drm/tegra/dc: Use drm_mode_get_hv_timing() to populate plane clip rectangle

Use drm_mode_get_hv_timing() to fill out the plane clip rectangle.

No functional changes as the code already uses crtc_state->mode
to populate the clip, which is also what drm_mode_get_hv_timing()
uses.

Once everyone agrees on this we can move the clip handling into
drm_atomic_helper_check_plane_state().

v2: Rebase due to tegra_plane_state_add() relocating to plane.c

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: linux-tegra@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171123190502.28449-13-ville.syrjala@linux.intel.com

drm/rockchip: Use drm_mode_get_hv_timing() to populate plane clip rectangle

Use drm_mode_get_hv_timing() to fill out the plane clip rectangle.

Note that this replaces crtc_state->adjusted_mode usage with
crtc_state->mode. The latter is the correct choice since that's the
mode the user provided and it matches the plane crtc coordinates
the user also provided.

Once everyone agrees on this we can move the clip handling into
drm_atomic_helper_check_plane_state().

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Mark Yao <mark.yao@rock-chips.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171123190502.28449-12-ville.syrjala@linux.intel.com
Reviewed-by: Thierry Reding <treding@nvidia.com>

drm/nouveau/kms/nv50: Use drm_mode_get_hv_timing() to populate plane clip rectangle

Use drm_mode_get_hv_timing() to fill out the plane clip rectangle.

No functional changes as the code already uses crtc_state->mode
to populate the clip, which is also what drm_mode_get_hv_timing()
uses.

Once everyone agrees on this we can move the clip handling into
drm_atomic_helper_check_plane_state().

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: nouveau@lists.freedesktop.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171123190502.28449-11-ville.syrjala@linux.intel.com
Reviewed-by: Thierry Reding <treding@nvidia.com>

drm/msm/mdp5: Use drm_mode_get_hv_timing() to populate plane clip rectangle

Use drm_mode_get_hv_timing() to fill out the plane clip rectangle.

Note that this replaces crtc_state->adjusted_mode usage with
crtc_state->mode. The latter is the correct choice since that's the
mode the user provided and it matches the plane crtc coordinates
the user also provided.

Once everyone agrees on this we can move the clip handling into
drm_atomic_helper_check_plane_state().

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171123190502.28449-10-ville.syrjala@linux.intel.com
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Reviewed-by: Thierry Reding <treding@nvidia.com>

drm/meson: Use drm_mode_get_hv_timing() to populate plane clip rectangle

Use drm_mode_get_hv_timing() to fill out the plane clip rectangle.

No functional changes as the code already uses crtc_state->mode
to populate the clip, which is also what drm_mode_get_hv_timing()
uses.

Once everyone agrees on this we can move the clip handling into
drm_atomic_helper_check_plane_state().

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: linux-amlogic@lists.infradead.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171123190502.28449-9-ville.syrjala@linux.intel.com
Reviewed-by: Thierry Reding <treding@nvidia.com>

drm/mediatek: Use drm_mode_get_hv_timing() to populate plane clip rectangle

Use drm_mode_get_hv_timing() to fill out the plane clip rectangle.

No functional changes as the code already uses crtc_state->mode
to populate the clip, which is also what drm_mode_get_hv_timing()
uses.

Once everyone agrees on this we can move the clip handling into
drm_atomic_helper_check_plane_state().

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171123190502.28449-8-ville.syrjala@linux.intel.com
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Thierry Reding <treding@nvidia.com>

drm/imx: Use drm_mode_get_hv_timing() to populate plane clip rectangle

Use drm_mode_get_hv_timing() to fill out the plane clip rectangle.

Note that this replaces crtc_state->adjusted_mode usage with
crtc_state->mode. The latter is the correct choice since that's the
mode the user provided and it matches the plane crtc coordinates
the user also provided.

Once everyone agrees on this we can move the clip handling into
drm_atomic_helper_check_plane_state().

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171123190502.28449-7-ville.syrjala@linux.intel.com
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Thierry Reding <treding@nvidia.com>

drm/simple_kms_helper: Use drm_mode_get_hv_timing() to populate plane clip rectangle

Use drm_mode_get_hv_timing() to fill out the plane clip rectangle.

Note that this replaces crtc_state->adjusted_mode usage with
crtc_state->mode. The latter is the correct choice since that's the
mode the user provided and it matches the plane crtc coordinates
the user also provided.

Once everyone agrees on this we can move the clip handling into
drm_atomic_helper_check_plane_state().

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171123190502.28449-6-ville.syrjala@linux.intel.com
Reviewed-by: Thierry Reding <treding@nvidia.com>

drm/arm/mali-dp: Use drm_mode_get_hv_timing() to populate plane clip rectangle

Use drm_mode_get_hv_timing() to fill out the plane clip rectangle.

Note that this replaces crtc_state->adjusted_mode usage with
crtc_state->mode. The latter is the correct choice since that's the
mode the user provided and it matches the plane crtc coordinates
the user also provided.

Once everyone agrees on this we can move the clip handling into
drm_atomic_helper_check_plane_state().

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: Mali DP Maintainers <malidp@foss.arm.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171123190502.28449-5-ville.syrjala@linux.intel.com
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>

drm/arm/hdlcd: Use drm_mode_get_hv_timing() to populate plane clip rectangle

Use drm_mode_get_hv_timing() to fill out the plane clip rectangle.

Note that this replaces crtc_state->adjusted_mode usage with
crtc_state->mode. The latter is the correct choice since that's the
mode the user provided and it matches the plane crtc coordinates
the user also provided.

Once everyone agrees on this we can move the clip handling into
drm_atomic_helper_check_plane_state().

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: Mali DP Maintainers <malidp@foss.arm.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171123190502.28449-4-ville.syrjala@linux.intel.com
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>

drm/i915: Use drm_mode_get_hv_timing() to populate plane clip rectangle

Use drm_mode_get_hv_timing() to fill out the plane clip rectangle.
No functional changes since pipe_src_w/h are already filled via
drm_mode_get_hv_timing().

Once everyone agrees on this we can move the clip handling into
drm_atomic_helper_check_plane_state().

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171123190502.28449-3-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Thierry Reding <treding@nvidia.com>

drm/i915: Reject odd pipe source width with double wide/dual link

In order to guarantee that pipe_src_w/h matches the user mode h/vdisplay
we must not adjust pipe_src_w to accommodate double wide/dual link.
Instead just reject the mode outright.

This will allows us to rely on crtc_state->mode for plane clipping.

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171123190502.28449-2-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Thierry Reding <treding@nvidia.com>

drm/sun4i: Fix build warnings in sunxi_engine.h

Fixes the following build warnings:
In file included from ../drivers/gpu/drm/sun4i/sun8i_mixer.h:18:0,
                 from ../drivers/gpu/drm/sun4i/sun8i_vi_scaler.h:13,
                 from ../drivers/gpu/drm/sun4i/sun8i_vi_scaler.c:12:
../drivers/gpu/drm/sun4i/sunxi_engine.h:36:16: warning: ‘struct drm_crtc_state’ declared inside parameter list will not be visible outside of this definition or declaration
         struct drm_crtc_state *old_state);
                ^~~~~~~~~~~~~~
../drivers/gpu/drm/sun4i/sunxi_engine.h:53:15: warning: ‘struct drm_crtc_state’ declared inside parameter list will not be visible outside of this definition or declaration
        struct drm_crtc_state *state);
               ^~~~~~~~~~~~~~
In file included from ../drivers/gpu/drm/sun4i/sun8i_mixer.h:18:0,
                 from ../drivers/gpu/drm/sun4i/sun8i_ui_scaler.h:12,
                 from ../drivers/gpu/drm/sun4i/sun8i_ui_scaler.c:12:
../drivers/gpu/drm/sun4i/sunxi_engine.h:36:16: warning: ‘struct drm_crtc_state’ declared inside parameter list will not be visible outside of this definition or declaration
         struct drm_crtc_state *old_state);
                ^~~~~~~~~~~~~~
../drivers/gpu/drm/sun4i/sunxi_engine.h:53:15: warning: ‘struct drm_crtc_state’ declared inside parameter list will not be visible outside of this definition or declaration
        struct drm_crtc_state *state);
               ^~~~~~~~~~~~~~

Fixes: 6b8562c86e24 ("drm/sun4i: engine: Create an atomic_begin
callback")
Fixes: 656e5f654903 ("drm/sun4i: engine: Add a custom crtc
atomic_check")
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180122174306.231609-1-seanpaul@chromium.org

drm/panel: panasonic-vvx10f034n00: More return value fixes

A couple more return value fixes which Philippe brought up during our
previous review.

Suggested-by: Philippe CORNU <philippe.cornu@st.com>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180117213751.54668-1-seanpaul@chromium.org

drm/sun4i: backend: Make sure we don't have a commit pending

If we try to read the backend registers while it fetches the new values, we
end up with the value of some random register instead of the one we asked
for.

In order to prevent that, let's make sure that the very first thing we do
during our atomic modesetting is to let the commit bit come to a rest.

We don't have to worry about anything else since the only time we will
trigger a new transaction is during the atomic_commit which comes much
later.

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/35604307e5bde2b85c674de79fa7c4d55700f085.1516613040.git-series.maxime.ripard@free-electrons.com

drm/sun4i: backend: Use runtime_pm variant of atomic_commit_tail

During a hardware commit, the commit bit in the backend will only be
cleared if the TCON is enabled. Use the runtime_pm variant of the
atomic_commit_tail hook that makes sure that the CRTC, our TCON, is enabled
when we perform an atomic_commit.

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/bde95faff2078f63e9af99c3abee5360b9050fd1.1516613040.git-series.maxime.ripard@free-electrons.com

drm/sun4i: backend: Add a custom atomic_check for the frontend

Now that we have everything in place, we can start enabling the frontend.
This is more difficult than one would assume since there can only be one
plane using the frontend per-backend.

We therefore need to make sure that the userspace will not try to setup
multiple planes using it, since that would be impossible. In order to
prevent that, we can create an atomic_check callback that will check that
only one plane will effectively make use of the frontend in a given
configuration, and will toggle the switch in that plane state so that the
proper setup function can do their role.

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/278e6c514a8311750fe627c7f28d58b3e2cbd825.1516613040.git-series.maxime.ripard@free-electrons.com

drm/sun4i: backend: Wire in the frontend

Now that we have a driver, we can make use of it. This is done by
adding a flag to our custom plane state that will trigger whether we should
use the frontend on that particular plane or not.

The rest is just plumbing to set up the backend to not perform the DMA but
receive its data from the frontend.

Note that we're still not making any use of the frontend itself, as no one
is setting the flag yet.

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/cdffc25eab2d817820cc78cbd24f1f4b99902014.1516613040.git-series.maxime.ripard@free-electrons.com

drm/sun4i: Add a driver for the display frontend

The display frontend is an hardware block that can be used to implement
some more advanced features like hardware scaling or colorspace
conversions. It can also be used to implement the output format of the VPU.

Let's create a minimal driver for it that will only enable the hardware
scaling features.

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/029cdc3478bf89d422f5e8d9e600baf5e48ce4db.1516613040.git-series.maxime.ripard@free-electrons.com

drm/sun4i: engine: Create an atomic_begin callback

We have to implement some display engine specific behaviours in
atomic_begin. Let's add a function for that.

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/44110951ae0cc13767fefc7fc1d9e2ec782d0a40.1516613040.git-series.maxime.ripard@free-electrons.com

drm/sun4i: engine: Add a VBLANK quirk callback

In some cases, the display engine needs to apply some quirks during the
VBLANK event. In the Display Engine 1.0 case for example, we can only
disable the frontend once the backend has been, which is at VBLANK.

Let's introduce a callback that can be implemented by the various engines.

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7c298d43aa1500196aa5d15d7a7c0f228c7a6f3c.1516613040.git-series.maxime.ripard@free-electrons.com

drm/sun4i: engine: Add a custom crtc atomic_check

We have some restrictions on what the planes and CRTC can provide that are
tied to only one generation of display engines.

For example, on the first generation, we can only have one YUV plane or one
plane that uses the frontend output.

Let's allow our engines to provide an atomic_check callback to validate the
current configuration.

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e5f5f144e5c20d348cdb29933ae876c105bec017.1516613040.git-series.maxime.ripard@free-electrons.com

drm/sun4i: backend: Add a custom plane state

We will need to store some additional data in the future to the state.
Create a custom plane state that will embed those data, in order to store
the pipe or whether or not that plane should use the frontend.

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/88dd9c2b0caa550595e7b2ff37dc9d0af2c78609.1516613040.git-series.maxime.ripard@free-electrons.com

drm/sun4i: backend: Allow a NULL plane pointer to retrieve the format

The function converting the DRM format to its equivalent in the backend
registers was assuming that we were having a plane.

However, we might want to use that function when setting up a plane using
the frontend, in which case we will not have a plane associated to the
backend's layer. Yet, we still need to setup the format to the one output
by the frontend.

Test for NULL plane pointers before referencing them, so that we can work
around it.

Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/bfbe4c2e8525a7542526b648d59a8f3546e905f1.1516613040.git-series.maxime.ripard@free-electrons.com

drm/sun4i: backend: Document the engine operations

Our operations were missing some documentation to explain what was expected
from them.

Let's make that clearer.

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fdcd8ec3ae9ecd73ef089ede5218d3a41b49be05.1516613040.git-series.maxime.ripard@free-electrons.com

drm/sun4i: backend: Move line stride setup to buffer setup function

Setup the line stride in the buffer setup function, since it's tied to the
buffer itself, and is not needed when we do not set the buffer in the
backend.

This is for example the case when using the frontend and then routing its
output to the backend.

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/cbec84125bc0d5a6cf1d856b8291fbf77b138881.1516613040.git-series.maxime.ripard@free-electrons.com

Merge airlied/drm-next into drm-misc-next

It's been a while since we've backmerged drm-next. Dave just brought
back 4.15-rc8, so now's a good time to freshen things up around here.

Signed-off-by: Sean Paul <seanpaul@chromium.org>

drm: add kernel doc for exported gem dmabuf_ops

Signed-off-by: Samuel Li <Samuel.Li@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1516311860-24949-1-git-send-email-Samuel.Li@amd.com

drm/i2c: tda998x: Remove duplicate NULL check

Since i2c_unregister_device() became NULL-aware we may remove duplicate
NULL check.

Cc: Russell King <linux@armlinux.org.uk>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171031142149.32512-8-andriy.shevchenko@linux.intel.com
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i2c/sil164: Remove duplicate NULL check

Since i2c_unregister_device() became NULL-aware we may remove duplicate
NULL check.

Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171031142149.32512-7-andriy.shevchenko@linux.intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/bridge: analogix-anx78xx: Remove duplicate NULL check

Since i2c_unregister_device() became NULL-aware we may remove duplicate
NULL check.

Cc: Archit Taneja <architt@codeaurora.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171031142149.32512-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

BackMerge tag 'v4.15-rc8' into drm-next

Linux 4.15-rc8

Daniel requested this for so the intel CI won't fall over on drm-next
so often.

drm/panel: panasonic-vvx10f034n00: Fix wuxga_nt_panel_disable() return value

Return value for mipi_dsi_shutdown_peripheral() is unchecked.
Check it and return any errors if they come up. Even if
mipi_dsi_shutdown_peripheral() fails, continue attempting to
disable.

Cc: Philippe Cornu <philippe.cornu@st.com>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180116222217.240939-1-seanpaul@chromium.org

drm/dsi: Fix improper use of mipi_dsi_device_transfer() return value

The function mipi_dsi_device_transfer() returns the number of transmitted
or received bytes on success or a negative error code on failure.

The functions mipi_dsi_shutdown_peripheral(), mipi_dsi_turn_on_peripheral() &
mipi_dsi_set_maximum_return_packet_size() use improperly this returned
value in case of success: 0 should be returned instead of the number of
transmitted bytes.

Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180112144847.18810-1-philippe.cornu@st.com

drm/bridge/synopsys: dsi: handle endianness correctly in dw_mipi_dsi_write()

We're filling the "remainder" word with little-endian data, then writing
it out to IO registers with endian-correcting writel(). That probably
won't work on big-endian systems.

Let's mark the "remainder" variable as LE32 (since we fill it with
memcpy()) and do the swapping explicitly.

Some of this function could be done more easily without memcpy(), but
the unaligned "remainder" case is a little hard to do without
potentially overrunning 'tx_buf', so I just applied the same solution in
all cases (memcpy() + le32_to_cpu()).

Tested only on a little-endian system.

Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180109203248.139249-2-briannorris@chromium.org

drm/bridge/synopsys: dsi: use common mipi_dsi_create_packet()

This takes care of 2 TODOs in this driver, by using the common DSI
packet-marshalling code instead of our custom short/long write code.
This both saves us some duplicated code and gets us free support for
command types that weren't already part of our switch block (e.g.,
MIPI_DSI_GENERIC_LONG_WRITE).

The code logic stays mostly intact, except that it becomes unnecessary
to split the short/long write functions, and we have to copy data a bit
more.

Along the way, I noticed that loop bounds were a little odd:

while (DIV_ROUND_UP(len, pld_data_bytes))

This really was just supposed to be 'len != 0', so I made that more
clear.

Tested on RK3399 with some pending refactoring patches by Nickey Yang,
to make the Rockchip DSI driver wrap this common driver.

Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180109203248.139249-1-briannorris@chromium.org

drm/bridge/synopsys: dsi: make dw_mipi_dsi_bridge_mode_set() static

sparse complains:

drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c:703:6: warning: symbol
'dw_mipi_dsi_bridge_mode_set' was not declared. Should it be static?

Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180109203319.139520-1-briannorris@chromium.org

drm/tinydrm/mipi-dbi: Change reset active time

The MIPI DBI spec states that reset active/low time should be more
than 9us. Change from 20ms to 20us.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: David Lechner <david@lechnology.com>
Tested-by: David Lechner <david@lechnology.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180110185940.53841-8-noralf@tronnes.org

drm/tinydrm: Embed the mode in tinydrm_connector

Embed the mode in tinydrm_connector instead of doing an devm_ allocation.
Remove unnecessary use of ret variable at the end of
tinydrm_display_pipe_init().

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: David Lechner <david@lechnology.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180110185940.53841-7-noralf@tronnes.org

drm/tinydrm/mi0283qt: Let the display pipe handle power

It's better to leave power handling and controller init to the
modesetting machinery using the simple pipe .enable and .disable
callbacks. Remove unused mipi_dbi_pipe_enable().

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: David Lechner <david@lechnology.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180110185940.53841-6-noralf@tronnes.org

drm/tinydrm/mipi-dbi: Add poweron-reset functions

Split out common poweron-reset functionality.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: David Lechner <david@lechnology.com>
Tested-by: David Lechner <david@lechnology.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180110185940.53841-5-noralf@tronnes.org

drm/tinydrm/mipi-dbi: Add mipi_dbi_enable_flush()

Add and use a function for enabling, flushing and turning on backlight.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: David Lechner <david@lechnology.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180110185940.53841-4-noralf@tronnes.org

drm/tinydrm/mi0283qt: Remove ili9341.h

No need for a public header file for the command macros.
Just include the necessary ones in the driver.

Also use the MIPI_DCS_PIXEL_FMT_16BIT macro.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: David Lechner <david@lechnology.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180110185940.53841-3-noralf@tronnes.org

drm/tinydrm/mi0283qt: Use common include order

Include linux headers before drm headers as it's commonly done.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: David Lechner <david@lechnology.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180110185940.53841-2-noralf@tronnes.org

Linux 4.15-rc8

Merge branch 'x86-pti-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fixlet from Thomas Gleixner.

Remove a warning about lack of compiler support for retpoline that most
people can't do anything about, so it just annoys them needlessly.

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/retpoline: Remove compile time warning

Merge tag 'powerpc-4.15-7' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:
 "One fix for an oops at boot if we take a hotplug interrupt before we
  are ready to handle it.

  The bulk is patches to implement mitigation for Meltdown, see the
  change logs for more details.

  Thanks to: Nicholas Piggin, Michael Neuling, Oliver O'Halloran, Jon
  Masters, Jose Ricardo Ziviani, David Gibson"

* tag 'powerpc-4.15-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/powernv: Check device-tree for RFI flush settings
  powerpc/pseries: Query hypervisor for RFI flush settings
  powerpc/64s: Support disabling RFI flush with no_rfi_flush and nopti
  powerpc/64s: Add support for RFI flush of L1-D cache
  powerpc/64s: Convert slb_miss_common to use RFI_TO_USER/KERNEL
  powerpc/64: Convert fast_exception_return to use RFI_TO_USER/KERNEL
  powerpc/64: Convert the syscall exit path to use RFI_TO_USER/KERNEL
  powerpc/64s: Simple RFI macro conversions
  powerpc/64: Add macros for annotating the destination of rfid/hrfid
  powerpc/pseries: Add H_GET_CPU_CHARACTERISTICS flags & wrapper
  powerpc/pseries: Make RAS IRQ explicitly dependent on DLPAR WQ

x86/retpoline: Remove compile time warning

Remove the compile time warning when CONFIG_RETPOLINE=y and the compiler
does not have retpoline support. Linus rationale for this is:

  It's wrong because it will just make people turn off RETPOLINE, and the
  asm updates - and return stack clearing - that are independent of the
  compiler are likely the most important parts because they are likely the
  ones easiest to target.

  And it's annoying because most people won't be able to do anything about
  it. The number of people building their own compiler? Very small. So if
  their distro hasn't got a compiler yet (and pretty much nobody does), the
  warning is just annoying crap.

  It is already properly reported as part of the sysfs interface. The
  compile-time warning only encourages bad things.

Fixes: 76b043848fd2 ("x86/retpoline: Add initial retpoline support")
Requested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: gnomes@lxorguk.ukuu.org.uk
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: thomas.lendacky@amd.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kees Cook <keescook@google.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org>
Link: https://lkml.kernel.org/r/CA+55aFzWgquv4i6Mab6bASqYXg3ErV3XDFEYf=GEcCDQg5uAtw@mail.gmail.com

Merge branch 'for-linus' of git://git.kernel.dk/linux-block

Pull NVMe fix from Jens Axboe:
 "Just a single fix for nvme over fabrics that should go into 4.15"

* 'for-linus' of git://git.kernel.dk/linux-block:
  nvme-fabrics: initialize default host->id in nvmf_host_default()

Merge branch 'x86-pti-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 pti updates from Thomas Gleixner:
 "This contains:

   - a PTI bugfix to avoid setting reserved CR3 bits when PCID is
     disabled. This seems to cause issues on a virtual machine at least
     and is incorrect according to the AMD manual.

   - a PTI bugfix which disables the perf BTS facility if PTI is
     enabled. The BTS AUX buffer is not globally visible and causes the
     CPU to fault when the mapping disappears on switching CR3 to user
     space. A full fix which restores BTS on PTI is non trivial and will
     be worked on.

   - PTI bugfixes for EFI and trusted boot which make sure that the user
     space visible page table entries have the NX bit cleared

   - removal of dead code in the PTI pagetable setup functions

   - add PTI documentation

   - add a selftest for vsyscall to verify that the kernel actually
     implements what it advertises.

   - a sysfs interface to expose vulnerability and mitigation
     information so there is a coherent way for users to retrieve the
     status.

   - the initial spectre_v2 mitigations, aka retpoline:

      + The necessary ASM thunk and compiler support

      + The ASM variants of retpoline and the conversion of affected ASM
        code

      + Make LFENCE serializing on AMD so it can be used as speculation
        trap

      + The RSB fill after vmexit

   - initial objtool support for retpoline

  As I said in the status mail this is the most of the set of patches
  which should go into 4.15 except two straight forward patches still on
  hold:

   - the retpoline add on of LFENCE which waits for ACKs

   - the RSB fill after context switch

  Both should be ready to go early next week and with that we'll have
  covered the major holes of spectre_v2 and go back to normality"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits)
  x86,perf: Disable intel_bts when PTI
  security/Kconfig: Correct the Documentation reference for PTI
  x86/pti: Fix !PCID and sanitize defines
  selftests/x86: Add test_vsyscall
  x86/retpoline: Fill return stack buffer on vmexit
  x86/retpoline/irq32: Convert assembler indirect jumps
  x86/retpoline/checksum32: Convert assembler indirect jumps
  x86/retpoline/xen: Convert Xen hypercall indirect jumps
  x86/retpoline/hyperv: Convert assembler indirect jumps
  x86/retpoline/ftrace: Convert ftrace assembler indirect jumps
  x86/retpoline/entry: Convert entry assembler indirect jumps
  x86/retpoline/crypto: Convert crypto assembler indirect jumps
  x86/spectre: Add boot time option to select Spectre v2 mitigation
  x86/retpoline: Add initial retpoline support
  objtool: Allow alternatives to be ignored
  objtool: Detect jumps to retpoline thunks
  x86/pti: Make unpoison of pgd for trusted boot work for real
  x86/alternatives: Fix optimize_nops() checking
  sysfs/cpu: Fix typos in vulnerability documentation
  x86/cpu/AMD: Use LFENCE_RDTSC in preference to MFENCE_RDTSC
  ...

x86,perf: Disable intel_bts when PTI

The intel_bts driver does not use the 'normal' BTS buffer which is exposed
through the cpu_entry_area but instead uses the memory allocated for the
perf AUX buffer.

This obviously comes apart when using PTI because then the kernel mapping;
which includes that AUX buffer memory; disappears. Fixing this requires to
expose a mapping which is visible in all context and that's not trivial.

As a quick fix disable this driver when PTI is enabled to prevent
malfunction.

Fixes: 385ce0ea4c07 ("x86/mm/pti: Add Kconfig")
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Reported-by: Robert Święcki <robert@swiecki.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: greg@kroah.com
Cc: hughd@google.com
Cc: luto@amacapital.net
Cc: Vince Weaver <vince@deater.net>
Cc: torvalds@linux-foundation.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180114102713.GB6166@worktop.programming.kicks-ass.net

security/Kconfig: Correct the Documentation reference for PTI

When the config option for PTI was added a reference to documentation was
added as well. But the documentation did not exist at that point. The final
documentation has a different file name.

Fix it up to point to the proper file.

Fixes: 385ce0ea ("x86/mm/pti: Add Kconfig")
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: linux-mm@kvack.org
Cc: linux-security-module@vger.kernel.org
Cc: James Morris <james.l.morris@oracle.com>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/3009cc8ccbddcd897ec1e0cb6dda524929de0d14.1515799398.git.wking@tremily.us

x86/pti: Fix !PCID and sanitize defines

The switch to the user space page tables in the low level ASM code sets
unconditionally bit 12 and bit 11 of CR3. Bit 12 is switching the base
address of the page directory to the user part, bit 11 is switching the
PCID to the PCID associated with the user page tables.

This fails on a machine which lacks PCID support because bit 11 is set in
CR3. Bit 11 is reserved when PCID is inactive.

While the Intel SDM claims that the reserved bits are ignored when PCID is
disabled, the AMD APM states that they should be cleared.

This went unnoticed as the AMD APM was not checked when the code was
developed and reviewed and test systems with Intel CPUs never failed to
boot. The report is against a Centos 6 host where the guest fails to boot,
so it's not yet clear whether this is a virt issue or can happen on real
hardware too, but thats irrelevant as the AMD APM clearly ask for clearing
the reserved bits.

Make sure that on non PCID machines bit 11 is not set by the page table
switching code.

Andy suggested to rename the related bits and masks so they are clearly
describing what they should be used for, which is done as well for clarity.

That split could have been done with alternatives but the macro hell is
horrible and ugly. This can be done on top if someone cares to remove the
extra orq. For now it's a straight forward fix.

Fixes: 6fd166aae78c ("x86/mm: Use/Fix PCID to optimize user/kernel switches")
Reported-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable <stable@vger.kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Willy Tarreau <w@1wt.eu>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801140009150.2371@nanos

Merge tag 'usb-4.15-rc8' of git://git./linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are some small USB fixes and device ids for 4.15-rc8

  Nothing major, small fixes for various devices, some resolutions for
  bugs found by fuzzers, and the usual handful of new device ids.

  All of these have been in linux-next with no reported issues"

* tag 'usb-4.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  Documentation: usb: fix typo in UVC gadgetfs config command
  usb: misc: usb3503: make sure reset is low for at least 100us
  uas: ignore UAS for Norelsys NS1068(X) chips
  USB: UDC core: fix double-free in usb_add_gadget_udc_release
  USB: fix usbmon BUG trigger
  usbip: vudc_tx: fix v_send_ret_submit() vulnerability to null xfer buffer
  usbip: remove kernel addresses from usb device and urb debug msgs
  usbip: fix vudc_rx: harden CMD_SUBMIT path to handle malicious input
  USB: serial: cp210x: add new device ID ELV ALC 8xxx
  USB: serial: cp210x: add IDs for LifeScan OneTouch Verio IQ

Merge tag 'staging-4.15-rc8' of git://git./linux/kernel/git/gregkh/staging

Pull staging driver fix from Greg KH:
 "Here is a single android ashmem bugfix that resolves a reported issue
  in that interface. It's been in linux-next this week with no reported
  issues"

* tag 'staging-4.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: android: ashmem: fix a race condition in ASHMEM_SET_SIZE ioctl

Merge tag 'char-misc-4.15-rc8' of git://git./linux/kernel/git/gregkh/char-misc

Pull char/misc fixes from Greg KH:
 "Here are two bugfixes for some driver bugs for 4.15-rc8

  The first is a bluetooth security bug that has been ignored by the
  Bluetooth developers for months for no obvious reason at all, so I've
  taken it through my tree.

  The second is a simple double-free bug in the mux subsystem.

  Both have been in linux-next for a while with no reported issues"

* tag 'char-misc-4.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  mux: core: fix double get_device()
  Bluetooth: Prevent stack info leak from the EFS element.

Merge tag 'kbuild-fixes-v4.15' of git://git./linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - fix cross-compilation for architectures that setup CROSS_COMPILE in
   their arch Makefile

 - fix Kconfig rational operators for bool / tristate

 - drop a gperf-generated file from .gitignore

* tag 'kbuild-fixes-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  genksyms: drop *.hash.c from .gitignore
  kconfig: fix relational operators for bool and tristate symbols
  kbuild: move cc-option and cc-disable-warning after incl. arch Makefile

Merge tag 'apparmor-pr-2018-01-12' of git://git./linux/kernel/git/jj/linux-apparmor

Pull apparmor regression fixes from John Johansen:
 "This fixes a couple bugs I have been working with Matthew Garrett on
  this week. Specifically a regression in the handling of a conflicting
  profile attachment and label match restrictions for ptrace when
  profiles are stacked.

  Summary:

   - fix ptrace label match when matching stacked labels

   - fix regression in profile conflict logic"

* tag 'apparmor-pr-2018-01-12' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
  apparmor: Fix regression in profile conflict logic
  apparmor: fix ptrace label match when matching stacked labels

Merge tag 'pci-v4.15-fixes-2' of git://git./linux/kernel/git/helgaas/pci

Pull PCI fixes from Bjorn Helgaas:
 "Fix AMD boot regression due to 64-bit window conflicting with system
  memory (Christian König)"

* tag 'pci-v4.15-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  x86/PCI: Move and shrink AMD 64-bit window to avoid conflict
  x86/PCI: Add "pci=big_root_window" option for AMD 64-bit windows

Merge branch 'akpm' (patches from Andrew)

Merge misc fixlets from Andrew Morton:
 "4 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  tools/objtool/Makefile: don't assume sync-check.sh is executable
  kdump: write correct address of mem_section into vmcoreinfo
  kmemleak: allow to coexist with fault injection
  MAINTAINERS, nilfs2: change project home URLs

tools/objtool/Makefile: don't assume sync-check.sh is executable

patch(1) loses the x bit.  So if a user follows our patching
instructions in Documentation/admin-guide/README.rst, their kernel will
not compile.

Fixes: 3bd51c5a371de ("objtool: Move kernel headers/code sync check to a script")
Reported-by: Nicolas Bock <nicolasbock@gentoo.org>
Reported-by Joakim Tjernlund <Joakim.Tjernlund@infinera.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kdump: write correct address of mem_section into vmcoreinfo

Depending on configuration mem_section can now be an array or a pointer
to an array allocated dynamically.  In most cases, we can continue to
refer to it as 'mem_section' regardless of what it is.

But there's one exception: '&mem_section' means "address of the array"
if mem_section is an array, but if mem_section is a pointer, it would
mean "address of the pointer".

We've stepped onto this in kdump code.  VMCOREINFO_SYMBOL(mem_section)
writes down address of pointer into vmcoreinfo, not array as we wanted.

Let's introduce VMCOREINFO_SYMBOL_ARRAY() that would handle the
situation correctly for both cases.

Link: http://lkml.kernel.org/r/20180112162532.35896-1-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Fixes: 83e3c48729d9 ("mm/sparsemem: Allocate mem_section at runtime for CONFIG_SPARSEMEM_EXTREME=y")
Acked-by: Baoquan He <bhe@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Dave Young <dyoung@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kmemleak: allow to coexist with fault injection

kmemleak does one slab allocation per user allocation.  So if slab fault
injection is enabled to any degree, kmemleak instantly fails to allocate
and turns itself off.  However, it's useful to use kmemleak with fault
injection to find leaks on error paths.  On the other hand, checking
kmemleak itself is not so useful because (1) it's a debugging tool and
(2) it has a very regular allocation pattern (basically a single
allocation site, so it either works or not).

Turn off fault injection for kmemleak allocations.

Link: http://lkml.kernel.org/r/20180109192243.19316-1-dvyukov@google.com
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS, nilfs2: change project home URLs

The domain of NILFS project home was changed to "nilfs.sourceforge.io"
to enable https access (the previous domain "nilfs.sourceforge.net" is
redirected to the new one).  Modify URLs of the project home to reflect
this change and to replace their protocol from http to https.

Link: http://lkml.kernel.org/r/1515416141-5614-1-git-send-email-konishi.ryusuke@lab.ntt.co.jp
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

genksyms: drop *.hash.c from .gitignore

This is a left-over of commit bb3290d91695 ("Remove gperf usage from
toolchain").

We do not generate a hash function any more.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

selftests/x86: Add test_vsyscall

This tests that the vsyscall entries do what they're expected to do.
It also confirms that attempts to read the vsyscall page behave as
expected.

If changes are made to the vsyscall code or its memory map handling,
running this test in all three of vsyscall=none, vsyscall=emulate,
and vsyscall=native are helpful.

(Because it's easy, this also compares the vsyscall results to their
 vDSO equivalents.)

Note to KAISER backporters: please test this under all three
vsyscall modes.  Also, in the emulate and native modes, make sure
that test_vsyscall_64 agrees with the command line or config
option as to which mode you're in.  It's quite easy to mess up
the kernel such that native mode accidentally emulates
or vice versa.

Greg, etc: please backport this to all your Meltdown-patched
kernels.  It'll help make sure the patches didn't regress
vsyscalls.

CSigned-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/2b9c5a174c1d60fd7774461d518aa75598b1d8fd.1515719552.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

apparmor: Fix regression in profile conflict logic

The intended behaviour in apparmor profile matching is to flag a
conflict if two profiles match equally well. However, right now a
conflict is generated if another profile has the same match length even
if that profile doesn't actually match. Fix the logic so we only
generate a conflict if the profiles match.

Fixes: 844b8292b631 ("apparmor: ensure that undecidable profile attachments fail")
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Matthew Garrett <mjg59@google.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>

apparmor: fix ptrace label match when matching stacked labels

Given a label with a profile stack of
  A//&B or A//&C ...

A ptrace rule should be able to specify a generic trace pattern with
a rule like

  ptrace trace A//&**,

however this is failing because while the correct label match routine
is called, it is being done post label decomposition so it is always
being done against a profile instead of the stacked label.

To fix this refactor the cross check to pass the full peer label in to
the label_match.

Fixes: 290f458a4f16 ("apparmor: allow ptrace checks to be finer grained than just capability")
Cc: Stable <stable@vger.kernel.org>
Reported-by: Matthew Garrett <mjg59@google.com>
Tested-by: Matthew Garrett <mjg59@google.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>

Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Ingo Molnar:
 "Two pending (non-PTI) x86 fixes:

   - an Intel-MID crash fix

   - and an Intel microcode loader blacklist quirk to avoid a
     problematic revision"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/platform/intel-mid: Revert "Make 'bt_sfi_data' const"
  x86/microcode/intel: Extend BDW late-loading with a revision check

Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull scheduler fixes from Ingo Molnar:
 "A Kconfig fix, a build fix and a membarrier bug fix"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  membarrier: Disable preemption when calling smp_call_function_many()
  sched/isolation: Make CONFIG_CPU_ISOLATION=y depend on SMP or COMPILE_TEST
  ia64, sched/cputime: Fix build error if CONFIG_VIRT_CPU_ACCOUNTING_NATIVE=y

Merge branch 'locking-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull locking fixes from Ingo Molnar:
 "No functional effects intended: removes leftovers from recent lockdep
  and refcounts work"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/refcounts: Remove stale comment from the ARCH_HAS_REFCOUNT Kconfig entry
  locking/lockdep: Remove cross-release leftovers
  locking/Documentation: Remove stale crossrelease_fullstack parameter

Merge tag 'for-linus-4.15-rc8-tag' of git://git./linux/kernel/git/xen/tip

Pull xen fixes from Juergen Gross:
 "This contains two build fixes for clang and two fixes for rather
  unlikely situations in the Xen gntdev driver"

* tag 'for-linus-4.15-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/gntdev: Fix partial gntdev_mmap() cleanup
  xen/gntdev: Fix off-by-one error when unmapping with holes
  x86: xen: remove the use of VLAIS
  x86/xen/time: fix section mismatch for xen_init_time_ops()

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull KVM fixes from Paolo Bonzini:
 "PPC:
   - user-triggerable use-after-free in HPT resizing
   - stale TLB entries in the guest
   - trap-and-emulate (PR) KVM guests failing to start under pHyp

  x86:
   - Another "Spectre" fix.
   - async pagefault fix
   - Revert an old fix for x86 nested virtualization, which turned out
     to do more harm than good
   - Check shrinker registration return code, to avoid warnings from
     upcoming 4.16 -mm patches"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: Add memory barrier on vmcs field lookup
  KVM: x86: emulate #UD while in guest mode
  x86: kvm: propagate register_shrinker return code
  KVM MMU: check pending exception before injecting APF
  KVM: PPC: Book3S HV: Always flush TLB in kvmppc_alloc_reset_hpt()
  KVM: PPC: Book3S PR: Fix WIMG handling under pHyp
  KVM: PPC: Book3S HV: Fix use after free in case of multiple resize requests
  KVM: PPC: Book3S HV: Drop prepare_done from struct kvm_resize_hpt

Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6

Pull crypto fix from Herbert Xu:
 "This fixes a NULL pointer dereference in crypto_remove_spawns that can
  be triggered through af_alg"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: algapi - fix NULL dereference in crypto_remove_spawns()

Merge branch 'nvme-4.15' of git://git.infradead.org/nvme into for-linus

Pull a single NVMe fix from Christoph for 4.15.

Merge tag 'mmc-v4.15-rc2-2' of git://git./linux/kernel/git/ulfh/mmc

Pull MMC host fixes from Ulf Hansson:

 - s3mci: mark debug_regs[] as static

 - renesas_sdhi: Add MODULE_LICENSE

* tag 'mmc-v4.15-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: s3mci: mark debug_regs[] as static
  mmc: renesas_sdhi: Add MODULE_LICENSE

Merge tag 'drm-fixes-for-v4.15-rc8' of git://people.freedesktop.org/~airlied/linux

Pull drm fixes from Dave Airlie:

 - Nouveau: regression fix

 - Tegra: regression fix

 - vmwgfx: crasher + freed data leak

 - i915: KASAN use after free fix, whitelist register to avoid hang fix,
   GVT fixes

 - vc4: irq/pm fix

* tag 'drm-fixes-for-v4.15-rc8' of git://people.freedesktop.org/~airlied/linux:
  drm/i915: Don't adjust priority on an already signaled fence
  drm/i915: Whitelist SLICE_COMMON_ECO_CHICKEN1 on Geminilake.
  drm/vmwgfx: Potential off by one in vmw_view_add()
  drm/tegra: sor: Fix hang on Tegra124 eDP
  drm/vmwgfx: Don't cache framebuffer maps
  drm/nouveau/disp/gf119: add missing drive vfunc ptr
  drm/i915/gvt: Fix stack-out-of-bounds bug in cmd parser
  drm/i915/gvt: Clear the shadow page table entry after post-sync
  drm/vc4: Move IRQ enable to PM path

x86/retpoline: Fill return stack buffer on vmexit

In accordance with the Intel and AMD documentation, we need to overwrite
all entries in the RSB on exiting a guest, to prevent malicious branch
target predictions from affecting the host kernel. This is needed both
for retpoline and for IBRS.

[ak: numbers again for the RSB stuffing labels]

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: gnomes@lxorguk.ukuu.org.uk
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: thomas.lendacky@amd.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kees Cook <keescook@google.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Link: https://lkml.kernel.org/r/1515755487-8524-1-git-send-email-dwmw@amazon.co.uk

drm/pl111: Support handling bridge timings

If the bridge has a too strict setup time for the incoming
signals, we may not be fast enough and then we need to
compensate by outputting the signal on the inverse clock
edge so it is for sure stable when the bridge samples it.

Since bridges in difference to panels does not expose their
connectors, make the connector optional in the display
setup code.

Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180112074854.9560-4-linus.walleij@linaro.org

drm/bridge: Add timing support to dumb VGA DAC

This extends the dumb VGA DAC bridge to handle the THS8134A
and THS8134B VGA DACs in addition to those already handled.

We assign the proper timing data to the pointer inside the
bridge struct so display controllers that need to align their
timings to the bridge can pick it up and work from there.

Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180112074854.9560-3-linus.walleij@linaro.org

drm/bridge: Provide a way to embed timing info in bridges

After some discussion and failed patch sets trying to convey
the right timing information between the display engine and
a bridge using the connector, I try instead to use an optional
timing information container in the bridge itself, so that
display engines can retrieve it from any bridge and use it to
determine how to drive outputs.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180112074854.9560-2-linus.walleij@linaro.org

drm/bridge: Add bindings for TI THS8134

This adds device tree bindings for the Texas Instruments
THS8134, THS8134A and THS8134B VGA DACs by extending and
renaming the existing bindings for THS8135.

These DACs are used for the VGA outputs on the ARM reference
designs such as Integrator, Versatile and RealView.

Cc: devicetree@vger.kernel.org
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180112074854.9560-1-linus.walleij@linaro.org

Merge branch 'drm-next-4.16' of git://people.freedesktop.org/~agd5f/linux into drm-next

A few fixes for 4.16:
- Cleanup the the remains of ttm io_mem_pfn
- A couple dpm quirks for SI
- Add Chunming as another amdgpu maintainer
- A few more huge page fixes
- A few other misc fixes

* 'drm-next-4.16' of git://people.freedesktop.org/~agd5f/linux:
  drm/amd/pp: Implement get_max_high_clocks for CI/VI
  MAINTAINERS: add David (Chunming) Zhou as additional amdgpu maintainer
  drm/amdgpu: fix 64bit BAR detection
  drm/amdgpu: optimize moved handling only when vm_debug is inactive
  drm/amdgpu: simplify huge page handling
  drm/amdgpu: update VM PDs after the PTs
  drm/amdgpu: minor optimize VM moved handling v2
  drm/amdgpu: loosen the criteria for huge pages a bit
  drm/amd/powerplay: set pp_num_states as 0 on error situation
  drm/ttm: specify DMA_ATTR_NO_WARN for huge page pools
  drm/ttm: remove ttm_bo_default_io_mem_pfn
  staging: remove the default io_mem_pfn set
  drm/amd/powerplay: fix memory leakage when reload (v2)
  drm/amdgpu/gfx9: only init the apertures used by KGD (v2)
  drm/amdgpu: add atpx quirk handling (v2)
  drm/amdgpu: Add dpm quirk for Jet PRO (v2)
  drm/radeon: Add dpm quirk for Jet PRO (v2)

Merge tag 'drm-intel-fixes-2018-01-11-1' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

Hopefully final drm/i915 fixes for v4.15:
- Fix a KASAN reported use after free
- Whitelist a register to avoid hangs
- GVT fixes

* tag 'drm-intel-fixes-2018-01-11-1' of git://anongit.freedesktop.org/drm/drm-intel:
  drm/i915: Don't adjust priority on an already signaled fence
  drm/i915: Whitelist SLICE_COMMON_ECO_CHICKEN1 on Geminilake.
  drm/i915/gvt: Fix stack-out-of-bounds bug in cmd parser
  drm/i915/gvt: Clear the shadow page table entry after post-sync

Merge branch 'vmwgfx-fixes-4.15' of git://people.freedesktop.org/~thomash/linux into drm-fixes

Two important fixes for vmwgfx.
The off-by-one fix could cause a malicious user to potentially crash the
kernel.
The framebuffer map cache fix can under some circumstances enable a user to
read from or write to freed pages.

* 'vmwgfx-fixes-4.15' of git://people.freedesktop.org/~thomash/linux:
  drm/vmwgfx: Potential off by one in vmw_view_add()
  drm/vmwgfx: Don't cache framebuffer maps

Merge tag 'drm/tegra/for-4.15-rc8' of git://anongit.freedesktop.org/tegra/linux into drm-fixes

drm/tegra: Fixes for v4.15-rc8

A single fix for a Tegra124 eDP regression introduced by the SOR changes
in v4.15-rc1.

* tag 'drm/tegra/for-4.15-rc8' of git://anongit.freedesktop.org/tegra/linux:
  drm/tegra: sor: Fix hang on Tegra124 eDP

Merge tag 'drm/tegra/for-4.16-rc1-fixes' of git://anongit.freedesktop.org/tegra/linux into drm-next

drm/tegra: Changes for v4.16-rc1

The bulk of these changes are preparation work and addition of support
for Tegra186. Currently only HDMI output (the primary output on Jetson
TX2) is supported, but the hardware is also capable of doing DSI and
DisplayPort.

Tegra DRM now also uses the atomic commit helpers instead of the open-
coded variant that was only doing half its job. As a bit of a byproduct
of the Tegra186 support the driver also gained HDMI 2.0 as well as zpos
property support.

Along the way there are also a few patches to clean up a few things and
fix minor issues.

* tag 'drm/tegra/for-4.16-rc1-fixes' of git://anongit.freedesktop.org/tegra/linux: (51 commits)
  drm/tegra: dc: Properly cleanup overlay planes
  drm/tegra: dc: Fix possible_crtcs mask for planes
  drm/tegra: dc: Restore YUV overlay support
  drm/tegra: dc: Implement legacy blending
  drm/tegra: Correct timeout in tegra_syncpt_wait
  drm/tegra: gem: Correct iommu_map_sg() error checking
  drm/tegra: dc: Link DC1 to DC0 on Tegra20
  drm/tegra: Fix non-debugfs builds
  drm/tegra: dpaux: Keep reset defaults for hybrid pad parameters
  drm/tegra: Mark Tegra186 display hub PM functions __maybe_unused
  drm/tegra: Use IOMMU groups
  gpu: host1x: Use IOMMU groups
  drm/tegra: Implement zpos property
  drm/tegra: dc: Remove redundant spinlock
  drm/tegra: dc: Use direct offset to plane registers
  drm/tegra: dc: Support more formats
  drm/tegra: fb: Force alpha formats
  drm/tegra: dpaux: Add Tegra186 support
  drm/tegra: dpaux: Implement runtime PM
  drm/tegra: sor: Support HDMI 2.0 modes
  ...

Merge tag 'drm-msm-next-2018-01-10' of git://people.freedesktop.org/~robclark/linux into drm-next

Updates for 4.16.. fairly small this time around, main thing is
devfreq support for the gpu.

* tag 'drm-msm-next-2018-01-10' of git://people.freedesktop.org/~robclark/linux:
  drm/msm: Add devfreq support for the GPU
  drm/msm/adreno: a5xx: Explicitly program the CP0 performance counter
  drm/msm/adreno: Read the speed bins for a5xx targets
  drm/msm/adreno: Move clock parsing to adreno_gpu_init()
  drm/msm/adreno: Cleanup chipid parsing
  drm/msm/gpu: Remove unused bus scaling code
  drm/msm/adreno: Remove a useless call to dev_pm_opp_get_freq()
  drm/msm/adreno: Call dev_pm_opp_put()
  drm/msm: Fix NULL deref in adreno_load_gpu
  drm/msm: gpu: Only sync fences on rings that exist
  drm/msm: fix leak in failed get_pages
  drm/msm: avoid false-positive -Wmaybe-uninitialized warning
  drm/msm/mdp4: Deduplicate bus_find_device() by name matching
  drm/msm: add missing MODULE_FIRMWARE declarations
  drm/msm: update adreno firmware path in MODULE_FIRMWARE
  drm/msm: free kstrdup'd cmdline
  drm/msm: fix msm_rd_dump_submit prototype
  drm/msm: fix spelling mistake: "ringubffer" -> "ringbuffer"

Merge tag 'ceph-for-4.15-rc8' of git://github.com/ceph/ceph-client

Pull ceph fixes from Ilya Dryomov:
 "Two rbd fixes for 4.12 and 4.2 issues respectively, marked for
  stable"

* tag 'ceph-for-4.15-rc8' of git://github.com/ceph/ceph-client:
  rbd: set max_segments to USHRT_MAX
  rbd: reacquire lock should update lock owner client id

Merge tag 'gpio-v4.15-4' of git://git./linux/kernel/git/linusw/linux-gpio

Pull GPIO fix from Linus Walleij:
 "Fix a raw vs elaborate GPIO descriptor bug introduced by yours truly"

* tag 'gpio-v4.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: Add missing open drain/source handling to gpiod_set_value_cansleep()

x86/retpoline/irq32: Convert assembler indirect jumps

Convert all indirect jumps in 32bit irq inline asm code to use non
speculative sequences.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: gnomes@lxorguk.ukuu.org.uk
Cc: Rik van Riel <riel@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: thomas.lendacky@amd.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kees Cook <keescook@google.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Link: https://lkml.kernel.org/r/1515707194-20531-12-git-send-email-dwmw@amazon.co.uk

x86/retpoline/checksum32: Convert assembler indirect jumps

Convert all indirect jumps in 32bit checksum assembler code to use
non-speculative sequences when CONFIG_RETPOLINE is enabled.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: gnomes@lxorguk.ukuu.org.uk
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: thomas.lendacky@amd.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kees Cook <keescook@google.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Link: https://lkml.kernel.org/r/1515707194-20531-11-git-send-email-dwmw@amazon.co.uk

x86/retpoline/xen: Convert Xen hypercall indirect jumps

Convert indirect call in Xen hypercall to use non-speculative sequence,
when CONFIG_RETPOLINE is enabled.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: gnomes@lxorguk.ukuu.org.uk
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: thomas.lendacky@amd.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kees Cook <keescook@google.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Link: https://lkml.kernel.org/r/1515707194-20531-10-git-send-email-dwmw@amazon.co.uk

x86/retpoline/hyperv: Convert assembler indirect jumps

Convert all indirect jumps in hyperv inline asm code to use non-speculative
sequences when CONFIG_RETPOLINE is enabled.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: gnomes@lxorguk.ukuu.org.uk
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: thomas.lendacky@amd.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kees Cook <keescook@google.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Link: https://lkml.kernel.org/r/1515707194-20531-9-git-send-email-dwmw@amazon.co.uk

x86/retpoline/ftrace: Convert ftrace assembler indirect jumps

Convert all indirect jumps in ftrace assembler code to use non-speculative
sequences when CONFIG_RETPOLINE is enabled.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: gnomes@lxorguk.ukuu.org.uk
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: thomas.lendacky@amd.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kees Cook <keescook@google.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Link: https://lkml.kernel.org/r/1515707194-20531-8-git-send-email-dwmw@amazon.co.uk

x86/retpoline/entry: Convert entry assembler indirect jumps

Convert indirect jumps in core 32/64bit entry assembler code to use
non-speculative sequences when CONFIG_RETPOLINE is enabled.

Don't use CALL_NOSPEC in entry_SYSCALL_64_fastpath because the return
address after the 'call' instruction must be *precisely* at the
.Lentry_SYSCALL_64_after_fastpath label for stub_ptregs_64 to work,
and the use of alternatives will mess that up unless we play horrid
games to prepend with NOPs and make the variants the same length. It's
not worth it; in the case where we ALTERNATIVE out the retpoline, the
first instruction at __x86.indirect_thunk.rax is going to be a bare
jmp *%rax anyway.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: gnomes@lxorguk.ukuu.org.uk
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: thomas.lendacky@amd.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kees Cook <keescook@google.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Link: https://lkml.kernel.org/r/1515707194-20531-7-git-send-email-dwmw@amazon.co.uk

x86/retpoline/crypto: Convert crypto assembler indirect jumps

Convert all indirect jumps in crypto assembler code to use non-speculative
sequences when CONFIG_RETPOLINE is enabled.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: gnomes@lxorguk.ukuu.org.uk
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: thomas.lendacky@amd.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kees Cook <keescook@google.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Link: https://lkml.kernel.org/r/1515707194-20531-6-git-send-email-dwmw@amazon.co.uk

x86/spectre: Add boot time option to select Spectre v2 mitigation

Add a spectre_v2= option to select the mitigation used for the indirect
branch speculation vulnerability.

Currently, the only option available is retpoline, in its various forms.
This will be expanded to cover the new IBRS/IBPB microcode features.

The RETPOLINE_AMD feature relies on a serializing LFENCE for speculation
control. For AMD hardware, only set RETPOLINE_AMD if LFENCE is a
serializing instruction, which is indicated by the LFENCE_RDTSC feature.

[ tglx: Folded back the LFENCE/AMD fixes and reworked it so IBRS
   integration becomes simple ]

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: gnomes@lxorguk.ukuu.org.uk
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: thomas.lendacky@amd.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kees Cook <keescook@google.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Link: https://lkml.kernel.org/r/1515707194-20531-5-git-send-email-dwmw@amazon.co.uk

x86/retpoline: Add initial retpoline support

Enable the use of -mindirect-branch=thunk-extern in newer GCC, and provide
the corresponding thunks. Provide assembler macros for invoking the thunks
in the same way that GCC does, from native and inline assembler.

This adds X86_FEATURE_RETPOLINE and sets it by default on all CPUs. In
some circumstances, IBRS microcode features may be used instead, and the
retpoline can be disabled.

On AMD CPUs if lfence is serialising, the retpoline can be dramatically
simplified to a simple "lfence; jmp *\reg". A future patch, after it has
been verified that lfence really is serialising in all circumstances, can
enable this by setting the X86_FEATURE_RETPOLINE_AMD feature bit in addition
to X86_FEATURE_RETPOLINE.

Do not align the retpoline in the altinstr section, because there is no
guarantee that it stays aligned when it's copied over the oldinstr during
alternative patching.

[ Andi Kleen: Rename the macros, add CONFIG_RETPOLINE option, export thunks]
[ tglx: Put actual function CALL/JMP in front of the macros, convert to
   symbolic labels ]
[ dwmw2: Convert back to numeric labels, merge objtool fixes ]

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: gnomes@lxorguk.ukuu.org.uk
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: thomas.lendacky@amd.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kees Cook <keescook@google.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Link: https://lkml.kernel.org/r/1515707194-20531-4-git-send-email-dwmw@amazon.co.uk

objtool: Allow alternatives to be ignored

Getting objtool to understand retpolines is going to be a bit of a
challenge.  For now, take advantage of the fact that retpolines are
patched in with alternatives.  Just read the original (sane)
non-alternative instruction, and ignore the patched-in retpoline.

This allows objtool to understand the control flow *around* the
retpoline, even if it can't yet follow what's inside.  This means the
ORC unwinder will fail to unwind from inside a retpoline, but will work
fine otherwise.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: gnomes@lxorguk.ukuu.org.uk
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: thomas.lendacky@amd.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kees Cook <keescook@google.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Link: https://lkml.kernel.org/r/1515707194-20531-3-git-send-email-dwmw@amazon.co.uk