Felix Fietkau [Sun, 4 May 2014 23:26:20 +0000 (23:26 +0000)]
ar71xx/ath9k: fix reading the WMAC revision on AR953x (fixes #15581)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40695
Felix Fietkau [Sat, 3 May 2014 21:18:53 +0000 (21:18 +0000)]
mac80211: remove obsolete check for enable_ht
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40694
Felix Fietkau [Sat, 3 May 2014 21:14:59 +0000 (21:14 +0000)]
mac80211: remove mode_11n variable for hwmode - the option only selects the band now
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40693
Felix Fietkau [Sat, 3 May 2014 21:14:56 +0000 (21:14 +0000)]
ath: Add config option for DFS support
This patch adds a config option to enable DFS in ath9k and ath10k
drivers (with ath10k you need the AP-branch firmware). I'm not entirely
sure about the regulatory compliance issues, though. As far as I
understand, enabling the DFS_CERTIFIED config options implies that the
device is certified for DFS. No doubt the original firmware has obtained
such a certification, but not with the open source drivers. I suppose
that as long as this is disabled in default builds (like ATH_USER_REGD)
everything should be fine, but it would be nice to have out-of-the-box
OpenWrt support for DFS. I'm also not sure whether the description of
the configuration option should say something about regulatory compliance.
Signed-off-by: Matti Laakso <malaakso@elisanet.fi>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40692
Felix Fietkau [Sat, 3 May 2014 21:14:52 +0000 (21:14 +0000)]
ath5k: merge a tx power handling fix
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40691
Felix Fietkau [Sat, 3 May 2014 21:14:48 +0000 (21:14 +0000)]
hostapd: add an option for 802.11h (enabled by default)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40690
Felix Fietkau [Sat, 3 May 2014 21:14:45 +0000 (21:14 +0000)]
mac80211: restrict ath9k/ath10k DFS support to ETSI
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40689
Felix Fietkau [Sat, 3 May 2014 21:14:41 +0000 (21:14 +0000)]
mac80211: enable CFG80211_CERTIFICATION_ONUS by default
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40688
Felix Fietkau [Sat, 3 May 2014 21:14:38 +0000 (21:14 +0000)]
ath9k: merge a few upstream fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40687
Felix Fietkau [Sat, 3 May 2014 19:58:54 +0000 (19:58 +0000)]
mac80211: add support for htmode=VHT20
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40686
Felix Fietkau [Sat, 3 May 2014 18:50:06 +0000 (18:50 +0000)]
mac80211: force upper channel for HT40 when autochannel is enabled
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40685
Felix Fietkau [Sat, 3 May 2014 18:44:32 +0000 (18:44 +0000)]
mac80211: add automatic ht40 mode handling for 2.4 ghz
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40684
Felix Fietkau [Sat, 3 May 2014 18:38:24 +0000 (18:38 +0000)]
mac80211: clean up vht capability processing
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40683
Felix Fietkau [Sat, 3 May 2014 18:38:20 +0000 (18:38 +0000)]
mac80211: clean up ht capability handling, drop the use of the ht_capab list, use individual variables instead
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40682
Felix Fietkau [Sat, 3 May 2014 18:38:16 +0000 (18:38 +0000)]
mac80211: disable 802.11n support if htmode is not set to HT* or VHT*
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40681
Felix Fietkau [Sat, 3 May 2014 18:38:09 +0000 (18:38 +0000)]
mac80211: simplify HT40 handling, derive lower/upper channel mode automatically from channel index
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40680
Zoltan Herpai [Sat, 3 May 2014 14:56:25 +0000 (14:56 +0000)]
mxs: rename files so that profiles are sorted alphabetically
While at it, make spelling at little bit more consistent,
at least for my taste :-)
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
SVN-Revision: 40679
Zoltan Herpai [Sat, 3 May 2014 14:37:02 +0000 (14:37 +0000)]
mxs: fix typo in patch filename
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
SVN-Revision: 40678
Hauke Mehrtens [Fri, 2 May 2014 22:57:39 +0000 (22:57 +0000)]
kernel: net-rtl8188eu depends on kmod-usbcore
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 40668
Hauke Mehrtens [Fri, 2 May 2014 22:57:09 +0000 (22:57 +0000)]
omap: fix usb dependencies
There are some problems in the dependencies of the usb modules
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 40667
Hauke Mehrtens [Fri, 2 May 2014 22:56:33 +0000 (22:56 +0000)]
kernel: fix dependency to xor-neon.ko
If this module gets build the xor module depends on it
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 40666
Hauke Mehrtens [Fri, 2 May 2014 22:55:55 +0000 (22:55 +0000)]
kernel: omap: omap-des.ko is not available in kernel 3.13
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 40665
Felix Fietkau [Fri, 2 May 2014 21:18:02 +0000 (21:18 +0000)]
toolchain/gcc: update linaro-gcc-4.8 to 2014.04
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40664
Hauke Mehrtens [Fri, 2 May 2014 21:13:21 +0000 (21:13 +0000)]
kernel: unify the two kmod-usb-mxs-phy packages
There are two packages with the name kmod-usb-mxs-phy in OpenWrt which
causes warnings on every build.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 40663
Hauke Mehrtens [Fri, 2 May 2014 21:10:35 +0000 (21:10 +0000)]
kernel: make b44 depend on libphy for kernel 3.14
In kernel 3.14 a dependency to libphy was added to b44.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 40662
Hauke Mehrtens [Fri, 2 May 2014 21:08:22 +0000 (21:08 +0000)]
kernel: add missing config options
These options are missing and were spotted by the buildbots.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 40661
Felix Fietkau [Fri, 2 May 2014 18:12:28 +0000 (18:12 +0000)]
netifd: update to the latest version, fixes some corner cases related to hotplug device handling
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40660
Hauke Mehrtens [Thu, 1 May 2014 21:17:56 +0000 (21:17 +0000)]
samaba36: do not build libtevent
This fixes a build error on some mips systems.
This closes #15769.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 40652
Zoltan Herpai [Thu, 1 May 2014 18:49:58 +0000 (18:49 +0000)]
octeon/mpc83xx: remove CONFIG_NETWORK_FILESYSTEMS override
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 40642
Hauke Mehrtens [Thu, 1 May 2014 16:49:13 +0000 (16:49 +0000)]
kernel: add support for USB_NET_CDC_EEM and USB_NET_CDC_SUBSET
needed for Android USB Tethering
Signed-off-by: Ulrich Weber <uw@ocedo.com>
SVN-Revision: 40634
Hauke Mehrtens [Thu, 1 May 2014 16:24:56 +0000 (16:24 +0000)]
kernel: Add kernel module for cramfs support.
This patch adds support for building support for cramfs filesystems as a kernel module.
Signed-off-by: Owen Kirby <osk@exegin.com>
SVN-Revision: 40631
Hauke Mehrtens [Thu, 1 May 2014 14:04:15 +0000 (14:04 +0000)]
cyassl: update to version 3.0.0
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 40621
Hauke Mehrtens [Thu, 1 May 2014 13:07:44 +0000 (13:07 +0000)]
kernel: fix compile error with gcc-4.8 and kernel 3.3
With gcc-4.8 I get a compile error with kernel 3.3.
This patch fixes this problem by backporting a patch from a more recent kernel version.
CC arch/mips/mm/page.o
arch/mips/mm/page.c:89:6: error: 'clear_page' alias in between function and variable is not supported
void clear_page(void *page) __attribute__((alias("clear_page_array")));
^
arch/mips/mm/page.c:84:12: error: 'clear_page_array' aliased declaration [-Werror]
static u32 clear_page_array[0x120 / 4];
^
arch/mips/mm/page.c:108:6: error: 'copy_page' alias in between function and variable is not supported
void copy_page(void *to, void *from) __attribute__((alias("copy_page_array")));
^
arch/mips/mm/page.c:102:12: error: 'copy_page_array' aliased declaration [-Werror]
static u32 copy_page_array[0x540 / 4];
^
arch/mips/mm/page.c:108:6: error: 'copy_page' alias in between function and variable is not supported
void copy_page(void *to, void *from) __attribute__((alias("copy_page_array")));
^
arch/mips/mm/page.c:102:12: error: 'copy_page_array' aliased declaration [-Werror]
static u32 copy_page_array[0x540 / 4];
^
arch/mips/mm/page.c:89:6: error: 'clear_page' alias in between function and variable is not supported
void clear_page(void *page) __attribute__((alias("clear_page_array")));
^
arch/mips/mm/page.c:84:12: error: 'clear_page_array' aliased declaration [-Werror]
static u32 clear_page_array[0x120 / 4];
^
cc1: all warnings being treated as errors
make[7]: *** [arch/mips/mm/page.o] Error 1
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 40619
Hauke Mehrtens [Thu, 1 May 2014 12:17:52 +0000 (12:17 +0000)]
samba: update to version 3.6.23
This updates samba to the most recent minor version.
This patch is based on a patch by Anton van Bohemen <avbohemen@ziggo.nl>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 40618
Zoltan Herpai [Thu, 1 May 2014 10:23:55 +0000 (10:23 +0000)]
sunxi: various a13 changes - add rtl8192cu into A13 Olinuxino profile - make wlan0 the default interface
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 40617
Zoltan Herpai [Thu, 1 May 2014 10:02:43 +0000 (10:02 +0000)]
sunxi: add rtl8192cu to pcDuino profile
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 40616
Zoltan Herpai [Thu, 1 May 2014 09:55:03 +0000 (09:55 +0000)]
mac80211: add TMSC firmware to 8192cu module to properly support 8188CUS
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 40615
Hauke Mehrtens [Wed, 30 Apr 2014 22:15:40 +0000 (22:15 +0000)]
xtables-addons: #15516 Fix compile under linux 3.14
Add compatibility inline function.
Signed-off-by: Jan Kardell <jan.kardell@telliq.com>
SVN-Revision: 40613
Zoltan Herpai [Wed, 30 Apr 2014 22:04:34 +0000 (22:04 +0000)]
sunxi: add default network config for missing boards
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 40612
Zoltan Herpai [Wed, 30 Apr 2014 21:54:47 +0000 (21:54 +0000)]
sunxi: add rtl8188eu into pcduino v3 profile
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 40610
Zoltan Herpai [Wed, 30 Apr 2014 21:53:29 +0000 (21:53 +0000)]
kernel: add staging r8188eu module (3.13)
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 40609
Zoltan Herpai [Wed, 30 Apr 2014 19:50:15 +0000 (19:50 +0000)]
sunxi: add board support for LinkSprite pcDuino v3
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 40606
Zoltan Herpai [Wed, 30 Apr 2014 19:37:56 +0000 (19:37 +0000)]
uboot-sunxi: add support for LinkSprite pcDuino v3 (a20)
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 40605
Steven Barth [Wed, 30 Apr 2014 15:52:30 +0000 (15:52 +0000)]
odhcp6c: add preliminary support for MAP provisioning
SVN-Revision: 40604
Hauke Mehrtens [Tue, 29 Apr 2014 21:03:00 +0000 (21:03 +0000)]
kernel: add missing config options
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 40599
Hauke Mehrtens [Tue, 29 Apr 2014 21:02:40 +0000 (21:02 +0000)]
at91: Add AT91 board and model name to /tmp/sysinfo
From
9158e3282db592e78fb32a2c8a0903ef21b97f5c Mon Sep 17 00:00:00 2001
From: Owen Kirby <osk@exegin.com>
Date: Fri, 11 Apr 2014 18:28:56 -0700
Subject: [PATCH 3/3] [at91] Add AT91 board and model name to /tmp/sysinfo.
This patch extracts the board name and model information from the /proc/device-tree
node in order to provide something a little more friendly on the LuCI sysinfo page
than just "AT91SAM9 (Device Tree)"
Signed-off-by: Owen Kirby <osk@exegin.com>
SVN-Revision: 40598
Hauke Mehrtens [Tue, 29 Apr 2014 21:02:05 +0000 (21:02 +0000)]
at91: AT91SAM9G20-EK fixes
From
272f548fe8d0b811e0589e535f650f0507f6bccd Mon Sep 17 00:00:00 2001
From: Owen Kirby <osk@exegin.com>
Date: Fri, 11 Apr 2014 17:59:55 -0700
Subject: [PATCH 2/3] [at91] AT91SAM9G20-EK fixes.
While testing the 3.10 kernel update, I found that the out-of-the-box device tree for the
the AT91SAM9G20EK uses a UBIFS rootfs and stores the DTB separately from the zImage.
Signed-off-by: Owen Kirby <osk@exegin.com>
SVN-Revision: 40597
Hauke Mehrtens [Tue, 29 Apr 2014 21:00:50 +0000 (21:00 +0000)]
Update AT91 kernel to 3.10.34
From
2064e6d069ec8df7f5e988547fe7f2a1a7ad890f Mon Sep 17 00:00:00 2001
From: Owen Kirby <osk@exegin.com>
Date: Thu, 10 Apr 2014 19:02:15 -0700
Subject: [PATCH 1/3] [at91] Update AT91 kernel to 3.10.34.
This patch updates the kernel of the AT91 target to version 3.10.34.
Signed-off-by: Owen Kirby <osk@exegin.com>
SVN-Revision: 40596
Felix Fietkau [Tue, 29 Apr 2014 16:19:36 +0000 (16:19 +0000)]
atheros: remove useless get_c0_compare_int fix
Remove get_c0_compare_int fix which is useless for latest kernels.
Tested on Ubnt Bullet2, which could successfully boot without this
workaround.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 40593
Felix Fietkau [Tue, 29 Apr 2014 15:52:12 +0000 (15:52 +0000)]
cns3xxx: ethernet - revert: clean up tx descs only when needed
This reverts commit
0772ab938c0aedd7f4cc7127059d6ce8cf929dfa.
Trying to optimize calls to eth_complete_tx in this fasion causes a regression
where when sending only the tx queue can get disabled until a packet is
received. This original call to eth_schedule_poll() is scheduled so it
should not cause a performance issue.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 40592
Felix Fietkau [Tue, 29 Apr 2014 15:52:08 +0000 (15:52 +0000)]
ath9k: merge a fix for a race condition on init
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40591
Felix Fietkau [Tue, 29 Apr 2014 15:52:03 +0000 (15:52 +0000)]
ath9k: merge fixes for stability issues under heavy load
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40590
Felix Fietkau [Tue, 29 Apr 2014 13:18:59 +0000 (13:18 +0000)]
netifd: update to the latest version, fixes a use-after-free bug on wireless config reload
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40589
Hauke Mehrtens [Mon, 28 Apr 2014 21:40:09 +0000 (21:40 +0000)]
kernel: deactivate fs cache config option
r40587 added some kernel config options, on which these two ones depend.
This fixes the build of the buildbots.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 40588
Zoltan Herpai [Mon, 28 Apr 2014 19:47:38 +0000 (19:47 +0000)]
fs: add kernel modules for AFS client
- add/separate crypto modules
- add fscache support
- add rxrpc module which is required for AFS
- add afs module
Signed-Off-By: Nathaniel Wesley Filardo <8S9K8UGO5JGPI3U067229BBACKMQIGVH@cmx.ietfng.org>
Acked-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 40587
Felix Fietkau [Mon, 28 Apr 2014 16:35:25 +0000 (16:35 +0000)]
ath9k: add a fix for tx queueing and aggregation
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40586
Zoltan Herpai [Mon, 28 Apr 2014 07:43:29 +0000 (07:43 +0000)]
mxs: enable usbgadget feature for Duckbills
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Acked-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 40585
Hauke Mehrtens [Sun, 27 Apr 2014 21:53:58 +0000 (21:53 +0000)]
mac80211: Fix build errors due to missing string function declarations
Building mac80211 failed, due to missing function declarations in compat/backport-3.15.c
This patch adds the linux/string.h header file to provide these function declarations
Signed-off-by: Maarten Bezemer <maarten.bezemer@gmail.com>
SVN-Revision: 40584
Hauke Mehrtens [Sun, 27 Apr 2014 20:49:14 +0000 (20:49 +0000)]
authsae: Update to latest version
Ping tested, add a cool fix
https://github.com/cozybit/authsae/commit/
295164a83717ce59ca280468fc2f7edcea6b3cbf
Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr>
SVN-Revision: 40579
Felix Fietkau [Sun, 27 Apr 2014 18:48:57 +0000 (18:48 +0000)]
base-files: remove duplicate stop_service() function.
It was introduced in commit
2f966e8, "base-files: add a post start hook
for procd managed services".
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 40576
Felix Fietkau [Sun, 27 Apr 2014 18:30:50 +0000 (18:30 +0000)]
hostapd: fix eglibc 2.15 support
This patch fixes compilation failure for hostapd when using eglibc 2.15.
Signed-off-by: Zachery Stoddard <zacherystoddard@gmail.com>
SVN-Revision: 40575
Felix Fietkau [Sun, 27 Apr 2014 14:39:06 +0000 (14:39 +0000)]
ath9k: add ANI fix for ar913x to improve stability
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40573
Felix Fietkau [Sat, 26 Apr 2014 19:48:11 +0000 (19:48 +0000)]
netifd: update to the latest version, fixes some route table and dynamic interface issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40572
Felix Fietkau [Sat, 26 Apr 2014 19:48:06 +0000 (19:48 +0000)]
hostapd: update to version 2014-04-24, fixes some dfs related issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40571
Felix Fietkau [Sat, 26 Apr 2014 14:56:29 +0000 (14:56 +0000)]
libubox: update to the latest version, adds a key/value store implementation and fixes an uloop issue
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40570
Felix Fietkau [Thu, 24 Apr 2014 19:41:57 +0000 (19:41 +0000)]
build: clarify the file prereq check message
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40569
Felix Fietkau [Thu, 24 Apr 2014 19:28:11 +0000 (19:28 +0000)]
build: add a prereq check for file (#15692)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40568
Steven Barth [Thu, 24 Apr 2014 09:36:01 +0000 (09:36 +0000)]
odhcpd: better dhcpv6 client-compatibility (thanks Hans Dedecker)
SVN-Revision: 40567
Steven Barth [Thu, 24 Apr 2014 09:11:44 +0000 (09:11 +0000)]
6rd: Select first IPv4 address from configured tunlink interface as local tunnel address
Gives the user the control to select the correct WAN IPv4 address to be used by the 6rd tunnel when mutiple WAN interfaces are configured
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
SVN-Revision: 40566
Hauke Mehrtens [Wed, 23 Apr 2014 22:02:18 +0000 (22:02 +0000)]
bcm53xx: add default config for switch
This scripts adds a default config for the switch.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 40565
Hauke Mehrtens [Wed, 23 Apr 2014 21:53:50 +0000 (21:53 +0000)]
bcm53xx: add initial support for kernel 3.14
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 40564
John Crispin [Wed, 23 Apr 2014 07:52:56 +0000 (07:52 +0000)]
ralink: add dir-645 to the eeprom hotplug script
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40561
John Crispin [Wed, 23 Apr 2014 07:52:47 +0000 (07:52 +0000)]
mac80211: allow to select the rt2x00-soc module for the ramips/rt3883 subtarget
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40560
John Crispin [Wed, 23 Apr 2014 07:52:37 +0000 (07:52 +0000)]
mac80211: refresh rt2x00 patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40559
John Crispin [Wed, 23 Apr 2014 07:52:18 +0000 (07:52 +0000)]
mac80211: rt2x00: add support for the RT3662/RT3883 SoCs
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40558
John Crispin [Wed, 23 Apr 2014 07:51:57 +0000 (07:51 +0000)]
ramips: register clock device for the WMAC on RT3883
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40557
Felix Fietkau [Tue, 22 Apr 2014 17:28:14 +0000 (17:28 +0000)]
netifd: update to latest version, adds support for disabling interfaces
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40555
John Crispin [Tue, 22 Apr 2014 08:08:51 +0000 (08:08 +0000)]
ramips: Add support for the 7Links PX-4885 wireless router.
The 7Links PX-4885 is a small battery-powered wireless router.
It is based on a RT5350F WiSoC and features one ethernet port and one
USB port. It is a Hame MPR-A1 clone, except it has different GPIOs,
a different battery and more RAM (32 MB).
This patch adds a profile for this board, the corresponding device tree
file and the adequate base-files changes (incl. sysupgrade).
Signed-off-by: Hugo Grostabussiat <bonstra@bonstra.fr.eu.org>
SVN-Revision: 40554
John Crispin [Tue, 22 Apr 2014 08:08:46 +0000 (08:08 +0000)]
lantiq: BT Home Hub 2B - overlayfs on top of ubi
BT Home Hub 2B: use overlayfs on top of ubi.
Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>
SVN-Revision: 40553
John Crispin [Tue, 22 Apr 2014 08:08:42 +0000 (08:08 +0000)]
ramips: build factory-compatible image for AR725W
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 40552
John Crispin [Tue, 22 Apr 2014 08:08:39 +0000 (08:08 +0000)]
firmware-utils: add Gemtek header tool
Generates webflash-compatible images for a few RT2880 routers based
on Gemtek OEM boards.
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 40551
John Crispin [Tue, 22 Apr 2014 08:08:35 +0000 (08:08 +0000)]
ramips: add Airlink101 AR725W userland support
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 40550
John Crispin [Tue, 22 Apr 2014 08:08:31 +0000 (08:08 +0000)]
ramips: Add Airlink101 AR725W board support
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 40549
John Crispin [Tue, 22 Apr 2014 08:08:27 +0000 (08:08 +0000)]
Add Zyxel P-2812HNU-Fx images
P-2812HNU-Fx images are already supported but not generated.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 40548
John Crispin [Tue, 22 Apr 2014 08:08:23 +0000 (08:08 +0000)]
Add Fritz!Box 3370 images
Fritz!Box 3370 images are already supported but not generated.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 40547
John Crispin [Tue, 22 Apr 2014 08:08:19 +0000 (08:08 +0000)]
Refresh patches
Refresh uboot-lantiq patches.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 40546
John Crispin [Tue, 22 Apr 2014 08:08:15 +0000 (08:08 +0000)]
Create firmware directory if it doesn't exist
Fixes package refreshing.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 40545
John Crispin [Tue, 22 Apr 2014 08:08:10 +0000 (08:08 +0000)]
Depend on lantiq board
Depend on lantiq board.
ARV7510 depends on ARV4510 because (according to OpenWrt wiki) both boards are identical except for the unsupported WiFi. Moreover, ARV7510 isn't especifically supported and ARV4510 images valid.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 40544
John Crispin [Tue, 22 Apr 2014 08:08:06 +0000 (08:08 +0000)]
Fix vr9_phy22f_a2x.bin firmware linking
vr9_phy22f_a2x.bin needs to be linked in order to get ethernet support.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 40543
John Crispin [Tue, 22 Apr 2014 08:08:02 +0000 (08:08 +0000)]
linux/generic: add MIB counters and port status to ADM6996 switch
This patch adds port status information and MIB counters to the ADM6996
switch driver.
The driver supports also the older ADM6996L-variant, but I'm not able to
test this patch on that chip. According to the datasheet the same
registers exist there as well, so I think it should work, but any
feedback is appreciated.
Signed-off-by: Matti Laakso <malaakso at elisanet.fi>
SVN-Revision: 40542
John Crispin [Tue, 22 Apr 2014 08:07:53 +0000 (08:07 +0000)]
lantiq: fix maximum ethernet header length
The total ethernet frame length should be written to the hardware
register LTQ_ETOP_IGPLEN instead of just the value of the MTU. This
patch fixes network issues on various Danube boards, especially when
VLAN tagging is enabled.
Signed-off-by: Matti Laakso <malaakso at elisanet.fi>
SVN-Revision: 40541
Zoltan Herpai [Mon, 21 Apr 2014 18:16:03 +0000 (18:16 +0000)]
add missing symbols in prepping for afs patchset
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 40540
Zoltan Herpai [Mon, 21 Apr 2014 18:14:17 +0000 (18:14 +0000)]
add missing symbols in prepping for afs patchset
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 40539
Zoltan Herpai [Mon, 21 Apr 2014 18:13:19 +0000 (18:13 +0000)]
add missing symbols in prepping for afs patchset
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 40538
Luka Perkov [Sat, 19 Apr 2014 21:39:12 +0000 (21:39 +0000)]
scons: upgrade to 2.3.1
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 40535
Luka Perkov [Sat, 19 Apr 2014 21:39:11 +0000 (21:39 +0000)]
mpc: upgrade to 1.0.2
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 40534
Luka Perkov [Sat, 19 Apr 2014 21:39:10 +0000 (21:39 +0000)]
flex: upgrade to version 2.5.39
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 40533
Luka Perkov [Sat, 19 Apr 2014 21:39:09 +0000 (21:39 +0000)]
kobs-ng: Add support for overriding size
By default kobs-ng will use the size of /dev/mtd0 for the IMX bootstreams.
This patch allows overriding that size in order to reserve space at the end
of the mtd partition for u-boot.img in the case of using an SPL bootloader.
For example, to flash an SPL bootloader that loads u-boot.img from 0xe0000
(14MB) offset in a 16MB /dev/mtd0:
kobs-ng init -v -x --search_exponent=1 --chip_0_size=0xe00000 SPL
nandwrite --start=0xe00000 --pad /dev/mtd0 u-boot.img
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 40532
Luka Perkov [Sat, 19 Apr 2014 21:39:04 +0000 (21:39 +0000)]
imx6-gateworks: enable new canbus packages
The canbus package was recently changed to a more active project. This patch
updates the default package names to include the same functionality as before.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 40531
Felix Fietkau [Sat, 19 Apr 2014 17:26:11 +0000 (17:26 +0000)]
feeds.conf.default: the telephony feed is now on git.openwrt.org
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40530
projects / openwrt / staging / ansuel.git / log