John Crispin [Thu, 8 Jan 2015 21:23:18 +0000 (21:23 +0000)]
kernel: add SECCOMP to menuconfig
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43888
John Crispin [Thu, 8 Jan 2015 20:26:52 +0000 (20:26 +0000)]
base-files: Fix switch settings for uci-defaults-new.sh.
The enable and reset settings need to be added even when they're false. This is true at least for 'enable', that seems to default to true otherwise.
Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
SVN-Revision: 43887
John Crispin [Thu, 8 Jan 2015 20:26:41 +0000 (20:26 +0000)]
openvpn: procd_set_param respawn
Makes sure that the openvpn instance gets restarted in case of a crash.
Intentional stops using /etc/init.d/openvpn stop will not result in
respawning. Anything else will, e.g. killall openvpn.
Signed-off-by: Lars Gierth <larsg@systemli.org>
SVN-Revision: 43886
John Crispin [Thu, 8 Jan 2015 20:26:34 +0000 (20:26 +0000)]
gemini: add ata driver
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 43885
John Crispin [Thu, 8 Jan 2015 20:26:27 +0000 (20:26 +0000)]
gemini: add rtc-gemini driver
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 43884
John Crispin [Thu, 8 Jan 2015 20:26:20 +0000 (20:26 +0000)]
ramips: Fix HooToo HT-TM02 support.
- Fix LED definitions.
- Add mode-switch slider definition (at GPIO 14).
- Remove unneeded VLAN now that the ethernet driver is fixed and TCP packets get passed correctly now. (This router only has one port.)
- Fix LAN port MAC address, which is defined in the factory partition as WLAN MAC address + 1.
- Fix board name, as the company name is HooToo and not HOOTOO.
- Remove unnecessary packages from the profile. (The end-user is supposed to use mechanisms such as the ImageBuilder in order to add his own set of packages to his own images... while the precompiled images should just contain the core set of packages needed to run the base functions of a wireless router.)
Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
SVN-Revision: 43883
John Crispin [Thu, 8 Jan 2015 20:26:13 +0000 (20:26 +0000)]
ramips: Fix for gpio falling interrupt mask
This patch fixes a wrong mask operation for the rt2880-compatible ralink devices.
The mask operation reads the actual flags and then logical combines it with the pin flag it want to set.
Unfortunally, for rising as for falling interrupt flags the actual flag status of the rising interrupts was used.
That caused a problem if you want to use more than one falling GPIO interrupt.
Now the correct (seperated) actual status is used for both, falling and rising.
Signed-off-by: Jonas Arndt <info@greenwire-elektronik.de>
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43882
John Crispin [Thu, 8 Jan 2015 20:26:02 +0000 (20:26 +0000)]
ramips: update BR-6475ND dts
Update firmware location for 2.4GHz radio on the Edimax BR-6475nD.
Signed-off-by: Christopher Lais <chris+openwrt@zenthought.org>
SVN-Revision: 43881
John Crispin [Thu, 8 Jan 2015 20:25:55 +0000 (20:25 +0000)]
ramips: base-files: Whitespace fixes.
Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
SVN-Revision: 43880
John Crispin [Thu, 8 Jan 2015 20:25:48 +0000 (20:25 +0000)]
lantiq: BT Home Hub 3A - userspace
BT Home Hub 3A - userspace
Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>
SVN-Revision: 43879
John Crispin [Thu, 8 Jan 2015 20:25:41 +0000 (20:25 +0000)]
lantiq: BT Home Hub 3A - profile
BT Home Hub 3A - profile
Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>
SVN-Revision: 43878
John Crispin [Thu, 8 Jan 2015 20:25:35 +0000 (20:25 +0000)]
lantiq: BT Home Hub3A - device tree
BT Home Hub3A - device tree
Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>
SVN-Revision: 43877
John Crispin [Thu, 8 Jan 2015 20:25:28 +0000 (20:25 +0000)]
lantiq: Fix adsl led on Home Hub 2B
This fixes the adsl led on the Home Hub 2B.
Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>
SVN-Revision: 43876
Steven Barth [Thu, 8 Jan 2015 18:29:26 +0000 (18:29 +0000)]
openssl: bump to 1.0.1j
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 43875
Jo-Philipp Wich [Thu, 8 Jan 2015 16:10:46 +0000 (16:10 +0000)]
firewall: respect src_dip option for reflection (#18544)
Also fix wrong IPv4 netmask calculation on x86-64, thanks Ulrich Weber.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43874
Felix Fietkau [Thu, 8 Jan 2015 14:33:53 +0000 (14:33 +0000)]
scripts/config: sync with linux upstream
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43873
Jo-Philipp Wich [Thu, 8 Jan 2015 12:46:44 +0000 (12:46 +0000)]
base-files: update default url template and complete kconfig help
Change the kconfig default for the repository url template to use "%s"
instead of "%T" as well.
Also complete the kconfig help text do cover the recently introduced
manufacturer, product and hwrev options.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43872
Jo-Philipp Wich [Thu, 8 Jan 2015 12:46:37 +0000 (12:46 +0000)]
version.mk: add "%s" placeholder for dotted target.subtarget notation
Implement "%s" placeholder that expands to either the target name,
e.g. "ar71xx" if the subtarget is generic or to target.subtarget, e.g.
"ar71xx.nand" is a subtarget is choosen.
Also change the default repository url template to use "%s" instead
of "%T" to reflect the directory structure used by the buildbot systems.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43871
Steven Barth [Thu, 8 Jan 2015 11:31:36 +0000 (11:31 +0000)]
nftables: bump to latest git / all patches upstreamed
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 43870
Jo-Philipp Wich [Thu, 8 Jan 2015 11:02:00 +0000 (11:02 +0000)]
build: add version number to filenames
This commit introduces a new option CONFIG_VERSION_FILENAMES which causes
OpenWrt to embed the version number in generated image files, SDK- and
ImageBuilder archives.
The option is enabled by default if CONFIG_VERSIONOPT is set.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43869
Rafał Miłecki [Wed, 7 Jan 2015 17:10:02 +0000 (17:10 +0000)]
fstools: update to the latest git HEAD
This allows using UBIFS volume as overlay and adds support for Btrfs.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43868
Felix Fietkau [Wed, 7 Jan 2015 16:02:59 +0000 (16:02 +0000)]
package/binutils: actually support the target toolchain
This fixes a bug, where ld on ARM EABI platforms expects OABI code.
Signed-off-by: Harald Geyer <harald@ccbib.org>
SVN-Revision: 43866
Jo-Philipp Wich [Tue, 6 Jan 2015 12:42:38 +0000 (12:42 +0000)]
qos-scripts: bump PKG_REVISION and copyright year
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43860
Jo-Philipp Wich [Tue, 6 Jan 2015 12:41:22 +0000 (12:41 +0000)]
openvpn: bump PKG_REVISION and copyright year
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43859
Steven Barth [Tue, 6 Jan 2015 09:59:55 +0000 (09:59 +0000)]
openssl: fix CVE-2014-3569
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 43858
Felix Fietkau [Mon, 5 Jan 2015 21:37:29 +0000 (21:37 +0000)]
kernel: add missing dependency for kmod-crypto-ghash
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43857
Felix Fietkau [Mon, 5 Jan 2015 21:37:21 +0000 (21:37 +0000)]
lantiq: add missing NAND_WRITE_DATA in NAND driver.
Signed-off-by: Sylwester Petela <sscapi@gmail.com>
SVN-Revision: 43856
Imre Kaloz [Mon, 5 Jan 2015 15:08:20 +0000 (15:08 +0000)]
refresh kernel config, add cpuidle and cpufreq support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 43855
Imre Kaloz [Mon, 5 Jan 2015 15:02:18 +0000 (15:02 +0000)]
enable swconfig and the mvsw6171 driver
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 43854
Felix Fietkau [Mon, 5 Jan 2015 13:19:20 +0000 (13:19 +0000)]
mac80211: fix ad-hoc basic/multicast rate regression from r43782
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43853
Felix Fietkau [Mon, 5 Jan 2015 13:03:55 +0000 (13:03 +0000)]
nettle: add CONFIG_LIBNETTLE_MINI to PKG_CONFIG_DEPENDS to fix rebuild issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43852
Felix Fietkau [Mon, 5 Jan 2015 13:03:48 +0000 (13:03 +0000)]
dnsmasq: fix dependency problems of the dnsmasq-full variant.
This patch tries to
- Let the DHCPv6 feature depend on CONFIG_IPV6.
- Conditionally select libnettle, kmod-ipv6, kmod-ipt-ipset only if the
corresponding features are enabled.
- Install `trust-anchors.conf` only if DNSSEC is selected.
- Add PKG_CONFIG_DEPENDS for the configurable options.
- Add a patch to let the Makefile of dnsmasq be aware of changes in
COPTS variable.
Big thanks goes to Frank Schäfer <fschaefer.oss@googlemail.com> for
providing necessary information on connections and dependency relations
between these CONFIGs and packages.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 43851
Felix Fietkau [Mon, 5 Jan 2015 13:03:40 +0000 (13:03 +0000)]
package: remove references to symbols TARGET_{ps3,pxcab}.
Target pxcab and ps3 were removed from maintaince in r34764 and r34765
respectively.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 43850
Felix Fietkau [Mon, 5 Jan 2015 13:03:33 +0000 (13:03 +0000)]
e2fsprogs: bump release
Signed-off-by: Maxim Storchak <m.storchak@gmail.com>
SVN-Revision: 43849
Felix Fietkau [Mon, 5 Jan 2015 13:03:26 +0000 (13:03 +0000)]
e2fsprogs: package dumpe2fs, e2freefrag, filefrag, debugfs
Signed-off-by: Maxim Storchak <m.storchak@gmail.com>
SVN-Revision: 43848
Felix Fietkau [Mon, 5 Jan 2015 13:03:20 +0000 (13:03 +0000)]
e2fsprogs: symlink e2fsck to fsck.ext{2, 3, 4}, and tune2fs to findfs
Signed-off-by: Maxim Storchak <m.storchak@gmail.com>
SVN-Revision: 43847
Felix Fietkau [Mon, 5 Jan 2015 13:03:12 +0000 (13:03 +0000)]
hostapd: Add uapsd option to netifd.sh
The uapsd option sets the uapsd_advertisement_enabled flag in hostapd.
The check for phy support is already implemented here in hostapd since 2011:
http://w1.fi/cgit/hostap/commit/?id=
70619a5d8a3d32faa43d66bcb1b670cacf0c243e
So this can be safely set to 1 as default.
Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
SVN-Revision: 43846
Felix Fietkau [Mon, 5 Jan 2015 13:03:07 +0000 (13:03 +0000)]
ar8216: factor out AR8327/AR8337-specific driver code into ar8327.c
Move all AR8327/AR8337-specific driver code into a separate source file
ar8327.c and adjust patches so that ar8327.c is compiled if
CONFIG_AR8216_PHY is set.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 43845
Felix Fietkau [Mon, 5 Jan 2015 13:02:57 +0000 (13:02 +0000)]
ar8216: move definitions from ar8216.c to ar8216.h and introduce ar8327.h
Move several structure definitions and #defines from ar8216.c
to ar8216.h and move AR8327/AR8337 header stuff into a new
header file ar8327.h.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 43844
Felix Fietkau [Mon, 5 Jan 2015 13:02:49 +0000 (13:02 +0000)]
kernel/hwmon: package pwm-fan kernel module
pwm-fan was introduced in kernel 3.18
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43843
Felix Fietkau [Mon, 5 Jan 2015 13:02:44 +0000 (13:02 +0000)]
all targets: remove all =m kernel config symbols
modules build during the kernel compile phase are ignored anyway,
all modules should be built using KernelPackage in
package/kernel/linux/modules/*
selecting the appropriate config symbols there rather than in
target/linux/*/config-*
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43842
Felix Fietkau [Mon, 5 Jan 2015 13:02:31 +0000 (13:02 +0000)]
kernel: bridge: multicast: backport a few more fixes for 3.10
The following patches unfortunately didn't hit the kernel stable
branches yet, therefore cherrypicking them for OpenWRT here:
* bridge: fix netfilter/NF_BR_LOCAL_OUT for own, locally generated queries
* bridge: multicast: enable snooping on general queries only
* bridge: multicast: add sanity check for general query destination
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
SVN-Revision: 43841
Felix Fietkau [Mon, 5 Jan 2015 13:02:26 +0000 (13:02 +0000)]
octeon: enable VLAN support
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 43840
Felix Fietkau [Mon, 5 Jan 2015 13:02:21 +0000 (13:02 +0000)]
octeon: remove config-default
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 43839
Felix Fietkau [Mon, 5 Jan 2015 13:02:14 +0000 (13:02 +0000)]
kernel/modules: add kmod-crypto-gcm
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 43838
Felix Fietkau [Mon, 5 Jan 2015 13:02:08 +0000 (13:02 +0000)]
kernel/modules: add kmod-crypto-ghash
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 43837
Felix Fietkau [Mon, 5 Jan 2015 13:02:01 +0000 (13:02 +0000)]
kernel/modules: kmod-crypto-xts: depend on kmod-crypto-gf128
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 43836
Felix Fietkau [Mon, 5 Jan 2015 13:01:56 +0000 (13:01 +0000)]
kernel/modules: add kmod-crypto-gf128
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 43835
Felix Fietkau [Mon, 5 Jan 2015 13:01:52 +0000 (13:01 +0000)]
kernel/modules: add kmod-crypto-ctr
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 43834
Felix Fietkau [Mon, 5 Jan 2015 13:01:42 +0000 (13:01 +0000)]
kernel/modules: add kmod-crypto-seqiv
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 43833
Felix Fietkau [Mon, 5 Jan 2015 13:01:36 +0000 (13:01 +0000)]
kernel/modules: remove CRYPTOMGR_MODULES
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 43832
Felix Fietkau [Mon, 5 Jan 2015 13:01:30 +0000 (13:01 +0000)]
kernel/modules: kmod-crypto-manager: depend on kmod-crypto-aead
SVN-Revision: 43831
Felix Fietkau [Mon, 5 Jan 2015 13:01:23 +0000 (13:01 +0000)]
kernel/modules: add kmod-crypto-aead
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 43830
Felix Fietkau [Mon, 5 Jan 2015 13:01:17 +0000 (13:01 +0000)]
kernel/modules: remove superfluous backslash
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 43829
Steven Barth [Mon, 5 Jan 2015 10:11:28 +0000 (10:11 +0000)]
util-linux: fix packaging issues
Signed-off-by: Gergely Kiss <mail.gery@gmail.com>
Tested-by: Gergely Kiss <mail.gery@gmail.com>
SVN-Revision: 43828
Imre Kaloz [Sun, 4 Jan 2015 18:41:32 +0000 (18:41 +0000)]
et131x is out of staging in 3.18
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 43827
Imre Kaloz [Sun, 4 Jan 2015 18:39:58 +0000 (18:39 +0000)]
upgrade to latest revision
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 43826
Imre Kaloz [Sun, 4 Jan 2015 17:26:07 +0000 (17:26 +0000)]
add tmp421 to the device tree instead of relying on autodetect
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 43825
Felix Fietkau [Sun, 4 Jan 2015 12:03:29 +0000 (12:03 +0000)]
openvpn: backport an upstream fix for a regression in using --cipher none (fixes #18676)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43823
Luka Perkov [Sat, 3 Jan 2015 22:59:47 +0000 (22:59 +0000)]
kernel: update 3.18 to 3.18.1
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43821
Luka Perkov [Sat, 3 Jan 2015 22:59:43 +0000 (22:59 +0000)]
kernel: update 3.14 to 3.14.27
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43820
Felix Fietkau [Sat, 3 Jan 2015 18:31:27 +0000 (18:31 +0000)]
ramips: fix WSR-600DHP flash layout
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43819
Felix Fietkau [Sat, 3 Jan 2015 18:31:17 +0000 (18:31 +0000)]
ramips: fix WSR-1166DHP flash layout
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43818
Felix Fietkau [Sat, 3 Jan 2015 18:31:11 +0000 (18:31 +0000)]
ramips: fix WSR-{600,1166} names
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43817
Felix Fietkau [Sat, 3 Jan 2015 18:31:06 +0000 (18:31 +0000)]
ramips: fix wsr-1166 sysupgrade support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43816
Felix Fietkau [Sat, 3 Jan 2015 18:30:57 +0000 (18:30 +0000)]
ramips: on mt7621 only enable xhci for the eval board (still needs patch cleanup to take effect)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43815
Felix Fietkau [Fri, 2 Jan 2015 21:53:45 +0000 (21:53 +0000)]
ramips: fix WSR-600 image format
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43814
Felix Fietkau [Fri, 2 Jan 2015 21:53:38 +0000 (21:53 +0000)]
ramips: use CONFIG_MTD_SPLIT_UIMAGE_FW instead of CONFIG_MTD_UIMAGE_SPLIT
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43813
Felix Fietkau [Fri, 2 Jan 2015 21:53:31 +0000 (21:53 +0000)]
ramips: fix image format for WSR-1166
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43812
Felix Fietkau [Fri, 2 Jan 2015 21:53:24 +0000 (21:53 +0000)]
ramips: disable ethernet checksum offloads for mt7621, they are broken
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43811
Felix Fietkau [Fri, 2 Jan 2015 21:53:18 +0000 (21:53 +0000)]
ramips: use netif_receive_skb instead of napi_gro_receive when rx csum offload is unavailable
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43810
Felix Fietkau [Fri, 2 Jan 2015 21:53:11 +0000 (21:53 +0000)]
kernel: add mtd split support for trx images
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43809
Felix Fietkau [Fri, 2 Jan 2015 21:53:02 +0000 (21:53 +0000)]
ramips: rework and fix m25p80 chunked-io support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43808
Felix Fietkau [Fri, 2 Jan 2015 21:52:53 +0000 (21:52 +0000)]
ramips: split mt7621 spi into a separate driver, increase maximum transfer size
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43807
Felix Fietkau [Fri, 2 Jan 2015 21:52:44 +0000 (21:52 +0000)]
kernel: add a mtdsplit implementation for tp-link firmware headers
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43806
Felix Fietkau [Fri, 2 Jan 2015 21:52:35 +0000 (21:52 +0000)]
kernel: move mtdsplit files to drivers/mtd/mtdsplit/ to simplify maintenance, unify patches across kernel versions
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43805
Imre Kaloz [Fri, 2 Jan 2015 16:48:20 +0000 (16:48 +0000)]
honor the bootloader's bootargs
Only overwrite the bootloader's bootargs if "chosen" exists in the dtb
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 43802
Imre Kaloz [Wed, 31 Dec 2014 21:59:07 +0000 (21:59 +0000)]
enable wpad-mini by default
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 43801
Rafał Miłecki [Tue, 30 Dec 2014 17:45:53 +0000 (17:45 +0000)]
bcm53xx: support flashing CHK and CyberTAN images
SVN-Revision: 43800
Rafał Miłecki [Tue, 30 Dec 2014 17:19:36 +0000 (17:19 +0000)]
brcm47xx: support for flashing CHK and CyberTAN images
This will allow simple sysupgrade-s including simpler reverting to the
original firmware.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43799
Rafał Miłecki [Tue, 30 Dec 2014 17:19:02 +0000 (17:19 +0000)]
brcm47xx: verify if CHK/CyberTAN contains valid TRX
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43798
Hauke Mehrtens [Mon, 29 Dec 2014 17:11:13 +0000 (17:11 +0000)]
mpc83xx: add support for kernel 3.14
This is compile tested only, please run test and report back.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 43797
Hauke Mehrtens [Mon, 29 Dec 2014 16:12:52 +0000 (16:12 +0000)]
mpc52xx: add support for kernel 3.14
This is compile tested only, please run test and report back.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 43796
Hauke Mehrtens [Mon, 29 Dec 2014 13:55:59 +0000 (13:55 +0000)]
ep93xx: add support for kernel 3.14
This is compile tested only, please run test and report back.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 43795
Hauke Mehrtens [Mon, 29 Dec 2014 11:59:32 +0000 (11:59 +0000)]
kernel: add some missing config options
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 43794
Felix Fietkau [Sun, 28 Dec 2014 21:55:21 +0000 (21:55 +0000)]
tools: build libtool after autoconf, not before (fixes #18659)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43793
Hauke Mehrtens [Sun, 28 Dec 2014 19:31:40 +0000 (19:31 +0000)]
ipq806x: refresh patches
This makes the patchs apply again.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 43792
Imre Kaloz [Sun, 28 Dec 2014 14:45:27 +0000 (14:45 +0000)]
upgrade to new rev, fixes possible compile error
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 43791
Felix Fietkau [Sat, 27 Dec 2014 13:37:32 +0000 (13:37 +0000)]
ath10k: fix tx rate selection for ad-hoc mode with HT
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43790
Felix Fietkau [Sat, 27 Dec 2014 13:03:26 +0000 (13:03 +0000)]
oxnas: re-enable ubifs
After the changes make ubinize.cfg optional in image.mk, ubifs
generation can now safely be enabled again.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43789
Felix Fietkau [Sat, 27 Dec 2014 13:03:19 +0000 (13:03 +0000)]
image.mk: make ubinize.cfg optional
When using UbinizeImage with ubifs rootfs, ubinize.cfg is no longer
needed. Yet, the absance of ubinize.cfg would make the build process
abort with an error.
Fix that by checking if ubinize.cfg is present and do no not call the
"classic" ubinize image generation if it isn't.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
[missing new-line before UbinizeImage added itentionally]
SVN-Revision: 43788
Felix Fietkau [Sat, 27 Dec 2014 13:03:12 +0000 (13:03 +0000)]
oxnas: clk-oxnas: rework pllb enable function
kernel lock debugging unveiled that we should not call
of_reset_control_get inside a clock's enable operation (see below)
move of_reset_control_* previously used in pllb_clk_enable to new
pllb_clk_prepare and pllb_clk_unprepare functions.
use a container to carry runtime information.
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:2742 lockdep_trace_alloc+0xb8/0xfc()
DEBUG_LOCKS_WARN_ON(irqs_disabled_flags(flags))
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.26 #6
[<
c001a6ac>] (unwind_backtrace) from [<
c0016dec>] (show_stack+0x10/0x14)
[<
c0016dec>] (show_stack) from [<
c0194f68>] (dump_stack+0x7c/0x94)
[<
c0194f68>] (dump_stack) from [<
c0021b50>] (warn_slowpath_common+0x68/0x8c)
[<
c0021b50>] (warn_slowpath_common) from [<
c0021ba4>] (warn_slowpath_fmt+0x30/0x40)
[<
c0021ba4>] (warn_slowpath_fmt) from [<
c0061b30>] (lockdep_trace_alloc+0xb8/0xfc)
[<
c0061b30>] (lockdep_trace_alloc) from [<
c00cb740>] (kmem_cache_alloc+0x1c/0xf8)
[<
c00cb740>] (kmem_cache_alloc) from [<
c01d33c8>] (of_reset_control_get+0xe8/0x12c)
[<
c01d33c8>] (of_reset_control_get) from [<
c0269228>] (pllb_clk_enable+0x14/0xbc)
[<
c0269228>] (pllb_clk_enable) from [<
c0265738>] (__clk_enable+0x54/0xa0)
[<
c0265738>] (__clk_enable) from [<
c0265acc>] (clk_enable+0x18/0x2c)
[<
c0265acc>] (clk_enable) from [<
c04325f8>] (oxnas_pcie_probe+0x3b8/0x6a0)
[<
c04325f8>] (oxnas_pcie_probe) from [<
c01f2510>] (platform_drv_probe+0x18/0x48)
[<
c01f2510>] (platform_drv_probe) from [<
c01f1070>] (driver_probe_device+0xd8/0x24c)
[<
c01f1070>] (driver_probe_device) from [<
c01f1298>] (__driver_attach+0x70/0x94)
[<
c01f1298>] (__driver_attach) from [<
c01ef728>] (bus_for_each_dev+0x4c/0x98)
[<
c01ef728>] (bus_for_each_dev) from [<
c01f0818>] (bus_add_driver+0xcc/0x1e8)
[<
c01f0818>] (bus_add_driver) from [<
c01f169c>] (driver_register+0xa0/0xe8)
[<
c01f169c>] (driver_register) from [<
c01f2568>] (platform_driver_probe+0x20/0xa4)
[<
c01f2568>] (platform_driver_probe) from [<
c0013a3c>] (do_one_initcall+0x90/0x140)
[<
c0013a3c>] (do_one_initcall) from [<
c0421d38>] (kernel_init_freeable+0x1e4/0x2c0)
[<
c0421d38>] (kernel_init_freeable) from [<
c000c214>] (kernel_init+0x8/0x104)
[<
c000c214>] (kernel_init) from [<
c0008768>] (ret_from_fork+0x14/0x2c)
---[ end trace
5f17ed2f61e0683f ]---
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43787
Felix Fietkau [Sat, 27 Dec 2014 13:02:58 +0000 (13:02 +0000)]
kernel/generic: fix warnings if libata-ledtrig is disabled
accidentally #if was used instead of #ifdef, thus gcc warned
about CONFIG_ATA_LEDS being undefined...
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43786
Felix Fietkau [Sat, 27 Dec 2014 13:00:09 +0000 (13:00 +0000)]
binutils: run install twice instead of overwriting the final toolchain with the initial one
fixes compiler error after a binutils rebuild/reinstall without
rebuilding the rest of the toolchain
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43785
Felix Fietkau [Sat, 27 Dec 2014 12:59:59 +0000 (12:59 +0000)]
build: use gcc-provided ar, nm and ranlib where appropriate
Since GCC 4.7, GCC provides its own wrappers around ar, nm and ranlib, which
should be used for builds with link-time optimization. Since GCC 4.9, using them
actually necessary for LTO builds using convenience libraries to succeed.
There are some packages which try to automatically detect if gcc-{ar,nm,ranlib}
exist (one example is my package "fastd" in the package repository, which tries
to use LTO). This breaks because the OpenWrt build system explicitly sets the
binutils versions of these tools.
As it doesn't cause any issues to use gcc-{ar,nm,ranlib} instead of
{ar,nm,ranlib} even without LTO, this patch just makes OpenWrt use the
GCC-provided versions by default, which fixes the build of such packages with
GCC 4.9.
(I know that builds fail though when clang is used with -flto and
gcc-{ar,nm,ranlib}, but as all OpenWrt toolchains are based on GCC, this isn't
a real issue.)
Completely cleaning the tree (or at least `make clean toolchain/clean`) is
necessary to get a consistent state after the binutils plugins support patch and
this one (as trying to use gcc-{ar,nm,ranlib} with a binutils built without
plugin support will definitely lead to a build failure).
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 43784
Felix Fietkau [Sat, 27 Dec 2014 12:59:53 +0000 (12:59 +0000)]
binutils: enable plugin support
--enable-plugin is necessary for gcc-ar, gcc-nm and gcc-ranlib to work, which
must be used with GCC 4.9 for LTO to work.
Without this option, gcc-ar etc. will just fail with
sorry - this program has been built without plugin support
Using the normal ar from binutils with GCC 4.9 and -flto will cause linking
with static "convenience" libraries to fail.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 43783
Felix Fietkau [Sat, 27 Dec 2014 12:59:47 +0000 (12:59 +0000)]
hostapd: add support for configuring supported rates
patch by Wilco Baan Hofman from #18627
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43782
Imre Kaloz [Fri, 26 Dec 2014 14:48:33 +0000 (14:48 +0000)]
fix mvneta vlan tagging
This is a 3.14.x backport of:
"mvneta: Fix TSO and checksum for non-acceleration vlan traffic"
Upstream commits:
817dbfa5d1bc276a72c1a577310382008e8aca0a
2d39d120781a5770573dc6ed672a5a562f541aea
Fixes vlan tagging on SoC interfaces for the WRT1900AC. Useful
when using mvsw6171 driver.
Signed-off-by: Mark Milburn <mark.a.milburn@gmail.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 43781
Imre Kaloz [Fri, 26 Dec 2014 14:31:45 +0000 (14:31 +0000)]
don't copy initramfs.elf unconditionally
targets that need it should do it in their image Makefile
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 43780
Imre Kaloz [Fri, 26 Dec 2014 13:45:18 +0000 (13:45 +0000)]
only call UbinizeImage and BuildSysUpgrade for boards we support them on
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 43779
projects / openwrt / staging / stintel.git / log