openwrt/staging/blogic.git
17 years agoPCI: ATI sb600 sata quirk
Conke Hu [Tue, 19 Dec 2006 21:11:37 +0000 (13:11 -0800)]
PCI: ATI sb600 sata quirk

Acked-by: Jeff Garzik <jeff@garzik.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoPCI legacy resource fix
Ralf Baechle [Tue, 19 Dec 2006 21:12:08 +0000 (13:12 -0800)]
PCI legacy resource fix

Since commit 368c73d4f689dae0807d0a2aa74c61fd2b9b075f the kernel will try
to update the non-writeable BAR registers 0..3 of PIIX4 IDE adapters if
pci_assign_unassigned_resources() is used to do full resource assignment of
the bus.  This fails because in the PIIX4 these BAR registers have
implicitly assumed values and read back as zero; it used to work because
the kernel used to just write zero to that register the read back value did
match what was written.

The fix is a new resource flag IORESOURCE_PCI_FIXED used to mark a resource
as non-movable.  This will also be useful to keep other import system
resources from being moved around - for example system consoles on PCI
busses.

[akpm@osdl.org: cleanup]
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoPCI: don't export device IDs to userspace
Adrian Bunk [Tue, 19 Dec 2006 21:12:07 +0000 (13:12 -0800)]
PCI: don't export device IDs to userspace

I don't see any good reason for exporting device IDs to userspace.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoPCI: Be a bit defensive in quirk_nvidia_ck804() so we don't risk dereferencing a...
Jesper Juhl [Mon, 4 Dec 2006 23:14:48 +0000 (15:14 -0800)]
PCI: Be a bit defensive in quirk_nvidia_ck804() so we don't risk dereferencing a NULL pdev.

pci_get_slot() may return NULL if nothing was found.  quirk_nvidia_ck804()
does not check the value returned from pci_get_slot(), so it may end up
causing a NULL pointer deref.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoPCI: Fix multiple problems with VIA hardware
Alan Cox [Mon, 4 Dec 2006 23:14:45 +0000 (15:14 -0800)]
PCI: Fix multiple problems with VIA hardware

This patch is designed to fix:
- Disk eating corruptor on KT7 after resume from RAM
- VIA IRQ handling
- VIA fixups for bus lockups after resume from RAM

The core of this is to add a table of resume fixups run at resume time.
We need to do this for a variety of boards and features, but particularly
we need to do this to get various critical VIA fixups done on resume.

The second part of the problem is to handle VIA IRQ number rules which
are a bit odd and need special handling for PIC interrupts. Various
patches broke various boxes and while this one may not be perfect
(hopefully it is) it ensures the workaround is applied to the right
devices only.

From: Jean Delvare <khali@linux-fr.org>

Now that PCI quirks are replayed on software resume, we can safely
re-enable the Asus SMBus unhiding quirk even when software suspend support
is enabled.

[akpm@osdl.org: fix const warning]
Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoPCI: Only check the HT capability bits in mpic.c
Michael Ellerman [Wed, 22 Nov 2006 07:26:22 +0000 (18:26 +1100)]
PCI: Only check the HT capability bits in mpic.c

Only compare the exact HT capability bits against HT_CAPTYPE_IRQ,
this is a little paranoid, but doesn't hurt.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoPCI: Use pci_find_ht_capability() in drivers/pci/quirks.c
Michael Ellerman [Wed, 22 Nov 2006 07:26:21 +0000 (18:26 +1100)]
PCI: Use pci_find_ht_capability() in drivers/pci/quirks.c

Use pci_find_ht_capability() in drivers/pci/quirks.c.

I'm pretty sure the logic is unchanged here, but someone please eye-ball it
for me. I've changed the message to be a little shorter, it's now:

PCI: Found (enabled|disabled) HT MSI mapping on xxxx:xx:xx.x

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoPCI: Add #defines for Hypertransport MSI fields
Michael Ellerman [Wed, 22 Nov 2006 07:26:20 +0000 (18:26 +1100)]
PCI: Add #defines for Hypertransport MSI fields

Add a few #defines for grabbing and working with the address fields
in a HT_CAPTYPE_MSI_MAPPING capability. All from the HT spec v3.00.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoPCI: Use pci_find_ht_capability() in drivers/pci/htirq.c
Michael Ellerman [Wed, 22 Nov 2006 07:26:19 +0000 (18:26 +1100)]
PCI: Use pci_find_ht_capability() in drivers/pci/htirq.c

Use pci_find_ht_capability() in drivers/pci/htirq.c

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoPCI: Add pci_find_ht_capability() for finding Hypertransport capabilities
Michael Ellerman [Wed, 22 Nov 2006 07:26:18 +0000 (18:26 +1100)]
PCI: Add pci_find_ht_capability() for finding Hypertransport capabilities

There are already several places in the kernel that want to search a PCI
device for a given Hypertransport capability. Although this is possible
using pci_find_capability() etc., it makes sense to encapsulate that
logic in a helper - pci_find_ht_capability().

To cater for searching exhaustively for a capability, we also provide
pci_find_next_ht_capability().

We also need to cater for the fact that the HT capability fields may be
either 3 or 5 bits wide. pci_find_ht_capability() deals with this for you,
but callers using the #defines directly must handle that themselves.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoPCI: Create __pci_bus_find_cap_start() from __pci_bus_find_cap()
Michael Ellerman [Wed, 22 Nov 2006 07:26:16 +0000 (18:26 +1100)]
PCI: Create __pci_bus_find_cap_start() from __pci_bus_find_cap()

The current implementation of __pci_bus_find_cap() does two things,
first it determines the start of the capability chain for the device,
and then it trys to find the requested capability.

Split these out, so that we can use the two parts independantly in
a subsequent patch. Externally visible behaviour should be unchanged.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agopci: Introduce pci_find_present
Alan Cox [Mon, 4 Dec 2006 23:14:44 +0000 (15:14 -0800)]
pci: Introduce pci_find_present

This works like pci_dev_present but instead of returning boolean returns
the matching pci_device_id entry.  This makes it much more useful.  Code
bloat is basically nil as the old boolean function is rewritten in terms of
the new one.

This will be used by the updated VIA PCI quirks for one

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoPCI: pcieport-driver: remove invalid warning message
Kenji Kaneshige [Wed, 6 Dec 2006 13:07:30 +0000 (22:07 +0900)]
PCI: pcieport-driver: remove invalid warning message

The following warning message should not be displayed for devices
which don't use an interrupt pin.

    pcie_portdrv_probe->Dev[XXXX:XXXX] has invalid IRQ. Check vendor BIOS

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agorpaphp: compiler warning cleanup
Linas Vepstas [Sat, 2 Dec 2006 00:31:27 +0000 (16:31 -0800)]
rpaphp: compiler warning cleanup

This janitorial patch removes the following annoying
compile-time message:

drivers/pci/hotplug/rpaphp_slot.c:57: warning: ignoring return
value of sfs_create_file declared with attribute warn_unused_result

It also fixes a typo, removes some misc crud.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Cc: John Rose <johnrose@us.ibm.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoPCI quirks: remove redundant check
David Rientjes [Sun, 3 Dec 2006 19:55:34 +0000 (11:55 -0800)]
PCI quirks: remove redundant check

Removes redundant check for dev->subordinate; if it is NULL, the function
returns before the patch-affected code region.

Signed-off-by: David Rientjes <rientjes@cs.washington.edu>
Acked-by: Brice Goglin <brice@myri.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agopci: add class codes for Wireless RF controllers
Inaky Perez-Gonzalez [Thu, 30 Nov 2006 23:58:58 +0000 (15:58 -0800)]
pci: add class codes for Wireless RF controllers

pci: add class codes for Wireless RF controllers

Add PCI codes to include/linux/pci_ids.h for RF controllers; first
batch of these devices seem to be the Ultra-Wide-Band and Wireless USB
controllers (WHCI spec).

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoPCI: use /sys/bus/pci/drivers/<driver>/new_id first
Russell King [Wed, 29 Nov 2006 21:18:04 +0000 (21:18 +0000)]
PCI: use /sys/bus/pci/drivers/<driver>/new_id first

Unfortunately, the .../new_id feature does not work with the 8250_pci
driver.

The reason for this comes down to the way .../new_id is implemented.
When PCI tries to match a driver to a device, it checks the modules
static device ID tables _before_ checking the dynamic new_id tables.

When a driver is capable of matching by ID, and falls back to matching
by class (as 8250_pci does), this makes it absolutely impossible to
specify a board by ID, and as such the correct driver_data value to
use with it.

Let's say you have a serial board with vendor 0x1234 and device 0x5678.
It's class is set to PCI_CLASS_COMMUNICATION_SERIAL.

On boot, this card is matched to the 8250_pci driver, which tries to
probe it because it matched using the class entry.  The driver finds
that it is unable to automatically detect the correct settings to use,
so it returns -ENODEV.

You know that the information the driver needs is to match this card
using a device_data value of '7'.  So you echo 1234 5678 0 0 0 0 7
into new_id.

The kernel attempts to re-bind 8250_pci to this device.  However,
because it scans the PCI driver tables, it _again_ matches the class
entry which has the wrong device_data.  It fails.

End of story.  You can't support the card without rebuilding the
kernel (or writing a specific PCI probe module to support it.)

So, can we make new_id override the driver-internal PCI ID tables?
IOW, like this:

From: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Linus Torvalds [Tue, 19 Dec 2006 18:32:40 +0000 (10:32 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/hid

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  [PATCH] Generic HID layer - update MAINTAINERS
  input/hid: Supporting more keys from the HUT Consumer Page
  [PATCH] Generic HID layer - build: USB_HID should select HID

17 years ago[CONNECTOR]: Replace delayed work with usual work queue.
Evgeniy Polyakov [Mon, 18 Dec 2006 09:53:58 +0000 (01:53 -0800)]
[CONNECTOR]: Replace delayed work with usual work queue.

Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[IPV4]: Fix BUG of ip_rt_send_redirect()
Li Yewang [Mon, 18 Dec 2006 08:26:35 +0000 (00:26 -0800)]
[IPV4]: Fix BUG of ip_rt_send_redirect()

Fix the redirect packet of the router if the jiffies wraparound.

Signed-off-by: Li Yewang <lyw@nanjing-fnst.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[TCP]: Trivial fix to message in tcp_v4_inbound_md5_hash
Leigh Brown [Mon, 18 Dec 2006 01:13:10 +0000 (17:13 -0800)]
[TCP]: Trivial fix to message in tcp_v4_inbound_md5_hash

The message logged in tcp_v4_inbound_md5_hash when the hash was expected
but not found was reversed.

Signed-off-by: Leigh Brown <leigh@solinno.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[TCP]: Fix oops caused by tcp_v4_md5_do_del
Leigh Brown [Mon, 18 Dec 2006 01:12:30 +0000 (17:12 -0800)]
[TCP]: Fix oops caused by tcp_v4_md5_do_del

md5sig_info.alloced4 must be set to zero when freeing keys4, otherwise
it will not be alloc'd again when another key is added to the same
socket by tcp_v4_md5_do_add.

Signed-off-by: Leigh Brown <leigh@solinno.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[CONNECTOR]: Fix compilation breakage introduced recently.
Evgeniy Polyakov [Mon, 18 Dec 2006 01:09:41 +0000 (17:09 -0800)]
[CONNECTOR]: Fix compilation breakage introduced recently.

Linus has changed work queue structure and has not tested it with
connector compiled in, his changes break the build.

Attached patch fixes compilation error.

Patch is against commit 99f5e9718185f07458ae70c2282c2153a2256c91.

Thanks to Toralf Förster for pointing this out.

Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[TG3]: Update version and reldate.
Michael Chan [Mon, 18 Dec 2006 01:08:30 +0000 (17:08 -0800)]
[TG3]: Update version and reldate.

Update version to 3.71.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[TG3]: Power down/up 5906 PHY correctly.
Michael Chan [Mon, 18 Dec 2006 01:08:07 +0000 (17:08 -0800)]
[TG3]: Power down/up 5906 PHY correctly.

The 5906 PHY requires a special register bit to power down and up the
PHY.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[TG3]: Fix race condition when calling register_netdev().
Michael Chan [Mon, 18 Dec 2006 01:07:29 +0000 (17:07 -0800)]
[TG3]: Fix race condition when calling register_netdev().

Hot-plug scripts can call tg3_open() as soon as register_netdev() is
called in tg3_init_one().  We need to call pci_set_drvdata() before
register_netdev(), and netif_carrier_off() needs to be moved to
tg3_open() to avoid race conditions.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[TG3]: Assign tp->link_config.orig_* values.
Michael Chan [Mon, 18 Dec 2006 01:06:46 +0000 (17:06 -0800)]
[TG3]: Assign tp->link_config.orig_* values.

tp->link_config.orig_* values must be assigned during
tg3_set_settings() because these values will be used to setup the
link speed during tg3_open().  Without these assignments, the link
speed settings will be all messed by if tg3_set_settings() is called
when the device is down.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[NETFILTER] IPV6: Fix dependencies.
David S. Miller [Sun, 17 Dec 2006 22:37:23 +0000 (14:37 -0800)]
[NETFILTER] IPV6: Fix dependencies.

Although the menu dependencies in net/ipv6/netfilter/Kconfig
guard the entries in that file from the Kconfig GUI, this does
not prevent them from being selected still via "make oldconfig"
when IPV6 etc. is disabled.

So add explicit dependencies.

Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[BNX2]: Fix minor loopback problem.
Michael Chan [Thu, 14 Dec 2006 23:57:04 +0000 (15:57 -0800)]
[BNX2]: Fix minor loopback problem.

Use the configured MAC address instead of the permanent MAC address
for loopback frames.

Update version to 1.5.2.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[BNX2]: Fix bug in bnx2_nvram_write().
Michael Chan [Thu, 14 Dec 2006 23:56:50 +0000 (15:56 -0800)]
[BNX2]: Fix bug in bnx2_nvram_write().

Length was not calculated correctly if the NVRAM offset is on a non-
aligned offset.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[BNX2]: Fix panic in bnx2_tx_int().
Michael Chan [Thu, 14 Dec 2006 23:56:32 +0000 (15:56 -0800)]
[BNX2]: Fix panic in bnx2_tx_int().

There was an off-by-one bug in bnx2_tx_avail().  If the tx ring is
completely full, the producer and consumer indices may be apart by
256 even though the ring size is only 255.  One entry in the ring is
unused and must be properly accounted for when calculating the number
of available entries.  The bug caused the tx ring entries to be
reused by mistake, overwriting active entries, and ultimately causing
it to crash.

This bug rarely occurs because the tx ring is rarely completely full.
We always stop when there is less than MAX_SKB_FRAGS entries available
in the ring.

Thanks to Corey Kovacs <cjk@techma.com> and Andy Gospodarek
<agospoda@redhat.com> for reporting the problem and helping to collect
debug information.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[AX.25]: Fix unchecked rose_add_loopback_neigh uses
Ralf Baechle [Thu, 14 Dec 2006 23:52:13 +0000 (15:52 -0800)]
[AX.25]: Fix unchecked rose_add_loopback_neigh uses

rose_add_loopback_neigh uses kmalloc and the callers were ignoring the
error value.  Rewrite to let the caller deal with the allocation.  This
allows the use of static allocation of kmalloc use entirely.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[AX.25]: Fix unchecked rose_add_loopback_node uses
Ralf Baechle [Thu, 14 Dec 2006 23:51:44 +0000 (15:51 -0800)]
[AX.25]: Fix unchecked rose_add_loopback_node uses

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[AX.25]: Fix unchecked ax25_linkfail_register uses
Ralf Baechle [Thu, 14 Dec 2006 23:51:23 +0000 (15:51 -0800)]
[AX.25]: Fix unchecked ax25_linkfail_register uses

ax25_linkfail_register uses kmalloc and the callers were ignoring the
error value.  Rewrite to let the caller deal with the allocation.  This
allows the use of static allocation of kmalloc use entirely.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[AX.25]: Fix unchecked nr_add_node uses.
Ralf Baechle [Thu, 14 Dec 2006 23:50:58 +0000 (15:50 -0800)]
[AX.25]: Fix unchecked nr_add_node uses.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[AX.25]: Fix unchecked ax25_listen_register uses
Ralf Baechle [Thu, 14 Dec 2006 23:50:34 +0000 (15:50 -0800)]
[AX.25]: Fix unchecked ax25_listen_register uses

Fix ax25_listen_register to return something that's a sane error code,
then all callers to use it.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[AX.25]: Fix unchecked ax25_protocol_register uses.
Ralf Baechle [Thu, 14 Dec 2006 23:50:01 +0000 (15:50 -0800)]
[AX.25]: Fix unchecked ax25_protocol_register uses.

Replace ax25_protocol_register by ax25_register_pid which assumes the
caller has done the memory allocation.  This allows replacing the
kmalloc allocations entirely by static allocations.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[AX.25]: Mark all kmalloc users __must_check
Ralf Baechle [Thu, 14 Dec 2006 23:49:28 +0000 (15:49 -0800)]
[AX.25]: Mark all kmalloc users __must_check

The recent fix 0506d4068bad834aab1141b5dc5e748eb175c6b3 made obvious that
error values were not being propagated through the AX.25 stack.  To help
with that this patch marks all kmalloc users in the AX.25, NETROM and
ROSE stacks as __must_check.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[TG3]: replace kmalloc+memset with kzalloc
Yan Burman [Thu, 14 Dec 2006 23:25:00 +0000 (15:25 -0800)]
[TG3]: replace kmalloc+memset with kzalloc

Replace kmalloc+memset with kzalloc

Signed-off-by: Yan Burman <burman.yan@gmail.com>
Acked-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq
Linus Torvalds [Mon, 18 Dec 2006 03:08:11 +0000 (19:08 -0800)]
Merge /pub/scm/linux/kernel/git/davej/cpufreq

* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] longhaul compile fix.
  [CPUFREQ] Advise not to use longhaul on VIA C7.
  [CPUFREQ] set policy->curfreq on initialization
  [CPUFREQ] Trivial cleanup for acpi read/write port in acpi-cpufreq.c
  [CPUFREQ] fixes typo in cpufreq.c

17 years ago[PATCH] more work_struct fixes: tas300x sound drivers
Al Viro [Fri, 8 Dec 2006 09:16:49 +0000 (09:16 +0000)]
[PATCH] more work_struct fixes: tas300x sound drivers

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
17 years ago[SPARC]: Make bitops use same spinlocks as atomics.
David S. Miller [Mon, 18 Dec 2006 00:18:47 +0000 (16:18 -0800)]
[SPARC]: Make bitops use same spinlocks as atomics.

Recent workqueue changes basically make this a formal requirement.

Also, move atomic32.o from lib-y to obj-y since it exports symbols
to modules.

Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[CPUFREQ] longhaul compile fix.
Dave Jones [Mon, 18 Dec 2006 00:09:59 +0000 (19:09 -0500)]
[CPUFREQ] longhaul compile fix.

Some gcc's are more anal than others about empty switch labels.
error: label at end of compound statement

Signed-off-by: Dave Jones <davej@redhat.com>
17 years ago[CPUFREQ] Advise not to use longhaul on VIA C7.
Dave Jones [Mon, 18 Dec 2006 00:07:35 +0000 (19:07 -0500)]
[CPUFREQ] Advise not to use longhaul on VIA C7.

C7's are centrino speedstep-alike.

Signed-off-by: Dave Jones <davej@redhat.com>
17 years ago[CPUFREQ] set policy->curfreq on initialization
Mattia Dongili [Fri, 15 Dec 2006 18:52:45 +0000 (19:52 +0100)]
[CPUFREQ] set policy->curfreq on initialization

Check the correct variable and set policy->cur upon acpi-cpufreq
initialization to allow the userspace governor to be used as default.

Signed-off-by: Mattia Dongili <malattia@linux.it>
Acked-by: "Pallipadi, Venkatesh" <venkatesh.pallipadi@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Dave Jones <davej@redhat.com>
17 years ago[SPARC]: Update defconfig.
David S. Miller [Sun, 17 Dec 2006 22:21:34 +0000 (14:21 -0800)]
[SPARC]: Update defconfig.

Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[SPARC64]: Mirror x86_64's PERCPU_ENOUGH_ROOM definition.
David S. Miller [Fri, 15 Dec 2006 07:40:57 +0000 (23:40 -0800)]
[SPARC64]: Mirror x86_64's PERCPU_ENOUGH_ROOM definition.

Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[SUNKBD]: Fix sunkbd_enable(sunkbd, 0); obvious.
Fabrice Knevez [Thu, 14 Dec 2006 23:20:29 +0000 (15:20 -0800)]
[SUNKBD]: Fix sunkbd_enable(sunkbd, 0); obvious.

"sunkbd_enable(sunkbd, 0);" has no effect. Adding "sunkbd->enabled =
enable" in sunkbd_enable (obvious)

Signed-off-by: Fabrice Knevez <nuxdoors@cegetel.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[DocBook]: Fix two typos in generic IRQ docs.
David S. Miller [Tue, 12 Dec 2006 09:00:06 +0000 (01:00 -0800)]
[DocBook]: Fix two typos in generic IRQ docs.

desc-status --> desc->status

Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[SPARC64]: Minor irq handling cleanups.
David S. Miller [Tue, 12 Dec 2006 08:59:12 +0000 (00:59 -0800)]
[SPARC64]: Minor irq handling cleanups.

Use struct irq_chip instead of hw_interrupt_type.

Delete hw_resend_irq(), totally unused.

Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[SPARC64]: Kill no-remapping-needed code in head.S
David S. Miller [Tue, 12 Dec 2006 05:06:55 +0000 (21:06 -0800)]
[SPARC64]: Kill no-remapping-needed code in head.S

It branches around some necessary prom calls, which we would
need to do even if we are mapped at the correct location already.
So it doesn't work.

The idea was that this sort of thing could be used for the eventual
kexec implementation, but it is clear that this will need to be
done differently.

Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[PATCH] sys_mincore: s/max/min/
Oleg Nesterov [Sun, 17 Dec 2006 15:52:47 +0000 (18:52 +0300)]
[PATCH] sys_mincore: s/max/min/

fix a typo, sys_mincore() needs min().

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Linus "I'm a moron" Torvalds <torvalds@osdl.org>
17 years ago[PATCH] m68k trivial build fixes
Al Viro [Thu, 14 Dec 2006 15:00:15 +0000 (15:00 +0000)]
[PATCH] m68k trivial build fixes

amikbd: missing declaration
sun3_NCR5380: more work_struct mess
sun3_NCR5380: cast is not an lvalue

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
17 years agoFix up mm/mincore.c error value cases
Linus Torvalds [Sun, 17 Dec 2006 00:01:50 +0000 (16:01 -0800)]
Fix up mm/mincore.c error value cases

Hugh Dickins correctly points out that mincore() is actually _supposed_
to fail on an unmapped hole in the user address space, rather than
return valid ("empty") information about the hole.  This just simplifies
the problem further (I had been misled by our previous confusing and
complicated way of doing mincore()).

Also, in the unlikely situation that we can't allocate a temporary
kernel buffer, we should actually return EAGAIN, not ENOMEM, to keep the
"unmapped hole" and "allocation failure" error cases separate.

Finally, add a comment about our stupid historical lack of support for
anonymous mappings.  I'll fix that if somebody reminds me after 2.6.20
is out.

Acked-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
17 years agoMerge branch 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband
Linus Torvalds [Sat, 16 Dec 2006 21:23:45 +0000 (13:23 -0800)]
Merge branch 'for-linus' of /linux/kernel/git/roland/infiniband

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband:
  IB/mthca: Use DEFINE_MUTEX() instead of mutex_init()
  IB/mthca: Add HCA profile module parameters
  IB/srp: Fix FMR mapping for 32-bit kernels and addresses above 4G
  IB: Fix ib_dma_alloc_coherent() wrapper

17 years agoMerge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik...
Linus Torvalds [Sat, 16 Dec 2006 17:54:23 +0000 (09:54 -0800)]
Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  [PATCH] pata_via: Cable detect error
  [PATCH] Fix help text for CONFIG_ATA_PIIX
  [PATCH] initializer entry defined twice in pata_rz1000
  [PATCH] ata: fix platform_device_register_simple() error check
  [PATCH] ahci: do not mangle saved HOST_CAP while resetting controller
  [PATCH] libata: don't initialize sg in ata_exec_internal() if DMA_NONE (take #2)
  [libata] sata_svw: Disable ATAPI DMA on current boards (errata workaround)
  [libata] use kmap_atomic(KM_IRQ0) in SCSI simulator
  [PATCH] ata_piix: use piix_host_stop() in ich_pata_ops
  [PATCH] ata_piix: IDE mode SATA patch for Intel ICH9

17 years agoMake workqueue bit operations work on "atomic_long_t"
Linus Torvalds [Sat, 16 Dec 2006 17:53:50 +0000 (09:53 -0800)]
Make workqueue bit operations work on "atomic_long_t"

On architectures where the atomicity of the bit operations is handled by
external means (ie a separate spinlock to protect concurrent accesses),
just doing a direct assignment on the workqueue data field (as done by
commit 4594bf159f1962cec3b727954b7c598b07e2e737) can cause the
assignment to be lost due to lack of serialization with the bitops on
the same word.

So we need to serialize the assignment with the locks on those
architectures (notably older ARM chips, PA-RISC and sparc32).

So rather than using an "unsigned long", let's use "atomic_long_t",
which already has a safe assignment operation (atomic_long_set()) on
such architectures.

This requires that the atomic operations use the same atomicity locks as
the bit operations do, but that is largely the case anyway.  Sparc32
will probably need fixing.

Architectures (including modern ARM with LL/SC) that implement sane
atomic operations for SMP won't see any of this matter.

Cc: Russell King <rmk+lkml@arm.linux.org.uk>
Cc: David Howells <dhowells@redhat.com>
Cc: David Miller <davem@davemloft.com>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Linux Arch Maintainers <linux-arch@vger.kernel.org>
Cc: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
17 years agoFix incorrect user space access locking in mincore()
Linus Torvalds [Sat, 16 Dec 2006 17:44:32 +0000 (09:44 -0800)]
Fix incorrect user space access locking in mincore()

Doug Chapman noticed that mincore() will doa "copy_to_user()" of the
result while holding the mmap semaphore for reading, which is a big
no-no.  While a recursive read-lock on a semaphore in the case of a page
fault happens to work, we don't actually allow them due to deadlock
schenarios with writers due to fairness issues.

Doug and Marcel sent in a patch to fix it, but I decided to just rewrite
the mess instead - not just fixing the locking problem, but making the
code smaller and (imho) much easier to understand.

Cc: Doug Chapman <dchapman@redhat.com>
Cc: Marcel Holtmann <holtmann@redhat.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
17 years ago[PATCH] pata_via: Cable detect error
Alan [Sat, 16 Dec 2006 14:32:21 +0000 (14:32 +0000)]
[PATCH] pata_via: Cable detect error

The UDMA66 VIA hardware has no controller side cable detect bits we can
use. This patch minimally fixes the problem by reporting unknown in this
case and using drive side detection.

The old drivers/ide code does some additional tricks but those aren't
appropriate now we are in -rc.

Without this update UDMA66 via controllers run slowly. They don't fail so
it's a borderline call whether this is -rc material or not.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years ago[PATCH] Fix help text for CONFIG_ATA_PIIX
Alan [Sat, 16 Dec 2006 12:54:29 +0000 (12:54 +0000)]
[PATCH] Fix help text for CONFIG_ATA_PIIX

> Thanks for clarifying Bill, and sorry Alan. ata_piix does indeed work
> correctly. The help text is a bit confusing:
>
> config ATA_PIIX
>         tristate "Intel PIIX/ICH SATA support"
>         depends on PCI
>         help
>           This option enables support for ICH5/6/7/8 Serial ATA.
>           If PATA support was enabled previously, this enables
>           support for select Intel PIIX/ICH PATA host controllers.

New help text

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years ago[PATCH] initializer entry defined twice in pata_rz1000
Ira Snyder [Fri, 15 Dec 2006 21:08:52 +0000 (13:08 -0800)]
[PATCH] initializer entry defined twice in pata_rz1000

This removes the extra definition of the .error_handler member
in the pata_rz1000 driver.

Signed-off-by: Ira W. Snyder <kernel@irasnyder.com>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years ago[PATCH] ata: fix platform_device_register_simple() error check
Akinobu Mita [Fri, 15 Dec 2006 21:08:51 +0000 (13:08 -0800)]
[PATCH] ata: fix platform_device_register_simple() error check

The return value of platform_device_register_simple() should be checked
by IS_ERR().

Cc: Jeff Garzik <jgarzik@pobox.com>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years ago[PATCH] ahci: do not mangle saved HOST_CAP while resetting controller
Tejun Heo [Tue, 12 Dec 2006 11:17:32 +0000 (20:17 +0900)]
[PATCH] ahci: do not mangle saved HOST_CAP while resetting controller

Do not mangle with HOST_CAP while resetting controller.  The code is
there for a historical reason.  The mangling breaks controller feature
detection and 0 PORTS_IMPL workaround code.

This problem was spotted by Manoj Kasichainula.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Manoj Kasichainula <manoj@io.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years ago[PATCH] libata: don't initialize sg in ata_exec_internal() if DMA_NONE (take #2)
Tejun Heo [Mon, 11 Dec 2006 17:15:31 +0000 (02:15 +0900)]
[PATCH] libata: don't initialize sg in ata_exec_internal() if DMA_NONE (take #2)

Calling sg_init_one() with NULL buf causes oops on certain
configurations.  Don't initialize sg in ata_exec_internal() if
DMA_NONE and make the function complain if @buf is NULL when dma_dir
isn't DMA_NONE.  While at it, fix comment.

The problem is discovered and initial patch was submitted by Arnd
Bergmann.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years ago[libata] sata_svw: Disable ATAPI DMA on current boards (errata workaround)
Jeff Garzik [Thu, 14 Dec 2006 22:04:33 +0000 (17:04 -0500)]
[libata] sata_svw: Disable ATAPI DMA on current boards (errata workaround)

Current Broadcom/Serverworks SATA boards (including Apple K2 SATA)
have problems with ATAPI DMA, so it is disabled.  ATAPI PIO, ATA PIO,
and ATA DMA continue to work just fine.

Acked-by: Anantha Subramanyam <ananth@broadcom.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years ago[libata] use kmap_atomic(KM_IRQ0) in SCSI simulator
Jeff Garzik [Mon, 11 Dec 2006 16:05:53 +0000 (11:05 -0500)]
[libata] use kmap_atomic(KM_IRQ0) in SCSI simulator

We are inside spin_lock_irqsave().  quoth akpm's debug facility:

 [  231.948000] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
 [  232.232000] ata1.00: configured for UDMA/33
 [  232.404000] WARNING (1) at arch/i386/mm/highmem.c:47 kmap_atomic()
 [  232.404000]  [<c01162e6>] kmap_atomic+0xa9/0x1ab
 [  232.404000]  [<c0242c81>] ata_scsi_rbuf_get+0x1c/0x30
 [  232.404000]  [<c0242caf>] ata_scsi_rbuf_fill+0x1a/0x87
 [  232.404000]  [<c0243ab2>] ata_scsiop_mode_sense+0x0/0x309
 [  232.404000]  [<c01729d5>] end_bio_bh_io_sync+0x0/0x37
 [  232.404000]  [<c02311c6>] scsi_done+0x0/0x16
 [  232.404000]  [<c02311c6>] scsi_done+0x0/0x16
 [  232.404000]  [<c0242dcc>] ata_scsi_simulate+0xb0/0x13f
[...]

Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years ago[PATCH] ata_piix: use piix_host_stop() in ich_pata_ops
Tejun Heo [Mon, 11 Dec 2006 13:26:25 +0000 (22:26 +0900)]
[PATCH] ata_piix: use piix_host_stop() in ich_pata_ops

piix_init_one() allocates host private data which should be freed by
piix_host_stop().  ich_pata_ops wasn't converted to piix_host_stop()
while merging, leaking 4 bytes on driver detach.  Fix it.

This was spotted using Kmemleak by Catalin Marinas.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Catalin Marinas <catalin.marinas@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years ago[PATCH] ata_piix: IDE mode SATA patch for Intel ICH9
Jason Gaston [Thu, 7 Dec 2006 16:57:32 +0000 (08:57 -0800)]
[PATCH] ata_piix: IDE mode SATA patch for Intel ICH9

This updated patch adds the Intel ICH9 IDE mode SATA controller DID's.

Signed-off-by: Jason Gaston <jason.d.gaston@intel.com>
Acked-by: Tejun Heo <htejun@gmail.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoIB/mthca: Use DEFINE_MUTEX() instead of mutex_init()
Roland Dreier [Sat, 16 Dec 2006 04:55:28 +0000 (20:55 -0800)]
IB/mthca: Use DEFINE_MUTEX() instead of mutex_init()

mthca_device_mutex() can be initialized automatically with
DEFINE_MUTEX() rather than explicitly calling mutex_init().  This
saves a bit of text and shrinks the source by a line, so we may as
well do it....

Signed-off-by: Roland Dreier <rolandd@cisco.com>
17 years agoIB/mthca: Add HCA profile module parameters
Leonid Arsh [Sun, 10 Dec 2006 11:40:17 +0000 (13:40 +0200)]
IB/mthca: Add HCA profile module parameters

Add module parameters that enable settting some of the HCA
profile values, such as the number of QPs, CQs, etc.

Signed-off-by: Leonid Arsh <leonida@voltaire.com>
Signed-off-by: Moni Shoua <monis@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
17 years agoFix "delayed_work_pending()" macro expansion
Linus Torvalds [Fri, 15 Dec 2006 22:13:51 +0000 (14:13 -0800)]
Fix "delayed_work_pending()" macro expansion

Nobody uses it, but it was still wrong.  Using the macro argument name
'work' meant that when we used 'work' as a member name, that would also
get replaced by the macro argument.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
17 years agoIB/srp: Fix FMR mapping for 32-bit kernels and addresses above 4G
Roland Dreier [Fri, 15 Dec 2006 22:01:49 +0000 (14:01 -0800)]
IB/srp: Fix FMR mapping for 32-bit kernels and addresses above 4G

struct srp_device.fmr_page_mask was unsigned long, which means that
the top part of addresses above 4G was being chopped off on 32-bit
architectures.  Of course nothing good happens when data from SRP
targets is DMAed to the wrong place.

Fix this by changing fmr_page_mask to u64, to match the addresses
actually used by IB devices.

Thanks to Brian Cain <Brian.Cain@ge.com> and David McMillen
<davem@systemfabricworks.com> for help diagnosing the bug and testing
the fix.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
17 years agoIB: Fix ib_dma_alloc_coherent() wrapper
Roland Dreier [Fri, 15 Dec 2006 21:57:26 +0000 (13:57 -0800)]
IB: Fix ib_dma_alloc_coherent() wrapper

The ib_dma_alloc_coherent() wrapper uses a u64* for the dma_handle
parameter, unlike dma_alloc_coherent, which uses dma_addr_t*.  This
means that we need a temporary variable to handle the case when
ib_dma_alloc_coherent() just falls through directly to
dma_alloc_coherent() on architectures where sizeof u64 != sizeof
dma_addr_t.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
17 years agoMerge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6
Linus Torvalds [Fri, 15 Dec 2006 18:22:22 +0000 (10:22 -0800)]
Merge branch 'for-linus' of git://git390.osdl.marist.edu/linux-2.6

* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
  [S390] cio: css_register_subchannel race.
  [S390] Save prefix register for dump on panic
  [S390] Fix reboot hang
  [S390] Fix reboot hang on LPARs
  [S390] sclp_cpi module license.
  [S390] zcrypt: module unload fixes.
  [S390] Hipersocket multicast queue: make sure outbound handler is called
  [S390] hypfs fixes
  [S390] update default configuration

17 years agoRemove stack unwinder for now
Linus Torvalds [Fri, 15 Dec 2006 16:43:13 +0000 (08:43 -0800)]
Remove stack unwinder for now

It has caused more problems than it ever really solved, and is
apparently not getting cleaned up and fixed.  We can put it back when
it's stable and isn't likely to make warning or bug events worse.

In the meantime, enable frame pointers for more readable stack traces.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
17 years ago[S390] cio: css_register_subchannel race.
Stefan Bader [Fri, 15 Dec 2006 16:18:30 +0000 (17:18 +0100)]
[S390] cio: css_register_subchannel race.

Asynchronous probe can release memory of a subchannel before
css_get_ssd_info is called. To fix this call css_get_ssd_info
before registering with driver core.

Signed-off-by: Stefan Bader <shbader@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
17 years ago[S390] Save prefix register for dump on panic
Michael Holzheu [Fri, 15 Dec 2006 16:18:27 +0000 (17:18 +0100)]
[S390] Save prefix register for dump on panic

The dump tools expect that the saved prefix register points to the
lowcore of the dump cpu. Since we set the prefix register to 0 during
reipl/dump, we have to save the original prefix register. Before we
start the dump program, we copy the original prefix register to the
designated location in the lowcore.

Signed-off-by: Michael Holzheu <holzheu@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
17 years ago[S390] Fix reboot hang
Michael Holzheu [Fri, 15 Dec 2006 16:18:25 +0000 (17:18 +0100)]
[S390] Fix reboot hang

We use printks after shutting down all other cpus. This is not allowed
and can lead to deadlocks. Therefore the printks have to be removed.

Signed-off-by: Michael Holzheu <holzheu@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
17 years ago[S390] Fix reboot hang on LPARs
Michael Holzheu [Fri, 15 Dec 2006 16:18:22 +0000 (17:18 +0100)]
[S390] Fix reboot hang on LPARs

Reboot hangs on LPARs without diag308 support. The reason for this is,
that before the reboot is done, the channel subsystem is shut down.
During the reset on each possible subchannel a "store subchannel" is
done. This operation can end in a program check interruption, if the
specified subchannel set is not implemented by the hardware. During
the reset, currently we do not have a program check handler, which
leads to the described kernel bug. We install now a new program check
handler for the reboot code to fix this problem.

Signed-off-by: Michael Holzheu <holzheu@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
17 years ago[S390] sclp_cpi module license.
Christian Borntraeger [Fri, 15 Dec 2006 16:18:20 +0000 (17:18 +0100)]
[S390] sclp_cpi module license.

sclp_cpi is GPL. Make the module not taint the kernel

Signed-off-by: Christian Borntraeger <cborntra@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
17 years ago[S390] zcrypt: module unload fixes.
Ralph Wuerthner [Fri, 15 Dec 2006 16:18:17 +0000 (17:18 +0100)]
[S390] zcrypt: module unload fixes.

Add code to reset all queues for a domain and add missing tasklet_kill
call to ap bus module exit code.

Signed-off-by: Ralph Wuerthner <rwuerthn@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
17 years ago[S390] Hipersocket multicast queue: make sure outbound handler is called
Ursula Braun [Fri, 15 Dec 2006 16:18:14 +0000 (17:18 +0100)]
[S390] Hipersocket multicast queue: make sure outbound handler is called

A HiperSocket multicast queue works asynchronously. When sending
buffers, the buffer state change from PRIMED to EMPTY may happen
delayed. Reschedule the checking for changes in the outbound queue,
if there are still PRIMED buffers.

Signed-off-by: Ursula Braun <braunu@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
17 years ago[S390] hypfs fixes
Christian Borntraeger [Fri, 15 Dec 2006 16:18:10 +0000 (17:18 +0100)]
[S390] hypfs fixes

Correct typo to make hypfs work on systems that support only diag204
subcode 4 and fix error handling in hypfs_diag_init.

Signed-off-by: Christian Borntraeger <cborntra@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
17 years ago[S390] update default configuration
Martin Schwidefsky [Fri, 15 Dec 2006 16:17:57 +0000 (17:17 +0100)]
[S390] update default configuration

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
17 years ago[PATCH] Generic HID layer - update MAINTAINERS
Jiri Kosina [Thu, 14 Dec 2006 11:03:30 +0000 (12:03 +0100)]
[PATCH] Generic HID layer - update MAINTAINERS

Update MAINTAINERS entry for HID core layer.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
17 years agoinput/hid: Supporting more keys from the HUT Consumer Page
Florian Festi [Thu, 14 Dec 2006 10:59:11 +0000 (11:59 +0100)]
input/hid: Supporting more keys from the HUT Consumer Page

On USB keyboards lots of hot/internet keys are not working. This patch
adds support for a number of keys from the USB HID Usage Table
(http://www.usb.org/developers/devclass_docs/Hut1_12.pdf).

It also adds several new key codes. Most of them are used on real world
keyboards I know. I added some others (KEY_+ EDITOR, GRAPHICSEDITOR, DATABASE,
NEWS, VOICEMAIL, VIDEOPHONE) to avoid "holes".

I also added KEY_ZOOMRESET as it is possible to have a inet keyboard and a
remote control  in parallel and it makes sense to have them behave differently.

Signed-off-by: Florian Festi <ffesti@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
17 years ago[PATCH] Generic HID layer - build: USB_HID should select HID
Jiri Kosina [Thu, 14 Dec 2006 10:49:53 +0000 (11:49 +0100)]
[PATCH] Generic HID layer - build: USB_HID should select HID

Let CONFIG_USB_HID imply CONFIG_HID. Making it only dependent might confuse
users to choose CONFIG_HID, but no particular HID transport drivers.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
17 years ago[PATCH] ib_verbs: Use explicit if-else statements to avoid errors with do-while macros
Ben Collins [Thu, 14 Dec 2006 03:10:05 +0000 (22:10 -0500)]
[PATCH] ib_verbs: Use explicit if-else statements to avoid errors with do-while macros

At least on PPC, the "op ? op : dma" construct causes a compile failure
because the dma_* is a do{}while(0) macro.

This turns all of them into proper if/else to avoid this problem.

Signed-off-by: Ben Collins <bcollins@ubuntu.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
17 years agoLinux v2.6.20-rc1
Linus Torvalds [Thu, 14 Dec 2006 01:14:23 +0000 (17:14 -0800)]
Linux v2.6.20-rc1

.. and so the stabilization phase starts.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
17 years ago[NETFILTER]: bridge-netfilter: remove deferred hooks
Patrick McHardy [Thu, 14 Dec 2006 00:54:25 +0000 (16:54 -0800)]
[NETFILTER]: bridge-netfilter: remove deferred hooks

Remove the deferred hooks and all related code as scheduled in
feature-removal-schedule.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[IPV6]: Make fib6_node subtree depend on IPV6_SUBTREES
Kim Nordlund [Thu, 14 Dec 2006 00:38:29 +0000 (16:38 -0800)]
[IPV6]: Make fib6_node subtree depend on IPV6_SUBTREES

Make fib6_node 'subtree' depend on IPV6_SUBTREES.

Signed-off-by: Kim Nordlund <kim.nordlund@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[SCTP]: Add support for SCTP_CONTEXT socket option.
Ivan Skytte Jorgensen [Thu, 14 Dec 2006 00:34:22 +0000 (16:34 -0800)]
[SCTP]: Add support for SCTP_CONTEXT socket option.

Signed-off-by: Ivan Skytte Jorgensen <isj-sctp@i1.dk>
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[SCTP]: Enable auto loading of SCTP when creating an ipv6 SCTP socket.
Sridhar Samudrala [Thu, 14 Dec 2006 00:33:35 +0000 (16:33 -0800)]
[SCTP]: Enable auto loading of SCTP when creating an ipv6 SCTP socket.

Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[SCTP]: Handle address add/delete events in a more efficient way.
Sridhar Samudrala [Thu, 14 Dec 2006 00:26:26 +0000 (16:26 -0800)]
[SCTP]: Handle address add/delete events in a more efficient way.

Currently in SCTP, we maintain a local address list by rebuilding the whole
list from the device list whenever we get a address add/delete event.

This patch fixes it by only adding/deleting the address for which we
receive the event.

Also removed the sctp_local_addr_lock() which is no longer needed as we
now use list_for_each_safe() to traverse this list. This fixes the bugs
in sctp_copy_laddrs_xxx() routines where we do copy_to_user() while
holding this lock.

Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[TCP]: Fix oops caused by __tcp_put_md5sig_pool()
David S. Miller [Thu, 14 Dec 2006 00:25:44 +0000 (16:25 -0800)]
[TCP]: Fix oops caused by __tcp_put_md5sig_pool()

It should call tcp_free_md5sig_pool() not __tcp_free_md5sig_pool()
so that it does proper refcounting.

Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[IPV6]: Fix IPV6_UNICAST_HOPS getsockopt().
Brian Haley [Wed, 13 Dec 2006 01:09:49 +0000 (17:09 -0800)]
[IPV6]: Fix IPV6_UNICAST_HOPS getsockopt().

> Relevant standard (RFC 3493) notes:
>
>    The IPV6_UNICAST_HOPS option may be used with getsockopt() to
>    determine the hop limit value that the system will use for subsequent
>    unicast packets sent via that socket.
>
> I don't reckon -1 could be the hop limit value.

-1 means un-initialized.

> IMHO, the value from
> case 1 (if socket is connected to some destination), otherwise case 2
> (if bound to a scope interface) or ultimately the default hop limit
> ought to be returned instead, as it will be most often correct, while
> the current behavior is always wrong, unless setsockopt() has been used
> first. I don't if some people may think doing a route lookup in
> getsockopt might be overly expensive, but at least the two other cases
> should be ok, particularly the last one.

The following patch seems to work for me, but this code has behaved this
way for a while, so don't know if it will break any existing apps.

Signed-off-by: Brian Haley <brian.haley@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[DCCP] ccid3: return value in ccid3_hc_rx_calc_first_li
Ian McDonald [Tue, 12 Dec 2006 02:47:59 +0000 (00:47 -0200)]
[DCCP] ccid3: return value in ccid3_hc_rx_calc_first_li

In a recent patch we introduced invalid return codes which will result in the
opposite of what is intended (i.e. send more packets in face of peculiar
network conditions).

This fixes it by returning ~0 which means not calculated as per
dccp_li_hist_calc_i_mean.

Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
17 years ago[NETFILTER]: {ip,ip6,arp}_tables: fix exponential worst-case search for loops
Al Viro [Tue, 12 Dec 2006 08:29:52 +0000 (00:29 -0800)]
[NETFILTER]: {ip,ip6,arp}_tables: fix exponential worst-case search for loops

If we come to node we'd already marked as seen and it's not a part of path
(i.e. we don't have a loop right there), we already know that it isn't a
part of any loop, so we don't need to revisit it.

That speeds the things up if some chain is refered to from several places
and kills O(exp(table size)) worst-case behaviour (without sleeping,
at that, so if you manage to self-LART that way, you are SOL for a long
time)...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[NETFILTER]: ip_tables: ipt and ipt_compat checks unification
Dmitry Mishin [Tue, 12 Dec 2006 08:29:26 +0000 (00:29 -0800)]
[NETFILTER]: ip_tables: ipt and ipt_compat checks unification

Matches and targets verification is duplicated in normal and compat processing
ways. This patch refactors code in order to remove this.

Signed-off-by: Dmitry Mishin <dim@openvz.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
17 years ago[NETFILTER]: x_tables: add missing try to load conntrack from match/targets
Yasuyuki Kozakai [Tue, 12 Dec 2006 08:29:02 +0000 (00:29 -0800)]
[NETFILTER]: x_tables: add missing try to load conntrack from match/targets

CLUSTERIP, CONNMARK, CONNSECMARK, and connbytes need ip_conntrack or
layer 3 protocol module of nf_conntrack.

Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>