Zoltan Herpai [Mon, 21 Sep 2015 21:03:37 +0000 (21:03 +0000)]
packages: uboot-mxs: do no modify the U-Boot image, copy as-is
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
SVN-Revision: 47017
Felix Fietkau [Mon, 21 Sep 2015 17:41:07 +0000 (17:41 +0000)]
base-files: fix ramoverlay function with kernels 3.18+
Even though there are not many users left within the OpenWrt tree it seems
this function broke during the kernel 3.18 transition.
Fix it by providing a workdir as required by overlayfs.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 47015
Felix Fietkau [Mon, 21 Sep 2015 17:40:59 +0000 (17:40 +0000)]
uqmi: Add qmi.sh executable bit and fix option dhcp
Using protocol qmi does not work since qmi.sh is not executable.
Setting option dhcp explicitely to 0 actually enables it.
This patch fixes both problems.
Signed-off-by: Matti Laakso <malaakso@elisanet.fi>
SVN-Revision: 47014
Felix Fietkau [Mon, 21 Sep 2015 17:40:52 +0000 (17:40 +0000)]
omap: add Kernel 4.1
tested on Beagleboard C4
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 47013
Felix Fietkau [Mon, 21 Sep 2015 17:40:44 +0000 (17:40 +0000)]
musl: fix build on sh3
musl fails to build when compiled with gcc on sh3 (GCC target/#67260).
Work it around.
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 47012
Felix Fietkau [Mon, 21 Sep 2015 17:18:52 +0000 (17:18 +0000)]
tools/mtd-utils: fix PKG_MIRROR_MD5SUM
The checksum doesn't match the file on mirror2.openwrt.org.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 47010
Felix Fietkau [Mon, 21 Sep 2015 17:18:43 +0000 (17:18 +0000)]
ath10k: remove API v2 firmware, it is no longer needed
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47009
Zoltan Herpai [Fri, 18 Sep 2015 19:29:23 +0000 (19:29 +0000)]
packages: uboot-mxs: place binaries in the designated path
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
SVN-Revision: 47008
Zoltan Herpai [Fri, 18 Sep 2015 19:24:38 +0000 (19:24 +0000)]
packages: uboot-mxs: fix I2SE Duckbill variant
The current patch to add Duckbill support is wrong and does not
even compile. So replace this patch with a working one.
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
SVN-Revision: 47007
Felix Fietkau [Fri, 18 Sep 2015 13:40:03 +0000 (13:40 +0000)]
iw: restore limited event monitor functionality (#20546)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47006
Felix Fietkau [Fri, 18 Sep 2015 13:39:55 +0000 (13:39 +0000)]
arm64: switch to Kernel 4.1
- fix Kernel dts subdir location
- enable virtio networking
we are using -M virt which supports virtio devices
changes in symbols due to make kernel_oldconfig:
- CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y : removed
fix security: upstream id:
d1fd836dcf00d2028c700c7e44d2c23404062c90
- CONFIG_ARM64_CPU_SUSPEND: removed
commit id:
af3cfdbf56b91785650f54e7c9a899d814b4b9fb
- CONFIG_ARM64_PGTABLE_LEVELS=3 : renamed PGTABLE_LEVELS
commit id:
9f25e6ad58e1fb3b4d441e4c55635c4598a6fa94
- CONFIG_GENERIC_CLOCKEVENTS_BUILD=y : removed upstream
commit id:
9f083b74df3a7eaa100b456f2dc195512daf728e
-# CONFIG_PREEMPT_RCU: unnecessary
unknown remove reasons:
-CONFIG_GENERIC_IOMAP=y
-# CONFIG_POWER_RESET_GPIO is not set
-# CONFIG_POWER_RESET_GPIO_RESTART is not set
-# CONFIG_POWER_RESET_LTC2952 is not set
-# CONFIG_POWER_RESET_SYSCON is not set
-# CONFIG_XEN is not set
tested and boot, networking work with qemu
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 47005
Felix Fietkau [Fri, 18 Sep 2015 09:05:11 +0000 (09:05 +0000)]
mac80211: add missing dependency for the hermes driver (#20543)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46998
Felix Fietkau [Fri, 18 Sep 2015 09:05:01 +0000 (09:05 +0000)]
kernel: fix dependencies of the sock_diag debloat patch (#20544)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46997
Felix Fietkau [Thu, 17 Sep 2015 15:38:58 +0000 (15:38 +0000)]
kernel: solos-pci: Increase headroom on received packets
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46993
Felix Fietkau [Thu, 17 Sep 2015 15:38:46 +0000 (15:38 +0000)]
kernel: ipv6: ip6_fragment: fix headroom tests and skb leak
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46992
Jo-Philipp Wich [Thu, 17 Sep 2015 15:31:45 +0000 (15:31 +0000)]
firewall: depend on kmod-ipt-conntrack (#20542)
Our ruleset requires kernel support for conntrack state matching, therfore
depend on the require kmod. Fixes #20542.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 46990
Jo-Philipp Wich [Thu, 17 Sep 2015 13:07:48 +0000 (13:07 +0000)]
tools/mtd-utils: avoid linking libm statically
Rework static linker flags to not link libm statically, this should fix the
build on CentOS where libm.a is not provided by the libc devel package.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 46989
Felix Fietkau [Thu, 17 Sep 2015 10:15:52 +0000 (10:15 +0000)]
x86/geode: enable DMI and Geos support (fixes #20512)
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
SVN-Revision: 46986
Felix Fietkau [Thu, 17 Sep 2015 10:15:45 +0000 (10:15 +0000)]
x86: fix Geode LX timekeeping (#20531)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46985
Felix Fietkau [Thu, 17 Sep 2015 09:45:34 +0000 (09:45 +0000)]
kernel: remove lantiq specific ATM API hacks and their kernel space users (fixes #20523)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46984
John Crispin [Wed, 16 Sep 2015 12:40:40 +0000 (12:40 +0000)]
kernel: unbreak atm ABI for 4.0 and 4.1
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 46983
Felix Fietkau [Wed, 16 Sep 2015 12:38:16 +0000 (12:38 +0000)]
build: do not overwrite already existing host commands
This prevents a later prereq check from overwriting the installed tar
binary.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46982
John Crispin [Wed, 16 Sep 2015 12:08:05 +0000 (12:08 +0000)]
kernel: properly guard the lantiq atm abi hack with an ifdef
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 46981
John Crispin [Wed, 16 Sep 2015 09:37:39 +0000 (09:37 +0000)]
opkg: Extend 'opkg list' command to optionally display package size
'opkg list' command only displays the available packages' name, version and
description. It would be useful to also see the approximate size of the
available package.
This patch extends "opkg list" command with "--size" to optionally show also
the *.ipk size.
* Default behaviour is to list the available packages as earlier:
"name - version - description"
* with "--size" the output of is "name - version - size - description".
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
SVN-Revision: 46980
John Crispin [Wed, 16 Sep 2015 09:37:27 +0000 (09:37 +0000)]
mac80211: rename iwlagn to iwlwifi
follow upstream module rename
commit
3c607d27c818cf4a5d28f2c73b18a88f8fbdfa33
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 46979
John Crispin [Wed, 16 Sep 2015 09:37:18 +0000 (09:37 +0000)]
mac80211: cleanup sort
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 46978
John Crispin [Wed, 16 Sep 2015 09:37:11 +0000 (09:37 +0000)]
mac80211: cleanup remove net prefixes
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 46977
Jo-Philipp Wich [Wed, 16 Sep 2015 08:44:53 +0000 (08:44 +0000)]
prereq-build: test for static zlib availability
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 46976
Jo-Philipp Wich [Wed, 16 Sep 2015 08:43:58 +0000 (08:43 +0000)]
base-files: refactor default_postinst()
- Simplify user spec parsing code
- Alias IPKG_INSTROOT to shorten code
- Quote variables where appropriate
- Remove a useless-use-of-cat instance
- Suppress errors in case control or list files are missing
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 46975
John Crispin [Wed, 16 Sep 2015 08:33:25 +0000 (08:33 +0000)]
kernel 3.18/kernel 4.0/kernel 4.1: add missing symbol
deactivate NET_SCTPPROBE just like NET_TCPPROBE
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 46974
John Crispin [Wed, 16 Sep 2015 08:33:18 +0000 (08:33 +0000)]
x86: add missing symbol
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 46973
John Crispin [Wed, 16 Sep 2015 08:33:14 +0000 (08:33 +0000)]
ar71xx: add support for ap152 reference board
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
SVN-Revision: 46972
John Crispin [Wed, 16 Sep 2015 08:33:04 +0000 (08:33 +0000)]
ath79: dev-eth: fix QCA9561 set phy interface mode and mask
QCA9563 and QCA9561 are two series of Qualcomm SoC Dragonfly. The only different
is QCA9563 w/o internal switch. It has one GMAC with SGMII interface. But they
have the same device ID(0x1150). So they share the same codes.
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
SVN-Revision: 46971
John Crispin [Wed, 16 Sep 2015 08:32:56 +0000 (08:32 +0000)]
ar71xx: uci-defaults: fix ap143 to appropriate group
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
SVN-Revision: 46970
John Crispin [Wed, 16 Sep 2015 08:32:41 +0000 (08:32 +0000)]
lldpd: add extra respawn params
Signed-off-by: Alexandru Ardelean <aa@ocedo.com>
SVN-Revision: 46969
John Crispin [Wed, 16 Sep 2015 08:32:33 +0000 (08:32 +0000)]
lldpd: conversion of init script to procd format
And add respawn param (the main reason for this conversion).
Signed-off-by: Alexandru Ardelean <aa@ocedo.com>
SVN-Revision: 46968
John Crispin [Wed, 16 Sep 2015 08:32:27 +0000 (08:32 +0000)]
lldpd: move /var/run creation + chmod earlier
Signed-off-by: Alexandru Ardelean <aa@ocedo.com>
SVN-Revision: 46967
John Crispin [Wed, 16 Sep 2015 08:32:18 +0000 (08:32 +0000)]
lldpd: remove obsolete/unsupported lldpctl call
This call is no longer supported.
Maybe a come-back for it would be to use a config /etc/lldpd.conf
or /etc/lldpd.d/<some-file>.conf
Signed-off-by: Alexandru Ardelean <aa@ocedo.com>
SVN-Revision: 46966
John Crispin [Wed, 16 Sep 2015 08:32:13 +0000 (08:32 +0000)]
base-files: add /etc/profile.d support
OpenWrt should support an optional /etc/profile.d directory like
most other Linux distributions. This allows packages to install
their own scripts into /etc/profile.d/ directory.
The file suffix should make clear, that these scripts
are (sourced) shell-snippets. If the user needs e.g. php or lua,
one must make sure that the interpreter is called.
The reverse failsafe test makes sure, that the effective returncode is 0.
A typcal usecase is the inclusion of private helpers,
special variables or aliases, which at the moment needs
patching the sourcecode and is not well maintainable.
Now the builder can simply add there files.
v1 initial work of Hendrik Lüth <hendrik@linux-nerds.de>
v2 changes regarding RFC (e.g. thomas.langer@lantiq.com)
v3 changes regarding RFC (e.g. mschiffer@universe-factory.net)
v4 keep it simple and mimic OpenWrt style
Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>
SVN-Revision: 46965
John Crispin [Wed, 16 Sep 2015 08:32:01 +0000 (08:32 +0000)]
kernel: unbreak the atm abi
the lantiq dsl hack to struct atm_trafprm broke the ABI fix this by moving
the variables to the end of the struct
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 46964
John Crispin [Wed, 16 Sep 2015 08:31:52 +0000 (08:31 +0000)]
ramips: Fix pinmux functions for MT7621
The pinctrl-rt2880 code doesn't support multiple functions with the same
name. This will result in a incorrect pinmux configuration.
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 46963
John Crispin [Wed, 16 Sep 2015 08:31:45 +0000 (08:31 +0000)]
procd: update to latest git revision
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 46962
John Crispin [Wed, 16 Sep 2015 08:31:40 +0000 (08:31 +0000)]
ar71xx: Add UBNT airGateway Pro support
This patch adds kernel and userspace support for the Ubiquiti Networks airGateway Pro.
Signed-off-by: Matthew Reeve <mreeve at tenxnetworks.com>
SVN-Revision: 46961
John Crispin [Wed, 16 Sep 2015 08:31:24 +0000 (08:31 +0000)]
fstools: update to latest git revision
jffs2reset was following symlinks making it delete mounts for example.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 46960
John Crispin [Wed, 16 Sep 2015 08:31:15 +0000 (08:31 +0000)]
ramips: add mt7621/3/8 support to the I2C driver
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 46959
John Crispin [Wed, 16 Sep 2015 08:31:10 +0000 (08:31 +0000)]
ramips: fix reported vendor name
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 46958
John Crispin [Wed, 16 Sep 2015 08:31:00 +0000 (08:31 +0000)]
ramips: add proper mt7688 detection
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 46957
John Crispin [Wed, 16 Sep 2015 08:30:43 +0000 (08:30 +0000)]
ramips: add speed and mode settings to spi-mt7621
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 46956
John Crispin [Wed, 16 Sep 2015 08:30:17 +0000 (08:30 +0000)]
ramips: add get_direction() callback and irq support to gpio-mt7621
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 46955
John Crispin [Wed, 16 Sep 2015 08:30:06 +0000 (08:30 +0000)]
ramips: more m7628 pinmux fixes
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 46954
John Crispin [Wed, 16 Sep 2015 08:29:55 +0000 (08:29 +0000)]
ramips: add mt7628 pwm driver
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 46953
John Crispin [Wed, 16 Sep 2015 08:29:45 +0000 (08:29 +0000)]
ramips: make pinctrl work on newer socs
newer socs have 2 mux registers
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 46952
John Crispin [Wed, 16 Sep 2015 08:29:40 +0000 (08:29 +0000)]
ramips: make the mt7628 spi driver work for both cs lines
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 46951
John Crispin [Wed, 16 Sep 2015 08:29:31 +0000 (08:29 +0000)]
ramips: make the early_printk code detect which uart is used
only tested on mt7628
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 46950
Felix Fietkau [Wed, 16 Sep 2015 07:56:47 +0000 (07:56 +0000)]
mac80211: refresh patch
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46949
Felix Fietkau [Wed, 16 Sep 2015 07:56:41 +0000 (07:56 +0000)]
ath9k: enable hw manual peak calibration for QCA9561
This patch fix https://lists.openwrt.org/pipermail/openwrt-devel/
2015-August/034979.html. As the peak detect calibration is set
incorrectly.
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46948
Felix Fietkau [Wed, 16 Sep 2015 07:56:33 +0000 (07:56 +0000)]
omap24xx: remove obsolete kernel 3.3 patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46947
Hauke Mehrtens [Tue, 15 Sep 2015 21:58:48 +0000 (21:58 +0000)]
binutils: fix name of Binutils 2.25.1
The Binutils version 2.25.1 was not a Linaro version, but a normal
upstream Binutils version, fix the name.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Reported-by: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
SVN-Revision: 46946
Rafał Miłecki [Tue, 15 Sep 2015 16:05:10 +0000 (16:05 +0000)]
ipq806x: add platform_pre_upgrade for sysupgrade
We're in process of cleaning nand_do_platform_check. Currently is leaves
a special mark in /tmp/sysupgrade-nand-path triggering some diffent code
path in nand_upgrade_stage1. This can be a bit confusing.
The plan is to have the check function only check the image and nothing
else. Then platform code (platform_pre_upgrade) should trigger NAND
specific upgrade path. This is what this patch implements.
This follows ar71xx, lantiq and partially bcm53xx.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46945
Rafał Miłecki [Tue, 15 Sep 2015 16:05:03 +0000 (16:05 +0000)]
imx6: add platform_pre_upgrade for sysupgrade
We're in process of cleaning nand_do_platform_check. Currently is leaves
a special mark in /tmp/sysupgrade-nand-path triggering some diffent code
path in nand_upgrade_stage1. This can be a bit confusing.
The plan is to have the check function only check the image and nothing
else. Then platform code (platform_pre_upgrade) should trigger NAND
specific upgrade path. This is what this patch implements.
This follows ar71xx, lantiq and partially bcm53xx.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46944
Steven Barth [Tue, 15 Sep 2015 14:52:47 +0000 (14:52 +0000)]
ppp: use more reliable way to set script environment
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46942
Rafał Miłecki [Tue, 15 Sep 2015 11:49:33 +0000 (11:49 +0000)]
lantiq: update list on NAND devices in platform_pre_upgrade
Meanwhile BTHOMEHUBV5A board was added.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46941
Steven Barth [Tue, 15 Sep 2015 07:54:55 +0000 (07:54 +0000)]
omcproxy: use 100ms query response interval by default
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46940
John Crispin [Tue, 15 Sep 2015 06:13:07 +0000 (06:13 +0000)]
lantiq: add platform_pre_upgrade for sysupgrade
As explained in recent sysupgrade/nand.sh commits, current NAND
sysupgrade is a bit misleading because of nand_do_platform_check
behavior. It leaves a special mark in /tmp/sysupgrade-nand-path
triggering some diffent code path in nand_upgrade_stage1.
The plan is to have the check function only check the image and nothing
else. Then platform code (platform_pre_upgrade) should trigger NAND
specific upgrade path. This is what this patch implements.
Please note that because of current nand_upgrade_stage1 implementation
this patch doesn't change any behaior yet. It only prepares lantiq
target for changing nand_do_platform_check (it will be possible after
preparing all other targets as well).
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46939
John Crispin [Tue, 15 Sep 2015 06:12:55 +0000 (06:12 +0000)]
procd: update to latest git revision
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 46938
John Crispin [Tue, 15 Sep 2015 06:12:42 +0000 (06:12 +0000)]
libubox: update to latest git revision
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 46937
John Crispin [Tue, 15 Sep 2015 06:12:34 +0000 (06:12 +0000)]
procd: rework makefile, split ujail/seccomp
this need to be applied after my work on ujail (procd git)
ujail doesn't depend on seccomp and some archs dont support seccomp
Signed-off-by: Etienne CHAMPETIER <champetier.etienne@gmail.com>
SVN-Revision: 46936
John Crispin [Mon, 14 Sep 2015 20:12:21 +0000 (20:12 +0000)]
mountd: move code to a git repo
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 46935
John Crispin [Mon, 14 Sep 2015 20:12:16 +0000 (20:12 +0000)]
ar71xx: add TP-LINK TL-WDR3320 v2 support
This patch adds support for TP-LINK TL-WDR3320 v2.
This router uses a chinese version 2 firmware header,.
Signed-off-by: Weijie Gao <hackpascal@gmail.com>
SVN-Revision: 46934
John Crispin [Mon, 14 Sep 2015 20:12:00 +0000 (20:12 +0000)]
ar71xx: extract ath10k wifi board.bin for the OpenMesh MR1750 board
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 46933
John Crispin [Mon, 14 Sep 2015 20:11:51 +0000 (20:11 +0000)]
ar71xx: create profile and build image for the OpenMesh MR1750 board
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 46932
John Crispin [Mon, 14 Sep 2015 20:11:43 +0000 (20:11 +0000)]
package/uboot-envtools: add OpenMesh MR1750 support
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 46931
John Crispin [Mon, 14 Sep 2015 20:11:35 +0000 (20:11 +0000)]
package/om-watchdog: add OpenMesh MR1750 support
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 46930
John Crispin [Mon, 14 Sep 2015 20:11:24 +0000 (20:11 +0000)]
ar71xx: enable sysupgrade for the OpenMesh MR1750
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 46929
John Crispin [Mon, 14 Sep 2015 20:11:18 +0000 (20:11 +0000)]
scripts/om-fwupgradecfg-gen.sh: add support for the MR1750
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 46928
John Crispin [Mon, 14 Sep 2015 20:11:01 +0000 (20:11 +0000)]
ar71xx: add user-space support for the OpenMesh MR1750 board
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 46927
John Crispin [Mon, 14 Sep 2015 20:10:43 +0000 (20:10 +0000)]
ar71xx: add kernel support for the OpenMesh MR1750 board
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 46926
John Crispin [Mon, 14 Sep 2015 20:10:10 +0000 (20:10 +0000)]
scripts/om-fwupgradecfg-gen.sh: Fix u-boot image md5sum check
The u-boot on Open Mesh devices checks the whole transfered image against a
md5sum. This is stored inside the option filemd5sum inside the
fwupgrade.cfg. The bootloader will not check it when this setting is
missing and could therefore write invalid images to the flash.
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 46925
John Crispin [Mon, 14 Sep 2015 20:10:04 +0000 (20:10 +0000)]
realview: create sd card image for qemu
enables a real rootfs with custom size
use qemu with:
qemu-system-arm -M realview-pbx-a9 \
-kernel openwrt-realview-vmlinux.elf \
-nographic -m 1024M \
-sd openwrt-realview-sdcard.img \
--append "console=ttyAMA0 root=/dev/mmcblk0p1"
modified script from brcm2708 target
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 46924
John Crispin [Mon, 14 Sep 2015 20:09:56 +0000 (20:09 +0000)]
realview: enable sd card support
qemu can be run with -sd <imagename>
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 46923
John Crispin [Mon, 14 Sep 2015 20:09:40 +0000 (20:09 +0000)]
ar71xx: assign proper GPIO pin for Ubiquiti Nanostation models
The GPIO pins for "POE passthrough" of Ubiquiti Nanostation models are the
following:
* Ubiquiti Nanostation M XM: Pin 8
* Ubiquiti Nanostation M XW: Pin 2
The previous definition of the pins was mixed up between XM and XW model.
Signed-off-by: Lars Kruse <lists@sumpfralle.de>
SVN-Revision: 46922
John Crispin [Mon, 14 Sep 2015 20:09:31 +0000 (20:09 +0000)]
ramips: Added WIZnet WizFi630A Platform based on Ralink RT5350
This patch is to add the WIZnet WizFi630A board as a new platform. The board is in mini pci express form factor.
Signed-off-by: Tobias Welz <tw@wiznet.eu>
SVN-Revision: 46921
John Crispin [Mon, 14 Sep 2015 20:09:22 +0000 (20:09 +0000)]
lantiq: Update to the latest DSL driver / application versions
Thanks to Sylwester Petela for testing my patch (successfully on an
ADSL connection) and for pointing out some configuration mistakes.
Others (including me) have also successfully tested this extensively
on VDSL connections.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 46920
John Crispin [Mon, 14 Sep 2015 20:09:06 +0000 (20:09 +0000)]
base-files: sysupgrade: quote source image name
get_image() eval a filename without quoting it, resulting in errors with
filenames containing characters that need to be escaped.
$ sysupgrade -T -f ./cfg\(12\).tar.gz img.bin; echo $?
Image check 'platform_check_image' failed.
Invalid config file. Please use only .tar.gz files
1
$ mv cfg\(12\).tar.gz cfg_12.tar.gz
$ mv img\(1\).bin img.bin
sysupgrade -T -f ./cfg_12.tar.gz img.bin; echo $?
0
Enclose the content of $from in double quotes.
Signed-off-by: Adrien Schildknecht <adrien+dev@schischi.me>
SVN-Revision: 46919
John Crispin [Mon, 14 Sep 2015 20:08:55 +0000 (20:08 +0000)]
ramips: add support for Planex DB-WRT01
This patch add support for Planex DB-WRT01. DANBOARD route on
the MT7620A SoC with two Ethernet port and a 802.11n 2.4 GHz radio.
DANBOARD is Cartoon character.
Signed-off-by: YuheiOKAWA <tochiro.srchack@gmail.com>
SVN-Revision: 46918
John Crispin [Mon, 14 Sep 2015 20:08:39 +0000 (20:08 +0000)]
lantiq: get more status information from xDSL
Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com>
Signed-off-by: Helge Mader <hmader@tdt.de>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Andre Heider <a.heider@gmail.com>
SVN-Revision: 46917
John Crispin [Mon, 14 Sep 2015 20:08:25 +0000 (20:08 +0000)]
kernel: dwc2: Add missing config symbol definition
DWC2 driver has config symbol CONFIG_USB_DWC2_DEBUG_PERIODIC which
should be defined for the module build.
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
SVN-Revision: 46916
John Crispin [Mon, 14 Sep 2015 20:08:15 +0000 (20:08 +0000)]
lantiq: Add AR9 compatibility bits to DWC2 driver
Add AR9 DTS definition to be recognized by the DWC2 driver.
The same driver parameters can be mostly used except that some boards
seem to erroneously report OTG HNP/SRP capability of the USB HCD.
Forcing the HNP/SRP off allows these boards to work with the DWC2 as well.
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
SVN-Revision: 46915
John Crispin [Mon, 14 Sep 2015 20:08:07 +0000 (20:08 +0000)]
lantiq: Introduce DWC2 compatible DTS definitions for AR9 USB
Since the AR9 USB is very similar to the VR9 USB it too can be used with
the upstream DWC2 driver.
Here are the DTS definitions which make it compatible with the DWC2
driver.
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
SVN-Revision: 46914
John Crispin [Mon, 14 Sep 2015 20:07:23 +0000 (20:07 +0000)]
lantiq: Initialize USB on AR9 platform
Based on the ltq-hcd driver the AR9 USB can be initialized the same way
as the VR9 platform. Use the same initialization bits for both
platforms.
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
SVN-Revision: 46913
Jo-Philipp Wich [Mon, 14 Sep 2015 16:57:03 +0000 (16:57 +0000)]
imagebuilder: store package lists in cache directory
Force opkg to store the downloaded repository indizes into the cache
directory as well, this way the IB can be used in an offline setting
once all required files have been cached.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 46912
Jo-Philipp Wich [Mon, 14 Sep 2015 16:56:40 +0000 (16:56 +0000)]
opkg: expose lists_dir option as command line argument
Expose the "lists_dir" configuration file option as command line
switch so that we can override it for the Image Builder environment.
Also add a more standard PKG_MAINTAINER variable while touching
the Makefile.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 46911
Jo-Philipp Wich [Mon, 14 Sep 2015 15:15:15 +0000 (15:15 +0000)]
tools/make-ext4fs: prefer static linking
Link zlib statically on Linux systems.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 46909
Jo-Philipp Wich [Mon, 14 Sep 2015 14:51:07 +0000 (14:51 +0000)]
tools/mtd-utils: prefer static linking
- Add patch for optional static linking preference
- Prefer static linking on Linux systems
- Enable verbose compiler messages when building with V=c
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 46908
Jo-Philipp Wich [Mon, 14 Sep 2015 14:03:21 +0000 (14:03 +0000)]
tools/xz: disable shared library
Force a static build of the xz utilities in order to avoid the dependency on a
shared liblzma.so which might collide with the distro version.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 46907
Rafał Miłecki [Mon, 14 Sep 2015 07:40:40 +0000 (07:40 +0000)]
include: toplevel: drop unused OPENWRTVERSION variable
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46906
Felix Fietkau [Mon, 14 Sep 2015 06:54:15 +0000 (06:54 +0000)]
ramips: fix chunked-io support for big flash chips (#20504)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46904
Felix Fietkau [Mon, 14 Sep 2015 06:51:10 +0000 (06:51 +0000)]
mac80211/hostapd: rework 802.11w driver support selection, do not hardcode drivers in hostapd makefile
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46903
Felix Fietkau [Sun, 13 Sep 2015 20:44:09 +0000 (20:44 +0000)]
ath10k: reduce dma burst size on newer firmware to fix crashes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46900
Steven Barth [Sun, 13 Sep 2015 18:02:54 +0000 (18:02 +0000)]
toplevel: fix release name
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46899
projects / openwrt / staging / nbd.git / log