Furong Xu [Tue, 14 Feb 2017 09:25:08 +0000 (17:25 +0800)]
ramips: Clean duplicated status property for Omega2 WMAC in dtsi
At the tail of dtsi, wmac is enabled twice, clean the first one
Signed-off-by: Furong Xu <xfr@outlook.com>
Giuseppe Lippolis [Mon, 13 Feb 2017 10:36:41 +0000 (11:36 +0100)]
ramips: fixed sms led polarity into dwr-512 DT
Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
Thibaut VARENE [Sun, 12 Feb 2017 16:11:08 +0000 (17:11 +0100)]
ramips: WN3000RPv3: do not setup switch
The WN3000RPv3 is a repeater with a single ethernet port. Setting up the
switch, even to disable it, is unnecessary and possibly confusing.
Configure LAN as eth0 instead.
Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
Pavel Kubelun [Fri, 10 Feb 2017 11:13:10 +0000 (14:13 +0300)]
ath10k-firmware: update qca9984 firmware
Bump qca9984 firmware.
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
Sven Eckelmann [Fri, 3 Feb 2017 08:14:57 +0000 (09:14 +0100)]
ar71xx: Add missing device package om-watchdog for MR1750
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
Sven Eckelmann [Fri, 23 Sep 2016 07:39:06 +0000 (09:39 +0200)]
ar71xx: add OpenMesh A40 to OpenMesh A60 profile
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
Sven Eckelmann [Fri, 23 Sep 2016 07:40:10 +0000 (09:40 +0200)]
ar71xx: extract ath10k wifi board.bin for the OpenMesh A40 board
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
Sven Eckelmann [Fri, 23 Sep 2016 07:38:34 +0000 (09:38 +0200)]
package/uboot-envtools: add OpenMesh A40 support
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
Sven Eckelmann [Fri, 23 Sep 2016 07:38:10 +0000 (09:38 +0200)]
package/om-watchdog: add OpenMesh A40 support
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
Sven Eckelmann [Fri, 23 Sep 2016 07:37:44 +0000 (09:37 +0200)]
ar71xx: enable sysupgrade for the OpenMesh A40
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
Sven Eckelmann [Fri, 23 Sep 2016 07:36:43 +0000 (09:36 +0200)]
ar71xx: add user-space support for the OpenMesh A40
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
Sven Eckelmann [Fri, 23 Sep 2016 07:36:10 +0000 (09:36 +0200)]
ar71xx: add kernel support for the OpenMesh A40 board
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
Sven Eckelmann [Tue, 9 Aug 2016 14:10:16 +0000 (16:10 +0200)]
ar71xx: create profile and build image for the OpenMesh A60 board
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
Sven Eckelmann [Tue, 9 Aug 2016 14:12:06 +0000 (16:12 +0200)]
ar71xx: extract ath10k wifi board.bin for the OpenMesh A60 board
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
Sven Eckelmann [Tue, 9 Aug 2016 14:02:39 +0000 (16:02 +0200)]
package/uboot-envtools: add OpenMesh a60 support
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
Sven Eckelmann [Tue, 9 Aug 2016 14:01:50 +0000 (16:01 +0200)]
package/om-watchdog: add OpenMesh A60 support
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
Sven Eckelmann [Tue, 9 Aug 2016 14:00:55 +0000 (16:00 +0200)]
ar71xx: enable sysupgrade for the OpenMesh A60
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
Sven Eckelmann [Tue, 9 Aug 2016 14:08:01 +0000 (16:08 +0200)]
scripts/om-fwupgradecfg-gen.sh: add support for the A60
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
Sven Eckelmann [Tue, 9 Aug 2016 14:06:45 +0000 (16:06 +0200)]
ar71xx: add user-space support for the OpenMesh A60
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
Sven Eckelmann [Tue, 9 Aug 2016 13:58:08 +0000 (15:58 +0200)]
ar71xx: add kernel support for the OpenMesh A60 board
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
Sven Eckelmann [Thu, 2 Jun 2016 09:33:13 +0000 (11:33 +0200)]
package/uboot-envtools: add OpenMesh OM2Pv4/-HSv4 support
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
Sven Eckelmann [Thu, 2 Jun 2016 09:31:47 +0000 (11:31 +0200)]
package/om-watchdog: add OpenMesh OM2Pv4/-HSv4 support
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
Sven Eckelmann [Thu, 2 Jun 2016 09:29:23 +0000 (11:29 +0200)]
ar71xx: enable sysupgrade for the OpenMesh OM2Pv4/-HSv4
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
Sven Eckelmann [Thu, 2 Jun 2016 09:25:00 +0000 (11:25 +0200)]
ar71xx: add user-space support for the OpenMesh OM2Pv4/-HSv4
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
Sven Eckelmann [Thu, 2 Jun 2016 09:23:21 +0000 (11:23 +0200)]
ar71xx: add kernel support for the OpenMesh OM2Pv4/-HSv4
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
Sven Eckelmann [Thu, 2 Jun 2016 09:06:39 +0000 (11:06 +0200)]
ar71xx: Remove the v2/v3 from the OpenMesh profile names
The list of v2/v3 devices is getting longer and makes reading the names of
the profiles unnecessary hard.
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
John Crispin [Mon, 13 Feb 2017 11:38:27 +0000 (12:38 +0100)]
ramips: add v4.9 support
NAND support is missing
Signed-off-by: John Crispin <john@phrozen.org>
Ulrich Weber [Fri, 10 Feb 2017 13:28:09 +0000 (14:28 +0100)]
ppp: honor ip6table for IPv6 PPP interfaces
as we do for IPv4 PPP interfaces. When we create the
dynamic IPv6 interface we should inherit ip6table from
main interface.
Signed-off-by: Ulrich Weber <ulrich.weber@riverbed.com>
Florian Eckert [Tue, 7 Feb 2017 14:32:08 +0000 (15:32 +0100)]
ppp: add pppoe-discovery to an independent package
pppoe-discovery performs the same discovery process as pppoe, but does
not initiate a session
Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Jonas Gorski [Mon, 13 Feb 2017 16:40:29 +0000 (17:40 +0100)]
mvebu: append metadata to clearfog sd card images
Fixes the following issue:
root@LEDE:/# sysupgrade /tmp/lede-mvebu-armada-388-clearfog-sdcard.img.gz
Saving metaconfig...
Image metadata not found
Use sysupgrade -F to override this check when downgrading or flashing to vendor firmware
Image check 'fwtool_check_image' failed.
root@LEDE:/#
Acked-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Felix Fietkau [Mon, 13 Feb 2017 10:45:43 +0000 (11:45 +0100)]
sdk: clean scripts/config before packing tarball (FS#504)
Avoids shipping potentially incompatible object files and also reduces
the tarball size
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Mon, 13 Feb 2017 10:30:55 +0000 (11:30 +0100)]
cns3xxx: disable watchdog until it is fixed
It has been reported to cause random reboots on some devices
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sun, 12 Feb 2017 19:31:05 +0000 (20:31 +0100)]
kernel: add missing tracing related config symbols for linux 4.9
Signed-off-by: Felix Fietkau <nbd@nbd.name>
John Crispin [Mon, 13 Feb 2017 09:07:57 +0000 (10:07 +0100)]
apm821xx: adds missing symbol to v4.9 default config
Signed-off-by: John Crispin <john@phrozen.org>
David Pinilla Caparrós [Mon, 30 Jan 2017 14:44:05 +0000 (15:44 +0100)]
base-files: Added a deprecation notice on wifi detect
When running wifi detect, the user will be told on error output that
wifi detect is deprecated, that wifi config must be used instead. Also
the commit that changes it is referenced for further info.
Signed-off-by: David Pinilla Caparrós <dpinitux@gmail.com>
David Pinilla Caparrós [Mon, 30 Jan 2017 14:15:08 +0000 (15:15 +0100)]
base-files: Add wifi config to wifi command usage
Since commit
5f8f8a366136a07df661e31decce2458357c167a wifi detect does
not longer work and wifi config it's used to configure not yet
configured wireless devices.
This commit changes command usage to reflect that change.
Signed-off-by: David Pinilla Caparrós <dpinitux@gmail.com>
Giuseppe Lippolis [Sat, 11 Feb 2017 17:53:33 +0000 (18:53 +0100)]
ramips: added image size into dwr-512 DT
Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
Yangbo Lu [Fri, 10 Feb 2017 18:03:35 +0000 (02:03 +0800)]
layerscape: fix adjust_link for 10G & 2.5G
Added a linux-4.4 patch to fix adjust_link for 10G & 2.5G.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Chuanhong Guo [Sat, 11 Feb 2017 13:32:07 +0000 (21:32 +0800)]
ramips: correct switch configuration for Newifi D1
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Martin Blumenstingl [Sun, 12 Feb 2017 22:29:16 +0000 (22:29 +0000)]
lantiq: fix patching the wifi mac address on BTHOMEHUBV3A
The firmware hotplug script tries to read the mac address from a
partition with the name "uboot-env" which does not exist (instead it's
name is uboot_env). This broke calculation of the new checksum (after
patching the mac address) which resulted in ath9k refusing to use the
EEPROM data.
The original error reported by ath9k was:
PCI: Enabling device 0000:00:0e.0 (0000 -> 0002)
ath: phy0: Bad EEPROM checksum 0x2523
ath: phy0: Unable to initialize hardware; initialization status: -22
ath9k 0000:00:0e.0: Failed to initialize device
Fixes: a20616863d32d9 ("lantiq: use ath9k device tree bindings
binding/owl-loader")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Hans Dedecker [Sun, 12 Feb 2017 17:09:53 +0000 (18:09 +0100)]
netifd: update to git HEAD version
f107656 netifd: Add option to configure locktime for each device
cdc0e80 interface: add prefix assignment priority support
6397f5e device: add veth support
6228d0f wireless: fix _wireless_add_process
7cc2f10 treewide: fix white space errors
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Felix Fietkau [Sun, 12 Feb 2017 14:00:20 +0000 (15:00 +0100)]
mac80211: refresh patches
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Koen Vandeputte [Wed, 8 Feb 2017 15:11:01 +0000 (16:11 +0100)]
mac80211: backport upstream fix for CSA in IBSS mode
Allows to change channels on-the-fly using CSA when using IBSS.
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Thibaut VARENE [Sat, 11 Feb 2017 10:10:37 +0000 (11:10 +0100)]
ar71xx: fix platform_find_rootfspart()
platform_find_rootfspart() fails if the kernel partition comes before the
rootfs partition. The proposed patch fixes this while preserving what I
understand was the original idea: stop at first match.
Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
Baptiste Jonglez [Sun, 12 Feb 2017 13:48:35 +0000 (14:48 +0100)]
build: fix dependency of kernel_menuconfig target
When running "make kernel_menuconfig" in a clean tree, it fails with:
make[1]: *** No rule to make target 'tools/quilt/install'. Stop.
Replacing the dependency with 'tools/quilt/compile' fixes the issue (quilt
and all its prerequisites will be built, and quilt will be installed in
staging_dir).
Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>
Felix Fietkau [Sun, 12 Feb 2017 12:25:08 +0000 (13:25 +0100)]
ath9k: fix various issues in the airtime-fairness implementation
Effects of the bugs could include memory corruption, tx hangs, kernel
crahes, possibly other things as well
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Hauke Mehrtens [Sat, 11 Feb 2017 22:30:30 +0000 (23:30 +0100)]
kernel: fix kmod-rxrpc with kernel 4.9
rxkad will be build into af-rxrpc now and is of type boolean.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Martin Blumenstingl [Sun, 12 Feb 2017 12:36:46 +0000 (13:36 +0100)]
kernel: fix compile error on linux 4.9 with CONFIG_KALLSYMS disabled
Upstream linux commit
7523e4dc5057e "module: use a structure to
encapsulate layout." moves some of the struct module members into a
separate struct module_layout.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Hauke Mehrtens [Sun, 12 Feb 2017 00:40:16 +0000 (01:40 +0100)]
kernel: MIPS: IRQ Stack: Fix erroneous jal to plat_irq_dispatch
This backports the following fix to our mips IRQ stack patches:
https://patchwork.linux-mips.org/patch/15110/
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sun, 12 Feb 2017 00:24:37 +0000 (01:24 +0100)]
lantiq: fix section mismatch in PCIe driver
Do not put the probe function into the __init section, but use the normal
section. This fixes a section mismatch warning.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sun, 12 Feb 2017 00:03:18 +0000 (01:03 +0100)]
ltq-ptm: use netif_trans_update() only for kernel >= 4.7
This fixes a bug introduced in commit
c7ce9908bd58af60153716aa64a7251
"ltq-ptm: fix build with kernel 4.9"
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sat, 11 Feb 2017 14:52:41 +0000 (15:52 +0100)]
lantiq: add support for kernel 4.9
The following patches were dropped because they are already applied
upstream:
0012-pinctrl-lantiq-fix-up-pinmux.patch
0013-MTD-lantiq-xway-fix-invalid-operator.patch
0014-MTD-lantiq-xway-the-latched-command-should-be-persis.patch
0015-MTD-lantiq-xway-remove-endless-loop.patch
0016-MTD-lantiq-xway-add-missing-write_buf-and-read_buf-t.patch
0017-MTD-xway-fix-nand-locking.patch
0044-pinctrl-lantiq-introduce-new-dedicated-devicetree-bi.patch
0045-pinctrl-lantiq-Fix-GPIO-Setup-of-GPIO-Port3.patch
0046-pinctrl-lantiq-2-pins-have-the-wrong-mux-list.patch
0047-irq-fixes.patch
0047-mtd-plat-nand-pass-of-node.patch
0060-usb-dwc2-Add-support-for-Lantiq-ARX-and-XRX-SoCs.patch
0120-MIPS-lantiq-add-support-for-device-tree-file-from-bo.patch
0121-MIPS-lantiq-make-it-possible-to-build-in-no-device-t.patch
122-MIPS-store-the-appended-dtb-address-in-a-variable.patch
The PHY driver was reduced to the code adding the LED configuration,
the rest is already upstream:
0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch
The SPI driver was replaced with the version pending for upstream
inclusion:
New driver:
0090-spi-add-transfer_status-callback.patch
0091-spi-lantiq-ssc-add-support-for-Lantiq-SSC-SPI-controller.patch
Old driver:
0100-spi-add-support-for-Lantiq-SPI-controller.patch
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sat, 11 Feb 2017 16:30:18 +0000 (17:30 +0100)]
ltq-vmmc: fix build with kernel 4.9
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sat, 11 Feb 2017 15:48:43 +0000 (16:48 +0100)]
ltq-ptm: fix build with kernel 4.9
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sat, 11 Feb 2017 18:16:23 +0000 (19:16 +0100)]
kernel: add missing config option for kernel 4.9
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sat, 11 Feb 2017 15:49:02 +0000 (16:49 +0100)]
kernel: add rest controller option for kernel 4.9
Deactivate the reset controllers which could be activated on kernel 4.9
by default.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Felix Fietkau [Sat, 11 Feb 2017 13:30:26 +0000 (14:30 +0100)]
glibc: update to version 2.25
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sat, 11 Feb 2017 18:23:03 +0000 (19:23 +0100)]
glibc: override default rpath to /lib:/usr/lib
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sat, 11 Feb 2017 13:27:41 +0000 (14:27 +0100)]
cns3xxx: clean up patches
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Alberto Bursi [Mon, 6 Feb 2017 10:40:52 +0000 (11:40 +0100)]
kirkwood: add ZyXEL NSA325 device
This patch add ZyXEL NSA325 2-Bay Media Server
The ZyXEL NSA325 device is a Kirkwood based NAS:
- SoC: Marvell
88F6702 1600Mhz
- SDRAM memory: 512MB DDR2 400Mhz
- Gigabit ethernet: Marvell Alaska
- Flash memory: 128MB
- 1 Power button
- 1 Power LED (blue)
- 5 Status LED (green/red)
- 1 Copy/Sync button
- 1 Reset button
- 2 SATA II ports (internal)
- 2 USB 2.0 ports (back)
- 1 USB 3.0 port (front)
- Fan (fixed speed)
- hardware watchdog in a mcu
Basically a bigger, more powerful version of NSA310,
installation is the same as they share the same flash layout.
A notable difference is that there is a hardware watchdog
in a mcu on the board, which is disabled by default in the LEDE u-boot.
The watchdog is also disabled with a GPIO activation through
raw register change when kwbooting or it would reset the board before
the new uboot was transferred.
Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [remove dead code]
Alberto Bursi [Mon, 6 Feb 2017 10:39:21 +0000 (11:39 +0100)]
uboot-kirkwood: add Zyxel NSA325 uboot
add uboot for NSA325
Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
Alberto Bursi [Mon, 6 Feb 2017 10:36:18 +0000 (11:36 +0100)]
uboot-envtools: add nsa325 envs
adding nsa325 envs for consistency with other kirkwoods
Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
Alberto Bursi [Mon, 6 Feb 2017 09:20:47 +0000 (10:20 +0100)]
kirkwood: cleanup nsa310b mac address extraction
switch nsa310b mac address reading to mtd_get_mac_ascii helper as
it seems the fw_env.config file is created way later than when
network is set up, when I tested I still had that file included
in the image through /files folder.
Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
Christian Lamparter [Fri, 10 Feb 2017 16:44:43 +0000 (17:44 +0100)]
apm821xx: add linux 4.9 apm821xx patches
This patch updates the apm821xx target to use the 4.9 kernel.
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Felix Fietkau [Sat, 11 Feb 2017 16:37:53 +0000 (17:37 +0100)]
gdb: update to version 7.12.1, fix glibc 2.25 build issues
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sat, 11 Feb 2017 12:03:07 +0000 (13:03 +0100)]
glibc: use default PATCH_DIR
Version configuration is gone, so version specific patch directories are
not necessary either.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
David Woodhouse [Fri, 10 Feb 2017 11:41:30 +0000 (11:41 +0000)]
x86: Add configuration back for Traverse Geos
When we merged all the Geode boards into one generic target, the default
network and LED configuration was lost. Put it back.
Fixes: 9e0759ea2653 ("x86: merge all geode based subtargets into one")
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Felix Fietkau [Sat, 11 Feb 2017 15:19:15 +0000 (16:19 +0100)]
pppd: fix compile issues with glibc 2.25
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sat, 11 Feb 2017 18:02:50 +0000 (19:02 +0100)]
kernel: fix linux 4.9 host tools portability issues
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sat, 11 Feb 2017 16:46:46 +0000 (17:46 +0100)]
perf: avoid picking up a dependency on libunwind
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sat, 11 Feb 2017 16:53:13 +0000 (17:53 +0100)]
ugps: update to the latest version, fixes build error with glibc
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sat, 11 Feb 2017 15:38:59 +0000 (16:38 +0100)]
tcpdump: fix tcpdump-mini build on glibc 2.25
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sat, 11 Feb 2017 15:04:38 +0000 (16:04 +0100)]
fstools: update to the latest version
Fixes compatibility issues with glibc 2.25
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sat, 11 Feb 2017 14:56:21 +0000 (15:56 +0100)]
procd: update to the latest version
Fixes compatibility issues with glibc 2.25
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Alexey Brodkin [Fri, 10 Feb 2017 19:01:10 +0000 (22:01 +0300)]
toolchain/uclibc: Bump version to 1.0.22
Important change was made in 1.0.18: all sub-libs were merged
in one and only libc similarly to musl.
See [1] for more details.
To support that we had to remove refences to those sub-libs like
libpthread, libcrypt, libdl, libm, libutil etc.
[1] http://cgit.uclibc-ng.org/cgi/cgit/uclibc-ng.git/commit/?id=
29ff9055c80efe77a7130767a9fcb3ab8c67e8ce
Signed-off-by: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Alexey Brodkin [Fri, 10 Feb 2017 18:59:54 +0000 (21:59 +0300)]
toolchain/uclibc: Fix unmanned configuration with "V=s"
Currently on attempt to configure uClibc with "V=s" user is prompted
to answer on configuration questions. Major inconvenience here is
build procedure get paused until user answers all questions.
That happens because not all symbols are defined in our .config.
Solution is as simple as usage of "olddefconfig" target instead of
simple "oldconfig". In that case default values get silently set
for symbols not defined by our .config explicitly.
We haven't noticed that subtle issue before because without "V=s"
what we do is "make oldconfig < /dev/null" which automatically
answers all questions :)
Signed-off-by: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Felix Fietkau [Thu, 9 Feb 2017 18:46:41 +0000 (19:46 +0100)]
toolchain: remove separate prepare/ step
It was a leftover from an old obsoleted dependency chain
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Tim Harvey [Tue, 31 Jan 2017 19:28:53 +0000 (11:28 -0800)]
imx6: move to Linux 4.9 kernel
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 7 Feb 2017 09:38:47 +0000 (10:38 +0100)]
build: remove libc version config code
We only support one version per libc type
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sat, 11 Feb 2017 13:26:36 +0000 (14:26 +0100)]
cns3xxx: add back watchdog support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Alexey Brodkin [Wed, 8 Feb 2017 17:52:08 +0000 (20:52 +0300)]
ARC: use -mcpu=XXX instead of obsolete -mXXX
-mXXX option is deprecated already in arc-2016.03 toolchain
and removed completely starting from arc-2016.09.
Direct replacement is -mcpu=XXX which is already supported by
arc-2016.03 used today in Lede.
With that change we'll be ready for ARC toolchain update still
keeping everything working with current tools.
Signed-off-by: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Cc: John Crispin <john@phrozen.org>
John Crispin [Thu, 9 Feb 2017 17:15:19 +0000 (18:15 +0100)]
kernel: add missing symbols to generic/config-4.9
Signed-off-by: John Crispin <john@phrozen.org>
John Crispin [Thu, 9 Feb 2017 17:08:06 +0000 (18:08 +0100)]
kernel: fix 304-mips_disable_fpu.patch for v4.9
the function prototype has changed, make the new stub consistent with this
change.
Signed-off-by: John Crispin <john@phrozen.org>
Joseph C. Sible [Thu, 2 Feb 2017 06:51:51 +0000 (01:51 -0500)]
dropbear: enable SHA256 HMACs
The only HMACs currently available use MD5 and SHA1, both of which have known
weaknesses. We already compile in the SHA256 code since we use Curve25519
by default, so there's no significant size penalty to enabling this.
Signed-off-by: Joseph C. Sible <josephcsible@users.noreply.github.com>
Koen Vandeputte [Wed, 8 Feb 2017 08:44:13 +0000 (09:44 +0100)]
cns3xxx: switch to linux 4.9
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Koen Vandeputte [Tue, 7 Feb 2017 15:19:18 +0000 (16:19 +0100)]
cns3xxx: add preliminary 4.9 support
Adds preliminary kernel 4.9 support for this target.
- Refreshed/Updated all patches
Added 3 new patches:
- 093 --> Add virtual PCI MMIO mapping
- 230 --> Remove deprecated code
- 240 --> Rework AT24 eeprom code to use the new NVMEM API
Compiled & tested on cns3xxx (gw2388)
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Felix Fietkau [Thu, 9 Feb 2017 18:43:50 +0000 (19:43 +0100)]
build: drop circular dependency
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 10 Feb 2017 09:52:31 +0000 (10:52 +0100)]
mxs: enable nvmem support
fixes build error due to missing kernel config options
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Rafał Miłecki [Fri, 10 Feb 2017 07:30:16 +0000 (08:30 +0100)]
kernel: move upstream accepted bcm47xxpart TRX cleanups
Use 0xx prefix for accepted patches.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Thu, 9 Feb 2017 23:17:08 +0000 (00:17 +0100)]
mac80211: update brcmfmac backporting brcmf_err cleanups
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Daniel Gonzalez Cabanelas [Sat, 3 Dec 2016 14:51:05 +0000 (15:51 +0100)]
brcm63xx: Add Observa VH4032N support
Add support for the Observa Telecom VH4032N router.
This is another BCM6368 router, 128 MB RAM, 32MB flash and 3 USB
host ports.
The wifi chip is an onboard Broadcom BCM43222.
Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
[jonas.gorski: use gpio-hog instead of abusing ephy-reset]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Hans Dedecker [Thu, 9 Feb 2017 17:20:13 +0000 (18:20 +0100)]
odhcpd: update to git HEAD version (FS#396)
8df4253 ndp: harden netlink event socket error handling
b02f3e6 ndp: close proc file descriptor also during error handling
8a615ad npd: rework IPv6 relay logic (FS#396)
0129f79 config: restore interface defaults when cleaning interface
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Felix Fietkau [Thu, 9 Feb 2017 12:34:21 +0000 (13:34 +0100)]
build: make Host/Install/Default use Host/Compile/Default with an extra argument
Allows parallelizing compile steps that might be necessary during install
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Michal Sojka [Thu, 2 Feb 2017 11:13:03 +0000 (12:13 +0100)]
build: Pass -iremap gcc option as a single argument
Passing -iremap argument separately causes problems with projects that
use scons and its ParseFlags function. Consider this SConscript
example:
env = Environment()
d = env.ParseFlags("-iremap one:two")
ParseFlags will interpret one:two as a file name and the returned dict
d will contain only "-iremap". When the -iremap is passed to the
compiler without an argument, compilation obviously fails.
Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz>
Felix Fietkau [Thu, 9 Feb 2017 10:52:52 +0000 (11:52 +0100)]
kernel: remove kmod packages for bridge, stp, llc and 8021q
Remove CONFIG_VLAN_8021Q overrides for two targets
These features are built into the kernel image for all targets
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 9 Feb 2017 12:35:07 +0000 (13:35 +0100)]
toolchain/gcc: parallelize make install
If the staging dir was deleted, the build needs to recompile some files.
This change speeds up this corner case significantly
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 9 Feb 2017 12:35:51 +0000 (13:35 +0100)]
toolchain/musl: parallelize make install
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Etienne Haarsma [Sun, 5 Feb 2017 21:13:36 +0000 (22:13 +0100)]
cmake: update to version 3.7.2
Signed-off-by: Etienne Haarsma <bladeoner112@gmail.com>
Jonas Gorski [Tue, 7 Feb 2017 16:15:36 +0000 (17:15 +0100)]
brcm63xx: Neufbox 6: fix switch by probing through DT
Probe the switch through DT instead of a platform device. This fixes
probe, as GPIO offsets are now properly accounted for.
Fixes the following issue:
[ 0.802953] 8021q: 802.1Q VLAN Support v1.8
[ 0.810518] rtl8366_smi: gpio_request failed for 18, err=-517
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Jonas Gorski [Tue, 7 Feb 2017 18:08:04 +0000 (19:08 +0100)]
brcm63xx: fix lzma loader for BCM6362
BCM6362 and BCM3380 seem to share the same PRID. Disable serial output
for them until we can find a way to tell them apart reliably.
Fixes: 8f3cfe4ba2 ("brcm63xx: lzma-loader: add BCM3380 support")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>