drm/i915/dsi: Do not clear DPOUNIT_CLOCK_GATE_DISABLE from vlv_init_display_clock_gating

On my Cherrytrail CUBE iwork8 Air tablet PIPE-A would get stuck on loading
i915 at boot 1 out of every 3 boots, resulting in a non functional LCD.
Once the i915 driver has successfully loaded, the panel can be disabled /
enabled without hitting this issue.

The getting stuck is caused by vlv_init_display_clock_gating() clearing
the DPOUNIT_CLOCK_GATE_DISABLE bit in DSPCLK_GATE_D when called from
chv_pipe_power_well_ops.enable() on driver load, while a pipe is enabled
driving the DSI LCD by the BIOS.

Clearing this bit while DSI is in use is a known issue and
intel_dsi_pre_enable() / intel_dsi_post_disable() already set / clear it
as appropriate.

This commit modifies vlv_init_display_clock_gating() to leave the
DPOUNIT_CLOCK_GATE_DISABLE bit alone fixing the pipe getting stuck.

Changes in v2:
-Replace PIPE-A with "a pipe" or "the pipe" in the commit msg and
comment

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97330
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161202142904.25613-1-hdegoede@redhat.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit 721d484563e1a51ada760089c490cbc47e909756)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: drop the struct_mutex when wedged or trying to reset

We grab the struct_mutex in intel_crtc_page_flip, but if we are wedged
or a reset is in progress we bail early but never seem to actually
release the lock.

Fixes: 7f1847ebf48b ("drm/i915: Simplify checking of GPU reset_counter in display pageflips")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161128103648.9235-1-matthew.auld@intel.com
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: <stable@vger.kernel.org> # v4.7+
(cherry picked from commit ddbb271aea87fc6004d3c8bcdb0710e980c7ec85)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit e411072d5740a49cdc9d0713798c30440757e451)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Move priority bumping for flips earlier

David found another issue with priority bumping from mmioflips, where we
are accessing the requests concurrently to them being retired and freed.
Whilst we are skipping the dependency if has been submitted, that is not
sufficient to stop the dependency from disappearing if another thread
retires that request. To prevent we can either employ the struct_mutex (or a
request mutex in the future) to serialise retiring before it is freed.
Alternatively, we need to keep the dependencies alive using RCU whilst
they are being accessed via the DFS.

[ 1746.698111] general protection fault: 0000 [#1] PREEMPT SMP
[ 1746.698305] Modules linked in: snd_hda_intel snd_hda_codec snd_hwdep x86_pkg_temp_thermal snd_hda_core coretemp crct10dif_pclmul crc32_pclmul snd_pcm ghash_clmulni_intel mei_me mei i915 e1000e ptp pps_core i2c_hid
[ 1746.698750] CPU: 1 PID: 6716 Comm: kworker/u8:2 Not tainted 4.9.0-rc6-CI-Nightly_816+ #1
[ 1746.698871] Hardware name: GIGABYTE GB-BKi7A-7500/MFLP7AP-00, BIOS F1 07/27/2016
[ 1746.699125] Workqueue: events_unbound intel_mmio_flip_work_func [i915]
[ 1746.699266] task: ffff880260a5e800 task.stack: ffffc90000f6c000
[ 1746.699361] RIP: 0010:[<ffffffffa006595d>]  [<ffffffffa006595d>] execlists_schedule+0x8d/0x300 [i915]
[ 1746.699632] RSP: 0018:ffffc90000f6fcd8  EFLAGS: 00010206
[ 1746.699724] RAX: dead0000000000f8 RBX: ffff8801f64b2bf0 RCX: ffff8801f64b2c10
[ 1746.699842] RDX: dead000000000100 RSI: 0000000000000000 RDI: ffff8801f64b0458
[ 1746.699972] RBP: ffffc90000f6fd68 R08: ffff88026488dc00 R09: 0000000000000002
[ 1746.700090] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000400
[ 1746.700195] R13: ffffc90000f6fcf0 R14: ffff88020955aa40 R15: ffff88020955aa68
[ 1746.700307] FS:  0000000000000000(0000) GS:ffff88026dc80000(0000) knlGS:0000000000000000
[ 1746.700435] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1746.700532] CR2: 0000000002a69e90 CR3: 0000000002c07000 CR4: 00000000003406e0
[ 1746.700635] Stack:
[ 1746.700682]  ffff880260a5e880 ffffc90000f6fd50 ffffffff810af69a ffffc90000f6fd28
[ 1746.700827]  ffff88020955a628 ffff8801e1eaebf0 0000000000000020 0000000000000000
[ 1746.700947]  00000196af1edc96 ffff88025dfa4000 ffff8801f0b030a8 ffffc90000f6fcf0
[ 1746.701071] Call Trace:
[ 1746.701117]  [<ffffffff810af69a>] ? dequeue_entity+0x25a/0xb50
[ 1746.701260]  [<ffffffffa00516be>] fence_set_priority+0x7e/0x80 [i915]
[ 1746.701406]  [<ffffffffa0051a15>] i915_gem_object_wait_priority+0x85/0x160 [i915]
[ 1746.701599]  [<ffffffffa008ccd7>] intel_mmio_flip_work_func+0x47/0x2b0 [i915]
[ 1746.701717]  [<ffffffff81094c4d>] process_one_work+0x14d/0x470
[ 1746.701809]  [<ffffffff81094fb3>] worker_thread+0x43/0x4e0
[ 1746.701888]  [<ffffffff81094f70>] ? process_one_work+0x470/0x470
[ 1746.701969]  [<ffffffff81094f70>] ? process_one_work+0x470/0x470
[ 1746.702072]  [<ffffffff8109a4d5>] kthread+0xc5/0xe0
[ 1746.702152]  [<ffffffff81771c59>] ? _raw_spin_unlock_irq+0x9/0x10
[ 1746.702234]  [<ffffffff8109a410>] ? kthread_park+0x60/0x60
[ 1746.702318]  [<ffffffff81772272>] ret_from_fork+0x22/0x30
[ 1746.702387] Code: 89 42 08 48 8b 45 88 48 89 55 c0 4c 89 6d c8 4c 8d 70 d8 4d 8d 7e 28 4d 39 ef 74 72 49 8b 1e 48 8b 13 48 39 d3 48 8d 42 f8 74 3e <48> 8b 10 8b 52 38 41 39 d4 7e 26 48 8b 50 30 48 8b 78 28 48 8d
[ 1746.702921] RIP  [<ffffffffa006595d>] execlists_schedule+0x8d/0x300 [i915]
Nov 25 21:42:54 kbl-gbbki7 kernel: [ 1746.703027]  RSP <ffffc90000f6fcd8>

Fixes: 27745e829a5c ("drm/i915/execlists: Use a local lock for dfs_link access")
Fixes: 9a151987d709 ("drm/i915: Add execution priority boosting for mmioflips")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161128143649.4289-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
(cherry picked from commit 92117f0bce64268b841261774e45462cc7ff80af)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Hold a reference on the request for its fence chain

Currently, we have an active reference for the request until it is
retired. Though it cannot be retired before it has been executed by
hardware, the request may be completed before we have finished
processing the execute fence, i.e. we may continue to process that fence
as we free the request.

Fixes: 5590af3e115a ("drm/i915: Drive request submission through fence callbacks")
Fixes: 23902e49c999 ("drm/i915: Split request submit/execute phase into two")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161125131718.20978-3-chris@chris-wilson.co.uk
(cherry picked from commit 48bc2a4a427ad81578f887d71d45794619a77211)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/audio: fix hdmi audio noise issue

Some monitors will have noise or even no sound after
applying the patch 6014ac12.

In patch 6014ac12, it will reset the cts value to 0 for HDMI.
However, we need to disable Enable CTS or M Prog bit. This is
the initial setting after HW reset.

Fixes: 6014ac122ed0 ("drm/i915/audio: set proper N/M in modeset")
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478853988-139842-1-git-send-email-libin.yang@intel.com
(cherry picked from commit 60abfbb86a8d51576f90c5adcbb4f547a2952782)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/debugfs: Increment return value of gt.next_seqno

The i915_next_seqno read value is to be the next seqno used by the
kernel. However, in the conversion to atomics ops for gt.next_seqno, in
commit 28176ef4cfa5 ("drm/i915: Reserve space in the global seqno during
request allocation"), this was changed from a post-increment to a
pre-increment. This increment was missed from the value reported by
debugfs, so in effect it was reporting the current seqno (last
assigned), not the next seqno.

Fixes: 28176ef4cfa5 ("drm/i915: Reserve space in the global seqno during request allocation")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=81209
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161124094752.19129-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit 9607ae79710afb453173b90d5bf564788a6e09b1)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/debugfs: Drop i915_hws_info

i915_hws_info() has not been kept upto date (missing new engines) and so
I consider it to be unused. HWS is included in the error state, which
would be an avenue to retrieving it if required in future (possibly via
i915_engine_info). As it is currently oopsing with an rpm testcase, just
remove it.

Fixes: 3b3f1650b1ca ("drm/i915: Allocate intel_engine_cs structure only for the enabled engines")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98838
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161124093401.18852-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
(cherry picked from commit 30576a2c462d9658508c3de67601aa565f973064)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Initialize dev_priv->atomic_cdclk_freq at init time

Looks like we're only initializing dev_priv->atomic_cdclk_freq
at resume and commit times, not at init time. Let's do that as
well.

We're now hitting the 'WARN_ON(intel_state->cdclk == 0)' in
hsw_compute_linetime_wm() on account of populating
intel_state->cdclk from dev_priv->atomic_cdclk_freq.
Previously we were mispopulating intel_state->cdclk with
dev_priv->cdclk_freq which always had a proper value at init
time and hence the WARN_ON() didn't trigger.

Cc: <stable@vger.kernel.org> # 4.6+: 14676ec6b1a6 drm/i915: Fix cdclk vs. dev_cdclk mess when not recomputing things
Cc: <stable@vger.kernel.org> # 4.6+
Cc: Matthew Auld <matthew.auld@intel.com>
Reported-by: Matthew Auld <matthew.auld@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98902
Fixes: 14676ec6b1a6 ("drm/i915: Fix cdclk vs. dev_cdclk mess when not recomputing things")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480428837-4207-1-git-send-email-ville.syrjala@linux.intel.com
Tested-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
(cherry picked from commit 6a259b1f8a9e99b1ed114f8bf8b0cfccee130e54)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Fix cdclk vs. dev_cdclk mess when not recomputing things

When we end up not recomputing the cdclk, we need to populate
intel_state->cdclk with the "atomic_cdclk_freq" instead of the
current cdclk_freq. When no pipes are active, the actual cdclk_freq
may be lower than what the configuration of the planes and
pipes would require from the point of view of the software state.

This fixes bogus WARNS from skl_max_scale() which is trying to check
the plane software state against the cdclk frequency. So any time
it got called during DPMS off for instance, we might have tripped
the warn if the current mode would have required a higher than
minimum cdclk.

v2: Drop the dev_cdclk stuff (Maarten)

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: bruno.pagani@ens-lyon.org
Cc: Daniel J Blueman <daniel.blueman@gmail.com>
Cc: Paul Bolle <pebolle@tiscali.nl>
Cc: Joseph Yasi <joe.yasi@gmail.com>
Tested-by: Paul Bolle <pebolle@tiscali.nl>
Tested-by: Joseph Yasi <joe.yasi@gmail.com> (v1)
Cc: <stable@vger.kernel.org> # v4.6+
Fixes: 1a617b77658e ("drm/i915: Keep track of the cdclk as if all crtc's were active.")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98214
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479141311-11904-2-git-send-email-ville.syrjala@linux.intel.com
(cherry picked from commit e0ca7a6be38ce603d26df5707c22e53870a623e0)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Make skl_write_{plane,cursor}_wm() static

Someone forgot to make skl_write_{plane,cursor}_wm() static when
removing the prototypes from the header. Sparse isn't pleased.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Lyude <cpaul@redhat.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Fixes: e62929b3f628 ("drm/i915/gen9+: Program watermarks as a separate step during evasion, v3.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479846113-24745-1-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Lyude <lyude@redhat.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
(cherry picked from commit d9348dec902ff36e0f1b25ccf1f4be25fc1ac409)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Complete requests in nop_submit_request

Since the submit/execute split in commit d55ac5bf97c6 ("drm/i915: Defer
transfer onto execution timeline to actual hw submission") the
global seqno advance was deferred until the submit_request callback.
After wedging the GPU, we were installing a nop_submit_request handler
(to avoid waking up the dead hw) but I had missed converting this over
to the new scheme. Under the new scheme, we have to explicitly call
i915_gem_submit_request() from the submit_request handler to mark the
request as on the hardware. If we don't the request is always pending,
and any waiter will continue to wait indefinitely and hangcheck will not
be able to resolve the lockup.

References: https://bugs.freedesktop.org/show_bug.cgi?id=98748
Testcase: igt/gem_eio/in-flight
Fixes: d55ac5bf97c6 ("drm/i915: Defer transfer onto execution timeline to actual hw submission")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161122144121.7379-3-chris@chris-wilson.co.uk
(cherry picked from commit 3dcf93f7f23a61e867a5ccadaf651cb2d29229fd)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge tag 'gvt-next-2016-11-30' of https://github.com/01org/gvt-linux into drm-intel-next-fixes

From Zhenyu Wang <zhenyuw@linux.intel.com>

gvt-next-2016-11-30

- initialize vgpu as primary for correct cfg space setting
- fix 64 bit bar emulation
- fix un-released lock issue on dispatch workload err path

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/gvt: fix lock not released bug for dispatch_workload() err path

Need to be careful to release struct_mutext when request alloc
failed and take consistent handling for return status as with
normal go out path. Ensure to check correct workload request in
complete path too.

v2: Add Fixes note

Fixes: 90d27a1b180e ("drm/i915/gvt: fix deadlock in workload_thread")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Pei Zhang <pei.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: fix getting 64bit bar size error

For 64bit bar while reading the higher 32bit the value should be returned
directly.

In the current implementation the higher 32bit value was discarded and not
written to the cfg space of vgpu which lead to an incorrect bar size.

Signed-off-by: Xiaoguang Chen <xiaoguang.chen@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: fix missing init param.primary

Initiate param.primary to 1. We should be primary currently.

Signed-off-by: Du, Changbin <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915: Update DRIVER_DATE to 20161121

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Skip final clflush if LLC is coherent

If the LLC is coherent with the object, we do not need to worry about
whether main memory and cache mismatch when we hand the object back to
the system.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161118211747.25197-2-chris@chris-wilson.co.uk

drm/i915: Always flush the dirty CPU cache when pinning the scanout

Currently we only clflush the scanout if it is in the CPU domain. Also
flush if we have a pending CPU clflush. We also want to treat the
dirtyfb path similar, and flush any pending writes there as well.

v2: Only send the fb flush message if flushing the dirt on flip
v3: Make flush-for-flip and dirtyfb look more alike since they serve
similar roles as end-of-frame marker.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> #v2
Link: http://patchwork.freedesktop.org/patch/msgid/20161118211747.25197-1-chris@chris-wilson.co.uk

drm/i915: Don't touch NULL sg on i915_gem_object_get_pages_gtt() error

On the DMA mapping error path, sg may be NULL (it has already been
marked as the last scatterlist entry), and we should avoid dereferencing
it again.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: e227330223a7 ("drm/i915: avoid leaking DMA mappings")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Cc: stable@vger.kernel.org
Link: http://patchwork.freedesktop.org/patch/msgid/20161114112930.2033-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>

drm/i915: Check that each request phase is completed before retiring

Trying to chase an impossible bug (ivb):

[  207.765411] [drm:i915_reset_and_wakeup [i915]] resetting chip
[  207.765734] [drm:i915_gem_reset [i915]] resetting render ring to restart from tail of request 0x4ee834
[  207.765791] [drm:intel_print_rc6_info [i915]] Enabling RC6 states: RC6 on RC6p on RC6pp off
[  207.767213] [drm:intel_guc_setup [i915]] GuC fw status: path (null), fetch NONE, load NONE
[  207.767515] kernel BUG at drivers/gpu/drm/i915/i915_gem_request.c:203!
[  207.767551] invalid opcode: 0000 [#1] PREEMPT SMP
[  207.767576] Modules linked in: snd_hda_intel i915 cdc_ncm usbnet mii x86_pkg_temp_thermal coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel lpc_ich snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec snd_hwdep snd_hda_core mei_me mei snd_pcm sdhci_pci sdhci mmc_core e1000e ptp pps_core [last unloaded: i915]
[  207.767808] CPU: 3 PID: 8855 Comm: gem_ringfill Tainted: G     U          4.9.0-rc5-CI-Patchwork_3052+ #1
[  207.767854] Hardware name: LENOVO 2356GCG/2356GCG, BIOS G7ET31WW (1.13 ) 07/02/2012
[  207.767894] task: ffff88012c82a740 task.stack: ffffc9000383c000
[  207.767927] RIP: 0010:[<ffffffffa00a0a3a>]  [<ffffffffa00a0a3a>] i915_gem_request_retire+0x2a/0x4b0 [i915]
[  207.767999] RSP: 0018:ffffc9000383fb20  EFLAGS: 00010293
[  207.768027] RAX: 00000000004ee83c RBX: ffff880135dcb480 RCX: 00000000004ee83a
[  207.768062] RDX: ffff88012fea42a8 RSI: 0000000000000001 RDI: ffff88012c82af68
[  207.768095] RBP: ffffc9000383fb48 R08: 0000000000000000 R09: 0000000000000000
[  207.768129] R10: 0000000000000000 R11: 0000000000000000 R12: ffff880135dcb480
[  207.768163] R13: ffff88012fea42a8 R14: 0000000000000000 R15: 00000000000001d8
[  207.768200] FS:  00007f955f658740(0000) GS:ffff88013e2c0000(0000) knlGS:0000000000000000
[  207.768239] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  207.768258] CR2: 0000555899725930 CR3: 00000001316f6000 CR4: 00000000001406e0
[  207.768286] Stack:
[  207.768299]  ffff880135dcb480 ffff880135dcbe00 ffff88012fea42a8 0000000000000000
[  207.768350]  00000000000001d8 ffffc9000383fb70 ffffffffa00a1339 0000000000000000
[  207.768402]  ffff88012f296c88 00000000000003f0 ffffc9000383fbb0 ffffffffa00b582d
[  207.768453] Call Trace:
[  207.768493]  [<ffffffffa00a1339>] i915_gem_request_retire_upto+0x49/0x90 [i915]
[  207.768553]  [<ffffffffa00b582d>] intel_ring_begin+0x15d/0x2d0 [i915]
[  207.768608]  [<ffffffffa00b59cb>] intel_ring_alloc_request_extras+0x2b/0x40 [i915]
[  207.768667]  [<ffffffffa00a2fd9>] i915_gem_request_alloc+0x359/0x440 [i915]
[  207.768723]  [<ffffffffa008bd03>] i915_gem_do_execbuffer.isra.15+0x783/0x1a10 [i915]
[  207.768766]  [<ffffffff811a6a2e>] ? __might_fault+0x3e/0x90
[  207.768816]  [<ffffffffa008d380>] i915_gem_execbuffer2+0xc0/0x250 [i915]
[  207.768854]  [<ffffffff815532a6>] drm_ioctl+0x1f6/0x480
[  207.768900]  [<ffffffffa008d2c0>] ? i915_gem_execbuffer+0x330/0x330 [i915]
[  207.768939]  [<ffffffff81202f6e>] do_vfs_ioctl+0x8e/0x690
[  207.768972]  [<ffffffff818193ac>] ? retint_kernel+0x2d/0x2d
[  207.769004]  [<ffffffff810d6ef2>] ? trace_hardirqs_on_caller+0x122/0x1b0
[  207.769039]  [<ffffffff812035ac>] SyS_ioctl+0x3c/0x70
[  207.769068]  [<ffffffff818189ae>] entry_SYSCALL_64_fastpath+0x1c/0xb1
[  207.769103] Code: 90 55 48 89 e5 41 57 41 56 41 55 41 54 49 89 fc 53 8b 35 fa 7b e1 e1 85 f6 0f 85 55 03 00 00 41 8b 84 24 80 02 00 00 85 c0 75 02 <0f> 0b 49 8b 94 24 a8 00 00 00 48 8b 8a e0 01 00 00 8b 89 c0 00
[  207.769400] RIP  [<ffffffffa00a0a3a>] i915_gem_request_retire+0x2a/0x4b0 [i915]
[  207.769463]  RSP <ffffc9000383fb20>

Let's add a couple more BUG_ONs before this to ascertain that the request
did make it to hardware. The impossible part of this stacktrace is that
request must have been considered completed by the i915_request_wait()
before we tried to retire it.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161118143412.26508-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>

drm/i915: i915_pages_create_for_stolen should return err ptr

When gathering the pages from our backing storage we expect get_pages()
to either give us our sg_table or an err ptr. However when gathering our
fake pages for stolen memory we may return NULL in the event of a
failure. To prevent any funny business we should therefore return the
proper err ptr value.

Fixes: 03ac84f1830e ("drm/i915: Pass around sg_table to get_pages/put_pages backend")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479488536-6168-1-git-send-email-matthew.auld@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Enable support for nonblocking modeset

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478609742-13603-12-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> #irc

drm/i915: Be more careful to drop the GT wakeref

Since we can retire requests from multiple paths, we cannot assume that
i915_gem_retire_requests() is the sole path on which we can transition
to gt.active_requests == 0. A consequence of this is that we would skip
the function if we had already retired all the requests and not
scheduled the idle worker.

This is fallout from changing the routine from considering active_engines
(for which it was the only consumer) to active_requests.

v2: Move kicking the idle working to i915_gem_request_retire() otherwise
we could postpone the idle callback everytime we called retire_requests
even though we did no work.
v3: We only need to move the idle work kicking!
v4: Drop the BUG_ON(!awake) as we may be called from the shrinker in the
middle of constructing a request before we have marked the device awake.
v5: Add a BUG_ON() for active_requests underflow upon retirement (Joonas)

Fixes: 28176ef4cfa5 ("drm/i915: Reserve space in the global seqno during request allocation")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161115164620.17185-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Move frontbuffer CS write tracking from ggtt vma to object

I tried to avoid having to track the write for every VMA by only
tracking writes to the ggtt. However, for the purposes of frontbuffer
tracking this is insufficient as we need to invalidate around writes not
just to the the ggtt but all aliased ppgtt views of the framebuffer. By
moving the critical section to the object and only doing so for
framebuffer writes we can reduce the tracking even further by only
watching framebuffers and not vma.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161116190704.5293-1-chris@chris-wilson.co.uk
Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Only dump dp_m2_n2 configuration when drrs is used

Otherwise it is just an useless empty line.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479397449-27085-1-git-send-email-tvrtko.ursulin@linux.intel.com

drm/i915: don't leak global_timeline

We need to clean up the global_timeline in i915_gem_load_cleanup.

v2: don't forget about the struct_mutex, and also WARN_ON if we have any
remaining timelines before purging the global_timeline.

v3: it might be a good idea to first remove the global_timeline...duh!

Fixes: 73cb97010d4f ("drm/i915: Combine seqno + tracking into a global timeline struct")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1479415087-13216-1-git-send-email-matthew.auld@intel.com
Link: http://patchwork.freedesktop.org/patch/msgid/20161117210411.14044-2-chris@chris-wilson.co.uk

drm/i915: add i915_address_space_fini

We already have an i915_address_space_init, so for symmetry we should
also have a _fini, plus we already open code it twice. This then also
fixes a bug where we leak the timeline for the ggtt vm.

v2: don't forget about the struct_mutex for the ggtt path.

Fixes: 80b204bce8f2 ("drm/i915: Enable multiple timelines")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20161117210411.14044-1-chris@chris-wilson.co.uk

drm/i915: Add a few more sanity checks for stolen handling

We should never be called via obj->ops->release() on anything other than
a fully formed stolen object, so raise that to an assert. In the process
tidy up a comment and variable no longer used outside of a conditional
BUG.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20161117155846.4631-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>

drm/i915: Waterproof verification of gen9 forcewake table ranges

We have to make sure there are no holes in the table in Gen9.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1479388435-12062-1-git-send-email-tvrtko.ursulin@linux.intel.com

drm/i915: Introduce enableddisabled helper

Similar to existing yesno and onoff and use it throughout the code.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479385814-2358-2-git-send-email-tvrtko.ursulin@linux.intel.com

drm/i915: Only dump possible panel fitter config for the platform

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: Only dump scaler config where supported

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: Compact a few pipe config debug lines

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: Don't log pipe config kernel pointer and duplicated pipe name

Kernel pointer does not sound like an useful thing to log and
pipe name is already contained in the crtc name.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: Dump FDI config only where applicable

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: Extract intel_link_m_n config printing into a helper

And also only dump DP config for crtcs with DP encoders.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: Remove stolen object spam

We don't spam the debug when we create a normal object, nor when we
allocate their pages. Yet we do for stolen objects, and since these are
quite frequently used (at least once per context), the resulting spam
floods the dmesg in CI.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: Demote i915_gem_open() debugging from DRIVER to USER

We use DRM_DEBUG() when reporting on user actions, to try and keep
intentional errors out of the CI dmesg. Demote the debug from
i915_gem_open() similarly so that it is only apparent with drm.debug & 1
like its brethren.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20161109104507.21228-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: Make scaler updates less chatty

It looks to me skl_update_scaler will already log interesting
debug messages when the state transitions or there is an error.

In this case it feels we can remove the two unconditional
debug messages which happen immediately before calling
skl_update_scaler. This way we get rid of the sole debug
message when switching virtual terminals for example.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479376805-5087-1-git-send-email-tvrtko.ursulin@linux.intel.com

drm/i915: Remove __I915__ magic macro

And at the same time introduce a static inline helper for
more type safety.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1479286545-15020-2-git-send-email-tvrtko.ursulin@linux.intel.com

drm/i915: Fix for_each_pipe argument in vlv_display_power_well_init

Macro takes dev_priv and not dev.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: dev_priv cleanup in intel_display.c

v2: Rebase.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: dev_priv cleanup in intel_pm.c

Plus a trickle of function prototype changes.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: dev_priv cleanup in intel_dp.c

And as usual a little bit of cascaded function prototype changes.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Assorted INTEL_INFO(dev) cleanups

A bunch of source files with just a few instances of the
incorrect INTEL_INFO use.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: dev_priv cleanup in i915_suspend.c

And a little bit of function prototype changes.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: dev_priv cleanup in i915_irq.c

And a little bit of function prototype changes.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: dev_priv cleanup in i915_gpu_error.c

And a little bit of cascaded function prototype changes.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: dev_priv cleanup in i915_gem_tiling.c

And a little bit of cascaded function prototype changes.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: dev_priv cleanup in i915_gem_stolen.c

And a little bit of cascaded function prototype changes.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: dev_priv cleanup in i915_gem_gtt.c

Started with removing INTEL_INFO(dev) and cascaded into a quite
big trickle of function prototype changes. Still, I think it is
for the better.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Use dev_priv in INTEL_INFO in i915_gem_fence_reg.c

Plus a small cascade of function prototype changes.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Use dev_priv in INTEL_INFO in i915_gem_execbuffer.c

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: dev_priv and a small cascade of cleanups in i915_gem.c

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

Merge tag 'gvt-next-2016-11-17' of https://github.com/01org/gvt-linux into drm-intel-next-queued

From Zhenyu Wang:

gvt-next-2016-11-17

- Fix lock order issue found in guest stress test
- Fix several MMIO handlers to correct behavior
- Fix crash for vgpu execlist reset and memleak
- Fix a possible conflict for unresolved vfio mdev dependency
- other misc fixes

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

Merge remote-tracking branch 'airlied/drm-next' into drm-intel-next-queued

Tvrtko needs

commit b3c11ac267d461d3d597967164ff7278a919a39f
Author: Eric Engestrom <eric@engestrom.ch>
Date:   Sat Nov 12 01:12:56 2016 +0000

    drm: move allocation out of drm_get_format_name()

to be able to apply his patches without conflicts.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

drm/i915: Fix gen9 forcewake range table

Commit 0dd356bb6ff5 ("drm/i915: Eliminate Gen9 special case")
accidentaly dropped a MMIO range between 0xc000 to 0xcfff out
of the blitter forcewake domain. Fix it.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 0dd356bb6ff5 ("drm/i915: Eliminate Gen9 special case")
Reported-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1479373363-16528-1-git-send-email-tvrtko.ursulin@linux.intel.com

drm/i915/opregion: fill in the CADL from connector list, not DIDL

This is essentially the same thing as duplicating DIDL now that the
connector list has the ACPI device IDs.

Cc: Peter Wu <peter@lekensteyn.nl>
Cc: Rainer Koenig <Rainer.Koenig@ts.fujitsu.com>
Cc: Jan-Marek Glogowski <glogow@fbihome.de>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Cc: Paolo Stivanin <paolostivanin@fastmail.fm>
Tested-by: Rainer Koenig <Rainer.Koenig@ts.fujitsu.com>
Tested-by: Paolo Stivanin <paolostivanin@fastmail.fm>
Tested-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/ea0a052fa99a4cb56b559a815866434bcfef853d.1479295490.git.jani.nikula@intel.com

drm/i915: make i915 the source of acpi device ids for _DOD

The graphics driver is supposed to define the DIDL, which are used for
_DOD, not the BIOS. Restore that behaviour.

This is basically a revert of

commit 3143751ff51a163b77f7efd389043e038f3e008e
Author: Zhang Rui <rui.zhang@intel.com>
Date:   Mon Mar 29 15:12:16 2010 +0800

    drm/i915: set DIDL using the ACPI video output device _ADR method return.

which went out of its way to cater to a specific BIOS, setting up DIDL
based on _ADR method. Perhaps that approach worked on that specific
machine, but on the machines I checked the _ADR method invents the
device identifiers out of thin air if DIDL has not been set. The source
for _ADR is also supposed to be the DIDL set by the driver, not the
other way around.

With this, we'll also limit the number of outputs to what the driver
actually has.

A side effect of this change is that the DIDL, and by proxy CADL, will
be initialized in the order of the connector list. That, in turn, has
internal panels in front, ensuring they're included in the DIDL and CADL
lists. Hopefully this ensures the BIOS does not block backlight hotkey
events, thinking the internal panel is off.

v2: do not set ACPI_DEVICE_ID_SCHEME in the device id (Peter Wu)

v3: Rebase

Cc: Peter Wu <peter@lekensteyn.nl>
Cc: Rainer Koenig <Rainer.Koenig@ts.fujitsu.com>
Cc: Jan-Marek Glogowski <glogow@fbihome.de>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Cc: Paolo Stivanin <paolostivanin@fastmail.fm>
Tested-by: Rainer Koenig <Rainer.Koenig@ts.fujitsu.com>
Tested-by: Paolo Stivanin <paolostivanin@fastmail.fm>
Tested-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Reviewed-and-tested-by: Peter Wu <peter@lekensteyn.nl>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/9660d29cf310c17bbf4d58c0e09d5b047446e2d5.1479295490.git.jani.nikula@intel.com

drm/i915: fix the dequeue logic for single_port_submission context

For a single_port_submission context, GVT expects that it can only be
submitted to port 0, and there shouldn't be any other context in port 1
at the same time. This is required by GVT-g context to have an opportunity
to save/restore some non-hw context render registers.

This patch is to workaround GVT-g.

v2: optimized code by following Chris's advice, and added more comments to
explain the patch.
v3: followed the coding style.

Signed-off-by: Min He <min.he@intel.com>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1479305104-17049-1-git-send-email-min.he@intel.com

drm/i915/gvt: remove unresolved vfio pin/unpin pages interface dependency

Instead of partially depending on vfio pin/unpin pages interface if
mdev is available, which would result in failure if vfio is not
on. But replace with a wrapper which need to be fixed till mdev
support got fully merged.

Cc: Jike Song <jike.song@intel.com>
Cc: Xiaoguang Chen <xiaoguang.chen@intel.com>
Reviewed-by: Xiaoguang Chen <Xiaoguang.chen@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: drop checks for early Skylake revisions

We no longer cater for pre-production revisions of Skylake.

Fixes: d4362225e8cb ("drm/i915/gvt: update misc ctl regs base on stepping info")
Cc: Ping Gao <ping.a.gao@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: <intel-gfx@lists.freedesktop.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Merge tag 'drm-vc4-next-2016-11-16' of https://github.com/anholt/linux into drm-next

This pull request brings in fragment shader threading and ETC1 support
for vc4.

Merge branch 'drm-tda998x-mali' of git://git.armlinux.org.uk/~rmk/linux-arm into drm-next

Fix conncector registration with tda998x.

* 'drm-tda998x-mali' of git://git.armlinux.org.uk/~rmk/linux-arm:
  drm/i2c: tda998x: mali-dp: hdlcd: refactor connector registration

Merge tag 'drm-misc-next-2016-11-16' of git://anongit.freedesktop.org/git/drm-misc into drm-next

Another pile of misc:
- Explicit fencing for atomic! Big thanks to Gustavo, Sean, Rob 3x, Brian
  and anyone else I've forgotten to make this happen.
- roll out fbdev helper ops to drivers (Stefan Christ)
- last bits of drm_crtc split-up&kerneldoc
- some drm_irq.c crtc functions cleanup
- prepare_fb helper for cma, works correctly with explicit fencing (Marek
  Vasut)
- misc small patches all over

* tag 'drm-misc-next-2016-11-16' of git://anongit.freedesktop.org/git/drm-misc: (51 commits)
  drm/fence: add out-fences support
  drm/fence: add fence timeline to drm_crtc
  drm/fence: add in-fences support
  drm/bridge: analogix_dp: return error if transfer none byte
  drm: drm_irq.h header cleanup
  drm/irq: Unexport drm_vblank_on/off
  drm/irq: Unexport drm_vblank_count
  drm/irq: Make drm_vblank_pre/post_modeset internal
  drm/nouveau: Use drm_crtc_vblank_off/on
  drm/amdgpu: Use drm_crtc_vblank_on/off for dce6
  drm/color: document NULL values and default settings better
  drm: Drop externs from drm_crtc.h
  drm: Move tile group code into drm_connector.c
  drm: Extract drm_mode_config.[hc]
  Revert "drm: Add aspect ratio parsing in DRM layer"
  Revert "drm: Add and handle new aspect ratios in DRM layer"
  drm/print: Move kerneldoc next to definition
  drm: Consolidate dumb buffer docs
  drm: Clean up kerneldoc for struct drm_driver
  drm: Extract drm_drv.h
  ...

drm/vc4: Add fragment shader threading support

FS threading brings performance improvements of 0-20% in glmark2.

The validation code checks for thread switch signals and ensures that
the registers of the other thread are not touched, and that our clamps
are not live across thread switches.  It also checks that the
threading and branching instructions do not interfere.

(Original patch by Jonas, changes by anholt for style cleanup,
removing validation the kernel doesn't need to do, and adding the flag
for userspace).

v2: Minor style fixes from checkpatch.

Signed-off-by: Jonas Pfeil <pfeiljonas@gmx.de>
Signed-off-by: Eric Anholt <eric@anholt.net>

drm/i915/execlists: Use a local lock for dfs_link access

Avoid requiring struct_mutex for exclusive access to the temporary
dfs_link inside the i915_dependency as not all callers may want to touch
struct_mutex. So rather than force them to take a highly contended
lock, introduce a local lock for the execlists schedule operation.

Reported-by: David Weinehall <david.weinehall@linux.intel.com>
Fixes: 9a151987d709 ("drm/i915: Add execution priority boosting for mmioflips")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161116152721.11053-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/fence: add out-fences support

Support DRM out-fences by creating a sync_file with a fence for each CRTC
that sets the OUT_FENCE_PTR property.

We use the out_fence pointer received in the OUT_FENCE_PTR prop to send
the sync_file fd back to userspace.

The sync_file and fd are allocated/created before commit, but the
fd_install operation only happens after we know that commit succeed.

v2: Comment by Rob Clark:
- Squash commit that adds DRM_MODE_ATOMIC_OUT_FENCE flag here.

    Comment by Daniel Vetter:
- Add clean up code for out_fences

v3: Comments by Daniel Vetter:
- create DRM_MODE_ATOMIC_EVENT_MASK
- userspace should fill out_fences_ptr with the crtc_ids for which
it wants fences back.

v4: Create OUT_FENCE_PTR properties and remove old approach.

v5: Comments by Brian Starkey:
- Remove extra fence_get() in atomic_ioctl()
- Check ret before iterating on the crtc_state
- check ret before fd_install
- set fence_state to NULL at the beginning
- check fence_state->out_fence_ptr before put_user()
- change order of fput() and put_unused_fd() on failure

     - Add access_ok() check to the out_fence_ptr received
     - Rebase after fence -> dma_fence rename
     - Store out_fence_ptr in the drm_atomic_state
     - Split crtc_setup_out_fence()
     - return -1 as out_fence with TEST_ONLY flag

v6: Comments by Daniel Vetter
- Add prepare/unprepare_crtc_signaling()
- move struct drm_out_fence_state to drm_atomic.c
- mark get_crtc_fence() as static

    Comments by Brian Starkey
- proper set fence_ptr fence_state array
- isolate fence_idx increment

    - improve error handling

v7: Comments by Daniel Vetter
- remove prefix from internal functions
- make out_fence_ptr an s64 pointer
- degrade DRM_INFO to DRM_DEBUG_ATOMIC when put_user fail
- fix doc issues
- filter out OUT_FENCE_PTR == NULL and do not fail in this case
- add complete_crtc_signalling()
- krealloc fence_state on demand

    Comment by Brian Starkey
- remove unused crtc_state arg from get_out_fence()

v8: Comment by Brian Starkey
- cancel events before check for !fence_state
- convert a few lefovers u64 types for out_fence_ptr
- fix memleak by assign fence_state earlier after realloc
- proper accout num_fences in case of error

v9: Comment by Brian Starkey
- memset last position of fence_state after krealloc
    Comments by Sean Paul
- pass install_fds in complete_crtc_signaling() instead of ret

     - put_user(-1, fence_ptr) when decoding props

v10: Comment by Brian Starkey
- remove unneeded num_fences increment on error path
- kfree fence_state after installing fences fd

v11: rebase against latest drm-misc

v12: rebase again against latest drm-misc

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Brian Starkey <brian.starkey@arm.com> (v10)
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Tested-by: Robert Foss <robert.foss@collabora.com> (v10)
[danvet: Appease checkpatch.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1479301221-13056-1-git-send-email-gustavo@padovan.org

drm/fence: add fence timeline to drm_crtc

Create one timeline context for each CRTC to be able to handle out-fences
and signal them. It adds a few members to struct drm_crtc: fence_context,
where we store the context we get from fence_context_alloc(), the
fence seqno and the fence lock, that we pass in fence_init() to be
used by the fence.

v2: Comment by Daniel Stone:
- add BUG_ON() to fence_to_crtc() macro

v3: Comment by Ville Syrjälä
- Use more meaningful name as crtc timeline name

v4: Comments by Brian Starkey
- Use even more meaninful name for the crtc timeline
- add doc for timeline_name
    Comment by Daniel Vetter
- use in-line style for comments

    - rebase after fence -> dma_fence rename

v5: Comment by Daniel Vetter
- Add doc for drm_crtc_fence_ops

v6: Comment by Chris Wilson
- Move fence_to_crtc to drm_crtc.c
- Move export of drm_crtc_fence_ops to drm_crtc_internal.h

    - rebase against latest drm-misc

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v5)
Reviewed-by: Sean Paul <seanpaul@chromium.org> (v5)
Tested-by: Robert Foss <robert.foss@collabora.com> (v5)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1479220628-10204-1-git-send-email-gustavo@padovan.org

drm/i915/bxt: Broxton decoupled MMIO

Decoupled MMIO is an alternative way to access forcewake domain
registers, which requires less cycles for a single read/write and
avoids frequent software forcewake.
This certainly gives advantage over the forcewake as this new
mechanism “decouples” CPU cycles and allow them to complete even
when GT is in a CPD (frequency change) or C6 state.

This can co-exist with forcewake and we will continue to use forcewake
as appropriate. E.g. 64-bit register writes to avoid writing 2 dwords
separately and land into funny situations.

v2:
- Moved platform check out of the function and got rid of duplicate
 functions to find out decoupled power domain (Chris)
- Added a check for forcewake already held and skipped decoupled
 access (Chris)
- Skipped writing 64 bit registers through decoupled MMIO (Chris)

v3:
- Improved commit message with more info on decoupled mmio (Tvrtko)
- Changed decoupled operation to enum and used u32 instead of
 uint_32 data type for register offset (Tvrtko)
- Moved HAS_DECOUPLED_MMIO to device info (Tvrtko)
- Added lookup table for converting fw_engine to pd_engine (Tvrtko)
- Improved __gen9_decoupled_read and __gen9_decoupled_write
 routines (Tvrtko)

v4:
- Fixed alignment and variable names (Chris)
- Write GEN9_DECOUPLED_REG0_DW1 register in just one go (Zhe Wang)

v5:
- Changed HAS_DECOUPLED_MMIO() argument name to dev_priv (Tvrtko)
- Sanitize info->had_decoupled_mmio at init (Chris)

Signed-off-by: Zhe Wang <zhe1.wang@intel.com>
Signed-off-by: Praveen Paneri <praveen.paneri@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479230360-22395-1-git-send-email-praveen.paneri@intel.com

drm/fence: add in-fences support

There is now a new property called IN_FENCE_FD attached to every plane
state that receives sync_file fds from userspace via the atomic commit
IOCTL.

The fd is then translated to a fence (that may be a fence_array
subclass or just a normal fence) and then used by DRM to fence_wait() for
all fences in the sync_file to signal. So it only commits when all
framebuffers are ready to scanout.

v2: Comments by Daniel Vetter:
- remove set state->fence = NULL in destroy phase
- accept fence -1 as valid and just return 0
- do not call fence_get() - sync_file_fences_get() already calls it
- fence_put() if state->fence is already set, in case userspace
set the property more than once.

v3: WARN_ON if fence is set but state has no FB

v4: Comment from Maarten Lankhorst
- allow set fence with no related fb

v5: rename FENCE_FD to IN_FENCE_FD

v6: Comments by Daniel Vetter:
- rename plane_state->in_fence back to "fence"
- re-introduce WARN_ON if fence set but no fb

     - rebase after fence -> dma_fence rename

v7: Comments by Brian Starkey
- set state->fence to NULL when duplicating the state
- fail if IN_FENCE_FD was already set

v8: rebase against latest drm-misc

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Tested-by: Robert Foss <robert.foss@collabora.com>
[danvet: Rebase onto extracted drm_mode_config.[hc].]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/bridge: analogix_dp: return error if transfer none byte

Reference from drm_dp_aux description (about transfer):
Upon success, the implementation should return the number of payload bytes
that were transferred, or a negative error-code on failure. Helpers
propagate errors from the .transfer() function, with the exception of
the -EBUSY error, which causes a transaction to be retried. On a short,
helpers will return -EPROTO to make it simpler to check for failure.

The analogix_dp_transfer will return num_transferred, but if there is none
byte been transferred, the return value will be 0, which means success, we
should return error-code if transfer none byte.

for (retry = 0; retry < 32; retry++) {
err = aux->transfer(aux, &msg);
if (err < 0) {
if (err == -EBUSY)
continue;

goto unlock;
}
}

Cc: zain wang <wzz@rock-chips.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1479255219-7243-1-git-send-email-jay.xu@rock-chips.com

drm/i915/gvt: check workload empty before real scan

This patch will fix warning log print during command scan caused by
empty workload (ring head equals tail). This patch avoid going into
real scan process if workload is empty. It's guest's responsibility
to make sure if an empty workload is proper to submit to HW.

[v2] modify the patch description. It's a fix, not a w/a.

Signed-off-by: Pei Zhang <pei.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Merge tag 'sunxi-drm-for-4.10' of https://git./linux/kernel/git/mripard/linux into drm-next

sun4i-drm changes for 4.10

Support for the Allwinner A31 SoC display engine using the sun4i-drm
driver.

* tag 'sunxi-drm-for-4.10' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
  drm/sun4i: Add a few formats
  drm/sun4i: Add compatible strings for A31/A31s display pipelines
  drm/sun4i: Add compatible string for A31/A31s TCON (timing controller)
  drm/sun4i: tcon: Move SoC specific quirks to a DT matched data structure
  drm/sun4i: sun6i-drc: Support DRC on A31 and A31s

Merge branch 'drm/next/du' of git://linuxtv.org/pinchartl/media into drm-next

rcar-du -next branch.

* 'drm/next/du' of git://linuxtv.org/pinchartl/media:
  drm: rcar-du: Fix LVDS start sequence on Gen3
  drm: rcar-du: Fix H/V sync signal polarity configuration
  drm: rcar-du: Fix display timing controller parameter
  drm: rcar-du: Fix dot clock routing configuration
  drm: rcar-du: Add R8A7796 support
  drm: rcar-du: Add R8A7792 support
  drm: rcar-du: Simplify and fix probe error handling
  drm: rcar-du: Fix crash in encoder failure error path
  drm: rcar-du: Remove memory allocation error message
  drm: rcar-du: Remove test for impossible error condition
  drm: rcar-du: Bring HDMI encoder comments in line with the driver
  drm: rcar-du: Constify node argument to rcar_du_lvds_connector_init()
  video: of: Constify node argument to display timing functions

drm: drm_irq.h header cleanup

- Drop extern for functions, it's noise.
- Move&consolidate drm.ko internal parts into drm-internal.h.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114090255.31595-6-daniel.vetter@ffwll.ch

drm/irq: Unexport drm_vblank_on/off

Only remaining use was in amdgpu, and trivial to convert over to
drm_crtc_vblank_* variants.

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114090255.31595-5-daniel.vetter@ffwll.ch

drm/irq: Unexport drm_vblank_count

No one outside of drm_irq.c should ever need this. The correct way to
implement get_vblank_count for hw lacking a vblank counter is
drm_vblank_no_hw_counter. Fix this up in mtk, which is the only
offender left over.

Cc: CK Hu <ck.hu@mediatek.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114090255.31595-4-daniel.vetter@ffwll.ch

drm/irq: Make drm_vblank_pre/post_modeset internal

Now that all drivers are switched over to drm_crtc_vblank_on/off we
can relegate pre/post_modeset to the purely drm_irq.c internal role of
supporting old ums userspace.

As usual switch to the drm_legacy_ prefix to make it clear this is
for old drivers only.

v2: Rebase on top of Thierry's s/int crtc/unsigned int pipe/ changes.

Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

drm/nouveau: Use drm_crtc_vblank_off/on

With atomic nv50+ is already converted over to them, but the old
display code is still using it. Found in a 2 year old patch I have
lying around to un-export these old helpers!

v2: Drop the hand-rolled versions from resume/suspend code. Now that
crtc callbacks do this, we don't need a special case for s/r anymore.

v3: Remove unused variables.

v4: Don't remove drm_crtc_vblank_off from suspend paths, non-atomic
nouveau still needs that. But still switch to drm_crtc_vblank_off
since drm_vblank_off will disappear.

Cc: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114114101.21731-1-daniel.vetter@ffwll.ch

drm/amdgpu: Use drm_crtc_vblank_on/off for dce6

This old code pattern was reintroduced in

Author: Ken Wang <Qingqing.Wang@amd.com>
Date:   Tue Jan 19 14:03:24 2016 +0800

    drm/amdgpu: add display controller implementation for si v10

Realign it with later display code. Tsk, tsk for massive copypasting
;-)

Cc: Christian König <christian.koenig@amd.com>
Cc: Ken Wang <Qingqing.Wang@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com> for the whole series.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114090255.31595-1-daniel.vetter@ffwll.ch

drm/color: document NULL values and default settings better

Brought up in a discussion for enabling gamma on fsl-dcu.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Meng Yi <meng.yi@nxp.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160926090437.22676-1-daniel.vetter@ffwll.ch

drm: Drop externs from drm_crtc.h

Just noise.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114115825.22050-11-daniel.vetter@ffwll.ch

drm: Move tile group code into drm_connector.c

And also put the overview section into the KMS Properties part of the
docs, instead of randomly-placed within the helpers - this is part of
the uabi.

With this patch I think drm_crtc.[hc] is cleaned up and entirely
documented.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

drm: Extract drm_mode_config.[hc]

And shuffle the kernel-doc structure a bit since drm_crtc.[hc] now
only contains CRTC-related functions and structures.

v2:
- rebase onto drm-misc
- don't forget to move drm_mode_config_cleanup.
- move 2 internal decls under the right heading (Chris)

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

Revert "drm: Add aspect ratio parsing in DRM layer"

This reverts commit 6dffd431e2296cda08e7e4f0242e02df1d1698cd.

Adding new mode flags willy nilly breaks existing userspace. We need to
coordinate this better, potentially with a new client cap that only
exposes the aspect ratio flags when userspace is prepared for them
(similar to what we do with stereo 3D modes).

This also broke things so that we would always send out VIC==0 in
the AVI infoframe unless the user specified an aspect ratio via
the mode flags. And the automagic RGB full vs. limited range
handling was similartly broken as the user mode would never match
any CEA mode.

Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Lin, Jia <lin.a.jia@intel.com>
Cc: Akashdeep Sharma <akashdeep.sharma@intel.com>
Cc: Jim Bride <jim.bride@linux.intel.com>
Cc: Jose Abreu <Jose.Abreu@synopsys.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1478176304-6743-2-git-send-email-ville.syrjala@linux.intel.com

Revert "drm: Add and handle new aspect ratios in DRM layer"

This reverts commit a68362fe3e84fcbedd49939aa200519aa5410135.

Adding new mode flags willy nilly breaks existing userspace. We need to
coordinate this better, potentially with a new client cap that only
exposes the aspect ratio flags when userspace is prepared for them
(similar to what we do with stereo 3D modes).

Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Lin, Jia <lin.a.jia@intel.com>
Cc: Akashdeep Sharma <akashdeep.sharma@intel.com>
Cc: Jim Bride <jim.bride@linux.intel.com>
Cc: Jose Abreu <Jose.Abreu@synopsys.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1478176304-6743-1-git-send-email-ville.syrjala@linux.intel.com

drm/i915/gen9+: Kill off hw_ddb from intel_crtc.

dev_priv->hw_ddb is only used by skl_update_crtcs, but the ddb
allocation for each pipe is calculated in crtc_state.

We can rid of the global member by looking at crtc_state.
Do this by saving all active old ddb allocations from the old crtc_state
in an array, and then point them to the new allocation every time we update
a crtc.

This will allow us to keep track of the intermediate ddb allocations,
which is what hw_ddb was previously used for. With hw_ddb gone all
SKL-style watermark values are properly maintained only in crtc_state.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478609742-13603-5-git-send-email-maarten.lankhorst@linux.intel.com
[mlankhorst: Reword commit message.]
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>

drm/print: Move kerneldoc next to definition

kerneldoc expects the comment next to definitions, otherwise it can't
pick up exported vs. internal stuff.

This fixes a warning from the doc build done with:

$ make DOCBOOKS="" htmldocs

Fixes: d8187177b0b1 ("drm: add helper for printing to log or seq_file")
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114115825.22050-8-daniel.vetter@ffwll.ch

drm: Consolidate dumb buffer docs

Put the callback docs into struct drm_driver, and the small overview
into a DOC comment.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114115825.22050-7-daniel.vetter@ffwll.ch

drm: Clean up kerneldoc for struct drm_driver

Just cleans up what's there, still plenty missing.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114115825.22050-6-daniel.vetter@ffwll.ch

drm: Extract drm_drv.h

I want to move dumb buffer documentation into the right vfuncs, and
for that I first need to be able to pull that into kerneldoc without
having to clean up all of drmP.h. Also, header-splitting is nice.

While at it shuffle all the function declarations for drm_drv.c into
the right spots, and drop the kerneldoc for drm_minor_acquire/release
since it's only used internally.

v2: Keep all existing copyright notices (Chris).

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

doc/dma-buf: Fix up include directives

Would be great if everony could add

$ make DOCBOOKS="" htmldocs

to their build scripts to catch these. 0day should also report them,
not sure why it failed to spot this.

Fixes: f54d1867005c ("dma-buf: Rename struct fence to dma_fence")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114115825.22050-4-daniel.vetter@ffwll.ch

drm/i915: Fixup kerneldoc includes

Would be great if everony could add

$ make DOCBOOKS="" htmldocs

to their build scripts to catch these. 0day should also report them,
not sure why it failed to spot this.

Fixes: b42fe9ca0a1e ("drm/i915: Split out i915_vma.c")
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114115825.22050-3-daniel.vetter@ffwll.ch

drm: Extract drm_dumb_buffers.c

Just code movement, doc cleanup will follow up later.

v2: Keep all the copyright notices.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114115825.22050-2-daniel.vetter@ffwll.ch

drm/fb_cma_helper: Add missing forward declaration

Add missing forward declaration for struct drm_plane and drm_plane_state,
which causes the following warning in the VC4 driver (can be replicated
by building using bcm2835_defconfig):

In file included from drivers/gpu/drm/vc4/vc4_drv.c:18:0:
include/drm/drm_fb_cma_helper.h:45:13: warning: ‘struct drm_plane_state’ declared inside parameter list will not be visible outside of this definition or declaration
      struct drm_plane_state *state);
             ^~~~~~~~~~~~~~~
include/drm/drm_fb_cma_helper.h:44:34: warning: ‘struct drm_plane’ declared inside parameter list will not be visible outside of this definition or declaration
 int drm_fb_cma_prepare_fb(struct drm_plane *plane,

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161115105529.3227-1-marex@denx.de

drm/i915/gen9+: Preserve old allocation from crtc_state.

This is the last bit required for making nonblocking modesets work
correctly. The state in intel_crtc->hw_ddb is updated in the
nonblocking part of a nonblocking commit.

This means that even attempting a commit before a nonblocking modeset
completes will fail, because intel_crtc->hw_ddb still has stale values.
The stale values are 0 if the crtc is being enabled resulting in a
failure during atomic check, but it may also result in double use of
ddb allocations.

Fix this by explicitly copying the ddb allocation from the old state.
This has to be done explicitly, because a modeset that doesn't change
active pipes, or a modeset converted to a fastset will will clear the
current state.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478609742-13603-4-git-send-email-maarten.lankhorst@linux.intel.com
[mlankhorst: Reword commit message.]
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>

drm/i915/gen9+: Program watermarks as a separate step during evasion, v3.

The watermark updates for SKL style watermarks are no longer done
in the plane callbacks, but are now called in a separate watermark
update function that's called during the same vblank evasion,
before the plane updates.

This also gets rid of the global skl_results, which was required for
keeping track of the current atomic commit.

Changes since v1:
- Move line unwrap to correct patch. (Lyude)
- Make sure we don't regress ILK watermarks. (Matt)
- Rephrase commit message. (Matt)
Changes since v2:
- Fix disable watermark check to use the correct way to determine single
  step watermark support.

Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lyude <cpaul@redhat.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478609742-13603-3-git-send-email-maarten.lankhorst@linux.intel.com
[mlankhorst: Small whitespace fix in skl_initial_wm]

drm/i915: Add an atomic evasion step to watermark programming, v4.

Allow the driver to write watermarks during atomic evasion.
This will make it possible to write the watermarks in a cleaner
way on gen9+.

intel_atomic_state is not used here yet, but will be used when
we program all watermarks as a separate step during evasion.

This also writes linetime all the time, while before it was only
done during plane updates. This looks like this could be a bugfix,
but I'm not sure what it affects.

Changes since v1:
- Add comment about atomic evasion to commit message.
- Unwrap I915_WRITE call. (Lyude)
Changes since v2:
- Rename atomic_evade_watermarks to atomic_update_watermarks. (Ville)
- Add line wraps where appropriate, fix grammar in commit message. (Matt)
Changes since v3:
- Actually fix commit message. (Matt)
- Line wrap calls to watermark update functions. (Matt)

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478609742-13603-2-git-send-email-maarten.lankhorst@linux.intel.com

drm/i915: Add execution priority boosting for mmioflips

Commit 6b5e90f58c56 ("drm/i915/scheduler: Boost priorities for flips")
added priority boosting for the modern atomic pageflips (and modesets),
but we should do the same for existing users of mmioflips (we don't yet
need to consider csflips as they are not used by execlists and so do not
have any support for a scheduler).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20161115092249.18356-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>