flow_offload: support CVLAN match

Plumb it through from the flow_dissector.

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'rhashtable-Fix-sparse-warnings'

Herbert Xu says:

====================
rhashtable: Fix sparse warnings

This patch series fixes all the sparse warnings.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

rhashtable: Fix cmpxchg RCU warnings

As cmpxchg is a non-RCU mechanism it will cause sparse warnings
when we use it for RCU.  This patch adds explicit casts to silence
those warnings.  This should probably be moved to RCU itself in
future.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

rhashtable: Remove RCU marking from rhash_lock_head

The opaque type rhash_lock_head should not be marked with __rcu
because it can never be dereferenced.  We should apply the RCU
marking when we turn it into a pointer which can be dereferenced.

This patch does exactly that.  This fixes a number of sparse
warnings as well as getting rid of some unnecessary RCU checking.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge git://git./pub/scm/linux/kernel/git/bpf/bpf

Daniel Borkmann says:

====================
pull-request: bpf 2019-05-16

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Fix a use after free in __dev_map_entry_free(), from Eric.

2) Several sockmap related bug fixes: a splat in strparser if
   it was never initialized, remove duplicate ingress msg list
   purging which can race, fix msg->sg.size accounting upon
   skb to msg conversion, and last but not least fix a timeout
   bug in tcp_bpf_wait_data(), from John.

3) Fix LRU map to avoid messing with eviction heuristics upon
   syscall lookup, e.g. map walks from user space side will
   then lead to eviction of just recently created entries on
   updates as it would mark all map entries, from Daniel.

4) Don't bail out when libbpf feature probing fails. Also
   various smaller fixes to flow_dissector test, from Stanislav.

5) Fix missing brackets for BTF_INT_OFFSET() in UAPI, from Gary.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

bpf, tcp: correctly handle DONT_WAIT flags and timeo == 0

The tcp_bpf_wait_data() routine needs to check timeo != 0 before
calling sk_wait_event() otherwise we may see unexpected stalls
on receiver.

Arika did all the leg work here I just formatted, posted and ran
a few tests.

Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface")
Reported-by: Arika Chen <eaglesora@gmail.com>
Suggested-by: Arika Chen <eaglesora@gmail.com>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

selftests/bpf: add prog detach to flow_dissector test

In case we are not running in a namespace (which we don't do by default),
let's try to detach the bpf program that we use for eth_get_headlen tests.

Fixes: 0905beec9f52 ("selftests/bpf: run flow dissector tests in skb-less mode")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

selftests/bpf: add missing \n to flow_dissector CHECK errors

Otherwise, in case of an error, everything gets mushed together.

Fixes: a5cb33464e53 ("selftests/bpf: make flow dissector tests more extensible")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

libbpf: don't fail when feature probing fails

Otherwise libbpf is unusable from unprivileged process with
kernel.kernel.unprivileged_bpf_disabled=1.
All I get is EPERM from the probes, even if I just want to
open an ELF object and look at what progs/maps it has.

Instead of dying on probes, let's just pr_debug the error and
try to continue.

Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

tcp: do not recycle cloned skbs

It is illegal to change arbitrary fields in skb_shared_info if the
skb is cloned.

Before calling skb_zcopy_clear() we need to ensure this rule,
therefore we need to move the test from sk_stream_alloc_skb()
to sk_wmem_free_skb()

Fixes: 4f661542a402 ("tcp: fix zerocopy and notsent_lowat issues")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Diagnosed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

enetc: Add missing link state info for ethtool

Just hook get_link to standard ethtool_op_get_link,
nothing special needed at this point.

Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

enetc: Allow to disable Tx SG

The fact that the Tx SG flag is fixed to 'on' is only
an oversight. Non-SG mode is also supported. Fix this
by allowing to turn SG off.

Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

enetc: Fix NULL dma address unmap for Tx BD extensions

For the unlikely case of TxBD extensions (i.e. ptp)
the driver tries to unmap the tx_swbd corresponding
to the extension, which is bogus as it has no buffer
attached.

Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfp: flower: add rcu locks when accessing netdev for tunnels

Add rcu locks when accessing netdev when processing route request
and tunnel keep alive messages received from hardware.

Fixes: 8e6a9046b66a ("nfp: flower vxlan neighbour offload")
Fixes: 856f5b135758 ("nfp: flower vxlan neighbour keep-alive")
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ppp: deflate: Fix possible crash in deflate_init

BUG: unable to handle kernel paging request at ffffffffa018f000
PGD 3270067 P4D 3270067 PUD 3271063 PMD 2307eb067 PTE 0
Oops: 0000 [#1] PREEMPT SMP
CPU: 0 PID: 4138 Comm: modprobe Not tainted 5.1.0-rc7+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014
RIP: 0010:ppp_register_compressor+0x3e/0xd0 [ppp_generic]
Code: 98 4a 3f e2 48 8b 15 c1 67 00 00 41 8b 0c 24 48 81 fa 40 f0 19 a0
75 0e eb 35 48 8b 12 48 81 fa 40 f0 19 a0 74
RSP: 0018:ffffc90000d93c68 EFLAGS: 00010287
RAX: ffffffffa018f000 RBX: ffffffffa01a3000 RCX: 000000000000001a
RDX: ffff888230c750a0 RSI: 0000000000000000 RDI: ffffffffa019f000
RBP: ffffc90000d93c80 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffffffffa0194080
R13: ffff88822ee1a700 R14: 0000000000000000 R15: ffffc90000d93e78
FS:  00007f2339557540(0000) GS:ffff888237a00000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffa018f000 CR3: 000000022bde4000 CR4: 00000000000006f0
Call Trace:
 ? 0xffffffffa01a3000
 deflate_init+0x11/0x1000 [ppp_deflate]
 ? 0xffffffffa01a3000
 do_one_initcall+0x6c/0x3cc
 ? kmem_cache_alloc_trace+0x248/0x3b0
 do_init_module+0x5b/0x1f1
 load_module+0x1db1/0x2690
 ? m_show+0x1d0/0x1d0
 __do_sys_finit_module+0xc5/0xd0
 __x64_sys_finit_module+0x15/0x20
 do_syscall_64+0x6b/0x1d0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

If ppp_deflate fails to register in deflate_init,
module initialization failed out, however
ppp_deflate_draft may has been regiestred and not
unregistered before return.
Then the seconed modprobe will trigger crash like this.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: macb: fix error format in dev_err()

Errors are negative numbers. Using %u shows them as very large positive
numbers such as 4294967277 that don't make sense. Use the %d format
instead, and get a much nicer -19.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Fixes: b48e0bab142f ("net: macb: Migrate to devm clock interface")
Fixes: 93b31f48b3ba ("net/macb: unify clock management")
Fixes: 421d9df0628b ("net/macb: merge at91_ether driver into macb driver")
Fixes: aead88bd0e99 ("net: ethernet: macb: Add support for rx_clk")
Fixes: f5473d1d44e4 ("net: macb: Support clock management for tsu_clk")
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

rtnetlink: always put IFLA_LINK for links with a link-netnsid

Currently, nla_put_iflink() doesn't put the IFLA_LINK attribute when
iflink == ifindex.

In some cases, a device can be created in a different netns with the
same ifindex as its parent. That device will not dump its IFLA_LINK
attribute, which can confuse some userspace software that expects it.
For example, if the last ifindex created in init_net and foo are both
8, these commands will trigger the issue:

    ip link add parent type dummy                   # ifindex 9
    ip link add link parent netns foo type macvlan  # ifindex 9 in ns foo

So, in case a device puts the IFLA_LINK_NETNSID attribute in a dump,
always put the IFLA_LINK attribute as well.

Thanks to Dan Winship for analyzing the original OpenShift bug down to
the missing netlink attribute.

v2: change Fixes tag, it's been here forever, as Nicolas Dichtel said
    add Nicolas' ack
v3: change Fixes tag
    fix subject typo, spotted by Edward Cree

Analyzed-by: Dan Winship <danw@redhat.com>
Fixes: d8a5ec672768 ("[NET]: netlink support for moving devices between network namespaces.")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/mlx4_core: Change the error print to info print

The error print within mlx4_flow_steer_promisc_add() should
be a info print.

Fixes: 592e49dda812 ('net/mlx4: Implement promiscuous mode with device managed flow-steering')
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

NFC: Orphan the subsystem

Samuel clearly hasn't been working on this in many years and
patches getting to the wireless list are just being ignored
entirely now. Mark the subsystem as orphan to reflect the
current state and revert back to the netdev list so at least
some fixes can be picked up by Dave.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: Always descend into dsa/

Jiri reported that with a kernel built with CONFIG_FIXED_PHY=y,
CONFIG_NET_DSA=m and CONFIG_NET_DSA_LOOP=m, we would not get to a
functional state where the mock-up driver is registered. Turns out that
we are not descending into drivers/net/dsa/ unconditionally, and we
won't be able to link-in dsa_loop_bdinfo.o which does the actual mock-up
mdio device registration.

Reported-by: Jiri Pirko <jiri@resnulli.us>
Fixes: 40013ff20b1b ("net: dsa: Fix functional dsa-loop dependency on FIXED_PHY")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Tested-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: fix retrans timestamp on passive Fast Open

Commit c7d13c8faa74 ("tcp: properly track retry time on
passive Fast Open") sets the start of SYNACK retransmission
time on passive Fast Open in "retrans_stamp". However the
timestamp is not reset upon the handshake has completed. As a
result, future data packet retransmission may not update it in
tcp_retransmit_skb(). This may lead to socket aborting earlier
unexpectedly by retransmits_timed_out() since retrans_stamp remains
the SYNACK rtx time.

This bug only manifests on passive TFO sender that a) suffered
SYNACK timeout and then b) stalls on very first loss recovery. Any
successful loss recovery would reset the timestamp to avoid this
issue.

Fixes: c7d13c8faa74 ("tcp: properly track retry time on passive Fast Open")
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost

Pull virtio updates from Michael Tsirkin:

 - enable packed ring support for s390

 - several fixes

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  virtio/s390: enable packed ring
  virtio/s390: DMA support for virtio-ccw
  virtio/s390: use vring_create_virtqueue
  virtio/virtio_ring: do some comment fixes
  vhost-scsi: remove incorrect memory barrier
  tools/virtio/ringtest: Remove bogus definition of BUG_ON()
  virtio_ring: Fix potential mem leak in virtqueue_add_indirect_packed

Add gitignore file for samples/vfs/ generated files

Commit f1b5618e013a ("vfs: Add a sample program for the new mount API")
added sample programs that get built during the kernel build, but then
cause 'git status' to worry about whether the resulting binaries should
be managed by git.

Tell git not to worry, and to ignore the sample binaries.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'parisc-5.2-2' of git://git./linux/kernel/git/deller/parisc-linux

Pull more parisc updates from Helge Deller:
 "Two small enhancements, which I didn't included in the last pull
  request because I wanted to keep them a few more days in for-next
  before sending upstream:

   - Replace the ldcw barrier instruction by a nop instruction in the
     CAS code on uniprocessor machines.

   - Map variables read-only after init (enable ro_after_init feature)"

* 'parisc-5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Use __ro_after_init in init.c
  parisc: Use __ro_after_init in unwind.c
  parisc: Use __ro_after_init in time.c
  parisc: Use __ro_after_init in processor.c
  parisc: Use __ro_after_init in process.c
  parisc: Use __ro_after_init in perf_images.h
  parisc: Use __ro_after_init in pci.c
  parisc: Use __ro_after_init in inventory.c
  parisc: Use __ro_after_init in head.S
  parisc: Use __ro_after_init in firmware.c
  parisc: Use __ro_after_init in drivers.c
  parisc: Use __ro_after_init in cache.c
  parisc: Enable the ro_after_init feature
  parisc: Drop LDCW barrier in CAS code when running UP

Merge tag 'kgdb-5.2-rc1' of git://git./linux/kernel/git/danielt/linux

Pull kgdb updates from Daniel Thompson:
 "Mostly cleanups but there are also a couple of fixes for out-of-bounds
  accesses (including a potential write to the byte before a static
  buffer).

  The main changes are:

   - Fixes to those out-of-bounds access (empty string to configure test
     module could write the byte before a buffer, high cpu counts could
     read outside of per-cpu structures).

   - Improvements to string handling problems picked up by new compiler
     warnings and other static checks. Most are fixing benign issues
     that can't be tickled without code changes but still reduce the wtf
     factor a little.

   - Tidy up the terminal output"

* tag 'kgdb-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
  kdb: Fix bound check compiler warning
  kdb: do a sanity check on the cpu in kdb_per_cpu()
  kdb: Get rid of broken attempt to print CCVERSION in kdb summary
  misc: kgdbts: fix out-of-bounds access in function param_set_kgdbts_var
  kdb: kdb_support: replace strcpy() by strscpy()
  gdbstub: Replace strcpy() by strscpy()
  gdbstub: mark expected switch fall-throughs

Merge tag 'modules-for-v5.2' of git://git./linux/kernel/git/jeyu/linux

Pull modules updates from Jessica Yu:

 - Use a separate table to store symbol types instead of hijacking
   fields in struct Elf_Sym

 - Trivial code cleanups

* tag 'modules-for-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
  module: add stubs for within_module functions
  kallsyms: store type information in its own array
  vmlinux.lds.h: drop unused __vermagic

Merge branch 'lru-map-fix'

Daniel Borkmann says:

====================
This set fixes LRU map eviction in combination with map lookups out
of system call side from user space. Main patch is the second one and
test cases are adapted and added in the last one. Thanks!
====================

Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

bpf: test ref bit from data path and add new tests for syscall path

The test_lru_map is relying on marking the LRU map entry via regular
BPF map lookup from system call side. This is basically for simplicity
reasons. Given we fixed marking entries in that case, the test needs
to be fixed as well. Here we add a small drop-in replacement to retain
existing behavior for the tests by marking out of the BPF program and
transferring the retrieved value out via temporary map. This also adds
new test cases to track the new behavior where two elements are marked,
one via system call side and one via program side, where the next update
then evicts the key looked up only from system call side.

  # ./test_lru_map
  nr_cpus:8

  test_lru_sanity0 (map_type:9 map_flags:0x0): Pass
  test_lru_sanity1 (map_type:9 map_flags:0x0): Pass
  test_lru_sanity2 (map_type:9 map_flags:0x0): Pass
  test_lru_sanity3 (map_type:9 map_flags:0x0): Pass
  test_lru_sanity4 (map_type:9 map_flags:0x0): Pass
  test_lru_sanity5 (map_type:9 map_flags:0x0): Pass
  test_lru_sanity7 (map_type:9 map_flags:0x0): Pass
  test_lru_sanity8 (map_type:9 map_flags:0x0): Pass

  test_lru_sanity0 (map_type:10 map_flags:0x0): Pass
  test_lru_sanity1 (map_type:10 map_flags:0x0): Pass
  test_lru_sanity2 (map_type:10 map_flags:0x0): Pass
  test_lru_sanity3 (map_type:10 map_flags:0x0): Pass
  test_lru_sanity4 (map_type:10 map_flags:0x0): Pass
  test_lru_sanity5 (map_type:10 map_flags:0x0): Pass
  test_lru_sanity7 (map_type:10 map_flags:0x0): Pass
  test_lru_sanity8 (map_type:10 map_flags:0x0): Pass

  test_lru_sanity0 (map_type:9 map_flags:0x2): Pass
  test_lru_sanity4 (map_type:9 map_flags:0x2): Pass
  test_lru_sanity6 (map_type:9 map_flags:0x2): Pass
  test_lru_sanity7 (map_type:9 map_flags:0x2): Pass
  test_lru_sanity8 (map_type:9 map_flags:0x2): Pass

  test_lru_sanity0 (map_type:10 map_flags:0x2): Pass
  test_lru_sanity4 (map_type:10 map_flags:0x2): Pass
  test_lru_sanity6 (map_type:10 map_flags:0x2): Pass
  test_lru_sanity7 (map_type:10 map_flags:0x2): Pass
  test_lru_sanity8 (map_type:10 map_flags:0x2): Pass

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

bpf, lru: avoid messing with eviction heuristics upon syscall lookup

One of the biggest issues we face right now with picking LRU map over
regular hash table is that a map walk out of user space, for example,
to just dump the existing entries or to remove certain ones, will
completely mess up LRU eviction heuristics and wrong entries such
as just created ones will get evicted instead. The reason for this
is that we mark an entry as "in use" via bpf_lru_node_set_ref() from
system call lookup side as well. Thus upon walk, all entries are
being marked, so information of actual least recently used ones
are "lost".

In case of Cilium where it can be used (besides others) as a BPF
based connection tracker, this current behavior causes disruption
upon control plane changes that need to walk the map from user space
to evict certain entries. Discussion result from bpfconf [0] was that
we should simply just remove marking from system call side as no
good use case could be found where it's actually needed there.
Therefore this patch removes marking for regular LRU and per-CPU
flavor. If there ever should be a need in future, the behavior could
be selected via map creation flag, but due to mentioned reason we
avoid this here.

  [0] http://vger.kernel.org/bpfconf.html

Fixes: 29ba732acbee ("bpf: Add BPF_MAP_TYPE_LRU_HASH")
Fixes: 8f8449384ec3 ("bpf: Add BPF_MAP_TYPE_LRU_PERCPU_HASH")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

bpf: add map_lookup_elem_sys_only for lookups from syscall side

Add a callback map_lookup_elem_sys_only() that map implementations
could use over map_lookup_elem() from system call side in case the
map implementation needs to handle the latter differently than from
the BPF data path. If map_lookup_elem_sys_only() is set, this will
be preferred pick for map lookups out of user space. This hook is
used in a follow-up fix for LRU map, but once development window
opens, we can convert other map types from map_lookup_elem() (here,
the one called upon BPF_MAP_LOOKUP_ELEM cmd is meant) over to use
the callback to simplify and clean up the latter.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Merge tag 'backlight-next-5.2' of git://git./linux/kernel/git/lee/backlight

Pull backlight updates from Lee Jones:
 "Fix-ups:
   - Remove unused BACKLIGHT_LCD_SUPPORT symbol
   - Remove unused BACKLIGHT_CLASS_DEVICE dependencies
   - Add DT support to lm3630a_bl

  Bug Fixes:
   - Fix error path issues in lm3630a_bl"

* tag 'backlight-next-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight: lm3630a: Add firmware node support
  dt-bindings: backlight: Add lm3630a bindings
  backlight: lm3630a: Return 0 on success in update_status functions
  video: lcd: Remove useless BACKLIGHT_CLASS_DEVICE dependencies
  video: backlight: Remove useless BACKLIGHT_LCD_SUPPORT kernel symbol

Merge tag 'mfd-next-5.2' of git://git./linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "Core Framework:
   - Document (kerneldoc) core mfd_add_devices() API

  New Drivers:
   - Altera SOCFPGA System Manager
   - Maxim MAX77650/77651 PMIC
   - Maxim MAX77663 PMIC
   - ST Multi-Function eXpander (STMFX)

  New Device Support:
   - LEDs support in Intel Cherry Trail Whiskey Cove PMIC
   - RTC support in SAMSUNG Electronics S2MPA01 PMIC
   - SAM9X60 support in Atmel HLCDC (High-end LCD Controller)
   - USB X-Powers AXP 8xx PMICs
   - Integrated Sensor Hub (ISH) in ChromeOS EC
   - USB PD Logger in ChromeOS EC
   - AXP223 in X-Powers AXP series PMICs
   - Power Supply in X-Powers AXP 803 PMICs
   - Comet Lake in Intel Low Power Subsystem
   - Fingerprint MCU in ChromeOS EC
   - Touchpad MCU in ChromeOS EC
   - Move TI LM3532 support to LED

  New Functionality:
   - max77650, max77620: Add/extend DT support
   - max77620 power-off
   - syscon clocking
   - croc_ec host sleep event

  Fix-ups:
   - Trivial; Formatting, spelling, etc; Kconfig, sec-core, ab8500-debugfs
   - Remove unused functionality; rk808, da9063-*
   - SPDX conversion; da9063-*, atmel-*,
   - Adapt/add new register definitions; cs47l35-tables, cs47l90-tables, imx6q-iomuxc-gpr
   - Fix-up DT bindings; ti-lmu, cirrus,lochnagar
   - Simply obtaining driver data; ssbi, t7l66xb, tc6387xb, tc6393xb

  Bug Fixes:
   - Fix incorrect defined values; max77620, da9063
   - Fix device initialisation; twl6040
   - Reset device on init; intel-lpss
   - Fix build warnings when !OF; sun6i-prcm
   - Register OF match tables; tps65912-spi
   - Fix DMI matching; intel_quark_i2c_gpio"

* tag 'mfd-next-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (65 commits)
  mfd: Use dev_get_drvdata() directly
  mfd: cros_ec: Instantiate properly CrOS Touchpad MCU device
  mfd: cros_ec: Instantiate properly CrOS FP MCU device
  mfd: cros_ec: Update the EC feature codes
  mfd: intel-lpss: Add Intel Comet Lake PCI IDs
  mfd: lochnagar: Add links to binding docs for sound and hwmon
  mfd: ab8500-debugfs: Fix a typo ("deubgfs")
  mfd: imx6sx: Add MQS register definition for iomuxc gpr
  dt-bindings: mfd: LMU: Fix lm3632 dt binding example
  mfd: intel_quark_i2c_gpio: Adjust IOT2000 matching
  mfd: da9063: Fix OTP control register names to match datasheets for DA9063/63L
  mfd: tps65912-spi: Add missing of table registration
  mfd: axp20x: Add USB power supply mfd cell to AXP803
  mfd: sun6i-prcm: Fix build warning for non-OF configurations
  mfd: intel-lpss: Set the device in reset state when init
  platform/chrome: Add support for v1 of host sleep event
  mfd: cros_ec: Add host_sleep_event_v1 command
  mfd: cros_ec: Instantiate the CrOS USB PD logger driver
  mfd: cs47l90: Make DAC_AEC_CONTROL_2 readable
  mfd: cs47l35: Make DAC_AEC_CONTROL_2 readable
  ...

Merge tag 'pci-v5.2-changes' of git://git./linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "Enumeration changes:

   - Add _HPX Type 3 settings support, which gives firmware more
     influence over device configuration (Alexandru Gagniuc)

   - Support fixed bus numbers from bridge Enhanced Allocation
     capabilities (Subbaraya Sundeep)

   - Add "external-facing" DT property to identify cases where we
     require IOMMU protection against untrusted devices (Jean-Philippe
     Brucker)

   - Enable PCIe services for host controller drivers that use managed
     host bridge alloc (Jean-Philippe Brucker)

   - Log PCIe port service messages with pci_dev, not the pcie_device
     (Frederick Lawler)

   - Convert pciehp from pciehp_debug module parameter to generic
     dynamic debug (Frederick Lawler)

  Peer-to-peer DMA:

   - Add whitelist of Root Complexes that support peer-to-peer DMA
     between Root Ports (Christian König)

  Native controller drivers:

   - Add PCI host bridge DMA ranges for bridges that can't DMA
     everywhere, e.g., iProc (Srinath Mannam)

   - Add Amazon Annapurna Labs PCIe host controller driver (Jonathan
     Chocron)

   - Fix Tegra MSI target allocation so DMA doesn't generate unwanted
     MSIs (Vidya Sagar)

   - Fix of_node reference leaks (Wen Yang)

   - Fix Hyper-V module unload & device removal issues (Dexuan Cui)

   - Cleanup R-Car driver (Marek Vasut)

   - Cleanup Keystone driver (Kishon Vijay Abraham I)

   - Cleanup i.MX6 driver (Andrey Smirnov)

  Significant bug fixes:

   - Reset Lenovo ThinkPad P50 GPU so nouveau works after reboot (Lyude
     Paul)

   - Fix Switchtec firmware update performance issue (Wesley Sheng)

   - Work around Pericom switch link retraining erratum (Stefan Mätje)"

* tag 'pci-v5.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (141 commits)
  MAINTAINERS: Add Karthikeyan Mitran and Hou Zhiqiang for Mobiveil PCI
  PCI: pciehp: Remove pointless MY_NAME definition
  PCI: pciehp: Remove pointless PCIE_MODULE_NAME definition
  PCI: pciehp: Remove unused dbg/err/info/warn() wrappers
  PCI: pciehp: Log messages with pci_dev, not pcie_device
  PCI: pciehp: Replace pciehp_debug module param with dyndbg
  PCI: pciehp: Remove pciehp_debug uses
  PCI/AER: Log messages with pci_dev, not pcie_device
  PCI/DPC: Log messages with pci_dev, not pcie_device
  PCI/PME: Replace dev_printk(KERN_DEBUG) with dev_info()
  PCI/AER: Replace dev_printk(KERN_DEBUG) with dev_info()
  PCI: Replace dev_printk(KERN_DEBUG) with dev_info(), etc
  PCI: Replace printk(KERN_INFO) with pr_info(), etc
  PCI: Use dev_printk() when possible
  PCI: Cleanup setup-bus.c comments and whitespace
  PCI: imx6: Allow asynchronous probing
  PCI: dwc: Save root bus for driver remove hooks
  PCI: dwc: Use devm_pci_alloc_host_bridge() to simplify code
  PCI: dwc: Free MSI in dw_pcie_host_init() error path
  PCI: dwc: Free MSI IRQ page in dw_pcie_free_msi()
  ...

Merge branch 'akpm' (patches from Andrew)

Merge misc updates from Andrew Morton:

 - a few misc things and hotfixes

 - ocfs2

 - almost all of MM

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (139 commits)
  kernel/memremap.c: remove the unused device_private_entry_fault() export
  mm: delete find_get_entries_tag
  mm/huge_memory.c: make __thp_get_unmapped_area static
  mm/mprotect.c: fix compilation warning because of unused 'mm' variable
  mm/page-writeback: introduce tracepoint for wait_on_page_writeback()
  mm/vmscan: simplify trace_reclaim_flags and trace_shrink_flags
  mm/Kconfig: update "Memory Model" help text
  mm/vmscan.c: don't disable irq again when count pgrefill for memcg
  mm: memblock: make keeping memblock memory opt-in rather than opt-out
  hugetlbfs: always use address space in inode for resv_map pointer
  mm/z3fold.c: support page migration
  mm/z3fold.c: add structure for buddy handles
  mm/z3fold.c: improve compression by extending search
  mm/z3fold.c: introduce helper functions
  mm/page_alloc.c: remove unnecessary parameter in rmqueue_pcplist
  mm/hmm: add ARCH_HAS_HMM_MIRROR ARCH_HAS_HMM_DEVICE Kconfig
  mm/vmscan.c: simplify shrink_inactive_list()
  fs/sync.c: sync_file_range(2) may use WB_SYNC_ALL writeback
  xen/privcmd-buf.c: convert to use vm_map_pages_zero()
  xen/gntdev.c: convert to use vm_map_pages()
  ...

kernel/memremap.c: remove the unused device_private_entry_fault() export

This export has been entirely unused since it was added more than 1 1/2
years ago.

Link: http://lkml.kernel.org/r/20190429115535.12793-1-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: delete find_get_entries_tag

I removed the only user of this and hadn't noticed it was now unused.

Link: http://lkml.kernel.org/r/20190430152929.21813-1-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Ross Zwisler <zwisler@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/huge_memory.c: make __thp_get_unmapped_area static

__thp_get_unmapped_area is only used in mm/huge_memory.c.  Make it static.
Tested by building and booting the kernel.

Link: http://lkml.kernel.org/r/20190504102353.GA22525@bharath12345-Inspiron-5559
Signed-off-by: Bharath Vedartham <linux.bhar@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/mprotect.c: fix compilation warning because of unused 'mm' variable

Since 0cbe3e26abe0 ("mm: update ptep_modify_prot_start/commit to take
vm_area_struct as arg") the only place that uses the local 'mm' variable
in change_pte_range() is the call to set_pte_at().

Many architectures define set_pte_at() as macro that does not use the 'mm'
parameter, which generates the following compilation warning:

 CC      mm/mprotect.o
mm/mprotect.c: In function 'change_pte_range':
mm/mprotect.c:42:20: warning: unused variable 'mm' [-Wunused-variable]
  struct mm_struct *mm = vma->vm_mm;
                    ^~

Fix it by passing vma->mm to set_pte_at() and dropping the local 'mm'
variable in change_pte_range().

[liu.song.a23@gmail.com: fix missed conversions]
Link: http://lkml.kernel.org/r/CAPhsuW6wcQgYLHNdBdw6m0YiR4RWsS4XzfpSKU7wBLLeOCTbpw@mail.gmail.comLink:
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Song Liu <liu.song.a23@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/page-writeback: introduce tracepoint for wait_on_page_writeback()

Recently there have been some hung tasks on our server due to
wait_on_page_writeback(), and we want to know the details of this
PG_writeback, i.e.  this page is writing back to which device.  But it is
not so convenient to get the details.

I think it would be better to introduce a tracepoint for diagnosing the
writeback details.

Link: http://lkml.kernel.org/r/1556274402-19018-1-git-send-email-laoar.shao@gmail.com
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/vmscan: simplify trace_reclaim_flags and trace_shrink_flags

trace_reclaim_flags and trace_shrink_flags are almost the same.
We can simplify them to avoid redundant code.

Link: http://lkml.kernel.org/r/1556169203-5858-1-git-send-email-laoar.shao@gmail.com
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/Kconfig: update "Memory Model" help text

The help describing the memory model selection is outdated.  It still says
that SPARSEMEM is experimental and DISCONTIGMEM is a preferred over
SPARSEMEM.

Update the help text for the relevant options:
* add a generic help for the "Memory Model" prompt
* add description for FLATMEM
* reduce the description of DISCONTIGMEM and add a deprecation note
* prefer SPARSEMEM over DISCONTIGMEM

Link: http://lkml.kernel.org/r/1556188531-20728-1-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/vmscan.c: don't disable irq again when count pgrefill for memcg

We can use __count_memcg_events() directly because this callsite is alreay
protected by spin_lock_irq().

Link: http://lkml.kernel.org/r/1556093494-30798-1-git-send-email-laoar.shao@gmail.com
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: memblock: make keeping memblock memory opt-in rather than opt-out

Most architectures do not need the memblock memory after the page
allocator is initialized, but only few enable ARCH_DISCARD_MEMBLOCK in the
arch Kconfig.

Replacing ARCH_DISCARD_MEMBLOCK with ARCH_KEEP_MEMBLOCK and inverting the
logic makes it clear which architectures actually use memblock after
system initialization and skips the necessity to add ARCH_DISCARD_MEMBLOCK
to the architectures that are still missing that option.

Link: http://lkml.kernel.org/r/1556102150-32517-1-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hugetlbfs: always use address space in inode for resv_map pointer

Continuing discussion about 58b6e5e8f1ad ("hugetlbfs: fix memory leak for
resv_map") brought up the issue that inode->i_mapping may not point to the
address space embedded within the inode at inode eviction time.  The
hugetlbfs truncate routine handles this by explicitly using inode->i_data.
However, code cleaning up the resv_map will still use the address space
pointed to by inode->i_mapping.  Luckily, private_data is NULL for address
spaces in all such cases today but, there is no guarantee this will
continue.

Change all hugetlbfs code getting a resv_map pointer to explicitly get it
from the address space embedded within the inode.  In addition, add more
comments in the code to indicate why this is being done.

Link: http://lkml.kernel.org/r/20190419204435.16984-1-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Yufen Yu <yuyufen@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/z3fold.c: support page migration

Now that we are not using page address in handles directly, we can make
z3fold pages movable to decrease the memory fragmentation z3fold may
create over time.

This patch starts advertising non-headless z3fold pages as movable and
uses the existing kernel infrastructure to implement moving of such pages
per memory management subsystem's request.  It thus implements 3 required
callbacks for page migration:

* isolation callback: z3fold_page_isolate(): try to isolate the page by
  removing it from all lists.  Pages scheduled for some activity and
  mapped pages will not be isolated.  Return true if isolation was
  successful or false otherwise

* migration callback: z3fold_page_migrate(): re-check critical
  conditions and migrate page contents to the new page provided by the
  memory subsystem.  Returns 0 on success or negative error code otherwise

* putback callback: z3fold_page_putback(): put back the page if
  z3fold_page_migrate() for it failed permanently (i.  e.  not with
  -EAGAIN code).

[lkp@intel.com: z3fold_page_isolate() can be static]
Link: http://lkml.kernel.org/r/20190419130924.GA161478@ivb42
Link: http://lkml.kernel.org/r/20190417103922.31253da5c366c4ebe0419cfc@gmail.com
Signed-off-by: Vitaly Wool <vitaly.vul@sony.com>
Signed-off-by: kbuild test robot <lkp@intel.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sonymobile.com>
Cc: Uladzislau Rezki <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/z3fold.c: add structure for buddy handles

For z3fold to be able to move its pages per request of the memory
subsystem, it should not use direct object addresses in handles.  Instead,
it will create abstract handles (3 per page) which will contain pointers
to z3fold objects.  Thus, it will be possible to change these pointers
when z3fold page is moved.

Link: http://lkml.kernel.org/r/20190417103826.484eaf18c1294d682769880f@gmail.com
Signed-off-by: Vitaly Wool <vitaly.vul@sony.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sonymobile.com>
Cc: Uladzislau Rezki <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/z3fold.c: improve compression by extending search

The current z3fold implementation only searches this CPU's page lists for
a fitting page to put a new object into.  This patch adds quick search for
very well fitting pages (i.  e.  those having exactly the required number
of free space) on other CPUs too, before allocating a new page for that
object.

Link: http://lkml.kernel.org/r/20190417103733.72ae81abe1552397c95a008e@gmail.com
Signed-off-by: Vitaly Wool <vitaly.vul@sony.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sonymobile.com>
Cc: Uladzislau Rezki <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/z3fold.c: introduce helper functions

Patch series "z3fold: support page migration", v2.

This patchset implements page migration support and slightly better buddy
search.  To implement page migration support, z3fold has to move away from
the current scheme of handle encoding.  i.  e.  stop encoding page address
in handles.  Instead, a small per-page structure is created which will
contain actual addresses for z3fold objects, while pointers to fields of
that structure will be used as handles.

Thus, it will be possible to change the underlying addresses to reflect
page migration.

To support migration itself, 3 callbacks will be implemented:

1: isolation callback: z3fold_page_isolate(): try to isolate the page
   by removing it from all lists.  Pages scheduled for some activity and
   mapped pages will not be isolated.  Return true if isolation was
   successful or false otherwise

2: migration callback: z3fold_page_migrate(): re-check critical
   conditions and migrate page contents to the new page provided by the
   system.  Returns 0 on success or negative error code otherwise

3: putback callback: z3fold_page_putback(): put back the page if
   z3fold_page_migrate() for it failed permanently (i.  e.  not with
   -EAGAIN code).

To make sure an isolated page doesn't get freed, its kref is incremented
in z3fold_page_isolate() and decremented during post-migration compaction,
if migration was successful, or by z3fold_page_putback() in the other
case.

Since the new handle encoding scheme implies slight memory consumption
increase, better buddy search (which decreases memory consumption) is
included in this patchset.

This patch (of 4):

Introduce a separate helper function for object allocation, as well as 2
smaller helpers to add a buddy to the list and to get a pointer to the
pool from the z3fold header.  No functional changes here.

Link: http://lkml.kernel.org/r/20190417103633.a4bb770b5bf0fb7e43ce1666@gmail.com
Signed-off-by: Vitaly Wool <vitaly.vul@sony.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sonymobile.com>
Cc: Uladzislau Rezki <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/page_alloc.c: remove unnecessary parameter in rmqueue_pcplist

Because rmqueue_pcplist() is only called when order is 0, we don't need to
use order as a parameter.

Link: http://lkml.kernel.org/r/1555591709-11744-1-git-send-email-laoar.shao@gmail.com
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Pankaj Gupta <pagupta@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/hmm: add ARCH_HAS_HMM_MIRROR ARCH_HAS_HMM_DEVICE Kconfig

Add 2 new Kconfig variables that are not used by anyone.  I check that
various make ARCH=somearch allmodconfig do work and do not complain.  This
new Kconfig needs to be added first so that device drivers that depend on
HMM can be updated.

Once drivers are updated then I can update the HMM Kconfig to depend on
this new Kconfig in a followup patch.

This is about solving Kconfig for HMM given that device driver are
going through their own tree we want to avoid changing them from the mm
tree.  So plan is:

1 - Kernel release N add the new Kconfig to mm/Kconfig (this patch)
2 - Kernel release N+1 update driver to depend on new Kconfig ie
    stop using ARCH_HASH_HMM and start using ARCH_HAS_HMM_MIRROR
    and ARCH_HAS_HMM_DEVICE (one or the other or both depending
    on the driver)
3 - Kernel release N+2 remove ARCH_HASH_HMM and do final Kconfig
    update in mm/Kconfig

Link: http://lkml.kernel.org/r/20190417211141.17580-1-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/vmscan.c: simplify shrink_inactive_list()

This merges together duplicated patterns of code.  Also, replace
count_memcg_events() with its irq-careless namesake, because they are
already called in interrupts disabled context.

Link: http://lkml.kernel.org/r/2ece1df4-2989-bc9b-6172-61e9fdde5bfd@virtuozzo.com
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/sync.c: sync_file_range(2) may use WB_SYNC_ALL writeback

23d0127096cb ("fs/sync.c: make sync_file_range(2) use WB_SYNC_NONE
writeback") claims that sync_file_range(2) syscall was "created for
userspace to be able to issue background writeout and so waiting for
in-flight IO is undesirable there" and changes the writeback (back) to
WB_SYNC_NONE.

This claim is only partially true.  It is true for users that use the flag
SYNC_FILE_RANGE_WRITE by itself, as does PostgreSQL, the user that was the
reason for changing to WB_SYNC_NONE writeback.

However, that claim is not true for users that use that flag combination
SYNC_FILE_RANGE_{WAIT_BEFORE|WRITE|_WAIT_AFTER}.  Those users explicitly
requested to wait for in-flight IO as well as to writeback of dirty pages.

Re-brand that flag combination as SYNC_FILE_RANGE_WRITE_AND_WAIT and use
WB_SYNC_ALL writeback to perform the full range sync request.

Link: http://lkml.kernel.org/r/20190409114922.30095-1-amir73il@gmail.com
Link: http://lkml.kernel.org/r/20190419072938.31320-1-amir73il@gmail.com
Fixes: 23d0127096cb ("fs/sync.c: make sync_file_range(2) use WB_SYNC_NONE")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Jan Kara <jack@suse.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

xen/privcmd-buf.c: convert to use vm_map_pages_zero()

Convert to use vm_map_pages_zero() to map range of kernel memory to user
vma.

This driver has ignored vm_pgoff.  We could later "fix" these drivers to
behave according to the normal vm_pgoff offsetting simply by removing the
_zero suffix on the function name and if that causes regressions, it gives
us an easy way to revert.

Link: http://lkml.kernel.org/r/acf678e81d554d01a9b590716ac0ccbdcdf71c25.1552921225.git.jrdr.linux@gmail.com
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Cc: Pawel Osciak <pawel@osciak.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

xen/gntdev.c: convert to use vm_map_pages()

Convert to use vm_map_pages() to map range of kernel memory to user vma.

map->count is passed to vm_map_pages() and internal API verify map->count
against count ( count = vma_pages(vma)) for page array boundary overrun
condition.

Link: http://lkml.kernel.org/r/88e56e82d2db98705c2d842e9c9806c00b366d67.1552921225.git.jrdr.linux@gmail.com
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Cc: Pawel Osciak <pawel@osciak.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

videobuf2/videobuf2-dma-sg.c: convert to use vm_map_pages()

Convert to use vm_map_pages() to map range of kernel memory to user vma.

vm_pgoff is treated in V4L2 API as a 'cookie' to select a buffer, not as a
in-buffer offset by design and it always want to mmap a whole buffer from
its beginning.

Link: http://lkml.kernel.org/r/a953fe6b3056de1cc6eab654effdd4a22f125375.1552921225.git.jrdr.linux@gmail.com
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Cc: Pawel Osciak <pawel@osciak.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

iommu/dma-iommu.c: convert to use vm_map_pages()

Convert to use vm_map_pages() to map range of kernel memory to user vma.

Link: http://lkml.kernel.org/r/80c3d220fc6ada73a88ce43ca049afb55a889258.1552921225.git.jrdr.linux@gmail.com
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Cc: Pawel Osciak <pawel@osciak.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drm/xen/xen_drm_front_gem.c: convert to use vm_map_pages()

Convert to use vm_map_pages() to map range of kernel memory to user vma.

Link: http://lkml.kernel.org/r/ff8e10ba778d79419c66ee8215bccf01560540fd.1552921225.git.jrdr.linux@gmail.com
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Pawel Osciak <pawel@osciak.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drm/rockchip/rockchip_drm_gem.c: convert to use vm_map_pages()

Convert to use vm_map_pages() to map range of kernel memory to user vma.

Tested on Rockchip hardware and display is working, including talking to
Lima via prime.

Link: http://lkml.kernel.org/r/7ba359eb1aceac388d05983c1f29b915bdf291f9.1552921225.git.jrdr.linux@gmail.com
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Cc: Pawel Osciak <pawel@osciak.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/firewire/core-iso.c: convert to use vm_map_pages_zero()

Convert to use vm_map_pages_zero() to map range of kernel memory to user
vma.

This driver has ignored vm_pgoff and mapped the entire pages.  We could
later "fix" these drivers to behave according to the normal vm_pgoff
offsetting simply by removing the _zero suffix on the function name and if
that causes regressions, it gives us an easy way to revert.

Link: http://lkml.kernel.org/r/88645f5ea8202784a8baaf389e592aeb8c505e8e.1552921225.git.jrdr.linux@gmail.com
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Cc: Pawel Osciak <pawel@osciak.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arm: mm: dma-mapping: convert to use vm_map_pages()

Convert to use vm_map_pages() to map range of kernel memory to user vma.

Link: http://lkml.kernel.org/r/936e5e107c746a7310e3a3c471188ca3ac8f9754.1552921225.git.jrdr.linux@gmail.com
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Cc: Pawel Osciak <pawel@osciak.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: introduce new vm_map_pages() and vm_map_pages_zero() API

Patch series "mm: Use vm_map_pages() and vm_map_pages_zero() API", v5.

This patch (of 5):

Previouly drivers have their own way of mapping range of kernel
pages/memory into user vma and this was done by invoking vm_insert_page()
within a loop.

As this pattern is common across different drivers, it can be generalized
by creating new functions and using them across the drivers.

vm_map_pages() is the API which can be used to map kernel memory/pages in
drivers which have considered vm_pgoff

vm_map_pages_zero() is the API which can be used to map a range of kernel
memory/pages in drivers which have not considered vm_pgoff.  vm_pgoff is
passed as default 0 for those drivers.

We _could_ then at a later "fix" these drivers which are using
vm_map_pages_zero() to behave according to the normal vm_pgoff offsetting
simply by removing the _zero suffix on the function name and if that
causes regressions, it gives us an easy way to revert.

Tested on Rockchip hardware and display is working, including talking to
Lima via prime.

Link: http://lkml.kernel.org/r/751cb8a0f4c3e67e95c58a3b072937617f338eea.1552921225.git.jrdr.linux@gmail.com
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Suggested-by: Russell King <linux@armlinux.org.uk>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Rik van Riel <riel@surriel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Pawel Osciak <pawel@osciak.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: remove redundant 'default n' from Kconfig-s

'default n' is the default value for any bool or tristate Kconfig
setting so there is no need to write it explicitly.

Also since commit f467c5640c29 ("kconfig: only write '# CONFIG_FOO
is not set' for visible symbols") the Kconfig behavior is the same
regardless of 'default n' being present or not:

    ...
    One side effect of (and the main motivation for) this change is making
    the following two definitions behave exactly the same:

        config FOO
                bool

        config FOO
                bool
                default n

    With this change, neither of these will generate a
    '# CONFIG_FOO is not set' line (assuming FOO isn't selected/implied).
    That might make it clearer to people that a bare 'default n' is
    redundant.
    ...

Link: http://lkml.kernel.org/r/c3385916-e4d4-37d3-b330-e6b7dff83a52@samsung.com
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: fix false-positive OVERCOMMIT_GUESS failures

With the default overcommit==guess we occasionally run into mmap
rejections despite plenty of memory that would get dropped under
pressure but just isn't accounted reclaimable. One example of this is
dying cgroups pinned by some page cache. A previous case was auxiliary
path name memory associated with dentries; we have since annotated
those allocations to avoid overcommit failures (see d79f7aa496fc ("mm:
treat indirectly reclaimable memory as free in overcommit logic")).

But trying to classify all allocated memory reliably as reclaimable
and unreclaimable is a bit of a fool's errand. There could be a myriad
of dependencies that constantly change with kernel versions.

It becomes even more questionable of an effort when considering how
this estimate of available memory is used: it's not compared to the
system-wide allocated virtual memory in any way. It's not even
compared to the allocating process's address space. It's compared to
the single allocation request at hand!

So we have an elaborate left-hand side of the equation that tries to
assess the exact breathing room the system has available down to a
page - and then compare it to an isolated allocation request with no
additional context. We could fail an allocation of N bytes, but for
two allocations of N/2 bytes we'd do this elaborate dance twice in a
row and then still let N bytes of virtual memory through. This doesn't
make a whole lot of sense.

Let's take a step back and look at the actual goal of the
heuristic. From the documentation:

   Heuristic overcommit handling. Obvious overcommits of address
   space are refused. Used for a typical system. It ensures a
   seriously wild allocation fails while allowing overcommit to
   reduce swap usage.  root is allowed to allocate slightly more
   memory in this mode. This is the default.

If all we want to do is catch clearly bogus allocation requests
irrespective of the general virtual memory situation, the physical
memory counter-part doesn't need to be that complicated, either.

When in GUESS mode, catch wild allocations by comparing their request
size to total amount of ram and swap in the system.

Link: http://lkml.kernel.org/r/20190412191418.26333-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memory_hotplug: make __remove_pages() and arch_remove_memory() never fail

All callers of arch_remove_memory() ignore errors.  And we should really
try to remove any errors from the memory removal path.  No more errors are
reported from __remove_pages().  BUG() in s390x code in case
arch_remove_memory() is triggered.  We may implement that properly later.
WARN in case powerpc code failed to remove the section mapping, which is
better than ignoring the error completely right now.

Link: http://lkml.kernel.org/r/20190409100148.24703-5-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Oscar Salvador <osalvador@suse.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Arun KS <arunks@codeaurora.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Mathieu Malaterre <malat@debian.org>
Cc: Andrew Banman <andrew.banman@hpe.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mike Travis <mike.travis@hpe.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memory_hotplug: make __remove_section() never fail

Let's just warn in case a section is not valid instead of failing to
remove somewhere in the middle of the process, returning an error that
will be mostly ignored by callers.

Link: http://lkml.kernel.org/r/20190409100148.24703-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Arun KS <arunks@codeaurora.org>
Cc: Mathieu Malaterre <malat@debian.org>
Cc: Andrew Banman <andrew.banman@hpe.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Mike Travis <mike.travis@hpe.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memory_hotplug: make unregister_memory_section() never fail

Failing while removing memory is mostly ignored and cannot really be
handled.  Let's treat errors in unregister_memory_section() in a nice way,
warning, but continuing.

Link: http://lkml.kernel.org/r/20190409100148.24703-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Banman <andrew.banman@hpe.com>
Cc: Mike Travis <mike.travis@hpe.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Arun KS <arunks@codeaurora.org>
Cc: Mathieu Malaterre <malat@debian.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memory_hotplug: release memory resource after arch_remove_memory()

Patch series "mm/memory_hotplug: Better error handling when removing
memory", v1.

Error handling when removing memory is somewhat messed up right now.  Some
errors result in warnings, others are completely ignored.  Memory unplug
code can essentially not deal with errors properly as of now.
remove_memory() will never fail.

We have basically two choices:
1. Allow arch_remov_memory() and friends to fail, propagating errors via
   remove_memory(). Might be problematic (e.g. DIMMs consisting of multiple
   pieces added/removed separately).
2. Don't allow the functions to fail, handling errors in a nicer way.

It seems like most errors that can theoretically happen are really corner
cases and mostly theoretical (e.g.  "section not valid").  However e.g.
aborting removal of sections while all callers simply continue in case of
errors is not nice.

If we can gurantee that removal of memory always works (and WARN/skip in
case of theoretical errors so we can figure out what is going on), we can
go ahead and implement better error handling when adding memory.

E.g. via add_memory():

arch_add_memory()
ret = do_stuff()
if (ret) {
arch_remove_memory();
goto error;
}

Handling here that arch_remove_memory() might fail is basically
impossible.  So I suggest, let's avoid reporting errors while removing
memory, warning on theoretical errors instead and continuing instead of
aborting.

This patch (of 4):

__add_pages() doesn't add the memory resource, so __remove_pages()
shouldn't remove it.  Let's factor it out.  Especially as it is a special
case for memory used as system memory, added via add_memory() and friends.

We now remove the resource after removing the sections instead of doing it
the other way around.  I don't think this change is problematic.

add_memory()
register memory resource
arch_add_memory()

remove_memory
arch_remove_memory()
release memory resource

While at it, explain why we ignore errors and that it only happeny if
we remove memory in a different granularity as we added it.

[david@redhat.com: fix printk warning]
Link: http://lkml.kernel.org/r/20190417120204.6997-1-david@redhat.com
Link: http://lkml.kernel.org/r/20190409100148.24703-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Arun KS <arunks@codeaurora.org>
Cc: Mathieu Malaterre <malat@debian.org>
Cc: Andrew Banman <andrew.banman@hpe.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Mike Travis <mike.travis@hpe.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/filemap.c: fix minor typo

Link: http://lkml.kernel.org/r/20190304155240.19215-1-ldufour@linux.ibm.com
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, memory_hotplug: provide a more generic restrictions for memory hotplug

arch_add_memory, __add_pages take a want_memblock which controls whether
the newly added memory should get the sysfs memblock user API (e.g.
ZONE_DEVICE users do not want/need this interface).  Some callers even
want to control where do we allocate the memmap from by configuring
altmap.

Add a more generic hotplug context for arch_add_memory and __add_pages.
struct mhp_restrictions contains flags which contains additional features
to be enabled by the memory hotplug (MHP_MEMBLOCK_API currently) and
altmap for alternative memmap allocator.

This patch shouldn't introduce any functional change.

[akpm@linux-foundation.org: build fix]
Link: http://lkml.kernel.org/r/20190408082633.2864-3-osalvador@suse.de
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, memory_hotplug: cleanup memory offline path

check_pages_isolated_cb currently accounts the whole pfn range as being
offlined if test_pages_isolated suceeds on the range.  This is based on
the assumption that all pages in the range are freed which is currently
the case in most cases but it won't be with later changes, as pages marked
as vmemmap won't be isolated.

Move the offlined pages counting to offline_isolated_pages_cb and rely on
__offline_isolated_pages to return the correct value.
check_pages_isolated_cb will still do it's primary job and check the pfn
range.

While we are at it remove check_pages_isolated and offline_isolated_pages
and use directly walk_system_ram_range as do in online_pages.

Link: http://lkml.kernel.org/r/20190408082633.2864-2-osalvador@suse.de
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: initialize MAX_ORDER_NR_PAGES at a time instead of doing larger sections

Add yet another iterator, for_each_free_mem_range_in_zone_from, and then
use it to support initializing and freeing pages in groups no larger than
MAX_ORDER_NR_PAGES.  By doing this we can greatly improve the cache
locality of the pages while we do several loops over them in the init and
freeing process.

We are able to tighten the loops further as a result of the "from"
iterator as we can perform the initial checks for first_init_pfn in our
first call to the iterator, and continue without the need for those checks
via the "from" iterator.  I have added this functionality in the function
called deferred_init_mem_pfn_range_in_zone that primes the iterator and
causes us to exit if we encounter any failure.

On my x86_64 test system with 384GB of memory per node I saw a reduction
in initialization time from 1.85s to 1.38s as a result of this patch.

Link: http://lkml.kernel.org/r/20190405221231.12227.85836.stgit@localhost.localdomain
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: <yi.z.zhang@linux.intel.com>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Pavel Tatashin <pavel.tatashin@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: implement new zone specific memblock iterator

Introduce a new iterator for_each_free_mem_pfn_range_in_zone.

This iterator will take care of making sure a given memory range provided
is in fact contained within a zone.  It takes are of all the bounds
checking we were doing in deferred_grow_zone, and deferred_init_memmap.
In addition it should help to speed up the search a bit by iterating until
the end of a range is greater than the start of the zone pfn range, and
will exit completely if the start is beyond the end of the zone.

Link: http://lkml.kernel.org/r/20190405221225.12227.22573.stgit@localhost.localdomain
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <yi.z.zhang@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: drop meminit_pfn_in_nid as it is redundant

As best as I can tell the meminit_pfn_in_nid call is completely redundant.
The deferred memory initialization is already making use of
for_each_free_mem_range which in turn will call into __next_mem_range
which will only return a memory range if it matches the node ID provided
assuming it is not NUMA_NO_NODE.

I am operating on the assumption that there are no zones or pgdata_t
structures that have a NUMA node of NUMA_NO_NODE associated with them.  If
that is the case then __next_mem_range will never return a memory range
that doesn't match the zone's node ID and as such the check is redundant.

So one piece I would like to verify on this is if this works for ia64.
Technically it was using a different approach to get the node ID, but it
seems to have the node ID also encoded into the memblock.  So I am
assuming this is okay, but would like to get confirmation on that.

On my x86_64 test system with 384GB of memory per node I saw a reduction
in initialization time from 2.80s to 1.85s as a result of this patch.

Link: http://lkml.kernel.org/r/20190405221219.12227.93957.stgit@localhost.localdomain
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <yi.z.zhang@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: use mm_zero_struct_page from SPARC on all 64b architectures

Patch series "Deferred page init improvements", v7.

This patchset is essentially a refactor of the page initialization logic
that is meant to provide for better code reuse while providing a
significant improvement in deferred page initialization performance.

In my testing on an x86_64 system with 384GB of RAM I have seen the
following.  In the case of regular memory initialization the deferred init
time was decreased from 3.75s to 1.38s on average.  This amounts to a 172%
improvement for the deferred memory initialization performance.

I have called out the improvement observed with each patch.

This patch (of 4):

Use the same approach that was already in use on Sparc on all the
architectures that support a 64b long.

This is mostly motivated by the fact that 7 to 10 store/move instructions
are likely always going to be faster than having to call into a function
that is not specialized for handling page init.

An added advantage to doing it this way is that the compiler can get away
with combining writes in the __init_single_page call.  As a result the
memset call will be reduced to only about 4 write operations, or at least
that is what I am seeing with GCC 6.2 as the flags, LRU pointers, and
count/mapcount seem to be cancelling out at least 4 of the 8 assignments
on my system.

One change I had to make to the function was to reduce the minimum page
size to 56 to support some powerpc64 configurations.

This change should introduce no change on SPARC since it already had this
code.  In the case of x86_64 I saw a reduction from 3.75s to 2.80s when
initializing 384GB of RAM per node.  Pavel Tatashin tested on a system
with Broadcom's Stingray CPU and 48GB of RAM and found that
__init_single_page() takes 19.30ns / 64-byte struct page before this patch
and with this patch it takes 17.33ns / 64-byte struct page.  Mike Rapoport
ran a similar test on a OpenPower (S812LC 8348-21C) with Power8 processor
and 128GB or RAM.  His results per 64-byte struct page were 4.68ns before,
and 4.59ns after this patch.

Link: http://lkml.kernel.org/r/20190405221213.12227.9392.stgit@localhost.localdomain
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <yi.z.zhang@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/rmap.c: use the pra.mapcount to do the check

We have the pra.mapcount already, and there is no need to call the
page_mapped() which may do some complicated computing for compound page.

Link: http://lkml.kernel.org/r/20190404054828.2731-1-sjhuang@iluvatar.ai
Signed-off-by: Huang Shijie <sjhuang@iluvatar.ai>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/filemap.c: enable error injection at add_to_page_cache()

Recently I messed up the error handling in filemap_fault() because of an
unexpected ENOMEM (related to cgroup memory limits) in add_to_page_cache.
Enable error injection at this point so I can add a testcase to xfstests
to verify I don't mess this up again.

[akpm@linux-foundation.org: include linux/error-injection.h]
Link: http://lkml.kernel.org/r/20190403152604.14008-1-josef@toxicpanda.com
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/mmu_notifier: mmu_notifier_range_update_to_read_only() helper

Helper to test if a range is updated to read only (it is still valid to
read from the range).  This is useful for device driver or anyone who wish
to optimize out update when they know that they already have the range map
read only.

Link: http://lkml.kernel.org/r/20190326164747.24405-9-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krcmar <rkrcmar@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/mmu_notifier: pass down vma and reasons why mmu notifier is happening

CPU page table update can happens for many reasons, not only as a result
of a syscall (munmap(), mprotect(), mremap(), madvise(), ...) but also as
a result of kernel activities (memory compression, reclaim, migration,
...).

Users of mmu notifier API track changes to the CPU page table and take
specific action for them.  While current API only provide range of virtual
address affected by the change, not why the changes is happening

This patch is just passing down the new informations by adding it to the
mmu_notifier_range structure.

Link: http://lkml.kernel.org/r/20190326164747.24405-8-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krcmar <rkrcmar@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/mmu_notifier: use correct mmu_notifier events for each invalidation

This updates each existing invalidation to use the correct mmu notifier
event that represent what is happening to the CPU page table.  See the
patch which introduced the events to see the rational behind this.

Link: http://lkml.kernel.org/r/20190326164747.24405-7-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krcmar <rkrcmar@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/mmu_notifier: contextual information for event triggering invalidation

CPU page table update can happens for many reasons, not only as a result
of a syscall (munmap(), mprotect(), mremap(), madvise(), ...) but also as
a result of kernel activities (memory compression, reclaim, migration,
...).

Users of mmu notifier API track changes to the CPU page table and take
specific action for them.  While current API only provide range of virtual
address affected by the change, not why the changes is happening.

This patchset do the initial mechanical convertion of all the places that
calls mmu_notifier_range_init to also provide the default MMU_NOTIFY_UNMAP
event as well as the vma if it is know (most invalidation happens against
a given vma).  Passing down the vma allows the users of mmu notifier to
inspect the new vma page protection.

The MMU_NOTIFY_UNMAP is always the safe default as users of mmu notifier
should assume that every for the range is going away when that event
happens.  A latter patch do convert mm call path to use a more appropriate
events for each call.

This is done as 2 patches so that no call site is forgotten especialy
as it uses this following coccinelle patch:

%<----------------------------------------------------------------------
@@
identifier I1, I2, I3, I4;
@@
static inline void mmu_notifier_range_init(struct mmu_notifier_range *I1,
+enum mmu_notifier_event event,
+unsigned flags,
+struct vm_area_struct *vma,
struct mm_struct *I2, unsigned long I3, unsigned long I4) { ... }

@@
@@
-#define mmu_notifier_range_init(range, mm, start, end)
+#define mmu_notifier_range_init(range, event, flags, vma, mm, start, end)

@@
expression E1, E3, E4;
identifier I1;
@@
<...
mmu_notifier_range_init(E1,
+MMU_NOTIFY_UNMAP, 0, I1,
I1->vm_mm, E3, E4)
...>

@@
expression E1, E2, E3, E4;
identifier FN, VMA;
@@
FN(..., struct vm_area_struct *VMA, ...) {
<...
mmu_notifier_range_init(E1,
+MMU_NOTIFY_UNMAP, 0, VMA,
E2, E3, E4)
...> }

@@
expression E1, E2, E3, E4;
identifier FN, VMA;
@@
FN(...) {
struct vm_area_struct *VMA;
<...
mmu_notifier_range_init(E1,
+MMU_NOTIFY_UNMAP, 0, VMA,
E2, E3, E4)
...> }

@@
expression E1, E2, E3, E4;
identifier FN;
@@
FN(...) {
<...
mmu_notifier_range_init(E1,
+MMU_NOTIFY_UNMAP, 0, NULL,
E2, E3, E4)
...> }
---------------------------------------------------------------------->%

Applied with:
spatch --all-includes --sp-file mmu-notifier.spatch fs/proc/task_mmu.c --in-place
spatch --sp-file mmu-notifier.spatch --dir kernel/events/ --in-place
spatch --sp-file mmu-notifier.spatch --dir mm --in-place

Link: http://lkml.kernel.org/r/20190326164747.24405-6-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krcmar <rkrcmar@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/mmu_notifier: contextual information for event enums

CPU page table update can happens for many reasons, not only as a result
of a syscall (munmap(), mprotect(), mremap(), madvise(), ...) but also as
a result of kernel activities (memory compression, reclaim, migration,
...).

This patch introduce a set of enums that can be associated with each of
the events triggering a mmu notifier.  Latter patches take advantages of
those enum values.

    - UNMAP: munmap() or mremap()
    - CLEAR: page table is cleared (migration, compaction, reclaim, ...)
    - PROTECTION_VMA: change in access protections for the range
    - PROTECTION_PAGE: change in access protections for page in the range
    - SOFT_DIRTY: soft dirtyness tracking

Being able to identify munmap() and mremap() from other reasons why the
page table is cleared is important to allow user of mmu notifier to update
their own internal tracking structure accordingly (on munmap or mremap it
is not longer needed to track range of virtual address as it becomes
invalid).

Link: http://lkml.kernel.org/r/20190326164747.24405-5-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krcmar <rkrcmar@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/mmu_notifier: convert mmu_notifier_range->blockable to a flags

Use an unsigned field for flags other than blockable and convert the
blockable field to be one of those flags.

Link: http://lkml.kernel.org/r/20190326164747.24405-4-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krcmar <rkrcmar@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/mmu_notifier: convert user range->blockable to helper function

Use the mmu_notifier_range_blockable() helper function instead of directly
dereferencing the range->blockable field.  This is done to make it easier
to change the mmu_notifier range field.

This patch is the outcome of the following coccinelle patch:

%<-------------------------------------------------------------------
@@
identifier I1, FN;
@@
FN(..., struct mmu_notifier_range *I1, ...) {
<...
-I1->blockable
+mmu_notifier_range_blockable(I1)
...>
}
------------------------------------------------------------------->%

spatch --in-place --sp-file blockable.spatch --dir .

Link: http://lkml.kernel.org/r/20190326164747.24405-3-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krcmar <rkrcmar@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/mmu_notifier: helper to test if a range invalidation is blockable

Patch series "mmu notifier provide context informations", v6.

Here I am not posting users of this, they already have been posted to
appropriate mailing list [6] and will be merge through the appropriate
tree once this patchset is upstream.

Note that this serie does not change any behavior for any existing code.
It just pass down more information to mmu notifier listener.

The rationale for this patchset:

CPU page table update can happens for many reasons, not only as a result
of a syscall (munmap(), mprotect(), mremap(), madvise(), ...) but also as
a result of kernel activities (memory compression, reclaim, migration,
...).

This patchset introduce a set of enums that can be associated with each of
the events triggering a mmu notifier:

    - UNMAP: munmap() or mremap()
    - CLEAR: page table is cleared (migration, compaction, reclaim, ...)
    - PROTECTION_VMA: change in access protections for the range
    - PROTECTION_PAGE: change in access protections for page in the range
    - SOFT_DIRTY: soft dirtyness tracking

Being able to identify munmap() and mremap() from other reasons why the
page table is cleared is important to allow user of mmu notifier to update
their own internal tracking structure accordingly (on munmap or mremap it
is not longer needed to track range of virtual address as it becomes
invalid).  Without this serie, driver are force to assume that every
notification is an munmap which triggers useless trashing within drivers
that associate structure with range of virtual address.  Each driver is
force to free up its tracking structure and then restore it on next device
page fault.  With this series we can also optimize device page table update.  Patches to use this are at

https://lkml.org/lkml/2019/1/23/833
https://lkml.org/lkml/2019/1/23/834
https://lkml.org/lkml/2019/1/23/832
https://lkml.org/lkml/2019/1/23/831

Moreover this can also be used to optimize out some page table updates
such as for KVM where we can update the secondary MMU directly from the
callback instead of clearing it.

ACKS AMD/RADEON https://lkml.org/lkml/2019/2/1/395
ACKS RDMA https://lkml.org/lkml/2018/12/6/1473

This patch (of 8):

Simple helpers to test if range invalidation is blockable.  Latter patches
use cocinnelle to convert all direct dereference of range-> blockable to
use this function instead so that we can convert the blockable field to an
unsigned for more flags.

Link: http://lkml.kernel.org/r/20190326164747.24405-2-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krcmar <rkrcmar@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/hmm: convert various hmm_pfn_* to device_entry which is a better name

Convert hmm_pfn_* to device_entry_* as here we are dealing with device
driver specific entry format and hmm provide helpers to allow differents
components (including HMM) to create/parse device entry.

We keep wrapper with the old name so that we can convert driver to use the
new API in stages in each device driver tree.  This will get remove once
all driver are converted.

Link: http://lkml.kernel.org/r/20190403193318.16478-13-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/hmm: add a helper function that fault pages and map them to a device

This is a all in one helper that fault pages in a range and map them to a
device so that every single device driver do not have to re-implement this
common pattern.

This is taken from ODP RDMA in preparation of ODP RDMA convertion.  It
will be use by nouveau and other drivers.

[jglisse@redhat.com: Was using wrong field and wrong enum]
Link: http://lkml.kernel.org/r/20190409175340.26614-1-jglisse@redhat.com
Link: http://lkml.kernel.org/r/20190403193318.16478-12-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/hmm: add helpers to test if mm is still alive or not

The device driver can have kernel thread or worker doing work against a
process mm and it is useful for those to test wether the mm is dead or
alive to avoid doing useless work.  Add an helper to test that so that
driver can bail out early if a process is dying.

Note that the helper does not perform any lock synchronization and thus is
just a hint ie a process might be dying but the helper might still return
the process as alive.  All HMM functions are safe to use in that case as
HMM internal properly protect itself with lock.  If driver use this helper
with non HMM functions it should ascertain that it is safe to do so.

Link: http://lkml.kernel.org/r/20190403193318.16478-11-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/hmm: allow to mirror vma of a file on a DAX backed filesystem

HMM mirror is a device driver helpers to mirror range of virtual address.
It means that the process jobs running on the device can access the same
virtual address as the CPU threads of that process.  This patch adds
support for mirroring mapping of file that are on a DAX block device (ie
range of virtual address that is an mmap of a file in a filesystem on a
DAX block device).  There is no reason to not support such case when
mirroring virtual address on a device.

Note that unlike GUP code we do not take page reference hence when we
back-off we have nothing to undo.

[jglisse@redhat.com: move THP and hugetlbfs code path behind #if KCONFIG]
Link: http://lkml.kernel.org/r/20190422163741.13029-1-jglisse@redhat.com
Link: http://lkml.kernel.org/r/20190403193318.16478-10-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/hmm: mirror hugetlbfs (snapshoting, faulting and DMA mapping)

HMM mirror is a device driver helpers to mirror range of virtual address.
It means that the process jobs running on the device can access the same
virtual address as the CPU threads of that process.  This patch adds
support for hugetlbfs mapping (ie range of virtual address that are mmap
of a hugetlbfs).

[rcampbell@nvidia.com: fix initial PFN for hugetlbfs pages]
Link: http://lkml.kernel.org/r/20190419233536.8080-1-rcampbell@nvidia.com
Link: http://lkml.kernel.org/r/20190403193318.16478-9-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/hmm: add default fault flags to avoid the need to pre-fill pfns arrays

The HMM mirror API can be use in two fashions.  The first one where the
HMM user coalesce multiple page faults into one request and set flags per
pfns for of those faults.  The second one where the HMM user want to
pre-fault a range with specific flags.  For the latter one it is a waste
to have the user pre-fill the pfn arrays with a default flags value.

This patch adds a default flags value allowing user to set them for a
range without having to pre-fill the pfn array.

Link: http://lkml.kernel.org/r/20190403193318.16478-8-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/hmm: improve driver API to work and wait over a range

A common use case for HMM mirror is user trying to mirror a range and
before they could program the hardware it get invalidated by some core mm
event.  Instead of having user re-try right away to mirror the range
provide a completion mechanism for them to wait for any active
invalidation affecting the range.

This also changes how hmm_range_snapshot() and hmm_range_fault() works by
not relying on vma so that we can drop the mmap_sem when waiting and
lookup the vma again on retry.

Link: http://lkml.kernel.org/r/20190403193318.16478-7-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/hmm: improve and rename hmm_vma_fault() to hmm_range_fault()

Minor optimization around hmm_pte_need_fault().  Rename for consistency
between code, comments and documentation.  Also improves the comments on
all the possible returns values.  Improve the function by returning the
number of populated entries in pfns array.

Link: http://lkml.kernel.org/r/20190403193318.16478-6-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/hmm: improve and rename hmm_vma_get_pfns() to hmm_range_snapshot()

Rename for consistency between code, comments and documentation.  Also
improves the comments on all the possible returns values.  Improve the
function by returning the number of populated entries in pfns array.

Link: http://lkml.kernel.org/r/20190403193318.16478-5-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/hmm: do not erase snapshot when a range is invalidated

Users of HMM might be using the snapshot information to do preparatory
step like dma mapping pages to a device before checking for invalidation
through hmm_vma_range_done() so do not erase that information and assume
users will do the right thing.

Link: http://lkml.kernel.org/r/20190403193318.16478-4-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/hmm: use reference counting for HMM struct

Every time I read the code to check that the HMM structure does not vanish
before it should thanks to the many lock protecting its removal i get a
headache.  Switch to reference counting instead it is much easier to
follow and harder to break.  This also remove some code that is no longer
needed with refcounting.

Link: http://lkml.kernel.org/r/20190403193318.16478-3-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/hmm: select mmu notifier when selecting HMM

To avoid random config build issue, select mmu notifier when HMM is
selected.  In any cases when HMM get selected it will be by users that
will also wants the mmu notifier.

Link: http://lkml.kernel.org/r/20190403193318.16478-2-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hugetlb: use same fault hash key for shared and private mappings

hugetlb uses a fault mutex hash table to prevent page faults of the
same pages concurrently.  The key for shared and private mappings is
different.  Shared keys off address_space and file index.  Private keys
off mm and virtual address.  Consider a private mappings of a populated
hugetlbfs file.  A fault will map the page from the file and if needed
do a COW to map a writable page.

Hugetlbfs hole punch uses the fault mutex to prevent mappings of file
pages.  It uses the address_space file index key.  However, private
mappings will use a different key and could race with this code to map
the file page.  This causes problems (BUG) for the page cache remove
code as it expects the page to be unmapped.  A sample stack is:

page dumped because: VM_BUG_ON_PAGE(page_mapped(page))
kernel BUG at mm/filemap.c:169!
...
RIP: 0010:unaccount_page_cache_page+0x1b8/0x200
...
Call Trace:
__delete_from_page_cache+0x39/0x220
delete_from_page_cache+0x45/0x70
remove_inode_hugepages+0x13c/0x380
? __add_to_page_cache_locked+0x162/0x380
hugetlbfs_fallocate+0x403/0x540
? _cond_resched+0x15/0x30
? __inode_security_revalidate+0x5d/0x70
? selinux_file_permission+0x100/0x130
vfs_fallocate+0x13f/0x270
ksys_fallocate+0x3c/0x80
__x64_sys_fallocate+0x1a/0x20
do_syscall_64+0x5b/0x180
entry_SYSCALL_64_after_hwframe+0x44/0xa9

There seems to be another potential COW issue/race with this approach
of different private and shared keys as noted in commit 8382d914ebf7
("mm, hugetlb: improve page-fault scalability").

Since every hugetlb mapping (even anon and private) is actually a file
mapping, just use the address_space index key for all mappings.  This
results in potentially more hash collisions.  However, this should not
be the common case.

Link: http://lkml.kernel.org/r/20190328234704.27083-3-mike.kravetz@oracle.com
Link: http://lkml.kernel.org/r/20190412165235.t4sscoujczfhuiyt@linux-r8p5
Fixes: b5cec28d36f5 ("hugetlbfs: truncate_hugepages() takes a range of pages")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hugetlbfs: on restore reserve error path retain subpool reservation

When a huge page is allocated, PagePrivate() is set if the allocation
consumed a reservation.  When freeing a huge page, PagePrivate is checked.
If set, it indicates the reservation should be restored.  PagePrivate
being set at free huge page time mostly happens on error paths.

When huge page reservations are created, a check is made to determine if
the mapping is associated with an explicitly mounted filesystem.  If so,
pages are also reserved within the filesystem.  The default action when
freeing a huge page is to decrement the usage count in any associated
explicitly mounted filesystem.  However, if the reservation is to be
restored the reservation/use count within the filesystem should not be
decrementd.  Otherwise, a subsequent page allocation and free for the same
mapping location will cause the file filesystem usage to go 'negative'.

Filesystem                         Size  Used Avail Use% Mounted on
nodev                              4.0G -4.0M  4.1G    - /opt/hugepool

To fix, when freeing a huge page do not adjust filesystem usage if
PagePrivate() is set to indicate the reservation should be restored.

I did not cc stable as the problem has been around since reserves were
added to hugetlbfs and nobody has noticed.

Link: http://lkml.kernel.org/r/20190328234704.27083-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/base/memory.c: clean up relics in function parameters

The input parameter 'phys_index' of memory_block_action() is actually the
section number, but not the phys_index of memory_block.  This is a relic
from the past when one memory block could only contain one section.
Rename it to start_section_nr.

And also in remove_memory_section(), the 'node_id' and 'phys_device'
arguments are not used by anyone.  Remove them.

Link: http://lkml.kernel.org/r/20190329144250.14315-2-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/sparse.c: clean up obsolete code comment

The code comment above sparse_add_one_section() is obsolete and incorrect.
Clean it up and write a new one.

Link: http://lkml.kernel.org/r/20190329144250.14315-1-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>