openwrt/staging/jow.git
6 years agoipq40xx: fix NBG6617 LED mapping
David Bauer [Sun, 4 Nov 2018 15:01:39 +0000 (16:01 +0100)]
ipq40xx: fix NBG6617 LED mapping

The NBG6617's LEDs are wrongly identified in the 01_leds boardinit
script (board instead of boardname), resulting in referencing
non-existent LEDs in UCI.

Signed-off-by: David Bauer <mail@david-bauer.net>
(backported from 5896b146a49968aa0a9889f57f75a8a918e384ae)

6 years agoiperf: allow non-ipv6 builds
Alexander Couzens [Sat, 3 Nov 2018 00:22:59 +0000 (01:22 +0100)]
iperf: allow non-ipv6 builds

Add configure argument --disable-ipv6 when ipv6 is deselected.
Add fix-non-ipv6-builds.patch as long there is no new upstream
release.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
(backported from 900005ee75754ba62972ed8da6eba2d6b47e1b7f)
(rebased patches)
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
6 years agocurl: noop commit to refer CVEs fixed in 7.62.0
Hans Dedecker [Fri, 2 Nov 2018 12:05:13 +0000 (13:05 +0100)]
curl: noop commit to refer CVEs fixed in 7.62.0

When bumping Curl to 7.62.0 in commit 278e4eba09 I did not include the fixed
CVEs in the commit message; this commit fixes this.

The following CVEs were fixed in 7.62.0 :

CVE-2018-16839
CVE-2018-16840
CVE-2018-16842

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
(backported from c9f5934c71e73df707d97f8b2ff86e164bfbda12)

6 years agoipq-wifi: drop custom board-2.bins
Christian Lamparter [Mon, 22 Oct 2018 21:47:56 +0000 (23:47 +0200)]
ipq-wifi: drop custom board-2.bins

The BDFs for all boards were upstreamed to the ath10k-firmware
repository and linux-firmware.git.

We switched to the upstream board-2.bin, hence the files can be removed
here.

Keep the ipq-wifi package in case new boards are added. It might take
some time till board-2.bins send upstream are merged.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
(backported from dceee8cc09a54f96dee82a6e95e3e77a6dd7ac13)

6 years agoipq40xx: nbg6617: switch to upstream boardfile variant
Christian Lamparter [Mon, 22 Oct 2018 21:47:55 +0000 (23:47 +0200)]
ipq40xx: nbg6617: switch to upstream boardfile variant

The NBG6617's boardfile was merged and this device can
now switch to the upstream ath10k board-2.bin.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
(backported from 8b18fce3b800f4fec5b9fe3b324514071fae73eb)

6 years agoath10k-firmware: update board-2.bin for community firmwares
Christian Lamparter [Mon, 22 Oct 2018 21:47:54 +0000 (23:47 +0200)]
ath10k-firmware: update board-2.bin for community firmwares

This patch updates the board-2.bin for the default
IPQ4019, QCA9984 and QCA9888 ath10k-firmware-xyz-ct
and -ct-htt firmwares.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
(backported from 575d0240f9593145aeda60385110e3e1e1673888)

6 years agoipq40xx: rt-ac58u: replace ubi auto load hack
Christian Lamparter [Mon, 22 Oct 2018 21:47:53 +0000 (23:47 +0200)]
ipq40xx: rt-ac58u: replace ubi auto load hack

This patch replaces the custom autoload quirk of the
RT-AC58U with a bootargs-append overwrite.

The vendor's u-boot doesn't leave the bootargs / cmdline alone,
so the it can't be overwritten in any other way right now...
And of course, this will be a lot of fun to deal with once
the device switches to the new spi-nand subsystem.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
(backported from 6840f15a16607a2c08241ae3f8932b5c0431486b)

6 years agokernel: Remove dependencies on old kernels
Rosen Penev [Sun, 28 Oct 2018 01:53:52 +0000 (18:53 -0700)]
kernel: Remove dependencies on old kernels

Kernels 4.1 and 4.4 are not part of the tree anymore.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
(backported from 8fc187a76ea00f89c26a489e5242bde4887fe529)

6 years agolibconfig: Fix tarball filename (and URL)
Daniel Engberg [Fri, 19 Oct 2018 21:05:44 +0000 (23:05 +0200)]
libconfig: Fix tarball filename (and URL)

v$(PKG_VERSION).tar.gz is a bad idea and will clash for obvious reasons.

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
(backported from f9a408b75e72d9ddbe4ddf9e54bad2b4b604235a)

6 years agouboot-mxs: bump to v2018.09
Michael Heimpold [Sun, 28 Oct 2018 14:26:08 +0000 (15:26 +0100)]
uboot-mxs: bump to v2018.09

Also update the U-Boot BSP patch for I2SE Duckbill devices
and remove upstreamed patch for LibreSSL support.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
(backported from 79b766d07d56d22536120de2066e2e203ed01eb0)

6 years agokernel: add kmod-usb-serial-mos7840
Thomas Fuzeau [Tue, 30 Oct 2018 11:06:22 +0000 (12:06 +0100)]
kernel: add kmod-usb-serial-mos7840

Enable build of kernel module for mos7840 usb-serial devices.

Signed-off-by: Thomas Fuzeau <tfuzeau@loocla.com>
(backported from 87e1894d59bf2272e93ae26692eefc9826997709)

6 years agocurl: bump to 7.62.0
Hans Dedecker [Wed, 31 Oct 2018 21:58:54 +0000 (22:58 +0100)]
curl: bump to 7.62.0

Refresh patches, for changes in version 7.62.0 see https://curl.haxx.se/changes.html#7_62_0

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
(backported from 278e4eba096238991d0d5965d5fab07a9b648796)
(rebased patches)
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
6 years agoopenssl: enable OPENSSL_WITH_DEPRECATED when OpenSSL is built as a build dep
Matthias Schiffer [Tue, 30 Oct 2018 19:38:34 +0000 (20:38 +0100)]
openssl: enable OPENSSL_WITH_DEPRECATED when OpenSSL is built as a build dep

Some package (e.g. libunbound) depend on OPENSSL_WITH_DEPRECATED. In some
situations it may happen that libunbound and openssl are only pulled in as
build dependencies, but are not enabled in .config.

In such cases, the defaults of symbols like OPENSSL_WITH_DEPRECATED are
ignored (as the whole symbol depends on PACKAGE_libopenssl), and config
symbol dependencies of libunbound aren't effective either (as libunbound
is not actually enabled).

This commit works around the issue by introducing a hidden negated symbol
OPENSSL_NO_DEPRECATED, which is always disabled when PACKAGE_libopenssl is
disabled, and ensures that OpenSSL is built with deprecated APIs in this
case. A user can still manage to break the build by explicitly enabling
libopenssl and disabling OPENSSL_WITH_DEPRECATED; the interaction between
build dependencies and config symbols will require further discussion.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
(backported from dd9da5146299b769fad874d32a8ae110312cb68f)

6 years agodnsmasq: tighten config file permissions
Kevin Darbyshire-Bryant [Thu, 11 Oct 2018 08:46:42 +0000 (09:46 +0100)]
dnsmasq: tighten config file permissions

Install following as config files (600) perms instead of as data (644)

/usr/share/dnsmasq/dhcpbogushostname.conf
/usr/share/dnsmasq/trust-anchors.conf
/usr/share/dnsmasq/rfc6761.conf
/etc/hotplug.d/ntp/25-dnsmasqsec
/etc/config/dhcp
/etc/dnsmasq.conf

dnsmasq reads relevant config files before dropping root privilege and
running as dnsmasq:dnsmasq

ntpd runs as root so the hotplug script is still accessible

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
(backported from 3dba85254719215747e150301081477a47b38645)

6 years agoar71xx: expand kernel size for ubnt targets
Koen Vandeputte [Mon, 29 Oct 2018 14:48:10 +0000 (15:48 +0100)]
ar71xx: expand kernel size for ubnt targets

Kernel 4.14 is pretty large causing a build error as the partition is too small.
Expand the kernel partition a bit to make it fit.

* ubnt-uap-pro
* ubnt-unifi-outdoor-plus

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
(backported from 162e016fed96eeea410e305b7edaf7008cf6ab77)

6 years agoar71xx: disable ap91-5g due to kernel size
Koen Vandeputte [Mon, 29 Oct 2018 14:44:54 +0000 (15:44 +0100)]
ar71xx: disable ap91-5g due to kernel size

This target causes a build failure as the kernel image does not fit
into the kernel partition.

As the kernel is located behind the rootfs, it cannot be enlarged
as the boot entry location would get altered.

Disable this target for now.

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
(backported from d6b63f16984b91b489713c772c49fb9982cdf68e)

6 years agoar71xx: fix sysupgrade generation for some targets
Koen Vandeputte [Wed, 24 Oct 2018 12:44:30 +0000 (14:44 +0200)]
ar71xx: fix sysupgrade generation for some targets

These targets are already defined as having a dynamic partition
but the safeloader was not adapted for them.

This causes a build warning for the sysupgrade image being too big.

Targets:
- c58-v1
- c60-v1
- c60-v2
- TL-WR1043 v5
- TL-WR902AC v1
- TL-WR942N V1

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
(backported from f3b80c36bb01fa7cf4181828d78da8a66f46c31d)

6 years agoar71xx: move OCEDO Koala to generic and use dynamic partitioning
David Bauer [Thu, 18 Oct 2018 18:43:42 +0000 (20:43 +0200)]
ar71xx: move OCEDO Koala to generic and use dynamic partitioning

This changes the OCEDO Koala flash-layout to a unified firmware
partition, thus making the ar71xx-generic kernel fit in flash.

Compile and runtested on OCEDO Koala.

Signed-off-by: David Bauer <mail@david-bauer.net>
[small title reword]
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
(backported from f89fc43a50998a69bd401268020ab78b90ff7a34)

6 years agogrub2: fix regression caused by binutils-2.31.1
Philip Prindeville [Sun, 21 Oct 2018 02:23:12 +0000 (20:23 -0600)]
grub2: fix regression caused by binutils-2.31.1

grub-efi no longer works:

grub-mkimage: error: relocation 0x4 is not implemented yet.

See:

http://git.savannah.gnu.org/cgit/grub.git/commit/util?id=842c390469e2c2e10b5aa36700324cd3bde25875

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>i [PKG_RELEASE increase]
(backported from a6d02a757273439133eef70a658c49059c18018a)
(rebased patches)
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
6 years agoglibc: update to latest 2.27 commit (BZ #23562, BZ #23275)
Hans Dedecker [Tue, 23 Oct 2018 13:55:09 +0000 (15:55 +0200)]
glibc: update to latest 2.27 commit (BZ #23562, BZ #23275)

77b4b8231e signal: Use correct type for si_band in siginfo_t [BZ #23562]
5bdb6897fc Fix race in pthread_mutex_lock while promoting to PTHREAD_MUTEX_ELISION_NP [BZ #23275]

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
(backported from 70315fe144035c3f741108df2ebdcd8912b2d576)

6 years agofstools: update to git HEAD
Hans Dedecker [Sun, 21 Oct 2018 18:43:46 +0000 (20:43 +0200)]
fstools: update to git HEAD

29e53af fstools: add ntfs support

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
(backported from 59db98d0f216b2de1472bcde0d87ae871625052c)

6 years agomac80211: hermes-pcmcia: add missing dependency to kmod-pcmcia-core
Hauke Mehrtens [Sun, 21 Oct 2018 14:35:49 +0000 (16:35 +0200)]
mac80211: hermes-pcmcia: add missing dependency to kmod-pcmcia-core

This fixes a build problem on x86.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(backported from 9fcfcd49f8b9c63758e1fd2d9a6ee20ef74b84d5)

6 years agolinux-firmware: intel: Add iwl 9000 and 9260 firmware
Hauke Mehrtens [Thu, 18 Oct 2018 19:03:16 +0000 (21:03 +0200)]
linux-firmware: intel: Add iwl 9000 and 9260 firmware

Add the most recent supported firmware file for the Intel 9000 and
9260 wireless chips. The API version 41 is not yet supported by the driver.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(backported from e1db49310e9912f4076789e704180ab3b9ea0184)

6 years agolinux-firmware: intel: update firmware files for 7265D, 8000C and 8265
Hauke Mehrtens [Thu, 18 Oct 2018 19:02:20 +0000 (21:02 +0200)]
linux-firmware: intel: update firmware files for 7265D, 8000C and 8265

Use more recent versions for the Intel wireless chips 7265D, 8000C and 8265.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(backported from 10dffe2fa34d300583da23843995b4126d0a59a5)

6 years agompc85xx: workaround 4.14 cross compile issue
Ryan Mounce [Fri, 12 Oct 2018 07:46:28 +0000 (18:16 +1030)]
mpc85xx: workaround 4.14 cross compile issue

Regression introduced with 4.10 by 43c9127d94d62a232ed33ed2eab8a08657ce5472

Build will fail if system 'ar' does not support deterministic builds.
e.g. macOS with Xcode toolchain

Appears to be fixed upstream in 4.18 by af3901cbbd3de182aafb8ee553c825c0074df6a2

Signed-off-by: Ryan Mounce <ryan@mounce.com.au>
(backported from 4d2613b01ac6d34c2de550472ad9167e28ebd11e)

6 years agotools/pkg-config: pass arguments at the end
Arthur Skowronek [Mon, 15 Oct 2018 12:55:57 +0000 (14:55 +0200)]
tools/pkg-config: pass arguments at the end

Go for openwrt passes pkg-config arguments in the format of

        pkg-config --cflags -- pkg-name

which in turn will be passed down to the real pkg-config as something
like

        pkg-config.real --cflags -- pkg-name --define...

and causes the real pkg-config implementation to missinterpret the given
argument list.

This also helps to fix https://github.com/golang/go/issues/27940

Signed-off-by: Arthur Skowronek <arthur.skowronek@tuta.io>
(backported from 5f2cb6d7dc9de24bec7b1139f8d785f0e7588eed)

6 years agokernel/modules: Aosong AM2315/AM2320 IIO kernel module support enabled.
Roman Bazalevskiy [Fri, 12 Oct 2018 12:16:42 +0000 (15:16 +0300)]
kernel/modules: Aosong AM2315/AM2320 IIO kernel module support enabled.

Signed-off-by: Roman Bazalevskiy <rvb@rvb.name>
(backported from 47e7a3904df6e0556fa9cd29206e9b8228e4d943)

6 years agokernel/modules: add kmod-fou6 package
Deng Qingfang [Tue, 16 Oct 2018 15:01:05 +0000 (23:01 +0800)]
kernel/modules: add kmod-fou6 package

IPv6 support for Foo-over-UDP tunnel

Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
(backported from 858a8acf3ec786348f6d347cf9e7afcf4888fee1)

6 years agolinux-firmware: Update linux-firmware to 2018-10-18
Robert Marko [Fri, 19 Oct 2018 07:54:32 +0000 (09:54 +0200)]
linux-firmware: Update linux-firmware to 2018-10-18

Kalles ath10k PR was finally merged so update linux-firmware to
include those changes.

This is needed since disabling ath10k-firmware a lot of custom BDF-s
in board-2.bin-s are not available in previously outdated linux-firmware
board-2.bin-s.
This also includes support for boards currently using ipq-wifi and other
WIP ones.

Runtime tested on 8devices Jalapeno.

Signed-off-by: Robert Marko <robimarko@gmail.com>
(backported from f6a26f9a202474cf853b43191d119a1f6e65a5b7)

6 years agoapm821xx: add disk-activity triggers via DT.
Christian Lamparter [Mon, 15 Oct 2018 18:00:09 +0000 (20:00 +0200)]
apm821xx: add disk-activity triggers via DT.

The WNDR4700 and the MBL have a dedicated HDD activity LED.
This patch adds the default led triggers to the DTS and
removes the entries in 01_leds.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
(backported from fc70276e6cd330eddaafbc71f11acefbc84a25df)

6 years agoapm821xx: apm82181.dtsi overhaul
Christian Lamparter [Mon, 15 Oct 2018 18:00:08 +0000 (20:00 +0200)]
apm821xx: apm82181.dtsi overhaul

- order entries by mmio address where possible

 - switch to lower-case address values

 - comment on BSP u-boot behaviour in regards to
   what it edits and look for

 - annotate irq lines with the help of interrupt-names

 - remove deprecated "device_type" properties
   The pci and network device_type had to stay since
   they are required by the drivers and u-boot.
   the cpu and memory device_types will remain as well
   as they are still part of the DT Spec.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
(backported from 1d5d77612f0eb3aa435dc574aecd23b629b55b6d)

6 years agoapm821xx: force WNDR4700 console to 115200n8
Christian Lamparter [Mon, 15 Oct 2018 18:00:07 +0000 (20:00 +0200)]
apm821xx: force WNDR4700 console to 115200n8

With the upcoming 4.19 release, the serial console on the
Netgear WNDR4700 would no longer work as it is never really
set and always relied on the kernel's serial code not to
change the baud rate.

On the stock firmware, Netgear forced the console setting
through a custom CONFIG_CMDLINE in their kernel to 115200.
Normally, they should have done it in a different way and
just passed the baudrate through a "console=..." kernel
parameter via the bootargs in the "/chosen" dt node.
But in their default u-boot bootcmd setting, they somehow
forgot to add the "run addtty", so there's no easy way to
pass the baudrate from u-boot to the kernel. So it has
to be forced as otherwise it ends up as 9600 baud.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
(backported from 9ca82c2374e008f288c90066a7f2c2581c584c7e)

6 years agoapm821xx: set uart compatible to ns16750
Christian Lamparter [Mon, 15 Oct 2018 18:00:06 +0000 (20:00 +0200)]
apm821xx: set uart compatible to ns16750

The APM821XX/PPC460EX datasheet mentions:
"Register compatibility with 16750 register set"

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
(backported from 68bb91018df1c3d9474041a4d55e1cfd66022522)

6 years agogemini: Fix up image generation
Linus Walleij [Wed, 17 Oct 2018 18:46:19 +0000 (20:46 +0200)]
gemini: Fix up image generation

I noticed that the image generator for the Gemini generates
some 10+ MB files for the second (application) partition.
This is just wrong. The first 6144K partition named initramfs
easily fits OpenWRTs squashfs,jffs2 overlayed partitions
with nice headroom for storing configuration files.

Generate a blank partition for the hddapp.tgz file and delete
it after generating the firmware image - when performing
updates manually you just want the "rd.z" file around
anyways.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
(backported from f280bd7fa8423c04028757bbf28284574c7a5bc9)

6 years agogemini: Break out USB to packages
Linus Walleij [Thu, 18 Oct 2018 09:30:27 +0000 (11:30 +0200)]
gemini: Break out USB to packages

This creates a new kernel package for the fotg210 host
controller and uses that with the gemini to shrink the
kernel. The SQ201 needs the USB2 PCI package as well.

The build system required me to make kernel_oldconfig
beofore it would build without errors so some minor
unrelated Kconfig entries are changed.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
(backported from 10ec966f7ba7471a8af437c317cdcc5ef8865e8d)

6 years agotoolchain/musl: Don't override optimization set by upstream
Daniel Engberg [Thu, 22 Feb 2018 22:39:40 +0000 (23:39 +0100)]
toolchain/musl: Don't override optimization set by upstream

Don't override optimization set by upstream.
Provides a speed increase for internal (library), malloc and string
operations in musl.

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
[add : to PKG_RELEASE release variable for consistency]
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
(backported from d27d87c9109e12485bc3a709c8dea1ce05f9f81c)

6 years agoiproute2: install ip-tiny and ip-full in /usr/libexec
Hans Dedecker [Tue, 16 Oct 2018 12:16:48 +0000 (14:16 +0200)]
iproute2: install ip-tiny and ip-full in /usr/libexec

Install the ip-tiny and ip-full variants in /usr/libexec as the suffixed
ip variants are not meant to be called directly

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
(backported from 15a59e3e088c693cf7a654c31151149268b9a340)

6 years agoar71xx/ath79: fix mtd corruption
Fabio Bettoni [Wed, 17 Oct 2018 12:21:41 +0000 (14:21 +0200)]
ar71xx/ath79: fix mtd corruption

In commit fec8fe806963 ("kernel: bump 4.9 to 4.9.116") [1], the following patch for removed:
- 403-mtd_fix_cfi_cmdset_0002_status_check.patch

This patch contained fixes for both write and erase functions.

While the chip-detects for erase got fixed upstream [2],
some modifications are still required, even with the fixes applied.

While at it, also apply the same fix for target ath79,
which suffers the same issue.

Not doing so results in following errors seen:

Collected errors:
 * pkg_write_filelist: Failed to open //usr/lib/opkg/info/luci-lib-ip.list: I/O error.
 * opkg_install_pkg: Failed to extract data files for luci-lib-ip. Package debris may remain!
 * opkg_install_cmd: Cannot install package luci-ssl.
 * opkg_conf_write_status_files: Can't open status file //usr/lib/opkg/status: I/O error.

[    0.780920] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    8.406396] jffs2: notice: (415) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[    8.423476] mount_root: switching to jffs2 overlay
[  270.902671] jffs2: Write of 1989 bytes at 0x005ce6f8 failed. returned -5, retlen 962
[  270.931965] jffs2: Write of 1989 bytes at 0x005ceec0 failed. returned -5, retlen 0
[  270.939631] jffs2: Not marking the space at 0x005ceec0 as dirty because the flash driver returned retlen zero
[  270.950397] jffs2: Write of 68 bytes at 0x005ceec0 failed. returned -5, retlen 0
[  270.957838] jffs2: Not marking the space at 0x005ceec0 as dirty because the flash driver returned retlen zero
[  270.968584] jffs2: Write of 68 bytes at 0x005ceec0 failed. returned -5, retlen 0
[  270.976027] jffs2: Not marking the space at 0x005ceec0 as dirty because the flash driver returned retlen zero
[  270.986735] jffs2: Write of 68 bytes at 0x005ceec0 failed. returned -5, retlen 0
[  270.994225] jffs2: Not marking the space at 0x005ceec0 as dirty because the flash driver returned retlen zero

[1] https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=fec8fe806963c96a6506c2aebc3572d3a11f285f
[2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v4.9.133&id=a0239d83e1cb60de5e78452d4708c083b9e3dcbe

Fixes: fec8fe806963 ("kernel: bump 4.9 to 4.9.116")
Signed-off-by: Fabio Bettoni <fbettoni@gmail.com>
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
(backported from ddc11c3932c7b7b7df7d5fbd48f207e77619eaa7)
(rebased patches)
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
6 years agoar71xx: Move some targets to tiny
Koen Vandeputte [Wed, 17 Oct 2018 15:16:51 +0000 (17:16 +0200)]
ar71xx: Move some targets to tiny

Recent changes on ar71xx (switch to 4.14, memory compaction, ...) cause
an increase in kernel size, making it too big for some devices.

Move these devices to the tiny target, where kernel symbols and
optimization for speed are disabled, reducing the kernel size.

Devices:
- EnGenius ENS202EXT
- OCEDO Koala

Compile-tested targets:

- ar71xx->generic->default
- ar71xx->smallFlash->Default

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
(backported from 5f249333090741ecba190855b13c87fd93ca2520)

6 years agotreewide: use wpad-basic for not small flash targets
Mathias Kresin [Tue, 10 Jul 2018 17:22:41 +0000 (19:22 +0200)]
treewide: use wpad-basic for not small flash targets

Add out of the box support for 802.11r and 802.11w to all targets not
suffering from small flash.

Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias did all the heavy lifting on this, but I'm the one who should
get shouted at for committing.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
(backported from 80c61c161ac5943137ade233d62cf89d746de5a2)

6 years agohostapd: add basic variant
Kevin Darbyshire-Bryant [Mon, 9 Jul 2018 12:16:42 +0000 (13:16 +0100)]
hostapd: add basic variant

Add a basic variant which provides WPA-PSK only, 802.11r and 802.11w and
is intended to support 11r & 11w (subject to driver support) out of the
box.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
(backported from 1063d904b78297b3e21a352bed19bd312235ff65)

6 years agoppp: don't start ppp with IPv6 support if ipv6 is not supported
Rosy Song [Thu, 4 Oct 2018 06:46:40 +0000 (14:46 +0800)]
ppp: don't start ppp with IPv6 support if ipv6 is not supported

Signed-off-by: Rosy Song <rosysong@rosinson.com>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
(backported from fd09e251e9f5809bf4f323e4fa644f90e275146e)

6 years agotoolchain/glibc: update to 2.27+
Hans Dedecker [Mon, 15 Oct 2018 09:55:48 +0000 (11:55 +0200)]
toolchain/glibc: update to 2.27+

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
(backported from 79982b26bb01bdbbb9f7c8543e0eb3a1d2437445)

6 years agoramips: refresh mt7621 kernel config
Felix Fietkau [Mon, 15 Oct 2018 08:49:55 +0000 (10:49 +0200)]
ramips: refresh mt7621 kernel config

Signed-off-by: Felix Fietkau <nbd@nbd.name>
(backported from d251a11f60fc8fd506eea8a3b552d66c9bf78e9b)

6 years agokernel: add CONFIG_CC_OPTIMIZE_FOR_* to the default config
Felix Fietkau [Mon, 15 Oct 2018 08:48:58 +0000 (10:48 +0200)]
kernel: add CONFIG_CC_OPTIMIZE_FOR_* to the default config

Avoid repeating them in the target config, they are overwritten by
top-level menuconfig anyway

Signed-off-by: Felix Fietkau <nbd@nbd.name>
(backported from e34ea1b4ff6db504718258cbcc40bdbd730e57a3)

6 years agohostapd: Add WPA-EAP-SUITE-B-192 (WPA3-Enterprise)
Hauke Mehrtens [Tue, 9 Oct 2018 20:50:50 +0000 (22:50 +0200)]
hostapd: Add WPA-EAP-SUITE-B-192 (WPA3-Enterprise)

This adds support for the WPA3-Enterprise mode authentication.

The settings for the WPA3-Enterpriese mode are defined in
WPA3_Specification_v1.0.pdf. This mode also requires ieee80211w and
guarantees at least 192 bit of security.

This does not increase the ipkg size by a significant size.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(backported from 4c3fae4adcd41f43cf734e4d07a457b111a3d864)

6 years agohostapd: Activate Opportunistic Wireless Encryption (OWE)
Hauke Mehrtens [Thu, 4 Oct 2018 20:45:06 +0000 (22:45 +0200)]
hostapd: Activate Opportunistic Wireless Encryption (OWE)

OWE is defined in RFC 8110 and provides encryption and forward security
for open networks.

This is based on the requirements in the Wifi alliance document
Opportunistic_Wireless_Encryption_Specification_v1.0_0.pdf
The wifi alliance requires ieee80211w for the OWE mode.
This also makes it possible to configure the OWE transission mode which
allows it operate an open and an OWE BSSID in parallel and the client
should only show one network.

This increases the ipkg size by 5.800 Bytes.
Old: 402.541 Bytes
New: 408.341 Bytes

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(backported from 18c6c93a3b83831a1e7d7d80c22c477412c56cb4)

6 years agohostapd: Activate Simultaneous Authentication of Equals (SAE)
Hauke Mehrtens [Wed, 3 Oct 2018 21:33:51 +0000 (23:33 +0200)]
hostapd: Activate Simultaneous Authentication of Equals (SAE)

This build the full openssl and wolfssl versions with SAE support which
is the main part of WPA3 PSK.

This needs elliptic curve cryptography which is only provided by these
two external cryptographic libraries and not by the internal
implementation.

The WPA3_Specification_v1.0.pdf file says that in SAE only mode
Protected Management Frames (PMF) is required, in mixed mode with
WPA2-PSK PMF should be required for clients using SAE, and optional for
clients using WPA2-PSK. The defaults are set now accordingly.

This increases the ipkg size by 8.515 Bytes.
Old: 394.026 Bytes
New: 402.541 Bytes

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(backported from 4a009a16d2e87da3cd0b994934d3c3b76ca0455b)

6 years agohostapd: SAE: Do not ignore option sae_require_mfp
Hauke Mehrtens [Wed, 10 Oct 2018 21:36:15 +0000 (23:36 +0200)]
hostapd: SAE: Do not ignore option sae_require_mfp

This patch was send for integration into the hostapd project.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(backported from a1ad1144b61680cfa0803b681a3b55ff8c557022)

6 years agohostapd: backport build fix when OWE is activated
Hauke Mehrtens [Wed, 3 Oct 2018 18:56:41 +0000 (20:56 +0200)]
hostapd: backport build fix when OWE is activated

This backports a compile fix form the hostapd project.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(backported from 779773a0dee759d87c483de266e41164cd851af0)

6 years agohostapd: sync config with default configuration
Hauke Mehrtens [Tue, 2 Oct 2018 22:05:11 +0000 (00:05 +0200)]
hostapd: sync config with default configuration

This replaces the configuration files with the versions from the hostapd
project and the adaptions done by OpenWrt.

The resulting binaries should be the same.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(backported from 4b93b03577cefeed39fb6cadc7aa85706deeb074)

6 years agomac80211: fix A-MSDU packet handling with TCP retransmission
Felix Fietkau [Thu, 11 Oct 2018 13:16:28 +0000 (15:16 +0200)]
mac80211: fix A-MSDU packet handling with TCP retransmission

Improves local TCP throughput and fixes use-after-free bugs that could lead
to crashes.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
(backported from e220ffb5338fc16a9f36662c1a7c32f6923e53ce)

6 years agoath10k-ct: Update to 29-09-2018
Robert Marko [Tue, 9 Oct 2018 13:05:56 +0000 (15:05 +0200)]
ath10k-ct: Update to 29-09-2018

Update ath10k-ct to be able to drop 210-ath10k-fix-recent-bandwidth-conversion-bug.patch
as its upstream.

b9989fbd5d6e ath10k-ct: Add upstream patch to fix peer rate reporting.
ac9224344dbf ath10k-ct: Support sending custom frames with no-ack flag.
bc938bc2021e ath10k-ct: Support sending pkts with specific rate on 10.4 firmware.

Runtime tested on:
- GL-iNet GL-B1300
- Mikrotik RB912 + QCA9882

Signed-off-by: Robert Marko <robimarko@gmail.com>
[Added list of all changes from previous version + add own test device]
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
(backported from b1ab8fac5aad75e1396b7187b396dac0fc4623d0)

6 years agoprocd: update to latest git HEAD
John Crispin [Thu, 11 Oct 2018 06:42:24 +0000 (08:42 +0200)]
procd: update to latest git HEAD

94944ab procd: Add cpu string to board detection

Signed-off-by: John Crispin <john@phrozen.org>
(backported from d24bdaa794fec4173859e45ac3b7c773b199bd45)

6 years agopackage/: fix $(PROJECT_GIT) usage
John Crispin [Thu, 11 Oct 2018 06:37:59 +0000 (08:37 +0200)]
package/: fix $(PROJECT_GIT) usage

Signed-off-by: John Crispin <john@phrozen.org>
(backported from 3e8ef61c01799f477e2f6f6c227a0da79cf53f51)

6 years agoprocd: Install hotplug files as 600
Rosen Penev [Wed, 19 Sep 2018 19:03:32 +0000 (12:03 -0700)]
procd: Install hotplug files as 600

procd runs as root, so it only makes sense that its files are restricted.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
(backported from 82d272efed4c9907e8577fa541a2f2c2db713cce)

6 years agolinux-atm: Install hotplug file as 600
Rosen Penev [Wed, 19 Sep 2018 19:03:31 +0000 (12:03 -0700)]
linux-atm: Install hotplug file as 600

The hotplug files is only used by procd, which runs as root.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
(backported from 4572d996a42d86901783f9671026cee8aa4e15fc)

6 years agocomgt: Install hotplug and netifd files as 600
Rosen Penev [Wed, 19 Sep 2018 19:03:30 +0000 (12:03 -0700)]
comgt: Install hotplug and netifd files as 600

procd and netifd both run as root. These files are not used elsewhere.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
(backported from c7144ec688192c83ec91c4a4ff4f5db06c11e469)

6 years agosamba36: Install several config files as 600
Rosen Penev [Wed, 19 Sep 2018 19:03:29 +0000 (12:03 -0700)]
samba36: Install several config files as 600

Hotplug is managed by procd, which runs as root. The other files are used
by root as well.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
(backported from f5ddbd695bcfb8ae8f8c681767beb6ee9770695d)

6 years agosoloscli: Install hotplug file as 600
Rosen Penev [Wed, 19 Sep 2018 19:03:28 +0000 (12:03 -0700)]
soloscli: Install hotplug file as 600

Hotplug is managed by procd, which runs as root.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
(backported from 745c3acd6476a89995b812c319abea9f3af08eb0)

6 years agofirewall: Install config files as 600
Rosen Penev [Wed, 19 Sep 2018 19:03:26 +0000 (12:03 -0700)]
firewall: Install config files as 600

None of the files in firewall are used by non-root.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
(backported from 49065d227a8ff2b4ceb758b501c5dfeba4dc1e67)

6 years agompc85xx: remove kernel 4.9 support
Magnus Kroken [Fri, 5 Oct 2018 23:46:24 +0000 (01:46 +0200)]
mpc85xx: remove kernel 4.9 support

Signed-off-by: Magnus Kroken <mkroken@gmail.com>
(backported from ba826ce4e7880d81f7c73821f2221e90493cb3f8)

6 years agompc85xx: switch to kernel 4.14
Magnus Kroken [Fri, 5 Oct 2018 23:46:23 +0000 (01:46 +0200)]
mpc85xx: switch to kernel 4.14

Signed-off-by: Magnus Kroken <mkroken@gmail.com>
(backported from 650806d83ab9b59772a3506d6ef9811665552151)

6 years agompc85xx: add kernel 4.14 support
Magnus Kroken [Fri, 5 Oct 2018 23:46:22 +0000 (01:46 +0200)]
mpc85xx: add kernel 4.14 support

Based on patches previously submitted by Achim Gottinger:
http://lists.infradead.org/pipermail/openwrt-devel/2018-June/012719.html

Tested on TP-Link TL-WDR4900 v1.

Signed-off-by: Magnus Kroken <mkroken@gmail.com>
(backported from c83c1804891ac706f2e82f9d6c0aaf6ba290348a)
(rebased patches)
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
6 years agoar71xx: remove linux 4.9 support
Koen Vandeputte [Wed, 10 Oct 2018 09:42:42 +0000 (11:42 +0200)]
ar71xx: remove linux 4.9 support

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
(backported from 13f283198ef49dedd49c106176f80dfffa16c3a8)

6 years agoar71xx: switch to kernel 4.14
Koen Vandeputte [Thu, 30 Aug 2018 17:10:05 +0000 (19:10 +0200)]
ar71xx: switch to kernel 4.14

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
(backported from 77d004de6d09edc6d8a5cf77471d52d4865ae577)

6 years agoe2fsprogs: fix glibc compile issue (FS#1749,FS#1796)
Hans Dedecker [Mon, 8 Oct 2018 14:57:01 +0000 (16:57 +0200)]
e2fsprogs: fix glibc compile issue (FS#1749,FS#1796)

Fixes the following build error:

.../toolchain-i386_pentium4_gcc-7.3.0_glibc/lib/gcc/i486-openwrt-linux-gnu/7.3.0/../../../../i486-openwrt-linux-gnu/bin/ld: ../lib/libcom_err.so: undefined reference to `sem_post’
.../toolchain-i386_pentium4_gcc-7.3.0_glibc/lib/gcc/i486-openwrt-linux-gnu/7.3.0/../../../../i486-openwrt-linux-gnu/bin/ld: ../lib/libcom_err.so: undefined reference to `sem_wait'
.../toolchain-i386_pentium4_gcc-7.3.0_glibc/lib/gcc/i486-openwrt-linux-gnu/7.3.0/../../../../i486-openwrt-linux-gnu/bin/ld: ../lib/libcom_err.so: undefined reference to `sem_init’
.../toolchain-i386_pentium4_gcc-7.3.0_glibc/lib/gcc/i486-openwrt-linux-gnu/7.3.0/../../../../i486-openwrt-linux-gnu/bin/ld: ../lib/libcom_err.so: undefined reference to `sem_destroy’

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
(backported from 16c712501cdcb10f333f4abc027a0dcdb8f8101b)

6 years agoRevert "kernel: add a RPS balancer"
Stijn Tintel [Sun, 7 Oct 2018 10:25:09 +0000 (13:25 +0300)]
Revert "kernel: add a RPS balancer"

This reverts commit 7af1fb9faafbc842fc727c49108f5fc4edc08601.

With the RPS balancer patch, both my APU2s are crashing, sometimes just
after a few minutes of uptime.

[ 6241.170132] BUG: unable to handle kernel paging request at ffffffffa20a75a8
[ 6241.177248] IP: get_rps_cpu+0x41c/0x440
[ 6241.181140] PGD 2012067 P4D 2012067 PUD 2013063 PMD 0
[ 6241.186370] Oops: 0000 [#1] SMP NOPTI
[ 6241.190080] Modules linked in: pppoe ppp_async pptp pppox ppp_mppe ppp_generic nf_nat_pptp nf_flow_table_ipv6 nf_flow_table_ipv4 nf_flow_table_inet nf_conntrack_pptp lzo iptable_nat ipt_REJECT ipt_MASQUERADE ftdi_sio xt_time xt_tcpudp xt_tcpmss xt_string xt_statistic xt_state xt_recent xt_quota xt_policy xt_pkttype xt_owner xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_esp xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_bpf xt_addrtype xt_TCPMSS xt_REDIRECT xt_NFQUEUE xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CT xt_CLASSIFY wireguard usbserial ts_fsm ts_bm spidev slhc rfcomm nft_set_rbtree nft_set_hash nft_reject_ipv6 nft_reject_ipv4 nft_reject_inet nft_reject nft_redir_ipv4 nft_redir nft_quota nft_numgen nft_nat nft_meta nft_masq_ipv4 nft_masq
[ 6241.261735]  nft_log nft_limit nft_flow_offload nft_exthdr nft_ct nft_counter nft_chain_route_ipv6 nft_chain_route_ipv4 nft_chain_nat_ipv4 nfnetlink_queue nf_tables_ipv6 nf_tables_ipv4 nf_tables_inet nf_tables nf_reject_ipv4 nf_nat_tftp nf_nat_snmp_basic nf_nat_sip nf_nat_redirect nf_nat_proto_gre nf_nat_masquerade_ipv6 nf_nat_masquerade_ipv4 nf_nat_irc nf_conntrack_ipv6 nf_nat_ipv6 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat_h323 nf_nat_ftp nf_nat_amanda nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_tftp nf_conntrack_snmp nf_conntrack_sip nf_conntrack_rtcache nf_conntrack_proto_gre nf_conntrack_netlink nf_conntrack_irc nf_conntrack_h323 nf_conntrack_ftp nf_conntrack_broadcast ts_kmp nf_conntrack_amanda macvlan lzo_decompress lzo_compress libcrc32c kvm irqbypass
[ 6241.333427]  iptable_raw iptable_mangle iptable_filter ipt_ah ipt_ECN ip_tables hidp hci_uart crc_ccitt cdc_acm btusb btintel br_netfilter bnep bluetooth sch_cake tcp_bbr sch_teql em_nbyte sch_codel sch_prio sch_pie act_ipt em_meta sch_gred sch_dsmark cls_basic em_cmp em_text act_police sch_sfq sch_fq sch_multiq sch_red act_connmark nf_conntrack act_skbedit act_mirred em_u32 cls_u32 cls_tcindex cls_flow cls_route cls_fw sch_tbf sch_htb sch_hfsc sch_ingress configs evdev i2c_piix4 kfifo_buf industrialio i2c_dev xt_set ip_set_list_set ip_set_hash_netiface ip_set_hash_netport ip_set_hash_netnet ip_set_hash_net ip_set_hash_netportnet ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set
[ 6241.405252]  nfnetlink ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables ip_gre gre igb i2c_algo_bit ifb ip6_vti ip_vti sit l2tp_netlink l2tp_core ipcomp6 xfrm6_tunnel xfrm6_mode_tunnel xfrm6_mode_transport xfrm6_mode_beet esp6 ah6 ipcomp xfrm4_tunnel xfrm4_mode_tunnel xfrm4_mode_transport xfrm4_mode_beet esp4 ah4 ip6_tunnel tunnel6 tunnel4 ip_tunnel veth snd_compress snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_rawmidi snd_seq_device snd_hwdep snd soundcore mpls_gso mpls_iptunnel mpls_router af_key xfrm_user xfrm_ipcomp xfrm_algo br2684 atm regmap_mmio vxlan udp_tunnel ip6_udp_tunnel ecdh_generic sha512_ssse3 sha512_generic sha256_ssse3 sha1_ssse3 seqiv jitterentropy_rng drbg md5 kpp ccp_crypto rsa_generic mpi asn1_decoder akcipher ccp sha256_generic
[ 6241.477726]  sha1_generic hmac ghash_generic gcm echainiv des_generic deflate zlib_deflate ctr cmac ccm cbc authenc crypto_acompress sdhci_pltfm pf_ring sp5100_tco leds_apu2 gpio_nct5104d button_hotplug ptp pps_core
[ 6241.497122] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.14.73 #0
[ 6241.503198] Hardware name: PC Engines apu2/apu2, BIOS v4.8.0.2 20180705
[ 6241.509858] task: ffff88012a0d8000 task.stack: ffffc90000070000
[ 6241.515841] RIP: 0010:get_rps_cpu+0x41c/0x440
[ 6241.520246] RSP: 0018:ffff88012ed83db0 EFLAGS: 00010286
[ 6241.525511] RAX: 00000000ffffffff RBX: 0000000000011ae8 RCX: 0000000000000001
[ 6241.532737] RDX: 00000000ffffffff RSI: ffff88012a0d8788 RDI: 0000000000000282
[ 6241.539956] RBP: ffff88012ed83e00 R08: 0000000000000001 R09: 0000000000000000
[ 6241.547183] R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff82dae2e0
[ 6241.554403] R13: ffff880124de4480 R14: 0000000000000000 R15: ffff880128120000
[ 6241.561625] FS:  0000000000000000(0000) GS:ffff88012ed80000(0000) knlGS:0000000000000000
[ 6241.569820] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 6241.575651] CR2: ffffffffa20a75a8 CR3: 00000001251da000 CR4: 00000000000406e0
[ 6241.582830] Call Trace:
[ 6241.585322]  <IRQ>
[ 6241.587372]  ? lock_acquire+0x59/0x80
[ 6241.591102]  netif_receive_skb_internal+0x1e4/0x2d0
[ 6241.596037]  napi_gro_receive+0x48/0x90
[ 6241.599948]  igb_alloc_rx_buffers+0xc97/0x1b60 [igb]
[ 6241.604981]  ? note_gp_changes+0x76/0xc0
[ 6241.608963]  net_rx_action+0x10c/0x280
[ 6241.612752]  __do_softirq+0xf0/0x22d
[ 6241.616375]  irq_exit+0x5e/0xa0
[ 6241.619573]  do_IRQ+0xee/0x110
[ 6241.622682]  common_interrupt+0x8b/0x8b
[ 6241.626556]  </IRQ>
[ 6241.628699] RIP: 0010:native_safe_halt+0x6/0x10
[ 6241.633260] RSP: 0018:ffffc90000073e10 EFLAGS: 00000202 ORIG_RAX: ffffffffffffff3d
[ 6241.640910] RAX: ffff88012a0d8000 RBX: ffff88012a190c00 RCX: 0000000000000000
[ 6241.648110] RDX: ffff88012a0d8000 RSI: 0000000000000001 RDI: ffff88012a0d8000
[ 6241.655354] RBP: ffffc90000073e10 R08: 0000000000000006 R09: 0000000000000000
[ 6241.662554] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88012a190c64
[ 6241.669791] R13: 0000000000000001 R14: 0000000000000001 R15: 0000000000000001
[ 6241.676986]  acpi_safe_halt.part.9+0xe/0x20
[ 6241.681226]  acpi_idle_do_entry+0x2c/0x40
[ 6241.685325]  acpi_idle_enter+0x1ee/0x2b0
[ 6241.689298]  ? sched_clock+0x9/0x10
[ 6241.692839]  cpuidle_enter_state+0x1f2/0x230
[ 6241.697162]  cpuidle_enter+0x12/0x20
[ 6241.700803]  call_cpuidle+0x38/0x40
[ 6241.704335]  do_idle+0xed/0x160
[ 6241.707557]  cpu_startup_entry+0x6e/0x70
[ 6241.711557]  start_secondary+0x1b4/0x1d0
[ 6241.715536]  secondary_startup_64+0xa5/0xb0
[ 6241.719777] Code: d4 48 8d 04 9b 48 8b 35 53 a7 ac 00 48 8d 1c 43 48 83 c6 64 48 c1 e3 03 48 8d bb e8 e2 da 82 e8 cb a9 ba ff 41 8b 14 1c 48 89 d0 <48> 0f a3 15 dc dc b6 00 0f 83 46 fc ff ff 48 83 c4 28 5b 41 5c
[ 6241.739100] RIP: get_rps_cpu+0x41c/0x440 RSP: ffff88012ed83db0
[ 6241.744993] CR2: ffffffffa20a75a8
[ 6241.748373] ---[ end trace 77367d9f9830d5bc ]---

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
(backported from b134b3299c99f468a1c0055580dad1aa71b6b63c)

6 years agosunxi: add support for Orange Pi Zero
Julian Haupt [Sun, 30 Sep 2018 14:42:03 +0000 (14:42 +0000)]
sunxi: add support for Orange Pi Zero

Signed-off-by: Julian Haupt <julian.haupt@hauptmedia.de>
(backported from 0308385d1d78b81ae8fb05cb588fb91f646e3c37)

6 years agoimage: ignore usign build errors
Hauke Mehrtens [Tue, 2 Oct 2018 20:43:58 +0000 (22:43 +0200)]
image: ignore usign build errors

The tl-wa850re-v2 images from the ar71xx/tiny target are getting too big
with the default packages. The size check is done before the meta data
is added so there is no file to add meta data to or to sign. Originally
errors in Build/append-metadata were getting ignored, but if the signing
fails the error is not ignored.
This adds a check if the file to be signed is there and only does the
signing if it is there. This way it does not fail if the package
creation was already aborted earlier.

Fixes: 848b455d2e94 ("image: use ucert to append signature")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(backported from 5933958168c84d7ade94ce8bec451da2df064ead)

6 years agofstools: filter unknown action in mount.hotplug script
Rosy Song [Sun, 23 Sep 2018 01:57:29 +0000 (09:57 +0800)]
fstools: filter unknown action in mount.hotplug script

Signed-off-by: Rosy Song <rosysong@rosinson.com>
(backported from 0fa1dd71ccf5456e1a55dd492e9a42d9b71185ba)

6 years agobusybox: fix IPv6 dependency
Hans Dedecker [Sun, 7 Oct 2018 18:37:47 +0000 (20:37 +0200)]
busybox: fix IPv6 dependency

Commit 9f0cb135dd made BUSYBOX_CONFIG_FEATURE_IPV6 dependant on IPV6 but
did not make its default value BUSYBOX_DEFAULT_FEATURE_IPV6 dependant
on IPV6. BUSYBOX_DEFAULT_FEATURE_IPV6 will have as default value y if
IPV6 is enabled otherwise n.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
(backported from ec9576607d19ddda04334142bdd7feef8cb5c5ca)

6 years agonghttp2: bump to 1.34.0
Hans Dedecker [Sun, 7 Oct 2018 15:35:06 +0000 (17:35 +0200)]
nghttp2: bump to 1.34.0

2b085815 (tag: v1.34.0) Update manual pages
986fa302 Bump up version number to 1.34.0, LT revision to 31:1:17
7c8cb3a0 nghttpx: Improve CONNECT response status handling
334c439c Fix bug that regular CONNECT does not work
6700626c Rule out content-length in the successful response to CONNECT
15162add Update manual pages
93270777 Merge pull request #1235 from nghttp2/backend-conn-timeout
aeb92bbb nghttpx: Add read/write-timeout parameters to backend option
fc7489e0 nghttpx: Fix mruby parameter validation
87ac872f nghttpx: Update doc
c278adde nghttpx: Log error when mruby file cannot be opened
f94d7209 Merge pull request #1234 from nghttp2/nghttpx-rfc8441
9b9baa6b Update doc
02566ee3 nghttpx: Update doc
3002f31b src: Add debug output for SETTINGS_ENABLE_CONNECT_PROTOCOL
d2a594a7 nghttpx: Implement RFC 8441 Bootstrapping WebSocket with HTTP/2
651e1477 Allow client sending :protocol optimistically
a42faf1c nghttpx: Write TLS alert during handshake
4aac05e1 Merge pull request #1231 from nghttp2/ws-lib-only
b80dfaa8 Adjustment for RFC 8441
a19d8f5d Deal with :protocol pseudo header
33f6e90a Add NGHTTP2_TOKEN__PROTOCOL
ed7fabcb Add SETTINGS_ENABLE_CONNECT_PROTOCOL
8753b6da Update doc
f2de733b Update neverbleed to fix OpenSSL 1.1.1 issues
88ff8c69 Update mruby 1.4.1
a63558a1 nghttpx: Call OCSP_response_get1_basic only when OCSP status is successful
3575a132 nghttpx: Fix crash with plain text HTTP
e2de2fee Update bash_completion
9f415979 Update manual pages
4bfc0cd1 Merge pull request #1230 from nghttp2/nghttpx-faster-logging
9c824b87 nghttpx: Get rid of std::stringstream from Log
a1ea1696 Make VALID_HD_NAME_CHARS and VALID_HD_VALUE_CHARS const qualified
dfc0f248 Make static_table const qualified
ed7c9db2 nghttpx: Add mruby env.tls_handshake_finished
5b42815a nghttpx: Strip incoming Early-Data header field by default
cfe7fa9a nghttpx: Add --tls13-ciphers and --tls-client-ciphers options
cb8a9d58 src: Remove TLSv1.3 ciphers from DEFAULT_CIPHER_LIST
023b9448 Merge branch 'tls13-early-data'
9b03c64f nghttpx: Should postpone early data by default
b8eccec6 nghttpx: Disable OpenSSL anti-replay
9f212587 Specify SSL_CTX_set_max_early_data and add an option to change max value
47f60124 nghttpx: Add an option to postpone early data processing
770e44de Implement draft-ietf-httpbis-replay-02
2ab319c1 Don't hide error code from openssl
39923024 Remove SSL_ERROR_WANT_WRITE handling
b30f312a Honor SSL_read semantics
c5cdb78a nghttpx: Add TLSv1.3 0-RTT early data support
f79a5812 Bump up version number to 1.34.0

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
(backported from 329f2d5457444e940dbb3bca4490abd8bccce24d)

6 years agoipq40xx: Create /var/lock directory in platform_do_upgrade_*
Sven Eckelmann [Mon, 1 Oct 2018 09:48:04 +0000 (11:48 +0200)]
ipq40xx: Create /var/lock directory in platform_do_upgrade_*

The sysupgrade_pre_upgrade hook was removed with 5e1b4c57ded7 ("base-files:
drop fwtool_pre_upgrade") while there were still scripts using it:

* target/linux/ar71xx/base-files/lib/upgrade/allnet.sh
* target/linux/ar71xx/base-files/lib/upgrade/openmesh.sh
* target/linux/ipq40xx/base-files/lib/upgrade/openmesh.sh

Not running the hooks can either prevent a successful upgrade or brick the
device because the fw_setenv program cannot be started correctly.

Instead of adding this hook again, the directory /var/lock for fw_setenv
can also just be created directly before fw_setenv is called.

Fixes: 5e1b4c57ded7 ("base-files: drop fwtool_pre_upgrade")
Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
(backported from ebd57de1f9894a91991fe19f200dba7b1104390c)

6 years agoar71xx: Create /var/lock directory in platform_do_upgrade_*
Sven Eckelmann [Mon, 1 Oct 2018 09:48:04 +0000 (11:48 +0200)]
ar71xx: Create /var/lock directory in platform_do_upgrade_*

The sysupgrade_pre_upgrade hook was removed with 5e1b4c57ded7 ("base-files:
drop fwtool_pre_upgrade") while there were still scripts using it:

* target/linux/ar71xx/base-files/lib/upgrade/allnet.sh
* target/linux/ar71xx/base-files/lib/upgrade/openmesh.sh
* target/linux/ipq40xx/base-files/lib/upgrade/openmesh.sh

Not running the hooks can either prevent a successful upgrade or brick the
device because the fw_setenv program cannot be started correctly.

Instead of adding this hook again, the directory /var/lock for fw_setenv
can also just be created directly before fw_setenv is called.

Fixes: 5e1b4c57ded7 ("base-files: drop fwtool_pre_upgrade")
Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
(backported from c383e0c979fb95ef6de6782112aa86045fe4a6a5)

6 years agoar71xx: Use sysupgrade's RAMFS_COPY_* for fw_(set|print)env
Sven Eckelmann [Mon, 1 Oct 2018 10:27:25 +0000 (12:27 +0200)]
ar71xx: Use sysupgrade's RAMFS_COPY_* for fw_(set|print)env

The install_bin from /lib/upgrade/common.sh is no longer creating the
symlinks when a secondary parameter is added. But the fw_setenv program was
always copied this way to the ramdisk for the upgrade.

Instead, this should be done using RAMFS_COPY_* like on all other
platforms.

Fixes: 438dcbfe74a6 ("base-files: automatically handle paths and symlinks for RAMFS_COPY_BIN")
Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
(backported from 11d51276b1b0ac6a556a776374ca3de07b062e29)

6 years agoramips: don't hijack the status led
Mathias Kresin [Wed, 29 Aug 2018 06:58:33 +0000 (08:58 +0200)]
ramips: don't hijack the status led

Don't hijack the status led to indicate the wireless state. If we don't
have a dedicated wireless led, it's as simply as the wireless status
can't be indicated.

Such a led misuse should be set by the user and not shipped by default.

Signed-off-by: Mathias Kresin <dev@kresin.me>
(backported from b07b3ddaad233291e47da1f61b018e0d7314952f)

6 years agoramips: move status led unset to devicetree
Mathias Kresin [Tue, 28 Aug 2018 05:04:40 +0000 (07:04 +0200)]
ramips: move status led unset to devicetree

Release the led used for boot status indication via devicetree instead
of setting a default off trigger in userspace.

Signed-off-by: Mathias Kresin <dev@kresin.me>
(backported from c074239c79ae8704c96e4e1ba94dde3015a882c9)

6 years agoramips: add support for indicating the boot state using multiple leds
Mathias Kresin [Tue, 28 Aug 2018 04:54:27 +0000 (06:54 +0200)]
ramips: add support for indicating the boot state using multiple leds

Use diag.sh version used for other targets supporting different leds
for the different boot states.

The existing led sequences should be the same as before.

Signed-off-by: Mathias Kresin <dev@kresin.me>
(backported from 8f4dfadd5a4370e455f08967bfe9b7c9125576e8)

6 years agoramips: set F5D8235 v1 usb led trigger via devicetree
Mathias Kresin [Fri, 17 Aug 2018 14:41:17 +0000 (16:41 +0200)]
ramips: set F5D8235 v1 usb led trigger via devicetree

Assign the usbdev trigger via devicetree and drop the userspace
handling of the usb leds.

Signed-off-by: Mathias Kresin <dev@kresin.me>
(backported from 772b27c207364f31f8b34b80a94647810fdb581c)

6 years agoramips: set rt2880 pci controller of_node
Mathias Kresin [Tue, 28 Aug 2018 21:35:33 +0000 (23:35 +0200)]
ramips: set rt2880 pci controller of_node

Set the PCI controller of_node such that PCI devices can be
instantiated via device tree.

Signed-off-by: Mathias Kresin <dev@kresin.me>
(backported from 04eab0a1c9fb68bd8678c57ca3c6dcc8347b611a)

6 years agoramips: set usb led trigger via devicetree
Mathias Kresin [Mon, 13 Aug 2018 15:14:08 +0000 (17:14 +0200)]
ramips: set usb led trigger via devicetree

Assign the usbdev trigger via devicetree for all subtargets and drop
the userspace handling of the usb leds.

With the change all usb ports are triggering the usb led instead of
only usb 1.1 XOR usb 2.0 XOR usb 3.0 as it was before.

Signed-off-by: Mathias Kresin <dev@kresin.me>
(backported from a58535771f115c1c95c91ce6af769852d64a8f27)

6 years agoath79: Add generic device tree for Ubiquiti WA boards
Tobias Schramm [Tue, 4 Sep 2018 13:05:47 +0000 (15:05 +0200)]
ath79: Add generic device tree for Ubiquiti WA boards

Signed-off-by: Tobias Schramm <tobleminer@gmail.com>
(backported from bc5761f90b4937ba56400eccee781d9a01141b49)

6 years agomkfwimage: Add image type definition for WA images
Tobias Schramm [Wed, 24 Jan 2018 00:38:14 +0000 (01:38 +0100)]
mkfwimage: Add image type definition for WA images

This patch adds a new type of ubiquiti image, the WA image. First seen
on the NanoStation AC loco the generic name implies that we will see
this type of image on more ubiquiti devices thus it makes sense to
implement it in mkfwimage.

The main difference is that WA images are signed. The "END" header has
been replaced by a "ENDS" header followed by a 2048 bit RSA signature.
This signature is not being generated by mkfwimage and filled with 0x00.

Signed-off-by: Tobias Schramm <tobleminer@gmail.com>
(backported from 8f697e406a99ad28872cad866816d8c062582bf1)

6 years agointel-microcode: update to version 20180807a
Hauke Mehrtens [Sat, 6 Oct 2018 13:49:20 +0000 (15:49 +0200)]
intel-microcode: update to version 20180807a

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(backported from 90bb790fbf249b71d518c6b68b97634c1ea8b2d8)

6 years agouboot-lantiq: fix compile with modern host dtc
Thomas Nixon [Tue, 4 Sep 2018 20:54:58 +0000 (21:54 +0100)]
uboot-lantiq: fix compile with modern host dtc

In dtc version 1.4.6 the macro names in header include guards changed,
but the build relies on them matching in order to replace selected
headers. This is a horrible hack to work around this.

Signed-off-by: Thomas Nixon <tom@tomn.co.uk>
(backported from 6b729e15637ab2ab34815e73c1e774c3469d7522)
(rebased patches)
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
6 years agouboot-envtools: adds r7800 uboot env support
Ansuel Smith [Sun, 30 Sep 2018 17:21:39 +0000 (19:21 +0200)]
uboot-envtools: adds r7800 uboot env support

This fix and adds support for r7800 uboot env

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
(backported from 43e71e04167db90c5ff7cf0b5ffdb2388217cbf3)

6 years agobcm53xx: added basic dts for linksys ea6500v2
Rene Kjellerup [Sun, 22 Oct 2017 00:19:03 +0000 (17:19 -0700)]
bcm53xx: added basic dts for linksys ea6500v2

only thing not working is the b43 5GHz wifi band as upstream
kernel
doesn't supporthe 0x4360 chip so far

Signed-off-by: Rene Kjellerup <rk.katana.steel@gmail.com>
(backported from 53be2d2a4eaba78c1f2053589f16cf95ae9c5dd1)
(rebased patches)
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
6 years agomac80211: Use @KERNEL alias instead of hardlink
Daniel Engberg [Fri, 5 Oct 2018 06:31:56 +0000 (08:31 +0200)]
mac80211: Use @KERNEL alias instead of hardlink

Use @KERNEL alias provided by toolchain instead of relying on a specific site.

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
(backported from 6e6e7adc8cf70aa8d4f4efb13728960e992d016c)

6 years agobinutils: Use 2.31.1 by default
Daniel Engberg [Fri, 17 Aug 2018 21:40:29 +0000 (23:40 +0200)]
binutils: Use 2.31.1 by default

Set binutils 2.31.1 as default

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
(backported from fface27db82e7926c86a6b15746446f633d533f3)

6 years agotoolchain/binutils: Fix u-boot on some armhf platforms
Daniel Engberg [Sat, 6 Oct 2018 10:55:02 +0000 (12:55 +0200)]
toolchain/binutils: Fix u-boot on some armhf platforms

Backport commit 3d9c8f6b3f033a6092425b7344647fb51dbed5c6
Without this binutils doesn't properly link u-boot

Source:
https://sourceware.org/bugzilla/show_bug.cgi?id=23571

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
(backported from 754a08e8d918da17d429d40b54035cc600afb45a)

6 years agotools/cmake: Update to 3.12.3
Daniel Engberg [Sat, 6 Oct 2018 10:37:22 +0000 (12:37 +0200)]
tools/cmake: Update to 3.12.3

Update CMake to 3.12.3

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
(backported from f6159c1e37429b6505094cfd4b6c09f4634fea38)

6 years agotools/bison: Update to 3.1
Daniel Engberg [Sat, 6 Oct 2018 10:41:52 +0000 (12:41 +0200)]
tools/bison: Update to 3.1

Update bison to 3.1

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
(backported from 9efd0cb403f68bd728a40e069a7d04b623f469e6)

6 years agotoolchain/fortify-headers: Update to 1.0
Daniel Engberg [Sat, 6 Oct 2018 10:39:51 +0000 (12:39 +0200)]
toolchain/fortify-headers: Update to 1.0

Update fortify-headers to 1.0

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
(backported from 969d052e960c8d52425442c583003eac3f9f26f6)

6 years agotools/libressl: Update to 2.8.1
Daniel Engberg [Sat, 6 Oct 2018 10:44:04 +0000 (12:44 +0200)]
tools/libressl: Update to 2.8.1

Update libressl to 2.8.1

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
(backported from 6bdc6cdd044eea221efbdf0250313415526b3593)

6 years agotools/mtools: Update to 4.0.19
Daniel Engberg [Sat, 6 Oct 2018 10:47:46 +0000 (12:47 +0200)]
tools/mtools: Update to 4.0.19

Update mtools to 4.0.19

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
(backported from 7808ba86eafdae923464f6080f9a2076e8fbf87a)

6 years agomac80211: move marvell packaging code to marvell.mk
Felix Fietkau [Sat, 29 Sep 2018 18:13:55 +0000 (20:13 +0200)]
mac80211: move marvell packaging code to marvell.mk

Signed-off-by: Felix Fietkau <nbd@nbd.name>
(backported from 502bcd93fe3308e9dff39c5941606fc64807d46d)

6 years agomac80211: move intel packaging code to intel.mk
Felix Fietkau [Sat, 29 Sep 2018 18:10:23 +0000 (20:10 +0200)]
mac80211: move intel packaging code to intel.mk

Signed-off-by: Felix Fietkau <nbd@nbd.name>
(backported from 2804a7f13e119d337d84047ca2ac6577ab814406)

6 years agomac80211: move realtek packaging code to realtek.mk
Felix Fietkau [Sat, 29 Sep 2018 18:07:06 +0000 (20:07 +0200)]
mac80211: move realtek packaging code to realtek.mk

Signed-off-by: Felix Fietkau <nbd@nbd.name>
(backported from 1f14ac9a0c93353c14b4d48e0bda498728c53117)

6 years agomac80211: move broadcom packaging code to broadcom.mk
Felix Fietkau [Sat, 29 Sep 2018 18:02:28 +0000 (20:02 +0200)]
mac80211: move broadcom packaging code to broadcom.mk

Signed-off-by: Felix Fietkau <nbd@nbd.name>
(backported from 7f984dab1c5238f54751c6d42599606464c92cdc)