IB/srpt: One target per port

In multipathing setups where a target system is equipped with
dual-port HCAs it is useful to have one connection per target port
instead of one connection per target HCA. Hence move the connection
list (rch_list) from struct srpt_device into struct srpt_port.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/srpt: Add P_Key support

Process connection requests that use another P_Key than the default
correctly.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/srpt: Rework srpt_disconnect_ch_sync()

This patch fixes a use-after-free issue for ch->release_done when
running the SRP protocol on top of the rdma_rxe driver.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/srpt: Make it safe to use RCU for srpt_device.rch_list

The next patch will iterate over rch_list from a context from which
it is not allowed to block. Hence make rch_list RCU-safe.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/srp: Refactor srp_send_req()

This patch does not change any functionality but prepares for the patch
that adds RDMA_CM support by making the RDMA_CM patch much easier to
read.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/srp: Improve path record query error message

Show all path record query parameters if a path record query fails.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/srp: Use kstrtoull() instead of simple_strtoull()

Use kstrtoull() since simple_strtoull() is deprecated. This patch
improves error checking but otherwise does not change any functionality.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/hns: Remove unnecessary platform_get_resource() error check

devm_ioremap_resource() already checks if the resource is NULL, so
remove the unnecessary platform_get_resource() error check.

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/mlx5: Mmap the HCA's clock info to user-space

This patch maps the new page to user space applications to
allow converting a user space completion timestamp to system wall
time at the lowest possible latency cost.
By using a versioning scheme we allow compatibility between current
and future userspace libraries.
The change moves mlx5_ib_mmap_cmd enum from mlx5_ib.h to the
abi header file mlx5-abi.h.

Reviewed-by: Alex Vesker <valex@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Eitan Rabin <rabin@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

net/mlx5e: Add clock info page to mlx5 core devices

Adds a new page to mlx5 core containing clock info data that allows
user level applications to translate between cqe timestamp to
nanoseconds. The information stored into this page is represented
through mlx5_ib_clock_info.

In order to synchronize between kernel and user space a sequence
number is incremented at the beginning and end of each update.
An odd number means the data is being updated while an even means
the access was already done. To guarantee that the data structure
was accessed atomically user will:

repeat:
        seq1 = <read sequence>
        goto <repeate> while odd
        <read data structure>
        seq2 = <read sequence>
        if seq1 != seq2 goto repeat

Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Eitan Rabin <rabin@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/cq: Don't force IB_POLL_DIRECT poll context for ib_process_cq_direct

polling the completion queue directly does not interfere
with the existing polling logic, hence drop the requirement.
Be aware that running ib_process_cq_direct with non IB_POLL_DIRECT
CQ may trigger concurrent CQ processing.

This can be used for polling mode ULPs.

Cc: Bart Van Assche <bart.vanassche@wdc.com>
Reported-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
[maxg: added wcs array argument to __ib_process_cq]
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/core: postpone WR initialization during queue drain

No need to initialize completion and WR in case we fail
during QP modification.

Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/rxe: Fix rxe_qp_cleanup()

rxe_qp_cleanup() can sleep so it must be run in thread context and
not in atomic context. This patch avoids that the following bug is
triggered:

Kernel BUG at 00000000560033f3 [verbose debug info unavailable]
BUG: sleeping function called from invalid context at net/core/sock.c:2761
in_atomic(): 1, irqs_disabled(): 0, pid: 7, name: ksoftirqd/0
INFO: lockdep is turned off.
Preemption disabled at:
[<00000000b6e69628>] __do_softirq+0x4e/0x540
CPU: 0 PID: 7 Comm: ksoftirqd/0 Not tainted 4.15.0-rc7-dbg+ #4
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
Call Trace:
 dump_stack+0x85/0xbf
 ___might_sleep+0x177/0x260
 lock_sock_nested+0x1d/0x90
 inet_shutdown+0x2e/0xd0
 rxe_qp_cleanup+0x107/0x140 [rdma_rxe]
 rxe_elem_release+0x18/0x80 [rdma_rxe]
 rxe_requester+0x1cf/0x11b0 [rdma_rxe]
 rxe_do_task+0x78/0xf0 [rdma_rxe]
 tasklet_action+0x99/0x270
 __do_softirq+0xc0/0x540
 run_ksoftirqd+0x1c/0x70
 smpboot_thread_fn+0x1be/0x270
 kthread+0x117/0x130
 ret_from_fork+0x24/0x30

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Moni Shoua <monis@mellanox.com>
Cc: stable@vger.kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/rxe: Fix a race condition in rxe_requester()

The rxe driver works as follows:
* The send queue, receive queue and completion queues are implemented as
  circular buffers.
* ib_post_send() and ib_post_recv() calls are serialized through a spinlock.
* Removing elements from various queues happens from tasklet
  context. Tasklets are guaranteed to run on at most one CPU. This serializes
  access to these queues. See also rxe_completer(), rxe_requester() and
  rxe_responder().
* rxe_completer() processes the skbs queued onto qp->resp_pkts.
* rxe_requester() handles the send queue (qp->sq.queue).
* rxe_responder() processes the skbs queued onto qp->req_pkts.

Since rxe_drain_req_pkts() processes qp->req_pkts, calling
rxe_drain_req_pkts() from rxe_requester() is racy. Hence this patch.

Reported-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: stable@vger.kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/bnxt_re: Add SRQ support for Broadcom adapters

Shared receive queue (SRQ) is defined as a pool of
receive buffers shared among multiple QPs which belong
to same protection domain in a given process context.
Use of SRQ reduces the memory foot print of IB applications.

Broadcom adapters support SRQ, adding code-changes to enable
shared receive queue.

Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/bnxt_re: expose detailed stats retrieved from HW

Broadcom's adapter supports more granular statistics
to allow better understanding about the state of the
chip when data traffic is flowing.

Exposing the detailed stats to the consumer through
the standard hook available in the kverbs interface.
In order to retrieve all the information, driver
implements a firmware command.

Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/bnxt_re: Add support for MRs with Huge pages

Depending on the OS page-table configurations, applications
may request MRs which has page size alignment other than 4K

Underlying provider driver needs to adjust its PBL boundaries
according to the incoming page boundaries in the PA list.

Adding a capability to register MRs having pages-sizes other
than 4K (Hugepages).

Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/bnxt_re: Add support for query firmware version

The device now reports firmware version thus, removing
the hard coded values of the FW version string and
redundant fw_rev hook from sysfs. Adding code to query
firmware version from underlying device and report it
through the kernel verb to get firmware version string.

Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/bnxt_re: Enable RoCE on virtual functions

RoCE can be used by virtual functions (VFs) as well. Adding
code changes to allow resource reservation, initialization
and avail the resources to the RDMA applications running on
those VFs.

Currently, fifty percent of the total available resources
are reserved for PF and remaining are equally divided among
active VFs.

Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

i40iw: Free IEQ resources

The iWARP Exception Queue (IEQ) resources are not freed when a QP is
destroyed. Fix this by freeing IEQ resources when freeing QP resources.

Fixes: d37498417947 ("i40iw: add files for iwarp interface")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

i40iw: Remove setting of rem_addr.len

Remove setting of rem_addr.len before calling iw_rdma_write,
iw_inline_rdma_write and rdma_read. rem_addr.len is not used in those
functions.

Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

i40iw: Remove limit on re-posting AEQ entries to HW

Currently, if the number of processed Asynchronous Event Queue (AEQ)
entries exceeds 255, they are not returned to HW for re-use. During
scale-up, the unreturned AEQ entries can grow to the max AEQ size and
cause the HW to report an AEQ overflow.

Remove the check which limits the number of processed AEQ entries returned
to HW.

Fixes: 86dbcd0f12e9 ("RDMA/i40iw: add file to handle cqp calls")
Signed-off-by: Sindhu Devale <sindhu.devale@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

i40iw: Zero-out consumer key on allocate stag for FMR

If the application invalidates the MR before the FMR WR, HW parses the
consumer key portion of the stag and returns an invalid stag key
Asynchronous Event (AE) that tears down the QP.

Fix this by zeroing-out the consumer key portion of the allocated stag
returned to application for FMR.

Fixes: ee855d3b93f3 ("RDMA/i40iw: Add base memory management extensions")
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

i40iw: Remove extra call to i40iw_est_sd()

Remove redundant estimate SD function call.  sd_needed should already be
updated at the end of the do while resource reduction loop.

Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Set the guid for hip08 RoCE device

This patch assign a guid(Global Unique identifer) value to the hip08
device.

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Update the verbs of polling for completion

If the port is a RoCEv2 port, the remote port address and QP information
which returned for UD will be modified.

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Assign zero for pkey_index of wc in hip08

Because pkey is fixed for hip08 RoCE, it needs to assign zero for
pkey_index of wc. otherwise, it will happen an error when establishing
connection by communication management mechanism.

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Fill sq wqe context of ud type in hip08

This patch mainly configure the fields of sq wqe of ud type when posting
wr of gsi qp type.

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Add gsi qp support for modifying qp in hip08

It needs to Assign the values for some fields in qp context when qp type
is gsi qp type in hip08.

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Create gsi qp in hip08

The gsi qp and rc qp use the same qp context structure and the created
flow, only differentiate them by qpn and qp type.

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Assign the correct value for tx_cqn

When modifying qp from init to init, it need to assign the cqn of send cq
for tx cqn field of qp context. Otherwise, it will cause a mistake when
the send and recv cq sizes are different.

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/cma: use strlcpy() instead of strncpy()

gcc-8 reports

drivers/infiniband/core/cma_configfs.c: In function 'make_cma_dev':
./include/linux/string.h:245:9: warning: '__builtin_strncpy' specified
bound 64 equals destination size [-Wstringop-truncation]

We need to use strlcpy() to make sure the string is nul-terminated.

Signed-off-by: Xiongfeng Wang <xiongfeng.wang@linaro.org>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/core: Clarify rdma_ah_find_type

iWARP does not use rdma_ah_attr_type, and for this reason we do not have a
RDMA_AH_ATTR_TYPE_IWARP. rdma_ah_find_type should not even be called on iwarp
ports and for clarity it shouldn't have a special test for iWarp.

This changes the result from RDMA_AH_ATTR_TYPE_ROCE to RDMA_AH_ATTR_TYPE_IB
when wrongly called on an iWarp port.

Fixes: 44c58487d51a ("IB/core: Define 'ib' and 'roce' rdma_ah_attr types")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/core: Fix ib_wc structure size to remain in 64 bytes boundary

The change of slid from u16 to u32 results in sizeof(struct ib_wc)
cross 64B boundary, which causes more cache misses. This patch
rearranges the fields and remain the size to 64B.

Pahole output before this change:

struct ib_wc {
        union {
                u64                wr_id;                /*           8 */
                struct ib_cqe *    wr_cqe;               /*           8 */
        };                                               /*     0     8 */
        enum ib_wc_status          status;               /*     8     4 */
        enum ib_wc_opcode          opcode;               /*    12     4 */
        u32                        vendor_err;           /*    16     4 */
        u32                        byte_len;             /*    20     4 */
        struct ib_qp *             qp;                   /*    24     8 */
        union {
                __be32             imm_data;             /*           4 */
                u32                invalidate_rkey;      /*           4 */
        } ex;                                            /*    32     4 */
        u32                        src_qp;               /*    36     4 */
        int                        wc_flags;             /*    40     4 */
        u16                        pkey_index;           /*    44     2 */

        /* XXX 2 bytes hole, try to pack */

        u32                        slid;                 /*    48     4 */
        u8                         sl;                   /*    52     1 */
        u8                         dlid_path_bits;       /*    53     1 */
        u8                         port_num;             /*    54     1 */
        u8                         smac[6];              /*    55     6 */

        /* XXX 1 byte hole, try to pack */

        u16                        vlan_id;              /*    62     2 */
        /* --- cacheline 1 boundary (64 bytes) --- */
        u8                         network_hdr_type;     /*    64     1 */

        /* size: 72, cachelines: 2, members: 17 */
        /* sum members: 62, holes: 2, sum holes: 3 */
        /* padding: 7 */
        /* last cacheline: 8 bytes */
};

Pahole output after this change:

struct ib_wc {
        union {
                u64                wr_id;                /*           8 */
                struct ib_cqe *    wr_cqe;               /*           8 */
        };                                               /*     0     8 */
        enum ib_wc_status          status;               /*     8     4 */
        enum ib_wc_opcode          opcode;               /*    12     4 */
        u32                        vendor_err;           /*    16     4 */
        u32                        byte_len;             /*    20     4 */
        struct ib_qp *             qp;                   /*    24     8 */
        union {
                __be32             imm_data;             /*           4 */
                u32                invalidate_rkey;      /*           4 */
        } ex;                                            /*    32     4 */
        u32                        src_qp;               /*    36     4 */
        u32                        slid;                 /*    40     4 */
        int                        wc_flags;             /*    44     4 */
        u16                        pkey_index;           /*    48     2 */
        u8                         sl;                   /*    50     1 */
        u8                         dlid_path_bits;       /*    51     1 */
        u8                         port_num;             /*    52     1 */
        u8                         smac[6];              /*    53     6 */

        /* XXX 1 byte hole, try to pack */

        u16                        vlan_id;              /*    60     2 */
        u8                         network_hdr_type;     /*    62     1 */

        /* size: 64, cachelines: 1, members: 17 */
        /* sum members: 62, holes: 1, sum holes: 1 */
        /* padding: 1 */
};

Cc: <stable@vger.kernel.org> # v4.13
Fixes: 7db20ecd1d97 ("IB/core: Change wc.slid from 16 to 32 bits")
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx4: Fix incorrectly releasing steerable UD QPs when have only ETH ports

Allocating steerable UD QPs depends on having at least one IB port,
while releasing those QPs does not.

As a result, when there are only ETH ports, the IB (RoCE) driver
requests releasing a qp range whose base qp is zero, with
qp count zero.

When SR-IOV is enabled, and the VF driver is running on a VM over
a hypervisor which treats such qp release calls as errors
(rather than NOPs), we see lines in the VM message log like:

 mlx4_core 0002:00:02.0: Failed to release qp range base:0 cnt:0

Fix this by adding a check for a zero count in mlx4_release_qp_range()
(which thus treats releasing 0 qps as a nop), and eliminating the
check for device managed flow steering when releasing steerable UD QPs.
(Freeing ib_uc_qpns_bitmap unconditionally is also OK, since it
remains NULL when steerable UD QPs are not allocated).

Cc: <stable@vger.kernel.org>
Fixes: 4196670be786 ("IB/mlx4: Don't allocate range of steerable UD QPs for Ethernet-only device")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/qedr: Fix endian problems around imm_data

The double swap matches what user space rdma-core does to imm_data.

wc->imm_data is not used in the kernel so this change has no practical
impact.

Acked-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Fix endian problems around imm_data and rkey

This matches the changes made recently to the userspace hns
driver when it was made sparse clean.

See rdma-core commit bffd380cfe56 ("libhns: Make the provider sparse
clean")

wc->imm_data is not used in the kernel so this change has no practical
impact.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA: Mark imm_data as be32 in the verbs uapi header

This matches what the userspace copy of this header has been doing
for a while. imm_data is an opaque 4 byte array carried over the network,
and invalidate_rkey is in CPU byte order.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/core: Limit DMAC resolution to RoCE Connected QPs

Resolving DMAC for RoCE is applicable to only Connected mode QPs.
So resolve DMAC for only for Connected mode QPs.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/core: Attempt DMAC resolution for only RoCE

Instead of returning 0 (success) for RoCE scenarios where DMAC should
not be resolved, avoid such attempt and make code consistent with
ib_create_user_ah().

Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/core: Limit DMAC resolution to userspace QPs

Currently ah_attr is initialized by the ib_cm layer for rdma_cm
based applications. For RoCE transport ah_attr.roce.dmac is already
initialized by ib_cm, rdma_cm either from wc, path record, route
resolve, explicit path record setting depending on active or passive
side QP. Therefore avoid resolving DMAC for QP of kernel consumers.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/core: Perform modify QP on real one

Currently qp->port stores the port number whenever IB_QP_PORT
QP attribute mask is set (during QP state transition to INIT state).
This port number should be stored for the real QP when XRC target QP
is used.

Follow the ib_modify_qp() implementation and hide the access to ->real_qp.

Fixes: a512c2fbef9c ("IB/core: Introduce modify QP operation with udata")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

infiniband: fix sw/rdmavt/* kernel-doc notation

Use correct parameter names and formatting in function kernel-doc notation
to eliminate warnings from scripts/kernel-doc.

../drivers/infiniband/sw/rdmavt/mr.c:784: warning: Excess function parameter 'ibmfr' description in 'rvt_map_phys_fmr'
../drivers/infiniband/sw/rdmavt/vt.c:234: warning: Excess function parameter 'intex' description in 'rvt_query_pkey'
../drivers/infiniband/sw/rdmavt/vt.c:266: warning: Excess function parameter 'index' description in 'rvt_query_gid'
../drivers/infiniband/sw/rdmavt/vt.c:306: warning: Excess function parameter 'data' description in 'rvt_alloc_ucontext'
../drivers/infiniband/sw/rdmavt/cq.c:65: warning: Excess function parameter 'sig' description in 'rvt_cq_enter'
../drivers/infiniband/sw/rdmavt/qp.c:279: warning: Excess function parameter 'qpt' description in 'rvt_free_all_qps'
../drivers/infiniband/sw/rdmavt/mcast.c:282: warning: Excess function parameter 'igd' description in 'rvt_attach_mcast'
../drivers/infiniband/sw/rdmavt/mcast.c:345: warning: Excess function parameter 'igd' description in 'rvt_detach_mcast'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: linux-doc@vger.kernel.org
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

infiniband: fix ulp/opa_vnic/opa_vnic_vema.c kernel-doc notation

Use correct parameter name and description in kernel-doc notation to
eliminate a kernel-doc warning.

../drivers/infiniband/ulp/opa_vnic/opa_vnic_vema.c:730: warning: Excess function parameter 'cport' description in 'opa_vnic_vema_send_trap'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: linux-doc@vger.kernel.org
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

infiniband: fix core/fmr_pool.c kernel-doc notation

Fix kernel-doc warning for ib_fmr_pool_map_phys() and also format it
with function description and text spacing.

../drivers/infiniband/core/fmr_pool.c:404: warning: Excess function parameter 'pool' description in 'ib_fmr_pool_map_phys'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

infiniband: fix core/verbs.c kernel-doc notation

Change function parameter name in kernel-doc notation and other comments
to eliminate a kernel-doc warning.

../drivers/infiniband/core/verbs.c:1790: warning: Excess function parameter 'wq_init_attr' description in 'ib_create_wq'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/cma: Fix rdma_cm path querying for RoCE

The 'if' logic in ucma_query_path was broken with OPA was introduced
and started to treat RoCE paths as as OPA paths. Invert the logic
of the 'if' so only OPA paths are treated as OPA paths.

Otherwise the path records returned to rdma_cma users are mangled
when in RoCE mode.

Fixes: 57520751445b ("IB/SA: Add OPA path record type")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/cma: Fix rdma_cm raw IB path setting for RoCE

rdma_set_ib_path() missed setting path record fields for RoCE
transport when RoCE support was added.

This results in setting incorrect ndev, destination mac address,
incorrect GID type etc errors when user space attempts to set a raw
IB path using the roce IB path compatibility mapping from userspace.

Fixes: 3c86aa70bf67 ("RDMA/cm: Add RDMA CM support for IBoE devices")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/{cma, ucma}: Simplify and rename rdma_set_ib_paths

Since 2006 there has been no user of rdmacm based application to make use
of setting multiple path records using rdma_set_ib_paths API.

Therefore code is simplified to allow setting one path record entry.
Now that it sets only single path, it is renamed to reflect the same.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/cma: Provide a function to set RoCE path record L2 parameters

Introduce a helper function to set path record L2 fields for RoCE.
This includes setting GID type, destination mac address and netdev
ifindex.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/cma: Use the right net namespace for the rdma_cm_id

The net namespace is set in addr during create_rdma_id(),
cma_resolve_iboe_route() should use that instead of the
init namespace.

The original code was added in commit fa20105e09e9 ("IB/cma: Add support
for network namespaces"), but this path wasn't in use back then.

This patch updates the code to use right namespace, as preparation
for improving namespace support.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/core: Increase number of char device minors

There is a need to increase number of possible char devices to support
large number of SR-IOV instances. The current limit is in the range of
64-128 devices/ports. Increase it to support up to 1024.

The patch performs the following steps to refactor the code:
1. Removes the split bitmap for fixed and overflow dev numbers.
2. Pre-allocates the non-legacy major number range during driver
   initialization, choosen for simplicity.
3. Add new define (RDMA_MAX_PORTS) that is shared between all drivers.
   This is the maximum total number of ports on all struct ib_devices.
4. Set RDMA_MAX_PORTS to 1024.

Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/core: Remove the locking for character device bitmaps

Remove the locks that protect character device bitmaps of
uverbs, umad and issm.

The character device bitmaps are accessed in "client->add" and
"client->remove" calls from ib_register_device and ib_unregister_device
respectively. These calls are already protected by the "device_mutex"
mutex. Thus, the spinlocks are not needed.

Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/rxe: Fix a race condition related to the QP error state

The following sequence:
* Change queue pair state into IB_QPS_ERR.
* Post a work request on the queue pair.

Triggers the following race condition in the rdma_rxe driver:
* rxe_qp_error() triggers an asynchronous call of rxe_completer(), the function
  that examines the QP send queue.
* rxe_post_send() posts a work request on the QP send queue.

If rxe_completer() runs prior to rxe_post_send(), it will drain the send
queue and the driver will assume no further action is necessary.
However, once we post the send to the send queue, because the queue is
in error, no send completion will ever happen and the send will get
stuck.  In order to process the send, we need to make sure that
rxe_completer() gets run after a send is posted to a queue pair in an
error state.  This patch ensures that happens.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Moni Shoua <monis@mellanox.com>
Cc: <stable@vger.kernel.org> # v4.8
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/mlx5: remove redundant assignment of mdev

The initial assignment to mdev is redundant as mdev is re-assigned
later and the first assigned value is never read. Remove this
redundant assignment.

Cleans up clang warning:
drivers/infiniband/hw/mlx5/main.c:359:24: warning: Value stored
to 'mdev' during its initialization is never read

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/rxe: remove unnecessary skb_clone in xmit

In xmit, there is a skb_clone. This function copies the struct sk_buff.
And some parameters are changed to the new skb. Then the new skb is sent
while the old skb is freed.

While the function skb_clone is removed, the parameter changes are made on
the old skb, then the old skb is sent. It can also work well.

The following tests are made.

 server                       client
---------                    ---------
|1.1.1.1|<----rxe-channel--->|1.1.1.2|
---------                    ---------

On server: rping -s -a 1.1.1.1 -v -C 1000 -S 512
On client: rping -c -a 1.1.1.1 -v -C 1000 -S 512

The kernel config CONFIG_DEBUG_KMEMLEAK is enabled on both server
and client.

This test runs for several hours. There is no memory leak and the whole
system can work well.

As the above network, the following tests are made.

Server: ibv_rc_pingpong -d rxe0 -g 1
Client: ibv_rc_pingpong -d rxe0 -g 1 1.1.1.1

The result on Server.
Before:
8192000 bytes in 0.88 seconds = 74.36 Mbit/sec
1000 iters in 0.88 seconds = 881.30 usec/iter

After:
8192000 bytes in 0.81 seconds = 81.15 Mbit/sec
1000 iters in 0.81 seconds = 807.62 usec/iter

The throughput is enhanced and the latency is reduced.

CC: Srinivas Eeda <srinivas.eeda@oracle.com>
CC: Joe Jin <joe.jin@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/rxe: add the static type to the variable

The variable recv_sockets is only used in the file rxe_net.c. So
it is better to add static type to it.

CC: Srinivas Eeda <srinivas.eeda@oracle.com>
CC: Joe Jin <joe.jin@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Merge branch 'bart-srpt-for-next' into k.o/wip/dl-for-next

Merging in 12 patch series from Bart that required changes in the
current for-rc branch in order to apply cleanly.

Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/srpt: Micro-optimize I/O context state manipulation

Since all I/O context state changes are already serialized, it is
not necessary to protect I/O context state changes with the I/O
context spinlock. Hence remove that spinlock.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/srpt: Inline srpt_get_cmd_state()

It is not necessary to obtain ioctx->spinlock when reading the ioctx
state. Since after removal of this locking only a single line remains,
inline the srpt_get_cmd_state() function.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/srpt: Introduce srpt_format_guid()

Introduce a function for converting a GUID into an ASCII string. This
patch does not change any functionality.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/srpt: Reduce frequency of receive failure messages

Disabling an SRP target port causes the state of all QPs associated
with a port to be changed into IB_QPS_ERR. Avoid that this causes
one error message per I/O context to be reported.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/srpt: Convert a warning into a debug message

At least when running the ib_srpt driver on top of the rdma_rxe
driver it is easy to trigger a zero-length write completion in
the CH_DISCONNECTED state. Hence make the message that reports
this less noisy.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/srpt: Use the IPv6 format for GIDs in log messages

Make the ib_srpt driver use the IPv6 format for GIDs in log messages
to improve consistency of this driver with other RDMA kernel drivers.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/srpt: Verify port numbers in srpt_event_handler()

Verify whether port numbers are in the expected range before using
these as an array index. Complain if a port number is out of range.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/srpt: Reduce the severity level of a log message

Since the SRQ event message is only useful for debugging purposes,
reduce its severity from "informational" to "debug".

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/srpt: Rename a local variable, a member variable and a constant

Rename rsp_size into max_rsp_size and SRPT_RQ_SIZE into MAX_SRPT_RQ_SIZE.
The new names better reflect the role of this member variable and constant.
Since the prefix "srp_" is superfluous in the context of the function
that creates an RDMA channel, rename srp_sq_size into sq_size.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/srpt: Document all structure members in ib_srpt.h

This patch avoids that the following command reports any warnings:

scripts/kernel-doc -none drivers/infiniband/ulp/srpt/ib_srpt.h

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/srpt: Fix kernel-doc warnings in ib_srpt.c

Avoid that warnings about missing parameter descriptions are reported
when building with W=1.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/srpt: Remove an unused structure member

Fixes: commit a42d985bd5b2 ("ib_srpt: Initial SRP Target merge for v3.3-rc1")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

net/mlx5: Set num_vhca_ports capability

Set the current capability to the max capability. Doing so enables dual
port RoCE functionality if supported by the firmware.

Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx5: Don't advertise RAW QP support in dual port mode

When operating in dual port RoCE mode FW doesn't support steering for
raw QPs on the slave port. They still work on the master port, but
the user has no way of knowing which port is the master. The
capability is reported per device, not per port.

Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx5: Route MADs for dual port RoCE

Route performance query MADs to the correct mlx5_core_dev when using
dual port RoCE mode.

Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

{net, IB}/mlx5: Change set_roce_gid to take a port number

When in dual port mode setting a RoCE GID for any port flows through the
master ports mlx5_core_dev. Provide an interface to set the port when
sending this command.

Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx5: Update counter implementation for dual port RoCE

Update the counter interface for multiple ports. Some counter sets
always comes from the primary device.

Port specific counters should be accessed per mlx5_core_dev not always
through the IB master mdev.

Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx5: Change debugfs to have per port contents

When there are multiple ports for single IB(RoCE) device, support
debugfs entries to be available for each port.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx5: Implement dual port functionality in query routines

Port operations must be routed to their native mlx5_core_dev. A
multiport RoCE device registers itself as having 2 ports even before a
2nd port is affiliated. If an unaffilated port is queried use capability
information from the master port, these values are the same.

Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx5: Move IB event processing onto a workqueue

Because mlx5_ib_event can be called from atomic context move event
handling onto a workqueue. A mutex lock is required to get the IB device
for slave ports, so move event processing onto a work queue. When an IB
event is received, check if the mlx5_core_dev  is a slave port, if so
attempt to get the IB device it's affiliated with. If found process the
event for that device, otherwise return.

Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

{net, IB}/mlx5: Manage port association for multiport RoCE

When mlx5_ib_add is called determine if the mlx5 core device being
added is capable of dual port RoCE operation. If it is, determine
whether it is a master device or a slave device using the
num_vhca_ports and affiliate_nic_vport_criteria capabilities.

If the device is a slave, attempt to find a master device to affiliate it
with. Devices that can be affiliated will share a system image guid. If
none are found place it on a list of unaffiliated ports. If a master is
found bind the port to it by configuring the port affiliation in the NIC
vport context.

Similarly when mlx5_ib_remove is called determine the port type. If it's
a slave port, unaffiliate it from the master device, otherwise just
remove it from the unaffiliated port list.

The IB device is registered as a multiport device, even if a 2nd port is
not available for affiliation. When the 2nd port is affiliated later the
GID cache must be refreshed in order to get the default GIDs for the 2nd
port in the cache. Export roce_rescan_device to provide a mechanism to
refresh the cache after a new port is bound.

In a multiport configuration all IB object (QP, MR, PD, etc) related
commands should flow through the master mlx5_core_dev, other commands
must be sent to the slave port mlx5_core_mdev, an interface is provide
to get the correct mdev for non IB object commands.

Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx5: Make netdev notifications multiport capable

When multiple RoCE ports are supported registration for events on
multiple netdevs is required. Refactor the event registration and
handling to support multiple ports.

Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx5: Reduce the use of num_port capability

Remove use of the num_ports general capability throughout. The number of
ports will be variable in the future, and reported in a different way.

Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/core: Change roce_rescan_device to return void

It always returns 0. Change return type to void.

Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

net/mlx5: Set software owner ID during init HCA

Generate a unique 128bit identifier for each host and pass that value to
firmware in the INIT_HCA command if it reports the sw_owner_id
capability. Each device bound to the mlx5_core driver will have the same
software owner ID.

In subsequent patches mlx5_core devices will be bound via a new VPort
command so that they can operate together under a single InfiniBand
device. Only devices that have the same software owner ID can be bound,
to prevent traffic intended for one host arriving at another.

The INIT_HCA command length was expanded by 128 bits. The command
length is provided as an input FW commands. Older FW does not have a
problem receiving this command in the new longer form.

Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

net/mlx5: Fix race for multiple RoCE enable

There are two potential problems with the existing implementation.

1. Enable and disable can race after the atomic operations.
2. If a command fails the refcount is left in an inconsistent state.

Introduce a lock and perform error checking.

Fixes: a6f7d2aff623 ("net/mlx5: Add support for multiple RoCE enable")
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx5: Add support for DC target QP

A DC Target (DCT) QP is represented in the hardware as a unique object.
This object is created by CREATE_DCT command and destroyed by DESTROY_DCT
command. However, in the driver we describe it as a QP.

The hardware command that creates a DCT needs parameters that the verb
create_qp() does not provide. Those remaining parameters are provided
with the call to the verb modify_qp(). Therefore we delay the actual
creation of a DCT in the hardware until the stage of modify_qp() to RTR.

A support for query_qp() was added as well. It uses QUERY_DCT command to
retrieve the applicable fields.

Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx5: Add support for DC Initiator QP

DC Initiator (DCI) QP is represented like any other QP in the hardware.
However, like any other transport QP there are attributes and settings
that are special to DCI QP and needs specific attention and care.
Make necessary changes to configure DCI QP.

Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx5: Handle type IB_QPT_DRIVER when creating a QP

The QP type IB_QPT_DRIVER doesn't describe the transport or the service
that the QP provides but those are known only to the hardware driver.
The actual type of the QP is stored in the hardware driver context (i.e.
mlx5_qp) under the field qp_sub_type.

Take the real QP type and any extra data that is required to create the QP
from the driver channel and modify the QP initial attributes before continuing
with create_qp().

Downstream patches from this series will add support for both DCI and
DCT driver QPs.

Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/core: Introduce driver QP type

Vendors can implement type of QPs that are not described in the
InfiniBand specification. To still be able to use the IB/core layer
services (e.g. user object management) without tainting this layer with
driver proprietary logic, a new QP type is added - IB_QPT_DRIVER. This
will be a general QP type that the core layer doesn't know about its true nature.
When a command like create_qp() is passed to a hardware driver the extra
data that is required is taken from the driver channel.
Downstream patches from this series will use that QP type in the mlx5
driver.

Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

net/mlx5: Enable DC transport

Enable DC transport in the firmware to provide its functionality.

Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

net/mlx5: Add DCT command interface

Add a missing command interface to work with a DCT. It includes: creating,
destroying and get events for.

Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

bnxt_re: report RoCE device support at info level

Reporting that a device doesn't support RoCE seems like a valuable piece
of information to have when trying to determine why a driver is not binding
to a device. Better to report this at info log level instead of requiring
a user to enable all debug messages in the driver.

Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
Acked-By: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/core: Add encode/decode FDR/EDR rates

The cases for FDR/EDR signalling speed, were missing in
ib_rate_to_mult and mult_to_ib_rate giving wrong return values when
drivers convert static rate to/from inter-packet-delay.

Signed-off-by: Hans Westgaard Ry <hans.westgaard.ry@oracle.com>
Reviewed-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

i40iw: Replace mdelay with msleep in i40iw_wait_pe_ready

i40iw_wait_pe_ready is not called in an interrupt handler
nor holding a spinlock.
The function mdelay in it can be replaced with msleep,
to reduce busy wait.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/rdmavt: Add trace for RNRNAK timer

This patch adds static trace for RNRNAK timer. Currently the output from
hrtimer static trace only shows the addresses of hrtimers in the system
and there is no easy way to correlate an RNRNAK timer with its entries in
the hrtimer trace. This patch adds the correlation among a QP, its RNRNAK
timer, and its entries in the hrtimer trace. This correlation will be
enormously helpful when debugging RNRNAK related issues. In addition, this
patch cleans up rvt_stop_rnr_timer() to be void while here.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/{hfi1, qib}: Fix a concurrency issue with device name in logging

The get_unit_name() function crafts a string based on the device name
and the device unit number.  It then stores this in a static variable.

This has concurrency issues as can be seen with this log:

hfi1 0000:02:00.0: hfi1_1: read_idle_message: read idle message 0x203
hfi1 0000:01:00.0: hfi1_1: read_idle_message: read idle message 0x203

The PCI device ID (0000:02:00.0 vs. 0000:01:00.0) is correct for the
message, but the device string hfi1_1 is incorrect (it should be
hfi1_0 for the second log message).

Remove get_unit_name() function.

Instead, use the rvt accessor rvt_get_ibdev_name() to get the IB name
string.

Clean up any hfi1_early_xx calls that can now use the new path.

QIB has the same (qib_get_unit_name()) issue.  Updating as necessary.

Remove qib_get_unit_name() function.

Update log message that has redundant device name.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/rdmavt: Allocate CQ memory on the correct node

CQ allocation does not ensure that completion queue entries
and the completion queue structure are allocated on the correct
numa node.

Fix by allocating the rvt_cq and kernel CQ entries on the device node,
leaving the user CQ entries on the default local node.  Also ensure
CQ resizes use the correct allocator when extending a CQ.

Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/hfi1: Fix infinite loop in 8051 command error path

When an 8051 command times out, the entire DC block is restarted. During
the restart, the host interface version bit is set, which calls
do_8051_command() recursively. The host version bit needs to be set
before the link moves into polling, so the host version bit can be set
in set_local_link_attributes() instead. Thus, the 8051 command functions
can be simplied as a non-locking version (dd->dc8051_lock) of those
functions are no longer needed.

Fixes: 9be6a5d788b0 ("IB/hfi1: Prevent LNI out of sync by resetting host interface version")
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/rdmavt: Use correct numa node for SRQ allocation

Normal receive queue allocation ensures that kernel receive queues
are allocated on the local numa node. Shared receive queues
do not behave the same way.

Ensure that kernel shared receive queues are allocated on the device
local node.

Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/{rdmavt, hfi1, qib}: Remove get_card_name() downcall

rdmavt has a down call to client drivers to retrieve a crafted card
name.

This name should be the IB defined name.

Rather than craft the name each time it is needed, simply retrieve
the IB allocated name from the IB device.

Update the function name to reflect its application.

Clean up driver code to match this change.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

IB/{rdmavt, hfi1, qib}: Self determine driver name

Currently the HFI and QIB drivers allow the IB core to assign a unit
number to the driver name string.

If multiple devices exist in a system, there is a possibility that the
device unit number and the IB core number will be mismatched.

Fix by using the driver defined unit number to generate the device
name.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>