Luka Perkov [Tue, 10 Nov 2015 00:17:01 +0000 (00:17 +0000)]
kirkwood: rename EA3500/EA4500 profiles
Match the engineering board names now used elsewhere.
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 47436
Luka Perkov [Tue, 10 Nov 2015 00:16:56 +0000 (00:16 +0000)]
kirkwood: add diag LED on Linksys EA3500
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 47435
Luka Perkov [Tue, 10 Nov 2015 00:16:42 +0000 (00:16 +0000)]
kirkwood: support sysupgrade on Linksys EA[34]500
This automatically writes to the alternate firmware partition
(on Linksys's dual firmware layout) using code borrowed from
the WRT1900AC port.
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 47434
Luka Perkov [Tue, 10 Nov 2015 00:16:37 +0000 (00:16 +0000)]
kirkwood: support Linksys boot counter on EA[34]500
This is done with existing code from the WRT1900AC port.
It makes sure the "auto_recovery" bootloader option is set,
and resets the s_env boot counter after a successful boot.
This gives users without a serial console connection some
measure of safety.
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 47433
Luka Perkov [Tue, 10 Nov 2015 00:16:35 +0000 (00:16 +0000)]
kirkwood: generate factory images for Linksys EA[34]500
This is done with the new image generation system and board names.
It also generates a sysupgrade.tar image.
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 47432
Luka Perkov [Tue, 10 Nov 2015 00:16:33 +0000 (00:16 +0000)]
kirkwood: find active Linksys root partition
This is imported verbatim from the mvebu WRT1900AC port.
It picks up the current boot partition from the kernel command line,
then renames that partition "ubi" so that it auto-mounts.
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 47431
Luka Perkov [Tue, 10 Nov 2015 00:16:28 +0000 (00:16 +0000)]
kirkwood: consistently use engineering board names
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 47430
Luka Perkov [Tue, 10 Nov 2015 00:16:24 +0000 (00:16 +0000)]
kirkwood: rework Linksys EA[34]500 DTS
- Use board engineering names rather than marketing names
- Linksys uses a dual firmware layout, where the bootloader
will switch to the other stored image when one fails to
boot three consecutive times.
In order to make this firmware compatible with the factory
images and the stock bootloader we must match this layout.
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 47429
Luka Perkov [Tue, 10 Nov 2015 00:16:14 +0000 (00:16 +0000)]
kirkwood: enable squashfs-on-ubiblock support
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 47428
Felix Fietkau [Sun, 8 Nov 2015 20:40:15 +0000 (20:40 +0000)]
mac80211: restricted automatic channel selection
Add a new config option "channels" for mac80211 wifi devices. It's only
valid if automatic channel selection is used and restricts the channel
selection to one of the given channels.
config wifi-device
list channels 1
list channels 6
list channels 11
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 47427
Felix Fietkau [Sun, 8 Nov 2015 20:40:03 +0000 (20:40 +0000)]
tools/e2fsprogs: update to 1.42.13
Update e2fsprogs to 1.42.13.
Refresh and cleanup patches.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
SVN-Revision: 47426
Felix Fietkau [Sun, 8 Nov 2015 20:39:54 +0000 (20:39 +0000)]
e2fsprogs: add packages for "chattr" and "lsattr"
Signed-off-by: Richard Kunze <richard.kunze@web.de>
SVN-Revision: 47425
Felix Fietkau [Sun, 8 Nov 2015 20:39:49 +0000 (20:39 +0000)]
conntrack-tools: split into conntrack/conntrackd
as conntrack and conntrackd are completely independent programs,
serving a different purpose.
Also split by other distributions, as Debian and Ubuntu.
Signed-off-by: Ulrich Weber <uw@ocedo.com>
SVN-Revision: 47424
Felix Fietkau [Sun, 8 Nov 2015 20:39:44 +0000 (20:39 +0000)]
conntrack-tools: upgrade to 1.4.3
Signed-off-by: Ulrich Weber <uw@ocedo.com>
SVN-Revision: 47423
Felix Fietkau [Sun, 8 Nov 2015 20:39:37 +0000 (20:39 +0000)]
conntrack-tools: remove default config file
default configuration will fill up disk by
writing /var/log/conntrackd-stats.log
Introduced due init script auto start.
Signed-off-by: Ulrich Weber <uw@ocedo.com>
SVN-Revision: 47422
Felix Fietkau [Sun, 8 Nov 2015 20:39:24 +0000 (20:39 +0000)]
x86: add generic profiles to x86_64, kvm_guest and xen_domu
The imagebuilder requires a profile for every subtarget to work.
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 47421
Felix Fietkau [Sun, 8 Nov 2015 20:39:18 +0000 (20:39 +0000)]
ar71xx: add support for TP-LINK TL-WR941ND v6 (international version)
The international version is completely different from the already
supported Chinese version. The WLAN of the QCA956x SoC used by this router
has been fixed in r46948.
This patch looks like it changes a lot in
700-MIPS-ath79-openwrt-machines.patch; that is not the case. Unfortunately,
quilt decided to completely reorganize the Kconfig patch even though only
a single section has been added.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 47420
Felix Fietkau [Sun, 8 Nov 2015 20:39:09 +0000 (20:39 +0000)]
uhttpd: update to the latest version, adds support for redirect helper scripts
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47419
Felix Fietkau [Sun, 8 Nov 2015 20:39:01 +0000 (20:39 +0000)]
libubox: update to the latest version, adds a small json_script feature
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47418
Felix Fietkau [Sat, 7 Nov 2015 18:33:45 +0000 (18:33 +0000)]
ar71xx: fix typo in r47416
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47417
Felix Fietkau [Sat, 7 Nov 2015 16:22:38 +0000 (16:22 +0000)]
ar71xx: fix alignment of struct arpt_arp (fixes #14577)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47416
Felix Fietkau [Sat, 7 Nov 2015 16:22:31 +0000 (16:22 +0000)]
kernel: remove kmod-xen-kbddev, it is already enabled in the kernel config
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47415
Felix Fietkau [Sat, 7 Nov 2015 16:22:23 +0000 (16:22 +0000)]
kernel: remove kmod-acpi-button package, it is already built into the kernel
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47414
Felix Fietkau [Sat, 7 Nov 2015 16:22:18 +0000 (16:22 +0000)]
toolchain: remove obsolete kernel version check
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47413
Felix Fietkau [Sat, 7 Nov 2015 16:22:08 +0000 (16:22 +0000)]
kernel: remove linux 4.0 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47412
Felix Fietkau [Sat, 7 Nov 2015 13:19:35 +0000 (13:19 +0000)]
image: append-ubi: add optional UBI subpage size
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 47411
Felix Fietkau [Sat, 7 Nov 2015 12:52:14 +0000 (12:52 +0000)]
tools/quilt: fix build error during kernel_menuconfig on a cleaned env
When running "make kernel_menuconfig" right after "make clean", we error
out with the following message:
Makefile:22: recipe for target '.../build_dir/target-arm_cortex-a7_musl-1.1.10_eabi/linux-.../linux-3.18.18/.quilt_checked' failed
make[2]: [.../build_dir/target-arm_cortex-a7_musl-1.1.10_eabi/linux-.../linux-3.18.18/.quilt_checked]
Error 127 (ignored)
The root cause of the problem is located in the OpenWrt specific quilt
patch, which sets the quilt install directory to $STAGING_DIR/../host.
However, on a clean environment (right after running "make clean"),
$STAGING_DIR doesn't exist. The "quilt" executable doesn't find its
different commands, errors out, and creates this message.
We're fixing it by using $STAGING_DIR_HOST rather than $STAGING_DIR,
which is absolute. It will work even if there is no target directory
yet.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47410
Felix Fietkau [Sat, 7 Nov 2015 12:52:07 +0000 (12:52 +0000)]
rules.mk: export STAGING_DIR_HOST to sub-makefiles and shells
Certains host packages (like quilt) need to know the previously used
install location at run-time. They currently use $STAGING_DIR, which
causes issues on cleaned environment, where $STAGING_DIR doesn't exist
yet.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 47409
Felix Fietkau [Sat, 7 Nov 2015 12:52:01 +0000 (12:52 +0000)]
mac80211: set mcast-rate for mesh point interfaces
In order to set the multicast rate for mesh point interfaces the "mesh join"
was made explicit and moved to mac80211_setup_vif(), similar to how it is
done for IBSS interfaces.
Previously, the mesh join was made implicit in case authentication (i.e.
$key) was not used when creating the interface in mac80211_prepare_vif(),
while using authentication would create the interface first, then join
later in mac80211_setup_vif() by starting authsae.
Signed-off-by: Nils Schneider <nils@nilsschneider.net>
SVN-Revision: 47408
Felix Fietkau [Sat, 7 Nov 2015 12:51:48 +0000 (12:51 +0000)]
ramips: minor fixes for mt7621 profiles
* remove references to non-existing kmod-usb3-mt7621
* ZTB WG2626 doesn't have an RTC (thanks to Piotr Dymacz!)
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 47407
Felix Fietkau [Sat, 7 Nov 2015 12:51:43 +0000 (12:51 +0000)]
ar71xx: add support for the TP-LINK TL-WR1043ND v3
The hardware of the v3 is identical to the v2.
Based-on-patch-by: Andreas Ziegler <github@andreas-ziegler.de>
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 47406
Felix Fietkau [Sat, 7 Nov 2015 12:51:39 +0000 (12:51 +0000)]
ar71xx: Add support for ZyXEL NBG6616.
Signed-off-by: Benjamin Berg <benjamin@sipsolutions.net>
SVN-Revision: 47405
Felix Fietkau [Sat, 7 Nov 2015 12:51:31 +0000 (12:51 +0000)]
include/image.mk: Introduce generic option to wrap kernel into JFFS2
Some devices require the kernel to be in a JFFS2 file system. Make the
support for this more generic so that it can be used by other devices.
Signed-off-by: Benjamin Berg <benjamin@sipsolutions.net>
SVN-Revision: 47404
Felix Fietkau [Sat, 7 Nov 2015 12:51:24 +0000 (12:51 +0000)]
include/image.mk: introduce KERNEL_INITRAMFS_NAME variable
In case if we're interested in generation of non-binary images
(for example if we want images to be valid .elfs - and that's what we
want for ARC now) we have to instruct Device/Build/initramfs target to
use input file with some extension (in case of ARC it will be
essentially .elf).
Otherwise default binary vmlinux-initramfs (without extension) is used and
resulting images then are binaries instead of elfs.
Now having KERNEL_INITRAMFS_NAME variable it's possible to substitute
default $$(KERNEL_NAME)-initramfs with preferred option like
$$(KERNEL_NAME)-initramfs.elf.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Felix Fietkau <nbd@openwrt.org>
Cc: John Crispin <blogic@openwrt.org>
SVN-Revision: 47403
Felix Fietkau [Sat, 7 Nov 2015 12:12:08 +0000 (12:12 +0000)]
mac80211: disable a broken feature that was merged with the last update
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47402
Felix Fietkau [Sat, 7 Nov 2015 12:11:44 +0000 (12:11 +0000)]
uClibc: mark as broken for all architectures that use musl by default
We will only support uClibc for targets that actually need it.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47401
Felix Fietkau [Fri, 6 Nov 2015 10:53:35 +0000 (10:53 +0000)]
toplevel.mk: fix distclean
- remove logs like "make dirclean" does
- remove key-build*
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 47397
Felix Fietkau [Fri, 6 Nov 2015 10:53:27 +0000 (10:53 +0000)]
toolchain/gdb: update to 7.10, sync with target package version
Update toolchain gdb to 7.10.
Refresh patches.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
SVN-Revision: 47396
Felix Fietkau [Fri, 6 Nov 2015 10:53:19 +0000 (10:53 +0000)]
kernel: omap_wdt module load typo
autoload should be without .ko module extension
Signed-off-by: Ulrich Weber <uw@ocedo.com>
SVN-Revision: 47395
Felix Fietkau [Fri, 6 Nov 2015 10:53:11 +0000 (10:53 +0000)]
kernel: load softdog on boot
same as for hardware watchdogs, otherwise
procd cannot initialize it.
Signed-off-by: Ulrich Weber <uw@ocedo.com>
SVN-Revision: 47394
Felix Fietkau [Fri, 6 Nov 2015 10:53:07 +0000 (10:53 +0000)]
tools/mm-macros: update to 0.9.8
Update mm-macros to 0.9.8.
Add a secondary download location.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
SVN-Revision: 47393
Felix Fietkau [Fri, 6 Nov 2015 10:53:01 +0000 (10:53 +0000)]
tools/scons: update to 2.4.0
Update scons to 2.4.0.
Change mirror (as the previous one is missing the current version).
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
SVN-Revision: 47392
Felix Fietkau [Fri, 6 Nov 2015 10:52:52 +0000 (10:52 +0000)]
px5g: Use SHA-256 when generating self-signed certificates
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 47391
John Crispin [Thu, 5 Nov 2015 10:03:58 +0000 (10:03 +0000)]
ramips: fix previous commit
r47388 accidentially changed 2 files too many
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 47389
John Crispin [Thu, 5 Nov 2015 10:01:23 +0000 (10:01 +0000)]
ramips: minor tweak to the lks7688 baord name
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 47388
Felix Fietkau [Wed, 4 Nov 2015 23:46:59 +0000 (23:46 +0000)]
busybox: enable ip rule support by default (required for dealing with route tables)
Adds about 1.2k gzip-compressed
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47387
Luka Perkov [Wed, 4 Nov 2015 22:28:47 +0000 (22:28 +0000)]
kirkwood: add support for 4.3
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 47386
Luka Perkov [Wed, 4 Nov 2015 22:28:42 +0000 (22:28 +0000)]
kirkwood: pogo_e02: use mainline led definitions
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 47385
Luka Perkov [Wed, 4 Nov 2015 22:28:40 +0000 (22:28 +0000)]
kernel: update kernel 4.3-rc7 to version 4.3
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 47384
Felix Fietkau [Wed, 4 Nov 2015 22:17:40 +0000 (22:17 +0000)]
uboot-envtools: fix various compile breakage issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47383
Felix Fietkau [Wed, 4 Nov 2015 18:33:12 +0000 (18:33 +0000)]
librpc: update to the latest version, fixes build with uclibc-ng (#20856)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47382
Jonas Gorski [Wed, 4 Nov 2015 11:33:31 +0000 (11:33 +0000)]
ipq806x: fix BOARD_NAME spellings
the board names used by the upgrade check differ from the device names
in case, so always set them. We can't rely on tolower or similar since
different locales might have different rules for lower case letters, so
set them explicitily.
Fixes sysupgrade rejecting *-sysupgrade.tar because of the difference.
Signed-off-by: Kaspar Schleiser <kaspar@schleiser.de>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 47381
Jonas Gorski [Wed, 4 Nov 2015 11:33:22 +0000 (11:33 +0000)]
brcm63xx: work around boot failures with squashfs on BCM6368
Due to the LWL/LWR SMP issue on BCM6368, booting with squash might fail
if the rootfs is not word aligned. As a quick fix, work around it by
ensuring this condition is always true.
Reported-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 47380
Jonas Gorski [Wed, 4 Nov 2015 11:33:16 +0000 (11:33 +0000)]
brcm63xx: fix brcm, bcm6345-ext-intc interrupt controller
brcm,field-width is read but unused
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 47379
Jonas Gorski [Wed, 4 Nov 2015 11:33:10 +0000 (11:33 +0000)]
brcm63xx: fix Netgear CVG834G HCS magic bytes
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 47378
Jonas Gorski [Wed, 4 Nov 2015 11:33:07 +0000 (11:33 +0000)]
brcm63xx: lzma-loader: add BCM3380 support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 47377
Jonas Gorski [Wed, 4 Nov 2015 11:33:03 +0000 (11:33 +0000)]
brcm63xx: lzma-loader: add BCM3368 support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 47376
Jonas Gorski [Wed, 4 Nov 2015 11:32:55 +0000 (11:32 +0000)]
brcm63xx: fix BCM3368 external interrupts
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 47375
John Crispin [Tue, 3 Nov 2015 13:32:02 +0000 (13:32 +0000)]
ramips: add feature to blink led on sysupgrade
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 47373
Felix Fietkau [Tue, 3 Nov 2015 12:00:53 +0000 (12:00 +0000)]
scripts/config: fix handling of CONFDEFAULT on oldconfig
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47372
Felix Fietkau [Tue, 3 Nov 2015 12:00:36 +0000 (12:00 +0000)]
mac80211: fix kconf handling of allnoconfig, fixes spurious brcmfmac related build errors
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47371
Felix Fietkau [Tue, 3 Nov 2015 12:00:04 +0000 (12:00 +0000)]
tools/bison: update to 3.0.4
Update bison to 3.0.4.
Refresh patches.
Drop the unnecessary PKG_CAT definition.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
SVN-Revision: 47370
Felix Fietkau [Tue, 3 Nov 2015 11:59:49 +0000 (11:59 +0000)]
tools/mpfr: update to 3.1.3
Update mpfr to version 3.1.3.
Refresh patches.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
SVN-Revision: 47369
Felix Fietkau [Tue, 3 Nov 2015 11:59:35 +0000 (11:59 +0000)]
tools/mpc: update to 1.0.3
Update mpc version to 1.0.3.
Change download location to @GNU.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
SVN-Revision: 47368
Felix Fietkau [Tue, 3 Nov 2015 11:59:09 +0000 (11:59 +0000)]
lldpd: implement a reload hook
Seems the default one is not working as expected.
The way that reload should work is that the 'start' service
call should return 1 (if lldpd is running) and then a normal
restart would be called.
However, for lldpd a reload would mean just clearing all custom TLVs
(if they're configured) and reloading the configuration.
So, this patch adds a reload hook, which would:
- 'start' lldpd if it's not running (because we return 1 if not running)
- reload configuration if it is running (also previously
clearing custom TLVs if present)
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
SVN-Revision: 47367
Imre Kaloz [Tue, 3 Nov 2015 11:07:30 +0000 (11:07 +0000)]
uboot: create the uboot config file for the shelby as well
fixes #20827
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 47365
Felix Fietkau [Mon, 2 Nov 2015 18:26:15 +0000 (18:26 +0000)]
mac80211: fix crash when using mesh (11s) VIF together with another VIF
llid_in_use needs to be limited to stations of the same VIF, otherwise it
will cause a NULL deref as the sta_info of non-mesh-VIFs don't have
sta->mesh set.
Steps to reproduce:
modprobe mac80211_hwsim channels=2
iw phy phy0 interface add ibss0 type ibss
iw phy phy0 interface add mesh0 type mp
iw phy phy1 interface add ibss1 type ibss
iw phy phy1 interface add mesh1 type mp
ip link set ibss0 up
ip link set mesh0 up
ip link set ibss1 up
ip link set mesh1 up
iw dev ibss0 ibss join foo 2412
iw dev ibss1 ibss join foo 2412
# Ensure that ibss0 and ibss1 are actually associated; I often need to
# leave and join the cell on ibss1 a second time.
iw dev mesh0 mesh join bar
iw dev mesh1 mesh join bar # crash
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 47364
Felix Fietkau [Mon, 2 Nov 2015 18:20:51 +0000 (18:20 +0000)]
ar71xx: use correct PLL configuration register bitmask for QCA956x SoC.
Incorrect value causes clock inaccuracy as huge as 1/60.
Signed-off-by: Dmitry Ivanov <dima@ubnt.com>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47363
Felix Fietkau [Mon, 2 Nov 2015 18:12:59 +0000 (18:12 +0000)]
busybox: enable find mtime support by default
busybox binary in openwrt neither supports stat nor find
mtime. This patch adds find mtime support by default.
I've compared ipk size for three different targets
(ar71xx, brcm2708, x86):
209908 Okt 16 13:48 busybox_1.23.2-3_ar71xx.ipk-0before
210031 Okt 16 16:47 busybox_1.23.2-3_ar71xx.ipk-1after
difference: +123 Byte
223519 Okt 16 13:06 busybox_1.23.2-3_brcm2708.ipk-0before
223720 Okt 16 13:53 busybox_1.23.2-3_brcm2708.ipk-1after
difference: +201 Byte
221477 Okt 16 13:47 busybox_1.23.2-3_x86_64.ipk-0before
221622 Okt 16 13:52 busybox_1.23.2-3_x86_64.ipk-1after
difference: +145 Byte
Signed-off-by: Dirk Brenken <dirk@brenken.org>
SVN-Revision: 47362
Felix Fietkau [Mon, 2 Nov 2015 18:12:54 +0000 (18:12 +0000)]
hostapd: add default value to eapol_version (#20641)
r46861 introduced a new option eapol_version to hostapd, but did not
provide a default value. When the option value is evaluated,
the non-existing value causes errors to the systen log:
"netifd: radio0: sh: out of range"
Add a no-op default value 0 for eapol_version. Only values 1 or 2 are
actually passed on, so 0 will not change the default action in hostapd.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
SVN-Revision: 47361
Felix Fietkau [Mon, 2 Nov 2015 18:12:45 +0000 (18:12 +0000)]
update config.guess & config.sub
These are from today's master branch of:
http://git.savannah.gnu.org/gitweb/?p=config.git;a=tree
In particular it adds support for ARC architecture plus some more
improvements and fixes.
This patch is built-tested against NetGear WNDR3800.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Florian Fainelli <florian@openwrt.org>
Cc: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 47360
Felix Fietkau [Mon, 2 Nov 2015 18:12:29 +0000 (18:12 +0000)]
include/kernel.mk - better search for ARCH
If "findstring" is used without leading and trailing spaces unexpected matches
may happen. For example consider ARC=arc then "findstring $(ARCH)" will
report a false match with "aarch64".
But "findstring $ARCH " (note trailing space) will correctly skip
matches for both "aarch64" and "aarch64_be".
This patch is built-tested against NetGear WNDR3800.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Felix Fietkau <nbd@openwrt.org>
Cc: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47359
Felix Fietkau [Mon, 2 Nov 2015 18:12:23 +0000 (18:12 +0000)]
iproute2: always use -DHAVE_SETNS, since the old uclibc is gone now
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47358
Felix Fietkau [Mon, 2 Nov 2015 18:12:16 +0000 (18:12 +0000)]
uclibc: remove version 0.9.33
Latest uClibc-ng is now the only supported option
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47357
Felix Fietkau [Mon, 2 Nov 2015 18:12:10 +0000 (18:12 +0000)]
uclibc-ng: bump version from 1.0.6 to 1.0.8
2 new architectures were added in between 1.0.6 and 1.0.8 in uClibc-ng,
these are:
* lm32
* or1k
Even thought both are not yet supported in OpenWRT it's important to
disable them both in default config file otherwise user prompt will
appear during uClibc configuration asking to select desired
architecture.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Waldemar Brodkorb <wbx@uclibc-ng.org>
Cc: Mathieu Olivari <mathieu@codeaurora.org>
Cc: Felix Fietkau <nbd@openwrt.org>
Cc: John Crispin <blogic@openwrt.org>
SVN-Revision: 47356
Felix Fietkau [Mon, 2 Nov 2015 18:12:01 +0000 (18:12 +0000)]
toolchain: use glibc instead of uclibc for mips64 by default - uclibc is still buggy there in a few places
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47355
John Crispin [Mon, 2 Nov 2015 10:18:50 +0000 (10:18 +0000)]
mediatek: add support for the new MT7623 Arm SoC
the support is still WIP. next steps are to make the pmic and ethernet work.
this is the first commit to make sure nothing gets lost.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 47354
John Crispin [Mon, 2 Nov 2015 10:18:29 +0000 (10:18 +0000)]
fstools: update to latest git HEAD
update libblkid code and add support for F2SF
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 47353
John Crispin [Mon, 2 Nov 2015 10:18:24 +0000 (10:18 +0000)]
uboot-lantiq: Add SoC version 1.2 support for Arcadyan VGV7510KW22
This fixes #20409
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 47352
John Crispin [Mon, 2 Nov 2015 10:18:19 +0000 (10:18 +0000)]
ramips: add support for ZBT WG2626
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 47351
John Crispin [Mon, 2 Nov 2015 10:18:09 +0000 (10:18 +0000)]
ramips: add eeprom mtd partition to the Asus RP-N53 dts
This patch adds the eeprom property to the dts for the Asus RP-N53. It is necessary to get the wifi in the soc working.
Signed-off-by: Alberto Mattea <alberto@mattea.info>
SVN-Revision: 47350
John Crispin [Mon, 2 Nov 2015 10:18:02 +0000 (10:18 +0000)]
ramips: preinit: use iproute2 instead of vconfig
Replace use of vconfig with the corresponding iproute2 syntax in
/lib/preinit/07_set_preinit_iface_ramips
The switch reset work-around needed on some ramips targets used the
deprecated vconfig tool to bring up the pre-init/failsafe interface.
This doesn't work on recent builds where vconfig is no longer being
deployed, resulting in the device being unreachable when triggered
into failsafe mode.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 47349
John Crispin [Mon, 2 Nov 2015 10:17:51 +0000 (10:17 +0000)]
ramips: add support for Dovado tiny AC
Add support for Dovado tiny AC wifi router.
Soc: mt7620a
ram: 64MB
flash: 8MB
1x usb 2.0
two gigabit lan ports
5ghz wlan is not supported on this board since there is no gpl driverfor mt7610e wifi chip.
Signed-off-by: Andrej Vlasic <andrej.vlasic0@gmail.com>
SVN-Revision: 47348
John Crispin [Mon, 2 Nov 2015 10:17:41 +0000 (10:17 +0000)]
ramips: add function to change rt2x00 wifi eeprom mac
Some boards like dovado tiny ac have generic ralink mac in onflash wifi eeprom.
Add eeprom_set_macaddr function to rt2x00 eeprom extract script which changes mac addr insde eeprom dump.
Signed-off-by: Andrej Vlasic <andrej.vlasic0@gmail.com>
SVN-Revision: 47347
John Crispin [Mon, 2 Nov 2015 10:17:35 +0000 (10:17 +0000)]
ramips: mt7620 add icplus phy driver kernel config symbol
Add missing icplus phy driver kernel config symbol to mt7620 subtarget.
This is needed since some mt7620 devices have icplus ip1001 ethernet transceiver
Signed-off-by: Andrej Vlasic <andrej.vlasic0@gmail.com>
SVN-Revision: 47346
John Crispin [Mon, 2 Nov 2015 10:17:26 +0000 (10:17 +0000)]
ramips: add support for the Asus RP-N53 in the "02_network" boot script
This patch adds a case for the Asus RP-N53 in the "02_network" boot script. Without this, the lan interface does not get configured on startup, effectively bricking the device.
Signed-off-by: Alberto Mattea <alberto@mattea.info>
SVN-Revision: 47345
John Crispin [Mon, 2 Nov 2015 10:17:15 +0000 (10:17 +0000)]
ar71xx: Add support for wdr7500v3
The device is similar to Archer C7 v2, but with 8M of flash, and 6 external
antennas. Reason for breaking the naming pattern is that sticker on the back
mentions "WDR7500" and has no mention of "Archer".
Signed-off-by: Srdjan Rosic <rosic@google.com>
SVN-Revision: 47344
John Crispin [Mon, 2 Nov 2015 10:17:09 +0000 (10:17 +0000)]
omap/Beagleboard: remove FEATURES override
It overrides the feature list of the whole target.
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 47343
John Crispin [Mon, 2 Nov 2015 10:17:03 +0000 (10:17 +0000)]
scripts/checkpatch.pl: Fix deprecation warnings
In perl version v5.22, use of unescaped opening braces is deprecated
Signed-off-by: Javier Domingo Cansino <javierdo1@gmail.com>
SVN-Revision: 47342
John Crispin [Mon, 2 Nov 2015 10:16:56 +0000 (10:16 +0000)]
ramips: rt305x: enable seama mtdsplit parser
D-Link DIR-610 A1 needs seama mtdsplit parser.
This patch should fix #18046.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
SVN-Revision: 47341
John Crispin [Mon, 2 Nov 2015 10:16:48 +0000 (10:16 +0000)]
ramips: rt305x: update kernel config symbols
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
SVN-Revision: 47340
John Crispin [Mon, 2 Nov 2015 10:16:40 +0000 (10:16 +0000)]
musl: add upstream patch for open_[w]memstream
This patch fixes corner case in open_memstrem, when stream is created,
but nothing is written.
This case is present in tgtadm, tgtd management tool.
Signed-off-by: Maxim Storchak <m.storchak@gmail.com>
SVN-Revision: 47339
John Crispin [Mon, 2 Nov 2015 10:16:28 +0000 (10:16 +0000)]
package/devel/perf: fix build for kernel 4.1
This fix contains 2 parts:
- kernel 4.1: backport upstream patch "perf build: Do not fail on missing Build file"
- add NO_LZMA=1 to perf MAKE_FLAGS to disable LZMA support
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
SVN-Revision: 47338
Rafał Miłecki [Sun, 1 Nov 2015 22:21:59 +0000 (22:21 +0000)]
bcm53xx: Netgear R8000: define GPIO powering USB ports
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 47337
Rafał Miłecki [Sun, 1 Nov 2015 22:21:49 +0000 (22:21 +0000)]
bcm53xx: replace USB patch fixing power control with the most recent version
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 47336
Hauke Mehrtens [Sun, 1 Nov 2015 13:45:57 +0000 (13:45 +0000)]
kernel: update kernel 3.18 to version 3.18.23
Changelog:
* https://cdn.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.22
* https://cdn.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.23
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47334
Felix Fietkau [Sun, 1 Nov 2015 12:38:44 +0000 (12:38 +0000)]
ar71xx: fix regression in building TL-WDR6500-v2 images
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47333
Felix Fietkau [Sun, 1 Nov 2015 12:38:38 +0000 (12:38 +0000)]
kobs-ng: fix compile errors
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47332
Felix Fietkau [Sun, 1 Nov 2015 12:19:32 +0000 (12:19 +0000)]
imx6: add v4.1 support
Build and boot tested on the following hardware:
* GW54xx
* GW53xx
* GW52xx
* GW51xx
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>
SVN-Revision: 47331
Luka Perkov [Sun, 1 Nov 2015 01:13:16 +0000 (01:13 +0000)]
kirkwood: add initial support for NSA310s
Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 47330
projects / openwrt / staging / kaloz.git / log