x86: 64-bit, make sparsemem vmemmap the only memory model

Use sparsemem as the only memory model for UP, SMP and NUMA.  Measurements
indicate that DISCONTIGMEM has a higher overhead than sparsemem.  And
FLATMEMs benefits are minimal.  So I think its best to simply standardize
on sparsemem.

Results of page allocator tests (test can be had via git from slab git
tree branch tests)

Measurements in cycle counts. 1000 allocations were performed and then the
average cycle count was calculated.

Order FlatMem Discontig SparseMem
0   639   665   641
1   567   647   593
2   679   774   692
3   763   967   781
4   961  1501   962
5  1356  2344  1392
6  2224  3982  2336
7  4869  7225  5074
8 12500 14048 12732
9 27926 28223 28165
10 58578 58714 58682

(Note that FlatMem is an SMP config and the rest NUMA configurations)

Memory use:

SMP Sparsemem
-------------

Kernel size:

   text    data     bss     dec     hex filename
3849268  397739 1264856 5511863  541ab7 vmlinux

             total       used       free     shared    buffers     cached
Mem:       8242252      41164    8201088          0        352      11512
-/+ buffers/cache:      29300    8212952
Swap:      9775512          0    9775512

SMP Flatmem
-----------

Kernel size:

   text    data     bss     dec     hex filename
3844612  397739 1264536 5506887  540747 vmlinux

So 4.5k growth in text size vs. FLATMEM.

             total       used       free     shared    buffers     cached
Mem:       8244052      40544    8203508          0        352      11484
-/+ buffers/cache:      28708    8215344

2k growth in overall memory use after boot.

NUMA discontig:

   text    data     bss     dec     hex filename
3888124  470659 1276504 5635287  55fcd7 vmlinux

             total       used       free     shared    buffers     cached
Mem:       8256256      56908    8199348          0        352      11496
-/+ buffers/cache:      45060    8211196
Swap:      9775512          0    9775512

NUMA sparse:

   text    data     bss     dec     hex filename
3896428  470659 1276824 5643911  561e87 vmlinux

8k text growth. Given that we fully inline virt_to_page and friends now
that is rather good.

             total       used       free     shared    buffers     cached
Mem:       8264720      57240    8207480          0        352      11516
-/+ buffers/cache:      45372    8219348
Swap:      9775512          0    9775512

The total available memory is increased by 8k.

This patch makes sparsemem the default and removes discontig and
flatmem support from x86.

[ akpm@linux-foundation.org: allnoconfig build fix ]

Acked-by: Andi Kleen <ak@suse.de>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86: vmlinux_32.lds.S: remove repeated comment from the x86-32 linker script

Remove repeated comment from the linker script for the x86-32 target.

Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86: do not set boot cpu in cpu_online_map at x86_64_start_kernel()

In init/main.c boot_cpu_init() does that later.

Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Cc: Zachary Amsden <zach@vmware.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86: set cpu_index to nr_cpus instead of 0

Some BIOSes that support two/four dualcore/quadcore systems, will get:

ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
Processor #2 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
Processor #3 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)

SMP: Allowing 16 CPUs, 12 hotplug CPUs

the /proc/cpuinfo will show a bunch of NULL cpus with cpu_index=0

so assign impossible cpu_index value at first instead of 0.

Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86: sanitize user specified e820 memmap values

Sanitize user specified e820 memory ranges, using the same logic that is
applied to the values returned by the BIOS.  This ensures consistent
handling regardless of the source of the memory mappings.

Allows overriding portions of the memory map without specifying one in
it's entirety (memmap=exactmap).

E.g. marking a range of bad RAM as reserved with memmap=48M$528M

BIOS supplied range

BIOS-e820: 0000000000100000 - 000000007fe80000 (usable)

becomes

user: 0000000000100000 - 0000000021000000 (usable)
user: 0000000021000000 - 0000000024000000 (reserved)
user: 0000000024000000 - 000000007fe80000 (usable)

Previously this did not work, as the original BIOS range was left
untouched while the user defined range was appended to the end of the
memory map.

[ tglx: arch/x86 adaptation ]

Signed-off-by: Vladimir Berezniker <vmpn@hitechman.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86: TLS cleanup

This consolidates the four different places that implemented the same
encoding magic for the GDT-slot 32-bit TLS support.  The old tls32.c was
renamed and is now only slightly modified to be the shared implementation.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Zachary Amsden <zach@vmware.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86: tls32 moved

This renames arch/x86/ia32/tls32.c to arch/x86/kernel/tls.c, which does
nothing now but paves the way to consolidate this code for 32-bit too.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Zachary Amsden <zach@vmware.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86: desc_empty

This replaces the desc_empty macro with an inline.  It now handles
easily any of the four different types used between 32/64 code to
refer to these 8 bytes.  It's identical in both asm-x86/processor_64.h
and asm-x86/processor_32.h, so if these files ever get merged this
function can be in the common code.

This also removes the desc_equal macro because nothing uses it.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86: ptrace fs/gs_base

The fs_base and gs_base fields are available in user_regs_struct.
But reading these via ptrace (PTRACE_GETREGS or PTRACE_PEEKUSR) does
not give a reliably useful value.  The thread_struct fields are 0
when do_arch_prctl decided to use a GDT slot instead of MSR_FS_BASE,
which it does for a value under 1<<32.

This changes ptrace access to fs_base and gs_base to work like
PTRACE_ARCH_PRCTL does.  That is, it reads the base address that
user-mode memory access using the fs/gs instruction prefixes will
use, regardless of how it's being implemented in the kernel.  The
MSR vs GDT is an implementation detail that is pretty much hidden
from userland in the actual using, and there is no reason that
ptrace should give the internal implementation picture rather than
the user-mode semantic picture.  In the case of setting the value,
this can implicitly change the fsindex/gsindex value (also
separately in user_regs_struct), which is what happens when the
thread calls arch_prctl itself.  In a PTRACE_SETREGS, the fs_base
change will come after the fsindex change due to the order of the
struct, and so a change the debugger made to fs_base will have the
effect intended, another part of the user_regs_struct will now
differ when read back from what the debugger wrote.

This makes PTRACE_ARCH_PRCTL obsolete.  We could consider declaring
it deprecated and removing it one day, though there is no hurry.
For the foreseeable future, debuggers have to assume an old kernel
that does not report reliable fs_base/gs_base values in user_regs_struct
and stick to PTRACE_ARCH_PRCTL anyway.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86: use get_desc_base

This changes a couple of places to use the get_desc_base function.
They were duplicating the same calculation with different equivalent code.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86: get_desc_base

This defines the get_desc_base function in asm-x86/desc_64.h to match the
one in desc_32.h.  If these two files ever get merged together, this
function could be the same in both.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86 vDSO: canonicalize sysenter .eh_frame

Some assembler versions automagically optimize .eh_frame contents,
changing their size.  The CFI in sysenter.S was not using optimal
formatting, so it would be changed by newer/smarter assemblers.
This ran afoul of the wired constant for padding out the other vDSO
images to match its size.  This changes the original hand-coded
source to use the optimal format encoding for its operations.  That
leaves nothing more for a fancy assembler to do, so the sizes will
match the wired-in expected size regardless of the assembler version.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86 vDSO: makefile cleanup

This cleans up the arch/x86/vdso/Makefile rules for vdso.so to
share more code with the vdso32-*.so rules and remove old cruft.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86 vDSO: reorder vdso32 code

This reorders the code in the 32-bit vDSO images to put the signal
trampolines first and __kernel_vsyscall after them.  The order does
not matter to userland, it just uses what AT_SYSINFO or e_entry
says.  Since the signal trampolines are the same size in both
versions of the vDSO, putting them first is the simplest way to get
the addresses to line up.  This makes it work to use a more compact
layout for the vDSO.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86 vDSO: ia32 vsyscall removal

This removes all the old vsyscall code from arch/x86/ia32/ that is
no longer used because arch/x86/vdso/ code has replaced it.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86 vDSO: consolidate vdso32

This makes x86_64's ia32 emulation support share the sources used in the
32-bit kernel for the 32-bit vDSO and much of its setup code.

The 32-bit vDSO mapping now behaves the same on x86_64 as on native 32-bit.
The abi.syscall32 sysctl on x86_64 now takes the same values that
vm.vdso_enabled takes on the 32-bit kernel.  That is, 1 means a randomized
vDSO location, 2 means the fixed old address.  The CONFIG_COMPAT_VDSO
option is now available to make this the default setting, the same meaning
it has for the 32-bit kernel.  (This does not affect the 64-bit vDSO.)

The argument vdso32=[012] can be used on both 32-bit and 64-bit kernels to
set this paramter at boot time.  The vdso=[012] argument still does this
same thing on the 32-bit kernel.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86 vDSO: ia32 vdso32-syscall build

This puts the syscall version of the 32-bit vDSO in arch/x86/vdso/vdso32/
for 64-bit IA32 support.  This is not used yet, but it paves the way for
consolidating the 32-bit vDSO source and build logic all in one place.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86 vDSO: ia32 sysenter_return

This changes the 64-bit kernel's support for the 32-bit sysenter
instruction to use stored fields rather than constants for the
user-mode return address, as the 32-bit kernel does.  This adds a
sysenter_return field to struct thread_info, as 32-bit has.  There
is no observable effect from this yet.  It makes the assembly code
independent of the 32-bit vDSO mapping address, paving the way for
making the vDSO address vary as it does on the 32-bit kernel.

[ akpm@linux-foundation.org: build fix on !CONFIG_IA32_EMULATION ]

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86 vDSO: ia32_sysenter_target

This harmonizes the name for the entry point from the 32-bit sysenter
instruction across 32-bit and 64-bit kernels.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86 vDSO: vdso32 setup

This moves arch/x86/kernel/sysenter_32.c to arch/x86/vdso/vdso32-setup.c,
keeping all the code relating only to vDSO magic in the vdso/ subdirectory.
This is a pure renaming, but it paves the way to consolidating the code for
dealing with 32-bit vDSOs across CONFIG_X86_32 and CONFIG_IA32_EMULATION.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86 vDSO: i386 vdso32 install

This enables 'make vdso_install' for i386 as on x86_64 and powerpc.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86 vDSO: absolute relocs

This updates the exceptions for absolute relocs for the new symbol name
convention used for symbols extracted from the vDSO images.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86 vDSO: i386 vdso32

This makes the i386 kernel use the new vDSO build in arch/x86/vdso/vdso32/
to replace the old one from arch/x86/kernel/.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86 vDSO: vdso32 build

This builds the 32-bit vDSO images in the arch/x86/vdso subdirectory.
Nothing uses the images yet, but this paves the way for consolidating
the vDSO build logic all in one place.  The new images use a linker
script sharing the layout parts from vdso-layout.lds.S with the 64-bit
vDSO.  A new vdso32-syms.lds is generated in the style of vdso-syms.lds.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86 vDSO: arch/x86/vdso/vdso32

This moves the i386 vDSO sources into arch/x86/vdso/vdso32/, a
new directory.  This patch is a pure renaming, but paves the way
for consolidating the vDSO build logic.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86 vDSO: harmonize asm-offsets

This change harmonizes the asm-offsets macros used in the 32-bit vDSO
across 32-bit and 64-bit builds.  It's a purely cosmetic change for now,
but it paves the way for consolidating the 32-bit vDSO builds.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86 vDSO: new layout

This revamps the vDSO linker script to lay things out with the best
packing of the data and good, separate alignment of the code.  The
rigid layout using VDSO_TEXT_OFFSET no longer matters to the kernel.
I've moved the layout parts of the linker script into a new include
file, vdso-layout.lds.S; this is in preparation for sharing the script
for the 32-bit vDSO builds too.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86 vDSO: remove vdso-syms.o

Get rid of vdso-syms.o from the kernel link.  We don't need it any more.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86 vDSO: use vdso-syms.lds

This patch changes the kernel's references to addresses in the vDSO image
to be based on the symbols defined by vdso-syms.lds instead of the old
vdso-syms.o symbols.  This is all wrapped up in a macro defined by the new
asm-x86/vdso.h header; that's the only place in the kernel source that has
to know the details of the scheme for getting vDSO symbol values.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86 vDSO: generate vdso-syms.lds

This patch adds a new way of extracting symbols from the built vDSO image.
This is much simpler and less fragile than using ld -R; it removes the
need to control the DSO layout quite so exactly.  I was clearly unduly
distracted by clever ld uses when I did the original vDSO implementation.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86: randomize brk

Randomize the location of the heap (brk) for i386 and x86_64.  The range is
randomized in the range starting at current brk location up to 0x02000000
offset for both architectures.  This, together with
pie-executable-randomization.patch and
pie-executable-randomization-fix.patch, should make the address space
randomization on i386 and x86_64 complete.

Arjan says:

This is known to break older versions of some emacs variants, whose dumper
code assumed that the last variable declared in the program is equal to the
start of the dynamically allocated memory region.

(The dumper is the code where emacs effectively dumps core at the end of it's
compilation stage; this coredump is then loaded as the main program during
normal use)

iirc this was 5 years or so; we found this way back when I was at RH and we
first did the security stuff there (including this brk randomization).  It
wasn't all variants of emacs, and it got fixed as a result (I vaguely remember
that emacs already had code to deal with it for other archs/oses, just
ifdeffed wrongly).

It's a rare and wrong assumption as a general thing, just on x86 it mostly
happened to be true (but to be honest, it'll break too if gcc does
something fancy or if the linker does a non-standard order).  Still its
something we should at least document.

Note 2: afaik it only broke the emacs *build*.  I'm not 100% sure about that
(it IS 5 years ago) though.

[ akpm@linux-foundation.org: deuglification ]

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Roland McGrath <roland@redhat.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86: extended interrupt LVT support for AMD Barcelona

Also macro definitions in apicdef.h has been updated.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86: untable __init references between IO data

Earlier patch added IO APIC setup into local APIC setup. This caused
modpost warnings. Fix them by untangling setup_local_APIC() and splitting
it into smaller functions. The IO APIC initialization is only called
for the BP init.

Also removed some outdated debugging code and minor cleanup.

[ tglx: arch/x86 adaptation ]

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86: use core id bits for apicid_to_node initialization

We shoud use core id bits instead of max cores, in case later with AMD
downcores Quad core Opteron.

[ tglx: arch/x86 adaptation ]

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86: store core id bits in cpuinfo_x8

We need to store core id bits to cpuinfo_x86 in early_identify_cpu. So we
use it to create acpiid_to_node array in k8topolgy.c

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86: remove -maccumulate-outgoing-args on 32-bit

Contrary to the comment "newer gccs do it by default", newer gcc versions
default to -maccumulate-outgoing-args only with CONFIG_CC_OPTIMIZE_FOR_SIZE=n,
and then only with some CPU settings.

Measured with an i386 defconfig, gcc 4.2.1 and kernel 2.6.23-rc1 ("orig" is
the plain kernel, "changed is with -maccumulate-outgoing-args removed):

$ ls -la vmlinux*
-rwxrwxr-x 1 bunk bunk 6269713 2007-07-24 22:19 vmlinux.changed
-rwxrwxr-x 1 bunk bunk 6425361 2007-07-24 22:19 vmlinux.orig
$ size vmlinux.*
   text    data     bss     dec     hex filename
4493465  504108  614400 5611973  55a1c5 vmlinux.changed
4646160  504108  614400 5764668  57f63c vmlinux.orig
$

That's a 2.5% size increase that does for sure hurt small systems.

If the stack unwinder ever comes back and needs this as indicated in the
comment, adding it to the cflags when the user enabled the unwinder should be
a better option.

[ tglx: arch/x86 adaptation ]

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86: clear IO_APIC before enabing apic error vector.

4 socket quad core, 8 socket quad core will do apic ID lifting for BSP.

But io-apic regs for ExtINT still use 0 as dest.

so when we enable apic error vector in BSP, we will get one APIC error.

CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0/4 -> Node 0
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
enabled ExtINT on CPU#0
ESR value after enabling vector: 00000000, after 0000000c
APIC error on CPU0: 0c(08)
ENABLING IO-APIC IRQs
Synchronizing Arb IDs.

So move enable_IO_APIC from setup_IO_APIC into setup_local_APIC and call it
before enabling the ACPI error vector.

[ tglx: arch/x86 adaptation ]

Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86: cleanup kernel/setup_64.c

Clean it up before applying more patches to it.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: remove unused tsk_thread from asm-offsets_64.c

So this patch simply removes the "thread" from asm-offsets.c since I
can't find an owner for it.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86: use CR0 defines.

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: merge resume-trace.h variants

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: merge topology.h variants

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: consolidate toloplogy_32/64.h

Reorder defines and do white space / coding style cleanups
to get a readable diff.

Also convert the macros to inline functions. Move the pci
related inlines to pci.h

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: adjust numa 32 namespace

Use the 64bit numa variable names for numa32 as well.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: fixup numa 64 namespace

Using a variable name, which is the same as a macro name is not
really smart. Change the variable names and fixup all users.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: cleanup numa_64.c

Clean it up before applying more patches.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: merge include/asm-x86/sparsemem.h

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: merge include/asm-x86/sparsemem.h

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: put all kern_addr_valid() incarnations to pgtable.h

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: merge acpi_32/64.h

Merge the files.

[ mingo@elte.hu: build fix ]

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: cleanup acpi_32/64.h

Fix coding style to get a readable diff

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: cleanup smp.h variants

Bring the smp.h variants into sync to prepare merging and
paravirt support.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86: merge mpspec variants

The delta is now minimal. Merge them

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86: cleanup mpspec variants

Bring the mpspec variants into sync to prepare merging and
paravirt support.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86: merge tlbflush.h variants

The delta is now minimal. Merge them

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86: cleanup tlbflush.h variants

Bring the tlbflush.h variants into sync to prepare merging and
paravirt support.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86: merge spinlock.h variants

Merge them finally together

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: spinlock_32/64 substitute types and instructions

Use _slock_t for the spinlock data types and replace the instructions
by string defines, which makes the code of 32/64 bit versions more
or less identical.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: spinlock_32/64 match the jump labels and symbols

Match the jump labels in  the 32/64 variants and switch the
64bit version to symbols, so the functions are almost identical
except for the operand size now.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: use immediates instead of RW_LOCK_BIAS_STR

Use immediate instead of the RW_LOCK_BIAS_STR.
Makes the code more readable and gets rid of the string constant.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: fix asm constraints in spinlock_32/64.h

Use the correct constraints for the spinlock assembler functions.

read (modify) write functions need "+m" instead of "=m"

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: consolidate spinlock.h

The cli and sti instructions need to be replaced by paravirt hooks.
For the i386 architecture, this is already done. The code requirements
aren't much different from x86_64 POV, so this part is consolidated in
the common header

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86: irqflags consolidation

This patch consolidates the irqflags include files containing common
paravirt definitions. The native definition for interrupt handling, halt,
and such, are the same for 32 and 64 bit, and they are kept in irqflags.h.
the differences are split in the arch-specific files.

The syscall function, irq_enable_sysexit, has a very specific i386 naming,
and its name is then changed to a more general one.

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86: clean up nmi_32/64.c

clean up and make nmi_32/64.c more similar.
- white space and coding style clean up.
- nmi_cpu_busy is available on CONFIG_SMP.
- move functions __acpi_nmi_enable, acpi_nmi_enable,
  __acpi_nmi_disable and acpi_nmi_disable.
- make variables name more similar.

Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86: clean up stack allocation and free

Clean up the allocation and freeing of stacks a bit by using a __GFP_ZERO flag
instead of memset.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Mike Travis <travis@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86: bitops_32.h style cleanups

Coding style cleanups in x86/bitops_32.h:

- drop space in "* addr"
- whitespace & indentation fixes
- spello fixes

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86: remove extern declarations for code, data, bss resources

This patch removes the extern struct resource declarations for
data_resource, code_resource and bss_resource on x86 and declares that
three structures as static as done on other architectures like IA64.

On i386, these structures are moved to setup_32.c (from e820_32.c) because
that's code that is not specific to e820 and also required on EFI systems.
That makes the "extern" reference superfluous.

On x86_64, data_resource, code_resource and bss_resource are passed to
e820_reserve_resources() as arguments just as done on i386 and IA64.  That
also avoids the "extern" reference and it's possible to make it static.

Signed-off-by: Bernhard Walle <bwalle@suse.de>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86: remove dead code in ia32-emu

Remove useless second time checking of fsave argument in save_i387_ia32()
routine.  It's possible the compiler is doing the same but that is much
better to remove the dead code explicitly.

Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86: remove duplicate includes

Signed-off-by: Lucas Woods <woodzy@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86: mtrr use type bool [RESEND AGAIN]

This is a janitorish patch to 1) remove private TRUE/FALSE #def's in
favor of using the standard enum from linux/stddef.h and 2) switch the
variables holding those values to type 'bool' (from linux/types.h)
since it both seems more appropriate and allows for potentially better
optimization.

As a truly minor aside, I removed a couple of comments documenting
a 'do_safe' parameter that seems to no longer exist.

Signed-off-by: Paul Jimenez <pj@place.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86: pci-dma_64.c: cleanups

This patch contains the following cleanups:
- make the needlessly global iommu_setup() static
- remove the unused EXPORT_SYMBOL(iommu_merge)

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86: pci-calgary_64.c: make a variable static

"debugging" is a horrible name for a global variable - thankfully it can
become static.

Also put it out of __read_mostly so that gcc no longer has to emit it
at all.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86: nmi_64.c: make code static

This patch makes the following needlessly global code static:
- panic_on_timeout
- setup_nmi_watchdog()

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86 mce_64.c: make struct mcelog static

This patch makes the needlessly global struct mcelog static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: io_apic_64.c: remove unused config check

CONFIG_IRQBALANCE doesn't exist on x86_64.

Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86 e820_64.c: make 2 functions static

This patch makes the following needlessly global functions static:
- e820_print_map()
- early_panic()

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86: actually merge <asm/alternative.h>

This actually merges <asm-x86/alternative_{32,64}.h> into
<asm-x86/alternative.h>.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86: prepare merger of <asm/alternative_{32,64}.h>

Prepare for merging <asm/alternative_{32,64}.h> by making the 32- and
64-bit versions textually identical.  This involves:

- removing arbitrary header inclusion differences
- reorganizing the 32-bit version slightly to match the 64-bit version
- using <asm/asm.h> to unify the assembly code
- renaming struct paravirt_patch to struct paravirt_patch_site in the
  64-bit version to match the 32-bit version; there are no references
  to struct paravirt_patch elsewhere in the tree.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86: make i8259_64 more _32-like

Howdy! Here's a simple janitorish patch for you:

This patch mainly hinges around two includes and their ramifications:

#include <i8259.h> which provides cached_{slave,master}_mask
#include <io_ports.h> which provides PIC_{MASTER,SLAVE}_{IMR,CMD}

Adding these two includes and using those half dozen or so definitions
removed 140+ lines of diffs between i8259_32.c and i8259_64.c, thus
making it easier for the real substantitive differences between them to
show up, and hopefully therefore making it easier to eventually merge
the two.  All the warnings that checkpatch.pl throws (missing spaces
after commas and >80 character lines) exist intentionally to match
i8259_32.c.

Signed-off-by: Paul Jimenez <pj@place.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86: move 8259 defines to i8259.h

Move the i8259 defines and remove the now io_ports.h

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: unexport __{read,write}_lock_failed

This patch removes the unused exports for __{read,write}_lock_failed.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

x86: remove more bogus filenames in comments.

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: nuke a ton of unused exports

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: remove dead code and exports

No users.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: nuke a ton of dead hpet code

No users, just ballast

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: smp_64.c: remove unused exports and cleanup while at it

The exports are nowhere used. There is even no reason why they were
ever introduced.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: clean up arch/x86/kernel/time_64.c includes

Reduce the lets include all to the minimum.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: share rtc code

Remove the rtc code from time_64.c and add the extra bits to the
i386 path. The ACPI century check is probably valid for i386 as
well, but this is material for a separate patch.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: isolate the rtc code for sharing

The mach-default/mach_time.h code inline is moved to arch/x86/kernel/rtc.c
and the header files are adjusted.

Shrink the 3 dozen includes to the ones we really need.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: unify mc146818rtc.h - prepare for sharing rtc code

Unify mc146818rtc.h by adding the rtc_cmos_read/write functions to
time_64.c. This is a preparatory patch to finaly share the rtc code,
which is unsurprisingly similar.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: remove the duplicated arch/x86/ia32/mmap32.c

Use mmap_32.c in arch/x86/mm instead

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: clean up arch/x86/mm/mmap_32/64.c

White space and coding style clenaup.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: clean up arch/x86/kernel/vsmp_64.c

White space and coding style clenaup.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: clean up ioport_32.c

Remove unused variables, rename the "unused" argument to regp. It is used !
Codingstyle fixes.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: simplify set_bitmap in ioport_32.c

Simplify set_bitmap(). This is not in a hotpath and we really can use the
straight forward loop through those bits. A similar implementation is used
in the 64 bit code as well.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: merge include/asm-x86/scatterlist.h

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: merge include/asm-x86/dma.h

Almost identical.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: merge futex_32/64.h

Finally merge them together.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: prepare merging futex_32/64.h

Replace .quad/.long with a define and use the same asm syntax
for i386 and x86.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: prepare merging arch/x86/kernel/apic_32/64.c

Shuffle code around, so we get a readable diff.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>