matt mooney [Fri, 6 May 2011 10:47:41 +0000 (03:47 -0700)]
staging: usbip: stub_dev.c: coding style cleanup
Fix alignment for consistency and remove extraneous lines.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Guilherme Salazar [Wed, 4 May 2011 04:38:30 +0000 (01:38 -0300)]
Staging: brcm80211: fix brace coding style issue in dhd_cdc.c
This is a patch that fixes up a brace issue found by the checkpatch.pl
tool
Signed-off-by: Guilherme Salazar <salazartux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vasanthakumar Thiagarajan [Wed, 4 May 2011 08:53:56 +0000 (14:23 +0530)]
ath6kl: Remove ununsed macros from gpio_reg.h
After this there is no difference between hw2.0/hw/gpio_reg.h
and hw4.0/hw/gpio_reg.h, so remove the duplication.
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vasanthakumar Thiagarajan [Wed, 4 May 2011 08:53:55 +0000 (14:23 +0530)]
ath6kl: Remove gpio.h and gpio_api.h
The macros and function proto types in these files are
not used anywhere.
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vasanthakumar Thiagarajan [Wed, 4 May 2011 08:53:54 +0000 (14:23 +0530)]
ath6kl: Remove unused eeprom.c
Also delete si_reg.h which is only used in eeprom.c
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vasanthakumar Thiagarajan [Wed, 4 May 2011 08:53:53 +0000 (14:23 +0530)]
ath6kl: Remove dead code with CONFIG_AR6002_REV1_FORCE_HOST
This is not defined anywhere, also delete vmc_reg.h which is
used only in the dead code.
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vasanthakumar Thiagarajan [Wed, 4 May 2011 08:53:52 +0000 (14:23 +0530)]
ath6kl: Remove somemore unused header files
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Cox [Fri, 6 May 2011 15:48:27 +0000 (16:48 +0100)]
gma500: The MID devices have the register offset different
This is another small step towards getting Moorestown/Oaktrail support to
work but for Moorestown at least we still need to sort out GEM backed base
framebuffer, which means figuring out why GEM explodes early on at the
moment.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Larry Finger [Thu, 5 May 2011 23:52:56 +0000 (18:52 -0500)]
staging: vt6655: Fix warnings if CONFIG_PM is not defined
If staging:vt6655 is built without CONFIG_DM being defined, there are large
numbers of warnings of the following form due to use of #if instead of #ifdef:
In file included from drivers/staging/vt6655/upc.h:32,
from drivers/staging/vt6655/mac.h:39,
from drivers/staging/vt6655/wroute.c:34:
drivers/staging/vt6655/device.h:399:5: warning: "CONFIG_PM" is not defined
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Grant Grundler [Wed, 4 May 2011 16:59:47 +0000 (09:59 -0700)]
staging: brcm80211: SDIO/MMC cleanups
misc coding style cleanups to dhd_sdio/sdmmc
o replace PKTFREE2 macro with static dhdsdio_pktfree2()
o drop "delta" local var
o drop GSPI_PR55150_BAILOUT
o reformat some of the comments (white space changes)
o drop dhd_bcmsdh_recv_buf wrapper and directly call bcmsdh_recv_buf
Signed-off-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Wed, 4 May 2011 18:51:45 +0000 (11:51 -0700)]
Staging: hv: Add the necessary dependencies to hyperv Kconfig
The vmbus driver dependes on ACPI and PCI subsystems. Change
Kconfig to reflect this.
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
pefoley2@verizon.net [Tue, 3 May 2011 21:40:30 +0000 (17:40 -0400)]
staging: hv: make HYPERV_UTILS depend on NLS to prevent a build error
When HYPERV_UTILS=y and NLS=n the build fails with this error:
MODPOST 3 modules
ERROR: "utf8s_to_utf16s" [drivers/staging/hv/hv_utils.ko] undefined!
This patch fixes this by adding a dependency on NLS to HYPERV_UTILS.
Signed-off-by: Peter Foley <pefoley2@verizon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Fri, 29 Apr 2011 20:45:16 +0000 (13:45 -0700)]
Staging: hv: Get rid of an unused variable from struct hv_driver
The name field is unused in struct hv_driver. Get rid of it.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Fri, 29 Apr 2011 20:45:15 +0000 (13:45 -0700)]
Staging: hv: VMBUS is a acpi enumerated device; get irq value from bios
On some Windows hosts, the Linux PCI sub-system is not
allocating irq resources to the
vmbus driver. It looks like VMBUS is an ACPI enumerated device.
Retrieve the irq information from DSDT.
Currently we use this bios specified irq, if the PCI
sub-system fails to allocate the irq.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Fri, 29 Apr 2011 20:45:14 +0000 (13:45 -0700)]
Staging: hv: Use the shutdown() function in struct hv_driver
Use the newly introduced shutdown() function.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Fri, 29 Apr 2011 20:45:13 +0000 (13:45 -0700)]
Staging: hv: Add shutdown() function to struct hv_driver
Add shutdown() function to struct hv_driver.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Fri, 29 Apr 2011 20:45:12 +0000 (13:45 -0700)]
Staging: hv: Use the remove() function in struct hv_driver
Use the newly introduced remove() function in struct hv_driver.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Fri, 29 Apr 2011 20:45:11 +0000 (13:45 -0700)]
Staging: hv: Add remove() function to struct hv_driver
Add remove() function to struct hv_driver.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Fri, 29 Apr 2011 20:45:10 +0000 (13:45 -0700)]
Staging: hv: Use the probe function in struct hv_driver
Use the newly introduced probe function.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Fri, 29 Apr 2011 20:45:09 +0000 (13:45 -0700)]
Staging: hv: Add probe function to struct hv_driver
Add probe function to struct hv_driver.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Fri, 29 Apr 2011 20:45:08 +0000 (13:45 -0700)]
Staging: hv: Get rid of struct hv_bus
Now, get rid of struct hv_bus. We will no longer be embedding
struct bus_type.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Fri, 29 Apr 2011 20:45:07 +0000 (13:45 -0700)]
Staging: hv: Make event_dpc a stand alone variable
In preparation for getting rid of struct hv_bus, Make event_dpc a
stand alone variable.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Fri, 29 Apr 2011 20:45:06 +0000 (13:45 -0700)]
Staging: hv: Make msg_dpc a stand alone variable
In preparation for cleaning up (getting rid of) of the hv_bus structure,
make msg_dpc a stand alone variable.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Fri, 29 Apr 2011 20:45:05 +0000 (13:45 -0700)]
Staging: hv: Make hv_pci_dev a static variable
Make hv_pci_dev a static variable.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Fri, 29 Apr 2011 20:45:04 +0000 (13:45 -0700)]
Staging: hv: Properly handle errors in hv_pci_probe()
Much of the vmbus driver initialization is done within the hv_pci_probe()
function. Properly handle errors in hv_pci_probe so that we can
appropriately deal with loading of the vmbus driver.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Fri, 29 Apr 2011 20:45:03 +0000 (13:45 -0700)]
Staging: hv: Cleanup vmbus_probe() function
The logic for handling probe failure was broken. Now that we have
cleaned up error handling, get rid of the vmbus_probe_failed_cb()
function.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Fri, 29 Apr 2011 20:45:02 +0000 (13:45 -0700)]
Staging: hv: Cleanup error handling in vmbus_child_device_register()
Cleanup error handling in vmbus_child_device_register().
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Fri, 29 Apr 2011 20:45:01 +0000 (13:45 -0700)]
Staging: hv: Get rid of the drv field in struct hv_device
Now, we can rid of the drv field in struct hv_device.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Fri, 29 Apr 2011 20:45:00 +0000 (13:45 -0700)]
Staging: hv: Get rid of vmbus_release_unattached_channels() as it is not used
Since vmbus_release_unattached_channels() is only used in module
unload path and since the vmbus driver cannot be unloaded,
get rid of this "dead" code.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Fri, 29 Apr 2011 20:44:59 +0000 (13:44 -0700)]
Staging: hv: vmbus_driver cannot be unloaded; cleanup accordingly
The vmbus driver cannot be unloaded; the windows host does not
permit this: A) All guest resources given to the host cannot
be recovered and B) Windows host does not permit reloading the
vmbus_driver without re-booting the guest. Both these issues
are host related. Acknowledge this reality and cleanup the
vmbus driver accordingly. Note that, ideally we will want to handle
the root device through the Hyper-V block driver. In this case
unloading the vmbus driver will not be possible because of the
dependency issues.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Abhishek Kane <v-abkane@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Cho, Yu-Chen [Tue, 3 May 2011 09:53:35 +0000 (17:53 +0800)]
staging/rts_pstor: fix Polling thread wakeups CPU
RealTek PCI-E Card Reader rts_pstor driver causes CPU wakeup very
frequently, thatt's bad for power consumption.
Signed-off-by: Cho, Yu-Chen <acho@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Tue, 3 May 2011 09:36:01 +0000 (11:36 +0200)]
staging: brcm80211: removed function wlc_calloc()
Code cleanup. After the previous patches, this function does not have
any added value anymore.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Tue, 3 May 2011 09:36:00 +0000 (11:36 +0200)]
staging: brcm80211: got rid of WL_FFPLD message log macro
Code cleanup. Partially removed, remaining replaced with BCMMSG.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Tue, 3 May 2011 09:35:59 +0000 (11:35 +0200)]
staging: brcm80211: replaced WL_AMPDU_* with BCMMSG
Remove WL_AMPDU_* tracing macros with BCMMSG as it does not need to
be so specific.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Tue, 3 May 2011 09:35:58 +0000 (11:35 +0200)]
staging: brcm80211: replaced WL_TRACE by BCMMSG
Code cleanup. Make code more readable by converting different macro's
(WL_TRACE, WL_AMPDU, etc) into one BCMMSG. This single macro uses wiphy_err()
instead of printk(), so the user is able to correlate a log
message to our driver. This patch only replaces WL_TRACE, subsequent patches
will replace WL_AMPDU etc.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Tue, 3 May 2011 09:35:57 +0000 (11:35 +0200)]
staging: brcm80211: remove unused functions from wlc_phy_qmath.c
The phy code only uses a subset of functions in wlc_phy_qmath.c and
the remaining are unused so those have been removed to cleanup the
codebase.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Tue, 3 May 2011 09:35:56 +0000 (11:35 +0200)]
staging: brcm80211: move qmath sources to phy directory
The functions provided by qmath sources are only used by the
phy source code so qmath sources have been moved there.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Tue, 3 May 2011 09:35:55 +0000 (11:35 +0200)]
staging: brcm80211: remove CRC_INNER_LOOP macro
With the removal of hndcrc16 and hndcrc32 this macro is not needed
anymore. Also the crc-ccitt library functions provide an equivalent
static inline function for this operation.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Tue, 3 May 2011 09:35:54 +0000 (11:35 +0200)]
staging: brcm80211: remove unused hndcrc32 function
hndcrc32 is not used so it is removed from the driver codebase.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Tue, 3 May 2011 09:35:53 +0000 (11:35 +0200)]
staging: brcm80211: replace hndcrc16 with crc-ccitt function
The implementation of hndcrc16 is identical to that of the crc-ccitt
function available in linux kernel library functions. The driver now
uses the crc-ccitt function.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Tue, 3 May 2011 09:35:52 +0000 (11:35 +0200)]
staging: brcm80211: moved ASSERT logic to fullmac driver
Code cleanup. Softmac driver does not use ASSERTs anymore.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Tue, 3 May 2011 09:35:51 +0000 (11:35 +0200)]
staging: brcm80211: removed ASSERTs from wlc_pmu.c
Code cleanup.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Tue, 3 May 2011 09:35:50 +0000 (11:35 +0200)]
staging: brcm80211: removed ASSERTs from aiutils.c
Code cleanup.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Tue, 3 May 2011 09:35:49 +0000 (11:35 +0200)]
staging: brcm80211: remove socitype member for struct si_pub definition
The attribute socitype is no longer required so it is removed here.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Tue, 3 May 2011 09:35:48 +0000 (11:35 +0200)]
staging: brcm80211: use local variable for socitype during ai_scan
The SOC interface type is only needed to verify that we are accessing
a chip with AMBA AXI interconnect during ai_scan function. Therefor
this can be done with a local variable.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Tue, 3 May 2011 09:35:47 +0000 (11:35 +0200)]
staging: brcm80211: remove check on interconnect type in ai_setcore
All functions in aiutils are only used for AI SOC interconnect chipsets
so no software check is needed other then during the ai_scan function.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Tue, 3 May 2011 09:35:46 +0000 (11:35 +0200)]
staging: brcm80211: move aiutils source files to brcmsmac folder
The aiutils functions are only used by the brcmsmac driver so it has
been moved to the driver specific folder.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Tue, 3 May 2011 09:35:45 +0000 (11:35 +0200)]
staging: brcm80211: cleanup code in source file aiutils.c
The aiutils functions that were taken from siutils have been renamed
with proper ai_ prefix. Calling functions have been updated accordingly.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Tue, 3 May 2011 09:35:44 +0000 (11:35 +0200)]
staging: brcm80211: cleanup definitions in aiutils header file
The aiutils header file contained a few prototypes that are not
defined in the source file so these are removed.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Tue, 3 May 2011 09:35:43 +0000 (11:35 +0200)]
staging: brcm80211: fix checkpatch warning in si_pmu_otp_power
Patch "remove dependency between aiutils and siutils sources" introduced
several checkpatch warnings. This patch remove those in si_pmu_otp_power().
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Tue, 3 May 2011 09:35:42 +0000 (11:35 +0200)]
staging: brcm80211: fix checkpatch issues in si_pmu_measure_alpclk
Patch "remove dependency between aiutils and siutils sources" introduced
several checkpatch warnings. This patch removes those in the function
si_pmu_measure_alpclk().
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Tue, 3 May 2011 09:35:41 +0000 (11:35 +0200)]
staging: brcm80211: fix checkpatch warning in si_pmu_res_init
Patch "remove dependency between aiutils and siutils sources" introduced
several checkpatch warnings. This patch removes one from si_pmu_res_init().
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Tue, 3 May 2011 09:35:40 +0000 (11:35 +0200)]
staging: brcm80211: remove zero initialization of static in si_pmu_ilp_clock
The static variable ilpcycles_per_sec was initialized with zero value, which
is not necessary (checkpatch error). Initialization has been removed.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Tue, 3 May 2011 09:35:39 +0000 (11:35 +0200)]
staging: brcm80211: fix checkpatch warnings in si_pmu_spuravoid_pllupdate
patch "remove dependency between aiutils and siutils sources" resulted
in several checkpatch warnings and errors. This patch fixes those in
function si_pmu_spuravoid_pllupdate().
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Tue, 3 May 2011 09:35:38 +0000 (11:35 +0200)]
staging: brcm80211: remove dependency between aiutils and siutils sources
The two source files have been separated where aiutils is only used
by the brcmsmac driver and the siutils is only used by the brcmfmac
driver.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Tue, 3 May 2011 09:35:37 +0000 (11:35 +0200)]
staging: brcm80211: separate hndpmu functionality for brcmsmac driver
The hndpmu source file has functions for brcmfmac and brcmsmac driver
but it turns out that on function level there is no reuse so for
the brcmsmac its set of functions now reside in wlc_pmu.c.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Tue, 3 May 2011 09:35:36 +0000 (11:35 +0200)]
staging: brcm80211: remove use of si_* functions from wlc_phy_lcn.c
The source file used si_alp_clock to determine crystal frequency.
It now uses the si_pmu_alp_clock call instead to remove dependency from
siutils functionality.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Tue, 3 May 2011 09:35:35 +0000 (11:35 +0200)]
staging: brcm80211: remove unused functions from hndpmu.c
The source file contained several functions that are not being
used in the brcmsmac and/or brcmfmac driver. These functions have
been removed.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Tue, 3 May 2011 09:35:34 +0000 (11:35 +0200)]
Revert "staging: brcm80211: separate hndpmu functionality for brcmsmac driver"
This reverts commit
29811f9d8973e65b46da4283d52f02f78a21f6e0 as it depends on
another patch that was not yet applied.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Tue, 3 May 2011 09:35:33 +0000 (11:35 +0200)]
staging: brcm80211: remove retrieval function for tsf in wlc_main.c
wlc_main.c provides a function to read the tsf, but it is not used.
Consequently, it is removed.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Tue, 3 May 2011 09:35:32 +0000 (11:35 +0200)]
staging: brcm80211: remove tsf retrieval from wlc_bmac.c
Upon receiving a packet the lowest 32 bits of tsf are filled in
by wlc_bmac in wlc_bmac_recv, but this is not useful as wlc_main
needs to reconstruct 64 bit tsf which is retrieves to recover the
actual tsf value at which packet is received. Therefore tsf
retrieval is removed from wlc_bmac.c.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Tue, 3 May 2011 09:35:31 +0000 (11:35 +0200)]
staging: brcm80211: provide TSF value in receive status
Packets passed to the mac80211 stack have a mactime field in the
receive status indicating the actual time it was received by the
phy radio. It was not (properly) filled in before this change.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Tue, 3 May 2011 09:35:30 +0000 (11:35 +0200)]
staging: brcm80211: remove queue info parameter from wlc_send_q
There is only one queue on which the wlc_send_q has to operate. This
queue is available under the struct wlc_info parameter passed so
the additional queue info parameter is redundant.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Tue, 3 May 2011 09:35:29 +0000 (11:35 +0200)]
staging: brcm80211: rename active_queue identifier
The queue for pending transmit packets is called active_queue, but
the driver is only using one single queue. Therefor a more appro-
priate name has been given, ie. pkt_queue.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Tue, 3 May 2011 09:35:28 +0000 (11:35 +0200)]
staging: brcm80211: implement flush driver callback for mac80211
The mac80211 interface has a flush callback which is used by mac80211
to assure all pending transmit packets have been transmitted. This
is used before scanning off-channel.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Tue, 3 May 2011 09:35:27 +0000 (11:35 +0200)]
staging: brcm80211: removed remaining ASSERTs from phy
Partially deleted, partially replaced by WARN_ON to indicate hardware
failure to the user.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Tue, 3 May 2011 09:35:26 +0000 (11:35 +0200)]
staging: brcm80211: removed all ASSERTs from wlc_ampdu.c
Either removed ASSERTs or replaced with WARN_ON in case of HW failure.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Tue, 3 May 2011 09:35:25 +0000 (11:35 +0200)]
staging: brcm80211: removed all ASSERTs from wl_mac80211.c
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Tue, 3 May 2011 09:35:24 +0000 (11:35 +0200)]
staging: brcm80211: delete ASSERTs in 4 files in brcmsmac dir
wlc_antsel.c, wlc_channel.c, wlc_rate.c and wlc_stf.c are now
ASSERT free.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Tue, 3 May 2011 09:35:23 +0000 (11:35 +0200)]
staging: brcm80211: removed ASSERTs from util dir, part 2
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Tue, 3 May 2011 09:35:22 +0000 (11:35 +0200)]
staging: brcm80211: removed ASSERTs from util dir, part 1
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Tue, 3 May 2011 09:35:21 +0000 (11:35 +0200)]
staging: brcm80211: made fullmac error codes more consistent
Code cleanup. The code contains several checks on the condition
SDIOH_API_SUCCESS(status). On failure, the error returned depended on the
check, instead of being consistent. This has been corrected.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Tue, 3 May 2011 09:35:20 +0000 (11:35 +0200)]
staging: brcm80211: replace error codes part 2
Replacing part of the proprietary error code values with native error
code values.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Tue, 3 May 2011 09:35:19 +0000 (11:35 +0200)]
staging: brcm80211: replace error codes part 1
Replacing part of the proprietary error code values with native error
code values.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Tue, 3 May 2011 09:35:18 +0000 (11:35 +0200)]
staging: brcm80211: removed error string function
Only fullmac used this functionality, in which a broadcom specific error
code was converted to a human readable string. Since this functionality
is not needed, a function and accompanying data structures have been
removed.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Tue, 3 May 2011 09:35:17 +0000 (11:35 +0200)]
staging: brcm80211: removed ASSERTs from wlc_bmac.c
Driver contains far too many ASSERTs. Extraneous asserts removed.
Only asserts that signal a hardware problem have been converted
into WARN_ON.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Tue, 3 May 2011 09:35:16 +0000 (11:35 +0200)]
staging: brcm80211: removed ASSERTs from wlc_ampdu.c
Driver contains far too many ASSERTs.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Tue, 3 May 2011 09:35:15 +0000 (11:35 +0200)]
staging: brcm80211: removed ASSERTs from wlc_main.c
Driver contains far too many ASSERTs. Functions that were only used
from within removed ASSERTs have also been deleted, such as
wlc_bmac_taclear() in wlc_bmac.c.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Tue, 3 May 2011 09:35:14 +0000 (11:35 +0200)]
staging: brcm80211: honour basic rate configuration from mac80211
The basic rates to be used are provided by the wireless access point
within the beacon information. The station should conform to those
rates and this information is passed by mac80211 to the driver. The
patch processes the information and applies the basic rates accor-
dingly. This is required functionality for mac80211 drivers.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Tue, 3 May 2011 09:35:13 +0000 (11:35 +0200)]
staging: brcm80211: rename rate related definitions
Added prefix WLC_ to the rate related definition.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Tue, 3 May 2011 09:35:12 +0000 (11:35 +0200)]
staging: brcm80211: remove wl_ops_set_rts_threshold
The function is not required as the driver does honour the USE_RTS_CTS
flag. The mac80211 API notes state that either one or the other is required
(see http://wireless.kernel.org/en/developers/Documentation/mac80211/API).
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Tue, 3 May 2011 09:35:11 +0000 (11:35 +0200)]
staging: brcm80211: remove unnecessary if statements from bss_info_changed
The mac80211 api callback bss_info_changed contained two placeholders
that were expected to need to be implemented. However, reading the mac80211
notes (http://wireless.kernel.org/en/developers/Documentation/mac80211/API)
shows that it is not needed as the driver honours the flags provided with
the transmit sk_buff.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Tue, 3 May 2011 09:35:10 +0000 (11:35 +0200)]
staging: brcm80211: replaced WL_ERROR in rest of softmac.
Code cleanup. Replaced proprietary function by wiphy_err(). Removed
WL_ERROR() on spots where struct wlc was not available and message
was redundant.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Tue, 3 May 2011 09:35:09 +0000 (11:35 +0200)]
staging: brcm80211: replaced WL_ERROR in wlc_main.c
Code cleanup. Replaced proprietary function by wiphy_err().
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Tue, 3 May 2011 09:35:08 +0000 (11:35 +0200)]
staging: brcm80211: replaced WL_ERROR in wlc_bmac.c
Code cleanup. Replaced proprietary function by wiphy_err().
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Tue, 3 May 2011 09:35:07 +0000 (11:35 +0200)]
staging: brcm80211: replaced WL_ERROR in wlc_ampdu.c
Code cleanup. Replaced proprietary function by wiphy_err().
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Tue, 3 May 2011 09:35:06 +0000 (11:35 +0200)]
staging: brcm80211: replaced WL_ERROR in two files.
Code cleanup. Use Linux functions instead of Broadcom specific
one. On spots where the wiphy object is not yet available,
pr_err() is used instead.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Tue, 3 May 2011 09:35:05 +0000 (11:35 +0200)]
staging: brcm80211: making wiphy object accessible from wlc and phy
Next commits will replace WL_ERROR and friends with BCMMSG. Because
this new message log function require a wiphy object, device object pointers
have been added to three data structures.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Tue, 3 May 2011 09:35:04 +0000 (11:35 +0200)]
staging: brcm80211: removed WL_NONE
Code cleanup.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Tue, 3 May 2011 09:35:03 +0000 (11:35 +0200)]
staging: brcm80211: bugfix for fullmac return codes
Some code paths in the fullmac driver did not return a negative value
on error. This has been corrected.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Tue, 3 May 2011 09:35:02 +0000 (11:35 +0200)]
staging: brcm80211: made error codes in bcmutils.h positive
Code cleanup. Bringing driver more inline with Linux code style.
Does not introduce behavioral changes.
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Tue, 3 May 2011 09:35:01 +0000 (11:35 +0200)]
staging: brcm80211: fixed error in non-DHD_DEBUG fullmac build
A build error was introduced with recent fullmac changes when building without
debug option configured:
drivers/staging/brcm80211/brcmfmac/dhd_sdio.c: In function
‘dhdsdio_sdiod_drive_strength_init’:
drivers/staging/brcm80211/brcmfmac/dhd_sdio.c:6366:3: error: ‘chn’ undeclared
Cc: devel@linuxdriverproject.org
Cc: linux-wireless@vger.kernel.org
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vasanthakumar Thiagarajan [Mon, 2 May 2011 12:20:59 +0000 (17:50 +0530)]
ath6kl: Remove few more unused header files
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vasanthakumar Thiagarajan [Mon, 2 May 2011 05:52:49 +0000 (11:22 +0530)]
ath6kl: Replace data type macros with kernel defined ones
Now athtypes_linux.h and a_types.h are unused, remove them.
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vasanthakumar Thiagarajan [Mon, 2 May 2011 05:52:48 +0000 (11:22 +0530)]
ath6kl: Remove unused macros from gpio_reg.h
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vasanthakumar Thiagarajan [Mon, 2 May 2011 05:52:47 +0000 (11:22 +0530)]
ath6kl: Remove unused regdump.h
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vasanthakumar Thiagarajan [Mon, 2 May 2011 05:52:46 +0000 (11:22 +0530)]
ath6kl: Remove somemore unused header files from hw4.0/hw/
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vasanthakumar Thiagarajan [Mon, 2 May 2011 05:52:45 +0000 (11:22 +0530)]
ath6kl: Remove unused hw4.0/hw/vmc_reg.h
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vasanthakumar Thiagarajan [Mon, 2 May 2011 05:52:44 +0000 (11:22 +0530)]
ath6kl: Remove unused bb_lc_reg.h
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Vasanthakumar Thiagarajan [Mon, 2 May 2011 05:52:43 +0000 (11:22 +0530)]
ath6kl: Remove unused hw2.0/hw/uart_reg.h
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
projects / openwrt / staging / blogic.git / log