ASoC: pcm: update FE/BE trigger order based on the command

Currently, the trigger orders SND_SOC_DPCM_TRIGGER_PRE/POST
determine the order in which FE DAI and BE DAI are triggered.
In the case of SND_SOC_DPCM_TRIGGER_PRE, the FE DAI is
triggered before the BE DAI and in the case of
SND_SOC_DPCM_TRIGGER_POST, the BE DAI is triggered before
the FE DAI. And this order remains the same irrespective of the
trigger command.

In the case of the SOF driver, during playback, the FW
expects the BE DAI to be triggered before the FE DAI during
the START trigger. The BE DAI trigger handles the starting of
Link DMA and so it must be started before the FE DAI is started
to prevent xruns during pause/release. This can be addressed
by setting the trigger order for the FE dai link to
SND_SOC_DPCM_TRIGGER_POST. But during the STOP trigger,
the FW expects the FE DAI to be triggered before the BE DAI.
Retaining the same order during the START and STOP commands,
results in FW error as the DAI component in the FW is still
active.

The issue can be fixed by mirroring the trigger order of
FE and BE DAI's during the START and STOP trigger. So, with the
trigger order set to SND_SOC_DPCM_TRIGGER_PRE, the FE DAI will be
trigger first during SNDRV_PCM_TRIGGER_START/STOP/RESUME
and the BE DAI will be triggered first during the
STOP/SUSPEND/PAUSE commands. Conversely, with the trigger order
set to SND_SOC_DPCM_TRIGGER_POST, the BE DAI will be triggered
first during the SNDRV_PCM_TRIGGER_START/STOP/RESUME commands
and the FE DAI will be triggered first during the
SNDRV_PCM_TRIGGER_STOP/SUSPEND/PAUSE commands.

Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191104224812.3393-2-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: boards: sof_rt5682: use dependency on SOF_HDA_LINK

The wrong dependency is used and the build can be broken

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101173045.27099-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: boards: Geminilake is only supported by SOF

Geminilake machine drivers are only tested and recommended with SOF.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101173045.27099-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: boards: fix configs for bxt-da7219-max98057a

The same driver is reused for 3 different configurations, but the
driver will only be build if ApolloLake is selected.

Fix and make sure each device can work without dependencies on others
(useful for minimal configurations).

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101173045.27099-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: boards: remove select SND_HDA_DSP_LOADER

This option is only required with the Skylake platform driver, there
is no reason to have this option in machine drivers. This is
e.g. useless for SOF-based solutions.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101173045.27099-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: Skylake: mark HDAudio codec support as deprecated.

This option famously broke audio on Linus' laptop and the problem have
not been fixed.

Mark as DEPRECATED to avoid any ambiguity with distros.

Use SOF if you need HDaudio support w/ the DSP enabled, e.g. for DMIC
capture.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101173045.27099-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: use def_tristate, avoid using select

So far we used select to use the relevant built-in/module options, but
this led to blurring layers between core and Intel Kconfigs.

Use def_tristate works just as well and removes Intel stuff from the code.

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101173045.27099-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: imx: fix reverse CONFIG_SND_SOC_SOF_OF dependency

updated solution to the problem reported with randconfig:

CONFIG_SND_SOC_SOF_IMX depends on CONFIG_SND_SOC_SOF, but is in
turn referenced by the sof-of-dev driver. This creates a reverse
dependency that manifests in a link error when CONFIG_SND_SOC_SOF_OF
is built-in but CONFIG_SND_SOC_SOF_IMX=m:

sound/soc/sof/sof-of-dev.o:(.data+0x118): undefined reference to `sof_imx8_ops'

use def_trisate to propagate the right settings without select.

Fixes: f4df4e4042b0 ("ASoC: SOF: imx8: Fix COMPILE_TEST error")
Fixes: 202acc565a1f ("ASoC: SOF: imx: Add i.MX8 HW support")
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101173045.27099-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Kconfig: add EXPERT dependency for developer options, clarify help

Some distros select all possible options, despite existing warnings to
be careful. This leads to e.g. user reports that the HDaudio codec and
DMIC are not handled by SOF.

Add an explicit menu item to unlock developer options, and make them
dependent on CONFIG_EXPERT. Hopefully with this double-lock these
options will only be selected by developers.

GitHub issue: https://github.com/thesofproject/sof/issues/1885
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101173045.27099-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: add mutual exclusion between SOF and legacy Baytrail driver

This legacy driver is already deprecated, let's make sure there is no
conflict with SOF.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101173045.27099-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: Broadwell: clarify mutual exclusion with legacy driver

Some distros select all options blindly, which leads to confusion and
bug reports. SOF does not fully support Broadwell due to firmware
dependencies, the machine drivers can only support one option, and
UCM/topology files are still being propagated to downstream distros,
so make SOF on Broadwell an opt-in option that first require distros
to opt-out of existing defaults.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204237
Fixes: f35bf70f61d3 ('ASoC: Intel: Make sure BDW based machine drivers build for SOF')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101173045.27099-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: Baytrail: clarify mutual exclusion with Atom/SST driver

Some distros select all options blindly, which leads to confusion and
bug reports. Since SOF does not support Baytrail-CR for now, and
UCM/topology files are still being propagated to downstream distros,
make SOF on Baytrail an opt-in option that first require distros to
opt-out of existing defaults.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101173045.27099-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: hda: Simplify the hda_dsp_wait_d0i3c_done() function

Remove the retry argument for the hda_dsp_wait_d0i3c_done()
function and use the HDA_DSP_REG_POLL_RETRY_COUNT macro
directly.

Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101170916.26517-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: boards: Add CML m/c using RT1011 and RT5682

Machine driver to enable
RT5682 on SSP0, DMIC, HDMI and
RT1011 AMP on SSP1 with
2 CH / 24 bit TDM Playback over 4 individual codecs and
4 CH / 24 bit Capture to provide feedback.

Signed-off-by: Naveen Manohar <naveen.m@intel.com>
Signed-off-by: Sathya Prakash M R <sathya.prakash.m.r@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101171847.26767-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: Add acpi match for rt1011 based m/c driver

Add match for CML m/c with RT1011 and RT5682

Signed-off-by: Naveen Manohar <naveen.m@intel.com>
Signed-off-by: Sathya Prakash M R <sathya.prakash.m.r@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191101171847.26767-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: ux500: Remove redundant variable "status"

local variable "status" is not used. hence it is safe to remove and
just return 0.

Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Link: https://lore.kernel.org/r/1572528855-25990-1-git-send-email-zhongjiang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt1011: some minor changes to improve readability

There is no other code use the RT1011_INIT_REG_LEN definition,
except rt1011_reg_init().
Hence, we remove it and fix the typo.

Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20191031115446.21108-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt1011: add the range check for temperature_calib from device property

The driver will check the range for temperature_calib.
It should be from 1 to 255.

Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20191031115436.21055-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt1011: remove unnecessary tabs using spaces instead

There are unnecessary tabs inside some statements.
It uses sapces instead.

Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20191031115425.21003-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt1011: improve the rt1011_set_dai_fmt() function

If there is a wrong format setting,
the driver will goto the end of the function directly.

Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20191031115414.20951-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt1011: remove redundant code in kcontrol

The !component->card->instantiated statement should remove in kcontrol.
It is no need to check the card->instantiated in kcontrol.

Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20191031115401.20898-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dt-bindings: rt5682: add button delay device property

The btndet-delay device property could control the HW debounce time.
It is easy to adjust the sensitivity of push button.

Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20191030085556.14351-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt5682: improve the sensitivity of push button

The sensitivity could improve by decreasing the HW debounce time
and reduce the delay time of workequeue.
This patch added a device property for HW debounce time control.
We could change this value to tune the sensitivity of push button.

Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20191030085533.14299-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: soc-core: remove unneeded snd_soc_tplg_component_remove()

snd_soc_tplg_component_remove() is pair of snd_soc_tplg_component_load(),
and it is topology related cleanup function.

The driver which called _load() needs to call _remove() by its responsibility.
Today, skl-pcm and topology are the user, and these are calling both
_load() and _remove().

soc-core doesn't need to call it.
This patch remove it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/8736fbdnwt.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt5677-spi: fixup compile warning

This patch fixup this warning

LINUX/sound/soc/codecs/rt5677-spi.c: In function ‘rt5677_spi_pcm_close’:
LINUX/sound/soc/codecs/rt5677-spi.c:114:30: warning: unused variable ‘rtd’ [-Wunused-variable]
  struct snd_soc_pcm_runtime *rtd = substream->private_data;
                              ^~~

Fixes: a0e0d135427c ("ASoC: rt5677: Add a PCM device for streaming hotword via SPI")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a79idajh.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: bxt_rt298: common hdmi codec support

Add support for using snd-hda-codec-hdmi driver for HDMI/DP
instead of ASoC hdac-hdmi. This is aligned with how other
HDA codecs are already handled.

Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191029134017.18901-10-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: intel: sof_rt5682: common hdmi codec support

Add support for using snd-hda-codec-hdmi driver for HDMI/DP
instead of ASoC hdac-hdmi. This is aligned with how other
HDA codecs are already handled.

Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191029134017.18901-9-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: glk_rt5682_max98357a: common hdmi codec support

Add support for using snd-hda-codec-hdmi driver for HDMI/DP
instead of ASoC hdac-hdmi. This is aligned with how other
HDA codecs are already handled.

Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191029134017.18901-8-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: bxt-da7219-max98357a: common hdmi codec support

Add support for using snd-hda-codec-hdmi driver for HDMI/DP
instead of ASoC hdac-hdmi. This is aligned with how other
HDA codecs are already handled.

Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191029134017.18901-7-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: add support for snd-hda-codec-hdmi

Add support to implement HDMI/DP audio by using the common
snd-hda-codec-hdmi driver.

Change of codec driver affects user-space as the two
drivers expose different mixer controls. A new kernel
module option "use_common_hdmi" is added to user-space
to indicate which interface should be used. The default
driver can be selected via a Kconfig option.

Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191029134017.18901-6-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: skl-hda-dsp-generic: fix include guard name

Match the include guard define to actual filename. The source
directory now has an actual hda_dsp_common.h header, so the old
include guard may cause confusion.

Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191029134017.18901-5-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: skl-hda-dsp-generic: use snd-hda-codec-hdmi

Add support for using snd-hda-codec-hdmi driver for HDMI/DP
instead of ASoC hdac-hdmi. This is aligned with how other
HDA codecs are already handled.

When snd-hda-codec-hdmi is used, the PCM device numbers are
parsed from card topology and passed to the codec driver.
This needs to be done at runtime as topology changes may
affect PCM device allocation.

Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191029134017.18901-4-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: hdac_hda: add support for HDMI/DP as a HDA codec

Handle all HDA codecs using same logic, including HDMI/DP.

Call to snd_hda_codec_build_controls() is delayed for HDMI/DP HDA
devices. This is needed to discover the PCM device numbers as
defined in topology.

Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191029134017.18901-3-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ALSA: hda/hdmi - implement mst_no_extra_pcms flag

To support the DP-MST multiple streams via single connector feature,
the HDMI driver was extended with the concept of backup PCMs. See
commit 9152085defb6 ("ALSA: hda - add DP MST audio support").

This implementation works fine with snd_hda_intel.c as PCM topology
is fully managed within the single driver.

When the HDA codec driver is used from ASoC components, the concept
of backup PCMs no longer fits. For ASoC topologies, the physical
HDMI converters are presented as backend DAIs and these should match
with hardware capabilities. The ASoC topology may define arbitrary
PCMs (i.e. frontend DAIs) and have processing elements before eventual
routing to the HDMI BE DAIs. With backup PCMs, the link between
FE and BE DAIs would become dynamic and change when monitors are
(un)plugged. This would lead to modifying the topology every time
hotplug events happen, which is not currently possible in ASoC and
there does not seem to be any obvious benefits from this design.

To overcome above problems and enable the HDMI driver to be used
from ASoC, this patch adds a new mode (mst_no_extra_pcms flags) to
patch_hdmi.c. In this mode, the codec driver does not assume
the backup PCMs to be created.

Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191029134017.18901-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rockchip_max98090: Add HDMI jack support

In machine driver, create a jack and let hdmi-codec report jack status.

Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Link: https://lore.kernel.org/r/20191028071930.145899-5-cychiang@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rockchip_max98090: Optionally support HDMI use case

Support three different use cases with rockchip_max98090 driver.

The three use cases:
- max98090 only: Current usage, where HDMI link is missing.
- HDMI only: Needed use case for veyron_mickey board.
- max98090 + HDMI: Ideal use case for veyron_jerry, veyron_minnie..etc.

The presence of max98090 is determined by the presence of
rockchip,audio-codec device property.

The presence of HDMI is determined by the presence of
rockchip,hdmi-codec device property.

Create different sound card based on the configuration.
Note that we keep max98090 only usage for backward compatibility.

Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Link: https://lore.kernel.org/r/20191028071930.145899-4-cychiang@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rockchip-max98090: Support usage with and without HDMI

Add one optional property "rockchip,hdmi-codec" to let user specify HDMI
device node in DTS so machine driver can find hdmi-codec device node for
HDMI codec DAI.

Use the presence of rockchip,audio-codec and rockchip,hdmi-codec to
specify the use case.

Use max98090 only : specify rockchip,audio-codec.
Use HDMI only: specify rockchip,hdmi-codec.
Use both max98090 and HDMI: specify rockchip,audio-codec and
rockchip,hdmi-codec.

Move these properties to optional because they are not needed for
HDMI-only use case.
"rockchip,audio-codec": The phandle of the MAX98090 audio codec
"rockchip,headset-codec": The phandle of Ext chip for jack detection

Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Link: https://lore.kernel.org/r/20191028071930.145899-3-cychiang@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>

drm: bridge: dw-hdmi: Report connector status using callback

Allow codec driver register callback function for plug event.

The callback registration flow:
dw-hdmi <--- hw-hdmi-i2s-audio <--- hdmi-codec

dw-hdmi-i2s-audio implements hook_plugged_cb op
so codec driver can register the callback.

dw-hdmi exports a function dw_hdmi_set_plugged_cb so platform device
can register the callback.

When connector plug/unplug event happens, report this event using the
callback.

Make sure that audio and drm are using the single source of truth for
connector status.

Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Link: https://lore.kernel.org/r/20191028071930.145899-2-cychiang@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF - remove the dead code (skylake/kabylake)

Appearently the CONFIG_SND_SOC_SOF_KABYLAKE and CONFIG_SND_SOC_SOF_SKYLAKE
options are not present in Kconfig and 'struct snd_sof_dsp_ops sof_skl_ops'
is not declared in the code, too.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20191028173329.29538-1-perex@perex.cz
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: intel - fix the card names

Those strings are exposed to the user space as the
card name thus used in the GUIs. The common
standard is to avoid '_' here. The worst case
is 'sof-skl_hda_card' string.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Mark Brown <broonie@kernel.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191028164624.14334-1-perex@perex.cz
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: pci: Add prepare/complete PM callbacks

Use the new implemented snd_sof_prepare() and snd_sof_complete() as the
power management callbacks for pci probing platforms.

Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-27-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: PM: Add support for DSP D0i3 state when entering S0ix

When system is entering into S0ix, the PCI device may transition to the
D0i3 substate instead of D3. In D0i3, some always-on functionality can
be enabled, such as acoustic event detection, voice activity detection
or hotwording. When an event is detected, the DSP firmware can wake-up
the device for a transition to D0 with an interrupt.

Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-26-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: return -ENOTSUPP if D0I3 is not supported

No set_power_state ops means that the platform doesn't support D0i3,
return -ENOTSUPP for the case.

Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-25-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: hda-dsp: implement suspend/resume for S0ix<->S0 transition

Enable system wake up via IPC interrupt from DSP when the system is
suspending to the S0ix state, and disable it in the corresponding
resuming.

Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-24-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: ignore suspend/resume for D0ix compatible streams

During system suspend, the PM framework will freeze all applications and
the ALSA/ASoC core will suspend all RUNNING PCM streams.

However, D0ix-compatible PCM streams should keep the related pipelines
active in the DSP when the system is entering S0ix. The TRIGGER_SUSPEND
event is trapped in such cases to prevent the pipelines from being
stopped. Likewise, the TRIGGER_RESUME/START events should not affect the
pipeline state.

The SOF driver also triggers some DSP Firmware pipelines based on the
DAPM widgets power events. In such cases, we also ignore PRE_PMU and
POST_PMD events to keep the pipelines active.

Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-23-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: PM: implement prepare/complete callbacks

Implement the prepare() and complete() callbacks for power management,
initialize s0_suspend flag at prepare(), and reset it at complete().

Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-22-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: add a flag suspend_ignored for sof stream

Add a suspend_ignored flag to snd_sof_pcm_stream that will be used to
decide if the corresponding FW pipeline should be kept active to perform
always on tasks when the system is entering the S0ix state.

Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-21-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: add a flag to indicate the system suspend target

Add flag 's0_suspend' to indicate if the system is entering S0ix or
not.

Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-20-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: CNL: add support for sending compact IPC

For compact IPCs, we will send the IPC header/command via the HIPCIDR
register and the first 32bit payload via the HIPCIDD register, no
mailbox will be used.

Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-19-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: PM: add helpers for setting D0 substate for ADSP

Add snd_sof_set_d0_substate() helper for setting ADSP to a specific D0
substate, it will call into the platform specific implementation, and
update the d0_substate at success.

Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-18-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: configure D0ix IPC flags in set_power_state

The configuration for D0ix in FW is platform specific, let's do this and
send IPC in the platform set_power_state() ops.

Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-17-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: HDA: add cAVS specific compact IPC header file

On cAVS platforms, some IPCs are required to be sent via IPC registers
only(e.g. when in D0i3, mailbox is unaccessible), add hda-ipc.h to hold
definition of those compact IPCs.

Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: hda-ipc: Don't read mailbox for PM_GATE reply

Memory windows could be powered off before receiving PM_GATE IPC reply
from FW, we can't read the mailbox to get reply.

Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: ipc: introduce message for DSP power gating

Add new ipc messages which will be sent from driver to FW, to ask FW to
enter specific power saving state.

Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: PM: rename sof_send_pm_ipc to sof_send_pm_ctx_ipc

The helper sof_send_pm_ipc() is only suitable for context save/restore
IPCs' sending, so rename it to sof_send_pm_ctx_ipc here.

Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: HDA: use macro for register polling retry count

Define macro and use it for the register polling retry count.

Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: hda-dsp: align the comments for D0I3C update

Align the logs for CIP timeout at D0I3C.I3 updating.

Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: topology: parse and store d0i3_compatible flag

Parses the token from tplg file and store it to snd_sof_pcm_stream
d0i3_compatible flag, which can be used later for d0ix transition
management.

Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: token: add tokens for PCM compatible with D0i3 substate

Add stream token SOF_TKN_STREAM_PLAYBACK_COMPATIBLE_D0I3 and
SOF_TKN_STREAM_CAPTURE_COMPATIBLE_D0I3 to denote if the stream can be
opened at low power d0i3 status or not.

Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: add flag to snd_sof_pcm_stream for D0i3 compatible stream

Add flag d0i3_compatible to struct snd_sof_pcm_stream to denote if the
stream can tolerate a transition to the D0i3 substate while opened (thus
seen as 'active' by pm_runtime).

Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: APL: add set_power_state() ops

Using hda_dsp_set_power_state() as set_power_state() ops for apl to do
d0ix platform configuration updates.

Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: CNL: add set_power_state() ops

Using hda_dsp_set_power_state() as set_power_state() ops for cnl to do
d0ix platform configuration updates.

Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: hda-dsp: Add helper for setting DSP D0ix substate

Adding helper to implement setting dsp to d0i3 or d0i0 status, this will
be needed for driver D0ix support.

Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: add set_power_state() to dsp_ops for power state update

D0i3 is a platform-defined substate of D0, so we need a
platform-specific callback in dsp_ops to handle the relevant
configurations.

Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: reset default d0_substate at probe() and resume()

We initialize/reset d0_substate to default d0i0 value when doing
transition D3-->D0, e.g. at success of probing and resuming.

Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: add a field to store the current D0 substate of DSP

Add field d0_substate to struct snd_sof_dev to store the current DSP
D0 sub-state(only meaningful when DSP in D0), which could be D0I0 or
D0I3.

Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rsnd: core.c: add WARN_ON() on rsnd_channel_normalization()

chan > 8 or chan < 0 shouldn't happen.
This patch uses WARN_ON() for such case.

Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87y2x530a4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: fsl_esai: Add spin lock to protect reset, stop and start

xrun may happen at the end of stream, the
trigger->fsl_esai_trigger_stop maybe called in the middle of
fsl_esai_hw_reset, this may cause esai in wrong state
after stop, and there may be endless xrun interrupt.

This issue may also happen with trigger->fsl_esai_trigger_start.

So Add spin lock to lock those functions.

Fixes: 7ccafa2b3879 ("ASoC: fsl_esai: recover the channel swap after xrun")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/52e92c4221a83e39a84a6cd92fc3d5479b44894c.1572252321.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: fsl_asrc: refine the setting of internal clock divider

The output divider should align with the output sample
rate, if use ideal sample rate, there will be a lot of overload,
which would cause underrun.

The maximum divider of asrc clock is 1024, but there is no
judgement for this limitation in driver, which may cause the divider
setting not correct.

For non-ideal ratio mode, the clock rate should divide the sample
rate with no remainder, and the quotient should be less than 1024.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/23c634e4bf58afce5b3ae67f5f42e8d1cae2639a.1572252307.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: eve: implement set_bias_level function for rt5514

The first DMIC capture always fail (zero sequence data from PCM port)
after using DSP hotwording function (i.e. Google assistant).

This rt5514 codec requires to control mclk directly in the set_bias_level
function. Implement this function in machine driver to control the
ssp1_mclk clock explicitly could fix this issue.

Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/1571994691-20199-1-git-send-email-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: sunxi: sun4i-codec: remove unneeded semicolon

remove unneeded semicolon.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20191025120801.16236-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: fsl: fsl_dma: fix build failure

Commit 4ac85de9977e ("ASoC: fsl: fsl_dma: remove snd_pcm_ops") removed
fsl_dma_ops but left a usage, leading to a build error for some
configs, eg. mpc85xx_defconfig:

  sound/soc/fsl/fsl_dma.c: In function ‘fsl_soc_dma_probe’:
  sound/soc/fsl/fsl_dma.c:905:18: error: ‘fsl_dma_ops’ undeclared (first use in this function)
    dma->dai.ops = &fsl_dma_ops;
                    ^~~~~~~~~~~

Remove the usage to fix the build.

Fixes: 4ac85de9977e ("ASoC: fsl: fsl_dma: remove snd_pcm_ops")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191025051353.2878-1-mpe@ellerman.id.au
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: only support INFO_BATCH for legacy platforms

The current position update is not precise enough for PulseAudio to
work reliably with the timer-based scheduling on Baytrail,
Cherrytrail, Broadwell.

Disable the NO_PERIOD_WAKEUP capability and use BATCH to signal that
the position is only reliable and updated during period_elapsed
events.

This will be reverted when the firmware provides a more accurate
position for those platforms.

Reviewed-by: Jaska Uimonen <jaska.uimonen@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191024210318.30068-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: define INFO_ flags in dsp_ops

Currently the INFO_ flags such as PAUSE/NO_PERIOD_WAKEUP are defined
in the SOF PCM core, which doesn't scale. To account for platform
variations, these flags need to be set in DSP ops.

This patch only moves the definitions and does not change any
functionality.

Reviewed-by: Jaska Uimonen <jaska.uimonen@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191024210318.30068-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: tegra: disable rx_fifo after disable stream

We see odd FIFO overruns with this, we assume the best thing to do is
to disable the RX I2S frontend first, and then disable the FIFO that
is using it.

This also fixes an issue where using multi-word frames (TDM) have
partial samples stuck in the FIFO which then get read out when the
next capture is started.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20191018154833.7560-5-ben.dooks@codethink.co.uk
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: tegra: add a TDM configuration callback

Add a callback to configure TDM settings for the Tegra30 I2S ASoC 'platform'
driver.

Signed-off-by: Edward Cragg <edward.cragg@codethink.co.uk>
[ben.dooks@codethink.co.uk: merge fix for power management]
[ben.dooks@codethink.co.uk: add review change for fsync of 1 clock]
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20191018154833.7560-2-ben.dooks@codethink.co.uk
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: pxa: poodle: Spelling s/enpoints/endpoints/, s/connetion/connection/

Fix misspelling of "endpoints" and "connection".

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20191024153130.31082-1-geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Spelling s/configr/configur/

Fix misspellings of "configuration" and "configure".

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20191024151603.29043-1-geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: soc-dpcm: tidyup for_each_dpcm_xx() macro

for_each_dpcm_xx() macro is using "dpcm" as parameter (1),
but, it is also struct member (2).

#define for_each_dpcm_fe(be, stream, dpcm) \
list_for_each_entry(dpcm, &(be)->dpcm[stream]...)
                    ^^^^(1)      ^^^^(2)

Thus, it will be compile error if user not used "dpcm" as parameter

for_each_dpcm_fe(be, stream, dp)
                             ^^
This patch fixup it.

Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87tv7x7idx.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: tegra: Allow 24bit and 32bit samples

The tegra3 audio can support 24 and 32 bit sample sizes so add the
option to the tegra30_i2s_hw_params to configure the S24_LE or S32_LE
formats when requested.

Signed-off-by: Edward Cragg <edward.cragg@codethink.co.uk>
[ben.dooks@codethink.co.uk: fixup merge of 24 and 32bit]
[ben.dooks@codethink.co.uk: add pm calls around ytdm config]
[ben.dooks@codethink.co.uk: drop debug printing to dev_dbg]
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20191018154833.7560-3-ben.dooks@codethink.co.uk
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt5677-spi: fix sparse warnings

Fix bugs reported by kbuild test robot

Fixes: a0e0d135427c ("ASoC: rt5677: Add a PCM device for streaming hotword via SPI")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20191024184026.183913-1-cujomalainey@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt5677: Add missing null check for failed allocation of rt5677_dsp

The allocation of rt5677_dsp can potentially fail and return null, so add
a null check and return -ENOMEM on a memory allocation failure.

Addresses-Coverity: ("Dereference null return")
Fixes: a0e0d135427c ("ASoC: rt5677: Add a PCM device for streaming hotword via SPI")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20191024124610.18182-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt5650: Add Kahlee platform specfic changes

Add platform specific data for Kahlee project.

Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Signed-off-by: Shirish S <shirish.s@amd.com>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20191023212948.92246-1-cujomalainey@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: kirkwood: fix IRQ error handling

Propagate the error code from request_irq(), rather than returning
-EBUSY.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1iNIqh-0000tW-EZ@rmk-PC.armlinux.org.uk
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: initial support to JasperLake.

Add Kconfig, PCI ID and chip info for JSL platform.
The DSP only has 2 cores for this platform.

Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191022194705.23347-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: common: add ACPI matching tables for JSL

There are no upstream machine drivers just yet so just add dummy table
for compilation in nocodec-mode.

Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Link: https://lore.kernel.org/r/20191022194705.23347-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: hda: add dev_err() traces for snd_sof_dsp_read_poll_timeout()

Such traces should be extremely rare but extremely useful for debug.

Report errors for all calls to sdn_sof_dsp_read_poll_timeout(), but
only on negative values for consistency.

Add traces that enable each timeout to be uniquely identified.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191022192844.21022-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: hda-loader: improve error handling

If a ROM timeout is detected, we still stop the DMA but will return
the initial error should the DMA stop also fail.

Likewise the cleanup is handled regardless of the status, but we
return the initial error.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191022192844.21022-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: mediatek: Check SND_SOC_CROS_EC_CODEC dependency

If SND_SOC_MT8183_MT6358_TS3A227E_MAX98357A=y,
below errors can be seen:
sound/soc/codecs/cros_ec_codec.o: In function `send_ec_host_command':
cros_ec_codec.c:(.text+0x534): undefined reference to `cros_ec_cmd_xfer_status'
cros_ec_codec.c:(.text+0x101c): undefined reference to `cros_ec_get_host_event'

This is because it will select SND_SOC_CROS_EC_CODEC
after commit 2cc3cd5fdc8b ("ASoC: mediatek: mt8183: support WoV"),
but SND_SOC_CROS_EC_CODEC depends on CROS_EC.

Fixes: 2cc3cd5fdc8b ("ASoC: mediatek: mt8183: support WoV")
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Link: https://lore.kernel.org/r/20191023063103.44941-1-maowenan@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rsnd: add missing of_node_put()

This patch adds missing of_node_put() for
rsnd_parse_tdm_split_mode()
rsnd_parse_connect_graph()

Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/8736fkyzx8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rsnd: dma: set bus width to data width for monaural data

According to R-Car3 HW manual 40.3.3 (Data Format on Audio Local Bus),
in case of monaural data writing or reading through Audio-DMAC,
it's always in Left Justified format, so both src and dst
DMA Bus width should be equal to physical data width.

Therefore set src and dst's DMA bus width to:
 - [monaural case] data width
 - [non-monaural case] 32bits (as prior applying the patch)

Cc: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Cc: Timo Wischer <twischer@de.adit-jv.com>
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Link: https://lore.kernel.org/r/20191022185518.12838-1-erosca@de.adit-jv.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: soc-core: add for_each_rtd_components() and replace

ALSA SoC has for_each_rtdcom() which is link list for
rtd-component which is called as rtdcom. The relationship image is like below

       rtdcom    rtdcom      rtdcom
       component   component   component
rtd->component_list -> list -> list     -> list ...

Here, the pointer get via normal link list is rtdcom,
Thus, current for_each loop is like below, and need to get
component via rtdcom->component

for_each_rtdcom(rtd, rtdcom) {
component = rtdcom->component;
...
}

but usually, user want to get pointer from for_each_xxx is component
directly, like below.

for_each_rtd_component(rtd, rtdcom, component) {
...
}

This patch expands list_for_each_entry manually, and enable to get
component directly from for_each macro.
Because of it, the macro becoming difficult to read,
but macro itself becoming useful.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/878spm64m4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: soc-core: snd_soc_unbind_card() cleanup

soc_remove_link_components() will be called from
soc_cleanup_card_resources(). This patch removes duplicate call.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/877e5664lz.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: soc-core: remove for_each_rtdcom_safe()

There is no user of for_each_rtdcom().
Let's remove it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a7a264m9.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: soc-pcm: fixup dpcm_prune_paths() loop continue

dpcm_prune_paths() is checking widget at 2 parts.
(A) is for CPU, (B) is for Codec.
If we focus to (A) part, continue at (a) is for (1) loop. But,
if we focus to (B) part, continue at (b) is for (2) loop, not for (1).
This is bug.
This patch fixup this issue.

static int dpcm_prune_paths(...)
{
...
   (1) for_each_dpcm_be(fe, stream, dpcm) {
...

 ^ widget = dai_get_widget(...);
 |
(A) if (widget && widget_in_list(...))
 | (a) continue;
 v
 ^ (2) for_each_rtd_codec_dai(...) {
 | widget = dai_get_widget(...);
(B)
 | if (widget && widget_in_list(...))
 v (b) continue;
}
...

Fixes: 2e5894d73789 ("ASoC: pcm: Add support for DAI multicodec")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87blui64mf.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt5677: Add a PCM device for streaming hotword via SPI

This patch implements a PCM interface for streaming hotword
phrases over SPI. Userspace can open the PCM device at anytime.
The stream is blocked when no hotword is detected. The mic
audio buffer on the DSP is a ~128KByte ring buffer that holds
~4sec of audio samples recorded from the DMIC (S16_LE, mono,
16KHz). After a hotword is detected, previous 2 seconds of audio
(containing the detected hotword) is streamed first, then live
capture continues until userspace closes the PCM stream.

When transferring, copy one period at a time then call
snd_pcm_period_elapsed(). This reduces the latency of transferring
the initial ~2sec of audio after hotword detect since audio samples
are available for userspace earlier.

Signed-off-by: Ben Zhang <benzh@chromium.org>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20191018200449.141123-2-cujomalainey@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASOC: adau7118: Change regulators id

Change the regulators id in accordance with b670e44fc3bd.

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20191021140816.262401-3-nuno.sa@analog.com
Signed-off-by: Mark Brown <broonie@kernel.org>

dt-bindings: asoc: adau7118: Cleanup

This changes are in accordance with the review done to this bindings.
This is a follow-up patch to 969d49b2cdc8.

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20191021140816.262401-2-nuno.sa@analog.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: mediatek: mt8183: support WoV

Add DAI link and pin muxing for wake on voice.

Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20191019143504.4.Ibf012d0cd8679d846213606dc5f426aea1ff590a@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dt-bindings: mt8183: add ec-codec

Add an optional property "ec-codec".  If specified, mt8183 could use the
"wake on voice" feature offered by EC codec.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20191019143504.3.Iec97a3f137148cdf316056612590b3e0b302f5f3@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>