git.openwrt.org Git - openwrt/staging/blogic.git/log

drm/i915/cnl: Reprogram DMC firmware after S3/S4 resume

The DMC firmware program memory is lost after S3/S4 system suspend, so
we need to reprogram it during resume.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103070
Fixes: cebfcead63de ("drm/i915/DMC/CNL: Load DMC on CNL")
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003095159.711-1-imre.deak@intel.com

drm/i915: Skip vblank waits for cursor updates when watermarks dont need updating

In legacy cursor updates we need the extra vblank waits if we update
watermarks, and then we cannot skip the vblank for cursors.

This is why for < gen9 we disabled the cursor fastpath, but we can skip
the wait when post vblank watermarks are untouched.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170919121419.13708-2-maarten.lankhorst@linux.intel.com

drm/i915: Unset legacy_cursor_update early in intel_atomic_commit, v3.

Commit b44d5c0c105a ("drm/i915: Always wait for flip_done, v2.") removed
the call to wait_for_vblanks and replaced it with flip_done.

Unfortunately legacy_cursor_update was unset too late, and the
replacement call drm_atomic_helper_wait_for_flip_done() was
a noop. Make sure that its unset before setup_commit() is
called to fix this issue.

Changes since v1:
- Force vblank wait for watermarks not yet converted to atomic too. (Ville)
- Use for_each_new_intel_crtc_in_state. (Ville)
Changes since v2:
- Move the optimization to a separate commit. (Ville)

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: b44d5c0c105a ("drm/i915: Always wait for flip_done, v2.")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102675
Testcase: kms_cursor_crc
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reported-by: Marta Löfstedt <marta.lofstedt@intel.com>
Cc: Marta Löfstedt <marta.lofstedt@intel.com>
Tested-by: Marta Löfstedt <marta.lofstedt@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170919121419.13708-1-maarten.lankhorst@linux.intel.com

drm/i915: Organize GLK_COLORS.

Let's organize this in a way that it gets more obvious
when looking to the platform colors and in a easier
way to get inherited.

v2: Add comma at the end (Jani), when possible.

Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003063652.17248-3-rodrigo.vivi@intel.com

drm/i915: Organize GEN features inheritance.

As Chris noticed the current organization is confusing
and inheritance is not clear.

So, let's split it in GEN<n>_FEATURES <cdn>_PLATFORM
where new GEN inherit features from previous gens and
Platforms only use gen features plus what ever is specific
for that platform and shouldn't be passed on.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003063652.17248-2-rodrigo.vivi@intel.com

drm/i915/skl: Fix has_ipc on skl and document WaDisableIPC.

According to Spec for SKL+: "Isochronous Priority Control.
If enabled, Display sends demoted requests once the transition
watermark is reached. If transition watermark is not enabled,
Display sends demoted requests when the display buffer is full."

The commit 'e57f1c02155f ("drm/i915/gen9+: Add has_ipc flag in
device info structure")' introduced that as gen9+ but missing many
SKL Skus.

I believe the reason for that is Spec also mentions workarounds for
SKL-ALL: "IPC (Isoch Priority Control) may cause underflows
WA: Do not enable IPC in register ARB_CTL2"

It seems lame to add the feature and forever disable it,
but it will avoid a mistake of enabling it when we are reorganizing
the feature definitions on i915_pci.c later.

It will also allow us to probably extend that workaround for
other platforms.

Cc: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003063652.17248-1-rodrigo.vivi@intel.com

drm/i915: Fix DDI PHY init if it was already on

The common lane power down flag of a DPIO PHY has a funky semantic:
after the initial enabling of the PHY (so from a disabled state) this
flag will be clear. It will be set only after the PHY will be used for
the first time (for instance due to enabling the corresponding pipe) and
then become unused (due to disabling the pipe). During the initial PHY
enablement we don't know which of the above phases we are in, so move
the check for the flag where this is known, the HW readout code. This is
where the rest of lane power down status checks are done anyway.

This fixes at least a problem on GLK where after module reloading, the
common lane power down flag of PHY1 is set, but the PHY is actually
powered-on and properly set up. The GRC readout code for other PHYs will
hence think that PHY1 is not powered initially and disable it after the
GRC readout. This will cause the AUX power well related to PHY1 to get
disabled in a stuck state, timing out when we try to enable it later.

Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Fixes: e93da0a0137b ("drm/i915/bxt: Sanitiy check the PHY lane power down status")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102777
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171002135307.26117-1-imre.deak@intel.com

drm/i915/glk, cnl: Implement WaDisableScalarClockGating

On GLK and CNL enabling a pipe with its pipe scaler enabled will result
in a FIFO underrun. This happens only once after driver loading or
system/runtime resume, more specifically after power well 1 gets
enabled; subsequent modesets seem to be free of underruns. The BSpec
workaround for this is to disable the pipe scaler clock gating for the
duration of modeset. Based on my tests disabling clock gating must be
done before enabling pipe scaling and we can re-enable it after the pipe
is enabled and one vblank has passed.

For consistency I also checked if plane scaling would cause the same
problem, but that doesn't seem to trigger this problem.

The patch is based on an earlier version from Ander.

v2 (Rodrigo):
- Set also CLKGATE_DIS_PSL bits 8 and 9.
- Add also the BSpec workaround ID.

Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100302
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171002075557.32615-1-imre.deak@intel.com

drm/i915: Add has_psr-flag to gen9lp

While testing Jim Bride's latest batch of PSR patches I noticed
that gen9lp doesn't include the has_psr flag, and that our GLK
system thus reported PSR as unsupported.

This patch simply adds has_psr.

Signed-off-by: David Weinehall <david.weinehall@linux.intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170808100952.26448-1-david.weinehall@linux.intel.com

drm/i915/gen8+: Init/reset display interrupts only if i915 IRQs are enabled

Only init / reset the display interrupts during power well enabling /
disabling if the i915 interrupts are enabled. So far we did the
init / reset during driver loading / resuming too, where
initialization / enabling of the i915 interrupts happens only at a later
point. This didn't cause a problem due to GEN8_MASTER_IRQ_CONTROL being
cleared, but triggered gen3_assert_iir_is_zero() in GEN8_IRQ_INIT_NDX().

References: https://bugs.freedesktop.org/show_bug.cgi?id=102988
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170928100624.15533-1-imre.deak@intel.com

drm/i915/gen9+: Set same power state before hibernation image save/restore

Atm, on GEN9 big core platforms before saving the hibernation image we
uninitialize the display, disabling power wells manually, while before
restoring the image we keep things powered (letting HW/DMC power down
things as needed). The state mismatch will trigger the following error:

DC state mismatch (0x0 -> 0x2)

While the restore handler knows how to initialize the display from an
unknown state (due to a different loader kernel or not having i915
loaded in the loader kernel) we should still use the same state for
consistency before image saving and restoring. Do this by uniniting the
display before restoring the image too.

Bugzilla: https://bugs.freedesktop.org/attachment.cgi?id=133376
Reported-and-tested-by: Wang Wendy <wendy.wang@intel.com>
Reported-and-tested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Wang Wendy <wendy.wang@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170816144607.9935-1-imre.deak@intel.com

drm/i915/execlists: Cache the last priolist lookup

Avoid the repeated rbtree lookup for each request as we unwind them by
tracking the last priolist.

v2: Fix up my unhelpful suggestion of using default_priolist.

Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170928193910.17988-4-chris@chris-wilson.co.uk

drm/i915: Give the invalid priority a magic name

We use INT_MIN to denote the priority of a request that has not been
submitted to the scheduler; we treat INT_MIN as an invalid priority and
initialise the request to it. Give the value a name so it stands out.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170928193910.17988-3-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com

drm/i915/execlists: Move request unwinding to a separate function

In the future, we will want to unwind requests following a preemption
point. This requires the same steps as for unwinding upon a reset, so
extract the existing code to a separate function for later use.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170928193910.17988-2-chris@chris-wilson.co.uk

drm/i915: Move i915_gem_restore_fences to i915_gem_resume

i915_gem_restore_fences is GEM resumption task hence it is moved to
i915_gem_resume from i915_restore_state.

Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1506661116-12106-1-git-send-email-sagar.a.kamble@intel.com
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/selftests: Replace wmb() with i915_gem_chipset_flush()

Currently, we are being fairly lazy and only using a wmb() following an
update to an active batch. Previously, we have found that to be
insufficient to ensure that a write from the CPU reaches memory in a
timely fashion, and in some caches we may need to flush a chipset cache.
To that end, we have i915_gem_chipset_flush() so use it.

Suggested-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170926153409.7928-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Update DRIVER_DATE to 20170929

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Use memset64() to prefill the GTT page

Take advantage of optimised memset64() instead of open coding it to
prefill the GTT pages.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170926095353.11036-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: Also discard second CRC on gen8+ platforms.

One of the differences I spotted for GEN8+ platforms when
compared to older platforms is that spec for BDW+ includes
this sentence:

"The first CRC done indication after CRC is first enabled is
from only a partial frame, so it will not have the expected
CRC result."

This is an indication that on BDW+ platforms, by the time
we receive the interrupt the CRC is not accurate yet for
the full frame. That would be ok, because we are already
skipping the first CRC for all platforms. However the comment
on the code state that it is for some unknown reason. Also,
on CHV (gen8 lp) we were already discarding the second CRC
as well to make sure we have a reliable CRC on hand.

So based on all ou tests and bugs it seems that it is not
on CHV that needs to discard 2 first CRCs, but all BDW+
platforms.

Starting on SKL we have this CRC done bit (24), but the
experiments around the use of this bit wasn't that stable
as just discarding the second CRC. So, let's for now
just move with CHV solution for all gen8+ platforms and
make our CI a bit more stable.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102374
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101309
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tested-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170928002040.7917-1-rodrigo.vivi@intel.com

drm/i915/psr: Set frames before SU entry for psr2

Set frames before SU entry value for max resync frame count of
dpcd register 2009, bit field 0:3.

v2 :
- add macro EDP_PSR2_FRAME_BEFORE_SU (Rodrigo)
- remove EDP_FRAMES_BEFORE_SU_ENTRY (Rodrigo)
- add check ==1 for dpcd_read call (ville)

v3 : (Rodrigo)
- move macro EDP_PSR2_FRAME_BEFORE_SU after EDP_PSR2_FRAME_BEFORE_SU
- replace with &=

v4 :
- change the macro to shift value (jani)
- updated register names

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
CC: Puthikorn Voravootivat <puthik@chromium.org>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1506419953-32605-2-git-send-email-vathsala.nagaraju@intel.com

drm/dp: Add defines for latency in sink

Add defines for dpcd register 2009 (synchronization latency
in sink).

v2:
- add spec version (Daniel)
- use register name as is in spec,only drop excess
from end (jani)
- add the full register contents (jani)
[Rodrigo fixed spec version when merging]

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
CC: Puthikorn Voravootivat <puthik@chromium.org>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1506419953-32605-1-git-send-email-vathsala.nagaraju@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm-upstream/drm-next into drm-intel-next-queued

Need MST sideband message transaction to power up/down nodes.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Allow optimized platform checks

If we store the platform as a bitmask, and convert the
IS_PLATFORM macro to use it, we allow the compiler to
merge the IS_PLATFORM(a) || IS_PLATFORM(b) || ... checks
into a single conditional.

As a secondary benefit this saves almost 1k of text:

    text           data     bss     dec     hex filename
-1460254          60014    3656 1523924  1740d4 drivers/gpu/drm/i915/i915.ko
+1459260          60026    3656 1522942  173cfe drivers/gpu/drm/i915/i915.ko

v2: Removed the infamous -1.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170927164138.15474-1-tvrtko.ursulin@linux.intel.com

Merge branch 'drm-next-4.15' of git://people.freedesktop.org/~agd5f/linux into drm-next

First feature pull for 4.15.  Highlights:
- Per VM BO support
- Lots of powerplay cleanups
- Powerplay support for CI
- pasid mgr for kfd
- interrupt infrastructure for recoverable page faults
- SR-IOV fixes
- initial GPU reset for vega10
- prime mmap support
- ttm page table debugging improvements
- lots of bug fixes

* 'drm-next-4.15' of git://people.freedesktop.org/~agd5f/linux: (232 commits)
  drm/amdgpu: clarify license in amdgpu_trace_points.c
  drm/amdgpu: Add gem_prime_mmap support
  drm/amd/powerplay: delete dead code in smumgr
  drm/amd/powerplay: delete SMUM_FIELD_MASK
  drm/amd/powerplay: delete SMUM_WAIT_INDIRECT_FIELD
  drm/amd/powerplay: delete SMUM_READ_FIELD
  drm/amd/powerplay: delete SMUM_SET_FIELD
  drm/amd/powerplay: delete SMUM_READ_VFPF_INDIRECT_FIELD
  drm/amd/powerplay: delete SMUM_WRITE_VFPF_INDIRECT_FIELD
  drm/amd/powerplay: delete SMUM_WRITE_FIELD
  drm/amd/powerplay: delete SMU_WRITE_INDIRECT_FIELD
  drm/amd/powerplay: move macros to hwmgr.h
  drm/amd/powerplay: move PHM_WAIT_VFPF_INDIRECT_FIELD to hwmgr.h
  drm/amd/powerplay: move SMUM_WAIT_VFPF_INDIRECT_FIELD_UNEQUAL to hwmgr.h
  drm/amd/powerplay: move SMUM_WAIT_INDIRECT_FIELD_UNEQUAL to hwmgr.h
  drm/amd/powerplay: add new helper functions in hwmgr.h
  drm/amd/powerplay: use SMU_IND_INDEX/DATA_11 pair
  drm/amd/powerplay: refine powerplay code.
  drm/amd/powerplay: delete dead code in hwmgr.h
  drm/amd/powerplay: refine interface in struct pp_smumgr_func
  ...

Merge tag 'drm-intel-next-2017-09-07' of git://anongit.freedesktop.org/git/drm-intel into drm-next

Getting started with v4.15 features:

- Cannonlake workarounds (Rodrigo, Oscar)
- Infoframe refactoring and fixes to enable infoframes for DP (Ville)
- VBT definition updates (Jani)
- Sparse warning fixes (Ville, Chris)
- Crtc state usage fixes and cleanups (Ville)
- DP vswing, pre-emph and buffer translation refactoring and fixes (Rodrigo)
- Prevent IPS from interfering with CRC capture (Ville, Marta)
- Enable Mesa to advertise ARB_timer_query (Nanley)
- Refactor GT number into intel_device_info (Lionel)
- Avoid eDP DP AUX CH timeouts harder (Manasi)
- CDCLK check improvements (Ville)
- Restore GPU clock boost on missed pageflip vblanks (Chris)
- Fence register reservation API for vGPU (Changbin)
- First batch of CCS fixes (Ville)
- Finally, numerous GEM fixes, cleanups and improvements (Chris)

* tag 'drm-intel-next-2017-09-07' of git://anongit.freedesktop.org/git/drm-intel: (100 commits)
  drm/i915: Update DRIVER_DATE to 20170907
  drm/i915/cnl: WaThrottleEUPerfToAvoidTDBackPressure:cnl(pre-prod)
  drm/i915: Lift has-pinned-pages assert to caller of ____i915_gem_object_get_pages
  drm/i915: Display WA #1133 WaFbcSkipSegments:cnl, glk
  drm/i915/cnl: Allow the reg_read ioctl to read the RCS TIMESTAMP register
  drm/i915: Move device_info.has_snoop into the static tables
  drm/i915: Disable MI_STORE_DATA_IMM for i915g/i915gm
  drm/i915: Re-enable GTT following a device reset
  drm/i915/cnp: Wa 1181: Fix Backlight issue
  drm/i915: Annotate user relocs with __user
  drm/i915: Constify load detect mode
  drm/i915/perf: Remove __user from u64 in drm_i915_perf_oa_config
  drm/i915: Silence sparse by using gfp_t
  drm/i915: io unmap functions want __iomem
  drm/i915: Add __rcu to radix tree slot pointer
  drm/i915: Wake up the device for the fbdev setup
  drm/i915: Add interface to reserve fence registers for vGPU
  drm/i915: Use correct path to trace include
  drm/i915: Fix the missing PPAT cache attributes on CNL
  drm/i915: Fix enum pipe vs. enum transcoder for the PCH transcoder
  ...

Merge tag 'drm-misc-next-2017-09-20' of git://anongit.freedesktop.org/git/drm-misc into drm-next

UAPI Changes:

Cross-subsystem Changes:

Core Changes:
- DP SDP defines (Ville)
- polish for scdc helpers (Thierry Reding)
- fix lifetimes for connector/plane state across crtc changes (Maarten
  Lankhorst).
- sparse fixes (Ville+Thierry)
- make legacy kms ioctls all interruptible (Maarten)
- push edid override into the edid helpers (out of probe helpers)
  (Jani)
- DP ESI defines for link status (DK)

Driver Changes:
- drm-panel is now in drm-misc!
- minor panel-simple cleanups/refactoring by various folks
- drm_bridge_add cleanup (Inki Dae)
- constify a few i2c_device_id structs (Arvind Yadav)
- More patches from Noralf's fb/gem helper cleanup
- bridge/synopsis: reset fix (Philippe Cornu)
- fix tracepoint include handling in drivers (Thierry)
- rockchip: lvds support (Sandy Huang)
- move sun4i into drm-misc fold (Maxime Ripard)
- sun4i: refactor driver load + support TCON backend/layer muxing
  (Chen-Yu Tsai)
- pl111: support more pl11x variants (Linus Walleij)
- bridge/adv7511: robustify probing/edid handling (Lars-Petersen
  Clausen)

New hw support:
- S6E63J0X03 panel (Hoegeun Kwon)
- OTM8009A panel (Philippe CORNU)
- Seiko 43WVF1G panel (Marco Franchi)
- tve200 driver (Linus Walleij)

Plus assorted of tiny patches all over, including our first outreachy
patches from applicants for the winter round!

* tag 'drm-misc-next-2017-09-20' of git://anongit.freedesktop.org/git/drm-misc: (101 commits)
  drm: add backwards compatibility support for drm_kms_helper.edid_firmware
  drm: handle override and firmware EDID at drm_do_get_edid() level
  drm/dp: DPCD register defines for link status within ESI field
  drm/rockchip: Replace dev_* with DRM_DEV_*
  drm/tinydrm: Drop driver registered message
  drm/gem-fb-helper: Use debug message on gem lookup failure
  drm/imx: Use drm_gem_fb_create() and drm_gem_fb_prepare_fb()
  drm/bridge: adv7511: Constify HDMI CODEC platform data
  drm/bridge: adv7511: Enable connector polling when no interrupt is specified
  drm/bridge: adv7511: Remove private copy of the EDID
  drm/bridge: adv7511: Properly update EDID when no EDID was found
  drm/crtc: Convert setcrtc ioctl locking to interruptible.
  drm/atomic: Convert pageflip ioctl locking to interruptible.
  drm/legacy: Convert setplane ioctl locking to interruptible.
  drm/legacy: Convert cursor ioctl locking to interruptible.
  drm/atomic: Convert atomic ioctl locking to interruptible.
  drm/atomic: Prepare drm_modeset_lock infrastructure for interruptible waiting, v2.
  drm/tve200: Clean up panel bridging
  drm/doc: Update todo.rst
  drm/dp/mst: Sideband message transaction to power up/down nodes
  ...

drm/i915: Avoid using dev_priv->info.gen directly.

Let's stop this usage before it spreads so much.

1. This check is not part of usual searches happening when adding
new platform.
2. There is already a duplication here with INTEL_INFO(dev_priv)->gen
and INTEL_GEN(dev_priv).

So let's please avoid yet another way.

Cc: Lyude <cpaul@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170926211346.12009-1-rodrigo.vivi@intel.com

i915: Use %pS printk format for direct addresses

Use the %pS printk format for printing symbols from direct addresses.
This is important for the ia64, ppc64 and parisc64 architectures, while on
other architectures there is no difference between %pS and %pF.
Fix it for consistency across the kernel.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: intel-gfx@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1504729681-3504-6-git-send-email-deller@gmx.de

drm/i915/execlists: Notify context-out for lost requests

When cancelling requests, also send the notification to any listeners
(gvt) that the request is no longer scheduled on hw. They may require to
keep the in/out exactly balanced, and so the reuse after the reset may
confuse the listener.

Fixes: 221ab9719bf3 ("drm/i915/execlists: Unwind incomplete requests on resets")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: "Zhenyu Wang" <zhenyuw@linux.intel.com>
Cc: "Wang, Zhi A" <zhi.a.wang@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170926101720.9479-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>

drm/i915/cnl: Add support slice/subslice/eu configs

Cannonlake Slice and Subslice information has changed.

This patch initially provided by Ben adds the proper sseu
initialization.

v2: This v2 done by Rodrigo includes:
    - Fix on Total slices count by avoiding [1][2] and [2][2].
    - Inclusion of EU Per Subslice.
    - Commit message.
v3: This v3 done by Rodrigo includes:
    - Handle all possible bits and extra fuse register.
    - Use INTEL_GEN macro.
    - Fully assume uniform distribution so remove union
      with eu_per_subslice and add proper the comment.
v4: This v4 done by Rodrigo includes:
    - Consider all bits available: 6 bits for slices [27:22]
      and 4 for subslices [21:18].
v5: This v5 done by Rodrigo includes:
    - sseu->subslice_mask = (1 << 4) - 1 - missed on previous
    versions and noticed by Oscar.

Cc: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Oscar Mateo <oscar.mateo@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170920183525.20530-1-rodrigo.vivi@intel.com

drm/amdgpu: clarify license in amdgpu_trace_points.c

It was not clear. The rest of the driver is MIT/X11.

Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add gem_prime_mmap support

v2: drop hdp invalidate/flush.
v3: honor pgoff during prime mmap. Add a barrier after cpu access.
v4: drop begin/end_cpu_access() for now, revisit later.

Signed-off-by: Samuel Li <Samuel.Li@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: delete dead code in smumgr

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: delete SMUM_FIELD_MASK

repeated defining in hwmgr.h

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: delete SMUM_WAIT_INDIRECT_FIELD

repeated defining in hwmgr.h
use PHM_WAIT_INDIRECT_FIELD instand.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: delete SMUM_READ_FIELD

repeated defining in hwmgr.h

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: delete SMUM_SET_FIELD

repeated defining in hwmgr.h

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: delete SMUM_READ_VFPF_INDIRECT_FIELD

repeated defining in hwmgr.h

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: delete SMUM_WRITE_VFPF_INDIRECT_FIELD

repeated defining in hwmgr.h

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: delete SMUM_WRITE_FIELD

the macro is as same as PHM_WRITE_FIELD

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: delete SMU_WRITE_INDIRECT_FIELD

the macro is as same as PHM_WRITE_INDIRECT_FIELD

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: move macros to hwmgr.h

the macro is not relevant to SMU,
so rename SMU_WAIT_FIELD_UNEQUAL to
PHM_WAIT_FIELD_UNEQUAL and move to hwmgr.h

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: move PHM_WAIT_VFPF_INDIRECT_FIELD to hwmgr.h

the macro is not relevant to SMU, so move to hwmgr.h
and rename to PHM_WAIT_VFPF_INDIRECT_FIELD

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: move SMUM_WAIT_VFPF_INDIRECT_FIELD_UNEQUAL to hwmgr.h

the macro is not relevant to SMU, so move to hwmgr.h
and rename to PHM_WAIT_VFPF_INDIRECT_FIELD_UNEQUAL

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: move SMUM_WAIT_INDIRECT_FIELD_UNEQUAL to hwmgr.h

the macro is not relevent to SMU, so move to hwmgr.h
and rename to PHM_WAIT_INDIRECT_FIELD_UNEQUAL

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: add new helper functions in hwmgr.h

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: use SMU_IND_INDEX/DATA_11 pair

in VFPF macros to support virtualization

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: refine powerplay code.

delete struct smumgr, put smu backend function table
in struct hwmgr

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: delete dead code in hwmgr.h

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: refine interface in struct pp_smumgr_func

unify to use struct hwmgr as function parameter in
smumgr.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: simplify pinning into visible VRAM

Just set the CPU access required flag when we pin it.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:fix firmware memoryleak(v2)

this fix memory leak due to request_firmware after driver
unloaded

v2:
release gmc firmware for gmc6/7/8 as well

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:fix uvd ring fini routine(v2)

fix missing finish uvd enc_ring.
v2:
since the adev pointer check in already in ring_fini
so drop the check outsider

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/sriov:alloc KIQ MQD in VRAM(v2)

this way after KIQ MQD released in drv unloading, CPC
can still let KIQ access this MQD thus RLCV SAVE_VF
will not fail

v2:
always use VRAM domain for KIQ MQD no matter BM or SRIOV

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:unmap KCQ in gfx hw_fini(v2)

v2:
move kcq_disable out of SRIOV, make it genearal

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:halt when vm fault

only with this way we can debug the VMC page fault issue

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add copy_pte_num_dw member in amdgpu_vm_pte_funcs

Use it to replace the hard coded value in amdgpu_vm_bo_update_mapping().

Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix a bug in amdgpu_fill_buffer()

When max_bytes is not 8 bytes aligned and bo size is larger than
max_bytes, the last 8 bytes in a ttm node may be left unchanged.
For example, on pre SDMA 4.0, max_bytes = 0x1fffff, and the bo size
is 0x200000, the problem will happen.

In order to fix the problem, we separately store the max nums of
PTEs/PDEs a single operation can set in amdgpu_vm_pte_funcs
structure, rather than inferring it from bytes limit of SDMA
constant fill, i.e. fill_max_bytes.

Together with the fix, we replace the hard code value "10" in
amdgpu_vm_bo_update_mapping() with the corresponding values from
structure amdgpu_vm_pte_funcs.

Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Correct bytes limit for SDMA 3.0 copy and fill

Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: use 2MB fragment size for GFX6,7 and 8

Use 2MB fragment size by default for older hardware generations as well.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: John Bridgman <john.bridgman@amd.com>
Reviewed-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix driver reloading failure

SRIOV doesn't implement PMC capability of PCIe, so it can't update
power state by reading PMC register.

Currently, amdgpu driver doesn't disable pci device when removing
driver, the enable_cnt of pci device will not be decrease to 0.
When reloading driver, pci_enable_device will do nothing as
enable_cnt is not zero. And power state will not be updated as PMC
is not support.
So current_state of pci device is not D0 state and pci_enable_msi
return fail.

Add pci_disable_device when remmoving driver to fix the issue.

Signed-off-by: Xiangliang.Yu <Xiangliang.Yu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: refine phm_register_thermal_interrupt interface

currently, not all asics implement this callback function
so not return error to avoid powerplay initialize failed
in those asices

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: add vega10/raven mmhub/athub golden settings

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: change alert temperature range

Change to more meaningful range that triggers thermal
interrupts.

Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: implement register thermal interrupt for Vega10

Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: add register thermal interrupt in hwmgr_hw_init

Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add cgs query info of pci bus devfn

Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: Partial revert of iova debugfs

We discovered that on some devices even with iommu enabled
you can access all of system memory through the iommu translation.

Therefore, we revert the read method to the translation only service
and drop the write method completely.

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christan König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amgpu: update vega10 sdma golden setting

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amgpu: update raven sdma golden setting

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/sriov:fix memory leak after gpu reset

GPU reset will require all hw doing hw_init thus
ucode_init_bo will be invoked again, which lead to
memory leak

skip the fw_buf allocation during sriov gpu reset to avoid
memory leak.

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:make ctx_add_fence interruptible(v2)

otherwise a gpu hang will make application couldn't be killed
under timedout=0 mode

v2:
Fix memoryleak job/job->s_fence issue
unlock mn
remove the ERROR msg after waiting being interrupted

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/sriov:init csb for gfxv9

RLC need CSB registers initiated under SRIOV during world switch
otherwise the clear state buffer behav will not be recovered to
current VF scheme after switch back

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/sriov:increate mailbox polling timeout

increase timeout to 12 seconds,because there may have multiple
FLR waiting for done, the waiting time of events may be long,
increase to 12s to reduce timeout failure.

Signed-off-by: Horace Chen <horace.chen@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/sriov:fix page fault issue of driver unload

bo_free on csa is too late to put in amdgpu_fini because that
time ttm is already finished,
Move it earlier to avoid the page fault.

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Horace Chen <horace.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:use formal register to trigger hdp invalidate

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:hdp flush should be put it initialized

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:insert TMZ_BEGIN

FRAME_CONTROL(begin) is needed for vega10 due to ucode logic change,
it can fix some CTS random fail under gfx preemption enabled mode.

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/sriov:don't load psp fw during gpu reset

At least for SRIOV we found reload PSP fw during
gpu reset cause PSP hang.

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/sriov:move in_reset to adev and rename

currently in_reset is only used in sriov gpu reset, and it
will be used for other non-gfx hw component later, like
PSP, so move it from gfx to adev and rename to in_sriov_reset
make more sense.

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:no kiq in IH

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/sriov:fix missing error handling

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add GPU reset functionality for Vega10

V2

Signed-off-by: Ken Wang <Ken.Wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/ttm: Remove TTM dma tracepoint since it's not required anymore

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: remove usage of ttm trace

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: add support for iova_to_phys to replace TTM trace (v5)

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(v2): Add domain to iova debugfs
(v3): Add true read/write methods to access system memory of pages
mapped to the device
(v4): Move get_domain call out of loop and return on error
(v5): Just use kmap/kunmap

drm/amd/amdgpu: Fold TTM debugfs entries into array (v2)

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(v2): add domains and avoid strcmp

drm/amdgpu: fix checkpatch.pl warning to amdgpu_drv.c

fix checkpatch.pl WARNING:
Prefer 'unsigned int' to bare use of 'unsigned'

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove the clearance of vce 4.0 interrupt mask

Requested by SRIOV, the clearance of the bit moved into firmware

Signed-off-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/sdma3: set wptr shadow atomically

Port it from sdma4 for wptr polling usage.

Signed-off-by: Xiangliang.Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/sdma3: Enable sdma wptr polling for SRIOV

When hypervisor triggering FLR for one of VFs, need to enable sdma
wptr polling to avoid missing wptr update if enabling doorbell.

Signed-off-by: Xiangliang.Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/ttm: cleanup ttm_page_alloc_dma.c

Remove unused defines and variables. Also stop computing the
gfp_flags when they aren't used.

No intended functional change.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Track pending retry faults in IH and VM (v2)

IH tracks pending retry faults in a hash table for fast lookup in
interrupt context. Each VM has a short FIFO of pending VM faults for
processing in a bottom half.

The IH prescreening stage adds retry faults and filters out repeated
retry interrupts to minimize the impact of interrupt storms.

It's the VM's responsibility remove pending faults once they are
handled. For now this is only done when the VM is destroyed.

v2:
- Made the hash table smaller and the FIFO longer. I never want the
FIFO to fill up, because that would make prescreen take longer.
128 pending page faults should be enough to keep migrations busy.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com> (v1)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: Closed hash table with low overhead (v2)

This adds a statically sized closed hash table implementation with
low memory and CPU overhead. The API is inspired by kfifo.

Storing, retrieving and deleting data does not involve any dynamic
memory management, which makes it ideal for use in interrupt context.
Static memory usage per entry comprises a 32 or 64 bit hash key, two
bits for occupancy tracking and the value size stored in the table.
No list heads or pointers are needed. Therefore this data structure
should be quite cache-friendly, too.

It uses linear probing and lazy deletion. During lookups free space
is reclaimed and entries relocated to speed up future lookups.

v2: squash in do_div and _BITOPS_LONG_SHIFT fixes

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add prescreening stage in IH processing (v2)

To filter out high-frequency interrupts that can be safely ignored.

v2: squash in trivial typo fix for si (Alex)

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Use PASID manager from KGD

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Separate doorbell allocation from PASID

PASID management is moving into KGD. Limiting the PASID range to the
number of doorbell pages is no longer practical.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: Add PASID manager for KFD

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add PASID management

Allows assigning a PASID to a VM for identifying VMs involved in page
faults. The global PASID manager is also exported in the KFD
interface so that AMDGPU and KFD can share the PASID space.

PASIDs of different sizes can be requested. On APUs, the PASID size
is deterined by the capabilities of the IOMMU. So KFD must be able
to allocate PASIDs in a smaller range.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>