Johannes Berg [Wed, 29 May 2019 12:25:35 +0000 (15:25 +0300)]
mac80211: use STA info in rate_control_send_low()
Even if we have a station, we currently call rate_control_send_low()
with the NULL station unless further rate control (driver, minstrel)
has been initialized.
Change this so we can use more information about the station to use
a better rate. For example, when we associate with an AP, we will
now use the lowest rate it advertised as supported (that we can)
rather than the lowest mandatory rate. This aligns our behaviour
with most other 802.11 implementations.
To make this possible, we need to also ensure that we have non-zero
rates at all times, so in case we really have *nothing* pre-fill
the supp_rates bitmap with the very lowest mandatory bitmap (11b
and 11a on 2.4 and 5 GHz respectively).
Additionally, hostapd appears to be giving us an empty supported
rates bitmap (it can and should do better, since the STA must have
supported for at least the basic rates in the BSS), so ignore any
such bitmaps that would actually zero out the supp_rates, and in
that case just keep the pre-filled mandatory rates.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg [Thu, 16 May 2019 09:44:52 +0000 (11:44 +0200)]
mac80211: call rate_control_send_low() internally
There's no rate control algorithm that *doesn't* want to call
it internally, and calling it internally will let us modify
its behaviour in the future.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Ilan Peer [Wed, 29 May 2019 12:25:33 +0000 (15:25 +0300)]
ieee80211: Add a missing extended capability flag definition
Add the "OBSS Narrow Bandwidth RU In OFDMA Tolerance Support" flag
definition to the definitions of the flags covered by the Extended
Capability IE.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Ilan Peer [Wed, 29 May 2019 12:25:32 +0000 (15:25 +0300)]
cfg80211: Add a function to iterate all BSS entries
Add a function that iterates over the BSS entries associated with a
given wiphy and calls a callback for each iterated BSS. This can be
used by drivers in various ways, e.g., to evaluate some property for
all the BSSs in the medium.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
John Crispin [Tue, 28 May 2019 11:49:48 +0000 (13:49 +0200)]
mac80211: allow turning TWT responder support on and off via netlink
Allow the userland daemon to en/disable TWT support for an AP.
Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com>
Signed-off-by: John Crispin <john@phrozen.org>
[simplify parsing code]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
John Crispin [Tue, 28 May 2019 11:49:47 +0000 (13:49 +0200)]
mac80211: dynamically enable the TWT requester support on STA interfaces
Turn TWT for STA interfaces when they associate and/or receive a
beacon where the twt_responder bit has changed.
Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg [Tue, 28 May 2019 08:56:03 +0000 (10:56 +0200)]
nl80211: require and validate vendor command policy
Require that each vendor command give a policy of its sub-attributes
in NL80211_ATTR_VENDOR_DATA, and then (stricly) check the contents,
including the NLA_F_NESTED flag that we couldn't check on the outer
layer because there we don't know yet.
It is possible to use VENDOR_CMD_RAW_DATA for raw data, but then no
nested data can be given (NLA_F_NESTED flag must be clear) and the
data is just passed as is to the command.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
John Crispin [Tue, 21 May 2019 15:02:58 +0000 (17:02 +0200)]
mac80211: add ieee80211_get_he_iftype_cap() helper
This function is similar to ieee80211_get_he_sta_cap() but allows passing
the iftype. Also make ieee80211_get_he_sta_cap() use the new helper
rather than duplicating the code.
Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Chung-Hsien Hsu [Thu, 9 May 2019 09:49:06 +0000 (09:49 +0000)]
nl80211: add support for SAE authentication offload
Let drivers advertise support for station-mode SAE authentication
offload with a new NL80211_EXT_FEATURE_SAE_OFFLOAD flag.
Signed-off-by: Chung-Hsien Hsu <stanley.hsu@cypress.com>
Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Chung-Hsien Hsu [Thu, 9 May 2019 09:49:05 +0000 (09:49 +0000)]
nl80211: add WPA3 definition for SAE authentication
Add definition of WPA version 3 for SAE authentication.
Signed-off-by: Chung-Hsien Hsu <stanley.hsu@cypress.com>
Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Chung-Hsien Hsu [Thu, 9 May 2019 09:48:25 +0000 (09:48 +0000)]
nl80211: add NL80211_ATTR_IFINDEX to port authorized event
Add NL80211_ATTR_IFINDEX attribute to port authorized event to indicate
the operating interface of the device. Also put NL80211_ATTR_WIPHY
attribute in it to be consistent with the other MLME notifications.
Signed-off-by: Chung-Hsien Hsu <stanley.hsu@cypress.com>
Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Alexander Wetzel [Mon, 6 May 2019 19:01:48 +0000 (21:01 +0200)]
mac80211: AMPDU handling for Extended Key ID
IEEE 802.11 - 2016 forbids mixing MPDUs with different keyIDs in one
A-MPDU. Drivers supporting A-MPDUs and Extended Key ID must actively
enforce that requirement due to the available two unicast keyIDs.
Allow driver to signal mac80211 that they will not check the keyID in
MPDUs when aggregating them and that they expect mac80211 to stop Tx
aggregation when rekeying a connection using Extended Key ID.
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg [Tue, 28 May 2019 12:18:07 +0000 (14:18 +0200)]
nl80211: fill all policy .type entries
For old commands, it's fine to have .type = NLA_UNSPEC and it
behaves the same as NLA_MIN_LEN. However, for new commands with
strict validation this is no longer true, and for policy export
to userspace these are also ignored.
Fix up the remaining ones that don't have a type.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Chaitanya Tata [Wed, 1 May 2019 12:55:24 +0000 (18:25 +0530)]
cfg80211: Handle bss expiry during connection
If the BSS is expired during connection, the connect result will
trigger a kernel warning. Ideally cfg80211 should hold the BSS
before the connection is attempted, but as the BSSID is not known
in case of auth/assoc MLME offload (connect op) it doesn't.
For those drivers without the connect op cfg80211 holds down the
reference so it wil not be removed from list.
Fix this by removing the warning and silently adding the BSS back to
the bss list which is return by the driver (with proper BSSID set) or
in case the BSS is already added use that.
The requirements for drivers are documented in the API's.
Signed-off-by: Chaitanya Tata <chaitanya.tata@bluwireless.co.uk>
[formatting fixes, keep old timestamp]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Y.b. Lu [Mon, 27 May 2019 03:55:20 +0000 (03:55 +0000)]
enetc: fix le32/le16 degrading to integer warnings
Fix blow sparse warning introduced by a previous patch.
- restricted __le32 degrades to integer
- restricted __le16 degrades to integer
Fixes: d39823121911 ("enetc: add hardware timestamping support")
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Sat, 25 May 2019 19:14:39 +0000 (21:14 +0200)]
r8169: remove support for RTL_GIGA_MAC_VER_01
RTL_GIGA_MAC_VER_01 is RTL8169, the ancestor of the chip family.
It didn't have an internal PHY and I've never seen it in the wild.
What isn't there doesn't need to be maintained, so let's remove
support for it.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Sat, 25 May 2019 18:57:42 +0000 (20:57 +0200)]
r8169: improve RTL8168d PHY initialization
Certain parts of the PHY initialization are the same for sub versions
1 and 2 of RTL8168d. So let's factor this out to simplify the code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 27 May 2019 05:19:39 +0000 (22:19 -0700)]
Merge branch 'r8169-small-improvements'
Heiner Kallweit says:
====================
r8169: small improvements
Series with small improvements.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Sat, 25 May 2019 18:45:04 +0000 (20:45 +0200)]
r8169: change type of member mac_version in rtl8169_private
Use the appropriate enum type for member mac_version. And don't assign
a fixed value to RTL_GIGA_MAC_NONE, there's no benefit in it.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Sat, 25 May 2019 18:44:01 +0000 (20:44 +0200)]
r8169: remove unneeded return statement in rtl_hw_init_8168g
Remove not needed return statement.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Sat, 25 May 2019 18:43:25 +0000 (20:43 +0200)]
r8169: remove rtl_hw_init_8168ep
rtl_hw_init_8168ep() can be removed, this simplifies the code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
YueHaibing [Sat, 25 May 2019 12:45:10 +0000 (20:45 +0800)]
cxgb4: Make t4_get_tp_e2c_map static
Fix sparse warning:
drivers/net/ethernet/chelsio/cxgb4/t4_hw.c:6216:14:
warning: symbol 't4_get_tp_e2c_map' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Fri, 24 May 2019 23:37:07 +0000 (16:37 -0700)]
selftest: Fixes for icmp_redirect test
I was really surprised that the IPv6 mtu exception followed by redirect
test was passing as nothing about the code suggests it should. The problem
is actually with the logic in the test script.
Fix the test cases as follows:
1. add debug function to dump the initial and redirect gateway addresses
for ipv6. This is shown only in verbose mode. It helps verify the
output of 'route get'.
2. fix the check_exception logic for the reset case to make sure that
for IPv4 neither mtu nor redirect appears in the 'route get' output.
For IPv6, make sure mtu is not present and the gateway is the initial
R1 lladdr.
3. fix the reset logic by using a function to delete the routes added by
initial_route_*. This format works better for the nexthop version of
the tests.
While improving the test cases, go ahead and ensure that forwarding is
disabled since IPv6 redirect requires it.
Also, runs with kernel debugging enabled sometimes show a failure with
one of the ipv4 tests, so spread the pings over longer time interval.
The end result is that 2 tests now show failures:
TEST: IPv6: mtu exception plus redirect [FAIL]
and the VRF version.
This is a bug in the IPv6 logic that will need to be fixed
separately. Redirect followed by MTU works because __ip6_rt_update_pmtu
hits the 'if (!rt6_cache_allowed_for_pmtu(rt6))' path and updates the
mtu on the exception rt6_info.
MTU followed by redirect does not have this logic. rt6_do_redirect
creates a new exception and then rt6_insert_exception removes the old
one which has the MTU exception.
Fixes: ec8105352869 ("selftests: Add redirect tests")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Fri, 24 May 2019 21:56:58 +0000 (22:56 +0100)]
ipv4: remove redundant assignment to n
The pointer n is being assigned a value however this value is
never read in the code block and the end of the code block
continues to the next loop iteration. Clean up the code by
removing the redundant assignment.
Fixes: 1bff1a0c9bbda ("ipv4: Add function to send route updates")
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Fri, 24 May 2019 20:24:19 +0000 (22:24 +0200)]
net: phy: bcm87xx: improve bcm87xx_config_init and feature detection
PHY drivers don't have to and shouldn't fiddle with phylib internals.
Most of the code in bcm87xx_config_init() can be removed because
phylib takes care.
In addition I replaced usage of PHY_10GBIT_FEC_FEATURES with an
implementation of the get_features callback. PHY_10GBIT_FEC_FEATURES
is used by this driver only and it's questionable whether there
will be any other PHY supporting this mode only. Having said that
in one of the next kernel versions we may decide to remove it.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 26 May 2019 21:08:05 +0000 (14:08 -0700)]
Merge branch 'inet-frags-avoid-possible-races-at-netns-dismantle'
Eric Dumazet says:
====================
inet: frags: avoid possible races at netns dismantle
This patch series fixes a race happening on netns dismantle with
frag queues. While rhashtable_free_and_destroy() is running,
concurrent timers might run inet_frag_kill() and attempt
rhashtable_remove_fast() calls. This is not allowed by
rhashtable logic.
Since I do not want to add expensive synchronize_rcu() calls
in the netns dismantle path, I had to no longer inline
netns_frags structures, but dynamically allocate them.
The ten first patches make this preparation, so that
the last patch clearly shows the fix.
As this patch series is not exactly trivial, I chose to
target 5.3. We will backport it once soaked a bit.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 24 May 2019 16:03:40 +0000 (09:03 -0700)]
inet: frags: rework rhashtable dismantle
syszbot found an interesting use-after-free [1] happening
while IPv4 fragment rhashtable was destroyed at netns dismantle.
While no insertions can possibly happen at the time a dismantling
netns is destroying this rhashtable, timers can still fire and
attempt to remove elements from this rhashtable.
This is forbidden, since rhashtable_free_and_destroy() has
no synchronization against concurrent inserts and deletes.
Add a new fqdir->dead flag so that timers do not attempt
a rhashtable_remove_fast() operation.
We also have to respect an RCU grace period before starting
the rhashtable_free_and_destroy() from process context,
thus we use rcu_work infrastructure.
This is a refinement of a prior rough attempt to fix this bug :
https://marc.info/?l=linux-netdev&m=
153845936820900&w=2
Since the rhashtable cleanup is now deferred to a work queue,
netns dismantles should be slightly faster.
[1]
BUG: KASAN: use-after-free in __read_once_size include/linux/compiler.h:194 [inline]
BUG: KASAN: use-after-free in rhashtable_last_table+0x162/0x180 lib/rhashtable.c:212
Read of size 8 at addr
ffff8880a6497b70 by task kworker/0:0/5
CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.2.0-rc1+ #2
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events rht_deferred_worker
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x172/0x1f0 lib/dump_stack.c:113
print_address_description.cold+0x7c/0x20d mm/kasan/report.c:188
__kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317
kasan_report+0x12/0x20 mm/kasan/common.c:614
__asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:132
__read_once_size include/linux/compiler.h:194 [inline]
rhashtable_last_table+0x162/0x180 lib/rhashtable.c:212
rht_deferred_worker+0x111/0x2030 lib/rhashtable.c:411
process_one_work+0x989/0x1790 kernel/workqueue.c:2269
worker_thread+0x98/0xe40 kernel/workqueue.c:2415
kthread+0x354/0x420 kernel/kthread.c:255
ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352
Allocated by task 32687:
save_stack+0x23/0x90 mm/kasan/common.c:71
set_track mm/kasan/common.c:79 [inline]
__kasan_kmalloc mm/kasan/common.c:489 [inline]
__kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:462
kasan_kmalloc+0x9/0x10 mm/kasan/common.c:503
__do_kmalloc_node mm/slab.c:3620 [inline]
__kmalloc_node+0x4e/0x70 mm/slab.c:3627
kmalloc_node include/linux/slab.h:590 [inline]
kvmalloc_node+0x68/0x100 mm/util.c:431
kvmalloc include/linux/mm.h:637 [inline]
kvzalloc include/linux/mm.h:645 [inline]
bucket_table_alloc+0x90/0x480 lib/rhashtable.c:178
rhashtable_init+0x3f4/0x7b0 lib/rhashtable.c:1057
inet_frags_init_net include/net/inet_frag.h:109 [inline]
ipv4_frags_init_net+0x182/0x410 net/ipv4/ip_fragment.c:683
ops_init+0xb3/0x410 net/core/net_namespace.c:130
setup_net+0x2d3/0x740 net/core/net_namespace.c:316
copy_net_ns+0x1df/0x340 net/core/net_namespace.c:439
create_new_namespaces+0x400/0x7b0 kernel/nsproxy.c:107
unshare_nsproxy_namespaces+0xc2/0x200 kernel/nsproxy.c:206
ksys_unshare+0x440/0x980 kernel/fork.c:2692
__do_sys_unshare kernel/fork.c:2760 [inline]
__se_sys_unshare kernel/fork.c:2758 [inline]
__x64_sys_unshare+0x31/0x40 kernel/fork.c:2758
do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Freed by task 7:
save_stack+0x23/0x90 mm/kasan/common.c:71
set_track mm/kasan/common.c:79 [inline]
__kasan_slab_free+0x102/0x150 mm/kasan/common.c:451
kasan_slab_free+0xe/0x10 mm/kasan/common.c:459
__cache_free mm/slab.c:3432 [inline]
kfree+0xcf/0x220 mm/slab.c:3755
kvfree+0x61/0x70 mm/util.c:460
bucket_table_free+0x69/0x150 lib/rhashtable.c:108
rhashtable_free_and_destroy+0x165/0x8b0 lib/rhashtable.c:1155
inet_frags_exit_net+0x3d/0x50 net/ipv4/inet_fragment.c:152
ipv4_frags_exit_net+0x73/0x90 net/ipv4/ip_fragment.c:695
ops_exit_list.isra.0+0xaa/0x150 net/core/net_namespace.c:154
cleanup_net+0x3fb/0x960 net/core/net_namespace.c:553
process_one_work+0x989/0x1790 kernel/workqueue.c:2269
worker_thread+0x98/0xe40 kernel/workqueue.c:2415
kthread+0x354/0x420 kernel/kthread.c:255
ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352
The buggy address belongs to the object at
ffff8880a6497b40
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 48 bytes inside of
1024-byte region [
ffff8880a6497b40,
ffff8880a6497f40)
The buggy address belongs to the page:
page:
ffffea0002992580 refcount:1 mapcount:0 mapping:
ffff8880aa400ac0 index:0xffff8880a64964c0 compound_mapcount: 0
flags: 0x1fffc0000010200(slab|head)
raw:
01fffc0000010200 ffffea0002916e88 ffffea000218fe08 ffff8880aa400ac0
raw:
ffff8880a64964c0 ffff8880a6496040 0000000100000005 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8880a6497a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8880a6497a80: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
>
ffff8880a6497b00: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
^
ffff8880a6497b80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8880a6497c00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
Fixes: 648700f76b03 ("inet: frags: use rhashtables for reassembly units")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 24 May 2019 16:03:39 +0000 (09:03 -0700)]
net: dynamically allocate fqdir structures
Following patch will add rcu grace period before fqdir
rhashtable destruction, so we need to dynamically allocate
fqdir structures to not force expensive synchronize_rcu() calls
in netns dismantle path.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 24 May 2019 16:03:38 +0000 (09:03 -0700)]
net: add a net pointer to struct fqdir
fqdir will soon be dynamically allocated.
We need to reach the struct net pointer from fqdir,
so add it, and replace the various container_of() constructs
by direct access to the new field.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 24 May 2019 16:03:37 +0000 (09:03 -0700)]
net: rename inet_frags_init_net() to fdir_init()
And pass an extra parameter, since we will soon
dynamically allocate fqdir structures.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 24 May 2019 16:03:36 +0000 (09:03 -0700)]
ieee820154: 6lowpan: no longer reference init_net in lowpan_frags_ns_ctl_table
(struct net *)->ieee802154_lowpan.fqdir will soon be a pointer, so make
sure lowpan_frags_ns_ctl_table[] does not reference init_net.
lowpan_frags_ns_sysctl_register() can perform the needed initialization
for all netns.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 24 May 2019 16:03:35 +0000 (09:03 -0700)]
netfilter: ipv6: nf_defrag: no longer reference init_net in nf_ct_frag6_sysctl_table
(struct net *)->nf_frag.fqdir will soon be a pointer, so make
sure nf_ct_frag6_sysctl_table[] does not reference init_net.
nf_ct_frag6_sysctl_register() can perform the needed initialization
for all netns.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 24 May 2019 16:03:34 +0000 (09:03 -0700)]
ipv6: no longer reference init_net in ip6_frags_ns_ctl_table[]
(struct net *)->ipv6.fqdir will soon be a pointer, so make
sure ip6_frags_ns_ctl_table[] does not reference init_net.
ip6_frags_ns_ctl_register() can perform the needed initialization
for all netns.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 24 May 2019 16:03:33 +0000 (09:03 -0700)]
ipv4: no longer reference init_net in ip4_frags_ns_ctl_table[]
(struct net *)->ipv4.fqdir will soon be a pointer, so make
sure ip4_frags_ns_ctl_table[] does not reference init_net.
ip4_frags_ns_ctl_register() can perform the needed initialization
for all netns.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 24 May 2019 16:03:32 +0000 (09:03 -0700)]
net: rename struct fqdir fields
Rename the @frags fields from structs netns_ipv4, netns_ipv6,
netns_nf_frag and netns_ieee802154_lowpan to @fqdir
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 24 May 2019 16:03:31 +0000 (09:03 -0700)]
net: rename inet_frags_exit_net() to fqdir_exit()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 24 May 2019 16:03:30 +0000 (09:03 -0700)]
inet: rename netns_frags to fqdir
1) struct netns_frags is renamed to struct fqdir
This structure is really holding many frag queues in a hash table.
2) (struct inet_frag_queue)->net field is renamed to fqdir
since net is generally associated to a 'struct net' pointer
in networking stack.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marek Vasut [Fri, 24 May 2019 14:22:28 +0000 (16:22 +0200)]
net: phy: tja11xx: Add TJA11xx PHY driver
Add driver for the NXP TJA1100 and TJA1101 PHYs. These PHYs are special
BroadRReach 100BaseT1 PHYs used in automotive.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: linux-hwmon@vger.kernel.org
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 26 May 2019 20:24:56 +0000 (13:24 -0700)]
Merge branch 'net-hns3-add-aRFS-feature-and-fix-FEC-bugs-for-HNS3-driver'
Huazhong Tan says:
====================
net: hns3: add aRFS feature and fix FEC bugs for HNS3 driver
This patchset adds some new features support and fixes some bugs:
[Patch 1/4 - 3/4] adds support for aRFS
[Patch 4/4] fix FEC configuration issue
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jian Shen [Fri, 24 May 2019 11:19:48 +0000 (19:19 +0800)]
net: hns3: fix for FEC configuration
The FEC capbility may be changed with port speed changes. Driver
needs to read the active FEC mode, and update FEC capability
when port speed changes.
Fixes: 7e6ec9148a1d ("net: hns3: add support for FEC encoding control")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jian Shen [Fri, 24 May 2019 11:19:47 +0000 (19:19 +0800)]
net: hns3: add aRFS support for PF
This patch adds aRFS support for PF. The aRFS rules are also
stored in the hardware flow director table, Use the existing
filter management functions to insert TCPv4/UDPv4/TCPv6/UDPv6
flow director filters. To avoid rule conflict, once user adds
flow director rules with ethtool, the aRFS will be disabled,
and clear exist aRFS rules. Once all user configure rules were
removed, aRFS can work again.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jian Shen [Fri, 24 May 2019 11:19:46 +0000 (19:19 +0800)]
net: hns3: refine the flow director handle
In order to be compatible with aRFS rules, this patch adds
spin_lock for flow director rule adding, deleting, querying,
and packages the rule configuration.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jian Shen [Fri, 24 May 2019 11:19:45 +0000 (19:19 +0800)]
net: hns3: initialize CPU reverse mapping
Allocate CPU rmap and add entry for each irq. CPU rmap is
used in aRFS to get the queue number of the rx completion
interrupts.
In additional, remove the calling of
irq_set_affinity_notifier() in hns3_nic_init_irq(), because
we have registered notifier in irq_cpu_rmap_add() for each
vector, otherwise it may cause use-after-free issue.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 26 May 2019 20:22:50 +0000 (13:22 -0700)]
Merge branch 'ath79-add-ag71xx-support'
Oleksij Rempel says:
====================
MIPS: ath79: add ag71xx support
2019.05.24 v6:
- ag71xx: remove double union
- ag71xx: reverse Christmas tree for all functions
- ag71xx: add Reviewed-by: Andrew Lunn <andrew@lunn.ch>
2019.05.20 v5:
- ag71xx: remove MII_CMD_WRITE, the name is confusing. It is
actually disables MII_CMD_READ.
- ag71xx: rework ag71xx_mdio_mii_read/write
- ag71xx: set proper mask for the addr in ag71xx_mdio_mii_read/write
- Kconfig: remove MDIO_BITBANG
- ag71xx: ./scripts/checkpatch.pl it.
2019.05.19 v4:
- DT: define eth and mdio clocks
- ag71xx: remove module parameters
- ag71xx: return proper error value on mdio_read/write
- ag71xx: use proper mdio clock registration
- ag71xx: add ag71xx_dma_wait_stop() for ag71xx_dma_reset()
- ag71xx: remove ag71xx_speed_str()
- ag71xx: use phydev->link/sped/duplex instead of ag-> variants
- ag71xx: use WARN() instead of BUG()
- ag71xx: drop big part of ag71xx_phy_link_adjust()
- ag71xx: drop most of ag71xx_do_ioctl()
- ag71xx: register eth clock
- ag71xx: remove AG71XX_ETH0_NO_MDIO quirk.
2019.04.22 v3:
- ag71xx: use phy_modes() instead of ag71xx_get_phy_if_mode_name()
- ag71xx: remove .ndo_poll_controller support
- ag71xx: unregister_netdev before disconnecting phy.
2019.04.18 v2:
- ag71xx: add list of openwrt authors
- ag71xx: remove redundant PHY_POLL assignment
- ag71xx: use phy_attached_info instead of netif_info
- ag71xx: remove redundant netif_carrier_off() on .stop.
- DT: use "ethernet" instead of "eth"
This patch series provide ethernet support for many Atheros/QCA
MIPS based SoCs.
I reworked ag71xx driver which was previously maintained within OpenWRT
repository. So far, following changes was made to make upstreaming
easier:
- everything what can be some how used in user space was removed. Most
of it was debug functionality.
- most of deficetree bindings was removed. Not every thing made sense
and most of it is SoC specific, so it is possible to detect it by
compatible.
- mac and mdio parts are merged in to one driver. It makes easier to
maintaine SoC specific quirks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Oleksij Rempel [Fri, 24 May 2019 11:12:24 +0000 (13:12 +0200)]
net: ethernet: add ag71xx driver
Add support for Atheros/QCA AR7XXX/AR9XXX/QCA95XX built-in ethernet mac support
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Oleksij Rempel [Fri, 24 May 2019 11:12:23 +0000 (13:12 +0200)]
MIPS: ath79: ar9331: add Ethernet nodes
Add ethernet nodes supported by ag71xx driver.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Oleksij Rempel [Fri, 24 May 2019 11:12:22 +0000 (13:12 +0200)]
dt-bindings: net: add qca,ar71xx.txt documentation
Add binding documentation for Atheros/QCA networking IP core used
in many routers.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 26 May 2019 20:04:12 +0000 (13:04 -0700)]
Merge branch 'qed-Improve-performance-on-100G-link-for-offload-protocols'
Michal Kalderon says:
====================
qed*: Improve performance on 100G link for offload protocols
This patch series modifies the current implementation of PF selection.
The refactoring of the llh code enables setting additional filters
(mac / protocol) per PF, and improves performance for offload protocols
(RoCE, iWARP, iSCSI, fcoe) on 100G link (was capped at 90G per single
PF).
Improved performance on 100G link is achieved by configuring engine
affinty to each PF.
The engine affinity is read from the Management FW and hw is configured accordingly.
A new hw resource called PPFID is exposed and an API is introduced to utilize
it. This additional resource enables setting the affinity of a PF and providing
more classification rules per PF.
qedr,qedi,qedf are also modified as part of the series. Without the
changes functionality is broken.
v1 --> v2
---------
- Remove iWARP module parameter. Instead use devlink param infrastructure
for setting the iwarp_cmt mode. Additional patch added to the series for
adding the devlink support.
- Fix kbuild test robot warning on qed_llh_filter initialization.
- Remove comments inside function calls
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Chad Dupuis [Sun, 26 May 2019 12:22:30 +0000 (15:22 +0300)]
qedf: Use hwfns and affin_hwfn_idx to get MSI-X vector index to use
MSI-X vector index is determined using qed device information and
affinity to use.
Signed-off-by: Chad Dupuis <cdupuis@marvell.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Manish Rangankar [Sun, 26 May 2019 12:22:29 +0000 (15:22 +0300)]
qedi: Use hwfns and affin_hwfn_idx to get MSI-X vector index
MSI-X vector index is determined using qed device information and
affinity to use.
Signed-off-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Manish Rangankar [Sun, 26 May 2019 12:22:28 +0000 (15:22 +0300)]
Revert "scsi: qedi: Allocate IRQs based on msix_cnt"
Always request for number of irqs equals to number of queues.
This reverts commit
1a291bce5eaf5374627d337157544aa6499ce34a.
Signed-off-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Kalderon [Sun, 26 May 2019 12:22:27 +0000 (15:22 +0300)]
qed*: Add iWARP 100g support
Add iWARP engine affinity setting for supporting iWARP over 100g.
iWARP cannot be distinguished by the LLH from L2, hence the
engine division will affect L2 as well. For this reason we add
a parameter to devlink to determine the engine division.
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Kalderon [Sun, 26 May 2019 12:22:26 +0000 (15:22 +0300)]
qed: Add qed devlink parameters table
The table currently contains a single parameter for
configuring whether iWARP should be enabled on a 100g
device. Enabling iWARP on a 100g device impacts L2
performance and is therefore not enabled by default.
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Kalderon [Sun, 26 May 2019 12:22:25 +0000 (15:22 +0300)]
qed: Set the doorbell address correctly
In 100g mode the doorbell bar is united for both engines. Set
the correct offset in the hwfn so that the doorbell returned
for RoCE is in the affined hwfn.
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Denis Bolotin <denis.bolotin@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Kalderon [Sun, 26 May 2019 12:22:24 +0000 (15:22 +0300)]
qedr: Change the MSI-X vectors selection to be based on affined engine
Use the msix vectors of the affined hwfn and not the
leading one.
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Kalderon [Sun, 26 May 2019 12:22:23 +0000 (15:22 +0300)]
qed: Modify offload protocols to use the affined engine
To enable 100g support for offload protocols each PF gets
a dedicated engine to work on from the MFW.
This patch modifies the code to use the affined hwfn instead
of the leading one.
The offload protocols require the ll2 to be opened on both
engines, and not just the affined hwfn.
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Kalderon [Sun, 26 May 2019 12:22:22 +0000 (15:22 +0300)]
qed*: Change hwfn used for sb initialization
When initializing status blocks use the affined hwfn
instead of the leading one for RDMA / Storage
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Kalderon [Sun, 26 May 2019 12:22:21 +0000 (15:22 +0300)]
qed: Add llh ppfid interface and 100g support for offload protocols
This patch refactors the current llh implementation. It exposes a hw
resource called ppfid (port-pfid) and implements an API for configuring
the resource. Default configuration which was used until now limited
the number of filters per PF and did not support engine affinity per
protocol. The new API enables allocating more filter rules per PF and
enables affinitizing protocol packets to a certain engine which
enables full 100g protocol offload support.
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Kalderon [Sun, 26 May 2019 12:22:20 +0000 (15:22 +0300)]
qed: Modify api for performing a dmae to another PF
This patch modifies the dmae API to enable performing a dmae operation
to another PF. This enables sharing between the llh entries between PFs
and thus increasing the amount of filters per PF under certain
configurations.
The llh entries require using the dmae since the memory is widebus,
which requires atomicity in access.
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 25 May 2019 23:38:16 +0000 (16:38 -0700)]
Merge branch 'net-mvpp2-Classifier-updates-RSS'
Maxime Chevallier says:
====================
net: mvpp2: Classifier updates, RSS
Here is a set of updates for the PPv2 classifier, the main feature being
the support for steering to RSS contexts, to leverage all the available
RSS tables in the controller.
The first two patches are non-critical fixes for the classifier, the
first one prevents us from allocating too much room to store the
classification rules, the second one configuring the C2 engine as
suggested by the PPv2 functionnal specs.
Patches 3 to 5 introduce support for RSS contexts in mvpp2, allowing us
to steer traffic to dedicated RSS tables.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Maxime Chevallier [Fri, 24 May 2019 10:05:54 +0000 (12:05 +0200)]
net: mvpp2: cls: Support steering to RSS contexts
When steering to an RXQ, we can perform an extra RSS step to assign a
queue from an RSS table.
This is done by setting the RSS_EN attribute in the C2 engine. In that
case, the RXQ that is assigned is the global RSS context id, that is
then translated to an RSS table using the RXQ2RSS table.
An example using ethtool to steer to RXQ 2 and 3 would be :
ethtool -X eth0 weight 0 0 1 1 context new
(This would print the allocated context id, let's say it's 1)
ethtool -N eth0 flow-type udp4 dst-port 1234 context 1 loc 0
The hash parameters are the ones that are globally configured for RSS :
ethtool -N eth0 rx-flow-hash udp4 sdfn
When an RSS context is removed while there are active classification
rules using this context, these rules are removed.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Maxime Chevallier [Fri, 24 May 2019 10:05:53 +0000 (12:05 +0200)]
net: mvpp2: cls: Extract the RSS context when parsing the ethtool rule
ethtool_rx_flow_rule_create takes into parameter the ethtool flow spec,
which doesn't contain the rss context id. We therefore need to extract
it ourself before parsing the ethtool rule.
The FLOW_RSS flag is only set in info->fs.flow_type, and not
info->flow_type.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Maxime Chevallier [Fri, 24 May 2019 10:05:52 +0000 (12:05 +0200)]
net: mvpp2: cls: Use RSS contexts to handle RSS tables
The PPv2 controller has 8 RSS tables that are shared across all ports on
a given PPv2 instance. The previous implementation allocated one table
per port, leaving others unused.
By using RSS contexts, we can make use of multiple RSS tables per
port, one being the default table (always id 0), the other ones being
used as destinations for flow steering, in the same way as rx rings.
This commit introduces RSS contexts management in the PPv2 driver. We
always reserve one table per port, allocated when the port is probed.
The global table list is stored in the struct mvpp2, as it's a global
resource. Each port then maintains a list of indices in that global
table, that way each port can have it's own numbering scheme starting
from 0.
One limitation that seems unavoidable is that the hashing parameters are
shared across all RSS contexts for a given port. Hashing parameters for
ctx 0 will be applied to all contexts.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Maxime Chevallier [Fri, 24 May 2019 10:05:51 +0000 (12:05 +0200)]
net: mvpp2: cls: Bypass C2 internals FIFOs at init
The C2 TCAM has internal FIFOs that are only useful for the built-in
self-tests. Disable these FIFOS at init, as recommended in the
functionnal specs.
Suggested-by: Alan Winkowski <walan@marvell.com>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Maxime Chevallier [Fri, 24 May 2019 10:05:50 +0000 (12:05 +0200)]
net: mvpp2: cls: Use the correct number of rules in various places
As of today, the classification offload implementation only supports 4
different rules to be offloaded. This number has been hardcoded in the
rule insertion function, and the wrong define is being used elsewhere.
Use the correct #define everywhere to make sure we always check for the
correct number of rules.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Gustavo A. R. Silva [Thu, 23 May 2019 22:56:53 +0000 (17:56 -0500)]
flow_offload: use struct_size() in kzalloc()
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct foo {
int stuff;
struct boo entry[];
};
instance = kzalloc(sizeof(struct foo) + count * sizeof(struct boo), GFP_KERNEL);
Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:
instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL);
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 24 May 2019 20:45:57 +0000 (13:45 -0700)]
Merge branch 'net-stmmac-Improvements-and-Selftests'
Jose Abreu says:
====================
net: stmmac: Improvements and Selftests
[ Thanks to the introducion of selftests this series ended up being a misc
of improvements and the selftests additions per-se. ]
This introduces selftests support in stmmac driver. We add 9 basic sanity
checks and MAC loopback support for all cores within the driver. This way
more tests can easily be added in the future and can be run in virtually
any MAC/GMAC/QoS/XGMAC platform.
Having this we can find regressions and missing features in the driver
while at the same time we can check if the IP is correctly working.
We have been using this for some time now and I do have more tests to
submit in the feature. My experience is that although writing the tests
adds more development time, the gain results are obvious.
I let this feature optional within the driver under a Kconfig option.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Fri, 24 May 2019 08:20:26 +0000 (10:20 +0200)]
net: stmmac: Prevent missing interrupts when running NAPI
When we trigger NAPI we are disabling interrupts but in case we receive
or send a packet in the meantime, as interrupts are disabled, we will
miss this event.
Trigger both NAPI instances (RX and TX) when at least one event happens
so that we don't miss any interrupts.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Fri, 24 May 2019 08:20:25 +0000 (10:20 +0200)]
net: stmmac: dwmac4/5: Clear unused address entries
In case we don't use a given address entry we need to clear it because
it could contain previous values that are no longer valid.
Found out while running stmmac selftests.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Fri, 24 May 2019 08:20:24 +0000 (10:20 +0200)]
net: stmmac: dwxgmac2: Do not disable whole RX in dma_stop_rx()
We don't need to disable the whole RX when dma_stop_rx() is called
because there may be the need of just disabling 1 DMA channel.
This is also needed for stmmac Flow Control selftest.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Fri, 24 May 2019 08:20:23 +0000 (10:20 +0200)]
net: stmmac: dwmac4/5: Do not disable whole RX in dma_stop_rx()
We don't need to disable the whole RX when dma_stop_rx() is called
because there may be the need of just disabling 1 DMA channel.
This is also needed for stmmac Flow Control selftest.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Fri, 24 May 2019 08:20:22 +0000 (10:20 +0200)]
net: stmmac: dwmac4/5: Fix Hash Filter
In order for hash filter to work we need to set the HPF bit.
Fout out while running stmmac selftests
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Fri, 24 May 2019 08:20:21 +0000 (10:20 +0200)]
net: stmmac: dwmac1000: Clear unused address entries
In case we don't use a given address entry we need to clear it because
it could contain previous values that are no longer valid.
Found out while running stmmac selftests.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Fri, 24 May 2019 08:20:20 +0000 (10:20 +0200)]
net: stmmac: dwmac1000: Fix Hash Filter
In order for hash filter to work we need to set the HPF bit.
Found out while running stmmac selftests.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Fri, 24 May 2019 08:20:19 +0000 (10:20 +0200)]
net: stmmac: Introduce selftests support
We add support for selftests on stmmac driver with 9 basic sanity checks
for now:
- MAC Loopback
- PHY Loopback
- MMC Counters
- EEE
- Hash Filter Multicast
- Perfect Filter Unicast
- Multicast Filter All
- Unicast Filter All
- Flow Control
This allows for fast tracking of regressions in the driver and helps in
spotting mis-configuration of HW.
Changes from v1:
- Fix build error as module (David)
- Check for link status before running tests
Changes from RFC v2:
- Return proper error code in stmmac_test_mmc (Corentin)
- Use only 1 MMC counter in stmmac_test_mmc (Alexandre)
Changes from RFC v1:
- Change test_loopback to test_mac_loopback (Andrew)
- Change timeout to retries (Andrew)
- Add MC/UC filter tests (Andrew)
- Only test in offline mode (Andrew)
- Do not call phy_loopback twice (Alexandre)
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Corentin Labbe <clabbe.montjoie@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Fri, 24 May 2019 08:20:18 +0000 (10:20 +0200)]
net: stmmac: dwxgmac2: Also pass control frames while in promisc mode
In order for the selftests to run the Flow Control selftest we need to
also pass pause frames to the stack.
Pass this type of frames while in promiscuous mode.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Fri, 24 May 2019 08:20:17 +0000 (10:20 +0200)]
net: stmmac: dwmac4/5: Also pass control frames while in promisc mode
In order for the selftests to run the Flow Control selftest we need to
also pass pause frames to the stack.
Pass this type of frames while in promiscuous mode.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Fri, 24 May 2019 08:20:16 +0000 (10:20 +0200)]
net: stmmac: dwmac1000: Also pass control frames while in promisc mode
In order for the selftests to run the Flow Control selftest we need to
also pass pause frames to the stack.
Pass this type of frames while in promiscuous mode.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Fri, 24 May 2019 08:20:15 +0000 (10:20 +0200)]
net: stmmac: Switch MMC functions to HWIF callbacks
XGMAC has a different MMC module. Lets use HWIF callbacks for MMC module
so that correct callbacks are automatically selected.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Corentin Labbe [Fri, 24 May 2019 08:20:14 +0000 (10:20 +0200)]
net: ethernet: stmmac: dwmac-sun8i: Enable control of loopback
This patch enable use of set_mac_loopback in dwmac-sun8i
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Fri, 24 May 2019 08:20:13 +0000 (10:20 +0200)]
net: stmmac: dwxgmac2: Add MAC loopback support
In preparation for the addition of stmmac selftests we implement the MAC
loopback callback in dwxgmac2 core.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Fri, 24 May 2019 08:20:12 +0000 (10:20 +0200)]
net: stmmac: dwmac4/5: Add MAC loopback support
In preparation for the addition of stmmac selftests we implement the MAC
loopback callback in dwmac4/5 cores.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Fri, 24 May 2019 08:20:11 +0000 (10:20 +0200)]
net: stmmac: dwmac1000: Add MAC loopback support
In preparation for the addition of stmmac selftests we implement the MAC
loopback callback in dwmac1000 core.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Fri, 24 May 2019 08:20:10 +0000 (10:20 +0200)]
net: stmmac: dwmac100: Add MAC loopback support
In preparation for the addition of stmmac selftests we implement the MAC
loopback callback in dwmac100 core.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Fri, 24 May 2019 08:20:09 +0000 (10:20 +0200)]
net: stmmac: Add MAC loopback callback to HWIF
In preparation for the addition of selftests support for stmmac we add a
new callback to HWIF that can be used to set the controller in loopback
mode.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 24 May 2019 20:39:34 +0000 (13:39 -0700)]
Merge branch 'net-phy-add-interface-mode-PHY_INTERFACE_MODE_USXGMII'
Heiner Kallweit says:
====================
net: phy: add interface mode PHY_INTERFACE_MODE_USXGMII
Add support for interface mode USXGMII.
On Freescale boards LS1043A and LS1046A a warning may pop up now
because mode xgmii should be changed to usxgmii (as the used
Aquantia PHY doesn't support XGMII).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Thu, 23 May 2019 18:09:08 +0000 (20:09 +0200)]
net: phy: aquantia: add USXGMII support and warn if XGMII mode is set
So far we didn't support mode USXGMII, and in order to not break few
boards mode XGMII was accepted for the AQR107 family even though it
doesn't support XGMII. Add USXGMII support to the Aquantia PHY driver
and warn if XGMII mode is set.
v2:
- add warning if XGMII mode is set
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Thu, 23 May 2019 18:07:56 +0000 (20:07 +0200)]
dt-bindings: net: document new usxgmii phy mode
Add new interface mode USXGMII to binding documentation.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Thu, 23 May 2019 18:06:49 +0000 (20:06 +0200)]
net: phy: add interface mode PHY_INTERFACE_MODE_USXGMII
Add support for interface mode PHY_INTERFACE_MODE_USXGMII.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn [Thu, 23 May 2019 17:48:46 +0000 (13:48 -0400)]
selftests/net: SO_TXTIME with ETF and FQ
The SO_TXTIME API enables packet tranmission with delayed delivery.
This is currently supported by the ETF and FQ packet schedulers.
Evaluate the interface with both schedulers. Install the scheduler
and send a variety of packets streams: without delay, with one
delayed packet, with multiple ordered delays and with reordering.
Verify that packets are released by the scheduler in expected order.
The ETF qdisc requires a timestamp in the future on every packet. It
needs a delay on the qdisc else the packet is dropped on dequeue for
having a delivery time in the past. The test value is experimentally
derived. ETF requires clock_id CLOCK_TAI. It checks this base and
drops for non-conformance.
The FQ qdisc expects clock_id CLOCK_MONOTONIC, the base used by TCP
as of commit
fb420d5d91c1 ("tcp/fq: move back to CLOCK_MONOTONIC").
Within a flow there is an expecation of ordered delivery, as shown by
delivery times of test 4. The FQ qdisc does not require all packets to
have timestamps and does not drop for non-conformance.
The large (msec) delays are chosen to avoid flakiness.
Output:
SO_TXTIME ipv6 clock monotonic
payload:a delay:28 expected:0 (us)
SO_TXTIME ipv4 clock monotonic
payload:a delay:38 expected:0 (us)
SO_TXTIME ipv6 clock monotonic
payload:a delay:40 expected:0 (us)
SO_TXTIME ipv4 clock monotonic
payload:a delay:33 expected:0 (us)
SO_TXTIME ipv6 clock monotonic
payload:a delay:10120 expected:10000 (us)
SO_TXTIME ipv4 clock monotonic
payload:a delay:10102 expected:10000 (us)
[.. etc ..]
OK. All tests passed
Changes v1->v2: update commit message output
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 24 May 2019 20:26:44 +0000 (13:26 -0700)]
Merge branch 'ipv6-Move-exceptions-to-fib6_nh-and-make-it-optional-in-a-fib6_info'
David Ahern says:
====================
ipv6: Move exceptions to fib6_nh and make it optional in a fib6_info
Patches 1 and 4 move pcpu and exception caches from fib6_info to fib6_nh.
With respect to the current FIB entries this is only a movement from one
struct to another contained within the first.
Patch 2 refactors the core logic of fib6_drop_pcpu_from into a helper
that is invoked per fib6_nh.
Patch 3 refactors exception handling in a similar way - creating a bunch
of helpers that can be invoked per fib6_nh with the goal of making patch
4 easier to review as well as creating the code needed for nexthop
objects.
Patch 5 makes a fib6_nh at the end of a fib6_info an array similar to
IPv4 and its fib_info. For the current fib entry model, all fib6_info
will have a fib6_nh allocated for it.
Patch 6 refactors ip6_route_del moving the code for deleting an
exception entry into a new function.
Patch 7 adds tests for redirect route exceptions. The new test was
written against 5.1 (before any of the nexthop refactoring). It and the
pmtu.sh selftest exercise the exception code paths - from creating
exceptions to cleaning them up on device delete. All tests pass without
any rcu locking or memleak warnings.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Thu, 23 May 2019 03:28:01 +0000 (20:28 -0700)]
selftests: Add redirect tests
Add test for ICMP redirects and exception processing. Test is setup
for later addition of tests using nexthop objects for routing.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Thu, 23 May 2019 03:28:00 +0000 (20:28 -0700)]
ipv6: Refactor ip6_route_del for cached routes
Move the removal of cached routes to a helper, ip6_del_cached_rt, that
can be invoked per nexthop. Rename the existig ip6_del_cached_rt to
__ip6_del_cached_rt since it is called by ip6_del_cached_rt.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Thu, 23 May 2019 03:27:59 +0000 (20:27 -0700)]
ipv6: Make fib6_nh optional at the end of fib6_info
Move fib6_nh to the end of fib6_info and make it an array of
size 0. Pass a flag to fib6_info_alloc indicating if the
allocation needs to add space for a fib6_nh.
The current code path always has a fib6_nh allocated with a
fib6_info; with nexthop objects they will be separate.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Thu, 23 May 2019 03:27:58 +0000 (20:27 -0700)]
ipv6: Move exception bucket to fib6_nh
Similar to the pcpu routes exceptions are really per nexthop, so move
rt6i_exception_bucket from fib6_info to fib6_nh.
To avoid additional increases to the size of fib6_nh for a 1-bit flag,
use the lowest bit in the allocated memory pointer for the flushed flag.
Add helpers for retrieving the bucket pointer to mask off the flag.
The cleanup of the exception bucket is moved to fib6_nh_release.
fib6_nh_flush_exceptions can now be called from 2 contexts:
1. deleting a fib entry
2. deleting a fib6_nh
For 1., fib6_nh_flush_exceptions is called for a specific fib6_info that
is getting deleted. All exceptions in the cache using the entry are
deleted. For 2, the fib6_nh itself is getting destroyed so
fib6_nh_flush_exceptions is called for a NULL fib6_info which means
flush all entries.
The pmtu.sh selftest exercises the affected code paths - from creating
exceptions to cleaning them up on device delete. All tests pass without
any rcu locking or memleak warnings.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Thu, 23 May 2019 03:27:57 +0000 (20:27 -0700)]
ipv6: Refactor exception functions
Before moving exception bucket from fib6_info to fib6_nh, refactor
rt6_flush_exceptions, rt6_remove_exception_rt, rt6_mtu_change_route,
and rt6_update_exception_stamp_rt. In all 3 cases, move the primary
logic into a new helper that starts with fib6_nh_. The latter 3
functions still take a fib6_info; this will be changed to fib6_nh
in the next patch.
In the case of rt6_mtu_change_route, move the fib6_metric_locked
out as a standalone check - no need to call the new function if
the fib entry has the mtu locked. Also, add fib6_info to
rt6_mtu_change_arg as a way of passing the fib entry to the new
helper.
No functional change intended. The goal here is to make the next
patch easier to review by moving existing lookup logic for each to
new helpers.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Thu, 23 May 2019 03:27:56 +0000 (20:27 -0700)]
ipv6: Refactor fib6_drop_pcpu_from
Move the existing pcpu walk in fib6_drop_pcpu_from to a new
helper, __fib6_drop_pcpu_from, that can be invoked per fib6_nh with a
reference to the from entries that need to be evicted. If the passed
in 'from' is non-NULL then only entries associated with that fib6_info
are removed (e.g., case where fib entry is deleted); if the 'from' is
NULL are entries are flushed (e.g., fib6_nh is deleted).
For fib6_info entries with builtin fib6_nh (ie., current code) there
is no change in behavior.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Thu, 23 May 2019 03:27:55 +0000 (20:27 -0700)]
ipv6: Move pcpu cached routes to fib6_nh
rt6_info are specific instances of a fib entry and are tied to a
device and gateway - ie., a nexthop. Before nexthop objects, IPv6 fib
entries have separate fib6_info for each nexthop in a multipath route,
so the location of the pcpu cache in the fib6_info struct worked.
However, with nexthop objects a fib6_info can point to a set of nexthops
(yet another alignment of ipv6 with ipv4). Accordingly, the pcpu
cache needs to be moved to the fib6_nh struct so the cached entries
are local to the nexthop specification used to create the rt6_info.
Initialization and free of the pcpu entries moved to fib6_nh_init and
fib6_nh_release.
Change in location only, from fib6_info down to fib6_nh; no other
functional change intended.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 24 May 2019 20:16:33 +0000 (13:16 -0700)]
Merge branch 'ENETC-support-hardware-timestamping'
Y.b. Lu says:
====================
ENETC: support hardware timestamping
This patch-set is to support hardware timestamping for ENETC
and also to add ENETC 1588 timer device tree node for ls1028a.
Because the ENETC RX BD ring dynamic allocation has not been
supported and it is too expensive to use extended RX BDs
if timestamping is not used, a Kconfig option is used to
enable extended RX BDs in order to support hardware
timestamping. This option will be removed once RX BD
ring dynamic allocation is implemented.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Y.b. Lu [Thu, 23 May 2019 02:33:41 +0000 (02:33 +0000)]
arm64: dts: fsl: ls1028a: add ENETC 1588 timer node
Add ENETC 1588 timer node which is ENETC PF 4 (Physiscal Function 4).
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>