git.openwrt.org Git - openwrt/staging/blogic.git/log

drm/i915: Don't clobber M/N values during fastset check

We're now calling intel_pipe_config_compare(..., true) uncoditionally
which means we're always going clobber the calculated M/N values with
the old values if the fuzzy M/N check passes. That causes problems
because the fuzzy check allows for a huge difference in the values.

I'm actually tempted to just make the M/N checks exact, but that might
prevent fastboot from kicking in when people want it. So for now let's
overwrite the computed values with the old values only if decide to skip
the modeset.

v2: Copy has_drrs along with M/N M2/N2 values

Cc: stable@vger.kernel.org
Cc: Blubberbub@protonmail.com
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Tested-by: Blubberbub@protonmail.com
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110782
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110675
Fixes: d19f958db23c ("drm/i915: Enable fastset for non-boot modesets.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190612172423.25231-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>

drm/i915: Use drm_gem_object.resv

Since commit 1ba627148ef5 ("drm: Add reservation_object to
drm_gem_object"), struct drm_gem_object grew its own builtin
reservation_object rendering our own private one bloat. Remove our
redundant reservation_object and point into obj->base.resv instead.

References: 1ba627148ef5 ("drm: Add reservation_object to drm_gem_object")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618125858.7295-1-chris@chris-wilson.co.uk

drm/i915: Keep engine alive as we retire the context

Though we pin the context first before taking the pm wakeref, during
retire we need to unpin before dropping the pm wakeref (breaking the
"natural" onion). During the unpin, we may need to attach a cleanup
operation on to the engine wakeref, ergo we want to keep the engine
awake until after the unpin.

v2: Push the engine wakeref into the barrier so we keep the onion unwind
ordering in the request itself

Fixes: ce476c80b8bf ("drm/i915: Keep contexts pinned until after the next kernel context switch")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618074153.16055-1-chris@chris-wilson.co.uk

drm/i915/guc: Reduce verbosity on log overflows

If the user is clearing the log buffer too slowly, we overflow. As this
is an expected condition, and the driver tries to handle it, reduce the
error message down to a notice.

Michal mentioned that another cause would be incorrect reset handling,
so we don't want to lose the notification entirely.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110817
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190617100917.13110-1-chris@chris-wilson.co.uk

Documentation/i915: fix file references after display/ subdir renames

Fix the plethora of Sphinx build errors after moving the display files
under a subdirectory.

Fixes: 379bc100232a ("drm/i915: move modesetting output/encoder code under display/")
Fixes: df0566a641f9 ("drm/i915: move modesetting core code under display/")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190617102944.25129-1-jani.nikula@intel.com

drm/i915/ehl: Introduce Mule Creek Canyon PCH

Although EHL introduces a new PCH, the South Display part of the PCH
that we care about is nearly identical to ICP, just with some pins
remapped. Most notably, Port C is mapped to the pins that ICP uses for
TC Port 1.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190615004210.16656-1-matthew.d.roper@intel.com

drm/i915/gtt: Serialise both updates to PDE and our shadow

Currently, we perform a locked update of the shadow entry when
allocating a page directory entry such that if two clients are
concurrently allocating neighbouring ranges we only insert one new entry
for the pair of them. However, we also need to serialise both clients
wrt to the actual entry in the HW table, or else we may allow one client
or even a third client to proceed ahead of the HW write. My handwave
before was that under the _pathological_ condition we would see the
scratch entry instead of the expected entry, causing a temporary
glitch. That starvation condition will eventually show up in practice, so
fix it.

The reason for the previous cheat was to avoid having to free the extra
allocation while under the spinlock. Now, we keep the extra entry
allocated until the end instead.

v2: Fix error paths for gen6

Fixes: 1d1b5490b91c ("drm/i915/gtt: Replace struct_mutex serialisation for allocation")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190617140426.7203-1-chris@chris-wilson.co.uk

drm/i915/dmc: protect against loading wrong firmware

In intel_package_header version 2 there's a new field in the
fw_info table that must be 0, otherwise it's not the correct DMC
firmware. Add a check for version 2 or later.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190607091230.1489-10-lucas.demarchi@intel.com

drm/i915/dmc: remove redundant return in parse_csr_fw()

parse_csr_fw() is responsible to set up several fields in struct intel_csr,
including the payload. We don't need to assign it again.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190607091230.1489-9-lucas.demarchi@intel.com

drm/i915/dmc: add support to load dmc_header version 3

Main difference is that now there are up to 20 MMIOs that can be set and
a lot of noise due to the struct changing the fields in the middle.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190607091230.1489-8-lucas.demarchi@intel.com

drm/i915/dmc: extract function to parse dmc_header

Complete the extraction of functions to parse specific parts of the
firmware. The return of the function parse_csr_fw() is now redundant
since it already sets the dmc_payload field. Changing it is left for
later to avoid noise in the commit.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190607091230.1489-7-lucas.demarchi@intel.com

drm/i915/dmc: extract function to parse package_header

Like parse_csr_fw_css() this parses the package_header from firmware and
saves the relevant fields in the csr struct. In this function we also
lookup the fw_info we are interested in.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190607091230.1489-6-lucas.demarchi@intel.com

drm/i915/dmc: extract function to parse css header

Let's start splitting the parse function, making all of them return the
number of bytes parsed - different versions of the firmware header may
require different sizes for the structures.

v2: rework remaining bytes calculation on new protection for amount of
bytes read

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190607091230.1489-5-lucas.demarchi@intel.com

drm/i915/dmc: add support for package_header with version 2

The only meaninful change is that it supports up to 32 fw_info entries
rather than the previous max=20.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190607091230.1489-4-lucas.demarchi@intel.com

drm/i915/dmc: extract fw_info and table walk from intel_package_header

Move fw_info out of struct intel_package_header to allow it to grow more
easily in future. To make a cleaner move, let's also extract a function to
search the header for the dmc_offset.

While reviewing this code I wondered why we continued the search even
after finding a suitable firmware. Add a comment to explain we will
continue to try to find a more specific firmware version, even if this
is not required by the spec.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190607091230.1489-3-lucas.demarchi@intel.com

drm/i915/dmc: use kernel types

Change all fields in intel_package_header and intel_dmc_header whose
meaning are 1-byte numbers to use u8.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190607091230.1489-2-lucas.demarchi@intel.com

drm/i915/gtt: Generalize alloc_pd

Allocate all page directory variants with alloc_pd. As
the lvl3 and lvl4 variants differ in manipulation, we
need to check for existence of backing phys page before accessing
it.

v2: use err in returns

Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614164350.30415-5-mika.kuoppala@linux.intel.com

drm/i915/gtt: Introduce init_pd

All page directories, excluding last level, are initialized with
pointer to next level page directories. Make common function for it.

Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614164350.30415-4-mika.kuoppala@linux.intel.com

drm/i915/gtt: Introduce init_pd_with_page

We set the page directory entries to point into a page table.
There is no gen specifics in here so make it simple and
obvious.

Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614164350.30415-3-mika.kuoppala@linux.intel.com

drm/i915/gtt: Use a common type for page directories

All page directories are identical in function, only the position in the
hierarchy differ. Use same base type for directory functionality.

v2: cleanup, size always 512, init to null

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614164350.30415-2-mika.kuoppala@linux.intel.com

drm/i915/gtt: No need to zero the table for page dirs

We set them to scratch right after allocation so prevent
useless zeroing before.

v2: atomic_t
v3: allow pdp alloc fail

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614164350.30415-1-mika.kuoppala@linux.intel.com

drm/i915: no need to check return value of debugfs_create functions

When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613145229.21389-1-jani.nikula@intel.com

drm/i915: move modesetting core code under display/

Now that we have a new subdirectory for display code, continue by moving
modesetting core code.

display/intel_frontbuffer.h sticks out like a sore thumb, otherwise this
is, again, a surprisingly clean operation.

v2:
- don't move intel_sideband.[ch] (Ville)
- use tabs for Makefile file lists and sort them

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613084416.6794-3-jani.nikula@intel.com

drm/i915/icl: Add Multi-segmented gamma support

ICL introduces a new gamma correction mode in display engine, called
multi-segmented-gamma mode. This mode allows users to program the
darker region of the gamma curve with sueprfine precision. An
example use case for this is HDR curves (like PQ ST-2084).

If we plot a gamma correction curve from value range between 0.0 to 1.0,
ICL's multi-segment has 3 different sections:
- superfine segment: 9 values, ranges between 0 - 1/(128 * 256)
- fine segment: 257 values, ranges between 0 - 1/(128)
- corase segment: 257 values, ranges between 0 - 1

This patch:
- Changes gamma LUTs size for ICL/GEN11 to 262144 entries (8 * 128 * 256),
  so that userspace can program with highest precision supported.
- Changes default gamma mode (non-legacy) to multi-segmented-gamma mode.
- Adds functions to program/detect multi-segment gamma.

V2: Addressed review comments from Ville
    - separate function for superfine and fine segments.
    - remove enum for segments.
    - reuse last entry of the LUT as gc_max value.
    - replace if() ....cond with switch...case in icl_load_luts.
    - add an entry variable, instead of 'word'

V3: Addressed review comments from Ville
    - extra newline
    - s/entry/color/
    - remove LUT size checks
    - program ilk_lut_12p4_ldw value before ilk_lut_12p4_udw
    - Change the comments in description of fine and coarse segments,
      and try to make more sense.
    - use 8 * 128 instead of 1024
    - add 1 entry in LUT for GCMAX

V4: Addressed review comments from Ville
    - Remove unused macro
    - missing shift entry in blue
    - pick correct entry for GCMAX
    - Added Ville's R-B
Note: Tested and confirmed the programming sequence of odd/even
registers in the HW. The correct sequence should be:
ilk_lut_12p4_udw
ilk_lut_12p4_ldw

v5: Addressed Ville's review comments and renamed odd/even register
helpers to be more consistent with the values.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1560321900-18318-5-git-send-email-uma.shankar@intel.com

drm/i915: Rename ivb_load_lut_10_max

This patch renames function ivb_load_lut_10_max to
ivb_load_lut_ext_max.

V3: Added Vill'es r-b.

Cc: Uma Shankar <uma.shankar@intel.com>
Suggested-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1560321900-18318-4-git-send-email-uma.shankar@intel.com

drm/i915/icl: Add register definitions for Multi Segmented gamma

Add macros to define multi segmented gamma registers

V2: Addressed Ville's comments:
     Add gen-lable before bit definition
    Addressed Jani's comment
- Use REG_GENMASK() and REG_BIT()
V3: Addressed Ville's comments:
    - Put comments at the end of line.
    - Change the comment at start of ICL multisegmented gamma registers.
    Added Ville's r-b

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1560321900-18318-3-git-send-email-uma.shankar@intel.com

drm/i915: Change gamma/degamma_lut_size data type to u32

Currently, data type of gamma_lut_size & degamma_lut_size elements
in intel_device_info is u16, which means it can accommodate maximum
64k values. In case of ICL multisegmented gamma, the size of gamma
LUT is 256K.

This patch changes the data type of both of these elements to u32.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
V4: Added Uma's r-b.

Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1560321900-18318-2-git-send-email-uma.shankar@intel.com

drm/i915: Nuke atomic set/get prop plane stubs

They have been unused since rotation was added to drm core in 2015,
time to get rid of them.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611132820.31981-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915: move modesetting output/encoder code under display/

Add a new subdirectory for display code, and start off by moving
modesetting output/encoder code. Judging by the include changes, this is
a surprisingly clean operation.

v2:
- move intel_sdvo_regs.h too
- use tabs for Makefile file lists and sort them

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613084416.6794-2-jani.nikula@intel.com

drm/i915: make intel_sdvo_regs.h self-contained

Ensure intel_sdvo_regs.h is self-contained and remains that way.

v2:
- include <linux/compiler.h> for __packed (Chris)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613100818.24800-1-jani.nikula@intel.com

drm/i915/ehl: Update MOCS table for EHL

EHL defines two new MOCS table entries but is otherwise compatible with
the ICL MOCS table.

These table entries (16 and 17) should still be considered unused for
ICL and as such their behavior remains undefined for that platform.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190530234014.22340-1-matthew.d.roper@intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915: Avoid tainting i915_gem_park() with wakeref.lock

While we need to flush the wakeref before parking, we do not need to
perform the i915_gem_park() itself underneath the wakeref lock, merely
the struct_mutex. If we rearrange the locks, we can avoid the unnecessary
tainting.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614220616.24932-1-chris@chris-wilson.co.uk

drm/i915: Replace engine->timeline with a plain list

To continue the onslaught of removing the assumption of a global
execution ordering, another casualty is the engine->timeline. Without an
actual timeline to track, it is overkill and we can replace it with a
much less grand plain list. We still need a list of requests inflight,
for the simple purpose of finding inflight requests (for retiring,
resetting, preemption etc).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614164606.15633-3-chris@chris-wilson.co.uk

drm/i915: Stop retiring along engine

We no longer track the execution order along the engine and so no longer
need to enforce ordering of retire along the engine.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614164606.15633-2-chris@chris-wilson.co.uk

drm/i915: Keep contexts pinned until after the next kernel context switch

We need to keep the context image pinned in memory until after the GPU
has finished writing into it. Since it continues to write as we signal
the final breadcrumb, we need to keep it pinned until the request after
it is complete. Currently we know the order in which requests execute on
each engine, and so to remove that presumption we need to identify a
request/context-switch we know must occur after our completion. Any
request queued after the signal must imply a context switch, for
simplicity we use a fresh request from the kernel context.

The sequence of operations for keeping the context pinned until saved is:

- On context activation, we preallocate a node for each physical engine
   the context may operate on. This is to avoid allocations during
   unpinning, which may be from inside FS_RECLAIM context (aka the
   shrinker)

- On context deactivation on retirement of the last active request (which
   is before we know the context has been saved), we add the
   preallocated node onto a barrier list on each engine

- On engine idling, we emit a switch to kernel context. When this
   switch completes, we know that all previous contexts must have been
   saved, and so on retiring this request we can finally unpin all the
   contexts that were marked as deactivated prior to the switch.

We can enhance this in future by flushing all the idle contexts on a
regular heartbeat pulse of a switch to kernel context, which will also
be used to check for hung engines.

v2: intel_context_active_acquire/_release

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614164606.15633-1-chris@chris-wilson.co.uk

drm/i915: make intel_wakeref work on the rpm struct

intel_runtime_pm is the only thing they use from the i915 structure,
so use that directly.

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613232156.34940-9-daniele.ceraolospurio@intel.com

drm/i915: update with_intel_runtime_pm to use the rpm structure

Matching the underlying get/put functions.

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613232156.34940-8-daniele.ceraolospurio@intel.com

drm/i915: update rpm_get/put to use the rpm structure

The functions where internally already only using the structure, so we
need to just flip the interface.

v2: rebase

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613232156.34940-7-daniele.ceraolospurio@intel.com

drm/i915: move a few more functions to accept the rpm structure

Focusing on the functions called in few places.

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613232156.34940-6-daniele.ceraolospurio@intel.com

drm/i915: move and rename i915_runtime_pm

Asserts aside, all the code working on this structure is in
intel_runtime_pm.c and uses the intel_ prefix, so move the
structure to intel_runtime_pm.h and adopt the same prefix.

Since all the asserts are now working on the runtime_pm structure,
bring them across as well.

v2: drop unneeded include (Chris), don't rename debugfs, rebase

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613232156.34940-5-daniele.ceraolospurio@intel.com

drm/i915: make enable/disable rpm assert function use the rpm structure

With this all the rpm assert-related functions consistently work on
the i915_runtime_pm structure

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613232156.34940-4-daniele.ceraolospurio@intel.com

drm/i915: Remove rpm asserts that use i915

Quite a few of the call points have already switched to the version
working directly on the runtime_pm structure, so let's switch over the
rest and kill the i915-based asserts.

v2: rebase

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613232156.34940-3-daniele.ceraolospurio@intel.com

drm/i915: prefer i915_runtime_pm in intel_runtime function

As a first step towards updating the code to work on the runtime_pm
structure instead of i915, rework all the internals to use and pass
around that.

v2: add comment for kdev (Jani), move rpm init after pdev init for
mock_device

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613232156.34940-2-daniele.ceraolospurio@intel.com

drm/i915: Add Wa_1409120013:icl,ehl

This chicken bit should be set before enabling FBC to avoid screen
corruption when the plane size has odd vertical and horizontal
dimensions.  It is safe to leave the bit set even when FBC is disabled.

v2:
- The bspec's name for this bit on these platforms ("Spare 14") is
   pretty meaningless.  Let's rename the bit definition to something
   that more accurately reflects what the bit really does.  (Clint)

v3:
- The chicken register was already defined (along with a few other
   gen9-specific bits) farther down.  Just add the new bit definition
   there.  (Clint)

Cc: Clinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190612183631.30540-1-matthew.d.roper@intel.com
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>

drm/i915: Refine i915_reset.lock_map

We already use a mutex to serialise i915_reset() and wedging, so all we
need it to link that into i915_request_wait() and we have our lock cycle
detection.

v2.5: Take error mutex for selftests

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614071023.17929-3-chris@chris-wilson.co.uk

drm/i915: Execute signal callbacks from no-op i915_request_wait

If we enter i915_request_wait() with an already completed request, but
unsignaled dma-fence, signal the fence before returning. This allows us
to execute any of the signal callbacks at the earliest opportunity.

v2: Also signal after busyspin success

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614111053.25615-2-chris@chris-wilson.co.uk

drm/i915: Discard some redundant cache domain flushes

Since commit a679f58d0510 ("drm/i915: Flush pages on acquisition"), we
flush objects on acquire their pages and as such when we create an
object for the purpose of writing into it, we do not need to manually
flush.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614111053.25615-1-chris@chris-wilson.co.uk

drm/i915: Enable refcount debugging for default debug levels

refcount_t is our first line of defence against use-after-free, so let's
enable it for debugging.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613122842.4840-1-chris@chris-wilson.co.uk

drm/i915: Move fence register tracking from i915->mm to ggtt

As the fence registers only apply to regions inside the GGTT is makes
more sense that we track these as part of the i915_ggtt and not the
general mm. In the next patch, we will then pull the register locking
underneath the i915_ggtt.mutex.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613073254.24048-1-chris@chris-wilson.co.uk

drm/i915: kerneldoc warnings squelched

drivers/gpu/drm/i915//gem/i915_gem_shrinker.c:142: warning: Function parameter or member 'shrink' not described in 'i915_gem_shrink'
drivers/gpu/drm/i915//gem/i915_gem_shrinker.c:142: warning: Excess function parameter 'flags' description in 'i915_gem_shrink'

drivers/gpu/drm/i915//intel_display.c:13443: warning: Function parameter or member '_state' not described in 'intel_atomic_check'
drivers/gpu/drm/i915//intel_display.c:13443: warning: Excess function parameter 'state' description in 'intel_atomic_check'

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190612151311.30295-1-chris@chris-wilson.co.uk

drm/i915: Remove I915_READ16 and I915_WRITE16

Remove call sites in favour of uncore mmio accessors and remove the old
macros.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611104548.30545-6-tvrtko.ursulin@linux.intel.com

drm/i915: Remove I915_READ_NOTRACE

Only a few call sites remain which have been converted to uncore mmio
accessors and so the macro can be removed.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611104548.30545-5-tvrtko.ursulin@linux.intel.com

drm/i915: Remove I915_WRITE_NOTRACE

Only a few call sites remain which have been converted to uncore mmio
accessors and so the macro can be removed.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611104548.30545-4-tvrtko.ursulin@linux.intel.com

drm/i915: Remove POSTING_READ16

Only a few call sites remain which have been converted to uncore mmio
accessors and so the macro can be removed.

ENGINE_POSTING_READ16 is added to replace one engine->mmio_base relative
call site.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611104548.30545-3-tvrtko.ursulin@linux.intel.com

drm/i915: Remove I915_POSTING_READ_FW

Only a few call sites remain which have been converted to uncore mmio
accessors and so the macro can be removed.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611104548.30545-2-tvrtko.ursulin@linux.intel.com

drm/i915: Remove I915_READ8

Only a few call sites remain which have been converted to uncore mmio
accessors and so the macro can be removed.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611104548.30545-1-tvrtko.ursulin@linux.intel.com

drm/i915: Combine unbound/bound list tracking for objects

With async binding, we don't want to manage a bound/unbound list as we
may end up running before we even acquire the pages. All that is
required is keeping track of shrinkable objects, so reduce it to the
minimum list.

Fixes: 6951e5893b48 ("drm/i915: Move GEM object domain management from struct_mutex to local")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190612105720.30310-1-chris@chris-wilson.co.uk

drm/i915: Kill INTEL_SUBPLATFORM_AML

All AML parts are either KBL ULX or CFL ULX so there is no point
in keeping INTEL_SUBPLATFORM_AML around. As these are the only
CFL ULX parts (normal CFL didn't have Y SKUs) so we'll just
replace IS_AML_ULX with IS_CFL_ULX (it was already paired with
IS_KBL_ULX which accounts for the other half of the AML parts).

Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190605162946.19223-2-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Add missing commas to the end of the subplatform ID arrays

Add a comma after the final entry to make diffs less obnoxious if
we have to add further entries past the last one.

Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190605162946.19223-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> #irc

drm/i915: Improve WRPLL reference clock readout on HSW/BDW

On non-ULT HSW the "special" WRPLL reference clock select
actually means non-SSC. Take that into account when reading
out the WRPLL state.

Also the non-SSC reference may be either 24MHz or 135MHz,
which we can read out from FUSE_STRAP3. The BDW docs actually
say: "also indicates whether the CPU and PCH are in a single
package or separate packages", so it may be that this is not
actually required and we could just assume 135 MHz (just like
the code already did). But it doesn't really hurt to read this
out as the HSW docs aren't quite so clear.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190604200933.29417-5-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Assert that HSW/BDW LCPLL is using the non-SSC reference

Only the non-SSC reference is truly supported for the LCPLL. Assert
that it is indeed selected.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190604200933.29417-4-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Nuke LC_FREQ

Get rid of the pointless LC_FREQ define.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190604200933.29417-3-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Rename HSW/BDW PLL bits

Give the PLL control register bits better names on HSW/BDW.

v2: Fix the copy paste fails in SPLL_REF defines (Maarten)

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610133609.27288-1-ville.syrjala@linux.intel.com
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #irc

drm/i915: Do not touch the PCH SSC reference if a PLL is using it

Our PCH refclk init code currently assumes that the PCH SSC reference
can only be used for FDI. That is not true and it can be used by
SPLL/WRPLL for eDP SSC or clock bending as well. Before we go
reconfiguring it let's make sure no PLL is currently using the PCH
SSC reference.

For some reason the hw is not particularly upset about losing
the clock if we immediately follow up with a modeset. Can't
really explain why nothing times out during the crtc disable
at least, but that's what the logs say. With fastboot the
story is quite different and we lose the entire display if
we turn off the PCH SSC reference when it's still being used.

Since we totally skip configuring the PCH SSC reference it
may not be in the proper state for FDI. Hopefully that won't
be a problem in practice.

We really should move this code to be part of the modeset seqeuence
and properly deal with the potentially conflicting requirements
imposed on PLL reference clocks. But that requires actual work.
Let's toss in a TODO for that.

v2: Pimp the commit message with the fastboot vs. not
details

Cc: Julius B. <freedesktop@blln.gr>
Cc: Johannes Krampf <johannes.krampf@gmail.com>
Tested-by: Johannes Krampf <johannes.krampf@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108773
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190604200933.29417-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Prevent lock-cycles between GPU waits and GPU resets

We cannot allow ourselves to wait on the GPU while holding any lock as we
may need to reset the GPU. While there is not an explicit lock between
the two operations, lockdep cannot detect the dependency. So let's tell
lockdep about the wait/reset dependency with an explicit lockmap.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190612085246.16374-1-chris@chris-wilson.co.uk

drm/i915: Add a label for config DRM_I915_SPIN_REQUEST

If we don't give it a label, it does not appear as a configuration
option.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190612093111.11684-9-chris@chris-wilson.co.uk

drm/i915/skl: use ranges for voltage level lookup

Like was done for ICL, let's convert the voltage level lookup to use
frequency ranges rather than individual frequencies. For deciding the
voltage, the individual value doesn't really matter.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610214847.9865-1-lucas.demarchi@intel.com

drm/i915/cnl: use ranges for voltage level lookup

Like was done for ICL, let's convert the voltage level lookup to use
frequency ranges rather than individual frequencies. For deciding the
voltage, the individual value doesn't really matter.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610214834.9789-1-lucas.demarchi@intel.com

drm/i915/icl: use ranges for voltage level lookup

Spec shows voltage level 0 as 307.2, 312, or lower and suggests to use
range checks. Prepare for having other frequencies in these ranges by
not comparing the exact frequency.

v2: invert checks by comparing biggest cdclk first (suggested by Ville)

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610214819.9703-1-lucas.demarchi@intel.com

drm/i915: Make GuC GGTT reservation work on ggtt

These functions operate on ggtt so make them take that directly as
parameter.

At the same time move the USES_GUC conditional down to
intel_guc_reserve_ggtt_top for symmetry with
intel_guc_reserved_gtt_size.

v2:
* Rename and move functions to be static in i915_gem_gtt.c (Michal)

v3:
* Add comment explaining reason for reservation, add assert and fix
error message. (Michal)

v4:
* Fix checkpatch error.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611122350.15060-1-tvrtko.ursulin@linux.intel.com

drm/i915/guc: Move intel_guc_reserved_gtt_size to intel_wopcm_guc_size

Reduces pointer chasing and gets more to the point.

v2:
* Tidy whitespace.
* Tidy comment. (Michal)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611110044.7742-1-tvrtko.ursulin@linux.intel.com

drm/i915: Rename i915_hw_ppgtt to i915_ppgtt

Keeping the _hw_ in there does not help to distinguish it from its
only brethren i915_ggtt, so drop it.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611091238.15808-2-chris@chris-wilson.co.uk

drm/i915: Pull kref into i915_address_space

Make the kref common to both derived structs (i915_ggtt and i915_ppgtt)
so that we can safely reference count an abstract ctx->vm address space.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611091238.15808-1-chris@chris-wilson.co.uk

drm/i915: Promote i915->mm.obj_lock to be irqsafe

The intent is to be able to update the mm.lists from inside an irqsoff
section (e.g. from a softirq rcu workqueue), ergo we need to make the
i915->mm.obj_lock irqsafe.

v2: can_discard_pages() ensures we are shrinkable
v3: Beware shadowing of 'flags'

Fixes: 3b4fa9640ccd ("drm/i915: Track the purgeable objects on a separate eviction list")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110869
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610145430.17717-1-chris@chris-wilson.co.uk

drm/i915: Allow interrupts when taking the timeline->mutex

Before we commit ourselves to writing commands into the
ringbuffer and submitting the request, allow signals to interrupt
acquisition of the timeline mutex. We allow ourselves to be interrupted
at any time later if we need to block for space in the ring, anyway.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610103610.19883-1-chris@chris-wilson.co.uk

drm/i915: Make read_subslice_reg take engine

The function operates on the render engine so make the input reflect it.

v2:
* Pass engine to read_subslice_reg. (Chris)
* Drop inline from read_subslice_reg.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610125706.26110-1-tvrtko.ursulin@linux.intel.com

drm/i915: Remove I915_READ64 and I915_READ64_32x2

Now that all their users are gone we can remove the macros and
accompanying duplicated comment.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610120608.15477-6-tvrtko.ursulin@linux.intel.com

drm/i915: Convert intel_read_wm_latency to uncore mmio accessors

More implicit dev_priv removal.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610120608.15477-5-tvrtko.ursulin@linux.intel.com

drm/i915: Convert gem_record_fences to uncore mmio accessors

More implicit dev_priv removal.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610120608.15477-4-tvrtko.ursulin@linux.intel.com

drm/i915: Convert icl_get_stolen_reserved to uncore mmio accessors

More removal of implicit dev_priv.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610120608.15477-3-tvrtko.ursulin@linux.intel.com

drm/i915: Convert i915_reg_read_ioctl to use explicit mmio accessors

No excuse for code located in intel_uncore.c to not use intel_uncore_
helpers.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610120608.15477-2-tvrtko.ursulin@linux.intel.com

drm/i915: Eliminate unused mmio accessors

On the path of removing mmio accessors with implicit dev_priv, easy first
step is to remove all such unused macros.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610120608.15477-1-tvrtko.ursulin@linux.intel.com

drm/i915/perf: fix whitelist on Gen10+

Gen10 added an additional NOA_WRITE register (high bits) and we forgot
to whitelist it for userspace.

Fixes: 95690a02fb5d96 ("drm/i915/perf: enable perf support on CNL")
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190601225845.12600-1-lionel.g.landwerlin@intel.com

drm/i915: Move i915_check_and_clear_faults to intel_reset.c

The code is logically about reset so it makes sense.

It also enables making i915_clear_error_registers static.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190607115932.20271-1-tvrtko.ursulin@linux.intel.com

drm/i915: Grammar s/the its/its/

Fix the grammar.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190607113118.14645-1-geert+renesas@glider.be

drm/i915/frontbuffer: remove obsolete comment about mark busy/idle

This no longer exists.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190606122203.13416-4-jani.nikula@intel.com

drm/i915: move more atomic plane declarations to intel_atomic_plane.h

Some function declarations in intel_drv.h were missed when
intel_atomic_plane.h was created.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190606122203.13416-3-jani.nikula@intel.com

drm/i915: remove some unused declarations from intel_drv.h

intel_mark_busy(), intel_mark_idle(), and skl_cdclk_get_vco() no longer
exist.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190606122203.13416-2-jani.nikula@intel.com

drm/i915: move pm related declarations to intel_pm.h

Move more missed declarations from i915_drv.h to intel_pm.h.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190606122203.13416-1-jani.nikula@intel.com

drm/i915/wopcm: update default size for gen11+

The size has been increased to 2MB starting from Gen11. GuC and HuC FWs
fit in 1MB so we were fine even with the legacy define, but let's still
move to the correct one before the blobs grow to avoid being caught off
guard in the future.

v2: return early if the platform doesn't have GuC, fix nits (Michal)

Bspec: 12690
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
[ickle: use SZ consistently]
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190606224225.14287-2-daniele.ceraolospurio@intel.com

drm/i915/guc: always use Command Transport Buffers

Now that we've moved the Gen9 GuC blobs to version 32 we have CTB
support on all gens, so no need to restrict the usage to Gen11+.
Note that MMIO communication is still required for CTB initialization.

v2: fix commit message nits (Michal)

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190606224225.14287-1-daniele.ceraolospurio@intel.com

drm/i915/dsi: Read back pclk set by GOP and use that as pclk (v3)

The GOP sometimes initializes the pclk at a (slightly) different frequency
then the pclk which we've calculated.

This commit makes the DSI code read-back the pclk set by the GOP and
if that is within a reasonable margin of the calculated pclk, uses
that instead.

This fixes the first modeset being a full modeset instead of a
fast modeset on systems where the GOP pclk is different.

Changes in v2:
-Use intel_encoder_current_mode() to get the pclk setup by the GOP

Changes in v3:
-Back to the readback approach, skipping the dsi_pll.ctrl / .dev checks
in intel_pipe_config_compare() when adjust is set leads to:
[drm:pipe_config_err [i915]] *ERROR* mismatch in dsi_pll.ctrl (...)
[drm:pipe_config_err [i915]] *ERROR* mismatch in dsi_pll.div (...)
-Do the readback and pclk overriding from vlv_dsi_init(), rather then from
intel_dsi_vbt_init() as the vbt code should not be touching the hw

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190605181735.7020-3-hdegoede@redhat.com

drm/i915/dsi: Move vlv/icl_dphy_param_init call out of intel_dsi_vbt_init (v2)

The vlv/icl_dphy_param_init calls do various calculations to set dphy
parameters based on the pclk.

Move the calling of vlv/icl_dphy_param_init to vlv_dsi_init to give
vlv_dsi_init a chance to tweak the pclk before these calculations are done.

Changes in v2:
-Also moves the icl and vlv specific dphy_param_init functions from the
generic intel_dsi_vbt.c file into the icl_ and vlv_dsi.c specific files.

Note icl_dphy_param_init() and vlv_dphy_param_init() are only moved,
otherwise they are completely unchanged.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190605181735.7020-2-hdegoede@redhat.com

drm/i915/dsi: Move logging of DSI VBT parameters to a helper function

This is a preparation patch for moving the calling of *_dphy_param_init()
out of intel_dsi_vbt_init.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190605181735.7020-1-hdegoede@redhat.com

drm/i915/sdvo: Actually print the reason why the SDVO command failed

It's much easier to figure out why the SDVO encoder refuses to cooperate
if we can see what status we got back.

v2: Zero initialize only the first character, not the whole buffer

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20190410170941.28142-1-ville.syrjala@linux.intel.com

drm/i915/sdvo: Don't write stack garbage into the hbuf

Pass the length returned by hdmi_infoframe_pack_only() to
intel_sdvo_write_infoframe() so that we don't end up writing
stack garbage into the hbuf.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190409144054.24561-7-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/sdvo: Don't unpack stack garbage

Pass the length returned by intel_sdvo_read_infoframe() to
hdmi_infoframe_unpack() so that we don't try to unpack any
leftover stack garbage.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190409144054.24561-6-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/sdvo: Check that we have space for the infoframe

Before we go writing the infoframe let's make sure we have
the space for it. Not that it really matters since the write
loop would just terminate early in that case.

v2: Check after the debug print and ++ (Chris)

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190410170835.18867-1-ville.syrjala@linux.intel.com
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>