drm/atomic: Rename drm_atomic_async_commit to nonblocking.

Another step in renaming async to nonblocking for atomic commit.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461679905-30177-3-git-send-email-maarten.lankhorst@linux.intel.com

drm/atomic: Rename async parameter to nonblocking.

This is the first step of renaming async commit to nonblocking commit.
The flag passed by userspace is NONBLOCKING, and async has a different
meaning for page flips, where it means as soon as possible.

Fixing up comments in drm core is done manually, to make sure I didn't
miss anything.

For drivers, the following cocci script is used to rename bool async to bool
nonblock:
@@
identifier I =~ "^async";
identifier func;
@@
func(..., bool
- I
+ nonblock
, ...)
{
<...
- I
+ nonblock
...>
}
@@
identifier func;
type T;
identifier I =~ "^async";
@@
T func(..., bool
- I
+ nonblock
, ...);

Thanks to Tvrtko Ursulin for the cocci script.

Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461679905-30177-2-git-send-email-maarten.lankhorst@linux.intel.com

drm/udl: Use drm_fb_helper deferred_io support

Use the fbdev deferred io support in drm_fb_helper.
The (struct fb_ops *)->fb_{fillrect,copyarea,imageblit} functions will
now schedule a worker instead of being flushed directly like it was
previously (recorded when in atomic).

This patch has only been compile tested.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461856717-6476-8-git-send-email-noralf@tronnes.org

drm/qxl: Use drm_fb_helper deferred_io support

Use the fbdev deferred io support in drm_fb_helper which mirrors the
one qxl has had.
This patch has only been compile tested.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461856717-6476-7-git-send-email-noralf@tronnes.org

drm/fb-cma-helper: Add fb_deferred_io support

This adds fbdev deferred io support if CONFIG_FB_DEFERRED_IO is enabled.
The driver has to provide a (struct drm_framebuffer_funcs *)->dirty()
callback to get notification of fbdev framebuffer changes.
If the dirty() hook is set, then fb_deferred_io is set up automatically
by the helper.

Two functions have been added so that the driver can provide a dirty()
function:
- drm_fbdev_cma_init_with_funcs()
  This makes it possible for the driver to provided a custom
  (struct drm_fb_helper_funcs *)->fb_probe() function.
- drm_fbdev_cma_create_with_funcs()
  This is used by the .fb_probe hook to set a driver provided
  (struct drm_framebuffer_funcs *)->dirty() function.

Cc: laurent.pinchart@ideasonboard.com
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461856717-6476-6-git-send-email-noralf@tronnes.org

fbdev: fb_defio: Export fb_deferred_io_mmap

Export fb_deferred_io_mmap so drivers can change vma->vm_page_prot.
When the framebuffer memory is allocated using dma_alloc_writecombine()
instead of vmalloc(), I get cache syncing problems on ARM.
This solves it:

static int drm_fbdev_cma_deferred_io_mmap(struct fb_info *info,
  struct vm_area_struct *vma)
{
fb_deferred_io_mmap(info, vma);
vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);

return 0;
}

Could this have been done in the core?
Drivers that don't set (struct fb_ops *)->fb_mmap, gets a call to
fb_pgprotect() at the end of the default fb_mmap implementation
(drivers/video/fbdev/core/fbmem.c). This is an architecture specific
function that on many platforms uses pgprot_writecombine(), but not on
all. And looking at some of the fb_mmap implementations, some of them
sets vm_page_prot to nocache for instance, so I think the safest bet is
to do this in the driver and not in the fbdev core. And we can't call
fb_pgprotect() from fb_deferred_io_mmap() either because we don't have
access to the file pointer that powerpc needs.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461856717-6476-5-git-send-email-noralf@tronnes.org

drm/fb-helper: Add fb_deferred_io support

This adds deferred io support to drm_fb_helper.
The fbdev framebuffer changes are flushed using the callback
(struct drm_framebuffer *)->funcs->dirty() by a dedicated worker
ensuring that it always runs in process context.

For those wondering why we need to be able to handle atomic calling
contexts: Both panic paths and cursor code and fbcon blanking can run
from atomic. See

commit bcb39af4486be07e896fc374a2336bad3104ae0a
Author: Dave Airlie <airlied@redhat.com>
Date:   Thu Feb 7 11:19:15 2013 +1000

    drm/udl: make usage as a console safer

for where this was originally discovered.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[danvet: Augment commit message with why we need to handle atomic
contexts.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461856717-6476-4-git-send-email-noralf@tronnes.org

drm/qxl: Change drm_fb_helper_sys_*() calls to sys_*()

Now that drm_fb_helper gets deferred io support, the
drm_fb_helper_sys_{fillrect,copyarea,imageblit} functions will schedule
a worker that will call the (struct drm_framebuffer *)->funcs->dirty()
function. This will break this driver so use the
sys_{fillrect,copyarea,imageblit} functions directly.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461856717-6476-3-git-send-email-noralf@tronnes.org

drm/udl: Change drm_fb_helper_sys_*() calls to sys_*()

Now that drm_fb_helper gets deferred io support, the
drm_fb_helper_sys_{fillrect,copyarea,imageblit} functions will schedule
a worker that will call the (struct drm_framebuffer *)->funcs->dirty()
function. This will break this driver so use the
sys_{fillrect,copyarea,imageblit} functions directly.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461856717-6476-2-git-send-email-noralf@tronnes.org

drm/atomic: Add missing drm_crtc_internal.h include

Some of the functions implemented are flagged as not having a prototype
defined when building with W=1. Include the header to avoid these build
warnings.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461849596-12819-1-git-send-email-thierry.reding@gmail.com

drm/dp: Allow signals to interrupt drm_aux-dev reads/writes

Let's be nice and interrupt the dpcd aux-dev reads/writes when there's
a signal pending. Much nicer if the user can hit ^C instead of having to
sit around waiting for the read/write to finish.

time dd if=/dev/drm_dp_aux0 bs=$((1024*1024))
^C

before:
 real 0m34.681s
 user 0m0.003s
 sys 0m6.880s

after:
 real 0m0.222s
 user 0m0.006s
 sys 0m0.057s

Cc: Rafael Antognolli <rafael.antognolli@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461786225-7790-1-git-send-email-ville.syrjala@linux.intel.com

drm: Quiet down drm_mode_getresources

The debug logging here can be very verbose in the kernel logs
and provides no information which userspace doesn't have the
access to already. Turn it off so kernel logs become more
manageable.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461755507-30453-1-git-send-email-tvrtko.ursulin@linux.intel.com

drm: Quiet down drm_mode_getconnector

Debug logging in this function does not provide any information
apart that the userspace is calling an ioctl on the connector.

There is not any info on the connector provided at all and
since there are other ioctls userspace typically calls which
do log useful things about the same connectors, remove this
one to make things a little bit more readable when KMS debugging
is turned on.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461751622-26927-10-git-send-email-tvrtko.ursulin@linux.intel.com

drm: Protect dev->filelist with its own mutex

amdgpu gained dev->struct_mutex usage, and that's because it's walking
the dev->filelist list. Protect that list with it's own lock to take
one more step towards getting rid of struct_mutex usage in drivers
once and for all.

While doing the conversion I noticed that 2 debugfs files in i915
completely lacked appropriate locking. Fix that up too.

v2: don't forget to switch to drm_gem_object_unreference_unlocked.

Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1461691808-12414-9-git-send-email-daniel.vetter@ffwll.ch

drm: Make drm_vm_open/close_locked private to drm_vm.c

It's only used for legacy mmaping support now.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1461691808-12414-8-git-send-email-daniel.vetter@ffwll.ch

drm: Hide master MAP cleanup in drm_bufs.c

And again make sure it's a no-op for modern drivers. Another case of
dev->struct_mutex gone for modern drivers!

Note that the entirety of the legacy addmap interface is now protected
by DRIVER_MODESET. Note that just auditing kernel code is not enough,
since userspace loves to set up legacy maps on it's own for various
things - with ums userspace and kernel space share control over
resources.

v2: Also add a DRIVER_* check like for all other maps functions to
really short-circuit the code. And give drm_legacy_rmmap used by the
dev unregister code the same treatment.

v3:
- remove redundant return; (Alex, Chris)
- don't special case nouveau with DRIVER_KMS_LEGACY_CONTEXT.

v4: Again special case nouveau. The problem is not directly in the
ddx, but that it calls dri1 functions from the X server. And those do
call drmAddMap. Fixed only in

    commit b1a630b48210d6a3c44994fce1b73273000ace5c
    Author: Dave Airlie <airlied@redhat.com>
    Date:   Wed Nov 7 14:45:14 2012 +1000

        nouveau: drop DRI1 device open interface.

Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1461741618-12679-1-git-send-email-daniel.vetter@ffwll.ch

drm: Forbid legacy MAP functions for DRIVER_MODESET

Like in

commit 0e975980d435d58df2d430d688b8c18778b42218
Author: Peter Antoine <peter.antoine@intel.com>
Date:   Tue Jun 23 08:18:49 2015 +0100

    drm: Turn off Legacy Context Functions

we need to again make an exception for nouveau, but everyone else
really doesn't need this.

Dave Airlie dug out again why we need this: The problem is the legacy
dri1 open function the nouveau ddx called, and the problematic code is
actually in the X server itself. It was only fixed in

commit b1a630b48210d6a3c44994fce1b73273000ace5c
Author: Dave Airlie <airlied@redhat.com>
Date:   Wed Nov 7 14:45:14 2012 +1000

    nouveau: drop DRI1 device open interface.

Cc: Peter Antoine <peter.antoine@intel.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1461691808-12414-5-git-send-email-daniel.vetter@ffwll.ch
Link: http://patchwork.freedesktop.org/patch/msgid/1461691808-12414-6-git-send-email-daniel.vetter@ffwll.ch

drm: Push struct_mutex into ->master_destroy

Only two drivers implement this hook. vmwgfx (which doesn't need it
really) and legacy radeon (which since v1 has been nuked, yay).

v1: Rebase over radeon ums removal.

Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Alex Deucher <alexdeucher@gmail.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1461691808-12414-6-git-send-email-daniel.vetter@ffwll.ch

drm: Move drm_getmap into drm_bufs.c and give it a legacy prefix

It belongs right next to the addmap and rmmap functions really. And
for OCD consistency name it drm_legacy_getmap_ioctl.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1461691808-12414-4-git-send-email-daniel.vetter@ffwll.ch

drm: Put legacy lastclose work into drm_legacy_dev_reinit

Except for the ->lasclose driver callback evrything in drm_lastclose()
is all legacy cruft and can be hidden. Which means another
dev->struct_mutex site disappears entirely for modern drivers!

Also while at it change the return value of drm_lastclose to void
since it will always succeed. No one checks the return value of
close() anyway, ever.

v2: Move misplaced hunk, spotted by 0day.

Cc: Thierry Reding <thierry.reding@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1461691808-12414-3-git-send-email-daniel.vetter@ffwll.ch

drm: Give drm_agp_clear drm_legacy_ prefix

It has a  DRIVER_MODESET check to sure make it's not creating havoc
for drm drivers. Make that clear in the name too.

v2: Move misplaced hunk, spotted by 0day and Thierry.

Cc: Thierry Reding <thierry.reding@gmail.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1461691808-12414-2-git-send-email-daniel.vetter@ffwll.ch

drm/sysfs: Annote lockless show functions with READ_ONCE

For documentation and paranoia.

Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1459331120-27864-4-git-send-email-daniel.vetter@ffwll.ch

MAINTAINERS: Update the files list for the GMA500 DRM driver

Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461279842-28695-5-git-send-email-emil.l.velikov@gmail.com

drm: rcar-du: Fix compilation warning

Commit d63c25e4245a ("drm: rcar-du: Use generic
drm_connector_register_all() helper") left an unused local variable
behind. Remove it.

Fixes: d63c25e4245a ("drm: rcar-du: Use generic drm_connector_register_all() helper")
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461336879-2469-1-git-send-email-laurent.pinchart+renesas@ideasonboard.com

drm/i915: Get rid of intel_dp_dpcd_read_wake()

Since we've fixed up drm_dp_dpcd_read() to allow for retries when things
timeout, there's no use for having this function anymore. Good riddens.

Signed-off-by: Lyude <cpaul@redhat.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1460559513-32280-5-git-send-email-cpaul@redhat.com

drm/dp_helper: Perform throw-away read before actual read in drm_dp_dpcd_read()

This is part of a patch series to migrate all of the workarounds for
commonly seen behavior from bad sinks in intel_dp_dpcd_read_wake() to drm's
DP helper.

Some sinks will just return garbage for the first aux tranaction they
receive when coming out of sleep mode, so we need to perform an additional
read before the actual read to workaround this.

    Changes since v5
- If the throwaway read in drm_dp_dpcd_read() fails, return the error
  from that instead of continuing. This follows the same logic we do in
  drm_dp_dpcd_access() (e.g. the error from the first transaction may
  differ from the errors that proceeding attempts might return).

Signed-off-by: Lyude <cpaul@redhat.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1460730335-5012-1-git-send-email-cpaul@redhat.com

drm/dp_helper: Retry aux transactions on all errors

This is part of a patch series to migrate all of the workarounds for
commonly seen behavior from bad sinks in intel_dp_dpcd_read_wake() to
drm's DP helper.

We cannot rely on sinks NACKing or deferring when they can't receive
transactions, nor can we rely on any other sort of consistent error to
know when we should stop retrying. As such, we need to just retry
unconditionally on errors. We also make sure here to return the error we
encountered during the first transaction, since it's possible that
retrying the transaction might return a different error then we had
originally.

This, along with the previous patch, work around a weird bug with the
ThinkPad T560's and it's dock. When resuming the laptop, it appears that
there's a short period of time where we're unable to complete any aux
transactions, as they all immediately timeout. The only machine I'm able
to reproduce this on is the T560 as other production Skylake models seem
to be fine. The period during which AUX transactions fail appears to be
around 22ms long. AFAIK, the dock for the T560 never actually turns off,
the only difference is that it's in SST mode at the start of the resume
process, so it's unclear as to why it would need so much time to come
back up.

There's been a discussion on this issue going on for a while on the
intel-gfx mailing list about this that has, in addition to including
developers from Intel, also had the correspondence of one of the
hardware engineers for Intel:

http://www.spinics.net/lists/intel-gfx/msg88831.html
http://www.spinics.net/lists/intel-gfx/msg88410.html

We've already looked into a couple of possible explanations for the
problem:

- Calling intel_dp_mst_resume() before right fix.
  intel_runtime_pm_enable_interrupts(). This was the first fix I tried,
  and while it worked it definitely wasn't the right fix. This worked
  because DP aux transactions don't actually require interrupts to work:

static uint32_t
intel_dp_aux_wait_done(struct intel_dp *intel_dp, bool has_aux_irq)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
i915_reg_t ch_ctl = intel_dp->aux_ch_ctl_reg;
uint32_t status;
bool done;

#define C (((status = I915_READ_NOTRACE(ch_ctl)) & DP_AUX_CH_CTL_SEND_BUSY) == 0)
if (has_aux_irq)
done = wait_event_timeout(dev_priv->gmbus_wait_queue, C,
  msecs_to_jiffies_timeout(10));
else
done = wait_for_atomic(C, 10) == 0;
if (!done)
DRM_ERROR("dp aux hw did not signal timeout (has irq: %i)!\n",
  has_aux_irq);
#undef C

return status;
}

  When there's no interrupts enabled, we end up timing out on the
  wait_event_timeout() call, which causes us to check the DP status
  register once to see if the transaction was successful or not. Since
  this adds a 10ms delay to each aux transaction, it ends up adding a
  long enough delay to the resume process for aux transactions to become
  functional again. This gave us the illusion that enabling interrupts
  had something to do with making things work again, and put me on the
  wrong track for a while.

- Interrupts occurring when we try to perform the aux transactions
  required to put the dock back into MST mode. This isn't the problem,
  as the only interrupts I've observed that come during this timeout
  period are from the snd_hda_intel driver, and disabling that driver
  doesn't appear to change the behavior at all.

- Skylake's PSR block causing issues by performing aux transactions
  while we try to bring the dock out of MST mode. Disabling PSR through
  i915's command line options doesn't seem to change the behavior
  either, nor does preventing the DMC firmware from being loaded.

Since this investigation went on for about 2 weeks, we decided it would
be better for the time being to just workaround this issue by making
sure AUX transactions wait a short period of time before retrying.

Signed-off-by: Lyude <cpaul@redhat.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1460559513-32280-3-git-send-email-cpaul@redhat.com

drm/dp_helper: Always wait before retrying native aux transactions

This is part of a patch series to migrate all of the workarounds for
commonly seen behavior from bad sinks in intel_dp_dpcd_read_wake() to
drm's DP helper.

Some sinks need some time during the process of resuming the system from
sleep before they're ready to handle transactions. While it would be
nice if they responded with NACKs in these scenarios, this isn't always
the case as a few sinks will just timeout on all of the transactions
they receive until they're ready.

Signed-off-by: Lyude <cpaul@redhat.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1460559513-32280-2-git-send-email-cpaul@redhat.com

drm/modes: stop handling framebuffer special

Since ref counting is in the object now we can just call the
normal interfaces.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/modes: reduce fb_lock to just protecting lists

This reduces the fb_lock to just protecting the num_fb/fb_list.

"Previously fb refcounting, and especially the weak reference
(kref_get_unless_zero) used in fb lookups have been protected by fb_lock.
But with the refactoring to share refcounting in the drm_mode_object base
class that switched to being protected by idr_mutex, which means fb_lock
critical sections can be reduced."

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/modes: move reference taking into object lookup.

When we lookup an ref counted object we now take a proper reference
using kref_get_unless_zero.

Framebuffer lookup no longer needs do this itself.

Convert rmfb to using framebuffer lookup and deal with the fact
it now gets an extra reference that we have to cleanup. This should
mean we can avoid holding fb_lock across rmfb. (if I'm wrong let me
know).

We also now only hold the fbs_lock around the list manipulation.

"Previously fb refcounting, and especially the weak reference
(kref_get_unless_zero) used in fb lookups have been protected by fb_lock.
But with the refactoring to share refcounting in the drm_mode_object base
class that switched to being protected by idr_mutex, which means fb_lock
critical sections can be reduced."

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/mode: reduce lock hold in addfb2

No need to hold the lock while assigning the variable.

Daniel wrote:
"Not sure why exactly I put that under the lock, but the only thing that
can race here is rmfb while addfb2 is still doing it's thing, with a
correctly guess (easy to do since they're fully deterministic) fb_id."

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/mode: reduce scope of fb_lock in framebuffer init

We don't need to hold the fb lock around the initialisation,
only around the list manipulaton.

So do the lock hold only around the register for now.

From Daniel:
Previously fb refcounting, and especially the weak reference
(kref_get_unless_zero) used in fb lookups have been protected by fb_lock.
But with the refactoring to share refcounting in the drm_mode_object base
class that switched to being protected by idr_mutex, which means fb_lock
critical sections can be reduced.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/mode: use _object_find to find framebuffers.

No point have this code dupliated at this point, use the
_object_find code instead now.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/mode: move framebuffer reference into object.

This is the initial code to add references to some mode objects.
In the future we need to start reference counting connectors so
firstly I want to reorganise the code so the framebuffer ref counting
uses the same paths.

This patch shouldn't change any functionality, just moves the kref.

[airlied: move kerneldoc as well]
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/mode: introduce wrapper to read framebuffer refcount.

Avoids drivers knowing where the kref is stored.

[airlied: add kerneldoc]
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/modes: drop __drm_framebuffer_unregister.

Just use the generic function.

The main side effect of this is that the fb->base.id
is now protected by the idr mutex as well.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/mode: move framebuffer_free up above framebuffer_init

A later patch will use it in framebuffer_init, and I want
to keep the diff cleaner.

Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/mode: rework drm_mode_object_put to drm_mode_object_unregister.

This changes the code to handle being called multiple times without
side effects. The new names seems more suitable for what it does.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge branch 'drm-atmel-hlcdc-devel' of https://github.com/bbrezillon/linux-at91 into drm-next

This PR contains several improvement and cleanup patches for the
atmel-hlcdc driver to be applied on drm-next (targeting 4.7).

* 'drm-atmel-hlcdc-devel' of https://github.com/bbrezillon/linux-at91:
  drm: atmel-hlcdc: route DMA accesses through AHB interfaces
  drm: atmel-hlcdc: check display mode validity in crtc->mode_fixup()
  drm: atmel-hlcdc: rework the output code to support drm bridges
  drm: atmel-hlcdc: move output mode selection in CRTC implementation
  drm: atmel-hlcdc: support extended timing ranges on sama5d4 and sama5d2
  drm: atmel-hlcdc: remove leftovers from atomic mode setting migration
  drm: atmel-hlcdc: fix connector and encoder types
  drm: atmel-hlcdc: support asynchronous atomic commit operations
  drm: atmel-hlcdc: add a ->cleanup_fb() operation

Merge tag 'drm-intel-next-2016-04-11' of git://anongit.freedesktop.org/drm-intel into drm-next

- make modeset hw state checker atomic aware (Maarten)
- close races in gpu stuck detection/seqno reading (Chris)
- tons&tons of small improvements from Chris Wilson all over the gem code
- more dsi/bxt work from Ramalingam&Jani
- macro polish from Joonas
- guc fw loading fixes (Arun&Dave)
- vmap notifier (acked by Andrew) + i915 support by Chris Wilson
- create bottom half for execlist irq processing (Chris Wilson)
- vlv/chv pll cleanup (Ville)
- rework DP detection, especially sink detection (Shubhangi Shrivastava)
- make color manager support fully atomic (Maarten)
- avoid livelock on chv in execlist irq handler (Chris)

* tag 'drm-intel-next-2016-04-11' of git://anongit.freedesktop.org/drm-intel: (82 commits)
  drm/i915: Update DRIVER_DATE to 20160411
  drm/i915: Avoid allocating a vmap arena for a single page
  drm,i915: Introduce drm_malloc_gfp()
  drm/i915/shrinker: Restrict vmap purge to objects with vmaps
  drm/i915: Refactor duplicate object vmap functions
  drm/i915: Consolidate common error handling in intel_pin_and_map_ringbuffer_obj
  drm/i915/dmabuf: Tighten struct_mutex for unmap_dma_buf
  drm/i915: implement WaClearTdlStateAckDirtyBits
  drm/i915/bxt: Reversed polarity of PORT_PLL_REF_SEL bit
  drm/i915: Rename hw state checker to hw state verifier.
  drm/i915: Move modeset state verifier calls.
  drm/i915: Make modeset state verifier take crtc as argument.
  drm/i915: Replace manual barrier() with READ_ONCE() in HWS accessor
  drm/i915: Use simplest form for flushing the single cacheline in the HWS
  drm/i915: Harden detection of missed interrupts
  drm/i915: Separate out the seqno-barrier from engine->get_seqno
  drm/i915: Remove forcewake dance from seqno/irq barrier on legacy gen6+
  drm/i915: Fixup the free space logic in ring_prepare
  drm/i915: Simplify check for idleness in hangcheck
  drm/i915: Apply a mb between emitting the request and hangcheck
  ...

Merge tag 'v4.6-rc3' into drm-next

Backmerge 4.6-rc3 for i915.

Linux 4.6-rc3

Merge tag 'topic/drm-misc-2016-04-21' of git://anongit.freedesktop.org/drm-intel into drm-next

misc pull req all over. Biggest thing is the
drm_connector_(un)register_all cleanup from Alexey for drivers without the
load/unload midlayer hooks. I.e. all the new ones, and a bunch of the
pending new atomic drivers depend upon this. Or at least I asked them to
rebase ;-)

* tag 'topic/drm-misc-2016-04-21' of git://anongit.freedesktop.org/drm-intel:
  drm: Make drm.debug parameter description more helpful
  drm: Remove warning from drm_connector_unregister_all()
  drm: probe_helper: Hide ugly ifdef
  drm: rcar-du: Use generic drm_connector_register_all() helper
  drm: atmel_hldc: Use generic drm_connector_register_all() helper
  drm: Introduce drm_connector_register_all() helper
  drm: fix lut value extraction function
  drm/atomic-helper: Print an error if vblank wait times out
  drm/dp/mst: Restore primary hub guid on resume
  drm: Release driver references to handle before making it available again
  drm/i915/dp/mst: Add source port info to debugfs output
  drm/dp/mst: Enhance DP MST debugfs output
  drm/edid: Add drm_edid_get_monitor_name()
  include/drm: Reword debug categories comment.
  drm/crtc_helper: Reset empty plane state in drm_helper_crtc_mode_set_base()
  drm/virtio: Drop dummy gamma table support
  drm/bochs: Drop fake gamma support
  drm/core: Fix ordering in drm_mode_config_cleanup.

Merge tag 'topic/struct_mutex-2016-04-21' of git://anongit.freedesktop.org/drm-intel into drm-next

struct_mutex cleanups and error paths fixes. Unfortunately I didn't manage
to get acks from everyone, but this stuff has been hanging out for months
now and imo simple enough to just land the remaining few patches. But
separate pull request so that you can take a look yourself.

* tag 'topic/struct_mutex-2016-04-21' of git://anongit.freedesktop.org/drm-intel:
  drm/vma_manage: Drop has_offset
  drm/vgem: Drop dev->struct_mutex
  drm/vgem: Move get_pages to gem_create
  drm/vgem: Simplify dumb_map
  drm/exynos: drop struct_mutex from fbdev setup
  drm/exynos: drop struct_mutex from exynos_drm_gem_get_ioctl
  drm/exynos: drop struct_mutex from exynos_gem_map_sgt_with_dma
  drm/exynos: Drop dev->struct_mutex from mmap offset function
  drm/nouveau: Drop dev->struct_mutex from fbdev init
  drm/qxl: Use unlocked gem unreferencing
  drm/omapdrm: Use unlocked gem unreferencing
  drm/nouveau: Use unlocked gem unreferencing

drm: Make drm.debug parameter description more helpful

Let's be user-friendly and print an actually helpful parameter
description.

This makes modinfo output the debug parameter like this:

parm:           debug:Enable debug output, where each bit enables a debug category.
Bit 0 (0x01) will enable CORE messages (drm core code)
Bit 1 (0x02) will enable DRIVER messages (drm controller code)
Bit 2 (0x04) will enable KMS messages (modesetting code)
Bit 3 (0x08) will enable PRIME messages (prime code)
Bit 4 (0x10) will enable ATOMIC messages (atomic code)
Bit 5 (0x20) will enable VBL messages (vblank code) (int)

Changes from v1:

  * Fixed s/PRMIE/PRIME typo.
  * Add ATOMIC and VBL debug parameter documentation.
  * Prefix the continuation lines with two tabs and
    removed the last new line.
  * Remove spurious whitespace.

Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461170703-11216-1-git-send-email-ezequiel@vanguardiasur.com.ar

drm: Remove warning from drm_connector_unregister_all()

Commit 6c87e5c3ec6d ("drm: Rename drm_connector_unplug_all() to
drm_connector_unregister_all()") replaced a manual connectors list walk
in drm_connector_unregister_all() with drm_for_each_connector(). The
list was walked without the mode config mutex locked as that ends up in
a clash with sysfs, but drm_connector_unregister_all() warns when the
mutex isn't locked.

The problem is known and doesn't require a large warning every time
drm_connector_unregister_all() is called. Fix it by reverting to manual
list walk.

Fixes: 6c87e5c3ec6d ("drm: Rename drm_connector_unplug_all() to drm_connector_unregister_all()")
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461190874-32674-1-git-send-email-laurent.pinchart+renesas@ideasonboard.com

drm: probe_helper: Hide ugly ifdef

Push the ifdef to the drm_edid.h and create a stub, for the
DRM_LOAD_EDID_FIRMWARE=n case. This removes some clutter in
the code, making it more readable.

Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461087638-16959-1-git-send-email-ezequiel@vanguardiasur.com.ar

drm: rcar-du: Use generic drm_connector_register_all() helper

Now that a generic drm_connector_register_all() helper exists we may safely
substitute it for the driver-specific implementation of connectors plugging
in sysfs.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: linux-renesas-soc@vger.kernel.org
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461068693-11260-4-git-send-email-abrodkin@synopsys.com

drm: atmel_hldc: Use generic drm_connector_register_all() helper

This driver used to have its own implementation of connector_register_all()
which actually was taken as a prototype of drm_connector_register_all().

Now when drm_connector_register_all() exists reusing it here.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461068693-11260-3-git-send-email-abrodkin@synopsys.com

drm: Introduce drm_connector_register_all() helper

As a pair to already existing drm_connector_unregister_all() we're adding
generic implementation of what is already done in some drivers.

Once this helper is implemented we'll be ready to switch existing
driver-specific implementations with the generic one.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461068693-11260-2-git-send-email-abrodkin@synopsys.com

drm/vma_manage: Drop has_offset

It's racy, creating mmap offsets is a slowpath, so better to remove it
to avoid drivers doing broken things.

The only user is i915, and it's ok there because everything (well
almost) is protected by dev->struct_mutex in i915-gem.

While at it add a note in the create_mmap_offset kerneldoc that
drivers must release it again. And then I also noticed that
drm_gem_object_release entirely lacks kerneldoc.

Cc: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1459330852-27668-14-git-send-email-daniel.vetter@ffwll.ch

drm/vgem: Drop dev->struct_mutex

With the previous two changes it doesn't protect anything any more.

v2: Use _unlocked unreference variant.

v3: Appease gcc noise.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1459330852-27668-13-git-send-email-daniel.vetter@ffwll.ch

drm/vgem: Move get_pages to gem_create

vgem doesn't have a shrinker or anything like that and drops backing
storage only at object_free time. There's no use in trying to be
clever and allocating backing storage delayed, it only causes trouble
by requiring locking.

Instead grab pages when we allocate the object right away.

v2: Fix compiling.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1459330852-27668-12-git-send-email-daniel.vetter@ffwll.ch

drm/vgem: Simplify dumb_map

The offset manager already checks for existing offsets internally,
while holding suitable locks. We can drop this check.

v2: Fix title (Emil).

Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1459330852-27668-11-git-send-email-daniel.vetter@ffwll.ch

drm/exynos: drop struct_mutex from fbdev setup

Doesn't protect anything at all, and probably just here because a long
time ago dev->struct_mutex was required to allocate gem objects.

With this patch exynos is completely struct_mutex free!

Cc: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1459330852-27668-10-git-send-email-daniel.vetter@ffwll.ch

drm/exynos: drop struct_mutex from exynos_drm_gem_get_ioctl

The only things this protects is reading ->flags and ->size, both of
which are invariant over the lifetime of an exynos gem bo. So no
locking needed at all (besides that, nothing protects the writers
anyway).

Aside: exynos_gem_obj->size is redundant with
exynos_gem_obj->base.size and probably should be removed.

v2: Use _unlocked unreference (Daniel Stone).

Cc: Daniel Stone <daniel@fooishbar.org>
Cc: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1459330852-27668-9-git-send-email-daniel.vetter@ffwll.ch

drm/exynos: drop struct_mutex from exynos_gem_map_sgt_with_dma

The sg table isn't refcounted, there's no corresponding locking for
unmapping and drm_map_sg is ok with being called concurrently.

So drop the locking since it doesn't protect anything.

Cc: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1459330852-27668-8-git-send-email-daniel.vetter@ffwll.ch

drm/exynos: Drop dev->struct_mutex from mmap offset function

Simply forgotten about this when I was doing my general cleansing of
simple gem mmap offset functions. There's nothing but core functions
called here, and they all have their own protection already.

Aside: DRM_ERROR for userspace controlled input isn't great, but
that's for another patch.

v2: Use _unlocked unreference (Daniel Stone).

Cc: Daniel Stone <daniel@fooishbar.org>
Cc: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1459330852-27668-7-git-send-email-daniel.vetter@ffwll.ch

drm/nouveau: Drop dev->struct_mutex from fbdev init

Doesn't protect anything at all.

With this patch nouveau is completely dev->struct_mutex free!

Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1459330852-27668-6-git-send-email-daniel.vetter@ffwll.ch

drm/qxl: Use unlocked gem unreferencing

For drm_gem_object_unreference callers are required to hold
dev->struct_mutex, which these paths don't. Enforcing this requirement
has become a bit more strict with

commit ef4c6270bf2867e2f8032e9614d1a8cfc6c71663
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Thu Oct 15 09:36:25 2015 +0200

    drm/gem: Check locking in drm_gem_object_unreference

Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1459330852-27668-4-git-send-email-daniel.vetter@ffwll.ch
Link: http://patchwork.freedesktop.org/patch/msgid/1459330852-27668-5-git-send-email-daniel.vetter@ffwll.ch

drm/omapdrm: Use unlocked gem unreferencing

For drm_gem_object_unreference callers are required to hold
dev->struct_mutex, which these paths don't. Enforcing this requirement
has become a bit more strict with

commit ef4c6270bf2867e2f8032e9614d1a8cfc6c71663
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Thu Oct 15 09:36:25 2015 +0200

    drm/gem: Check locking in drm_gem_object_unreference

Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1459330852-27668-3-git-send-email-daniel.vetter@ffwll.ch

drm/nouveau: Use unlocked gem unreferencing

For drm_gem_object_unreference callers are required to hold
dev->struct_mutex, which these paths don't. Enforcing this requirement
has become a bit more strict with

commit ef4c6270bf2867e2f8032e9614d1a8cfc6c71663
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Thu Oct 15 09:36:25 2015 +0200

    drm/gem: Check locking in drm_gem_object_unreference

Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1459330852-27668-2-git-send-email-daniel.vetter@ffwll.ch

drm: fix lut value extraction function

When extracting the value at full precision (16 bits), no need to
round the value.

This was spotted by Jani when running sparse. Unfortunately this fix
doesn't get rid of the warning.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reported-by: Jani Nikula <jani.nikula@intel.com>
Cc: Daniel Stone <daniels@collabora.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: dri-devel@lists.freedesktop.org
Fixes: 5488dc16fde7 ("drm: introduce pipe color correction properties")
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1458655833-19547-1-git-send-email-lionel.g.landwerlin@intel.com

drm/atomic-helper: Print an error if vblank wait times out

Vblank waits timing out is no a normal thing to happen, so let's inform
people when it happens.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1460978973-24945-2-git-send-email-ville.syrjala@linux.intel.com

drm/dp/mst: Restore primary hub guid on resume

Some hubs are forgetful, and end up forgetting whatever GUID we set
previously after we do a suspend/resume cycle. This can lead to
hotplugging breaking (along with probably other things) since the hub
will start sending connection notifications with the wrong GUID. As
such, we need to check on resume whether or not the GUID the hub is
giving us is valid.

Signed-off-by: Lyude <cpaul@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1460580618-7421-1-git-send-email-cpaul@redhat.com

drm: Release driver references to handle before making it available again

When userspace closes a handle, we remove it from the file->object_idr
and then tell the driver to drop its references to that file/handle.
However, as the file/handle is already available again for reuse, it may
be reallocated back to userspace and active on a new object before the
driver has had a chance to drop the old file/handle references.

Whilst calling back into the driver, we have to drop the
file->table_lock spinlock and so to prevent reusing the closed handle we
mark that handle as stale in the idr, perform the callback and then
remove the handle. We set the stale handle to point to the NULL object,
then any idr_find() whilst the driver is removing the handle will return
NULL, just as if the handle is already removed from idr.

Note: This will be used to have a direct handle -> vma lookup table,
instead of first a handle -> obj lookup, and then an (obj, vm) -> vma
lookup.

v2: Use NULL rather than an ERR_PTR to avoid having to adjust callers.
idr_alloc() tracks existing handles using an internal bitmap, so we are
free to use the NULL object as our stale identifier.
v3: Needed to update the return value check after changing from using
the stale error pointer to NULL.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: dri-devel@lists.freedesktop.org
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Thierry Reding <treding@nvidia.com>
[danvet: Add note about the use-case.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1460721308-32405-1-git-send-email-chris@chris-wilson.co.uk

drm/i915/dp/mst: Add source port info to debugfs output

Modify the debugfs output for i915_dp_mst_info to list the source port for
the DP MST topology in question.

v2: rebase
v3: rebase
v4: rebase

cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jim Bride <jim.bride@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1460654317-31288-3-git-send-email-jim.bride@linux.intel.com

drm/dp/mst: Enhance DP MST debugfs output

Add some additional information (input vs. output port, sink associated
with VC, peer device type, max number of VCs supported) and ensure that
any embedded '\0' characters in a branch device's devid string are not
written to debugfs.

v2: Rebase + change drm_edid_get_monitor_name() call to reflect new
    signature.

v3: Minor changes suggested by Jani + rebase.

v4: Rebase

cc: dri-devel@lists.freedesktop.org
cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jim Bride <jim.bride@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1460654317-31288-2-git-send-email-jim.bride@linux.intel.com

drm/edid: Add drm_edid_get_monitor_name()

In order to include monitor name information in debugfs
output we needed to add a function that would extract the
monitor name from the EDID, and that function needed to
reside in the file  where the rest of the EDID helper
functions are implemented.

v2: Refactor to have drm_edid_get_monitor_name() and drm_edid_to_eld()
    use a common helper function to extract the monitor name from the
    edid. [Jani] + rebase.

v3: Minor changes suggested by Jani + rebase.

v4: Few more minor changes suggested by Jani + rebase.

cc: dri-devel@lists.freedesktop.org
cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jim Bride <jim.bride@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1460654317-31288-1-git-send-email-jim.bride@linux.intel.com

include/drm: Reword debug categories comment.

The debug category comment mentions 4 categories, but
more than 4 categories are listed. Let's change the
wording to something a bit more generic.

Signed-off-by: Robert Foss <robert.foss@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1460644456-9752-1-git-send-email-robert.foss@collabora.com

drm: atmel-hlcdc: route DMA accesses through AHB interfaces

In relation with the actuall bandwidth consumed on a DMA Source interface,
choose the less used one for a created plane.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Tested-by: Nicolas Ferre <nicolas.ferre@atmel.com>

drm: atmel-hlcdc: check display mode validity in crtc->mode_fixup()

Move the adjusted display mode check into ->mode_fixup().

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Tested-by: Nicolas Ferre <nicolas.ferre@atmel.com>

drm: atmel-hlcdc: rework the output code to support drm bridges

The current output code only supports connection to drm panels.
First simplify the drm panel code, and then add support for external drm
bridges.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Tested-by: Nicolas Ferre <nicolas.ferre@atmel.com>

drm: atmel-hlcdc: move output mode selection in CRTC implementation

In order to support multiple outputs we need to move the output mode
selection to the CRTC object, so that the output validity check can be
done against the drm_atomic_state.

If the connectors selected by a specific mode setting are requiring
incompatible bus format the atomic operation is aborted (->atomic_check()
returns -EINVAL).

In order to implement that, we need to define our own CRTC state and
overload default ->reset(), ->atomic_duplicate_state() and
->atomic_destroy_state() functions.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Tested-by: Nicolas Ferre <nicolas.ferre@atmel.com>

drm: atmel-hlcdc: support extended timing ranges on sama5d4 and sama5d2

The display timings on old SoCs older than the sama5d4 are quite limited
and prevent the use of many displays. Add support for extended timing
ranges on sama5d2 and sama5d4.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Tested-by: Nicolas Ferre <nicolas.ferre@atmel.com>

drm: atmel-hlcdc: remove leftovers from atomic mode setting migration

The ->dpms field is no longer used and can be removed.
The same goes for the dummy ->mode_fixup() implementation which always
returns true.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Tested-by: Nicolas Ferre <nicolas.ferre@atmel.com>

drm: atmel-hlcdc: fix connector and encoder types

The hlcdc IP keep the pixel stream in raw RGB mode, and does not provide
any specific connector. Since DRM_MODE_CONNECTOR_RAW_RGB does not exist,
use DRM_MODE_CONNECTOR_Unknown.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Tested-by: Nicolas Ferre <nicolas.ferre@atmel.com>

drm: atmel-hlcdc: support asynchronous atomic commit operations

drm_atomic_helper_commit() does not support asynchronous commits.
Replace it by a specific commit function supporting these kind of requests.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Tested-by: Nicolas Ferre <nicolas.ferre@atmel.com>

drm: atmel-hlcdc: add a ->cleanup_fb() operation

Add a ->cleanup_fb() operation to avoid memory leaks when the atomic
operation is interrupted after the ->prepare_fb() call.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Fixes 2389fc1 ("drm: atmel-hlcdc: Atomic mode-setting conversion")
Reviewed-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Tested-by: Nicolas Ferre <nicolas.ferre@atmel.com>

drm/crtc_helper: Reset empty plane state in drm_helper_crtc_mode_set_base()

Transitional drivers might access the NULL pointer plane->state in
drm_helper_crtc_mode_set_base(), which causes NULL pointer dereference.
So, let's reset it before handing it over to those drivers.
commit e4f31ad2b713 ("drm: reset empty state in transitional helpers")
did the same thing for other transitional helpers, but it seems this one
was missed.

Signed-off-by: Liu Ying <gnuiyl@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1459846239-8946-1-git-send-email-gnuiyl@gmail.com

Merge branch 'gma500-next' of git://github.com/patjak/drm-gma500 into drm-next

A few fixes and cleanups for 4.7 that's been collecting dust in my
inbox for a while.

* 'gma500-next' of git://github.com/patjak/drm-gma500:
  drm/gma500/mdfld_dsi: remove bogus if check
  drm/gma500: Fix possible out of bounds read
  drm/gma500: fix double freeing

drm/virtio: Drop dummy gamma table support

No need to confuse userspace like this.

Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1459331485-28376-8-git-send-email-daniel.vetter@ffwll.ch

drm/bochs: Drop fake gamma support

Only really needed for fbdev emulation at 8bpp. And bochs doesn't do
that. And either way bochs only does 32bit rgb, so this is all pretty
much wasted dead code.

The only consideration is that we need to not set up any gamma size
either.

Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1459331485-28376-5-git-send-email-daniel.vetter@ffwll.ch

drm/core: Fix ordering in drm_mode_config_cleanup.

__drm_atomic_helper_plane_destroy_state calls
drm_framebuffer_unreference, which means that if drm_framebuffer_free
is called before plane->destroy freed memory will be accessed.

A similar case happens for the blob list, which was freed before the
crtc state was, resulting in the unreference_blob from crtc_destroy_state
pointing to garbage memory causing another opportunity for a GPF.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1458657734-21866-1-git-send-email-maarten.lankhorst@linux.intel.com

drm/i915: Update DRIVER_DATE to 20160411

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Merge tag 'v4.6-rc3' into drm-intel-next-queued

Linux 4.6-rc3

Backmerge requested by Chris Wilson to make his patches apply cleanly.
Tiny conflict in vmalloc.c with the (properly acked and all) patch in
drm-intel-next:

commit 4da56b99d99e5a7df2b7f11e87bfea935f909732
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Mon Apr 4 14:46:42 2016 +0100

    mm/vmap: Add a notifier for when we run out of vmap address space

and Linus' tree.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

drm/i915: Avoid allocating a vmap arena for a single page

If we want a contiguous mapping of a single page sized object, we can
forgo using vmap() and just use a regular kmap(). Note that this is only
suitable if the desired pgprot_t is compatible.

v2: Use is_vmalloc_addr()

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Dave Gordon <david.s.gordon@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1460113874-17366-7-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>

drm,i915: Introduce drm_malloc_gfp()

I have instances where I want to use drm_malloc_ab() but with a custom
gfp mask. And with those, where I want a temporary allocation, I want to
try a high-order kmalloc() before using a vmalloc().

So refactor my usage into drm_malloc_gfp().

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: dri-devel@lists.freedesktop.org
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1460113874-17366-6-git-send-email-chris@chris-wilson.co.uk

drm/i915/shrinker: Restrict vmap purge to objects with vmaps

When called because we have run out of vmap address space, we only need
to recover objects that have vmappings and not all.

v2: Start using is_vmalloc_addr()

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1460113874-17366-5-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>

drm/i915: Refactor duplicate object vmap functions

We now have two implementations for vmapping a whole object, one for
dma-buf and one for the ringbuffer. If we couple the mapping into the
obj->pages lifetime, then we can reuse an obj->mapping for both and at
the same time couple it into the shrinker. There is a third vmapping
routine in the cmdparser that maps only a range within the object, for
the time being that is left alone, but will eventually use these routines
in order to cache the mapping between invocations.

v2: Mark the failable kmalloc() as __GFP_NOWARN (vsyrjala)
v3: Call unpin_vmap from the right dmabuf unmapper

v4: Rename vmap to map as we don't wish to imply the type of mapping
involved, just that it contiguously maps the object into kernel space.
Add kerneldoc and lockdep annotations

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Dave Gordon <david.s.gordon@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1460113874-17366-4-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>

drm/i915: Consolidate common error handling in intel_pin_and_map_ringbuffer_obj

After we pin the ringbuffer into the GGTT, all error paths need to unpin
it again. Move this common step into one block, and make the unable to
iomap error code consistent (i.e. treat it as out of memory to avoid
confusing it with a invalid argument).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1460113874-17366-3-git-send-email-chris@chris-wilson.co.uk

drm/i915/dmabuf: Tighten struct_mutex for unmap_dma_buf

We only need the struct_mutex to manipulate the pages_pin_count on the
object, we do not need to hold our BKL when freeing the exported
scatterlist.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1460113874-17366-2-git-send-email-chris@chris-wilson.co.uk

drm/i915: implement WaClearTdlStateAckDirtyBits

This is to fix a GPU hang seen with mid thread pre-emption
and pooled EUs.

v2. Use IS_BXT_REVID instead of IS_BROXTON and INTEL_REVID

v3. And use correct type for register addresses

Signed-off-by: Tim Gore <tim.gore@intel.com>
Reviewed-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1458571049-854-1-git-send-email-tim.gore@intel.com

drm/i915/bxt: Reversed polarity of PORT_PLL_REF_SEL bit

For BXT, description of polarities of PORT_PLL_REF_SEL
has been reversed for newer Gen9LP steppings according to the
recent update in Bspec. This bit now should be set for
"Non-SSC" mode for all Gen9LP starting from B0 stepping.

v2: Only B0 and newer stepping should be affected by this
change.

Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94866
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1458176773-26925-1-git-send-email-dongwon.kim@intel.com

drm/i915: Rename hw state checker to hw state verifier.

Check functions are used by atomic to see if the new state will
be allowed. There's also a hw state checker which checks afterwards
that the committed state is correct. Rename it to hw state verifier
to reduce some confusion.

Suggested-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/56FB8785.8020506@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>

drm/i915: Move modeset state verifier calls.

The modeset state verifier no longer has full access to the hardware,
instead it should only verify affected crtc's.

Looking for disabled stuff can be verified immediately after all crtc
disables have completed, while each enabled crtc can be verified right
after being enabled.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1458741487-23801-3-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
[mlankhorst: check -> verify]

drm/i915: Make modeset state verifier take crtc as argument.

This will make it easier to keep the crtc checker when atomic
commit is reworked for asynchronous commits. This prevents checking
crtc's that were not part of the state. It's safe to verify disabled
encoders, connectors and dpll's that are not part of the state,
because during modeset connection_mutex is held.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1458741487-23801-2-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
[mlankhorst: Extend commit message and rename check to verify.]

Linux 4.6-rc3

Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm

Pull ARM fixes from Russell King:
 "A couple of small fixes, and wiring up the new syscalls which appeared
  during the merge window"

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: 8550/1: protect idiv patching against undefined gcc behavior
  ARM: wire up preadv2 and pwritev2 syscalls
  ARM: SMP enable of cache maintanence broadcast

Merge tag 'mmc-v4.6-rc1' of git://git.linaro.org/people/ulf.hansson/mmc

Pull MMC fixes from Ulf Hansson:
 "Here are a couple of mmc fixes intended for v4.6 rc3:

  MMC host:
   - sdhci: Fix regression setting power on Trats2 board
   - sdhci-pci: Add support and PCI IDs for more Broxton host controllers"

* tag 'mmc-v4.6-rc1' of git://git.linaro.org/people/ulf.hansson/mmc:
  mmc: sdhci-pci: Add support and PCI IDs for more Broxton host controllers
  mmc: sdhci: Fix regression setting power on Trats2 board