starfive: drop 6.1 support

Now that 6.6 is the default, remove the 6.1 config and patches.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

starfive: switch default to 6.6

Switch the default kernel to 6.6.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

octeon: set Linux 6.6 as the default kernel

And remove support for 6.1 while at it.

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/15838
Signed-off-by: Robert Marko <robimarko@gmail.com>

octeon: add support for testing kernel 6.6

A rather trivial addition. Patches automatically rebased. Also add the new
CONFIG_USB_DWC3_OCTEON (disabled) to the generic 6.6 config and sort it, while
at it.

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/15838
Signed-off-by: Robert Marko <robimarko@gmail.com>

bcm53xx: drop 6.1 support

Drop config and files for Linux 6.1.

Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/16103
Signed-off-by: Robert Marko <robimarko@gmail.com>

bcm53xx: drop 5.15 support

Drop config and files for Linux 5.15.

Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/16103
Signed-off-by: Robert Marko <robimarko@gmail.com>

bcm53xx: use kernel 6.6 by default

Switch to Linux kernel version 6.6.

Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/16103
Signed-off-by: Robert Marko <robimarko@gmail.com>

bpf: fix llvm version check

- specify CC target explicitly

Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/15703
Signed-off-by: Robert Marko <robimarko@gmail.com>

kernel: bump 6.6 to 6.6.50

Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.50

All patch automatically rebased.

Test version: r27317-8e6543fae5
Build system: x86/64
Build-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3
Run-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3

Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/16351
Signed-off-by: Nick Hainke <vincent@systemli.org>

kernel: bump 6.1 to 6.1.109

https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.109

All patches automatically rebased.

Build system: bcm53xx octeon

Signed-off-by: Zxl hhyccc <zxlhhy@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16353
Signed-off-by: Nick Hainke <vincent@systemli.org>

scripts/feeds: Support feed update with git pull --rebase --autostash

Add feed update option '-s' that performs 'git pull --rebase --autostash':
* possible local uncommited changes are autostashed before pull,
* local commits are then rebased on top of the new commits pulled
  from origin and
* finally git does 'stash pop'.

This enables feed update while there are local development commits
and possibly also local uncommited changes.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Link: https://github.com/openwrt/openwrt/pull/15377
Signed-off-by: Robert Marko <robimarko@gmail.com>

scripts/feeds: Support feed update with git pull --rebase

Add feed update option '-r' to perform "git pull --rebase" so that
possible local commits are rebased on top of the new commits pulled
from origin. That enables git pull while there are local
development commits.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Link: https://github.com/openwrt/openwrt/pull/15377
Signed-off-by: Robert Marko <robimarko@gmail.com>

rockchip: backport pcie update for rock 5a

This enables the M.2 E-key on ROCK 5A board.
Reorder rk356x patch while at it.

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Link: https://github.com/openwrt/openwrt/pull/16340
Signed-off-by: Robert Marko <robimarko@gmail.com>

uboot-rockchip: sort build target alphabetically

move nanopc-t6 recipes above rock 5b.

Fixes: 9482341a4752 ("rockchip: add support for nanopc t6")
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Link: https://github.com/openwrt/openwrt/pull/16340
Signed-off-by: Robert Marko <robimarko@gmail.com>

ipq807x: add support for TP-Link EAP660 HD v1

Specifications:
* SoC: Qualcomm IPQ8072A (64-bit Quad-core Arm Cortex-A53 @ 2200MHz)
* Memory: 2x ESMT M15T4G16256A-DEBG2G (1 GiB DDR3-1866 13-13-13)
* Serial Port: 3v3 TTL 115200n8
* Wi-Fi: QCN5054 (4x4 5 GHz 802.11ax)
* Wi-Fi: QCN5024 (4x4 2.4 GHz 802.11b/g/n/ax)
* Ethernet: QCA8081 (10/100/1000/2.5GBASE-T)
* Flash: Winbond W29N01HZSINF (128 MiB)
* LEDs: 1x Blue Status (GPIO 42 Active High)
* Buttons: 1x Reset (GPIO 50 Active Low)

Installation Instructions (Serial+TFTP):
1. Solder 4 pin header to JP1 and bridge pads of R58 and R62.
2. Connect 3V3 TTL port to TX, RX, and GND, which are positions 1, 2,
   and 3 respectively. Be sure to crossover TX and RX.
3. Copy RAM firmware image
   openwrt-qualcommax-ipq807x-tplink_eap660hd-v1-initramfs-uImage.itb
   to TFTP server root, available at 192.168.10.1.
4. Connect PoE ethernet cable to the RJ45 port and hold Ctrl+B in the
   serial console (115200 baud) until autoboot is halted.
5. Run the following commands in the U-boot prompt:
   # tftpboot 0x44000000 openwrt-qualcommax-ipq807x-tplink_eap660hd-v1-initramfs-uImage.itb
   # bootm
   You may need to type Ctrl+C and Enter before running these commands
   to clear invisible characters from the buffer.
6. Run the following command in a terminal to copy the sysupgrade image
   to be installed (check IP address):
   $ scp openwrt-qualcommax-ipq807x-tplink_eap660hd-v1-squashfs-sysupgrade.bin root@192.168.1.1:/tmp/
7. Activate the OpenWrt serial console and run the following commands:
   # cd /tmp
   # sysupgrade -n openwrt-qualcommax-ipq807x-tplink_eap660hd-v1-squashfs-sysupgrade.bin
8. The AP will reboot and OpenWrt will be successfully installed.

Signed-off-by: George Witt <george.witt@nltsproject.org>
Link: https://github.com/openwrt/openwrt/pull/15832
Signed-off-by: Robert Marko <robimarko@gmail.com>

uboot-laniq: fix compilation with GCC14

GCC errors on returning int in void function now.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16348
Signed-off-by: Robert Marko <robimarko@gmail.com>

starfive: 6.6: add serial1 alias for JH7100

This alias was present in 6.1. Add back to restore a fully working console after
sbi0 (earlycon) gets disabled during the boot process.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

ramips: pinctrl-aw9523: update to current upstream

Various cleanups and bugfixes were applied.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16215
Signed-off-by: Robert Marko <robimarko@gmail.com>

mpc85xx: add static to init functions

No reason for them not to be so. Matches various upstream commits for
PPC.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16345
Signed-off-by: Robert Marko <robimarko@gmail.com>

mpc85xx: remove calibrate_decr

With upstream commit 0aafbdf35c75cbfec82636d01e6dc7950bc1507c , this is
now default. No need to override.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16345
Signed-off-by: Robert Marko <robimarko@gmail.com>

mpc85xx: replace probe with compatible

Upstream commit does this for simple cases, which all of these are.

Commit: 1c96fcdef8c7492ecf34ed70102a1ae5253ef9d1

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16345
Signed-off-by: Robert Marko <robimarko@gmail.com>

mpc85xx: remove unneeded headers

949e1a0856c4a04ac4a3fee1bd4a0cc69ac187c5 moved this code to DTS. Not
needed anymore.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16345
Signed-off-by: Robert Marko <robimarko@gmail.com>

openssl: update to 3.0.15

OpenSSL 3.0.15 is a security patch release. The most severe CVE fixed in this release is Moderate.

This release incorporates the following bug fixes and mitigations:

  * Fixed possible denial of service in X.509 name checks (CVE-2024-6119)

  * Fixed possible buffer overread in SSL_select_next_proto() (CVE-2024-5535)

Added github releases url as source mirror

Signed-off-by: Ivan Pavlov <AuthorReflex@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16332
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

uboot-envtools: add u-boot system env config for Xiaomi Redmi AX6S

Adds u-boot config for access to system env variables on this board

Signed-off-by: Ivan Pavlov <AuthorReflex@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16312
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

wireguard-tools: accept iproute2 as dependency

If the user has ip-tiny or ip-full installed there is no need to depend on
BusyBox having any form of `ip` or `ip link` applets.

Signed-off-by: Christian Svensson <blue@cmd.nu>
Link: https://github.com/openwrt/openwrt/pull/16062
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

kernel: Activate POSIX ACL for f2fs, jffs2 and tmpfs

When CONFIG_USE_FS_ACL_ATTR is set we will also activate POSIX ACL
support for the f2fs, jffs2 and tmpfs file system. This option is
activated on all targets with big flash.

Link: https://github.com/openwrt/openwrt/pull/16181
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

kernel: activate *_FS_SECURITY and *_FS_ACL_ATTR options for all big flash targets

This patch activate *_FS_SECURITY and *_FS_ACL_ATTR options for all big flash memory targets.
Fixes docker error: "failed to register layer: lsetxattr security.capability /usr/bin/ping: operation not supported"
Forum discussion:
https://forum.openwrt.org/t/docker-pull-fails-failed-to-register-layer-operation-not-supported/138253

Signed-off-by: Leo Barsky <leobrsky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/16181
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

hostapd: ensure that interface name is not null

Include hotfix suggested by Sebastian Gottschall to fix bug introduced
with APuP patchset

Signed-off-by: Gioacchino Mazzurco <gio@polymathes.cc>
Link: https://github.com/mirror/dd-wrt/commit/0c3001a69e8d8300569e416de856c96e903ad130
Link: https://github.com/openwrt/openwrt/pull/16298
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

kernel: bump 6.1 to 6.1.108

https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.108

All patches automatically rebased.

Build system: bcm53xx octeon

Signed-off-by: Zxl hhyccc <zxlhhy@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16325
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

kernel: bump 6.6 to 6.6.49

Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.49

All patches automatically rebased.

Build system: x86/64
Build-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3
Run-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3

Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/16328
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

ltq-ptm: propagate reset errors to probe

Instead of avoiding returning, propagate error so that the kernel
infrastructure can handle it.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16262
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

ltq-atm: propagate EPROBE_DEFER to probe

Instead of ignoring errors, let the linux infrastructure handle it.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16262
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

filogic: add missing 2.5G PHY LEDs configuration for Zyxel EX5700

configure 2.5G PHY LEDs to:

2500/1000: green with blink on TX/RX
100/10: green+yellow with blink on TX/RX

which is similar to other 1G PHY LEDs, which are:

1000: green with blink on TX/RX
100/10: green+yellow with blink on TX/RX

Fixes: 6cc14bf66aa ("filogic: support Telenor branded ZyXEL EX5700")
Signed-off-by: Yan Cangang <nalanzeyu@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16082
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

mt76: update to Git HEAD (2024-09-05)

5c5e685eb028 wifi: mt76: mt7915: improve hardware recovery
a897606f7c26 wifi: mt76: mt76x0: fix locking regression
65cc3daf2a33 wifi: mt76: support per-band MAC addresses from OF child nodes

Signed-off-by: Felix Fietkau <nbd@nbd.name>

netifd: update to Git HEAD (2024-09-05)

61c606d6e66b device: simplify external device settings handling

Signed-off-by: Felix Fietkau <nbd@nbd.name>

kernel: bridge: fix switchdev host mdb entry updates

Avoid imbalance in host multicast database updates

Signed-off-by: Felix Fietkau <nbd@nbd.name>

bpftool: add host build

Besides probing BPF information in running system, bpftool is also used in
generating skeleton, dumping BTF, etc. that is widely used in modern BPF
development. Make it available as a host tool so that we can use it in
package build.

Tested build targeting malta/le on Arch Linux x86_64. bpftools currently
does not support processing cross-endian BPF objects, so big-endian host
is needed to build for big-endian targets using bpftools.

Signed-off-by: Eric Long <i@hack3r.moe>
Link: https://github.com/openwrt/openwrt/pull/16122
Signed-off-by: Robert Marko <robimarko@gmail.com>

netifd: update to Git HEAD (2024-09-03)

480551a3adc4 interface: add support for disabling renew on topology change
b7b294266781 device: add more debugging code
595094f5c213 device: do not pull device present state from hotplug events
4e11e52e9b98 main: add messages to udebug regardless of their log level
091d063f4a9d wireless: handle link updates even if devices are present already
a8e90853c936 interface: improve hotplug handling reliability
cdb41673ceea device: remove redundant newlines from debug messages
cd2a7964f2c0 device: revert to explicit device_set_present calls

Signed-off-by: Felix Fietkau <nbd@nbd.name>

starfive: enable 6.6 testing kernel

starfive now supports 6.6 kernel as testing.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

starfive: refresh config-6.6

Refresh kernel config for Linux 6.6.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

starfive: add patches for 6.6

Add updated patches for 6.6. DMA/cache-handling patches
have been reworked / backported from upstream.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

kernel/starfive: Restore kernel files for v6.1

This is an automatically generated commit which aids following Kernel patch
history, as git will see the move and copy as a rename thus defeating the
purpose.

For the original discussion see:
https://lists.openwrt.org/pipermail/openwrt-devel/2023-October/041673.html

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

kernel/starfive: Create kernel files for v6.6 (from v6.1)

This is an automatically generated commit.

When doing `git bisect`, consider `git bisect --skip`.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

octeon: n821: sysupgrade for Cisco vEdge 1000

This commit adds the logic required to install OpenWrt on a
Cisco/Viptela vEdge 1000 while nicely integrating with the already
present bootloader and making it possible to roll back to stock OS.

The vEdge 1000 has a built-in SSD with a ext2 partition from which
the stock u-boot boots the Linux kernel from.

In order for Linux not to be confused about which partition the root
file system is on, there are some tricks needed to ensure the partition
is identifiable at boot time. For this we use blkid as part of the
scripts, and sfdisk as part of the manual installation process
documented on the wiki. Thus, those packages have been added as a
platform dependency. Finally, the u-boot environment is updated which
requires the use of uboot-envtools.

Tested on a Cisco vEdge 1000.

Signed-off-by: Christian Svensson <blue@cmd.nu>
Link: https://github.com/openwrt/openwrt/pull/16140
Signed-off-by: Robert Marko <robimarko@gmail.com>

ramips: mt76x8: add support for Yuncore CPE200

Yuncore CPE200 is an outdoor unit with IEEE 802.11ac radio.

Hardware:
 - SoC: MediaTek MT7628DAN (MIPS 580MHz)
 - Flash: 8 MiB Spansion S25FL064K
 - RAM: 64 MiB (built-into SoC)
 - WLAN: 5 GHz (MT7613AE)
 - Ethernet: 1x 10/100 Mbps WAN, 1x 10/100 LAN (MT7628)
 - Buttons: 1 Reset button, 2 buttons for display UI (unsupported)
 - LEDs: 4x Green (Power, LAN, WAN, WiFi)
 - Display: 4 digit 7-segment display driven by an additional
            microcontroller (unsupported)
 - Serial console: unpopulated header, 57600 8n1 (RX only)
 - Power: 12 VDC, 1 A

Installation:
The installation can be done via the recovery HTTP server which is built
into the bootloader. Hold down the reset button while connecting the
device to power and keep holding a bit more than 3 seconds. Connect to
http://192.168.0.100/ and upload sysupgrade.bin file.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

octeon: ubnt-edgerouter: fix sysupgrade config backup/restore

er is missing from platform_copy_config() and octeon_move_config(), so
config is lost on every sysupgrade.

Signed-off-by: Jakob Haufe <sur5r@sur5r.net>
Link: https://github.com/openwrt/openwrt/pull/16238
Signed-off-by: Robert Marko <robimarko@gmail.com>

uboot-mediatek: add missing dependency for mt7988_rfb-spim-nand

Signed-off-by: Felix Fietkau <nbd@nbd.name>

u-boot.mk: pass CROSS_COMPILE during config

Avoids running into unset architecture specific config symbols

Signed-off-by: Felix Fietkau <nbd@nbd.name>

uboot-mediatek: fix build error on mt7981-rfb and openwrt-one

Remove an unnecessary config option that was breaking the build

Signed-off-by: Felix Fietkau <nbd@nbd.name>

uboot-mediatek: fix broken patch

Add missing --- line

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mediatek: mt7988a-rfb: align order of SFPs with SDK build

MediaTek SDK uses eth2 as additional LAN port and eth1 as WAN.
Do the same also in OpenWrt to keep settings aligned with the SDK.

Suggested-by: Bc-bocun Chen <bc-bocun.chen@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

qoriq: enable 6.6 testing kernel

The qoriq now supports 6.6 kernel as testing.

Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/16079
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

qoriq: refresh config-6.6

Refresh kernel config for Linux 6.6.

Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/16079
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

kernel/qoriq: Restore kernel files for v6.1

This is an automatically generated commit which aids following Kernel patch
history, as git will see the move and copy as a rename thus defeating the
purpose.

For the original discussion see:
https://lists.openwrt.org/pipermail/openwrt-devel/2023-October/041673.html

Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/16079
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

kernel/qoriq: Create kernel files for v6.6 (from v6.1)

This is an automatically generated commit.

When doing `git bisect`, consider `git bisect --skip`.

Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/16079
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

kernel: bump 6.1 to 6.1.107

https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.107

All patches automatically rebased.

Build system: bcm53xx octeon

Signed-off-by: Zxl hhyccc <zxlhhy@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16283
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

kernel: bump 6.6 to 6.6.48

Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.48

Removed upstreamed:
generic/backport-6.6/752-04-v6.6-net-ethernet-mtk_wed-check-update_wo_rx_stats-in-mtk.patch[1]
generic/pending-6.6/601-udp-fix-receiving-fraglist-GSO_packets.patch[2]
mediatek/patches-6.6/951-net-ethernet-mtk_wed-fix-use-after-free-panic-in-mtk.patch[3]
rockchip/patches-6.6/302-mmc-allow-probe-to-defer-if-clock-is-not-ready.patch[4]

Manually rebased:
bcm27xx/patches-6.6/950-0058-Revert-Bluetooth-Always-request-for-user-confirmatio.patch

All other patches automatically rebased.

1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.48&id=7ede6ef04c9ffc466844a297d3d68bea8a06093d
2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.48&id=cfa692e7e71b22d35174a796d10b9111bafa0686
3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.48&id=326a89321f9d5fe399fe6f9ff7c0fc766582a6a0
4. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.48&id=7bbf8f8b8861dd2a6215f1aded425c66e6c376a0

Build system: x86/64
Build-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3
Run-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3

Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/16282
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

netfilter: add nf_conntrack_sane to kmod-nf-nathelpers-extra

'SANE' is a protocol for remote access to scanners as implemented by the
'saned' daemon. Like FTP, it uses separate control and data connections.

So let´s enable this in the kernel and add them to 'kmod-nf-nathelper-extra'.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>

netfilter: add nf_conntrack_netbios_ns to kmod-nf-nathelper-extra

NetBIOS name service requests are sent as broadcast messages from an
unprivileged port and responded to with unicast messages to the
same port. This make them hard to firewall properly because connection
tracking doesn't deal with broadcasts.

So let´s enable this in the kernel and add them to 'kmod-nf-nathelper-extra'.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>

ltq-vdsl-vr11-app: perform orderly shutdown on exit

Try to do a clean disconnection via L3 request before the connection is
stopped.

Because this might take up to 6 seconds (the driver does 3 attempts with
a timeout of 2 seconds each), a termination timeout needs to be defined
in the init script.

Signed-off-by: Jan Hoffmann <jan@3e8.eu>

ltq-vdsl-vr11-app: always disconnect on exit

Move the code for disconnection on exit to a separate function, and also
call it in the code paths for SIGINT and the "quit" CLI command.

While at it, make the patch description a bit clearer.

Signed-off-by: Jan Hoffmann <jan@3e8.eu>

ltq-vdsl-vr9-app: always disconnect on exit

Move the code for disconnection on exit to a separate function, and also
call it in the code path for the "quit" CLI command.

While at it, make the patch description a bit clearer.

Signed-off-by: Jan Hoffmann <jan@3e8.eu>

ltq-vdsl-vr11-app: fix error handling during disconnection

Use the correct return value in error message.

Fixes: 6e4c9738bed0 ("ltq-vdsl-vr11-app: add version 4.23.1 for vr11 targets")
Signed-off-by: Jan Hoffmann <jan@3e8.eu>

ltq-vdsl-vr9-app: fix error handling during disconnection

Use the correct return value in error message.

Fixes: 1daaef31b352 ("ltq-vdsl-app: disconnect when service is stopped")
Signed-off-by: Jan Hoffmann <jan@3e8.eu>

kernel: modules: usb: remove deprecated Kconfig option CONFIG_USB_XHCI_HCD_DEBUGGING

The Kconfig option 'CONFIG_USB_XHCI_HCD_DEBUGGING' has been removed with the
following commit upstream in the Linux kernel.

https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=b2497509df002e9a09c8550cd0ecd2f77c9640d8

This Kconfig option is therefore no longer valid for the kernel version
6.6 and could be removed.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>

ath79: qihoo,c301: use nvmem

Userspace handling is deprecated.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16244
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

bcm4908: drop 6.1 support

Drop config and files for Linux 6.1.

Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/16057
Signed-off-by: Robert Marko <robimarko@gmail.com>

bcm4908: use kernel 6.6 by default

Switch to Linux kernel version 6.6.

Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/16057
Signed-off-by: Robert Marko <robimarko@gmail.com>

uboot-envtools: ath79: add Belkin F9K1115v2/F9J1108v2 u-boot env support

Add support for Belkin F9K1115v2/F9J1108v2 u-boot env

Signed-off-by: Paweł Owoc <frut3k7@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16033
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

ath79: nec,wg800hp: convert to nvmem

Userspace handling is deprecated.

Unused wan mac added to dts. Requires DSA to implement.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16246
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

ath79: elecom,wab: use nvmem

Userspace handling is deprecated.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16247
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

base-files: fix merge of passwd/shadow/group lines with trailing colons

Empty trailing fields get lost when the lines are split and merged again
at colons, resulting in unparsable entries. Only use the split fields for
matching against the other file, but emit the original line unchanged
to fix the issue.

Fixes: de7ca7dafadf ("base-files: merge /etc/passwd et al at sysupgrade config restore")
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

ath79: nec,wX1200cr: use nvmem

Userspace handling is deprecated.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16245
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

kernel: set vlan mc emulation for rtl8367d family chips

Set vlan mc emulation for rtl8367d family chips

Co-authored-by: Serge Vasilugin <vasilugin@yandex.ru>
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/14804
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

kernel: set RGMII mode for rtl8367d family chips

Set RGMII mode for rtl8367d family chips

Co-authored-by: Serge Vasilugin <vasilugin@yandex.ru>
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/14804
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

kernel: set vlan mc for rtl8367d family chips

Set vlan mc for rtl8367d family chips

Co-authored-by: Serge Vasilugin <vasilugin@yandex.ru>
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/14804
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

kernel: set and get vlan 4k for rtl8367d family chips

Set and get vlan 4k for rtl8367d family chips

Co-authored-by: Serge Vasilugin <vasilugin@yandex.ru>
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/14804
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

kernel: set and get mc index for rtl8367d family chips

Set and get mc index for rtl8367d family chips

Co-authored-by: Serge Vasilugin <vasilugin@yandex.ru>
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/14804
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

kernel: set and get ports speed for rtl8367d family chips

Set and get ports speed for rtl8367d family chips

Co-authored-by: Serge Vasilugin <vasilugin@yandex.ru>
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/14804
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

kernel: rtl8367b: detect rtl8367d chip family

Detect the RTL8367D chip family and set the appropriate extif

Co-authored-by: Serge Vasilugin <vasilugin@yandex.ru>
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/14804
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

kernel: netdevices: adjust mlxsw network drivers

* Adds the x86_64 dependency for mlxsw_core

* Removes the redundant mlxsw_core dependency
from mlxsw-minimal and mlxsw-spectrum

* Removes the DCB configuration symbols because
they were moved into the generic configuration

Signed-off-by: Til Kaiser <mail@tk154.de>
Link: https://github.com/openwrt/openwrt/pull/15362
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

generic: 6.6: add missing DCB symbols

Disables Data Center Bridging support for some network drivers by
default to avoid compilation errors when CONFIG_DCB is enabled.

Signed-off-by: Til Kaiser <mail@tk154.de>
Link: https://github.com/openwrt/openwrt/pull/15362
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

linux-firmware: add firmware for all Mellanox Spectrum Switches

This commit adds the currently missing Mellanox
Spectrum-2, Spectrum-3, and Spectrum-4 firmware files.

Signed-off-by: Til Kaiser <mail@tk154.de>
Link: https://github.com/openwrt/openwrt/pull/15362
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

kernel: modules: add x86 dependency for leds-mlxcpld

This commit adds the missing x86 dependency for
the Mellanox mlxcpld LED driver.

Signed-off-by: Til Kaiser <mail@tk154.de>
Link: https://github.com/openwrt/openwrt/pull/15362
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

rockchip: add support for Radxa ROCK 3B

Radxa ROCK 3B is a Pico-ITX form factor SBC[1] using the Rockchip
RK3568(J).

Hardware
--------
- Rockchip RK3568(J) SoC
- Quad A55 CPU
- Mali-G52 GPU
- 1 TOPS @ INT8 NPU
- 2GB/4GB/8GB LPDDR4 RAM
- eMMC connector
- Micro SD Card slot
- NVMe SSD through the M.2 M Key (2-lane PCIe 3.0)
- SPI Flash for bootloader
- 2x Gigabit ethernet port (one supports PoE with add-on PoE HAT)
- 1x M.2 E Key socket with SDIO, UART and USB interfaces
- 1x M.2 B Key socket with PCIe, SATA, and USB interfaces
- 1x SIM card socket
- 1x USB 3.0 Type-A HOST port
- 1x USB 3.0 Type-A OTG port
- 2x USB 2.0 Type-A HOST ports
- 40 Pin GPIO header

[1] https://radxa.com/products/rock3/3b

Installation
------------
Uncompress the OpenWrt sysupgrade and write it to a micro SD card or
internal eMMC using dd.

Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Link: https://github.com/openwrt/openwrt/pull/16185
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

rockchip: add support for Radxa ZERO 3E and 3W

Radxa ZERO 3E and 3W are light, compact and tiny SBC[1][2] using the
Rockchip RK3566.

Hardware
--------
- Rockchip RK3566 SoC
- Quad A55 CPU
- Mali-G52-2EE GPU
- 1 TOPS @ INT8 NPU
- 1GB/2GB/4GB/8G LPDDR4 RAM
- Optional 8GB/16GB/32GB/64GB eMMC (3E)
- Micro SD Card slot
- 1x Gigabit ethernet port (supports PoE with add-on PoE HAT) (3E)
- WiFi6/BT5.4 (3W) (not supported yet on OpenWrt)
- 1x USB 3.0 Type-C HOST port
- 1x USB 2.0 Type-C OTG port
- Optional 40 Pin GPIO header

[1] https://radxa.com/products/zeros/zero3e
[2] https://radxa.com/products/zeros/zero3w

Installation
------------
Uncompress the OpenWrt sysupgrade and write it to a micro SD card or
internal eMMC using dd.

Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Link: https://github.com/openwrt/openwrt/pull/16185
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

rockchip: add support for Radxa ROCK 3C

Radxa ROCK 3C is a high-performance, low-cost SBC[1] using the
Rockchip RK3566.

Hardware
--------
- Rockchip RK3566 SoC
- Quad A55 CPU
- Mali-G52-2EE GPU
- 1 TOPS @ INT8 NPU
- 1GB/2GB/4GB LPDDR4 RAM
- eMMC connector
- Micro SD Card slot
- NVMe SSD through the M.2 M Key connector(2230) or M.2 Extension
  board(2232/2260/2280)
- SATA through the Radxa Penta SATA HAT
- 1x Gigabit ethernet port(supports PoE with add-on PoE HAT)
- WiFi6/BT5.4 (not supported yet on OpenWrt)
- 1x USB 3.0 Type-A HOST port
- 2x USB 2.0 Type-A HOST ports
- 1x USB 2.0 Type-A OTG port
- 40 Pin GPIO header

[1] https://radxa.com/products/rock3/3c

Installation
------------
Uncompress the OpenWrt sysupgrade and write it to a micro SD card or
internal eMMC using dd.

Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Link: https://github.com/openwrt/openwrt/pull/16185
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

uboot-rockchip: renumber patches

renumber patches for upcoming new device support

Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Link: https://github.com/openwrt/openwrt/pull/16185
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

tools: libtool: do not symlink files in bootstrap

Another instance of files in build_dir symlinking to staging_dir. While
the symlinks do not currently cause any bugs in the libtool package,
such symlinks were found to make the build more fragile, as writing to
the symlink may accidentally modify the shared file in staging_dir. Pass
--copy to bootstrap to disable the symlinking.

Link: https://github.com/openwrt/openwrt/pull/15825
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

include: autotools: do not symlink files in autoreconf

In Gluon's Github Actions CI, we were occasionally seeing bizarre build
errors that looked like a config.sub file had been corrupted, or changed
while it was being executed.

The cause turned out to be an interaction of the symlinks created by
autoreconf (pointing from individual tools' build dirs into
`staging_dir/host/share/automake-1.16`) and OpenWrt's host-build.mk,
which replaced config.guess and config.sub *after* autoreconf. The
result was that the replacement of these files ended up following the
symlinks and writing the files in `staging_dir/host/share/automake-1.16`
instead of a package's build dir. This could cause other packages' builds
to fail if they were currently executing the scripts while they were
being written.

To fix this, disable autoreconf's symlinking feature, so that modifying
these files in a package's build directory can't accidentally affect the
staged versions.

Link: https://github.com/openwrt/openwrt/pull/15825
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

build: fix CMake generator for non-Ninja builds

OpenWRT by default uses the Ninja generator, but some packages disable
Ninja and use the default Unix Makefiles generator. This generator can
be overridden in the user environment with `CMAKE_GENERATOR`. This patch
explicitly sets the correct generator when `PKG_USE_NINJA:=0`.

In particular, the `mt76` package uses the Makefiles generator.

Signed-off-by: Ivan Romanov <drizt72@zoho.eu>
Link: https://github.com/openwrt/openwrt/pull/16263
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

mediatek: phase out uImage.FIT partition parser

All boards using the deprecated uImage.FIT partition parser have
been migrated to the new fitblk driver. Drop the now no longer
needed partition parser.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

mediatek: filogic: convert Zyxel EX5601-T0 to fitblk

Use fitblk driver instead of deprecated partition parser.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

mediatek: filogic: convert Netcore N60 to fitblk

Use fitblk driver instead of deprecated partition parser.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

mediatek: filogic: convert Xiaomi WR30U to fitblk

Use fitblk driver instead of deprecated partition parser.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

mediatek: filogic: convert Xiaomi AX3000T to fitblk

Use fitblk driver instead of deprecated partition parser.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

mediatek: filogic: convert Qihoo 360T7 to fitblk

Use fitblk driver instead of deprecated partition parser.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

mediatek: filogic: convert JCG Q30 PRO to fitblk

Use fitblk driver instead of deprecated partition parser.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

mediatek: filogic: convert H3C Magic NX30 Pro to fitblk

Use fitblk driver instead of deprecated partition parser.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

mediatek: filogic: convert MT7981 RFB to fitblk

Use fitblk driver instead of deprecated uImage.FIT partition parser.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>