drm/amd/display: Fix Scaling (RMX_*) for DC driver

Before:
We use drm_match_cea_mode() to get the vic for any mode we
want to set, most of the time vic will be different for the new mode.

DC uses memcmp to check if timing changed, in this case DC will
say timing changed and we endup doing a full modeset.

Current:
Now we check if !RMX_OFF and old_refresh == new_refresh if so
we copy the vic from old timing. In a case where we are currently on
a lower timing and want to change to higher mode, stream->dst will be
different and cause us to do a full modeset, which is what we want.

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Set RMX_ASPECT as default

Setting this allows for display scaling by default

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix dereference of pointer fs_params before it is null checked

Currently there are several instances of pointer fs_params being
dereferenced before fs_params is being null checked.  Fix this by
only dereferencing fs_params after the null check.

Detected by CoverityScan, CID#1475565 ("Dereference before null check")

Fixes: e1e8a020c6b8 ("drm/amd/display: Add support for Freesync 2 HDR and Content to Display Mapping")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display/amdgpu_dm/amdgpu_dm.c: Remove duplicate header

Remove dm_services_types.h which is included more than once

Signed-off-by: Brajeswar Ghosh <brajeswar.linux@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: Remove duplicate header

Remove gca/gfx_8_0_sh_mask.h which is included more than once

Signed-off-by: Brajeswar Ghosh <brajeswar.linux@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu/vce_v3_0.c: Remove duplicate header

Remove gca/gfx_8_0_d.h which is included more than once

Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Brajeswar Ghosh <brajeswar.linux@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable paging queue based on FW version (v2)

Based SDMA fw version to enable has_page_queue support. Have to move
sdma_v4_0_init_microcode from sw_init to early_init, to load firmware
and init fw_version before set_ring/buffer/vm_pte_funcs use it.

v2: don't enable on vega12, 20 until confirmed

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable paging queue doorbell support v4

Because increase SDMA_DOORBELL_RANGE to add new SDMA doorbell for paging queue will
break SRIOV, instead we can reserve and map two doorbell pages for amdgpu, paging
queues doorbell index use same index as SDMA gfx queues index but on second page.

For Vega20, after we change doorbell layout to increase SDMA doorbell for 8 SDMA RLC
queues later, we could use new doorbell index for paging queue.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix typo in function sdma_v4_0_page_resume

This looks like copy paste typo

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Remove dead static variable

The static struct drm_driver *driver was
not used because drm_pci_init was deprecated

v2: Remove static pointer pdriver(Christian)

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: change system memory overcommit limit

It is to improve system limit by:
1. replacing userptrlimit with a total memory limit that
conunts TTM memory usage and userptr usage.
2. counting acc size for all BOs.

Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix KFD doorbell SG BO mapping

This change prepares for adding SG BOs that will be used for mapping
doorbells into GPUVM address space.

This type of BO would be mistaken for an invalid userptr BO. Improve
that check to test that it's actually a userptr BO so that SG BOs that
are still in the CPU domain can be validated and mapped correctly.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Fix and simplify sync object handling for KFD

The adev parameter in amdgpu_sync_fence and amdgpu_sync_resv is only
needed for updating sync->last_vm_update. This breaks if different
adevs are passed to calls for the same sync object.

Always pass NULL for calls from KFD because sync objects used for
KFD don't belong to any particular device, and KFD doesn't need the
sync->last_vm_update fence.

This fixes kernel log warnings on multi-GPU systems after recent
changes in amdgpu_amdkfd_gpuvm_restore_process_bos.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: KFD Restore process: Optimize waiting

Instead of waiting for each KFD BO after validation just wait for the
last BO moving fence.

Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Remove explicit wait after VM validate

PD or PT might have to be moved during validation and this move has to be
completed before updating it. If page table updates are done using SDMA
then this serializing is done by SDMA command submission.

And if PD/PT updates are done by CPU, then explicit waiting for PD/PT
updates are done in amdgpu VM amdgpu_vm_wait_pd function.

Sync to PD BO moving fence to handle corner case where none of the PTs
are updated but PD is evicted.

Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c: Remove duplicate header

Remove gca/gfx_8_0_enum.h which is included more than once

Signed-off-by: Brajeswar Ghosh <brajeswar.linux@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/psp: use define rather than magic number for mode1 reset

Use the define rather than hardcoded value.

Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/scheduler: Fix bad job be re-processed in TDR

A bad job is the one triggered TDR(In the current amdgpu's
implementation, actually all the jobs in the current joq-queue will
be treated as bad jobs). In the recovery process, its fence
will be fake signaled and as a result, the work behind will be scheduled
to delete it from the mirror list, but if the TDR process is invoked
before the work's execution, then this bad job might be processed again
and the call dma_fence_set_error to its fence in TDR process will lead to
kernel warning trace:

[  143.033605] WARNING: CPU: 2 PID: 53 at ./include/linux/dma-fence.h:437 amddrm_sched_job_recovery+0x1af/0x1c0 [amd_sched]
kernel: [  143.033606] Modules linked in: amdgpu(OE) amdchash(OE) amdttm(OE) amd_sched(OE) amdkcl(OE) amd_iommu_v2 drm_kms_helper drm i2c_algo_bit fb_sys_fops syscopyarea sysfillrect sysimgblt kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel aes_x86_64 snd_hda_codec_generic crypto_simd glue_helper cryptd snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq joydev snd_seq_device snd_timer snd soundcore binfmt_misc input_leds mac_hid serio_raw nfsd auth_rpcgss nfs_acl lockd grace sunrpc sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 8139too floppy psmouse 8139cp mii i2c_piix4 pata_acpi
[  143.033649] CPU: 2 PID: 53 Comm: kworker/2:1 Tainted: G           OE    4.15.0-20-generic #21-Ubuntu
[  143.033650] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[  143.033653] Workqueue: events drm_sched_job_timedout [amd_sched]
[  143.033656] RIP: 0010:amddrm_sched_job_recovery+0x1af/0x1c0 [amd_sched]
[  143.033657] RSP: 0018:ffffa9f880fe7d48 EFLAGS: 00010202
[  143.033659] RAX: 0000000000000007 RBX: ffff9b98f2b24c00 RCX: ffff9b98efef4f08
[  143.033660] RDX: ffff9b98f2b27400 RSI: ffff9b98f2b24c50 RDI: ffff9b98efef4f18
[  143.033660] RBP: ffffa9f880fe7d98 R08: 0000000000000001 R09: 00000000000002b6
[  143.033661] R10: 0000000000000000 R11: 0000000000000000 R12: ffff9b98efef3430
[  143.033662] R13: ffff9b98efef4d80 R14: ffff9b98efef4e98 R15: ffff9b98eaf91c00
[  143.033663] FS:  0000000000000000(0000) GS:ffff9b98ffd00000(0000) knlGS:0000000000000000
[  143.033664] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  143.033665] CR2: 00007fc49c96d470 CR3: 000000001400a005 CR4: 00000000003606e0
[  143.033669] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  143.033669] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  143.033670] Call Trace:
[  143.033744]  amdgpu_device_gpu_recover+0x144/0x820 [amdgpu]
[  143.033788]  amdgpu_job_timedout+0x9b/0xa0 [amdgpu]
[  143.033791]  drm_sched_job_timedout+0xcc/0x150 [amd_sched]
[  143.033795]  process_one_work+0x1de/0x410
[  143.033797]  worker_thread+0x32/0x410
[  143.033799]  kthread+0x121/0x140
[  143.033801]  ? process_one_work+0x410/0x410
[  143.033803]  ? kthread_create_worker_on_cpu+0x70/0x70
[  143.033806]  ret_from_fork+0x35/0x40

So just delete the bad job from mirror list directly

Changes in v3:
- Add a helper function to delete the bad jobs from mirror list and call
it directly *before* the job's fence is signaled

Changes in v2:
- delete the useless list node check
- also delete bad jobs in drm_sched_main because:
kthread_unpark(ring->sched.thread) will be invoked very early before
amdgpu_device_gpu_recover's return, then drm_sched_main will have
chance to pick up a new job from the job queue. This new job will be
added into the mirror list and processed by amdgpu_job_run, but may
not be deleted from the mirror list on time due to the same reason.
And finally re-processed by drm_sched_job_recovery

Signed-off-by: Trigger Huang <Trigger.Huang@amd.com>
Reviewed-by: Christian König <chrstian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx: use proper offset define for MEC doorbells

Looks like a copy paste typo.

Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Workaround PASID missing in gfx9 interrupt payload under non HWS

This is a known gfx9 HW issue, and this change can perfectly workaround
the issue.

Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Adjust the debug message in KFD ISR

This makes debug message get printed even when there is early return.

Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Added Vega12 and Polaris12 for KFD.

Add Vega12 and Polaris12 device info and device IDs to KFD.

Signed-off-by: Gang Ba <gaba@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Replace mqd with mqd_mgr as the variable name for mqd_manager

This will make reading code much easier. This fixes a few spots missed in a
previous commit with the same title.

Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amdgpu: use GMC v9 KIQ workaround only for the GFXHUB" (v2)

With GFXOFF enabled, this patch will cause PCO amdgpu_test failed,
but GFXOFF is necessary for PCO, so revert the patch.

This reverts commit b83761bb0b09ec11c924afe9d88e458cb16a0372.

v2: add a comment for future reference (Alex)

Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jack Gui <Jack.Gui@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: Ratelimit all "was not implemented" messages

Running kfdtest on an AMD Carizzo flooded the kernel log
with thousands of these "was not implemented" messages,
making it impossible to see other messages there.

Ratelimit the messages to prevent user-space from flooding
the kernel log.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Clean up DCN1 clock requests

[Why]
There was a full clock request struct of which only
one value was being used.

[How]
Replace the struct with a uint32_t

Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Support amdgpu "max bpc" connector property (v2)

[Why]
Many panels support more than 8bpc but some modes are unavailable while
running at greater than 8bpc due to DP/HDMI bandwidth constraints.

Support for more than 8bpc was added recently in the driver but it
defaults to the maximum supported bpc - locking out these modes.

This should be a user configurable option such that the user can select
what bpc configuration they would like.

[How]
This patch adds support for getting and setting the amdgpu driver
specific "max bpc" property on the connector.

It also adds support for limiting the output bpc based on the property
value. The default limitation is the lowest value in the range, 8bpc.
This was the old value before the range was uncapped.

This patch should be updated/replaced later once common drm support
for max bpc lands.

Bugzilla: https://bugs.freedesktop.org/108542
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201585
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200645
Fixes: e03fd3f300f6 ("drm/amd/display: Do not limit color depth to 8bpc")
v2: rebase on upstream (Alex)

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add amdgpu "max bpc" connector property (v2)

[Why]
Many panels support more than 8bpc but some modes are unavailable while
running at greater than 8bpc due to DP/HDMI bandwidth constraints.

Support for more than 8bpc was added recently in the driver but it
defaults to the maximum supported bpc - locking out these modes.

This should be a user configurable option such that the user can select
what bpc configuration they would like.

[How]
This patch introduces the "max bpc" amdgpu driver specific connector
property so the user can limit the maximum bpc. It ranges from 8 to 16.

This doesn't directly set the preferred bpc for the panel since it
follows Intel's existing driver conventions.

This proprety should be removed once common drm support for max bpc
lands.

v2: rebase on upstream (Alex)

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove set but not used variable 'ring'

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/gpu/drm/amd/amdgpu/psp_v10_0.c: In function 'psp_v10_0_ring_stop':
drivers/gpu/drm/amd/amdgpu/psp_v10_0.c:230:19: warning:
 variable 'ring' set but not used [-Wunused-but-set-variable]

drivers/gpu/drm/amd/amdgpu/psp_v3_1.c: In function 'psp_v3_1_ring_stop':
drivers/gpu/drm/amd/amdgpu/psp_v3_1.c:359:19: warning:
 variable ‘ring’ set but not used [-Wunused-but-set-variable]

It not used since commit
4ef72453311a ("drm/amdgpu: added api for stopping psp ring (v2)")

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu/sriov: Aligned the definition with libgv

Aligned the amd_sriov_msg_pf2vf_info_header and amd_sriov_msg_pf2vf_info_header's
definition with libgv.

Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Frank.Min <Frank.Min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Get backlight controller id from link

[Why]
dc_link_set_backlight_level can be called from a context
where the stream is unknown.  In this case, we can still
find which controller is driving this particular backlight

[How]
Compare links for equality instead of streams

Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: expose surface confirm color function

expose dcn10_get_surface_visual_confirm_color() to be used in the
future

Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix pipe interdependent hubp programming

A number of registers need to be updated for all active
pipes wherever any pipe causes a change in watermarks.

This change separates programming of these registers into
a separate function call that is called for all active pipes
during a bw update.

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Adjust stream enable sequence

[Why]
We observed an issue where a display would not accept programming of
the ignore_MSA_timing_param bit if the stream was blanked.

[How]
move enable_stream_features from enable_link_dp to
core_link_enable_stream, after unblank_stream

Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: get tail pipe before aquire free pipe

[Why]
For some complicated blending transition cases, the head
pipe of the second stream may end up being a higher pipe
index than the free pipe.  In those cases dc_add_plane_to_context
will incorrectly set the tail_pipe to the free pipe, which
will cause the top_pipe and bottom_pipe to be the same

[How]
Move the call to resource_get_tail_pipe_for_stream() to be
before call to acquire_free_pipe_for_stream().

Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: retry 3 times before successfully reading

DPCD Extended Receiver Capability Field

[Why]
1.dpcd extended receiver capability sometimes read fail,
  and corrupted data leads to sink caps is not correct.
2.sometimes sink reply ack with fewer data

[How]
  check the return value of core_link_read_dpcd,
  try to read again when failure happens

Signed-off-by: Xiaodong Yan <Xiaodong.Yan@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.06

Signed-off-by: Steven Chiu <steven.chiu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: redesign scaling rotation math

Change the math to work in viewport rotation when calculating
viewport and viewport adjustment. This simplifies the math
for viewport calculation and makes viewport adjustment easier to
understand.

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: clear underflow on optc unblank

[why]
Underflow is asserted due to some timing condition which does not
actually result in visible underflow (i.e. it occurs while blanked).

[how]
Force clear underflow occured bit whenver we unblank.

Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Consolidate two-pixels-per-container check

[why]
The condition to check for two pixels per containter has become rather
long and is used in number of places.

[how]
Move the check to a helper function.

Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: calculate stream->phy_pix_clk before clock mapping

[why]
phy_pix_clk is one of the variable used to check if one PLL can be shared
with displays having common mode set configuration. As of now
phy_pix_clock varialbe is calculated in function dc_validate_stream().
dc_validate_stream() function is called after clocks are assigned for the
new display. Due to this during hotplug, when PLL sharing conditions are
checked for new display phy_pix_clk variable will be 0 and for displays
that are already enabled phy_pix_clk will have some value. Hence PLL will
not be shared and if the display hardware doesn't have any more PLL to
assign, mode set will fail due to resource unavailability.

[how]
Instead of only calculating the phy_pix_clk variable after the PLL is
assigned for new display, this patch calculates phy_pix_clk also during
the before assigning the PLL for new display.

Signed-off-by: Yogesh Mohan Marimuthu <yogesh.mohanmarimuthu@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Typo for return check value.

[Why]
Typo for return check value.

[How]
Correct one should be "return enable ? true : false;"

Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Clean up dp_blank functions

[Why]
Unused variable "refresh" and incorrect comment formatting

[How]
Remove variable, reindent comments

Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Check for dmcu initialization before calling dmcu

[Why]
DMCU firmware is not required - the system is expected to run
fine without it.  Therefore, wherever dmcu functions could be
called, dmcu initialization shoudl be checked

[How]
Use the helpful hook dmcu_funcs->is_dmcu_initialized

Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix gamma not being applied correctly

[why]
Gamma was always being set as identity on SDR monitor,
leading to no changes in gamma. This caused nightlight to
not apply correctly.

[how]
Added a default gamma structure to compare against
in the sdr case.

Signed-off-by: Murton Liu <murton.liu@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: make underflow status clear explicit

[why]
HUBP underflow is never cleared, which causes underflow in one
test to fail another test, violating the independence requirements

[how]
Rather than make clearing implicit, we explicitly clear underflow
status in DTN.

Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: expose dentist_get_divider_from_did

expose this functions for future use.

Signed-off-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: resolve minor log problems

[Why]
dc_add_stream_to_context is used to check bw requirement.
It is not an error if it fails.

[How]
Replace DC_ERROR with DC_LOG_WARNING.

Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove dc_stream_state->status

[Why]
dc_state has an array of dc_stream_status that contain
pointers to the dc_plane_state and other useful information

Confusingly, dc_stream_state also contains a dc_stream_status
called status.  This struct was partially initialized and
used in a few places

[How]
stream->status.link has been replaced with stream->sink->link.
If a stream does not have a sink, or a sink does not have a link,
something has gone seriously wrong

All other properties of stream->status were zeroed by kzalloc
and never initialized, so they have been replaced by the number 0

This is a refactor: no functional change is intended

Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.05

Signed-off-by: Steven Chiu <steven.chiu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge branch 'drm-next-4.21' of git://people.freedesktop.org/~agd5f/linux into drm-next

New features for 4.21:
amdgpu:
- Support for SDMA paging queue on vega
- Put compute EOP buffers into vram for better performance
- Share more code with amdkfd
- Support for scanout with DCC on gfx9
- Initial kerneldoc for DC
- Updated SMU firmware support for gfx8 chips
- Rework CSA handling for eventual support for preemption
- XGMI PSP support
- Clean up RLC handling
- Enable GPU reset by default on VI, SOC15 dGPUs
- Ring and IB test cleanups

amdkfd:
- Share more code with amdgpu

ttm:
- Move global init out of the drivers

scheduler:
- Track if schedulers are ready for work
- Timeout/fault handling changes to facilitate GPU recovery

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181114165113.3751-1-alexander.deucher@amd.com

Merge tag 'drm-misc-next-2018-11-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v4.21, part 1:

UAPI Changes:
- Add syncobj timeline support to drm.

Cross-subsystem Changes:
- Remove shared fence staging in dma-buf's fence object, and allow
  reserving more than 1 fence and add more paranoia when debugging.
- Constify infoframe functions in video/hdmi.

Core Changes:
- Add vkms todo, and a lot of assorted doc fixes.
- Drop transitional helpers and convert drivers to use drm_atomic_helper_shutdown().
- Move atomic state helper functions to drm_atomic_state_helper.[ch]
- Refactor drm selftests, and add new tests.
- DP MST atomic state cleanups.
- Drop EXPORT_SYMBOL from drm leases.
- Lease cleanups and fixes.
- Create render node for vgem.

Driver Changes:
- Fix build failure in imx without fbdev emulation.
- Add rotation quirk for GPD win2 panel.
- Add support for various CDTech panels, Banana Pi Panel, DLC1010GIG,
  Olimex LCD-O-LinuXino, Samsung S6D16D0, Truly NT35597 WQXGA,
  Himax HX8357D, simulated RTSM AEMv8.
- Add dw_hdmi support to rockchip driver.
- Fix YUV support in vc4.
- Fix resource id handling in virtio.
- Make rockchip use dw-mipi-dsi bridge driver, and add dual dsi support.
- Advertise that tinydrm only supports DRM_FORMAT_MOD_LINEAR.
- Convert many drivers to use atomic helpers, and drm_fbdev_generic_setup().
- Add Mali linear tiled formats, and enable them in the Mali-DP driver.
- Add support for H6 DE3 mixer 0, DW HDMI, HDMI PHY and TCON TOP.
- Assorted driver cleanups and fixes.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/be7ebd91-edd9-8fa4-4286-1c57e3165113@linux.intel.com

Linux 4.20-rc3

Merge tag 'libnvdimm-fixes-4.20-rc3' of git://git./linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm fixes from Dan Williams:
 "A small batch of fixes for v4.20-rc3.

  The overflow continuation fix addresses something that has been broken
  for several releases. Arguably it could wait even longer, but it's a
  one line fix and this finishes the last of the known address range
  scrub bug reports. The revert addresses a lockdep regression. The unit
  tests are not critical to fix, but no reason to hold this fix back.

  Summary:

   - Address Range Scrub overflow continuation handling has been broken
     since it was initially merged. It was only recently that error
     injection and platform-BIOS support enabled this corner case to be
     exercised.

   - The recent attempt to provide more isolation for the kernel Address
     Range Scrub state machine from userapace initiated sessions
     triggers a lockdep report. Revert and try again at the next merge
     window.

   - Fix a kasan reported buffer overflow in libnvdimm unit test
     infrastrucutre (nfit_test)"

* tag 'libnvdimm-fixes-4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  Revert "acpi, nfit: Further restrict userspace ARS start requests"
  acpi, nfit: Fix ARS overflow continuation
  tools/testing/nvdimm: Fix the array size for dimm devices.

Merge branch 'akpm' (patches from Andrew)

Merge misc fixes from Andrew Morton:
 "16 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm/memblock.c: fix a typo in __next_mem_pfn_range() comments
  mm, page_alloc: check for max order in hot path
  scripts/spdxcheck.py: make python3 compliant
  tmpfs: make lseek(SEEK_DATA/SEK_HOLE) return ENXIO with a negative offset
  lib/ubsan.c: don't mark __ubsan_handle_builtin_unreachable as noreturn
  mm/vmstat.c: fix NUMA statistics updates
  mm/gup.c: fix follow_page_mask() kerneldoc comment
  ocfs2: free up write context when direct IO failed
  scripts/faddr2line: fix location of start_kernel in comment
  mm: don't reclaim inodes with many attached pages
  mm, memory_hotplug: check zone_movable in has_unmovable_pages
  mm/swapfile.c: use kvzalloc for swap_info_struct allocation
  MAINTAINERS: update OMAP MMC entry
  hugetlbfs: fix kernel BUG at fs/hugetlbfs/inode.c:444!
  kernel/sched/psi.c: simplify cgroup_move_task()
  z3fold: fix possible reclaim races

Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull scheduler fix from Ingo Molnar:
 "Fix an exec() related scalability/performance regression, which was
  caused by incorrectly calculating load and migrating tasks on exec()
  when they shouldn't be"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Fix cpu_util_wake() for 'execl' type workloads

Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull perf fixes from Ingo Molnar:
 "Fix uncore PMU enumeration for CofeeLake CPUs"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel/uncore: Support CoffeeLake 8th CBOX
  perf/x86/intel/uncore: Add more IMC PCI IDs for KabyLake and CoffeeLake CPUs

Merge branch 'efi-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull EFI fixes from Ingo Molnar:
 "Misc fixes: two warning splat fixes, a leak fix and persistent memory
  allocation fixes for ARM"

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi: Permit calling efi_mem_reserve_persistent() from atomic context
  efi/arm: Defer persistent reservations until after paging_init()
  efi/arm/libstub: Pack FDT after populating it
  efi/arm: Revert deferred unmap of early memmap mapping
  efi: Fix debugobjects warning on 'efi_rts_work'

Merge branch 'spectre' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM spectre updates from Russell King:
 "These are the currently known final bits that resolve the Spectre
  issues. big.Little systems used to be sufficiently identical in that
  there were no differences between individual CPUs in the system that
  mattered to the kernel. With the advent of the Spectre problem, the
  CPUs now have differences in how the workaround is applied.

  As a result of previous Spectre patches, these systems ended up
  reporting quite a lot of:

     "CPUx: Spectre v2: incorrect context switching function, system vulnerable"

  messages due to the action of the big.Little switcher causing the CPUs
  to be re-initialised regularly. This series resolves that issue by
  making the CPU vtable unique to each CPU.

  However, since this is used very early, before per-cpu is setup,
  per-cpu can't be used. We also have a problem that two of the methods
  are not called from preempt-safe paths, but thankfully these remain
  identical between all CPUs in the system. To make sure, we validate
  that these are identical during boot"

* 'spectre' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: spectre-v2: per-CPU vtables to work around big.Little systems
  ARM: add PROC_VTABLE and PROC_TABLE macros
  ARM: clean up per-processor check_bugs method call
  ARM: split out processor lookup
  ARM: make lookup_processor_type() non-__init

mm/memblock.c: fix a typo in __next_mem_pfn_range() comments

Link: http://lkml.kernel.org/r/20181107100247.13359-1-rainccrun@gmail.com
Signed-off-by: Chen Chang <rainccrun@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, page_alloc: check for max order in hot path

Konstantin has noticed that kvmalloc might trigger the following
warning:

  WARNING: CPU: 0 PID: 6676 at mm/vmstat.c:986 __fragmentation_index+0x54/0x60
  [...]
  Call Trace:
   fragmentation_index+0x76/0x90
   compaction_suitable+0x4f/0xf0
   shrink_node+0x295/0x310
   node_reclaim+0x205/0x250
   get_page_from_freelist+0x649/0xad0
   __alloc_pages_nodemask+0x12a/0x2a0
   kmalloc_large_node+0x47/0x90
   __kmalloc_node+0x22b/0x2e0
   kvmalloc_node+0x3e/0x70
   xt_alloc_table_info+0x3a/0x80 [x_tables]
   do_ip6t_set_ctl+0xcd/0x1c0 [ip6_tables]
   nf_setsockopt+0x44/0x60
   SyS_setsockopt+0x6f/0xc0
   do_syscall_64+0x67/0x120
   entry_SYSCALL_64_after_hwframe+0x3d/0xa2

the problem is that we only check for an out of bound order in the slow
path and the node reclaim might happen from the fast path already.  This
is fixable by making sure that kvmalloc doesn't ever use kmalloc for
requests that are larger than KMALLOC_MAX_SIZE but this also shows that
the code is rather fragile.  A recent UBSAN report just underlines that
by the following report

  UBSAN: Undefined behaviour in mm/page_alloc.c:3117:19
  shift exponent 51 is too large for 32-bit type 'int'
  CPU: 0 PID: 6520 Comm: syz-executor1 Not tainted 4.19.0-rc2 #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
  Call Trace:
   __dump_stack lib/dump_stack.c:77 [inline]
   dump_stack+0xd2/0x148 lib/dump_stack.c:113
   ubsan_epilogue+0x12/0x94 lib/ubsan.c:159
   __ubsan_handle_shift_out_of_bounds+0x2b6/0x30b lib/ubsan.c:425
   __zone_watermark_ok+0x2c7/0x400 mm/page_alloc.c:3117
   zone_watermark_fast mm/page_alloc.c:3216 [inline]
   get_page_from_freelist+0xc49/0x44c0 mm/page_alloc.c:3300
   __alloc_pages_nodemask+0x21e/0x640 mm/page_alloc.c:4370
   alloc_pages_current+0xcc/0x210 mm/mempolicy.c:2093
   alloc_pages include/linux/gfp.h:509 [inline]
   __get_free_pages+0x12/0x60 mm/page_alloc.c:4414
   dma_mem_alloc+0x36/0x50 arch/x86/include/asm/floppy.h:156
   raw_cmd_copyin drivers/block/floppy.c:3159 [inline]
   raw_cmd_ioctl drivers/block/floppy.c:3206 [inline]
   fd_locked_ioctl+0xa00/0x2c10 drivers/block/floppy.c:3544
   fd_ioctl+0x40/0x60 drivers/block/floppy.c:3571
   __blkdev_driver_ioctl block/ioctl.c:303 [inline]
   blkdev_ioctl+0xb3c/0x1a30 block/ioctl.c:601
   block_ioctl+0x105/0x150 fs/block_dev.c:1883
   vfs_ioctl fs/ioctl.c:46 [inline]
   do_vfs_ioctl+0x1c0/0x1150 fs/ioctl.c:687
   ksys_ioctl+0x9e/0xb0 fs/ioctl.c:702
   __do_sys_ioctl fs/ioctl.c:709 [inline]
   __se_sys_ioctl fs/ioctl.c:707 [inline]
   __x64_sys_ioctl+0x7e/0xc0 fs/ioctl.c:707
   do_syscall_64+0xc4/0x510 arch/x86/entry/common.c:290
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

Note that this is not a kvmalloc path.  It is just that the fast path
really depends on having sanitzed order as well.  Therefore move the
order check to the fast path.

Link: http://lkml.kernel.org/r/20181113094305.GM15120@dhcp22.suse.cz
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reported-by: Kyungtae Kim <kt0755@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Aaron Lu <aaron.lu@intel.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Byoungyoung Lee <lifeasageek@gmail.com>
Cc: "Dae R. Jeong" <threeearcat@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

scripts/spdxcheck.py: make python3 compliant

Without this change the following happens when using Python3 (3.6.6):

$ echo "GPL-2.0" | python3 scripts/spdxcheck.py -
FAIL: 'str' object has no attribute 'decode'
Traceback (most recent call last):
  File "scripts/spdxcheck.py", line 253, in <module>
    parser.parse_lines(sys.stdin, args.maxlines, '-')
  File "scripts/spdxcheck.py", line 171, in parse_lines
    line = line.decode(locale.getpreferredencoding(False), errors='ignore')
AttributeError: 'str' object has no attribute 'decode'

So as the line is already a string, there is no need to decode it and
the line can be dropped.

/usr/bin/python on Arch is Python 3.  So this would indeed be worth
going into 4.19.

Link: http://lkml.kernel.org/r/20181023070802.22558-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Joe Perches <joe@perches.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tmpfs: make lseek(SEEK_DATA/SEK_HOLE) return ENXIO with a negative offset

Other filesystems such as ext4, f2fs and ubifs all return ENXIO when
lseek (SEEK_DATA or SEEK_HOLE) requests a negative offset.

man 2 lseek says

:      EINVAL whence  is  not  valid.   Or: the resulting file offset would be
:             negative, or beyond the end of a seekable device.
:
:      ENXIO  whence is SEEK_DATA or SEEK_HOLE, and the file offset is  beyond
:             the end of the file.

Make tmpfs return ENXIO under these circumstances as well.  After this,
tmpfs also passes xfstests's generic/448.

[akpm@linux-foundation.org: rewrite changelog]
Link: http://lkml.kernel.org/r/1540434176-14349-1-git-send-email-yuyufen@huawei.com
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Hugh Dickins <hughd@google.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/ubsan.c: don't mark __ubsan_handle_builtin_unreachable as noreturn

gcc-8 complains about the prototype for this function:

  lib/ubsan.c:432:1: error: ignoring attribute 'noreturn' in declaration of a built-in function '__ubsan_handle_builtin_unreachable' because it conflicts with attribute 'const' [-Werror=attributes]

This is actually a GCC's bug. In GCC internals
__ubsan_handle_builtin_unreachable() declared with both 'noreturn' and
'const' attributes instead of only 'noreturn':

   https://gcc.gnu.org/bugzilla/show_bug.cgi?id=84210

Workaround this by removing the noreturn attribute.

[aryabinin: add information about GCC bug in changelog]
Link: http://lkml.kernel.org/r/20181107144516.4587-1-aryabinin@virtuozzo.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Acked-by: Olof Johansson <olof@lixom.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/vmstat.c: fix NUMA statistics updates

Scan through the whole array to see if an update is needed.  While we're
at it, use sizeof() to be safe against any possible type changes in the
future.

The bug here is that we wouldn't sync per-cpu counters into global ones
if there was an update of numa_stats for higher cpus.  Highly
theoretical one though because it is much more probable that zone_stats
are updated so we would refresh anyway.  So I wouldn't bother to mark
this for stable, yet something nice to fix.

[mhocko@suse.com: changelog enhancement]
Link: http://lkml.kernel.org/r/1541601517-17282-1-git-send-email-janne.huttunen@nokia.com
Fixes: 1d90ca897cb0 ("mm: update NUMA counter threshold size")
Signed-off-by: Janne Huttunen <janne.huttunen@nokia.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/gup.c: fix follow_page_mask() kerneldoc comment

Commit df06b37ffe5a ("mm/gup: cache dev_pagemap while pinning pages")
modified the signature of follow_page_mask() but left the parameter
description behind.

Update the description to make the code and comments agree again.

While at it, update formatting of the return value description to match
Documentation/doc-guide/kernel-doc.rst guidelines.

Link: http://lkml.kernel.org/r/1541603316-27832-1-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2: free up write context when direct IO failed

The write context should also be freed even when direct IO failed.
Otherwise a memory leak is introduced and entries remain in
oi->ip_unwritten_list causing the following BUG later in unlink path:

  ERROR: bug expression: !list_empty(&oi->ip_unwritten_list)
  ERROR: Clear inode of 215043, inode has unwritten extents
  ...
  Call Trace:
  ? __set_current_blocked+0x42/0x68
  ocfs2_evict_inode+0x91/0x6a0 [ocfs2]
  ? bit_waitqueue+0x40/0x33
  evict+0xdb/0x1af
  iput+0x1a2/0x1f7
  do_unlinkat+0x194/0x28f
  SyS_unlinkat+0x1b/0x2f
  do_syscall_64+0x79/0x1ae
  entry_SYSCALL_64_after_hwframe+0x151/0x0

This patch also logs, with frequency limit, direct IO failures.

Link: http://lkml.kernel.org/r/20181102170632.25921-1-wen.gang.wang@oracle.com
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Changwei Ge <ge.changwei@h3c.com>
Reviewed-by: Joseph Qi <jiangqi903@gmail.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

scripts/faddr2line: fix location of start_kernel in comment

Fix a source file reference location to the correct path name.

Link: http://lkml.kernel.org/r/1d50bd3d-178e-dcd8-779f-9711887440eb@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: don't reclaim inodes with many attached pages

Spock reported that commit 172b06c32b94 ("mm: slowly shrink slabs with a
relatively small number of objects") leads to a regression on his setup:
periodically the majority of the pagecache is evicted without an obvious
reason, while before the change the amount of free memory was balancing
around the watermark.

The reason behind is that the mentioned above change created some
minimal background pressure on the inode cache.  The problem is that if
an inode is considered to be reclaimed, all belonging pagecache page are
stripped, no matter how many of them are there.  So, if a huge
multi-gigabyte file is cached in the memory, and the goal is to reclaim
only few slab objects (unused inodes), we still can eventually evict all
gigabytes of the pagecache at once.

The workload described by Spock has few large non-mapped files in the
pagecache, so it's especially noticeable.

To solve the problem let's postpone the reclaim of inodes, which have
more than 1 attached page.  Let's wait until the pagecache pages will be
evicted naturally by scanning the corresponding LRU lists, and only then
reclaim the inode structure.

Link: http://lkml.kernel.org/r/20181023164302.20436-1-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Reported-by: Spock <dairinin@gmail.com>
Tested-by: Spock <dairinin@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: <stable@vger.kernel.org> [4.19.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, memory_hotplug: check zone_movable in has_unmovable_pages

Page state checks are racy.  Under a heavy memory workload (e.g.  stress
-m 200 -t 2h) it is quite easy to hit a race window when the page is
allocated but its state is not fully populated yet.  A debugging patch to
dump the struct page state shows

  has_unmovable_pages: pfn:0x10dfec00, found:0x1, count:0x0
  page:ffffea0437fb0000 count:1 mapcount:1 mapping:ffff880e05239841 index:0x7f26e5000 compound_mapcount: 1
  flags: 0x5fffffc0090034(uptodate|lru|active|head|swapbacked)

Note that the state has been checked for both PageLRU and PageSwapBacked
already.  Closing this race completely would require some sort of retry
logic.  This can be tricky and error prone (think of potential endless
or long taking loops).

Workaround this problem for movable zones at least.  Such a zone should
only contain movable pages.  Commit 15c30bc09085 ("mm, memory_hotplug:
make has_unmovable_pages more robust") has told us that this is not
strictly true though.  Bootmem pages should be marked reserved though so
we can move the original check after the PageReserved check.  Pages from
other zones are still prone to races but we even do not pretend that
memory hotremove works for those so pre-mature failure doesn't hurt that
much.

Link: http://lkml.kernel.org/r/20181106095524.14629-1-mhocko@kernel.org
Fixes: 15c30bc09085 ("mm, memory_hotplug: make has_unmovable_pages more robust")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Baoquan He <bhe@redhat.com>
Tested-by: Baoquan He <bhe@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/swapfile.c: use kvzalloc for swap_info_struct allocation

Commit a2468cc9bfdf ("swap: choose swap device according to numa node")
changed 'avail_lists' field of 'struct swap_info_struct' to an array.
In popular linux distros it increased size of swap_info_struct up to 40
Kbytes and now swap_info_struct allocation requires order-4 page.
Switch to kvzmalloc allows to avoid unexpected allocation failures.

Link: http://lkml.kernel.org/r/fc23172d-3c75-21e2-d551-8b1808cbe593@virtuozzo.com
Fixes: a2468cc9bfdf ("swap: choose swap device according to numa node")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Acked-by: Aaron Lu <aaron.lu@intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Huang Ying <ying.huang@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: update OMAP MMC entry

Jarkko's e-mail address hasn't worked for a long time.  We still want to
keep this driver working as it is critical for some of the OMAP boards.
I use and test this driver frequently, so change myself as a maintainer
with "Odd Fixes" status.

Link: http://lkml.kernel.org/r/20181106222750.12939-1-aaro.koskinen@iki.fi
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hugetlbfs: fix kernel BUG at fs/hugetlbfs/inode.c:444!

This bug has been experienced several times by the Oracle DB team.  The
BUG is in remove_inode_hugepages() as follows:

/*
 * If page is mapped, it was faulted in after being
 * unmapped in caller.  Unmap (again) now after taking
 * the fault mutex.  The mutex will prevent faults
 * until we finish removing the page.
 *
 * This race can only happen in the hole punch case.
 * Getting here in a truncate operation is a bug.
 */
if (unlikely(page_mapped(page))) {
BUG_ON(truncate_op);

In this case, the elevated map count is not the result of a race.
Rather it was incorrectly incremented as the result of a bug in the huge
pmd sharing code.  Consider the following:

 - Process A maps a hugetlbfs file of sufficient size and alignment
   (PUD_SIZE) that a pmd page could be shared.

 - Process B maps the same hugetlbfs file with the same size and
   alignment such that a pmd page is shared.

 - Process B then calls mprotect() to change protections for the mapping
   with the shared pmd. As a result, the pmd is 'unshared'.

 - Process B then calls mprotect() again to chage protections for the
   mapping back to their original value. pmd remains unshared.

 - Process B then forks and process C is created. During the fork
   process, we do dup_mm -> dup_mmap -> copy_page_range to copy page
   tables. Copying page tables for hugetlb mappings is done in the
   routine copy_hugetlb_page_range.

In copy_hugetlb_page_range(), the destination pte is obtained by:

dst_pte = huge_pte_alloc(dst, addr, sz);

If pmd sharing is possible, the returned pointer will be to a pte in an
existing page table.  In the situation above, process C could share with
either process A or process B.  Since process A is first in the list,
the returned pte is a pointer to a pte in process A's page table.

However, the check for pmd sharing in copy_hugetlb_page_range is:

/* If the pagetables are shared don't copy or take references */
if (dst_pte == src_pte)
continue;

Since process C is sharing with process A instead of process B, the
above test fails.  The code in copy_hugetlb_page_range which follows
assumes dst_pte points to a huge_pte_none pte.  It copies the pte entry
from src_pte to dst_pte and increments this map count of the associated
page.  This is how we end up with an elevated map count.

To solve, check the dst_pte entry for huge_pte_none.  If !none, this
implies PMD sharing so do not copy.

Link: http://lkml.kernel.org/r/20181105212315.14125-1-mike.kravetz@oracle.com
Fixes: c5c99429fa57 ("fix hugepages leak due to pagetable page sharing")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Prakash Sangappa <prakash.sangappa@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel/sched/psi.c: simplify cgroup_move_task()

The existing code triggered an invalid warning about 'rq' possibly being
used uninitialized.  Instead of doing the silly warning suppression by
initializa it to NULL, refactor the code to bail out early instead.

Warning was:

  kernel/sched/psi.c: In function `cgroup_move_task':
  kernel/sched/psi.c:639:13: warning: `rq' may be used uninitialized in this function [-Wmaybe-uninitialized]

Link: http://lkml.kernel.org/r/20181103183339.8669-1-olof@lixom.net
Fixes: 2ce7135adc9ad ("psi: cgroup support")
Signed-off-by: Olof Johansson <olof@lixom.net>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

z3fold: fix possible reclaim races

Reclaim and free can race on an object which is basically fine but in
order for reclaim to be able to map "freed" object we need to encode
object length in the handle.  handle_to_chunks() is then introduced to
extract object length from a handle and use it during mapping.

Moreover, to avoid racing on a z3fold "headless" page release, we should
not try to free that page in z3fold_free() if the reclaim bit is set.
Also, in the unlikely case of trying to reclaim a page being freed, we
should not proceed with that page.

While at it, fix the page accounting in reclaim function.

This patch supersedes "[PATCH] z3fold: fix reclaim lock-ups".

Link: http://lkml.kernel.org/r/20181105162225.74e8837d03583a9b707cf559@gmail.com
Signed-off-by: Vitaly Wool <vitaly.vul@sony.com>
Signed-off-by: Jongseok Kim <ks77sj@gmail.com>
Reported-by-by: Jongseok Kim <ks77sj@gmail.com>
Reviewed-by: Snild Dolkow <snild@sony.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'fsnotify_for_v4.20-rc3' of git://git./linux/kernel/git/jack/linux-fs

Pull fsnotify fix from Jan Kara:
 "One small fsnotify fix for duplicate events"

* tag 'fsnotify_for_v4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  fanotify: fix handling of events on child sub-directory

Merge tag 'gfs2-4.20.fixes3' of git://git./linux/kernel/git/gfs2/linux-gfs2

Pull bfs2 fixes from Andreas Gruenbacher:
 "Fix two bugs leading to leaked buffer head references:

   - gfs2: Put bitmap buffers in put_super
   - gfs2: Fix iomap buffer head reference counting bug

  And one bug leading to significant slow-downs when deleting large
  files:

   - gfs2: Fix metadata read-ahead during truncate (2)"

* tag 'gfs2-4.20.fixes3' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: Fix iomap buffer head reference counting bug
  gfs2: Fix metadata read-ahead during truncate (2)
  gfs2: Put bitmap buffers in put_super

gfs2: Fix iomap buffer head reference counting bug

GFS2 passes the inode buffer head (dibh) from gfs2_iomap_begin to
gfs2_iomap_end in iomap->private.  It sets that private pointer in
gfs2_iomap_get.  Users of gfs2_iomap_get other than gfs2_iomap_begin
would have to release iomap->private, but this isn't done correctly,
leading to a leak of buffer head references.

To fix this, move the code for setting iomap->private from
gfs2_iomap_get to gfs2_iomap_begin.

Fixes: 64bc06bb32 ("gfs2: iomap buffered write support")
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6

Pull crypto fixes from Herbert Xu:
 "This fixes the following issues:

   - Potential memory overwrite in simd

   - Kernel info leaks in crypto_user

   - NULL dereference and use-after-free in hisilicon"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: user - Zeroize whole structure given to user space
  crypto: user - fix leaking uninitialized memory to userspace
  crypto: simd - correctly take reqsize of wrapped skcipher into account
  crypto: hisilicon - Fix reference after free of memories on error path
  crypto: hisilicon - Fix NULL dereference for same dst and src

Merge tag 'drm-fixes-2018-11-16' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
 "Live from Vancouver, SoC maintainer talk, this weeks drm fixes pull
  for rc3:

  omapdrm:
   - regression fixes for the reordering bridge stuff that went into rc1

  i915:
   - incorrect EU count fix
   - HPD storm fix
   - MST fix
   - relocation fix for gen4/5

  amdgpu:
   - huge page handling fix
   - IH ring setup
   - XGMI aperture setup
   - watermark setup fix

  misc:
   - docs and MST fix"

* tag 'drm-fixes-2018-11-16' of git://anongit.freedesktop.org/drm/drm: (23 commits)
  drm/i915: Account for scale factor when calculating initial phase
  drm/i915: Clean up skl_program_scaler()
  drm/i915: Move programming plane scaler to its own function.
  drm/i915/icl: Drop spurious register read from icl_dbuf_slices_update
  drm/i915: fix broadwell EU computation
  drm/amdgpu: fix huge page handling on Vega10
  drm/amd/pp: Fix truncated clock value when set watermark
  drm/amdgpu: fix bug with IH ring setup
  drm/meson: venc: dmt mode must use encp
  drm/amdgpu: set system aperture to cover whole FB region
  drm/i915: Fix hpd handling for pins with two encoders
  drm/i915/execlists: Force write serialisation into context image vs execution
  drm/i915/icl: Fix power well 2 wrt. DC-off toggling order
  drm/i915: Fix NULL deref when re-enabling HPD IRQs on systems with MST
  drm/i915: Fix possible race in intel_dp_add_mst_connector()
  drm/i915/ringbuffer: Delay after EMIT_INVALIDATE for gen4/gen5
  drm/omap: dsi: Fix missing of_platform_depopulate()
  drm/omap: Move DISPC runtime PM handling to omapdrm
  drm/omap: dsi: Ensure the device is active during probe
  drm/omap: hdmi4: Ensure the device is active during bind
  ...

Merge tag 'powerpc-4.20-3' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:
 "Two weeks worth of fixes since rc1.

   - I broke 16-byte alignment of the stack when we moved PPR into
     pt_regs. Despite being required by the ABI this broke almost
     nothing, we eventually hit it in code where GCC does arithmetic on
     the stack pointer assuming the bottom 4 bits are clear. Fix it by
     padding the in-kernel pt_regs by 8 bytes.

   - A couple of commits fixing minor bugs in the recent SLB rewrite.

   - A build fix related to tracepoints in KVM in some configurations.

   - Our old "IO workarounds" code written for Cell couldn't coexist in
     a kernel that runs on Power9 with the Radix MMU, fix that.

   - Remove the NPU DMA ops, these just printed a warning and should
     never have been called.

   - Suppress an overly chatty message triggered by CPU hotplug in some
     configs.

   - Two small selftest fixes.

  Thanks to: Alistair Popple, Gustavo Romero, Nicholas Piggin, Satheesh
  Rajendran, Scott Wood"

* tag 'powerpc-4.20-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  selftests/powerpc: Adjust wild_bctr to build with old binutils
  powerpc/64: Fix kernel stack 16-byte alignment
  powerpc/numa: Suppress "VPHN is not supported" messages
  selftests/powerpc: Fix wild_bctr test to work on ppc64
  powerpc/io: Fix the IO workarounds code to work with Radix
  powerpc/mm/64s: Fix preempt warning in slb_allocate_kernel()
  KVM: PPC: Move and undef TRACE_INCLUDE_PATH/FILE
  powerpc/mm/64s: Only use slbfee on CPUs that support it
  powerpc/mm/64s: Use PPC_SLBFEE macro
  powerpc/mm/64s: Consolidate SLB assertions
  powerpc/powernv/npu: Remove NPU DMA ops

Merge tag 'xtensa-20181115' of git://github.com/jcmvbkbc/linux-xtensa

Pull Xtensa fixes from Max Filippov:

 - fix stack alignment for bFLT binaries.

 - fix physical-to-virtual address translation for boot parameters in
   MMUv3 256+256 and 512+512 virtual memory layouts.

* tag 'xtensa-20181115' of git://github.com/jcmvbkbc/linux-xtensa:
  xtensa: fix boot parameters address translation
  xtensa: make sure bFLT stack is 16 byte aligned

Merge tag 'for-linus-20181115' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:

 - Discard loop fix, caused by integer overflow (Dave)

 - Blacklist of Samsung drive that hangs with power management (Diego)

 - Copy bio priority when cloning it (Hannes)

 - Fix race condition exposed in floppy (me)

 - Fix SCSI queue cleanup regression. While elusive, it caused oopses in
   queue running (Ming)

 - Fix bad string copy in kyber tracing (Omar)

* tag 'for-linus-20181115' of git://git.kernel.dk/linux-block:
  SCSI: fix queue cleanup race before queue initialization is done
  block: fix 32 bit overflow in __blkdev_issue_discard()
  libata: blacklist SAMSUNG MZ7TD256HAFV-000L9 SSD
  block: copy ioprio in __bio_clone_fast() and bounce
  kyber: fix wrong strlcpy() size in trace_kyber_latency()
  floppy: fix race condition in __floppy_read_block_0()

Merge tag 'fuse-fixes-4.20-rc3' of git://git./linux/kernel/git/mszeredi/fuse

Pull fuse fixes from Miklos Szeredi:
 "A couple of fixes, all bound for -stable (i.e. not regressions in this
  cycle)"

* tag 'fuse-fixes-4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: fix use-after-free in fuse_direct_IO()
  fuse: fix possibly missed wake-up after abort
  fuse: fix leaked notify reply

Merge tag 'drm-intel-fixes-2018-11-15' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- Fix Bugzilla #108712: Fix incorrect EU count report from kernel
- Fix to account for scale factor when calculating initial phase on scaled output
- Avoid too trigger-happy HPD storm detection and fix a race and an OOPS for MST systems.
- Relocation race fix for Gen4/5
- A couple ICL fixes and dependencies for above Fixes:.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181115164709.GA13430@jlahtine-desk.ger.corp.intel.com

Merge tag 'selinux-pr-20181115' of git://git./linux/kernel/git/pcmoore/selinux

Pull SELinux fixes from Paul Moore:
 "Two small SELinux fixes for v4.20.

  Ondrej's patch adds a check on user input, and my patch ensures we
  don't look past the end of a buffer.

  Both patches are quite small and pass the selinux-testsuite"

* tag 'selinux-pr-20181115' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: fix non-MLS handling in mls_context_to_sid()
  selinux: check length properly in SCTP bind hook

Merge tag 'pinctrl-v4.20-2' of git://git./linux/kernel/git/linusw/linux-pinctrl

Pull pin control fixes from Linus Walleij:

 - A bunch of fixes for the Allwinner meson platform

 - Establish a git repo for Intel pin control in MAINTAINERS

* tag 'pinctrl-v4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  MAINTAINERS: Add tree link for Intel pin control driver
  pinctrl: meson: fix meson8b ao pull register bits
  pinctrl: meson: fix meson8 ao pull register bits
  pinctrl: meson: fix gxl ao pull register bits
  pinctrl: meson: fix gxbb ao pull register bits
  pinctrl: meson: fix pinconf bias disable

Merge tag 'nfs-for-4.20-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client bugfixes from Trond Myklebust:
 "Highlights include:

 Stable fixes:

   - Don't exit the NFSv4 state manager without clearing
     NFS4CLNT_MANAGER_RUNNING

  Bugfixes:

   - Fix an Oops when destroying the RPCSEC_GSS credential cache

   - Fix an Oops during delegation callbacks

   - Ensure that the NFSv4 state manager exits the loop on SIGKILL

   - Fix a bogus get/put in generic_key_to_expire()"

* tag 'nfs-for-4.20-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFSv4: Fix an Oops during delegation callbacks
  SUNRPC: Fix a bogus get/put in generic_key_to_expire()
  SUNRPC: Fix a Oops when destroying the RPCSEC_GSS credential cache
  NFSv4: Ensure that the state manager exits the loop on SIGKILL
  NFSv4: Don't exit the state manager without clearing NFS4CLNT_MANAGER_RUNNING

Merge branch 'drm-fixes-4.20' of git://people.freedesktop.org/~agd5f/linux into drm-fixes

Fixes for 4.20:
- Fix for huge page handling that caused a GPUVM fault in some cases
- Fix IH ring setup
- Fix for xgmi aperture setup
- Fix for watermark setup for SMU

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181114171853.2866-1-alexander.deucher@amd.com

Merge tag 'drm-misc-fixes-2018-11-14' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

Cross-subsystem:
- omap: Instantiate dss children in omapdss instead of mach (Laurent)

Other:
- htmldocs build warning (Sean)
- MST NULL deref fix (Stanislav)
- omap: Various runtime ref gets on probe/bind (Laurent)
- omap: Fix to the above dss children patch (Tony)

Cc: Sean Paul <sean@poorly.run>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20181114204542.GA52569@art_vandelay

selftests/powerpc: Adjust wild_bctr to build with old binutils

Currently the selftest wild_bctr can fail to build when an old gcc is
used, notably on gcc using a binutils version <= 2.27, because the
assembler does not support the integer suffix UL.

This patch adjusts the wild_bctr test so the REG_POISON value is still
treated as an unsigned long for the shifts on compilation but the UL
suffix is absent on the stringification, so the inline asm code
generated has no UL suffixes.

Signed-off-by: Gustavo Romero <gromero@linux.vnet.ibm.com>
[mpe: Wrap long line]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

drm/i915: Account for scale factor when calculating initial phase

To get the initial phase correct we need to account for the scale
factor as well. I forgot this initially and was mostly looking at
heavily upscaled content where the minor difference between -0.5
and the proper initial phase was not readily apparent.

And let's toss in a comment that tries to explain the formula
a little bit.

v2: The initial phase upper limit is 1.5, not 24.0!

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: 0a59952b24e2 ("drm/i915: Configure SKL+ scaler initial phase correctly")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181029181820.21956-1-ville.syrjala@linux.intel.com
Tested-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Tested-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #irc
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #irc
(cherry picked from commit e7a278a329dd8aa2c70c564849f164cb5673689c)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Clean up skl_program_scaler()

Remove the "sizes are 0 based" stuff that is not even true for the
scaler.

v2: Rebase

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181101151736.20522-1-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit d0105af939769393d6447a04cee2d1ae12e3f09a)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Move programming plane scaler to its own function.

This cleans the code up slightly, and will make other changes easier.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180920102711.4184-8-maarten.lankhorst@linux.intel.com
(cherry picked from commit ab5c60bf76755d24ae8de5c1c6ac594934656ace)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

efi: Permit calling efi_mem_reserve_persistent() from atomic context

Currently, efi_mem_reserve_persistent() may not be called from atomic
context, since both the kmalloc() call and the memremap() call may
sleep.

The kmalloc() call is easy enough to fix, but the memremap() call
needs to be moved into an init hook since we cannot control the
memory allocation behavior of memremap() at the call site.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20181114175544.12860-6-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

efi/arm: Defer persistent reservations until after paging_init()

The new memory EFI reservation feature we introduced to allow memory
reservations to persist across kexec may trigger an unbounded number
of calls to memblock_reserve(). The memblock subsystem can deal with
this fine, but not before memblock resizing is enabled, which we can
only do after paging_init(), when the memory we reallocate the array
into is actually mapped.

So break out the memreserve table processing into a separate routine
and call it after paging_init() on arm64. On ARM, because of limited
reviewing bandwidth of the maintainer, we cannot currently fix this,
so instead, disable the EFI persistent memreserve entirely on ARM so
we can fix it later.

Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20181114175544.12860-5-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

efi/arm/libstub: Pack FDT after populating it

Commit:

  24d7c494ce46 ("efi/arm-stub: Round up FDT allocation to mapping size")

increased the allocation size for the FDT image created by the stub to a
fixed value of 2 MB, to simplify the former code that made several
attempts with increasing values for the size. This is reasonable
given that the allocation is of type EFI_LOADER_DATA, which is released
to the kernel unless it is explicitly memblock_reserve()d by the early
boot code.

However, this allocation size leaked into the 'size' field of the FDT
header metadata, and so the entire allocation remains occupied by the
device tree binary, even if most of it is not used to store device tree
information.

So call fdt_pack() to shrink the FDT data structure to its minimum size
after populating all the fields, so that the remaining memory is no
longer wasted.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: <stable@vger.kernel.org> # v4.12+
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Fixes: 24d7c494ce46 ("efi/arm-stub: Round up FDT allocation to mapping size")
Link: http://lkml.kernel.org/r/20181114175544.12860-4-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

efi/arm: Revert deferred unmap of early memmap mapping

Commit:

  3ea86495aef2 ("efi/arm: preserve early mapping of UEFI memory map longer for BGRT")

deferred the unmap of the early mapping of the UEFI memory map to
accommodate the ACPI BGRT code, which looks up the memory type that
backs the BGRT table to validate it against the requirements of the UEFI spec.

Unfortunately, this causes problems on ARM, which does not permit
early mappings to persist after paging_init() is called, resulting
in a WARN() splat. Since we don't support the BGRT table on ARM anway,
let's revert ARM to the old behaviour, which is to take down the
early mapping at the end of efi_init().

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Fixes: 3ea86495aef2 ("efi/arm: preserve early mapping of UEFI memory ...")
Link: http://lkml.kernel.org/r/20181114175544.12860-3-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

efi: Fix debugobjects warning on 'efi_rts_work'

The following commit:

  9dbbedaa6171 ("efi: Make efi_rts_work accessible to efi page fault handler")

converted 'efi_rts_work' from an auto variable to a global variable.
However, when submitting the work, INIT_WORK_ONSTACK() was still used,
causing the following complaint from debugobjects:

  ODEBUG: object 00000000ed27b500 is NOT on stack 00000000c7d38760, but annotated.

Change the macro to just INIT_WORK() to eliminate the warning.

Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Fixes: 9dbbedaa6171 ("efi: Make efi_rts_work accessible to efi page fault handler")
Link: http://lkml.kernel.org/r/20181114175544.12860-2-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

powerpc/64: Fix kernel stack 16-byte alignment

Commit 4c2de74cc869 ("powerpc/64: Interrupts save PPR on stack rather
than thread_struct") changed sizeof(struct pt_regs) % 16 from 0 to 8,
which causes the interrupt frame allocation on kernel entry to put the
kernel stack out of alignment.

Quadword (16-byte) alignment for the stack is required by both the
64-bit v1 ABI (v1.9 § 3.2.2) and the 64-bit v2 ABI (v1.1 § 2.2.2.1).

Add a pad field to fix alignment, and add a BUILD_BUG_ON to catch this
in future.

Fixes: 4c2de74cc869 ("powerpc/64: Interrupts save PPR on stack rather than thread_struct")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>