Gabor Juhos [Thu, 2 Aug 2012 09:54:41 +0000 (09:54 +0000)]
ar71xx: image: stop the switch from the lzma-loader on the TL-WR1043ND
SVN-Revision: 32946
Gabor Juhos [Thu, 2 Aug 2012 09:54:33 +0000 (09:54 +0000)]
ar71xx: image: allow to use board specific code in the lzma-loader
SVN-Revision: 32945
Gabor Juhos [Thu, 2 Aug 2012 09:54:28 +0000 (09:54 +0000)]
ar71xx: init switch hw_reset on the TL-WR1043ND board
SVN-Revision: 32944
Gabor Juhos [Thu, 2 Aug 2012 09:54:21 +0000 (09:54 +0000)]
generic: rtl836x: add hw_reset field to struct rtl8366_smi
It will be used to start/stop the switch if that is
supported by the given board.
SVN-Revision: 32943
Gabor Juhos [Thu, 2 Aug 2012 09:54:13 +0000 (09:54 +0000)]
generic: rtl8366_smi: use __rtl8366_smi_cleanup instead of gpio_free calls
SVN-Revision: 32942
Florian Fainelli [Wed, 1 Aug 2012 22:09:13 +0000 (22:09 +0000)]
[mcs814x] add missing netmask to the network config
SVN-Revision: 32941
Florian Fainelli [Wed, 1 Aug 2012 21:56:54 +0000 (21:56 +0000)]
[mcs814x] assume the link is up and full-duplex by default
SVN-Revision: 32940
Florian Fainelli [Wed, 1 Aug 2012 21:56:49 +0000 (21:56 +0000)]
[mcs814x] add a default and suitable network config file
SVN-Revision: 32939
Gabor Juhos [Wed, 1 Aug 2012 12:24:57 +0000 (12:24 +0000)]
ar71xx: ew-dorin: added router firmware generation
[juhosg: remove dead code]
Signed-off-by: embedded wireless GmbH <info@embeddedwireless.de>
SVN-Revision: 32934
Gabor Juhos [Wed, 1 Aug 2012 12:24:56 +0000 (12:24 +0000)]
ar71xx: ew-dorin: added USB support
Signed-off-by: embedded wireless GmbH <info@embeddedwireless.de>
SVN-Revision: 32933
Gabor Juhos [Wed, 1 Aug 2012 12:24:54 +0000 (12:24 +0000)]
ar71xx: Buffalo WLAE-AG300N wireless led patch
Here is the uci-defaults version of the led support for
the Buffalo WLAE-AG300N.
Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>
SVN-Revision: 32932
Gabor Juhos [Wed, 1 Aug 2012 12:24:52 +0000 (12:24 +0000)]
ar71xx: Buffalo WLAE-AG300N initial support
The patch set for Buffalo WLAE-AG300N initial support.
There is another patch for wireless led support that
is posted separately.
Note on serial console:
This unit has buffalo standard 4 pin console, but the unit may not power
on if some console apparatus is connected. This is probably due to some
electronic interaction between the unit's electronic power switch circuit
and the serial console apparatus. If this happens, it is required to power
on the unit without the console, then quickly (re-)attach it.
[juhosg: fix coding style]
Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>
SVN-Revision: 32931
Florian Fainelli [Wed, 1 Aug 2012 12:01:27 +0000 (12:01 +0000)]
[mcs814x] resync defconfig enable XZ compression
SVN-Revision: 32930
Florian Fainelli [Wed, 1 Aug 2012 12:01:24 +0000 (12:01 +0000)]
[package] uclibc++: update to 0.2.4
SVN-Revision: 32929
Florian Fainelli [Wed, 1 Aug 2012 12:01:18 +0000 (12:01 +0000)]
[package] uclibc++: stage g++-uc wrappers in $(TOOLCHAIN_DIR)
Since we are overriding TARGET_CXX with the g++-uc wrapper when
we use cmake it expects to find g++-uc in the TOOLCHAIN_DIR.
SVN-Revision: 32928
Florian Fainelli [Tue, 31 Jul 2012 23:09:50 +0000 (23:09 +0000)]
[mcs814x] properly generate squashfs, jffs2 and initramfs images and kernels
SVN-Revision: 32927
Florian Fainelli [Tue, 31 Jul 2012 23:09:46 +0000 (23:09 +0000)]
[kernel] disable crashlog on ARM platforms for the moment
It is currently badly broken on ARM, until fixed, disable it
SVN-Revision: 32926
John Crispin [Tue, 31 Jul 2012 18:49:54 +0000 (18:49 +0000)]
[lantiq] add lantiq svip support
SVN-Revision: 32925
Jonas Gorski [Tue, 31 Jul 2012 14:27:47 +0000 (14:27 +0000)]
bcm63xx: Add nb6 support (BCM6362 SoC base boards)
Signed-off-by: Miguel GAIO <miguel.gaio@efixo.com>
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
[jonas.gorski@gmail.com: add network config for nb6, make switch fix a
platform patch]
SVN-Revision: 32924
Jonas Gorski [Tue, 31 Jul 2012 14:27:42 +0000 (14:27 +0000)]
bcm63xx: add basic bcm6362 support
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 32923
Jonas Gorski [Tue, 31 Jul 2012 14:27:34 +0000 (14:27 +0000)]
bcm63xx: enable usb for bcm6328
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 32922
Jonas Gorski [Tue, 31 Jul 2012 14:27:31 +0000 (14:27 +0000)]
bcm63xx: update enetswitch driver
Update enetswith driver with latest fixes and additions.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 32921
Jonas Gorski [Tue, 31 Jul 2012 14:27:25 +0000 (14:27 +0000)]
bcm63xx: reorder patches
Fix the order and names of patches.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 32920
Florian Fainelli [Sun, 29 Jul 2012 13:20:51 +0000 (13:20 +0000)]
[at91] move i2c module to target modules.mk
SVN-Revision: 32910
Florian Fainelli [Sun, 29 Jul 2012 13:20:47 +0000 (13:20 +0000)]
[package] partially revert r32855
Too many modules were removed, while only the octeon module was meant to be
removed, fix that.
SVN-Revision: 32909
Florian Fainelli [Sun, 29 Jul 2012 13:20:39 +0000 (13:20 +0000)]
[omap24xx] resync config
SVN-Revision: 32908
Florian Fainelli [Sun, 29 Jul 2012 13:20:35 +0000 (13:20 +0000)]
[omap24xx] use the same description as other omap platforms (without the dash)
SVN-Revision: 32907
John Crispin [Sun, 29 Jul 2012 11:53:06 +0000 (11:53 +0000)]
[kernel] refresh pwm patch
SVN-Revision: 32905
John Crispin [Sun, 29 Jul 2012 09:07:47 +0000 (09:07 +0000)]
[acx-mac80211] dont build on arm as kernel headers are missing/have a different layout
SVN-Revision: 32904
John Crispin [Sat, 28 Jul 2012 21:06:59 +0000 (21:06 +0000)]
[include] fix up scons vs ccache
SVN-Revision: 32902
John Crispin [Sat, 28 Jul 2012 20:47:08 +0000 (20:47 +0000)]
[kernel] clean up pwm patches and drivers
SVN-Revision: 32901
Hauke Mehrtens [Sat, 28 Jul 2012 11:36:52 +0000 (11:36 +0000)]
[kernel] add config option CONFIG_I2C_MV64XXX to fix kirkwood build
SVN-Revision: 32898
Florian Fainelli [Fri, 27 Jul 2012 15:35:15 +0000 (15:35 +0000)]
[realview] resync config
SVN-Revision: 32895
Florian Fainelli [Fri, 27 Jul 2012 15:35:12 +0000 (15:35 +0000)]
[brcm63xx] fix DVA-G3810BN image generation
Attached patch fixes a typo in the image Makefile, and overrides the
board name for DVA-G3810BN to set the correct board properties
Signed-Off-By: Jeroen van Bemmel <jbemmel@zonnet.nl>
SVN-Revision: 32894
Florian Fainelli [Fri, 27 Jul 2012 15:35:09 +0000 (15:35 +0000)]
[brcm63xx] add D-link DVA-G3810BN-TL-1 support
Signed-Off-By: Jeroen van Bemmel <jbemmel@zonnet.nl>
SVN-Revision: 32893
Florian Fainelli [Fri, 27 Jul 2012 15:35:05 +0000 (15:35 +0000)]
[brcm63xx] Add CT6376-1 board support
Added CT6373 devices instead of using NB4's devices, as Florian suggested.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 32892
Florian Fainelli [Fri, 27 Jul 2012 15:35:00 +0000 (15:35 +0000)]
[package] base-files: fix detection of standalone ldd
When standalone ldd is selected in config the binary is installed in /usr/bin/ldd.
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
SVN-Revision: 32891
Florian Fainelli [Fri, 27 Jul 2012 15:34:57 +0000 (15:34 +0000)]
[brcm63xx] Add brcmsmac profile
Add brcmsmac profile (kmod-brcmsmac + wpad-mini).
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 32890
John Crispin [Fri, 27 Jul 2012 08:30:05 +0000 (08:30 +0000)]
[mac80211] mae brcmutil depend on PCI and USB. This broke ar7 fullbuilds
SVN-Revision: 32886
John Crispin [Thu, 26 Jul 2012 17:06:55 +0000 (17:06 +0000)]
[atheros] Add leds back after migration to sysfs
atheros trunk moved to full sysfs gpiolib, but the leds were forgotten.
This restores the wlan led that was missing after switching from backfire
to trunk.
Signed-off-by: Karl Palsson <karlp@remake.is>
SVN-Revision: 32885
Florian Fainelli [Thu, 26 Jul 2012 17:03:08 +0000 (17:03 +0000)]
[brcm2708] add more missing config symbols
SVN-Revision: 32884
Florian Fainelli [Thu, 26 Jul 2012 17:03:05 +0000 (17:03 +0000)]
[generic] add more USB-related config symbols
SVN-Revision: 32883
Florian Fainelli [Thu, 26 Jul 2012 17:03:02 +0000 (17:03 +0000)]
[ep93xx] make sure target modules depend on the target
SVN-Revision: 32882
Hauke Mehrtens [Thu, 26 Jul 2012 15:42:18 +0000 (15:42 +0000)]
[kernel] bcma: update to version from wireless-testing tag master-2012-07-16
I did not add the last patch, because it add some stubs for the flash drivers and our patches have to be changed for that, if the flash support in bcma is able to do something I will integrate it.
This also contains 3 additional patches fixing some bugs in bcma.
SVN-Revision: 32880
Florian Fainelli [Thu, 26 Jul 2012 09:29:22 +0000 (09:29 +0000)]
[package] make kmod-mvsas depend on x86 since it fails building on other targets (eg: brcm63xx)
SVN-Revision: 32878
John Crispin [Wed, 25 Jul 2012 19:52:30 +0000 (19:52 +0000)]
[ar71xx] fix typo in modules.mk
This patch fixes a small typo in kmod-leds-wndr3700-usb description, where the board is for some reason made by NETGWR, not NETGEAR.
Signed-off-by: Roman A. aka BasicXP <x12ozmouse@ya.ru>
SVN-Revision: 32870
Florian Fainelli [Wed, 25 Jul 2012 19:36:19 +0000 (19:36 +0000)]
[package] make kmod-fb dependent on DISPLAY_SUPPORT and update targets accordingly
SVN-Revision: 32869
Felix Fietkau [Wed, 25 Jul 2012 17:28:32 +0000 (17:28 +0000)]
mtd: fix trx_fixup
With the BRCM47xx image I have built (Linksys E3000), there are additional
writes following the completion of "mtd_replace_jffs2" which invalidate the
'trx_fixup' performed by 'mtd_replace_jffs2'. Moving the 'trx_fixup' to somewhere
after all writes have completed fixes the problem. I also noticed that 'erasesize'
used to compute 'block_offset' in 'mtd_fixtrx' is used before it is computed by
'mtd_check_open'; moving the call to 'mtd_check_open' up a few lines fixes this.
Unlike 'mtd_fixtrx', 'trx_fixup' appears to assume that the TRX header is always at
offset 0; which may be the cause of the problem described in Ticket #8960.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 32866
Florian Fainelli [Wed, 25 Jul 2012 15:50:45 +0000 (15:50 +0000)]
[ppc40x] move isp116x driver to target specific modules.mk
SVN-Revision: 32865
Florian Fainelli [Wed, 25 Jul 2012 15:50:42 +0000 (15:50 +0000)]
[ramips] move rt305x-dwc driver to target specific modules.mk
SVN-Revision: 32864
Florian Fainelli [Wed, 25 Jul 2012 15:50:38 +0000 (15:50 +0000)]
[brcm47xx] move ubsec-ssb driver to target specific modules.mk
SVN-Revision: 32863
Florian Fainelli [Wed, 25 Jul 2012 15:50:36 +0000 (15:50 +0000)]
[brcm47xx] move ssb-gige to target specific modules.mk
SVN-Revision: 32862
Florian Fainelli [Wed, 25 Jul 2012 15:50:33 +0000 (15:50 +0000)]
[brcm47xx] move usb driver to target specific modules.mk
SVN-Revision: 32861
Florian Fainelli [Wed, 25 Jul 2012 15:50:29 +0000 (15:50 +0000)]
[package] kmod-r6040 depends on PCI_SUPPORT
SVN-Revision: 32860
Florian Fainelli [Wed, 25 Jul 2012 15:50:26 +0000 (15:50 +0000)]
[avr32] move mmc driver to target specific modules.mk
SVN-Revision: 32859
Florian Fainelli [Wed, 25 Jul 2012 15:50:23 +0000 (15:50 +0000)]
[ixp4xx] move ixp4xx-eth to target specific modules.mk
SVN-Revision: 32858
Florian Fainelli [Wed, 25 Jul 2012 15:50:20 +0000 (15:50 +0000)]
[package] kmod-gpio-nxp74hc164 is not brcm63xx specific
SVN-Revision: 32857
Florian Fainelli [Wed, 25 Jul 2012 15:50:16 +0000 (15:50 +0000)]
[ixp4xx] move crypto module to target specific modules.mk
SVN-Revision: 32856
Florian Fainelli [Wed, 25 Jul 2012 15:50:13 +0000 (15:50 +0000)]
[octeon] move i2c driver to target modules.mk
SVN-Revision: 32855
Florian Fainelli [Wed, 25 Jul 2012 15:50:10 +0000 (15:50 +0000)]
[ar71xx] move watchdog driver to target specific modules.mk
SVN-Revision: 32854
Florian Fainelli [Wed, 25 Jul 2012 15:50:04 +0000 (15:50 +0000)]
[ar71xx] move target specific spi modules
SVN-Revision: 32853
Florian Fainelli [Wed, 25 Jul 2012 15:50:02 +0000 (15:50 +0000)]
[ar71xx] move target specific leds modules to ar71xx modules.mk
SVN-Revision: 32852
Florian Fainelli [Wed, 25 Jul 2012 15:49:57 +0000 (15:49 +0000)]
[x86] move leds modules back to target modules.mk
SVN-Revision: 32851
Florian Fainelli [Wed, 25 Jul 2012 15:49:54 +0000 (15:49 +0000)]
[x86] move i2c modules back to target modules.mk
SVN-Revision: 32850
Florian Fainelli [Wed, 25 Jul 2012 15:49:52 +0000 (15:49 +0000)]
[package] fix network devices modules to depend on PCI instead of x86
SVN-Revision: 32849
Florian Fainelli [Wed, 25 Jul 2012 15:49:49 +0000 (15:49 +0000)]
[x86] move more x86-specific modules back to target modules.mk
SVN-Revision: 32848
Florian Fainelli [Wed, 25 Jul 2012 15:49:46 +0000 (15:49 +0000)]
[package] fix libsas and mvsas dependencies against PCI and not x86
SVN-Revision: 32847
Florian Fainelli [Wed, 25 Jul 2012 15:49:42 +0000 (15:49 +0000)]
[x86] move x86 specific ide/pata modules to x86' modules.mk
SVN-Revision: 32846
Hauke Mehrtens [Wed, 25 Jul 2012 14:52:00 +0000 (14:52 +0000)]
brcm47xx: reorder patches so that the patches already in mainline linux will be applied at first.
SVN-Revision: 32845
Florian Fainelli [Wed, 25 Jul 2012 14:01:57 +0000 (14:01 +0000)]
[kernel] add yet another framebuffer symbol
SVN-Revision: 32844
Florian Fainelli [Wed, 25 Jul 2012 14:01:54 +0000 (14:01 +0000)]
[package] split framebuffer helper modules to their own packages
SVN-Revision: 32843
Florian Fainelli [Wed, 25 Jul 2012 14:01:51 +0000 (14:01 +0000)]
[cobalt] remove broken flag
SVN-Revision: 32842
Florian Fainelli [Wed, 25 Jul 2012 14:01:49 +0000 (14:01 +0000)]
[cobalt] package buttons driver separately
SVN-Revision: 32841
Florian Fainelli [Wed, 25 Jul 2012 14:01:46 +0000 (14:01 +0000)]
[cobalt] package cobalt lcd as a module
SVN-Revision: 32840
John Crispin [Wed, 25 Jul 2012 10:34:06 +0000 (10:34 +0000)]
[include] use autoreconf hook instead of manual call
SVN-Revision: 32837
John Crispin [Wed, 25 Jul 2012 09:05:23 +0000 (09:05 +0000)]
[kernel] add unset CONFIG_FB_XGI to fix fullbuilds
SVN-Revision: 32836
John Crispin [Wed, 25 Jul 2012 09:05:18 +0000 (09:05 +0000)]
[brcm2708] cleanup config-3.3, remove =m
SVN-Revision: 32835
John Crispin [Wed, 25 Jul 2012 08:01:38 +0000 (08:01 +0000)]
[cns3xx] laguna: fix eeprom read buffer size during platform configuration
Increase the size of the buffer used for eeprom reads during the platform configuration of the Gateworks laguna. The model name read in is 16 bytes but the original buffer was only 8 bytes.
Signed-off-by: David Acker <dacker@rajant.com>
SVN-Revision: 32833
John Crispin [Tue, 24 Jul 2012 23:07:35 +0000 (23:07 +0000)]
[compcache] fixes build for 3.x kernel and remove old 2.6.x references
Signed-off-by: christoph.thielecke@gmx.de
SVN-Revision: 32832
John Crispin [Tue, 24 Jul 2012 23:07:30 +0000 (23:07 +0000)]
[include] package-version-override always calls autoreconf
make it conditional on the existance of autoreconf
Signed-off-by: Ryan Nowakowski <tubaman@fattuba.com>
SVN-Revision: 32831
John Crispin [Tue, 24 Jul 2012 23:07:25 +0000 (23:07 +0000)]
mac80211/hostapd: add support for HT capa in case of IBSS/RSN
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
SVN-Revision: 32830
John Crispin [Tue, 24 Jul 2012 23:07:15 +0000 (23:07 +0000)]
wpa_supplicant: add more parameters
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
SVN-Revision: 32829
John Crispin [Tue, 24 Jul 2012 23:07:10 +0000 (23:07 +0000)]
hostapd: add pending patches
add patched needed to pass more parameters to the IBSS JOIN command
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
SVN-Revision: 32828
John Crispin [Tue, 24 Jul 2012 20:39:17 +0000 (20:39 +0000)]
[brcm2708] adds target used by rapsberry pi
Add support for Raspberry Pi / brcm2708 / 2835
Signed-off-by: Ian Ridge <ianridge [at] gmail.com>
SVN-Revision: 32825
John Crispin [Tue, 24 Jul 2012 20:39:00 +0000 (20:39 +0000)]
[tools] add mktools and dosfstools which are needed for the raspberry pi
Signed-off-by: Ian Ridge <ianridge [at] gmail.com>
SVN-Revision: 32824
John Crispin [Tue, 24 Jul 2012 20:38:55 +0000 (20:38 +0000)]
[ramips] DWC otg usb: compilation fixes and trivial bugfix in slave mode
Signed-of-by: Nikolai Zhubr <n-a-zhubr@yandex.ru>
SVN-Revision: 32823
John Crispin [Tue, 24 Jul 2012 20:38:49 +0000 (20:38 +0000)]
[tools] adds mkdapimg
Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>
SVN-Revision: 32822
John Crispin [Tue, 24 Jul 2012 20:38:43 +0000 (20:38 +0000)]
[ramips] D-Link DAP-1350 initial support
The initial support for the D-Link DAP-1350.
USB related functionality is not tested.
Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>
SVN-Revision: 32821
John Crispin [Tue, 24 Jul 2012 20:38:36 +0000 (20:38 +0000)]
[ixp4xx] MI424WR - add rev D support
Add support for revision D of the MI424WR.
Rev D swaps LAN & WAN ports so this patch maintains
eth0 for LAN and eth1 for WAN. For details on rev D usage,
see http://wiki.openwrt.org/toh/actiontec/mi424wr
Signed-off-by: Jose Vasconcellos <jvasco@verizon.net>
SVN-Revision: 32820
John Crispin [Tue, 24 Jul 2012 20:38:31 +0000 (20:38 +0000)]
[ramips] initial LED configuration for Fonera 2.0n
Setup initial configuration for Wifi and USB LEDS of a Fonera 2.0n (ramips)
Signed-off-by: Malte Forkel <malte.forkel@berlin.de>
SVN-Revision: 32819
John Crispin [Tue, 24 Jul 2012 20:38:26 +0000 (20:38 +0000)]
[mountd] ext4 support
This patch adds the ext4 filesystem support to mountd. Tested with ext2, ext3
and ext4 partitions.
Signed-off-by: Jaroslaw Swierczynski <jarek1701@gmail.com>
SVN-Revision: 32818
John Crispin [Tue, 24 Jul 2012 20:38:20 +0000 (20:38 +0000)]
[mac80211] add support for Rt3352 in rt2x00 driver
Forgot to do make package/mac80211/update, so the previously posted patch wasn't
in sync with compat-wireless. Now fixed.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 32817
John Crispin [Tue, 24 Jul 2012 20:38:14 +0000 (20:38 +0000)]
[ramips] add ALL5002 userspace support
detect EEPROM, MAC addresses and support sysupgrade for the ALL5002
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 32816
John Crispin [Tue, 24 Jul 2012 20:38:08 +0000 (20:38 +0000)]
[ramips] enable OHCI/EHCI glue on Rt305x, so it is available for Rt3352F.
Hope that this works, didn't have a chance to actually test it...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 32815
John Crispin [Tue, 24 Jul 2012 20:38:03 +0000 (20:38 +0000)]
[ramips] add image build for ALL5002
add image build for ALL5002
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 32814
John Crispin [Tue, 24 Jul 2012 20:37:56 +0000 (20:37 +0000)]
[ramips] add support for Allnet ALL5002 to kernel
support ALL5002 in ramips/rt305x branch of the kernel.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 32813
John Crispin [Tue, 24 Jul 2012 20:37:50 +0000 (20:37 +0000)]
[ramips] uart_clk on Rt3352F is always 40MHz
Currently, sys_clk/10 is used which is just wrong.
cpu_clk/10 would work for systems with 400MHz CPU clock.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 32812
Florian Fainelli [Tue, 24 Jul 2012 19:43:58 +0000 (19:43 +0000)]
[package] orion_wdt is also available on kirkwood
SVN-Revision: 32811
Florian Fainelli [Tue, 24 Jul 2012 19:43:54 +0000 (19:43 +0000)]
[omap24xx] move omap specific modules to modules.mk
SVN-Revision: 32810
Florian Fainelli [Tue, 24 Jul 2012 19:43:49 +0000 (19:43 +0000)]
[omap24x] move n810 battery module to omap24 modules.mk
SVN-Revision: 32809
projects / openwrt / svn-archive / archive.git / log