compat-wireless: use linux-stable instead of linux-2.6-allstable

I used to use hpa's linux-2.6-allstable.git tree to make
stable releases of compat-wireless. This allowed me to
make updates to the stable releases whenever a 2.6.x.y
extraversion got out -- but also to make updates whenever
Linus updated his own tree so I can make RC releases
based on the latest RC release. Greg has taken over of
that tree and its now called linux-stable.git. What I am
seeing though is that the linux-stable git tree now seems
to not update as often to Linus' tree. This is fine as all
I have to do is add Linus' tree as a remote and fetch
those objects and then reset the tree to say, v3.2-rc6
and that'll get what Linus' tree looks like today.

This patch just changes the path where we pick up stable
releases from but also documents this change in case
anyone that wants to make stable release must also add
Linus' tree as a remote and fetch those objects.

Cc: greg@kroah.com
CC: kvalo@qca.qualcomm.com
Cc: linville@tuxdriver.com
Cc: senthilb@qca.qualcomm.com
Cc: johannes@sipsolutions.net
Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

Enable CONFIG_RT2800{PCI,USB}_RT53XX

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: check if modprobe exists before using it

If you're cross-compiling compat-wireless on a different host, you
can't reliably use modprobe.  The host system may not even have
modprobe, so it doesn't make sense to run modprobe, unless you're
installing the modules on the target machine.

The modprobe command was being used unconditionally to set the MADWIFI
and OLD_IWL variables.  This commit adds a check to see whether
modprobe exists before trying to use.  It also adds a dependency on
the modprobe commands to all recipes that rely on it, so we fail more
gracefully if modprobe doesn't exist in the system.

Reported by: William List <wlist@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>

compat-wireless: build: Throw error if space in path

Because of make limitations, the build will fail if there are spaces in
the path leading to the compat-wireless directory.
I tried to make it work anyway for a while and, while it probably is
possible, it would involve rewriting part of kbuild and well...
This at least throws up nicely if there is a space in the path.

Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wirless: refresh patches

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: refresh patches for next-20120109

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: refresh patches

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: clarify patches/46-use_other_workqueue.patch

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: clarify patches/47-no_trans_start_on_netdev_queue.patch

Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: no trans_start on netdev_queue

struct netdev_queue does not have the attribute trans_start in kernel <
2.6.31. trans_start on struct net_device does the same on older kernels.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: use other workqueue

Old kernel versions do not support WQ_HIGHPRI and WQ_MEM_RECLAIM so we
should use create_singlethread_workqueue() which was used at this
position before.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: make patches apply again

* sk_add_backlog() is no longer used in net/bluetooth/l2cap_core.c so
the patch is not needed any more.
* ath6k got some now functions and the patches did not apply any more.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: CONFIG_BT_L2CAP and CONFIG_BT_SCO removed

The config options CONFIG_BT_L2CAP and CONFIG_BT_SCO were removed from
the kernel and this patch removes them from compat-wireless.

commit f1e91e1640d808d332498a6b09b2bcd01462eff9
Author: Ulisses Furquim <ulisses@profusion.mobi>
Date:   Wed Dec 21 01:32:09 2011 -0200

    Bluetooth: Always compile SCO and L2CAP in Bluetooth Core

    The handling of SCO audio links and the L2CAP protocol are essential to
    any system with Bluetooth thus are always compiled in from now on.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: remove platform_device_id for kernel < 2.6.30

Kernel < 2.6.30 do not support struct platform_device_id, so remove it
for them and hope that the probing will reject an invalid device.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: compile fix for commit patches/09-threaded-irq.patch

This commit had some compile problem with kernel < 2.6.32

commit c486a4fcc5ddfb3232edfd0489fe63ffc1fa8aea
Author: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Date:   Tue Dec 13 10:40:55 2011 -0800

    compat-wireless: fix patches/09-threaded-irq.patch

There was a semicolon missing at the end of a line and wl1271_hardirq
has to be renamed to wl12xx_hardirq.
This is now compile tested with all maijor kernel version from 2.6.27.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@frijolero.org>

compat-wireless: copy driver files only if present

This modifies admin-update.sh to only copy files over
from a driver target directory if files are found. This
should avoid a bunch of complaints of copying files
from directories that are just placeholders for other
folders, as happens with drivers/net/wireless/brcm80211/
which has folders a Makefile, Kconfig but no files there
itself:

brcmfmac/
brcmsmac/
brcmutil/
include
Kconfig
Makefile

Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>

compat-wireless: refresh patches

automatic refresh

Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>

compat-wireless: fix patches/09-threaded-irq.patch

This fixes patches/09-threaded-irq.patch hunk breakage
caused due to changes in the upstream wireless-testing
commit a390e85:

Author: Felipe Balbi <balbi@ti.com>
Date:   Thu Oct 6 10:07:44 2011 +0300

    wl12xx: move common init code from bus modules to main

    Move all common parts from sdio.c and spi.c to main.c, since they now
    can be handled as part of the platform driver.

Signed-off-by: Felipe Balbi <balbi@ti.com>
    [forward-ported, cleaned-up and rephrased commit message]
    [added a bunch of fixes and a new pdata element]
    [moved some new code into main.c as well]
Signed-off-by: Luciano Coelho <coelho@ti.com>
This goes not compile tested, apart from *all* the things
a390e85 changes one minor change was instead of using
DRIVER_NAME in the request_threaded_irq() it now uses
pdev->name, and pdev is struct platform_device. Too lazy
to git checkout v2.6.30 to test compile against that
kernel but at least:

git blame include/linux/platform_device.h v2.6.30

seems to show that the pdev->name char was added by
Russell King via bbbf508d on v2.6.15 so this should
compile down to that kernel.

mcgrof@tux ~/linux-2.6-allstable (git::master)$ git describe --contains bbbf508d
v2.6.15-rc1~59^2~6^2~2

Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>

compat-wireless: fix patches/08-rename-config-options.patch

wl12xx_sdio_test module was removed

Signed-off-by: Eliad Peller <eliad@wizery.com>

compat-wireless: refresh patches

Synchs with linux-next tag 20111205

Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>

compat-wireless deactivate mac80211 tracing for old kernels

Activating tracing on kernel <= 2.6.32 causes build errors.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat-wireless: fix brcm80211 driver-select

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat-wireless: add some missing config options

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat-wireless: fix driver-select for intel

iwlagn was renamed and iwlegacy was added

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat-wireless: remove some modules from Makefile

The removed build targets are not shipped with compat-wireless.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat-wireless: add config var for CORDIC and CRC8

Sometimes the kernel version compat-wireless is build against has
support for cordic and crc8 in its source, but these modules were not
build when the kernel was build, because no one selected them. The modules are
needed for the bcmsmac driver and they should be build every time when
they were not already build while the kernel was build.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat-wireless: refresh patches

Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>

compat-wireless: fix patches/39-remove_blink_set.patch

More fall-out from the refactoring of iwlegacy...

Signed-off-by: John W. Linville <linville@tuxdriver.com>

compat-wireless: fix patches/38-led-max-brightness.patch

More fall-out from the refactoring of iwlegacy...

Signed-off-by: John W. Linville <linville@tuxdriver.com>

compat-wireless: fix patches/11-dev-pm-ops.patch

More fall-out from the refactoring of iwlegacy...

Signed-off-by: John W. Linville <linville@tuxdriver.com>

compat-wireless: fix patches/08-rename-config-options.patch

This requird a bit of changes due to some file changes on
the iwlegacy driver.

Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>

compat-wireless: escape &

& needs to be escaped.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat-wireless: make patches apply again

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat-wireless: change CONFIG_IWLAGN -> CONFIG_IWLWIFI

This Kconfig option changed in the 2.6.32 timeframe.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>

compat-wireless: make patches apply again

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat-wireless: remove kfree_rcu() patch

kfree_rcu() is now backported in compat, this patch is not needed any more.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat-wireless: add support for kernel 3.2

Increase the maximum supported kernel version and generate COMPAT_3_3.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat-wireless: support RHEL6 as a build target

This patch enables compatibility with RHEL6 as a build target.  This
mostly includes changes to the configuration system.

Infrastructure is added to config.mk to provide a series of RHEL
compatibility definitions (e.g. CONFIG_COMPAT_RHEL_6_1).  A couple of
checks are added to set appropriate config options for RHEL6 kernels.
Finally, gen-compat-autoconf.sh is modified to correctly handle the
CONFIG_COMPAT_RHEL_* usage in config.mk.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>

compat-wireless: add CONFIG_COMPAT_BT_SOCK_CREATE_NEEDS_KERN

An API change in the 2.6.33 timeframe made a number of bluetooth
functions require an extra parameter.  Some kernels (e.g. RHEL6)
backport that API change, and this allow us to accommodate them.

This adds CONFIG_COMPAT_BT_SOCK_CREATE_NEEDS_KERN to config.mk and
modifies an existing patch for the Bluetooth subsystem.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>

compat-wireless: remove leading whitespace from CONFIG_COMPAT_FIRMWARE_CLASS

CONFIG_COMPAT_FIRMWARE_CLASS is being checked in compat-2.6.33.h, so it
needs to show-up in compat_autoconf.h.  Remove the leading whitespace,
so that gen-compat-autoconf.sh will treat it accordingly.

Signed-off-by: John W. Linville <linville@tuxdriver.com>

compat-wireless: add CONFIG_COMPAT_KFIFO setting to config.mk

Signed-off-by: John W. Linville <linville@tuxdriver.com>

compat-wireless: disable SKB TX status stamping in mac80211

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

compat-wireless: refresh patches for next-20111108

Synchs up with next-20111108

Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>

compat-wireless: backport rtlwifi PM

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat-wireless: refresh patches

Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>

compat-wireless: adapt moving brcm80211 to main area

brcm80211 is no staging driver any more and can be found in the main
area where all the other wireless drivers are now. There where some
changes needed for the move.
And BRCMFMAC does not depend on WEXT any more so remove that from
config.
BRCMFMAC does not build with kernel < 2.6.29, because
ndev->netdev_ops = NULL and ndev->netdev_ops == &brcmf_netdev_ops_pri
are not supported by the backport code for netdev_ops.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat-wireless: add struct padding to fix wext issue

See description in the patch :-)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

compat-wireless: make patches apply again

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat-wireless: make driver-select only select complete lines

Otherwise we end up enabling CONFIG_FOOBAR if
only CONFIG_FOO is requested.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

compat-wireless: deactivate sdio suspend in ath6kl with kernel < 2.6.34

The API to sdio suspend changed in kernel 2.6.34 and it is not
backported by compat. Just deactivate it when compat-wireless is
compiled for such an old kernel.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat-wireless: make patches apply again

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat-wireless: make patches apply again

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat-wireless: refresh patches

Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>

compat-wireless: make patches apply again.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat-wireless: remove old config options

Both config options have be removed from the Kconfig files in the
kernel and are not used by the code any more.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat-wireless: make patches apply again

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat-wireless: update patches

Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>

compat-wireless: fix multiqueue patch

One offset was no longer in proper context, this required
manual intervention. I'm going to start annotating these for
record keeping purposes with this notation:

Manual-patch-fix

Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>

compat-wireless: activate CONFIG_B43_PHY_HT

b43 HT-PHY is working now.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat-wireless: make patches apply again

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat-wireless: refresh patches

Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>

compat-wireless: make patches apply again

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat-wireless: pm_qos_request_list was renamed to pm_qos_request

In the following commit in linux-next pm_qos_request_list was renamed
to pm_qos_request:
commit b10ac0c24e4c618a99262ad47a1b0176f152883d
Author: Jean Pihet <j-pihet@ti.com>
Date:   Thu Aug 18 10:32:02 2011 +0200

    PM QoS: Minor clean-ups

Backporting it with a #define in compat did not worked as there is also
a function called pm_qos_request() and its name did not changed.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat-wireless: refresh patches

Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>

compat-wireless: fix building with CONFIG_CFG80211_INTERNAL_REGDB

When building with CONFIG_CFG80211_INTERNAL_REGDB set there is a db.txt
and genregdb.awk needed. $(srctree) contains the position of the kernel
source and not the position of the compat-wireless root directory.

Reported-by: Ed W <lists@wildgooses.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

comapt-wireless: make patches apply again

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat-wireless: add many fixes to driver-select

after driver-select was used it built often not needed modules. This is
now fixed for most options. Most of these problems where introduced
while a new driver was added to compat-wireless, but driver-select was
not updated.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat-wireless: adapt moving of ethernet drivers

The ethernet drivers where are not directly under drivers/net any more but now in drivers/net/ethernet/<vendor>.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat-wireless: do not build libertas_sdio for kernel < 2.6.32

if_sdio.c needs some new power management functions not available in
older kernel functions. When building for older kernel I get these
compiler errors:

/drivers/net/wireless/libertas/if_sdio.c: In function ‘if_sdio_power_save’:
/drivers/net/wireless/libertas/if_sdio.c:1071:2: error: implicit declaration of function ‘pm_runtime_put_sync’
/drivers/net/wireless/libertas/if_sdio.c: In function ‘if_sdio_power_restore’:
/drivers/net/wireless/libertas/if_sdio.c:1081:2: error: implicit declaration of function ‘pm_runtime_get_sync’
/drivers/net/wireless/libertas/if_sdio.c: In function ‘if_sdio_probe’:
/drivers/net/wireless/libertas/if_sdio.c:1231:2: error: implicit declaration of function ‘pm_runtime_put_noidle’
/drivers/net/wireless/libertas/if_sdio.c: In function ‘if_sdio_remove’:
/drivers/net/wireless/libertas/if_sdio.c:1268:2: error: implicit declaration of function ‘pm_runtime_get_noresume’

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat-wireless: ath6kl moved to main area.

ath6kl is now in the kernel main area and not in staging any more.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat-wireless: refresh patches

Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>

compat-wireless: add cfg80211-wext.h

This file was spitted out of include/net/cfg80211.h so we should
also ship it.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat-wireless: remove include of compat-2.6.h in cfg80211.h

The header file linux/compat-2.6.h is inclued through -include
$(M)/include/linux/compat-2.6.h in the main Makefile for a long time. This
includes all the compat-*.h files backporting some stuff needed to
compile on older kernels. We do not have to add this include into
cfg80211.h any more.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat-wireless: make patches apply again

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat-wireless: refresh patches

Signed-off-by: Luis R. Rodriguez <lrodriguez@qca.qualcomm.com>

compat-wireless: fix netdev patch so it can be applied

Signed-off-by: Luis R. Rodriguez <lrodriguez@qca.qualcomm.com>

compat-wireless: activate bcma support in b43

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat-wireless: copy include/crypto/aes.h now

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat-wireless: adapt some changes to atheros ethernet driver

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat-wireless: fix build of b43 on older kernels.

The structs in b43 changed.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat-wireless: make patches apply again

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat-wireless: refresh patches

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

compat-wireless: deactivate sido suspend for brcmfmac on older kernels.

With this patch the build does not break any more because of this commit:

commit da68c4eb258cd9f3f0b8aeb7e46b8118bb6358b6
Author: Nicolas Pitre <nico@fluxnic.net>
Date:   Fri Mar 5 13:43:31 2010 -0800

    sdio: introduce API for special power management features

This build error occurs without the patch on linux-2.6.32.
/drivers/staging/brcm80211/brcmfmac/bcmsdh_sdmmc.c: In function ‘brcmf_sdio_suspend’:
/drivers/staging/brcm80211/brcmfmac/bcmsdh_sdmmc.c:1087:2: error: ‘mmc_pm_flag_t’ undeclared (first use in this function)
/drivers/staging/brcm80211/brcmfmac/bcmsdh_sdmmc.c:1087:2: note: each undeclared identifier is reported only once for each function it appears in
/drivers/staging/brcm80211/brcmfmac/bcmsdh_sdmmc.c:1087:16: error: expected ‘;’ before ‘sdio_flags’
/drivers/staging/brcm80211/brcmfmac/bcmsdh_sdmmc.c:1088:2: warning: ISO C90 forbids mixed declarations and code
/drivers/staging/brcm80211/brcmfmac/bcmsdh_sdmmc.c:1092:2: error: ‘sdio_flags’ undeclared (first use in this function)
/drivers/staging/brcm80211/brcmfmac/bcmsdh_sdmmc.c:1092:2: error: implicit declaration of function ‘sdio_get_host_pm_caps’

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat-wireless: add some new config options for b43

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat-wireless: add rtl8192de

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat-wireless: do not set netlink seq.

This member is not available in older kernel versions.

This was introduced in commit:
commit 9720bb3ab0b80659c63ed337eab66104a4156db0
Author: Johannes Berg <johannes.berg@intel.com>
Date:   Tue Jun 21 09:45:33 2011 +0200

    nl80211: use netlink consistent dump feature for BSS dumps

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat-wireless: refresh patches for next-20110628

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

compat-wireless: fix 11-dev-pm-ops.patch for intel drivers

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

compat-wireless: refresh patches

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

compat-wireless: fix script for generating releases

The SUBLEVEL is now ignored for 3.0 kernels.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

compat-wireless: add some debug options.

These options are only needed for debugging so they are deactivated.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat-wireless: add CONFIG_B43_SSB and other b43 options.

CONFIG_B43_SSB is now needed to compile b43 with ssb support. The other
options are deactivated as the features they should activate are not
working for now.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat-wireless: make patches apply again

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat-wireless: refresh patches for next-20110614

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

compat-wireless: fix patch 29-sdio_no_suspend.patch

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

compat-wireless: add bcma

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat-wireless: add missing bluetooth header

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat-wireless: update enable-older-kernels patches

Add to compat-3.0-stable

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat-wireless: sync atheros-debug.mk with config.mk

Add to compat-3.0-stable

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat-wireless: activate CONFIG_RT2800{USB,PCI}_RT35XX by default.

This is now activated by default in the Kconfig so it should be save for us too.

Add to compat-3.0-stable

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>