from Fixes: <badcommit> lines in commit message")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Joe Perches <joe@perches.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Andy Gross <agross@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Perches [Fri, 21 Feb 2020 04:04:09 +0000 (20:04 -0800)]
get_maintainer: remove uses of P: for maintainer name
Commit
1ca84ed6425f ("MAINTAINERS: Reclaim the P: tag for Maintainer
Entry Profile") changed the use of the "P:" tag from "Person" to
"Profile (ie: special subsystem coding styles and characteristics)"
Change how get_maintainer.pl parses the "P:" tag to match.
Link: http://lkml.kernel.org/r/ca53823fc5d25c0be32ad937d0207a0589c08643.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Dan Williams <dan.j.william@intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
SeongJae Park [Fri, 21 Feb 2020 04:04:06 +0000 (20:04 -0800)]
selftests/vm: add missed tests in run_vmtests
The commits introducing 'mlock-random-test'[1], 'map_fiex_noreplace'[2],
and 'thuge-gen'[3] have not added those in the 'run_vmtests' script and
thus the 'run_tests' command of kselftests doesn't run those. This
commit adds those in the script.
'gup_benchmark' and 'transhuge-stress' are also not included in the
'run_vmtests', but this commit does not add those because those are for
performance measurement rather than pass/fail tests.
[1] commit
26b4224d9961 ("selftests: expanding more mlock selftest")
[2] commit
91cbacc34512 ("tools/testing/selftests/vm/map_fixed_noreplace.c: add test for MAP_FIXED_NOREPLACE")
[3] commit
fcc1f2d5dd34 ("selftests: add a test program for variable huge page sizes in mmap/shmget")
Link: http://lkml.kernel.org/r/20200206085144.29126-1-sj38.park@gmail.com
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Christian Borntraeger [Fri, 21 Feb 2020 04:04:03 +0000 (20:04 -0800)]
include/uapi/linux/swab.h: fix userspace breakage, use __BITS_PER_LONG for swap
QEMU has a funny new build error message when I use the upstream kernel
headers:
CC block/file-posix.o
In file included from /home/cborntra/REPOS/qemu/include/qemu/timer.h:4,
from /home/cborntra/REPOS/qemu/include/qemu/timed-average.h:29,
from /home/cborntra/REPOS/qemu/include/block/accounting.h:28,
from /home/cborntra/REPOS/qemu/include/block/block_int.h:27,
from /home/cborntra/REPOS/qemu/block/file-posix.c:30:
/usr/include/linux/swab.h: In function `__swab':
/home/cborntra/REPOS/qemu/include/qemu/bitops.h:20:34: error: "sizeof" is not defined, evaluates to 0 [-Werror=undef]
20 | #define BITS_PER_LONG (sizeof (unsigned long) * BITS_PER_BYTE)
| ^~~~~~
/home/cborntra/REPOS/qemu/include/qemu/bitops.h:20:41: error: missing binary operator before token "("
20 | #define BITS_PER_LONG (sizeof (unsigned long) * BITS_PER_BYTE)
| ^
cc1: all warnings being treated as errors
make: *** [/home/cborntra/REPOS/qemu/rules.mak:69: block/file-posix.o] Error 1
rm tests/qemu-iotests/socket_scm_helper.o
This was triggered by commit
d5767057c9a ("uapi: rename ext2_swab() to
swab() and share globally in swab.h"). That patch is doing
#include <asm/bitsperlong.h>
but it uses BITS_PER_LONG.
The kernel file asm/bitsperlong.h provide only __BITS_PER_LONG.
Let us use the __ variant in swap.h
Link: http://lkml.kernel.org/r/20200213142147.17604-1-borntraeger@de.ibm.com
Fixes: d5767057c9a ("uapi: rename ext2_swab() to swab() and share globally in swab.h")
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: Allison Randal <allison@lohutok.net>
Cc: Joe Perches <joe@perches.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: William Breathitt Gray <vilhelm.gray@gmail.com>
Cc: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ioanna Alifieraki [Fri, 21 Feb 2020 04:04:00 +0000 (20:04 -0800)]
Revert "ipc,sem: remove uneeded sem_undo_list lock usage in exit_sem()"
This reverts commit
a97955844807e327df11aa33869009d14d6b7de0.
Commit
a97955844807 ("ipc,sem: remove uneeded sem_undo_list lock usage
in exit_sem()") removes a lock that is needed. This leads to a process
looping infinitely in exit_sem() and can also lead to a crash. There is
a reproducer available in [1] and with the commit reverted the issue
does not reproduce anymore.
Using the reproducer found in [1] is fairly easy to reach a point where
one of the child processes is looping infinitely in exit_sem between
for(;;) and if (semid == -1) block, while it's trying to free its last
sem_undo structure which has already been freed by freeary().
Each sem_undo struct is on two lists: one per semaphore set (list_id)
and one per process (list_proc). The list_id list tracks undos by
semaphore set, and the list_proc by process.
Undo structures are removed either by freeary() or by exit_sem(). The
freeary function is invoked when the user invokes a syscall to remove a
semaphore set. During this operation freeary() traverses the list_id
associated with the semaphore set and removes the undo structures from
both the list_id and list_proc lists.
For this case, exit_sem() is called at process exit. Each process
contains a struct sem_undo_list (referred to as "ulp") which contains
the head for the list_proc list. When the process exits, exit_sem()
traverses this list to remove each sem_undo struct. As in freeary(),
whenever a sem_undo struct is removed from list_proc, it is also removed
from the list_id list.
Removing elements from list_id is safe for both exit_sem() and freeary()
due to sem_lock(). Removing elements from list_proc is not safe;
freeary() locks &un->ulp->lock when it performs
list_del_rcu(&un->list_proc) but exit_sem() does not (locking was
removed by commit
a97955844807 ("ipc,sem: remove uneeded sem_undo_list
lock usage in exit_sem()").
This can result in the following situation while executing the
reproducer [1] : Consider a child process in exit_sem() and the parent
in freeary() (because of semctl(sid[i], NSEM, IPC_RMID)).
- The list_proc for the child contains the last two undo structs A and
B (the rest have been removed either by exit_sem() or freeary()).
- The semid for A is 1 and semid for B is 2.
- exit_sem() removes A and at the same time freeary() removes B.
- Since A and B have different semid sem_lock() will acquire different
locks for each process and both can proceed.
The bug is that they remove A and B from the same list_proc at the same
time because only freeary() acquires the ulp lock. When exit_sem()
removes A it makes ulp->list_proc.next to point at B and at the same
time freeary() removes B setting B->semid=-1.
At the next iteration of for(;;) loop exit_sem() will try to remove B.
The only way to break from for(;;) is for (&un->list_proc ==
&ulp->list_proc) to be true which is not. Then exit_sem() will check if
B->semid=-1 which is and will continue looping in for(;;) until the
memory for B is reallocated and the value at B->semid is changed.
At that point, exit_sem() will crash attempting to unlink B from the
lists (this can be easily triggered by running the reproducer [1] a
second time).
To prove this scenario instrumentation was added to keep information
about each sem_undo (un) struct that is removed per process and per
semaphore set (sma).
CPU0 CPU1
[caller holds sem_lock(sma for A)] ...
freeary() exit_sem()
... ...
... sem_lock(sma for B)
spin_lock(A->ulp->lock) ...
list_del_rcu(un_A->list_proc) list_del_rcu(un_B->list_proc)
Undo structures A and B have different semid and sem_lock() operations
proceed. However they belong to the same list_proc list and they are
removed at the same time. This results into ulp->list_proc.next
pointing to the address of B which is already removed.
After reverting commit
a97955844807 ("ipc,sem: remove uneeded
sem_undo_list lock usage in exit_sem()") the issue was no longer
reproducible.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=
1694779
Link: http://lkml.kernel.org/r/20191211191318.11860-1-ioanna-maria.alifieraki@canonical.com
Fixes: a97955844807 ("ipc,sem: remove uneeded sem_undo_list lock usage in exit_sem()")
Signed-off-by: Ioanna Alifieraki <ioanna-maria.alifieraki@canonical.com>
Acked-by: Manfred Spraul <manfred@colorfullife.com>
Acked-by: Herton R. Krzesinski <herton@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: <malat@debian.org>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jay Vosburgh <jay.vosburgh@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arnd Bergmann [Fri, 21 Feb 2020 04:03:57 +0000 (20:03 -0800)]
y2038: hide timeval/timespec/itimerval/itimerspec types
There are no in-kernel users remaining, but there may still be users that
include linux/time.h instead of sys/time.h from user space, so leave the
types available to user space while hiding them from kernel space.
Only the __kernel_old_* versions of these types remain now.
Link: http://lkml.kernel.org/r/20200110154232.4104492-4-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arnd Bergmann [Fri, 21 Feb 2020 04:03:54 +0000 (20:03 -0800)]
y2038: remove unused time32 interfaces
No users remain, so kill these off before we grow new ones.
Link: http://lkml.kernel.org/r/20200110154232.4104492-3-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arnd Bergmann [Fri, 21 Feb 2020 04:03:50 +0000 (20:03 -0800)]
y2038: remove ktime to/from timespec/timeval conversion
A couple of helpers are now obsolete and can be removed, so drivers can no
longer start using them and instead use y2038-safe interfaces.
Link: http://lkml.kernel.org/r/20200110154232.4104492-2-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rafael J. Wysocki [Fri, 21 Feb 2020 00:46:18 +0000 (01:46 +0100)]
ACPI: PM: s2idle: Check fixed wakeup events in acpi_s2idle_wake()
Commit
fdde0ff8590b ("ACPI: PM: s2idle: Prevent spurious SCIs from
waking up the system") overlooked the fact that fixed events can wake
up the system too and broke RTC wakeup from suspend-to-idle as a
result.
Fix this issue by checking the fixed events in acpi_s2idle_wake() in
addition to checking wakeup GPEs and break out of the suspend-to-idle
loop if the status bits of any enabled fixed events are set then.
Fixes: fdde0ff8590b ("ACPI: PM: s2idle: Prevent spurious SCIs from waking up the system")
Reported-and-tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Guenter Roeck [Thu, 20 Feb 2020 14:29:48 +0000 (06:29 -0800)]
hwmon: (w83627ehf) Fix crash seen with W83627DHG-P
Loading the driver on a system with W83627DHG-P crashes as follows.
w83627ehf: Found W83627DHG-P chip at 0x290
BUG: kernel NULL pointer dereference, address:
0000000000000000
PGD 0 P4D 0
Oops: 0000 [#1] SMP NOPTI
CPU: 0 PID: 604 Comm: sensors Not tainted
5.6.0-rc2-00055-gca7e1fd1026c #29
Hardware name: /D425KT, BIOS MWPNT10N.86A.0132.2013.0726.1534 07/26/2013
RIP: 0010:w83627ehf_read_string+0x27/0x70 [w83627ehf]
Code: [... ]
RSP: 0018:
ffffb95980657df8 EFLAGS:
00010293
RAX:
0000000000000000 RBX:
ffff96caaa7f5218 RCX:
0000000000000000
RDX:
0000000000000015 RSI:
0000000000000001 RDI:
ffff96caa736ec08
RBP:
0000000000000000 R08:
ffffb95980657e20 R09:
0000000000000001
R10:
ffff96caaa635cc0 R11:
0000000000000000 R12:
ffff96caa9f7cf00
R13:
ffff96caa9ec3d00 R14:
ffff96caa9ec3d28 R15:
ffff96caa9ec3d40
FS:
00007fbc7c4e2740(0000) GS:
ffff96caabc00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000000000000 CR3:
0000000129d58000 CR4:
00000000000006f0
Call Trace:
? cp_new_stat+0x12d/0x160
hwmon_attr_show_string+0x37/0x70 [hwmon]
dev_attr_show+0x14/0x50
sysfs_kf_seq_show+0xb5/0x1b0
seq_read+0xcf/0x460
vfs_read+0x9b/0x150
ksys_read+0x5f/0xe0
do_syscall_64+0x48/0x190
entry_SYSCALL_64_after_hwframe+0x44/0xa9
...
Temperature labels are not always present. Adjust sysfs attribute
visibility accordingly.
Reported-by: Meelis Roos <mroos@linux.ee>
Suggested-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Meelis Roos <mroos@linux.ee>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Fixes: 266cd5835947 ("hwmon: (w83627ehf) convert to with_info interface")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Miaohe Lin [Sat, 4 Jan 2020 08:56:49 +0000 (16:56 +0800)]
KVM: SVM: Fix potential memory leak in svm_cpu_init()
When kmalloc memory for sd->sev_vmcbs failed, we forget to free the page
held by sd->save_area. Also get rid of the var r as '-ENOMEM' is actually
the only possible outcome here.
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Miaohe Lin [Fri, 21 Feb 2020 14:04:46 +0000 (22:04 +0800)]
KVM: apic: avoid calculating pending eoi from an uninitialized val
When pv_eoi_get_user() fails, 'val' may remain uninitialized and the return
value of pv_eoi_get_pending() becomes random. Fix the issue by initializing
the variable.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Vitaly Kuznetsov [Thu, 20 Feb 2020 17:22:04 +0000 (18:22 +0100)]
KVM: nVMX: clear PIN_BASED_POSTED_INTR from nested pinbased_ctls only when apicv is globally disabled
When apicv is disabled on a vCPU (e.g. by enabling KVM_CAP_HYPERV_SYNIC*),
nothing happens to VMX MSRs on the already existing vCPUs, however, all new
ones are created with PIN_BASED_POSTED_INTR filtered out. This is very
confusing and results in the following picture inside the guest:
$ rdmsr -ax 0x48d
ff00000016
7f00000016
7f00000016
7f00000016
This is observed with QEMU and 4-vCPU guest: QEMU creates vCPU0, does
KVM_CAP_HYPERV_SYNIC2 and then creates the remaining three.
L1 hypervisor may only check CPU0's controls to find out what features
are available and it will be very confused later. Switch to setting
PIN_BASED_POSTED_INTR control based on global 'enable_apicv' setting.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Vitaly Kuznetsov [Thu, 20 Feb 2020 17:22:05 +0000 (18:22 +0100)]
KVM: nVMX: handle nested posted interrupts when apicv is disabled for L1
Even when APICv is disabled for L1 it can (and, actually, is) still
available for L2, this means we need to always call
vmx_deliver_nested_posted_interrupt() when attempting an interrupt
delivery.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Suravee Suthikulpanit [Fri, 21 Feb 2020 14:52:17 +0000 (08:52 -0600)]
kvm: x86: svm: Fix NULL pointer dereference when AVIC not enabled
Launching VM w/ AVIC disabled together with pass-through device
results in NULL pointer dereference bug with the following call trace.
RIP: 0010:svm_refresh_apicv_exec_ctrl+0x17e/0x1a0 [kvm_amd]
Call Trace:
kvm_vcpu_update_apicv+0x44/0x60 [kvm]
kvm_arch_vcpu_ioctl_run+0x3f4/0x1c80 [kvm]
kvm_vcpu_ioctl+0x3d8/0x650 [kvm]
do_vfs_ioctl+0xaa/0x660
? tomoyo_file_ioctl+0x19/0x20
ksys_ioctl+0x67/0x90
__x64_sys_ioctl+0x1a/0x20
do_syscall_64+0x57/0x190
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Investigation shows that this is due to the uninitialized usage of
struct vapu_svm.ir_list in the svm_set_pi_irte_mode(), which is
called from svm_refresh_apicv_exec_ctrl().
The ir_list is initialized only if AVIC is enabled. So, fixes by
adding a check if AVIC is enabled in the svm_refresh_apicv_exec_ctrl().
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=206579
Fixes: 8937d762396d ("kvm: x86: svm: Add support to (de)activate posted interrupts.")
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Xiaoyao Li [Sun, 16 Feb 2020 10:48:57 +0000 (18:48 +0800)]
KVM: VMX: Add VMX_FEATURE_USR_WAIT_PAUSE
Commit
159348784ff0 ("x86/vmx: Introduce VMX_FEATURES_*") missed
bit 26 (enable user wait and pause) of Secondary Processor-based
VM-Execution Controls.
Add VMX_FEATURE_USR_WAIT_PAUSE flag so that it shows up in /proc/cpuinfo,
and use it to define SECONDARY_EXEC_ENABLE_USR_WAIT_PAUSE to make them
uniform.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
wanpeng li [Mon, 17 Feb 2020 10:37:43 +0000 (18:37 +0800)]
KVM: nVMX: Hold KVM's srcu lock when syncing vmcs12->shadow
For the duration of mapping eVMCS, it derefences ->memslots without holding
->srcu or ->slots_lock when accessing hv assist page. This patch fixes it by
moving nested_sync_vmcs12_to_shadow to prepare_guest_switch, where the SRCU
is already taken.
It can be reproduced by running kvm's evmcs_test selftest.
=============================
warning: suspicious rcu usage
5.6.0-rc1+ #53 tainted: g w ioe
-----------------------------
./include/linux/kvm_host.h:623 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by evmcs_test/8507:
#0:
ffff9ddd156d00d0 (&vcpu->mutex){+.+.}, at:
kvm_vcpu_ioctl+0x85/0x680 [kvm]
stack backtrace:
cpu: 6 pid: 8507 comm: evmcs_test tainted: g w ioe 5.6.0-rc1+ #53
hardware name: dell inc. optiplex 7040/0jctf8, bios 1.4.9 09/12/2016
call trace:
dump_stack+0x68/0x9b
kvm_read_guest_cached+0x11d/0x150 [kvm]
kvm_hv_get_assist_page+0x33/0x40 [kvm]
nested_enlightened_vmentry+0x2c/0x60 [kvm_intel]
nested_vmx_handle_enlightened_vmptrld.part.52+0x32/0x1c0 [kvm_intel]
nested_sync_vmcs12_to_shadow+0x439/0x680 [kvm_intel]
vmx_vcpu_run+0x67a/0xe60 [kvm_intel]
vcpu_enter_guest+0x35e/0x1bc0 [kvm]
kvm_arch_vcpu_ioctl_run+0x40b/0x670 [kvm]
kvm_vcpu_ioctl+0x370/0x680 [kvm]
ksys_ioctl+0x235/0x850
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x77/0x780
entry_syscall_64_after_hwframe+0x49/0xbe
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Miaohe Lin [Fri, 14 Feb 2020 02:32:38 +0000 (10:32 +0800)]
KVM: x86: don't notify userspace IOAPIC on edge-triggered interrupt EOI
Commit
13db77347db1 ("KVM: x86: don't notify userspace IOAPIC on edge
EOI") said, edge-triggered interrupts don't set a bit in TMR, which means
that IOAPIC isn't notified on EOI. And var level indicates level-triggered
interrupt.
But commit
3159d36ad799 ("KVM: x86: use generic function for MSI parsing")
replace var level with irq.level by mistake. Fix it by changing irq.level
to irq.trig_mode.
Cc: stable@vger.kernel.org
Fixes: 3159d36ad799 ("KVM: x86: use generic function for MSI parsing")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jens Axboe [Fri, 21 Feb 2020 16:18:00 +0000 (09:18 -0700)]
Merge branch 'nvme-5.6-rc3' of git://git.infradead.org/nvme into block-5.6
Pull NVMe fixes from Keith.
* 'nvme-5.6-rc3' of git://git.infradead.org/nvme:
nvme-multipath: Fix memory leak with ana_log_buf
nvme: Fix uninitialized-variable warning
nvme-pci: Use single IRQ vector for old Apple models
nvme/pci: Add sleep quirk for Samsung and Toshiba drives
Stefano Garzarella [Fri, 21 Feb 2020 15:42:16 +0000 (16:42 +0100)]
io_uring: prevent sq_thread from spinning when it should stop
This patch drops 'cur_mm' before calling cond_resched(), to prevent
the sq_thread from spinning even when the user process is finished.
Before this patch, if the user process ended without closing the
io_uring fd, the sq_thread continues to spin until the
'sq_thread_idle' timeout ends.
In the worst case where the 'sq_thread_idle' parameter is bigger than
INT_MAX, the sq_thread will spin forever.
Fixes: 6c271ce2f1d5 ("io_uring: add submission polling")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Filipe Manana [Thu, 20 Feb 2020 13:29:49 +0000 (13:29 +0000)]
Btrfs: fix deadlock during fast fsync when logging prealloc extents beyond eof
While logging the prealloc extents of an inode during a fast fsync we call
btrfs_truncate_inode_items(), through btrfs_log_prealloc_extents(), while
holding a read lock on a leaf of the inode's root (not the log root, the
fs/subvol root), and then that function locks the file range in the inode's
iotree. This can lead to a deadlock when:
* the fsync is ranged
* the file has prealloc extents beyond eof
* writeback for a range different from the fsync range starts
during the fsync
* the size of the file is not sector size aligned
Because when finishing an ordered extent we lock first a file range and
then try to COW the fs/subvol tree to insert an extent item.
The following diagram shows how the deadlock can happen.
CPU 1 CPU 2
btrfs_sync_file()
--> for range [0, 1MiB)
--> inode has a size of
1MiB and has 1 prealloc
extent beyond the
i_size, starting at offset
4MiB
flushes all delalloc for the
range [0MiB, 1MiB) and waits
for the respective ordered
extents to complete
--> before task at CPU 1 locks the
inode, a write into file range
[1MiB, 2MiB + 1KiB) is made
--> i_size is updated to 2MiB + 1KiB
--> writeback is started for that
range, [1MiB, 2MiB + 4KiB)
--> end offset rounded up to
be sector size aligned
btrfs_log_dentry_safe()
btrfs_log_inode_parent()
btrfs_log_inode()
btrfs_log_changed_extents()
btrfs_log_prealloc_extents()
--> does a search on the
inode's root
--> holds a read lock on
leaf X
btrfs_finish_ordered_io()
--> locks range [1MiB, 2MiB + 4KiB)
--> end offset rounded up
to be sector size aligned
--> tries to cow leaf X, through
insert_reserved_file_extent()
--> already locked by the
task at CPU 1
btrfs_truncate_inode_items()
--> gets an i_size of
2MiB + 1KiB, which is
not sector size
aligned
--> tries to lock file
range [2MiB, (u64)-1)
--> the start range
is rounded down
from 2MiB + 1K
to 2MiB to be sector
size aligned
--> but the subrange
[2MiB, 2MiB + 4KiB) is
already locked by
task at CPU 2 which
is waiting to get a
write lock on leaf X
for which we are
holding a read lock
*** deadlock ***
This results in a stack trace like the following, triggered by test case
generic/561 from fstests:
[ 2779.973608] INFO: task kworker/u8:6:247 blocked for more than 120 seconds.
[ 2779.979536] Not tainted 5.6.0-rc2-btrfs-next-53 #1
[ 2779.984503] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 2779.990136] kworker/u8:6 D 0 247 2 0x80004000
[ 2779.990457] Workqueue: btrfs-endio-write btrfs_work_helper [btrfs]
[ 2779.990466] Call Trace:
[ 2779.990491] ? __schedule+0x384/0xa30
[ 2779.990521] schedule+0x33/0xe0
[ 2779.990616] btrfs_tree_read_lock+0x19e/0x2e0 [btrfs]
[ 2779.990632] ? remove_wait_queue+0x60/0x60
[ 2779.990730] btrfs_read_lock_root_node+0x2f/0x40 [btrfs]
[ 2779.990782] btrfs_search_slot+0x510/0x1000 [btrfs]
[ 2779.990869] btrfs_lookup_file_extent+0x4a/0x70 [btrfs]
[ 2779.990944] __btrfs_drop_extents+0x161/0x1060 [btrfs]
[ 2779.990987] ? mark_held_locks+0x6d/0xc0
[ 2779.990994] ? __slab_alloc.isra.49+0x99/0x100
[ 2779.991060] ? insert_reserved_file_extent.constprop.19+0x64/0x300 [btrfs]
[ 2779.991145] insert_reserved_file_extent.constprop.19+0x97/0x300 [btrfs]
[ 2779.991222] ? start_transaction+0xdd/0x5c0 [btrfs]
[ 2779.991291] btrfs_finish_ordered_io+0x4f4/0x840 [btrfs]
[ 2779.991405] btrfs_work_helper+0xaa/0x720 [btrfs]
[ 2779.991432] process_one_work+0x26d/0x6a0
[ 2779.991460] worker_thread+0x4f/0x3e0
[ 2779.991481] ? process_one_work+0x6a0/0x6a0
[ 2779.991489] kthread+0x103/0x140
[ 2779.991499] ? kthread_create_worker_on_cpu+0x70/0x70
[ 2779.991515] ret_from_fork+0x3a/0x50
(...)
[ 2780.026211] INFO: task fsstress:17375 blocked for more than 120 seconds.
[ 2780.027480] Not tainted 5.6.0-rc2-btrfs-next-53 #1
[ 2780.028482] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 2780.030035] fsstress D 0 17375 17373 0x00004000
[ 2780.030038] Call Trace:
[ 2780.030044] ? __schedule+0x384/0xa30
[ 2780.030052] schedule+0x33/0xe0
[ 2780.030075] lock_extent_bits+0x20c/0x320 [btrfs]
[ 2780.030094] ? btrfs_truncate_inode_items+0xf4/0x1150 [btrfs]
[ 2780.030098] ? rcu_read_lock_sched_held+0x59/0xa0
[ 2780.030102] ? remove_wait_queue+0x60/0x60
[ 2780.030122] btrfs_truncate_inode_items+0x133/0x1150 [btrfs]
[ 2780.030151] ? btrfs_set_path_blocking+0xb2/0x160 [btrfs]
[ 2780.030165] ? btrfs_search_slot+0x379/0x1000 [btrfs]
[ 2780.030195] btrfs_log_changed_extents.isra.8+0x841/0x93e [btrfs]
[ 2780.030202] ? do_raw_spin_unlock+0x49/0xc0
[ 2780.030215] ? btrfs_get_num_csums+0x10/0x10 [btrfs]
[ 2780.030239] btrfs_log_inode+0xf83/0x1124 [btrfs]
[ 2780.030251] ? __mutex_unlock_slowpath+0x45/0x2a0
[ 2780.030275] btrfs_log_inode_parent+0x2a0/0xe40 [btrfs]
[ 2780.030282] ? dget_parent+0xa1/0x370
[ 2780.030309] btrfs_log_dentry_safe+0x4a/0x70 [btrfs]
[ 2780.030329] btrfs_sync_file+0x3f3/0x490 [btrfs]
[ 2780.030339] do_fsync+0x38/0x60
[ 2780.030343] __x64_sys_fdatasync+0x13/0x20
[ 2780.030345] do_syscall_64+0x5c/0x280
[ 2780.030348] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 2780.030356] RIP: 0033:0x7f2d80f6d5f0
[ 2780.030361] Code: Bad RIP value.
[ 2780.030362] RSP: 002b:
00007ffdba3c8548 EFLAGS:
00000246 ORIG_RAX:
000000000000004b
[ 2780.030364] RAX:
ffffffffffffffda RBX:
0000000000000003 RCX:
00007f2d80f6d5f0
[ 2780.030365] RDX:
00007ffdba3c84b0 RSI:
00007ffdba3c84b0 RDI:
0000000000000003
[ 2780.030367] RBP:
000000000000004a R08:
0000000000000001 R09:
00007ffdba3c855c
[ 2780.030368] R10:
0000000000000078 R11:
0000000000000246 R12:
00000000000001f4
[ 2780.030369] R13:
0000000051eb851f R14:
00007ffdba3c85f0 R15:
0000557a49220d90
So fix this by making btrfs_truncate_inode_items() not lock the range in
the inode's iotree when the target root is a log root, since it's not
needed to lock the range for log roots as the protection from the inode's
lock and log_mutex are all that's needed.
Fixes: 28553fa992cb28 ("Btrfs: fix race between shrinking truncate and fiemap")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Logan Gunthorpe [Thu, 20 Feb 2020 20:29:53 +0000 (13:29 -0700)]
nvme-multipath: Fix memory leak with ana_log_buf
kmemleak reports a memory leak with the ana_log_buf allocated by
nvme_mpath_init():
unreferenced object 0xffff888120e94000 (size 8208):
comm "nvme", pid 6884, jiffies
4295020435 (age 78786.312s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 ................
01 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<
00000000e2360188>] kmalloc_order+0x97/0xc0
[<
0000000079b18dd4>] kmalloc_order_trace+0x24/0x100
[<
00000000f50c0406>] __kmalloc+0x24c/0x2d0
[<
00000000f31a10b9>] nvme_mpath_init+0x23c/0x2b0
[<
000000005802589e>] nvme_init_identify+0x75f/0x1600
[<
0000000058ef911b>] nvme_loop_configure_admin_queue+0x26d/0x280
[<
00000000673774b9>] nvme_loop_create_ctrl+0x2a7/0x710
[<
00000000f1c7a233>] nvmf_dev_write+0xc66/0x10b9
[<
000000004199f8d0>] __vfs_write+0x50/0xa0
[<
0000000065466fef>] vfs_write+0xf3/0x280
[<
00000000b0db9a8b>] ksys_write+0xc6/0x160
[<
0000000082156b91>] __x64_sys_write+0x43/0x50
[<
00000000c34fbb6d>] do_syscall_64+0x77/0x2f0
[<
00000000bbc574c9>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
nvme_mpath_init() is called by nvme_init_identify() which is called in
multiple places (nvme_reset_work(), nvme_passthru_end(), etc). This
means nvme_mpath_init() may be called multiple times before
nvme_mpath_uninit() (which is only called on nvme_free_ctrl()).
When nvme_mpath_init() is called multiple times, it overwrites the
ana_log_buf pointer with a new allocation, thus leaking the previous
allocation.
To fix this, free ana_log_buf before allocating a new one.
Fixes: 0d0b660f214dc490 ("nvme: add ANA support")
Cc: <stable@vger.kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Zenghui Yu [Fri, 21 Feb 2020 02:07:25 +0000 (10:07 +0800)]
genirq/irqdomain: Make sure all irq domain flags are distinct
This was noticed when printing debugfs for MSIs on my ARM64 server. The
new dstate IRQD_MSI_NOMASK_QUIRK came out surprisingly while it should only
be the x86 stuff for the time being...
The new MSI quirk flag uses the same bit as IRQ_DOMAIN_NAME_ALLOCATED which
is oddly defined as bit 6 for no good reason.
Switch it to the non used bit 1.
Fixes: 6f1a4891a592 ("x86/apic/msi: Plug non-maskable MSI affinity race")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20200221020725.2038-1-yuzenghui@huawei.com
Randy Dunlap [Thu, 20 Feb 2020 01:28:21 +0000 (17:28 -0800)]
zonefs: fix documentation typos etc.
Fix typos, spellos, etc. in zonefs.txt.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Damien Le Moal <Damien.LeMoal@wdc.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Guo Ren [Wed, 12 Feb 2020 02:24:52 +0000 (10:24 +0800)]
csky: Implement copy_thread_tls
This is required for clone3 which passes the TLS value through a
struct rather than a register.
Cc: Amanieu d'Antras <amanieu@gmail.com>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
MaJun [Mon, 27 Jan 2020 02:56:21 +0000 (10:56 +0800)]
csky: Add PCI support
Add the pci related code for csky arch to support basic pci virtual
function, such as qemu virt-pci-9pfs.
Signed-off-by: MaJun <majun258@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Ma Jun [Sun, 2 Feb 2020 09:56:58 +0000 (17:56 +0800)]
csky: Minimize defconfig to support buildroot config.fragment
Some bsp (eg: buildroot) has defconfig.fragment design to add more
configs into the defconfig in linux source code tree. For example,
we could put different cpu configs into different defconfig.fragments,
but they all use the same defconfig in Linux.
Signed-off-by: Ma Jun <majun258@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Guo Ren [Tue, 8 Oct 2019 06:25:13 +0000 (14:25 +0800)]
csky: Add setup_initrd check code
We should give some necessary check for initrd just like other
architectures and it seems that setup_initrd() could be a common
code for all architectures.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Krzysztof Kozlowski [Thu, 30 Jan 2020 19:22:40 +0000 (20:22 +0100)]
csky: Cleanup old Kconfig options
CONFIG_CLKSRC_OF is gone since commit
bb0eb050a577
("clocksource/drivers: Rename CLKSRC_OF to TIMER_OF"). The platform
already selects TIMER_OF.
CONFIG_HAVE_DMA_API_DEBUG is gone since commit
6e88628d03dd ("dma-debug:
remove CONFIG_HAVE_DMA_API_DEBUG").
CONFIG_DEFAULT_DEADLINE is gone since commit
f382fb0bcef4 ("block:
remove legacy IO schedulers").
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Randy Dunlap [Sat, 1 Feb 2020 01:52:30 +0000 (17:52 -0800)]
arch/csky: fix some Kconfig typos
Fix wording in help text for the CPU_HAS_LDSTEX symbol.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Guo Ren [Sun, 2 Feb 2020 06:11:11 +0000 (14:11 +0800)]
csky: Fixup compile warning for three unimplemented syscalls
Implement fstat64, fstatat64, clone3 syscalls to fixup
checksyscalls.sh compile warnings.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Guo Ren [Sun, 2 Feb 2020 02:58:38 +0000 (10:58 +0800)]
csky: Remove unused cache implementation
Only for coding convention, these codes are unnecessary for abiv2.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Guo Ren [Sun, 2 Feb 2020 01:58:42 +0000 (09:58 +0800)]
csky: Fixup ftrace modify panic
During ftrace init, linux will replace all function prologues
(call_mcout) with nops, but it need flush_dcache and
invalidate_icache to make it work. So flush_cache functions
couldn't be nested called by ftrace framework.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Guo Ren [Fri, 31 Jan 2020 12:33:10 +0000 (20:33 +0800)]
csky: Add flush_icache_mm to defer flush icache all
Some CPUs don't support icache.va instruction to maintain the whole
smp cores' icache. Using icache.all + IPI casue a lot on performace
and using defer mechanism could reduce the number of calling icache
_flush_all functions.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
projects / openwrt / staging / blogic.git / log