Felix Fietkau [Thu, 25 Feb 2016 09:24:31 +0000 (09:24 +0000)]
dnsmasq: export tftp root to the procd jail
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48761
Felix Fietkau [Thu, 25 Feb 2016 09:24:24 +0000 (09:24 +0000)]
dnsmasq: only enable tftp if the tftp root exists
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48760
Felix Fietkau [Thu, 25 Feb 2016 09:24:13 +0000 (09:24 +0000)]
mac80211: fix an RTS/CTS issue in minstrel_ht
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48759
Felix Fietkau [Thu, 25 Feb 2016 09:24:09 +0000 (09:24 +0000)]
mac80211: sync a-msdu tx patch with the latest upstream submission
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48758
Zoltan Herpai [Wed, 24 Feb 2016 23:31:48 +0000 (23:31 +0000)]
sunxi: add descriptor files for wifi+bt modules (AP6181/6210), add brcmfmac to bananapro profile
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 48757
Rafał Miłecki [Wed, 24 Feb 2016 22:43:43 +0000 (22:43 +0000)]
kernel: replace bgmac patches for BCM47094 with final ones
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48756
Rafał Miłecki [Wed, 24 Feb 2016 22:43:16 +0000 (22:43 +0000)]
kernel: mtdsplit: support uimage with UBI
This patch adds uimage firmware split support for ubi.
Signed-off-by: YounJae Rho <luxflow@live.com>
SVN-Revision: 48755
Rafał Miłecki [Tue, 23 Feb 2016 14:40:40 +0000 (14:40 +0000)]
kernel: mtdsplit: add missing digest field to Seama header
Seama format has 2 similar headers: container (seal) header and entity
header. The first one has size always set to 0 and doesn't contain MD5
digest.
When dealing with Seama on a flash we deal directly with an entity. You
can see mtdsplit_parse_seama reads from offset 0 and expects entity to
be there. Seama container is used by bootloader / interface only which
extract entity out of it and flash it.
That said we should fix our header struct. This is important as we
calculate possible rootfs offset assuming it may be placed right after
Seama entity. So far calculate offset was always 16B too low.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48754
Felix Fietkau [Mon, 22 Feb 2016 15:11:23 +0000 (15:11 +0000)]
ar71xx: reset ethernet tx ring on fast reset to prevent packet loss / irq issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48753
Felix Fietkau [Mon, 22 Feb 2016 08:54:46 +0000 (08:54 +0000)]
ustream-ssl: update to the latest version, fixes openssl TLS version selection
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48752
Felix Fietkau [Mon, 22 Feb 2016 08:54:32 +0000 (08:54 +0000)]
ramips: fix WSR-1166 partition table
- Fix typo in board_data partition start address
- Increase board_data partition size in order to exploit all flash size
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
SVN-Revision: 48751
Felix Fietkau [Mon, 22 Feb 2016 08:54:08 +0000 (08:54 +0000)]
mac80211: add packages libertas-spi module and firmware
This adds option to build kernel module and firmware packages
for a Marvell 8686 SPI Wireless device
Signed-off-by: Joseph Honold <mozzwald@gmail.com>
SVN-Revision: 48750
John Crispin [Fri, 19 Feb 2016 16:38:04 +0000 (16:38 +0000)]
ralink: fix mt7628 ehci support
the u2_phy init was missing
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 48747
John Crispin [Fri, 19 Feb 2016 16:37:56 +0000 (16:37 +0000)]
ralink: unbreak port4 on mt7620
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 48746
Steven Barth [Fri, 19 Feb 2016 11:49:03 +0000 (11:49 +0000)]
kernel: fix chainiv crypto modules in 4.3+ kernels
Signed-off-by: Steven Barth <cyrus@openwrt.org>
SVN-Revision: 48745
Felix Fietkau [Thu, 18 Feb 2016 18:55:46 +0000 (18:55 +0000)]
mac80211: set default aggregation timeout to 0 to improve stability
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48744
Felix Fietkau [Thu, 18 Feb 2016 18:55:35 +0000 (18:55 +0000)]
mac80211: update A-MSDU tx support to the latest version
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48743
Jo-Philipp Wich [Thu, 18 Feb 2016 12:09:34 +0000 (12:09 +0000)]
ar71xx: add missing symbol to Linux 4.4 config (#21878)
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 48742
John Crispin [Thu, 18 Feb 2016 08:35:21 +0000 (08:35 +0000)]
archs38: remove network config override
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 48741
John Crispin [Thu, 18 Feb 2016 08:22:32 +0000 (08:22 +0000)]
linux: add support of Synopsys ARCHS38-based boards
This patch introduces support of new boards with ARC HS38 cores.
ARC HS38 is a new generation of ARC cores which utilize ARCv2 ISA.
As with ARC770 we're addind support for 2 boards for now:
[1] Synopsys SDP board (AXS103)
This is the same base-board as in AXS101 but with
FPGA-based CPU-tile where ARCHs38 core is implemented.
[2] nSIM
Again this is the same simulation engine but configured for
new instruction set and features of new CPU.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Felix Fietkau <nbd@openwrt.org>
Cc: Jo-Philipp Wich <jow@openwrt.org>
Cc: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 48740
John Crispin [Thu, 18 Feb 2016 08:22:17 +0000 (08:22 +0000)]
toolchain: add support of ARCv2 architecture
This change adds support of ARC ISAv2 processors in
OpenWRT toolchain.
In general gcc for ARC may compile code for both ISA versions
simultaneously but libgcc will be built only for default
architecture that's why it's necessary to specify --with-cpu
on gcc configuration.
As for uClibc we need to use different configurations for
different ARC ISAs.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Felix Fietkau <nbd@openwrt.org>
Cc: Jo-Philipp Wich <jow@openwrt.org>
Cc: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 48739
John Crispin [Thu, 18 Feb 2016 08:22:07 +0000 (08:22 +0000)]
lldp: Upgrade to 0.9.0
Signed-off-by: Ben Kelly <ben@benjii.net>
SVN-Revision: 48738
Luka Perkov [Wed, 17 Feb 2016 17:49:26 +0000 (17:49 +0000)]
mvebu: add SolidRun ClearFog A1 support
Signed-off-by: Andrej Vlasic <andrej.vlasic@sartura.hr>
SVN-Revision: 48736
Jo-Philipp Wich [Wed, 17 Feb 2016 08:44:49 +0000 (08:44 +0000)]
toolchain: use latest glibc 2.21 and 2.22 revisions
Refresh patches and rework Makefile to fetch glibc from release branches
instead of relying on tarballs.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 48735
Jo-Philipp Wich [Wed, 17 Feb 2016 08:44:45 +0000 (08:44 +0000)]
toolchain: mark eglibc 2.19 broken
Upstream is dead and the last available version has multiple open CVEs.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 48734
Jo-Philipp Wich [Wed, 17 Feb 2016 08:44:37 +0000 (08:44 +0000)]
download.mk: fix packed checkout mirroring support
Changeset r48416 broke the downloading of mirrored, packed scm checkouts.
Fix this by removing the "@" sign in front of the download command which is
now executed as part of a larger shell command under flock.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 48733
Felix Fietkau [Tue, 16 Feb 2016 21:42:00 +0000 (21:42 +0000)]
brcm2708-gpu-fw: move pkg build dir to kernel build dir to fix rebuild bugs after cleaning the kernel tree
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48732
Felix Fietkau [Tue, 16 Feb 2016 21:30:20 +0000 (21:30 +0000)]
gdb: fix powerpc build issues with musl
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48731
John Crispin [Tue, 16 Feb 2016 16:25:49 +0000 (16:25 +0000)]
kernel: add missing symbols to config-4.4
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 48730
John Crispin [Tue, 16 Feb 2016 16:25:40 +0000 (16:25 +0000)]
kernel: add mode backlight symbols
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 48729
John Crispin [Tue, 16 Feb 2016 16:25:33 +0000 (16:25 +0000)]
kernel: add missing symbol to usb-audio
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 48728
John Crispin [Tue, 16 Feb 2016 16:25:25 +0000 (16:25 +0000)]
kernel: DSA is missing a OF dependend dep for mdio
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 48727
John Crispin [Tue, 16 Feb 2016 16:25:16 +0000 (16:25 +0000)]
at91: udc driver was missing deps
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 48726
John Crispin [Tue, 16 Feb 2016 16:25:10 +0000 (16:25 +0000)]
mvebu: add missing symbols.
this broke full builds of the mvebu target
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 48725
John Crispin [Tue, 16 Feb 2016 07:47:06 +0000 (07:47 +0000)]
kernel: crypto-echainiv was missing deps
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 48724
John Crispin [Mon, 15 Feb 2016 18:45:34 +0000 (18:45 +0000)]
kernel: add missing libphy dep to DSA
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 48723
John Crispin [Mon, 15 Feb 2016 18:45:27 +0000 (18:45 +0000)]
kernel: MPLS did not exist prior to v4.4
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 48722
John Crispin [Mon, 15 Feb 2016 18:45:22 +0000 (18:45 +0000)]
ramips: Add support for Phicomm PSG1208
This patch adds support for Phicomm PSG1208.This is a router with MT7620A SoC with 8M flash and 64M ram.
The WPS led is uesd as status_led because the power light can't be controlled with GPIO.
It seems that the 5g wifi led is connected to MT7612E and it can't be controlled with GPIO too.
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
SVN-Revision: 48721
Felix Fietkau [Mon, 15 Feb 2016 10:53:23 +0000 (10:53 +0000)]
perf: add dependency on !LINUX_3_18 to fix builds
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48720
Felix Fietkau [Sun, 14 Feb 2016 12:26:49 +0000 (12:26 +0000)]
mac80211: fix a crash in monitor mode injection
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48719
Felix Fietkau [Sat, 13 Feb 2016 22:23:32 +0000 (22:23 +0000)]
build: disable the use of -iremap for UML (#21851)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48718
Jo-Philipp Wich [Fri, 12 Feb 2016 19:55:07 +0000 (19:55 +0000)]
ar71xx: add missing kernel symbol (#21849)
Also reorder subtarget kernel configs.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 48717
Jo-Philipp Wich [Fri, 12 Feb 2016 19:46:31 +0000 (19:46 +0000)]
busybox: fix broken default for FEATURE_IP_ROUTE_DIR (#21845)
Changeset r47775 introduced a wrong default value "n" for the ip applets
config search path, breaking the handling of named routing tables and other
objects having alias configurations.
Fix the issue by providing a proper default value aligned with the value
used by full iproute2.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 48716
John Crispin [Fri, 12 Feb 2016 09:29:23 +0000 (09:29 +0000)]
ramips: Support LEDs on D-Link DIR-860L B1
Adds the required gpio definitions.
Signed-off-by: Johannes Wienke <languitar@semipol.de>
SVN-Revision: 48715
John Crispin [Fri, 12 Feb 2016 08:31:54 +0000 (08:31 +0000)]
linux/crypto: Add echainiv module provided by 4.4 kernels
This module is needed for IPsec ESP support, i.e..
Signed-off-by: André Valentin <avalentin@marcant.net>
SVN-Revision: 48714
John Crispin [Fri, 12 Feb 2016 08:31:49 +0000 (08:31 +0000)]
kernel: add dsa driver support
The Linux Distributed Switch Architecture drivers provide richer support than
the swconfig driver API in that each switch port gets its own interface which
allows protocols such as STP, LLDP, 802.1x etc.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>
SVN-Revision: 48713
John Crispin [Fri, 12 Feb 2016 08:31:39 +0000 (08:31 +0000)]
package/libs/gmp: update libgmp to 6.1.0
Update also the library version of gmp to 6.1.0.
Switch download to use the GNU alias.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
SVN-Revision: 48712
John Crispin [Fri, 12 Feb 2016 08:31:32 +0000 (08:31 +0000)]
ar71xx: Support for Ubiquiti UniFi AP AC LITE
Add support for the Ubiquiti UniFi AP AC LITE
Signed-off-by: P.Wassi <p.wassi at gmx.at>
SVN-Revision: 48711
John Crispin [Fri, 12 Feb 2016 08:31:17 +0000 (08:31 +0000)]
linux/netsupport: Add support for MPLS protocol
This adds support for MPLS protocol including usage of lightweight tunnels.
Kernel size of vmlinuz.bin grows by ~8k.
Signed-off-by: André Valentin <avalentin@marcant.net>
SVN-Revision: 48710
John Crispin [Fri, 12 Feb 2016 08:31:11 +0000 (08:31 +0000)]
package/devel/gdb: update to 7.10.1
Minor bugfix update, released in Dec 2015
https://www.gnu.org/software/gdb/news/
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
SVN-Revision: 48709
John Crispin [Fri, 12 Feb 2016 08:31:06 +0000 (08:31 +0000)]
toolchain/gdb: update to 7.10.1
Minor bugfix update, released in Dec 2015
https://www.gnu.org/software/gdb/news/
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
SVN-Revision: 48708
John Crispin [Fri, 12 Feb 2016 08:30:56 +0000 (08:30 +0000)]
util-linux: Subpackage for blkdiscard
Adding subpackage to make it possible to enable blkdiscard utility.
Signed-off-by: Michal Hrusecky <Michal.Hrusecky@nic.cz>
SVN-Revision: 48707
John Crispin [Fri, 12 Feb 2016 08:30:38 +0000 (08:30 +0000)]
ar71xx: Make code formatting consistent on ath79/machtypes.h
Signed-off-by: Tiziano Bacocco <tizbac2@gmail.com>
SVN-Revision: 48706
John Crispin [Fri, 12 Feb 2016 08:30:28 +0000 (08:30 +0000)]
ar71xx: Added support for TL-WA801NDv3
Signed-off-by: Tiziano Bacocco <tizbac2@gmail.com>
SVN-Revision: 48705
John Crispin [Fri, 12 Feb 2016 08:30:18 +0000 (08:30 +0000)]
vti: fix kmod dependencies
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 48704
John Crispin [Fri, 12 Feb 2016 08:30:09 +0000 (08:30 +0000)]
kernel/modules: add kmod-ip6-vti
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 48703
John Crispin [Fri, 12 Feb 2016 08:30:00 +0000 (08:30 +0000)]
kernel/modules: rename kmod-ipvti to kmod-ip-vti
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 48702
John Crispin [Fri, 12 Feb 2016 08:29:54 +0000 (08:29 +0000)]
ar71xx: WNR2000v3: exclude USB modules from image
Netgear WNR2000v3 has no USB port yet default system image
includes USB kernel modules. This patch fixes that.
Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
SVN-Revision: 48701
John Crispin [Fri, 12 Feb 2016 08:29:44 +0000 (08:29 +0000)]
use "-gt" instead of ">" with [ in /lib/functions/lantiq_dsl.sh
Avoids inadvertent file creation when executing
`/etc/init.d/dsl_control status`.
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
SVN-Revision: 48700
John Crispin [Fri, 12 Feb 2016 08:29:38 +0000 (08:29 +0000)]
video: kmod-pwm does not exist anymore
it was removed in r43947
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 48699
John Crispin [Fri, 12 Feb 2016 08:29:33 +0000 (08:29 +0000)]
ramips: Add support for Netgear EX2700
This patch adds support for the Netgear EX2700 and builds an approriate
sysupgrade image.
What's missing is the option to build a factory image flashable via the
router's stock web interface, but this approach is hindered by the fact
that u-boot operforms an additional integrity check, which expects a
uImage header in the last 64 bytes of the "kernel" partition, which
the bootloader expects to be 960k, a size exceeded by the standard
OpenWrt kernel.
Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>
SVN-Revision: 48698
John Crispin [Fri, 12 Feb 2016 08:29:24 +0000 (08:29 +0000)]
zynq: add new target
Add support for Xilinx ZC702 Dev board
Zynq target is using 4.4 kernel and mainline 2016.1 u-boot.
Patch is tested with Xilinx ZC702 Dev board with SD boot mode.
known issues:
- no QSPI driver in 4.4 kernel: no QSPI flash support
- USB is not working in 4.4 kernel
Signed-off-by: Jason Wu <jason.wu.misc@gmail.com>
create mode 100644 package/boot/uboot-zynq/Makefile
create mode 100644 target/linux/zynq/Makefile
create mode 100644 target/linux/zynq/base-files.mk
create mode 100755 target/linux/zynq/base-files/etc/board.d/02_network
create mode 100644 target/linux/zynq/base-files/etc/config/network
create mode 100644 target/linux/zynq/base-files/etc/inittab
create mode 100644 target/linux/zynq/config-4.4
create mode 100644 target/linux/zynq/image/Makefile
create mode 100755 target/linux/zynq/image/mkits.sh
create mode 100644 target/linux/zynq/patches-4.4/0001-arm-dts-zynq-zc702.dts-Set-default-rdinit-to-sbin-in.patch
create mode 100644 target/linux/zynq/profiles/zc702.mk
SVN-Revision: 48697
John Crispin [Fri, 12 Feb 2016 08:29:11 +0000 (08:29 +0000)]
kernel: gpio-button-hotplug: update to use threaded irq's
Many gpio controllers 'cansleep' due to the fact that they are behind busses
e.g. i2c etc.
Using threaded irq's allows for 'sleep-able' gpio's to be used.
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 48696
Felix Fietkau [Thu, 11 Feb 2016 22:48:36 +0000 (22:48 +0000)]
ag71xx: fix build error with debugfs code
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48695
Felix Fietkau [Thu, 11 Feb 2016 15:02:07 +0000 (15:02 +0000)]
ag71xx: increase rx ring size to improve performance
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48694
Felix Fietkau [Thu, 11 Feb 2016 15:02:00 +0000 (15:02 +0000)]
ag71xx: store ring size order instead of ring size to avoid div/mod
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48693
Felix Fietkau [Thu, 11 Feb 2016 15:01:54 +0000 (15:01 +0000)]
ag71xx: increase tx ring size to improve performance
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48692
Felix Fietkau [Thu, 11 Feb 2016 15:01:48 +0000 (15:01 +0000)]
ag71xx: optimize icache footprint of the receive poll function
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48691
Felix Fietkau [Thu, 11 Feb 2016 15:00:19 +0000 (15:00 +0000)]
kernel: fix uninitialized variable in bridge multicast-to-unicast patch on 4.3
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48690
Florian Fainelli [Thu, 11 Feb 2016 03:05:29 +0000 (03:05 +0000)]
kernel: Revert "kernel: set root on NFS when enabled"
This reverts r48591, users needing NFS root will know how to configure
their platform and kernel command-line appropriately.
Reported-by: Petr Štetiar <ynezz@true.cz>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 48689
Rafał Miłecki [Wed, 10 Feb 2016 11:35:50 +0000 (11:35 +0000)]
mtd: fix Seama format after replacing EOF with sysupgrade data
Seama header has MD5 similarly to TRX and its CRC32. We need to update
it after replacing anything in Seama entity content to make bootloader
accept it.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48688
Jo-Philipp Wich [Tue, 9 Feb 2016 22:42:48 +0000 (22:42 +0000)]
libubox: properly handle "null" values in blobmsg_add_json_element()
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 48687
Jo-Philipp Wich [Tue, 9 Feb 2016 13:03:24 +0000 (13:03 +0000)]
ubox: fix kmodloader resource leaks (#21826)
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 48686
Jo-Philipp Wich [Tue, 9 Feb 2016 12:34:05 +0000 (12:34 +0000)]
base-files: add netifd's default prelocal table to /etc/iproute2/rt_tables
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 48685
Jo-Philipp Wich [Tue, 9 Feb 2016 12:33:53 +0000 (12:33 +0000)]
mvebu: fix WRT1900AC v1 LED driver module
Update OpenWRT build tree to reflect changes in TLC-591xx LED family driver.
In kernels < 4.0 the driver was present in form of a patch for the TLC-59116 chip,
and was upstreamed later in kernels > 4.0 to support the entire chip family.
Signed-off-by: Sebastian Careba <nitroshift@yahoo.com>
[jow: fix Kconfig symbol name]
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 48684
Jo-Philipp Wich [Tue, 9 Feb 2016 12:33:25 +0000 (12:33 +0000)]
ubox: fix open() error handling (#21826)
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 48683
Jo-Philipp Wich [Tue, 9 Feb 2016 12:33:17 +0000 (12:33 +0000)]
x86: preserve partition table on sysupgrade
With this patch sysupgrade will write directly to the partitions
instead of to the main disk. The UUID is copied from the image
to the MBR as well. This prevents the mbr from being completely
overwritten and losing the partition table. The -p option has
been added to maintain the original behavior and overwite the
entire disk with the new image. Tests have been added to ensure
that the image partitions match up with the active partitions.
Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net>
SVN-Revision: 48682
Felix Fietkau [Mon, 8 Feb 2016 19:18:21 +0000 (19:18 +0000)]
ramips: fix build error on oversized images by putting the dir-860l-b1 size check at the end of the chain
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48681
Felix Fietkau [Mon, 8 Feb 2016 18:44:21 +0000 (18:44 +0000)]
kernel: enable CONFIG_KALLSYMS_UNCOMPRESSED=y
It was enabled ages ago when it was added.
It still saves about 10k after LZMA, so let's enable it again.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48680
Jo-Philipp Wich [Mon, 8 Feb 2016 14:28:57 +0000 (14:28 +0000)]
dropbear: honor CONFIG_TARGET_INIT_PATH
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 48679
Jo-Philipp Wich [Mon, 8 Feb 2016 14:28:50 +0000 (14:28 +0000)]
base-files: honor CONFIG_TARGET_INIT_PATH
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 48678
Jo-Philipp Wich [Mon, 8 Feb 2016 14:28:42 +0000 (14:28 +0000)]
procd: honor CONFIG_TARGET_INIT_PATH
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 48677
Jo-Philipp Wich [Mon, 8 Feb 2016 14:28:35 +0000 (14:28 +0000)]
rules.mk: add TARGET_INIT_PATH toplevel variables
Add a new variable TARGET_INIT_PATH which holds the default $PATH variable
value configured in menuconfig.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 48676
Jo-Philipp Wich [Mon, 8 Feb 2016 14:28:29 +0000 (14:28 +0000)]
generic: add missing kconfig symbol
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 48675
Felix Fietkau [Mon, 8 Feb 2016 13:38:22 +0000 (13:38 +0000)]
mt76: update to the latest version, fixes fragmented rx issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48674
Felix Fietkau [Mon, 8 Feb 2016 13:38:11 +0000 (13:38 +0000)]
mac80211: improve a-msdu rx performance by avoiding unnecessary data copying
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48673
Felix Fietkau [Mon, 8 Feb 2016 13:38:03 +0000 (13:38 +0000)]
mac80211: fix a memory leak in a-msdu rx
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48672
Felix Fietkau [Mon, 8 Feb 2016 13:37:55 +0000 (13:37 +0000)]
mac80211: update A-MSDU tx patch to the latest version
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48671
Felix Fietkau [Mon, 8 Feb 2016 13:37:47 +0000 (13:37 +0000)]
mac80211: refresh patch
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48670
Jo-Philipp Wich [Mon, 8 Feb 2016 10:58:34 +0000 (10:58 +0000)]
linux: fix kmod-backlight-pwm
Also remove erroneous =m overrides from kconfig symbol list.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 48669
Jo-Philipp Wich [Mon, 8 Feb 2016 10:58:27 +0000 (10:58 +0000)]
x86: remove unrelated config override
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 48668
John Crispin [Mon, 8 Feb 2016 09:22:56 +0000 (09:22 +0000)]
brcm2708: add missing symbols
enable CONFIG_PWM
enable the RASPI PWM stuff
fix buildbot w. 4.1
compile tested only
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 48667
John Crispin [Mon, 8 Feb 2016 08:26:27 +0000 (08:26 +0000)]
ramips: HLK-RM04 - Enable GPIO14 for WPS button
The top half of UARTF on the HLK-RM04 is used for GPIO.
mode 1 mode 2
RIN GPIO14
DSR_N GPIO13
DCD_N GPIO12
DTR_N GPIO11
RXD GPIO10
CTS_N GPIO09
TXD GPIO08
RTS_N GPIO07
This patch applies 3'b101 mode to UARTF:
GPIO14
GPIO13
GPIO12
GPIO11
RXD
CTS_N
TXD
RTS_N
Because the base rt5350.dtsi file forces 3'b000 mode, remove the pin setting from this file and apply it directly to the files that inherit from it (WIZFI630A.dts and WT1520.dtsi). This change makes the rt5350.dtsi file consistent with the mt7620a.dtsi file.
Signed-off-by: John Clark <inindev@gmail.com>
SVN-Revision: 48665
John Crispin [Mon, 8 Feb 2016 08:26:19 +0000 (08:26 +0000)]
rampis: HLK-RM04 - Setup I2C as GPIO
The I2C function of the RT5350 SoC on the HLK-RM04 is used for GPIO1 and GPIO2.
Take note that the I2C_SD pin is GPIO1 on the RT5350 and is exposed on the HLK-RM04 as GPIO0
Likewise the I2C_SCLK pin is GPIO2 on the RT5350 and is exposed on the HLK-RM04 as GPIO1
group mode 1 mode 2 hlk-rm04 pin & export
i2c i2c_sd gpio1 (pin 8, hlk-rm04:gpio0)
i2c i2c_sclk gpio2 (pin 9, hlk-rm04:gpio1)
reference:
http://www.hlktech.net/product_detail.php?ProId=39
http://cdn.sparkfun.com/datasheets/Wireless/WiFi/RT5350.pdf
Signed-off-by: John Clark <inindev@gmail.com>
SVN-Revision: 48664
John Crispin [Mon, 8 Feb 2016 08:26:11 +0000 (08:26 +0000)]
ramips: HLK-RM04 - Fix push button functions
The RESET button of the HLK-RM04 is connected to GPIO0, linux function 0x198
The WPS button of the HLK-RM04 is connected to GPIO14, linux function 0x211
Signed-off-by: John Clark <inindev@gmail.com>
SVN-Revision: 48663
John Crispin [Mon, 8 Feb 2016 08:26:02 +0000 (08:26 +0000)]
ramips: HLK-RM04 - Remove power LED config
The power LED on the HLK-RM04 is hard wired to the power bus and is not under GPIO control, remove the bogus config for it.
(Note that GPIO0 is actually connected to the RESET button.)
Signed-off-by: John Clark <inindev@gmail.com>
SVN-Revision: 48662
John Crispin [Mon, 8 Feb 2016 08:25:53 +0000 (08:25 +0000)]
base-files: For sysfixtime use hwclock if RTC available
On systems that have an RTC prefer it to the file-based time fixup (i.e.
use hwclock when there is a permanent clock instead of the faked up time
logic that is needed when there is not RTC).
We can't rely on hctosys kernel feature either as we're usually using
RTC as kernel modules which are usually being loaded after hctosys was
run, leading in the following error:
hctosys: unable to open rtc device (rtc0)
Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
SVN-Revision: 48661
John Crispin [Mon, 8 Feb 2016 08:25:46 +0000 (08:25 +0000)]
tools/gmp: update to 6.1.0
Update gmp to version 6.1.0, released in November 2015.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
SVN-Revision: 48660
John Crispin [Mon, 8 Feb 2016 08:25:39 +0000 (08:25 +0000)]
tools/cmake: update to 3.4.3
Update cmake to 3.4.3.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
SVN-Revision: 48659
John Crispin [Mon, 8 Feb 2016 08:25:31 +0000 (08:25 +0000)]
lantiq: VGV7510KW22/VGV7519 update spi pinmux group
With the backport of the kernel 4.5 pinctrl-xway patches (
3551609d &
826bca29) the pinmux group "spi" was splitted into "spi_di", "spi_do" &
"spi_clk". But the no longer existing group "spi" is still used by some
device tree source files.
This fixes the detection of the wireless chipset of the VGV7510KW22.
Signed-off-by: Mathias Kresin <openwrt@kresin.me>
SVN-Revision: 48658
projects / openwrt / staging / neocturne.git / log