John Crispin [Mon, 1 Dec 2014 16:15:37 +0000 (16:15 +0000)]
oxnas: change visible board name
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43475
John Crispin [Mon, 1 Dec 2014 16:15:30 +0000 (16:15 +0000)]
oxnas: ehci: rename vendor prefix plxtch to plxtech
it was changed in DTS by commit
oxnas-target: fix typo in OX820 device-tree
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43474
John Crispin [Mon, 1 Dec 2014 16:15:20 +0000 (16:15 +0000)]
hostapd: improve 802.1x dynamic vlan support with bridge names
In r41872 and r42787 Dynamic VLAN support was reintroduced, but the vlan_bridge
parameter is not read while setting up the config, so the default is used which
is undesirable for some uses.
Signed-off-by: Ben Franske <ben.mm@franske.com>
SVN-Revision: 43473
John Crispin [Mon, 1 Dec 2014 16:15:13 +0000 (16:15 +0000)]
base-files: default_postinst() - create user:group first (resend)
create user:group before running postinst-pkg. the postinst hook might require
the user:group to already exist.
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
SVN-Revision: 43472
John Crispin [Mon, 1 Dec 2014 16:15:08 +0000 (16:15 +0000)]
ar8216: factor out reg_port_stats_base parameters to ar8xxx_chip
Factor out reg_port_stats_base parameters to ar8xxx_chip.
Remove related chip_is_... checks.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 43471
John Crispin [Mon, 1 Dec 2014 16:15:02 +0000 (16:15 +0000)]
ar8216: factor out mii_lo_first to ar8xxx_chip
Factor out mii_lo_first to ar8xxx_chip.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 43470
John Crispin [Mon, 1 Dec 2014 16:14:54 +0000 (16:14 +0000)]
ar8216: factor out chip-specific data structures from ar8xxx_priv
Factor out chip-specific data structures from ar8xxx_priv.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 43469
John Crispin [Mon, 1 Dec 2014 16:14:43 +0000 (16:14 +0000)]
ar8216: factor out set_mirror_regs to ar8xxx_chip
Factor out set_mirror_regs to ar8xxx_chip.
Remove related chip_is_... checks.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 43468
John Crispin [Mon, 1 Dec 2014 16:14:39 +0000 (16:14 +0000)]
ar8216: factor out mib_func to ar8xxx_chip
Factor out mib_func to ar8xxx_chip. Remove related chip_is_... checks.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 43467
John Crispin [Mon, 1 Dec 2014 16:14:32 +0000 (16:14 +0000)]
ar8216: factor out info whether switch should be configured at probe stage to ar8xxx_chip
Factor out info whether switch should be configured at probe stage
to ar8xxx_chip. Remove related chip_is_... checks.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 43466
John Crispin [Mon, 1 Dec 2014 16:14:26 +0000 (16:14 +0000)]
realview: add 3.14 support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43465
John Crispin [Mon, 1 Dec 2014 16:14:21 +0000 (16:14 +0000)]
ixp4xx: add 3.14 support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43464
John Crispin [Mon, 1 Dec 2014 16:14:07 +0000 (16:14 +0000)]
au1000: add 3.14 support
this is only compile tested
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43463
John Crispin [Mon, 1 Dec 2014 16:14:02 +0000 (16:14 +0000)]
ar71xx: Add build profile for the gl-inet 6416A and 6408A
Patch to add the buildprofile for the GL-Init-6408A-v1 and the GL-Inet-6416A-v1
Both devices are identical, only difference is one comes with 8MB flash and
the other with 16MB flash
Official website: http://www.gl-inet.com/w/?page_id=241&lang=en
Comprehensive list of specs: https://revspace.nl/GL-Inet
Signed-off-by: Martijn Zilverschoon <martijn@friedzombie.com>
SVN-Revision: 43462
Jonas Gorski [Mon, 1 Dec 2014 13:27:26 +0000 (13:27 +0000)]
brcm63xx: add kernel 3.18 support
Add 3.18 support based on 3.18-rc6. Only netboot tested.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 43461
Jonas Gorski [Mon, 1 Dec 2014 13:27:06 +0000 (13:27 +0000)]
toolchain-headers: also copy asm-eva.h for mips(el) for 3.15+
Kernel 3.15's asm.h includes eva-asm.h, so copy it also, else lzma-loader
won't compile due to a missing include.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 43460
Luka Perkov [Mon, 1 Dec 2014 12:40:06 +0000 (12:40 +0000)]
util-linux: package libsmartcols
Packages fdisk and lsblk were missing dependency for libsmartcols.so.1
Add package for libsmartcols and add dependency from fdisk and lsblk.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43459
Felix Fietkau [Mon, 1 Dec 2014 11:07:30 +0000 (11:07 +0000)]
mkimage: remove check for miscompiled __weak
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43458
Jonas Gorski [Mon, 1 Dec 2014 00:52:07 +0000 (00:52 +0000)]
brcm63xx: register interrupt-controllers through DT when possible
Add the required nodes for the interrupt controllers and register
them through DT when a DTB is present.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 43457
Jonas Gorski [Mon, 1 Dec 2014 00:51:56 +0000 (00:51 +0000)]
brcm63xx: dtsi: add missing ranges properity to ubus nodes
Allows nodes behind it to be mapped.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 43456
Jonas Gorski [Mon, 1 Dec 2014 00:51:53 +0000 (00:51 +0000)]
brcm63xx: dtsi: add missing properties to cpu nodes
Mark them as cpu nodes and add the addresses.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 43455
Jonas Gorski [Mon, 1 Dec 2014 00:51:51 +0000 (00:51 +0000)]
brcm63xx: convert to irq domain
Add irq-domain aware irqchip drivers for the irq controllers of bcm63xx
and switch to use them.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 43454
Jonas Gorski [Mon, 1 Dec 2014 00:51:24 +0000 (00:51 +0000)]
brcm63xx: refresh patches
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 43453
Jonas Gorski [Mon, 1 Dec 2014 00:51:17 +0000 (00:51 +0000)]
brcm63xx: add DT support for DSL-2650U
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 43452
Jonas Gorski [Mon, 1 Dec 2014 00:51:12 +0000 (00:51 +0000)]
brcm63xx: add DT support for DSL-2740B/DSL-2741B rev F1
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 43451
Jonas Gorski [Mon, 1 Dec 2014 00:51:08 +0000 (00:51 +0000)]
brcm63xx: Add DT support for F@ST2504n
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 43450
Jonas Gorski [Mon, 1 Dec 2014 00:51:04 +0000 (00:51 +0000)]
brcm63xx: add DT support for F@ST2704V2
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 43449
Jonas Gorski [Mon, 1 Dec 2014 00:50:59 +0000 (00:50 +0000)]
brcm63xx: add DT support for F@ST2604
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 43448
Jonas Gorski [Mon, 1 Dec 2014 00:50:56 +0000 (00:50 +0000)]
brcm63xx: add DT support for F@ST2404
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 43447
Felix Fietkau [Sun, 30 Nov 2014 22:22:24 +0000 (22:22 +0000)]
toolchain: uClibc: fix compile with full language support enabled (fixes #13095)
When building with CONFIG_BUILD_NLS=y, uClibc fails to compile with following
message (or similar, according to https://dev.openwrt.org/ticket/13095):
-snip-
...
Warning: adding UNDEFINED entry for ar_AE
Warning: adding UNDEFINED entry for am_ET
Warning: adding UNDEFINED entry for af_ZA
grep "^#define" extra/locale/locale_tables.h > extra/locale/lt_defines.h
grep "^#define __lc" extra/locale/locale_collate.h >> extra/locale/lt_defines.h
gcc extra/locale/gen_wctype.c -o extra/locale/gen_wctype -Os -Wall -D__UCLIBC_GEN_LOCALE -I./
extra/locale/gen_wctype.c: In function 'main':
extra/locale/gen_wctype.c:684:2: warning: #warning fix the upper bound on the upper/lower tables... save 200 bytes or so [-Wcpp]
for locale in en_US en_GB; do \
extra/locale/gen_wctype $locale > extra/locale/wctables.h || \
extra/locale/gen_wctype $locale.UTF-8 > extra/locale/wctables.h || \
extra/locale/gen_wctype $locale.iso8859-1 > extra/locale/wctables.h && break; \
done
make[4]: *** [extra/locale/wctables.h] Error 1
-snap-
This seems to also depend on the host system used, e.g. running a fresh
checkout on a Debian 7.6 system triggered this error, while running the
very same stuff on an Ubuntu 12.10 Quantal Quetzal does not trigger it.
This is the configuration I used:
-snip-
buildbot@buildbot:~/openwrt-nls.git$ scripts/diffconfig.sh
CONFIG_TARGET_ar71xx=y
CONFIG_TARGET_ar71xx_generic=y
CONFIG_TARGET_ar71xx_generic_Default=y
CONFIG_DEVEL=y
CONFIG_BUILD_NLS=y
CONFIG_DOWNLOAD_FOLDER="/srv/downloads/downloads"
-snap-
In the ticket mentioned above, a patch is referenced which solves this issue.
Note, that this issue is also present on 14.07.
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
SVN-Revision: 43446
Felix Fietkau [Sun, 30 Nov 2014 22:22:14 +0000 (22:22 +0000)]
toolchain: uClibc: fix build with CONFIG_BUILD_NLS selected
Without this patch, selecting "Compile with full language support"
results in the following question during build:
...
Locale Support (UCLIBC_HAS_LOCALE) [Y/n/?] y
Locale data
> 1. All locales (UCLIBC_BUILD_ALL_LOCALE) (NEW)
2. Only selected locales (UCLIBC_BUILD_MINIMAL_LOCALE) (NEW)
3. Use Pre-generated Locale Data (UCLIBC_PREGENERATED_LOCALE_DATA) (NEW)
choice[1-3]:
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
SVN-Revision: 43445
Luka Perkov [Sun, 30 Nov 2014 22:12:20 +0000 (22:12 +0000)]
kernel: add missing config symbol for 3.18
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43444
Luka Perkov [Sun, 30 Nov 2014 22:11:09 +0000 (22:11 +0000)]
util-linux: update to 2.25.2
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43443
Felix Fietkau [Sun, 30 Nov 2014 21:05:17 +0000 (21:05 +0000)]
ath5k: fix hardware queue index assignment
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43442
Felix Fietkau [Sun, 30 Nov 2014 20:29:10 +0000 (20:29 +0000)]
tools/mkimage: fix build errors (#18445)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43441
Felix Fietkau [Sun, 30 Nov 2014 20:12:07 +0000 (20:12 +0000)]
gengetopt: fix parallel build issues (#18442)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43440
Felix Fietkau [Sun, 30 Nov 2014 19:41:59 +0000 (19:41 +0000)]
ath9k: fix hardware tx queue allocation order
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43438
Imre Kaloz [Sun, 30 Nov 2014 09:51:48 +0000 (09:51 +0000)]
add gengetopt
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 43437
Luka Perkov [Sun, 30 Nov 2014 03:55:44 +0000 (03:55 +0000)]
uboot-kirkwood: bump to 2014.10
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43436
Luka Perkov [Sun, 30 Nov 2014 03:51:43 +0000 (03:51 +0000)]
malta: add more 3.14 kernel symbols
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43435
Luka Perkov [Sun, 30 Nov 2014 01:20:38 +0000 (01:20 +0000)]
kirkwood: change CRC32 implementation to CRC32_SLICEBY8
At least on my Iomega ix2-200 system, this makes btrfs writes about 30% faster.
Signed-off-by: Richard Kunze <richard.kunze@web.de>
SVN-Revision: 43434
Luka Perkov [Sun, 30 Nov 2014 01:14:17 +0000 (01:14 +0000)]
uboot-envtools: bump to 2014.10
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43433
Luka Perkov [Sun, 30 Nov 2014 01:14:14 +0000 (01:14 +0000)]
kirkwood: refresh kernel config
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43432
Luka Perkov [Sun, 30 Nov 2014 01:14:12 +0000 (01:14 +0000)]
generic: set CONFIG_GENERIC_NET_UTILS
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43431
Luka Perkov [Sat, 29 Nov 2014 23:45:53 +0000 (23:45 +0000)]
uboot-*: update license info in uboot packages
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43429
Luka Perkov [Sat, 29 Nov 2014 22:43:59 +0000 (22:43 +0000)]
mkimage: update to 2014.10
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43428
Luka Perkov [Sat, 29 Nov 2014 10:30:58 +0000 (10:30 +0000)]
kernel: update 3.14 to 3.14.25
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43427
Luka Perkov [Sat, 29 Nov 2014 10:30:55 +0000 (10:30 +0000)]
malta: add support for 3.14
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43426
Luka Perkov [Sat, 29 Nov 2014 10:30:52 +0000 (10:30 +0000)]
malta: drop 3.12 config file
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43425
Rafał Miłecki [Fri, 28 Nov 2014 19:13:24 +0000 (19:13 +0000)]
procd: fix typo in nand.sh s/TRX/TAR/
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43423
Luka Perkov [Fri, 28 Nov 2014 17:53:50 +0000 (17:53 +0000)]
x86: add support for 3.14
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43422
Steven Barth [Fri, 28 Nov 2014 11:41:25 +0000 (11:41 +0000)]
ntp: add hotplug class for ntp-events
Based on a patch by Luiz Angelo Daros de Luca
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 43421
Florian Fainelli [Fri, 28 Nov 2014 01:29:51 +0000 (01:29 +0000)]
kernel: 3.18: Fix patch 644 dependency chain
This patch introduces some code that is compiled in whenever
CONFIG_BRIDGE_NETFILTER is built, with the code called from code compiled under
CONFIG_BRIDGE, CONFIG_BRIDGE_IGMP_SNOOPING or CONFIG_BRIDGE_NF_EBTABLES.
Unfortunately, these options aren't setting explicitly the dependency they now
have on CONFIG_BRIDGE_NETFILTER, for obvious reasons for CONFIG_BRIDGE.
However, this is not working really well when CONFIG_BRIDGE_NETFILTER is built
as a module, since code statically compiled will now use a function that is not
in the kernel image, which makes the linker grumpy.
Solve this by removing the option to build CONFIG_BRIDGE_NETFILTER as a module,
and protect our function definition by an IS_BUILTIN instead of a IS_ENABLED
macro. This fixes the issue for CONFIG_BRIDGE and CONFIG_BRIDGE_IGMP_SNOOPING.
Fixing CONFIG_BRIDGE_NF_EBTABLES has to be handled a bit differently, since it
directly references a variable that will not be declared if
CONFIG_BRIDGE_NETFILTER is not set. Protect the variable affectations by an
ifdef to make sure this doesn't happen.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 43419
Florian Fainelli [Fri, 28 Nov 2014 01:29:41 +0000 (01:29 +0000)]
devel: import perf from oldpackages
perf was in the oldpackages repository, but it makes more sense to have
it part of the default package set since we build it from the Linux
kernel sources.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 43418
Felix Fietkau [Fri, 28 Nov 2014 00:59:57 +0000 (00:59 +0000)]
scripts/config.sub: add back musl support that was accidentally dropped in r43353
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43417
Steven Barth [Fri, 28 Nov 2014 00:39:19 +0000 (00:39 +0000)]
odhcp6c: avoid busylooping with strangely behaving dhcpv6 servers
Thanks to Dave Taht for debugging and thanks to Comcast for
shipping strangely behaving software so I can fix some corner cases.
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 43415
Felix Fietkau [Thu, 27 Nov 2014 20:54:18 +0000 (20:54 +0000)]
cns3xxx: fix PCIe->PCI bridge access (fixes #18422)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43414
Felix Fietkau [Thu, 27 Nov 2014 18:26:24 +0000 (18:26 +0000)]
mpc85xx: update to linux 3.14
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43413
Felix Fietkau [Thu, 27 Nov 2014 18:26:17 +0000 (18:26 +0000)]
mpc85xx: refresh linux 3.14 patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43412
Felix Fietkau [Thu, 27 Nov 2014 18:26:12 +0000 (18:26 +0000)]
mpc85xx: remove the PHY reset change patch (no longer necessary)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43411
Felix Fietkau [Thu, 27 Nov 2014 18:26:06 +0000 (18:26 +0000)]
ar8216: suppress PHY reset for linux 3.14
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43410
Felix Fietkau [Thu, 27 Nov 2014 18:26:00 +0000 (18:26 +0000)]
kernel: backport patches for overriding PHY reset to 3.14
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43409
Felix Fietkau [Thu, 27 Nov 2014 17:26:06 +0000 (17:26 +0000)]
mac80211: update regdb to master-2014-11-18
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43408
Felix Fietkau [Thu, 27 Nov 2014 16:35:23 +0000 (16:35 +0000)]
mt76: fix a compile error on 3.18
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43407
Felix Fietkau [Thu, 27 Nov 2014 16:24:32 +0000 (16:24 +0000)]
cns3xxx: add experimental 3.18 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43406
Felix Fietkau [Thu, 27 Nov 2014 16:24:25 +0000 (16:24 +0000)]
kernel: add missing KEEP() statements for gc-sections patch in 3.18
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43405
Felix Fietkau [Thu, 27 Nov 2014 15:02:11 +0000 (15:02 +0000)]
kernel: keep __bug_table with gc-sections
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43404
Felix Fietkau [Thu, 27 Nov 2014 15:02:05 +0000 (15:02 +0000)]
cns3xxx: fix pcie root bridge topology
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43403
Felix Fietkau [Thu, 27 Nov 2014 15:01:56 +0000 (15:01 +0000)]
firmware-utils: remove dependency on error.h in tplink-safeloader
Fixes build on Mac OS X
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43402
Imre Kaloz [Thu, 27 Nov 2014 14:27:34 +0000 (14:27 +0000)]
add D-link DGL-5500 A1 support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 43401
Steven Barth [Thu, 27 Nov 2014 07:26:10 +0000 (07:26 +0000)]
netifd: correctly handle source-parameter for IPv4 routes
Thanks to Kristian Evensen
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 43400
Felix Fietkau [Wed, 26 Nov 2014 18:48:05 +0000 (18:48 +0000)]
cns3xxx: add missing dma mask for ethernet device
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43399
Felix Fietkau [Wed, 26 Nov 2014 18:01:38 +0000 (18:01 +0000)]
cns3xxx: switch to using the upstream dwc2 driver instead of dwc_otg
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43398
Felix Fietkau [Wed, 26 Nov 2014 18:01:29 +0000 (18:01 +0000)]
cns3xxx: update to linux 3.14
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43397
Felix Fietkau [Wed, 26 Nov 2014 18:01:18 +0000 (18:01 +0000)]
cns3xxx: remove bogus image added in r38703
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43396
Felix Fietkau [Wed, 26 Nov 2014 18:01:07 +0000 (18:01 +0000)]
cns3xxx: set base device for ethernet port netdevs
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43395
Felix Fietkau [Wed, 26 Nov 2014 18:00:52 +0000 (18:00 +0000)]
cns3xxx: fix passing the device to dma mapping ops
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43394
Imre Kaloz [Wed, 26 Nov 2014 11:38:59 +0000 (11:38 +0000)]
fix the r6100's wan led name
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 43393
John Crispin [Wed, 26 Nov 2014 09:00:56 +0000 (09:00 +0000)]
uboot-omap: add C4 revision in findfdt
fixes BeagleBoard C4 detection
error message in serial console was:
"WARNING: Could not determine device tree to use"
change is found in upstream u-boot
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 43392
John Crispin [Wed, 26 Nov 2014 09:00:48 +0000 (09:00 +0000)]
kirkwood: Add support for Iomega StorCenter ix2-200
Signed-off-by: Richard Kunze <richard.kunze@web.de>
SVN-Revision: 43391
John Crispin [Wed, 26 Nov 2014 09:00:40 +0000 (09:00 +0000)]
uboot-envtools: add support for oxnas target
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43390
John Crispin [Wed, 26 Nov 2014 09:00:17 +0000 (09:00 +0000)]
add uboot-oxnas
This adds support for the oxnas target in U-Boot 2014.04
History can be found at https://github.com/kref/u-boot-oxnas up to 2013.10
changes from 2013.10 to 2014.04 can be followed at
https://gitorious.org/openwrt-oxnas
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43389
John Crispin [Wed, 26 Nov 2014 09:00:08 +0000 (09:00 +0000)]
add new target 'oxnas'
This is the oxnas target previously developed at
http://gitorious.org/openwrt-oxnas
Basically, this consolidates the changes and addtionas from
http://github.org/kref/linux-oxnas
into a new OpenWrt hardware target 'oxnas' adding support for
PLX Technology NAS7820/NAS7821/NAS7825/...
formally known as
Oxford Semiconductor OXE810SE/OXE815/OX820/...
For now there are 4 supported boards:
Cloud Engines Pogoplug V3 (without PCIe)
fully supported
Cloud Engines Pogoplug Pro (with PCIe)
fully supported
MitraStar STG-212
aka ZyXEL NSA-212,
aka Medion Akoya P89625 / P89636 / P89626 / P89630,
aka Medion MD 86407 / MD 86805 / MD 86517 / MD 86587
fully supported, see http://wiki.openwrt.org/toh/medion/md86587
Shuttle KD-20
partially supported (S-ATA driver lacks support for 2nd port)
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43388
John Crispin [Wed, 26 Nov 2014 08:59:49 +0000 (08:59 +0000)]
target.mk: add default packages for NAS device-type
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43387
John Crispin [Wed, 26 Nov 2014 08:59:41 +0000 (08:59 +0000)]
kernel: unset CONFIG_ARM_CCN
oldconfig kept asking for that config symbol...
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43386
John Crispin [Wed, 26 Nov 2014 08:59:32 +0000 (08:59 +0000)]
ar71xx: add support for TP-LINK CPE210/220/510/520
This adds support for the TP-LINK CPE210/220/510/520 (Pharos series). These
devices are very similar to the Ubiquiti NanoStations, but with better specs:
faster CPU, more RAM, 2x2 MIMO.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 43385
John Crispin [Wed, 26 Nov 2014 08:59:22 +0000 (08:59 +0000)]
firmware-utils: add new tool tplink-safeloader for the new TP-LINK Pharos devices (CPE210/220/510/520)
The new TP-LINK Pharos series uses a new bootloader, the "TP-LINK Safeloader".
It uses an advanced firmware image format, containing an image partition table
and a flash partition table (and image partitions are mapped to the
corresponding flash partitions). The exact image format is documented in the
source code.
Furthermore, the bootloader expects the kernel image as an ELF executable.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 43384
John Crispin [Wed, 26 Nov 2014 08:59:17 +0000 (08:59 +0000)]
mtd: fix 2 compiler warnings
mtd.c:544:7: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 3 has type ‘ssize_t’ [-Wformat]
mtd.c:602:1: warning: label ‘done’ defined but not used [-Wunused-label]
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43383
Imre Kaloz [Wed, 26 Nov 2014 08:28:22 +0000 (08:28 +0000)]
Netgear R6100 support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 43382
Felix Fietkau [Tue, 25 Nov 2014 20:34:08 +0000 (20:34 +0000)]
uqmi: update to the latest version, also set 802.3 data format via the WDA service
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43381
Jonas Gorski [Tue, 25 Nov 2014 19:07:02 +0000 (19:07 +0000)]
brcm63xx: uci-defaults: network: move DSL-274x1 F1 to right section
The cpu port is at 8, not 5.
Fixes #18406.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 43379
Jonas Gorski [Tue, 25 Nov 2014 19:06:51 +0000 (19:06 +0000)]
brcm63xx: unify dt image generation
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 43378
Jonas Gorski [Tue, 25 Nov 2014 19:06:43 +0000 (19:06 +0000)]
brcm63xx: move rsa signature to additional options
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 43377
Jonas Gorski [Tue, 25 Nov 2014 19:06:38 +0000 (19:06 +0000)]
brcm63xx: fix image generation
This fixes build issues introduced on r43361.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 43376
Imre Kaloz [Mon, 24 Nov 2014 22:09:47 +0000 (22:09 +0000)]
rename overlayfs' symbol
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 43375
John Crispin [Mon, 24 Nov 2014 20:39:48 +0000 (20:39 +0000)]
ralink: fix pci reset patch
sorry, forgot to make target/update before commiting the last patch
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43374
John Crispin [Mon, 24 Nov 2014 19:14:29 +0000 (19:14 +0000)]
procd: fix/clean some conditions in nand.sh
1) nand_upgrade_tar: use a simpler condition that matches if () { }
logic and fix check of $kernel_length variable
2) nand_do_upgrade_stage2: use case, otherwise one could believe we
always call nand_upgrade_tar
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43373
John Crispin [Mon, 24 Nov 2014 19:14:17 +0000 (19:14 +0000)]
procd: document nand.sh a bit
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43372
John Crispin [Mon, 24 Nov 2014 19:12:46 +0000 (19:12 +0000)]
mpc85xx: fix missing dts target for kernel 3.14
With kernel 3.14 dts target p1010rdb was renamed to p1010rdb-pa.
To maintain compatibility define p1010rdb-pa as new standard and
copy p1010rdb.dts to p1010rdb-pa.dts under 3.10.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 43371
John Crispin [Mon, 24 Nov 2014 19:12:35 +0000 (19:12 +0000)]
ralink: add proper reset of pci core
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43370
projects / openwrt / staging / rmilecki.git / log