John Crispin [Tue, 24 Jun 2014 18:13:47 +0000 (18:13 +0000)]
atheros[ar2315-spiflash]: remove duplicated definitions
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 41325
John Crispin [Tue, 24 Jun 2014 18:13:43 +0000 (18:13 +0000)]
atheros[ar2315-spiflash]: update driver id
Make id more specific and consistent with others platform drivers.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 41324
John Crispin [Tue, 24 Jun 2014 18:13:39 +0000 (18:13 +0000)]
atheros[ar2315-spiflash]: make local variables and functions static
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 41323
John Crispin [Tue, 24 Jun 2014 18:13:35 +0000 (18:13 +0000)]
atheros[ar2315-spiflash]: I/O fixes
Directly use ioread/iowrite functions to avoid odd dependency. And
carefully annotate I/O memory pointers.
Singed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 41322
John Crispin [Tue, 24 Jun 2014 18:13:31 +0000 (18:13 +0000)]
atheros[ar2315-spiflash]: make spiflash header local
We do not need global access to it, so move it from arch include to the
mtd subdir.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 41321
John Crispin [Tue, 24 Jun 2014 18:13:27 +0000 (18:13 +0000)]
atheros[ar2315-spiflash]: pass I/O mem regions via resources
Pass I/O memory regions (flash read and MMR) via platform device
resources array and use them inside spiflash driver.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 41320
John Crispin [Tue, 24 Jun 2014 18:13:22 +0000 (18:13 +0000)]
atheros[ar231x-pci]: do not touch iomem_resource ranges
Moving the start of IO mem to 0x10000000 leads to allocation conflict
with SPI flash memory region, which starts at 0x08000000.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 41319
John Crispin [Tue, 24 Jun 2014 18:13:17 +0000 (18:13 +0000)]
atheros[ar2315-spiflash]: print detected flash size
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 41318
John Crispin [Tue, 24 Jun 2014 18:13:13 +0000 (18:13 +0000)]
atheros[ar2315]: don't detect flash size during board initialization
We should not detect actual flash size during board initialization to
find board config at the end of the flash, just use large enough mapping
size (currently 128 mbit). If mapping size is larger than the actual
flash size, than flash will simply be mapped multiple times. This change
simplifies code by removing duplication and saves about 200 bytes of
uncompressed kernel :)
Tested with Ubnt LS2 board equipped with STM 25p32v6p NOR flash (32 mbit).
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 41317
John Crispin [Tue, 24 Jun 2014 18:13:09 +0000 (18:13 +0000)]
atheros[ar231x-eth]: merge patch
Merge 3_10-updates.patch into the ar2313_ethernet.patch since it contains
only one ethernet driver fix.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 41316
John Crispin [Tue, 24 Jun 2014 18:13:05 +0000 (18:13 +0000)]
fstools: fix factory reset on ubifs overlay
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 41315
John Crispin [Tue, 24 Jun 2014 18:13:00 +0000 (18:13 +0000)]
firmware-utils/mkdir615h1: fix magic XOR calculation
Signed-off-by: Forest Crossman <cyrozap@gmail.com>
SVN-Revision: 41314
John Crispin [Tue, 24 Jun 2014 18:12:56 +0000 (18:12 +0000)]
uboot-envtools: fix build if ubi volume support is disabled
Insert a missing #ifdef UBI around the use of libubi_close().
As the preceding if (libubi) will never be true on non-UBI builds,
compiling only failed when disabling optimization.
Also rebase patch to latest u-boot.git HEAD.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 41313
John Crispin [Tue, 24 Jun 2014 18:12:52 +0000 (18:12 +0000)]
lantiq: remove deprecated jffs2_nand configuration
As far as I am aware, amongst the lantiq boards, jffs2_nand was
only used on the BTHOMEHUBV2B. Ubi-related modifications to the
device tree for that board mean that the resulting jffs2 images
no longer work, and are no longer required anyway. So I suggest
removing the related configuration, which this patch does.
If anyone else is using jffs2_nand on a lantiq target please speak
up!
Incidentally, for a jffs2 rootfs partition concatenated to the
kernel image to be recognised and mounted correctly on nand
this patch or something equivalent is required:
http://patchwork.openwrt.org/patch/5110/
It is marked as accepted in patchwork but doesn't seem to have
been committed. As far as I am concerned it too is deprecated.
Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>
SVN-Revision: 41312
John Crispin [Tue, 24 Jun 2014 18:12:47 +0000 (18:12 +0000)]
image.mk: introduce Image/Build/UbinizeImage make target
paramters:
$(1) board name
$(2) ubinize-image options (e.g. --no-kernel and/or --uboot-env)
$(3) rootfstype (e.g. squashfs or ubifs)
$(4) kernel image file
$(5) options to pass-through to ubinize (i.e. $($(PROFILE)_UBI_OPTS)))
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 41311
John Crispin [Tue, 24 Jun 2014 18:12:41 +0000 (18:12 +0000)]
lantiq: ubinize autoresize flag for rootfs_data
Setting this flag allows rootfs_data to expand on first boot
to fill remaining free space on nand.
Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>
SVN-Revision: 41310
Luka Perkov [Tue, 24 Jun 2014 12:27:36 +0000 (12:27 +0000)]
kernel: update 3.14 to 3.14.8
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 41309
Steven Barth [Sun, 22 Jun 2014 15:34:36 +0000 (15:34 +0000)]
dnsmasq: use config_get_bool for dnsmasq
SVN-Revision: 41302
Felix Fietkau [Sun, 22 Jun 2014 11:52:53 +0000 (11:52 +0000)]
mac80211: disable greenfield by default
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41300
Felix Fietkau [Sun, 22 Jun 2014 11:42:28 +0000 (11:42 +0000)]
iw: update to 3.15
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41299
Felix Fietkau [Sun, 22 Jun 2014 11:42:24 +0000 (11:42 +0000)]
mac80211: revert a faulty upstream change which is causing channel 12 to be enabled for US regdomain
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41298
Steven Barth [Sun, 22 Jun 2014 09:08:14 +0000 (09:08 +0000)]
dnsmasq: set procd respawn
SVN-Revision: 41297
Jonas Gorski [Sat, 21 Jun 2014 19:23:38 +0000 (19:23 +0000)]
brcm63xx: allow bcm963xx and livebox support at the same time
Use the CFE_EPTSEAL to tell them apart at runtime. Added for now only
for the 3.14 until properly tested.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 41296
Jonas Gorski [Sat, 21 Jun 2014 19:23:28 +0000 (19:23 +0000)]
brcm63xx: update variant detection patches and fix VARID shift
The variant id field shift was wrong, causing the variant detection
to fail.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 41295
Jonas Gorski [Sat, 21 Jun 2014 19:23:18 +0000 (19:23 +0000)]
brcm63xx: fix up borked patch
Fix up patch borked by quilt fuzzy application of patches.
SVN-Revision: 41294
Imre Kaloz [Sat, 21 Jun 2014 10:00:07 +0000 (10:00 +0000)]
coding style cleanups, drop old kernel support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 41293
Imre Kaloz [Fri, 20 Jun 2014 23:05:23 +0000 (23:05 +0000)]
update mamba dts
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 41292
Imre Kaloz [Fri, 20 Jun 2014 22:35:09 +0000 (22:35 +0000)]
make script executable, add WRT1900AC detection
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 41291
Imre Kaloz [Fri, 20 Jun 2014 20:44:18 +0000 (20:44 +0000)]
make thermal framework registered sensors also register as hwmons
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 41290
Imre Kaloz [Fri, 20 Jun 2014 20:42:47 +0000 (20:42 +0000)]
package the gpio-fan module
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 41289
Imre Kaloz [Fri, 20 Jun 2014 19:13:01 +0000 (19:13 +0000)]
define the power led for the WRT1900AC
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 41288
Steven Barth [Fri, 20 Jun 2014 17:51:25 +0000 (17:51 +0000)]
netifd: various routing table handling fixes
SVN-Revision: 41287
John Crispin [Fri, 20 Jun 2014 13:41:16 +0000 (13:41 +0000)]
octeon: add sysupgrade support for the erlite
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41286
John Crispin [Fri, 20 Jun 2014 13:41:12 +0000 (13:41 +0000)]
octeon: build a sysupgrade image for erlite
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41285
John Crispin [Fri, 20 Jun 2014 13:41:08 +0000 (13:41 +0000)]
base-files: regenerate the /lib64 symlink when switching to a ramdisk
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41284
Jo-Philipp Wich [Fri, 20 Jun 2014 12:28:35 +0000 (12:28 +0000)]
Revert "netifd: fix handling of "lookup main" for ip rules (#15315)"
The netifd fixes went to the wrong repository, revert until it is sorted out.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 41283
Jo-Philipp Wich [Fri, 20 Jun 2014 09:58:16 +0000 (09:58 +0000)]
netifd: fix handling of "lookup main" for ip rules (#15315)
Reworks the handling of RT_TABLE_MAIN in system-linux.c so that ip rules
with lookup main can be properly setup.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 41282
Jo-Philipp Wich [Thu, 19 Jun 2014 16:06:44 +0000 (16:06 +0000)]
base-files: depend on jsonfilter and rewrite network.sh to use it
Switches /lib/functions/network.sh from jshn based json parsing to
jsonfilter expression while keeping the existing api.
Expensive methods like "network_find_wan" are up to 20x faster now.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 41281
Jo-Philipp Wich [Thu, 19 Jun 2014 15:30:59 +0000 (15:30 +0000)]
jsonfilter: implement custom separators and support limiting the results, fix handling of negative array indices
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 41280
John Crispin [Thu, 19 Jun 2014 14:13:45 +0000 (14:13 +0000)]
procd: update to latest git head
this fixes the upgraded linking issue on arm.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41279
John Crispin [Thu, 19 Jun 2014 14:13:41 +0000 (14:13 +0000)]
procd: various improvements to nand.sh
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41278
John Crispin [Thu, 19 Jun 2014 14:13:38 +0000 (14:13 +0000)]
imx6: add sysupgrade support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41277
John Crispin [Thu, 19 Jun 2014 14:13:34 +0000 (14:13 +0000)]
imx6: the script populating /tmp/sysinfo/ was in the wrong path
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41276
John Crispin [Thu, 19 Jun 2014 14:13:30 +0000 (14:13 +0000)]
octeon: enable the ext4 feature
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41275
John Crispin [Thu, 19 Jun 2014 14:13:20 +0000 (14:13 +0000)]
octeon: add basic board detection
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41274
John Crispin [Thu, 19 Jun 2014 14:13:16 +0000 (14:13 +0000)]
toolchain: make the default eglibc selection work even if TOOLCHAINOPTS is not enabled
default config build fail on octeon without this.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41273
John Crispin [Thu, 19 Jun 2014 14:13:12 +0000 (14:13 +0000)]
kernel: drop now unused ubi forced detach patch
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41272
John Crispin [Thu, 19 Jun 2014 14:13:07 +0000 (14:13 +0000)]
ramips: cleanup some rt305x profiles
move both asus boards to asus.mk
rename HW5503G profile to HW550-3G to match name in image/Makefile
(fixes #16599)
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 41271
John Crispin [Thu, 19 Jun 2014 14:13:04 +0000 (14:13 +0000)]
lantiq: copy rootfs-overlay.ubi to bin/lantiq
At the moment, an rootfs.ubi is copied over to bin/lantiq
but rootfs-overlay.ubi is not. This adds it.
Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>
SVN-Revision: 41270
John Crispin [Thu, 19 Jun 2014 14:12:59 +0000 (14:12 +0000)]
lantiq: refresh patches
this adds ben's ath9k fixup
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41269
John Crispin [Thu, 19 Jun 2014 14:12:55 +0000 (14:12 +0000)]
base-files: add upgraded to the list of daemons not killed
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41268
Jo-Philipp Wich [Thu, 19 Jun 2014 07:56:24 +0000 (07:56 +0000)]
jsonfilter: improve error reporting
The CLI now describes expression errors more precisely, e.g.:
Syntax error: Invalid escape sequence
In expression @["foo\x"]
Near here ----------^
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 41266
Steven Barth [Wed, 18 Jun 2014 17:06:37 +0000 (17:06 +0000)]
dnsmasq: removing nettle 3.0 support due to nettle downgrade
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 41264
Steven Barth [Wed, 18 Jun 2014 17:06:30 +0000 (17:06 +0000)]
nettle: downgrade to 2.7.1 since gnutls is incompatible with 3.0
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 41263
Florian Fainelli [Wed, 18 Jun 2014 16:34:23 +0000 (16:34 +0000)]
imx6: fix typo on wandboard detection
Revision r41256 introduced a typo (wandaboard => wandboard), but later
revisions expect to match on "wandboard"
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 41262
Steven Barth [Wed, 18 Jun 2014 12:10:10 +0000 (12:10 +0000)]
odhcpd: improve static DHCPv4 leases (thanks arnd)
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 41260
Steven Barth [Wed, 18 Jun 2014 11:29:09 +0000 (11:29 +0000)]
netifd: various bugfixes (thanks Hans Dedecker)
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 41259
Jo-Philipp Wich [Wed, 18 Jun 2014 10:10:30 +0000 (10:10 +0000)]
jsonpath: rename to jsonfilter and rewrite from flex/bison to lemon
This commit renames the jsonpath binary to jsonfilter to avoid clashing with a Python
extension of the same name.
The utility itself has been rewritten to use SQLite3's lemon parser generator instead
of a flex/bison combination which results in a much smaller binary.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 41258
John Crispin [Wed, 18 Jun 2014 10:08:16 +0000 (10:08 +0000)]
imx6: use /lib/imx6.sh inside the uci-defaults script
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41257
John Crispin [Wed, 18 Jun 2014 10:08:12 +0000 (10:08 +0000)]
imx6: add a script to detect the board name and populate /tmp/sysinfo
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41256
John Crispin [Wed, 18 Jun 2014 10:08:08 +0000 (10:08 +0000)]
ar71xx: Fixes for 951Ui-2HnD board support
WAN and LAN are swapped the wrong way around. This patch fixes that by adding the 951Ui-2HnD to ar71xx.sh and the relevant entry in 02_network.
This patch also defines the ACT LED as the status LED in diag.sh.
Signed-off-by: Matthew Reeve <mreeve@tenxnetworks.com>
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41255
John Crispin [Wed, 18 Jun 2014 10:08:05 +0000 (10:08 +0000)]
relayd: update to latest git head
this fixes multicast fowarding on relayd links
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41254
John Crispin [Wed, 18 Jun 2014 10:08:01 +0000 (10:08 +0000)]
octeon: fix up the cpu flags
Signed-off-by: Martin Fäcknitz <faecknitz@hotsplots.de>
SVN-Revision: 41253
John Crispin [Wed, 18 Jun 2014 10:07:57 +0000 (10:07 +0000)]
octeon: add 3 upstream patches that fix issues on the esr-lite
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41252
John Crispin [Wed, 18 Jun 2014 10:07:53 +0000 (10:07 +0000)]
toolchain: use different defaults for octeon
force eglibc and gcc4.6+linaro for octeon
Signed-off-by: Martin Fäcknitz <faecknitz@hotsplots.de>
SVN-Revision: 41251
John Crispin [Wed, 18 Jun 2014 10:07:49 +0000 (10:07 +0000)]
include/target.mk: add CPU_CFLAGS_octeon
Signed-off-by: Martin Fäcknitz <faecknitz@hotsplots.de>
SVN-Revision: 41250
Steven Barth [Wed, 18 Jun 2014 10:04:47 +0000 (10:04 +0000)]
dnsmasq: compatibility with nettle 3.0
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 41249
Steven Barth [Wed, 18 Jun 2014 10:04:43 +0000 (10:04 +0000)]
nettle: import from packages, update to 3.0
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 41248
Steven Barth [Wed, 18 Jun 2014 10:04:38 +0000 (10:04 +0000)]
gmp: import from packages, update and reduce size
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 41247
Steven Barth [Wed, 18 Jun 2014 10:04:34 +0000 (10:04 +0000)]
dnsmasq: various house-keeping updates
* Add Authoritative DNS and IPSET to full variant
* Remove some bloat from IPSET support
* Reintroduce "DHCP no address warning"-patch
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 41246
Steven Barth [Wed, 18 Jun 2014 10:04:29 +0000 (10:04 +0000)]
dnsmasq: add UCI DNSSEC runtime support
Ship keys for the root zone and add two uci options to enable
DNSSEC checks:
Option 'dnssec': Activate DNSSEC validation
Option 'dnsseccheckunsigned': Ensure answers without DNSSEC are in
unsigned zones.
Signed-off-by: Andre Heider <a.heider@gmail.com>
SVN-Revision: 41245
Steven Barth [Wed, 18 Jun 2014 10:04:25 +0000 (10:04 +0000)]
dnsmasq: Add a full variant
This variant includes support for DHCPv6 and DNSSEC.
DNSSEC adds a dependency on libnettle.
Signed-off-by: Andre Heider <a.heider@gmail.com>
SVN-Revision: 41244
Steven Barth [Wed, 18 Jun 2014 10:04:21 +0000 (10:04 +0000)]
dnsmasq: add upstream patch to build against libnettle-mini
Signed-off-by: Andre Heider <a.heider@gmail.com>
SVN-Revision: 41243
Steven Barth [Wed, 18 Jun 2014 10:04:17 +0000 (10:04 +0000)]
dnsmasq: respect target's LDFLAGS
Append local flags, don't overwrite.
Signed-off-by: Andre Heider <a.heider@gmail.com>
SVN-Revision: 41242
Steven Barth [Wed, 18 Jun 2014 10:04:02 +0000 (10:04 +0000)]
dnsmasq: use COPTS for compile time options
As documented in config.h.
Doing otherwise will break dnsmasq's pkg-wrapper script to find its
libs to link to.
Signed-off-by: Andre Heider <a.heider@gmail.com>
SVN-Revision: 41241
Luka Perkov [Tue, 17 Jun 2014 21:04:45 +0000 (21:04 +0000)]
mvebu: be consistent with kernel config file names
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 41240
John Crispin [Tue, 17 Jun 2014 17:51:35 +0000 (17:51 +0000)]
procd: forgot to update the git id in the last commit
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41239
John Crispin [Tue, 17 Jun 2014 15:40:05 +0000 (15:40 +0000)]
procd: make upgarded depend on mips, the static linking on arm fails
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41238
John Crispin [Tue, 17 Jun 2014 15:40:02 +0000 (15:40 +0000)]
procd: some cleanup for SysupgradeNAND
Removed unused ubi file file from template as ubinized images are
passed directly and not inside the tarball.
Also removed left-over white-space.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 41237
John Crispin [Tue, 17 Jun 2014 15:38:54 +0000 (15:38 +0000)]
lantiq: DGN3500 (all known variants) factory and sysupgrade image building support
This patch adds factory image building for the DGN3500, all variants,
and fixes sysupgrade images to make them play nice with the sercomm
secondary boot loader.
The factory images can be used directly in the update dialog in the
interface of the stock firmware and via the special Sercomm bootmode
and a special windows flashing utility (allegedly present in the CD
that came with the device -- but it's also compatible with the NSLU2
Upgrade_207_XP utility.) The special bootmode can be activated by
turning the device on while holding the reset button pressed, then
releasing it when the power led starts blinking red and green. Please
notice that if using the 207 utility, it will always report that the
flashing failed even though it completed successfully. Just power
cycle the router manually after the utility reports the failure and
OpenWRT will boot. This same utility (despite reporting failure in
this case too) can revert a DGN3500 (any variant) to the appropriate
stock Netgear firmware.
This patch is a heavily modified version of a package I found on the
OpenWRT forum with a couple fixes and features added -- mainly the
generation of all the different image variants to support all known
models directly, atm known variants are AnnexA-WW, AnnexA-NA and
AnnexB-DE/GR.
I tested the patch successfully on my device.
Signed-off-by: Marco Antonio Mauro <marcus90@gmail.com>
SVN-Revision: 41236
Imre Kaloz [Tue, 17 Jun 2014 15:15:05 +0000 (15:15 +0000)]
package the TLC59116 led driver
SVN-Revision: 41235
Imre Kaloz [Tue, 17 Jun 2014 15:14:02 +0000 (15:14 +0000)]
add dummy fixup for 3.10
SVN-Revision: 41234
Imre Kaloz [Tue, 17 Jun 2014 15:13:33 +0000 (15:13 +0000)]
build images for the WRT1900AC
SVN-Revision: 41233
Imre Kaloz [Tue, 17 Jun 2014 15:13:10 +0000 (15:13 +0000)]
preliminary support for the WRT1900AC (work in progress)
SVN-Revision: 41232
Imre Kaloz [Tue, 17 Jun 2014 15:03:05 +0000 (15:03 +0000)]
package the TI TMP421 driver
SVN-Revision: 41231
Imre Kaloz [Tue, 17 Jun 2014 15:02:28 +0000 (15:02 +0000)]
bundle ehci-orion with kmod-usb2
SVN-Revision: 41230
Jo-Philipp Wich [Tue, 17 Jun 2014 15:01:47 +0000 (15:01 +0000)]
mpc85xx: fix typo in TP-Link WDR4900 profile
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 41229
Steven Barth [Tue, 17 Jun 2014 13:05:24 +0000 (13:05 +0000)]
odhcpd: don't enable relaying by default anymore
SVN-Revision: 41228
Steven Barth [Tue, 17 Jun 2014 12:43:30 +0000 (12:43 +0000)]
iproute2: update version to 3.15.0, refresh patches, add maintainer
Signed-off-by: Russell Senior <russell@personaltelco.net>
SVN-Revision: 41227
Steven Barth [Tue, 17 Jun 2014 07:59:15 +0000 (07:59 +0000)]
odhcpd: also honor leasetime for dhcpv6
SVN-Revision: 41226
Steven Barth [Tue, 17 Jun 2014 07:44:24 +0000 (07:44 +0000)]
odhcpd: Improve NotOnLink-behavior and make hostid more convient to configure
SVN-Revision: 41225
John Crispin [Mon, 16 Jun 2014 18:57:20 +0000 (18:57 +0000)]
ramips: RT-N56U support fixes and factory image creation
Signed-off-by: Mikko Hissa <mikko.hissa@werzek.com>
SVN-Revision: 41224
John Crispin [Mon, 16 Jun 2014 18:55:18 +0000 (18:55 +0000)]
include/image.mk: cleanup the SysupgradeNAND template
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41223
John Crispin [Mon, 16 Jun 2014 18:55:14 +0000 (18:55 +0000)]
procd: various cleanups to /lib/upgrade/nand.sh
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41222
John Crispin [Mon, 16 Jun 2014 18:55:09 +0000 (18:55 +0000)]
procd: update to latest git HEAD
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41221
John Crispin [Mon, 16 Jun 2014 18:55:05 +0000 (18:55 +0000)]
procd: rename procd_add_network_trigger
i got complaints about the bad naming of the api. lets rename it while there are no users yet.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41220
John Crispin [Mon, 16 Jun 2014 18:55:01 +0000 (18:55 +0000)]
kernel/3.1{0, 2, 3, 4}: mtd: m25p80: add support for EON EN25QH128
This flash is used in newer Ubnt UniFi AP Pro
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 41219
John Crispin [Mon, 16 Jun 2014 18:54:57 +0000 (18:54 +0000)]
kernel: replace a ubifs patch by upstream commit
A modified version of 552-ubifs-respect-silent-mount-flag.patch has
been merged upstream. Replace the patch in OpenWrt with the version
which has been merged.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 41218
John Crispin [Mon, 16 Jun 2014 18:54:53 +0000 (18:54 +0000)]
ramips: fixes XDXRN502J reset button
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41217
John Crispin [Mon, 16 Jun 2014 18:54:48 +0000 (18:54 +0000)]
ramips: add vlan configuration for asiarf awm002-evb
Without this, the ports all end up on vlan 1. This enables a separate
WAN port that works.
Signed-off-by: Russell Senior <russell@personaltelco.net>
SVN-Revision: 41216
projects / openwrt / staging / aparcar.git / log