Luka Perkov [Fri, 6 Mar 2015 14:41:57 +0000 (14:41 +0000)]
ar71xx: add support for compex wpj558
OpenWrt can be flashed with following uboot commands:
tftpboot 0x80500000 openwrt-ar71xx-generic-wpj558-16M-squashfs-sysupgrade.bin
erase 0x9f030000 +$filesize
cp.b $fileaddr 0x9f030000 $filesize
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 44620
Steven Barth [Fri, 6 Mar 2015 14:41:07 +0000 (14:41 +0000)]
odhcpd: improvements for DHCPv4 and compile fixes
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 44619
John Crispin [Fri, 6 Mar 2015 07:57:10 +0000 (07:57 +0000)]
openssl: enable ARM assembly acceleration
Tested myself on ixp4xx and mvebu, and (originally)
by Daniel on i.MX6. Also tested on a MIPS target,
to make sure the change to ASFLAGS does not break things.
Based on a patch submitted by Daniel Drown:
https://lists.openwrt.org/pipermail/openwrt-devel/2014-July/026639.html
Signed-off-by: Claudio Leite <leitec@staticky.com>
Signed-off-by: Daniel Drown <dan-openwrt@drown.org>
SVN-Revision: 44618
John Crispin [Fri, 6 Mar 2015 07:57:03 +0000 (07:57 +0000)]
swconfig: fix build with linux 4.0
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 44617
John Crispin [Fri, 6 Mar 2015 07:56:58 +0000 (07:56 +0000)]
ipq806x: rename patches in patches-3.18
This will allow ipq806x to support multiple kernel version more easily.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 44616
John Crispin [Fri, 6 Mar 2015 07:56:47 +0000 (07:56 +0000)]
kernel: move KERNFS to generic config
KERNFS symbol is selected by SYSFS, so place it in generic config.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44615
John Crispin [Fri, 6 Mar 2015 07:56:34 +0000 (07:56 +0000)]
kernel: disable ARCH_NEEDS_CPU_IDLE_COUPLED
Disable ARCH_NEEDS_CPU_IDLE_COUPLED by-default in generic config, since
only one platfrom (omap) needs them.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44614
John Crispin [Fri, 6 Mar 2015 07:56:21 +0000 (07:56 +0000)]
kernel: disbale HAMRADIO in generic config
HAMRADIO enabled in all generic configs, but no one platform directly
use related drivers/protocols. This symbol is only used for kmod-ax25
package modules. Furthermore, half of platforms explicitly disables
this symbol, what silently disables build of modules for kmod-ax25
package.
So disable HAMRADIO by-default in generic config, add it to kmod-ax25
package and remove it from platform specific configs.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44613
John Crispin [Fri, 6 Mar 2015 07:56:08 +0000 (07:56 +0000)]
kernel: move MTD_SPLIT_SUPPORT to generic config
CONFIG_MTD_SPLIT_SUPPORT symbol default value is 'y' and many platform
specific configs explicitly enables it, while no one platform disables
this symbol. So place it in generic config and remove from platform
specific configs.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44612
John Crispin [Fri, 6 Mar 2015 07:55:57 +0000 (07:55 +0000)]
kernel: remove GENERIC_NET_UTILS from platform configs
CONFIG_GENERIC_NET_UTILS is selected by CONFIG_NET and already enabled
in generic config, so we don't need this symbol in platform specific
configurations.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44611
Luka Perkov [Thu, 5 Mar 2015 23:43:27 +0000 (23:43 +0000)]
kirkwood: drop support for 3.14
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 44610
Luka Perkov [Thu, 5 Mar 2015 23:43:24 +0000 (23:43 +0000)]
kirkwood: switch to 3.18
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 44609
Luka Perkov [Thu, 5 Mar 2015 23:43:21 +0000 (23:43 +0000)]
generic: add CONFIG_FW_LOADER_USER_HELPER symbol
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 44608
John Crispin [Thu, 5 Mar 2015 20:25:18 +0000 (20:25 +0000)]
lantiq: fix netdev setup in ltq-ptm-vdsl
The initial fix for 3.18 in r44346 wrongly treated the newly added
parameter of alloc_netdev to be another function pointer, causing
ether_config to be skipped during ptm netdev init.
Fix this by partially reverting r44346 and properly setting the newly
added macro parameter.
(Tested on VRX200 board)
A similar change might be needed for ltq-ptm-adsl as well.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 44607
John Crispin [Thu, 5 Mar 2015 20:25:11 +0000 (20:25 +0000)]
kernel: add ip_vti tunnel module
IP VTI (Virtual Tunnel Interface) is used to create a virtual device
for IPsec VPN (similar to OpenVPN).
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
SVN-Revision: 44606
John Crispin [Thu, 5 Mar 2015 20:25:02 +0000 (20:25 +0000)]
mtd: fix md5sum error checking
In mtd_verify(), the return value of md5sum() has been
interpreted as error if nonzero, while the function
returns number of processed bytes, which caused
mtd_verify() to always fail.
This patch fixes error checking to interpret only
negative values as errors.
Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com>
SVN-Revision: 44605
John Crispin [Thu, 5 Mar 2015 20:24:57 +0000 (20:24 +0000)]
at91: add SAMA5D3-Xplained board UBI parameters to makefile.
Signed-off-by: Songjun Wu <songjun.wu@atmel.com>
SVN-Revision: 44604
John Crispin [Thu, 5 Mar 2015 20:24:50 +0000 (20:24 +0000)]
ath5k: fix reset race
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44603
John Crispin [Thu, 5 Mar 2015 20:24:45 +0000 (20:24 +0000)]
ath5k: channel change fix
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44602
John Crispin [Thu, 5 Mar 2015 20:24:39 +0000 (20:24 +0000)]
brcm2708: add another missing symbol
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 44601
John Crispin [Thu, 5 Mar 2015 20:24:33 +0000 (20:24 +0000)]
generic: add USB_DWC2 missing symbols
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 44600
John Crispin [Thu, 5 Mar 2015 20:24:28 +0000 (20:24 +0000)]
generic: add missing symbols for 4.0
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 44599
John Crispin [Thu, 5 Mar 2015 20:24:22 +0000 (20:24 +0000)]
netfilter: fix nf_nat_redirect dependencies for 3.19 and 4.0
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 44598
Rafał Miłecki [Wed, 4 Mar 2015 07:08:39 +0000 (07:08 +0000)]
kernel: backport bcma changes to 3.19 and 4.0
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44597
Rafał Miłecki [Tue, 3 Mar 2015 23:15:55 +0000 (23:15 +0000)]
bcm53xx: switch to IRQ buttons (keys)
Now bcma provides IRQ domain we don't have to poll anymore.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44596
Rafał Miłecki [Tue, 3 Mar 2015 23:15:49 +0000 (23:15 +0000)]
kernel/mac80211: backport bcma changes from 4.1
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44595
Jonas Gorski [Tue, 3 Mar 2015 14:39:52 +0000 (14:39 +0000)]
generic: upgrade to 3.14.34
Fixes several issues in the network stack.
Full changelog:
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.14.33
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.14.34
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44594
Jonas Gorski [Tue, 3 Mar 2015 14:39:49 +0000 (14:39 +0000)]
generic: upgrade to 3.18.8
Fixes several issues in the network stack.
Full changelog:
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.8
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44593
Felix Fietkau [Mon, 2 Mar 2015 20:33:02 +0000 (20:33 +0000)]
kernel: revert a broken chunk in the mips module reloc patch fix
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44592
Felix Fietkau [Mon, 2 Mar 2015 04:42:17 +0000 (04:42 +0000)]
kernel: fix the mips module relocation patch for 3.19+
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44590
Michael Büsch [Sun, 1 Mar 2015 20:44:33 +0000 (20:44 +0000)]
Fix download URL of the 4.x kernel.
SVN-Revision: 44589
Rafał Miłecki [Sun, 1 Mar 2015 16:24:15 +0000 (16:24 +0000)]
adm5120: switch kernel to 3.18
Tested by Jonas on WP54g, thank you!
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44588
Rafał Miłecki [Sun, 1 Mar 2015 16:24:11 +0000 (16:24 +0000)]
adm5120: enable low_mem
Most devices have only 16 MiB of RAM, this will allow them to boot
without OOM.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44587
Lars-Peter Clausen [Sun, 1 Mar 2015 15:56:43 +0000 (15:56 +0000)]
xburst: Remove n516, n526 and id800wt subtargets
The driver code for supporting these subtargets was already removed a while ago,
so
the current images wont actually boot.
It is also quite unlikely that there are any users of them at this point, so
remove them.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
SVN-Revision: 44586
Jo-Philipp Wich [Sun, 1 Mar 2015 12:25:02 +0000 (12:25 +0000)]
lldpd: fix passing multiple ifnames to the daemon
Instead of multiple -I arguments, lldpd expects a comma separated list.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44585
Jonas Gorski [Sun, 1 Mar 2015 11:37:18 +0000 (11:37 +0000)]
brcm47xx, brcm63xx: disable CONFIG_MIPS_O32_FP64_SUPPORT
The flag is experimental and requires toolchain support, which we don't
provide. Also neither target has an FPU so it becomes meaningless
without the FPU emulator enabled.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44584
Jonas Gorski [Sun, 1 Mar 2015 11:37:15 +0000 (11:37 +0000)]
kernel: move CONFIG_MIPS_O32_FP64_SUPPORT to generic configs
Most MIPS targets have it disabled, so move the symbol to the generic
configs to keep target configs small.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44583
Jonas Gorski [Sun, 1 Mar 2015 11:37:06 +0000 (11:37 +0000)]
brcm63xx: prefer gpio-button-hotplug over button-hotplug
Saves us pulling in the input system, shaving off a few kb from image
sizes.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44582
Rafał Miłecki [Sun, 1 Mar 2015 00:01:33 +0000 (00:01 +0000)]
adm5120: use subtarget configs for all kernels
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44581
Rafał Miłecki [Sat, 28 Feb 2015 23:39:14 +0000 (23:39 +0000)]
adm5120: add 3.18 support
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44580
Rafał Miłecki [Sat, 28 Feb 2015 22:46:42 +0000 (22:46 +0000)]
ep93xx: add 3.18 support
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44579
Rafał Miłecki [Sat, 28 Feb 2015 20:53:55 +0000 (20:53 +0000)]
mpc52xx: add 3.18 config
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44578
Jonas Gorski [Sat, 28 Feb 2015 19:59:50 +0000 (19:59 +0000)]
brcm63xx: fix DTS LEDs and buttons
- A4001N/A4001N1: fix swapped green and red LEDs
- CVG834G: add missing LED
- RTA1320: reorder LEDs by GPIO#
- V2500V: add missing LEDs and buttons
- WAP-5813n: fix WPS button (GPIO 35)
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44577
Jonas Gorski [Sat, 28 Feb 2015 19:59:46 +0000 (19:59 +0000)]
brcm63xx: fix ethernet breakage in 3.18
Linux commit
d75b1ade567ffab ("net: less interrupt masking in NAPI")
chose the samantics of the napi poll return value, which caused napi to
not resume interrups/polling anymore.
Fix the return value to restore expected behaviour.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44576
Jonas Gorski [Sat, 28 Feb 2015 19:59:34 +0000 (19:59 +0000)]
brcm63xx: fix BCM63268 interrupt register locations for legacy probe
Legacy probe passed the IRQSTAT registers instead of the IRQMASK
registers causing all register accesses to be offset by 16 bytes.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44575
Jonas Gorski [Sat, 28 Feb 2015 19:59:26 +0000 (19:59 +0000)]
brcm63xx: fix gpio register usage
The driver expected data then dir, but both dts and legacy code passed
dir then data. Fix this by making the driver expect the registers in
ascending order, i.e. dir then data.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44574
Rafał Miłecki [Sat, 28 Feb 2015 18:15:59 +0000 (18:15 +0000)]
mpc83xx: start work on 3.18 support
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44573
Rafał Miłecki [Sat, 28 Feb 2015 14:56:53 +0000 (14:56 +0000)]
omap: complete 3.18 support
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44572
Rafał Miłecki [Sat, 28 Feb 2015 13:54:51 +0000 (13:54 +0000)]
omap: start working on 3.18 support
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44571
Jonas Gorski [Fri, 27 Feb 2015 23:48:48 +0000 (23:48 +0000)]
brcm63xx: backport and enable DT spi-gpio no CS support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 44570
Jonas Gorski [Fri, 27 Feb 2015 23:48:32 +0000 (23:48 +0000)]
brcm63xx: fix image generation and broken patch
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 44569
Jonas Gorski [Fri, 27 Feb 2015 17:40:17 +0000 (17:40 +0000)]
b53: fix mmap register read/writes > 32 bit
For bcm63xx integrated switches, broadcom changed the data endianess
to match the system endianess. But this only applies to within one word,
which causes 48/64 bit values to be still split into their "litte endian"
groups.
E.g. 48 bit values (with 5 being the most significant byte) aligned
0x00 ..01 or 0123
0x04 2345 45..
will become
0x00 ..10 resp. 3210
0x04 5432 54..
Likewise for 64 bit values.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44568
Jonas Gorski [Fri, 27 Feb 2015 17:40:09 +0000 (17:40 +0000)]
brcm63xx: remove gpio base workaround
Now that all gpio users without named gpios use DT, we do not need
to fix the gpio controller bases anymore.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44567
Jonas Gorski [Fri, 27 Feb 2015 17:40:04 +0000 (17:40 +0000)]
brcm63xx: move buttons and leds to dts files
Register buttons and leds through DT for all available dts,
and remove them from the board files.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: remove leds/buttons from board files
fix wrong led polarities for dsl-274xb-c2, cpva642, p870hw
comment out spi-gpio and associated leds]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44566
Jonas Gorski [Fri, 27 Feb 2015 17:39:49 +0000 (17:39 +0000)]
brcm63xx: probe gpio controllers through DT
Add a generic mmio gpio controller based driver and probe it
through device tree.
Use aliases for base calculation until we converted all users to
device tree or named gpios.
Convert bcm63xx_enet's ephy-reset gpio to use a named gpio.
While at it, remove the duplicate reset gpio defintion for livebox.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44565
Jonas Gorski [Fri, 27 Feb 2015 17:39:29 +0000 (17:39 +0000)]
brcm63xx: convert BTV2500V to dts
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44564
Jonas Gorski [Fri, 27 Feb 2015 17:39:21 +0000 (17:39 +0000)]
brcm63xx: convert RTA1320 to dts
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44563
Jonas Gorski [Fri, 27 Feb 2015 17:39:13 +0000 (17:39 +0000)]
brcm63xx: convert RTA1025 to dts
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44562
Jonas Gorski [Fri, 27 Feb 2015 17:39:07 +0000 (17:39 +0000)]
brcm63xx: use dtb for cvg834g
Add a dtsi for bcm3368, add a dts and profile for cvg834g, and convert
it to use ImageDTB. Since HCS requires more arguments, enhance the max
arguments of the call.
The image name is intentionally left blank to prevent non-initramfs
images to be built, as they currently contain no rootfs and consequently
won't work.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44561
Jonas Gorski [Fri, 27 Feb 2015 17:38:51 +0000 (17:38 +0000)]
brcm63xx: image: move image argument to front in *DTB calls
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44560
Jonas Gorski [Fri, 27 Feb 2015 17:38:46 +0000 (17:38 +0000)]
brcm63xx: add dts and profile for Livebox
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44559
Jonas Gorski [Fri, 27 Feb 2015 17:38:28 +0000 (17:38 +0000)]
brcm63xx: allow lzma to use 32MB RAM
Most 16 MiB RAM devices don't even load elf kernels, so it's safe to
assume we have at least 32 MB RAM. This fixes tftp booting with the
default package set as this already produces an uncompressed
kernel > 8 MiB.
New limit is 8 MiB compressed / 24 MiB compressed.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44558
Jonas Gorski [Fri, 27 Feb 2015 17:38:25 +0000 (17:38 +0000)]
package: mtd: move bcm963xx_tag definition into source code
Remove the need for the header file to be exported - we don't need most
of it anyway; all we care about are the offset of the rootfs length and
header crc fields.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44557
Jonas Gorski [Fri, 27 Feb 2015 17:38:14 +0000 (17:38 +0000)]
brcm63xx: do not align squashfs rootfs start
We do not need to align the start of read only rootfs's to erase blocks.
This allows us to write the squashfs rootfs directly behind the kernel,
potentially freeing up one erase block.
We still need to align for jffs2, so add a flag for imagetag to
optionally align the rootfs start.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44556
Jonas Gorski [Fri, 27 Feb 2015 17:38:09 +0000 (17:38 +0000)]
brcm63xx: drop call to prepare_generic_squashfs
We do not use the result, so no need to call it.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44555
Jonas Gorski [Fri, 27 Feb 2015 17:38:05 +0000 (17:38 +0000)]
firmware-utils: imagetag: use cyg_crc32 instead of duplicating code
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44554
Felix Fietkau [Fri, 27 Feb 2015 07:35:26 +0000 (07:35 +0000)]
kernel: fix 3.18+ if_bridge.h header conflict with musl
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44553
Felix Fietkau [Fri, 27 Feb 2015 07:34:47 +0000 (07:34 +0000)]
procd: update to the latest version, fixes musl compile error
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44552
Felix Fietkau [Fri, 27 Feb 2015 07:34:24 +0000 (07:34 +0000)]
build: move tmp/.prereq-build to staging_dir/host to gracefully handle staging_dir deletion
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44551
Jo-Philipp Wich [Thu, 26 Feb 2015 21:23:55 +0000 (21:23 +0000)]
ubox: fix segmentation fault in insmod
Fix segfault in kmodloader insmod mode due to uninitialized module
directory list.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44549
Jo-Philipp Wich [Thu, 26 Feb 2015 13:44:05 +0000 (13:44 +0000)]
uhttpd: relay stderr to syslog
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44548
Jo-Philipp Wich [Thu, 26 Feb 2015 13:42:47 +0000 (13:42 +0000)]
procd: add support for relaying daemon stdio to syslog
Procd enabled init scripts can now specify:
procd_set_param stdout 1
procd_set_param stderr 1
... to relay their respective standard IO streams to the system log.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44547
Jo-Philipp Wich [Thu, 26 Feb 2015 13:42:44 +0000 (13:42 +0000)]
libubox: implement ulog_close() and call it on ulog_open()
This is required to properly update syslog idents when switching between
log modes.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44546
Jo-Philipp Wich [Thu, 26 Feb 2015 10:25:29 +0000 (10:25 +0000)]
fstools: switch to ulog api
Update to git head in order to switch the block, mount_root etc. logging to
the common ulog() api for putting early boot messages into dmesg.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44545
Jo-Philipp Wich [Thu, 26 Feb 2015 10:25:24 +0000 (10:25 +0000)]
ubox: switch to ulog api
Update to git head in order to switch the kmodloader logging to the common
ulog() api for putting early boot messages into dmesg.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44544
Jo-Philipp Wich [Thu, 26 Feb 2015 10:25:21 +0000 (10:25 +0000)]
procd: switch to ulog api
Update to git head in order to switch the procd logging to the common ulog()
api for putting early boot messages into dmesg.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44543
Jo-Philipp Wich [Thu, 26 Feb 2015 10:25:18 +0000 (10:25 +0000)]
libubox: introduce generic logging api
Update to git head in order to introduce the new ulog() logging api which
supports early boot logging to dmesg.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44542
Steven Barth [Thu, 26 Feb 2015 07:42:12 +0000 (07:42 +0000)]
6rd: honor tunlink in host dependency
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 44541
Steven Barth [Thu, 26 Feb 2015 07:14:41 +0000 (07:14 +0000)]
firewall: fix some more null-pointer accesses
thanks to Hans Dedecker
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 44540
Jo-Philipp Wich [Wed, 25 Feb 2015 18:54:13 +0000 (18:54 +0000)]
fstools: fix build with enabled ubifs extroot support
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44538
Jo-Philipp Wich [Wed, 25 Feb 2015 13:03:16 +0000 (13:03 +0000)]
fstools: fix multiple extroot problems
- Support external overlays on non-MTD systems again
- Account for new directory structure of overlayfs partitions (additional upper/ component)
- Support executing block from either overlay or rom
- Support loading fstab from either overlay or rom
- Log extroot failures to dmesg
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44535
John Crispin [Wed, 25 Feb 2015 12:01:19 +0000 (12:01 +0000)]
modules: make ahci-platform depend on TARGET_ipq806x
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44534
Jo-Philipp Wich [Wed, 25 Feb 2015 11:48:27 +0000 (11:48 +0000)]
ubox: kmodloader: support loading kmods from multiple directories
This is required during early boot in the extroot setup phase to support
loading kmods from the overlay that depend on kmods on the rom partition.
The subsequent mount_root updates will use the LD_LIBRARY_PATH env
variable to pass kmod directories to kmodloader.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44533
Imre Kaloz [Tue, 24 Feb 2015 18:53:14 +0000 (18:53 +0000)]
generic/4.0: refresh patches
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 44532
Imre Kaloz [Tue, 24 Feb 2015 18:35:17 +0000 (18:35 +0000)]
generic/4.0: drop patches applied upstream
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 44531
Imre Kaloz [Tue, 24 Feb 2015 18:30:16 +0000 (18:30 +0000)]
generic/4.0: drop 3.18 specifix dwc2 backport
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 44530
Imre Kaloz [Tue, 24 Feb 2015 18:27:49 +0000 (18:27 +0000)]
generic/4.0: the ubi patches has been fixed in the 3.19 patchset already
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 44529
John Crispin [Tue, 24 Feb 2015 12:01:08 +0000 (12:01 +0000)]
ar71xx: refresh patches
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44528
John Crispin [Tue, 24 Feb 2015 12:01:00 +0000 (12:01 +0000)]
ar71xx: Add QCA953X version2 SoC support
http://patchwork.ozlabs.org/patch/435234/
Signed-off-by: 郭传鈜 <gch981213@gmail.com>
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44527
John Crispin [Tue, 24 Feb 2015 12:00:50 +0000 (12:00 +0000)]
ar71xx: TL-WA7210n v2 support
This patch adds support for TP-Link TL-WA7210n[0]
[0] http://www.tplink.com/en/products/details/?model=TL-WA7210N
Signed-off-by: Hendrik Frenzel <hfrenzel@scunc.net>
SVN-Revision: 44526
John Crispin [Tue, 24 Feb 2015 12:00:22 +0000 (12:00 +0000)]
ipq806x: add ahci to default packages
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44525
John Crispin [Tue, 24 Feb 2015 12:00:16 +0000 (12:00 +0000)]
modules: add ahci-platform
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44524
John Crispin [Tue, 24 Feb 2015 12:00:09 +0000 (12:00 +0000)]
ipq806x: add default package selection
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44523
John Crispin [Tue, 24 Feb 2015 12:00:04 +0000 (12:00 +0000)]
ipq806x: initialize the network on AP148
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 44522
John Crispin [Tue, 24 Feb 2015 11:59:56 +0000 (11:59 +0000)]
kernel: add qca-nss-gmac as a new module
This driver is used on IPQ806x to instanciate & drive the ethernet
interfaces.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 44521
John Crispin [Tue, 24 Feb 2015 11:59:51 +0000 (11:59 +0000)]
ipq806x: enable GMAC support in DTS
This adds the GMAC entries in the ipq806x dtsi file as well as in the
ap148 specific dts file.
This also adds the MDIO change as well.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 44520
John Crispin [Tue, 24 Feb 2015 11:59:47 +0000 (11:59 +0000)]
ipq806x: enable ar8xxx switch family support
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 44519
John Crispin [Tue, 24 Feb 2015 11:59:41 +0000 (11:59 +0000)]
ipq806x: fix spi read issues observed with SMP enabled
This change is fixing the issues observed when booting from NOR flash
with SMP enabled.
Error logs below:
building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of
xref (0 dead, 0 orphan) found.
m25p80 spi32766.0: SPI transfer failed: -110
spi_master spi32766: failed to transfer one message from queue
jffs2: Write of 873 bytes at 0x019001e8 failed. returned 0, retlen 792
Patch is cherry-picked from here:
https://www.codeaurora.org/cgit/quic/qsdk/oss/kernel/linux-msm/commit/drivers/spi/spi-qup.c?h=coconut_20140924&id=
4faba89e3ffbb1c5f6232651375b9b3212b50f02
More details in the patch file.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 44518
John Crispin [Tue, 24 Feb 2015 11:59:35 +0000 (11:59 +0000)]
mpc85xx: add 3.19 support
It took very little to make the TL-WDR4900 work under 3.19:
- config is the same as for 3.18
- only patch 210 had to be refreshed, the other patches are
the same as for 3.18
- in /etc/config/wireless the path options need to be prefixed
with "platform/" ('platform/
ffe09000.pci/...')
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 44517
Felix Fietkau [Tue, 24 Feb 2015 07:21:25 +0000 (07:21 +0000)]
samba36: update to 3.6.25, fixes remote code execution bug (CVE-2015-0240)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44515
projects / openwrt / staging / zorun.git / log