drm/i915/icl: Icelake interrupt register addresses and bits

MMIO addresses and register definition for the new interrupt
registers in Gen11.

v2: Removed spelt out VCS and VECS bit definitions. (Daniel Vetter)
v3: Adjust VCS and VECS. (Daniele Ceraolo Spurio)
v4: Bikeshedding (Paulo).

Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180109232336.11029-5-paulo.r.zanoni@intel.com

drm/i915/icp: Add the ID for ICL PCH - ICP

Add the PCI ID for the ICL PCH - ICP.

v2: rebased.
v3: rebased.
v4: fix ICP name.
v5: fix the ID mask (Fei Li).
v6 (from Paulo): bikesheds.

Cc: Li, Fei <fei.li@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180111180010.24357-9-paulo.r.zanoni@intel.com

drm/i915/icp: add ICP gmbus and gpio support

In ICP, there are three TC ports and 3 DDI ports.

v2:
 - Correct Pin mapping.
v3:
 - Update pin mapping into per platform implementation
   rather than previous approach of port wise mapping.
v4:
 - Update GMBUS_NUM_PINS (Paulo)
v5:
 - rebase.
v6:
 - Update function name, GMBUS_PIN_NUM (Paulo)
v7 (from Paulo):
 - Make it apply.
v8 (from Paulo):
 - Maintain consistent if ladder ordering.

Suggested by: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180111180010.24357-8-paulo.r.zanoni@intel.com

drm/i915/icp: Add backlight Support for ICP

ICP has two backlight controllers - similar to previous platforms like
BXT -, but we only use one controller for now, so we can just reuse
the CNP code.

v2: Remove the usage of ICP_SECOND_PPS_BACKLIGHT register.(Jani)
Reuse CNP code since it is very similar.(Ville)
v3 (from Paulo): Rebase.
v4 (from Paulo): adjust commit message (James) and comment (Rodrigo).

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: James Ausmus <james.ausmus@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180119184812.2888-1-paulo.r.zanoni@intel.com
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>

drm/i915/icp: Add Panel Power Sequencing Support

ICP, like BXT, has has two panel power sequencers.

v2: Simplify the code. Remove unwanted register definitions.
Make code as close to BXT style as possible. (Ville)
Also, remove the use of ICP_SECOND_PPS_BACKLIGHT for now.
Moving forward, if we are sure we need to set this register,
we can access it.

v3: Use INTEL_GEN(dev_priv), make code more readeable. (Ville)

v4 (from Paulo):
 - Coding style fixes.
 - Add a missing HAS_PCH_CNP -> gen10+ check.
 - Rebase.

v5: Use per platform checks rather than INTEL_GEN().
    v4 of this patch breaks on CoffeeLake, since CFL uses
    CNP and per platform check makes sense in that case.

v6 (from Paulo):
 - v5 was a patch on top of v4, not a new version. Now v6 is correctly
   a new version of the original patch.

Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180111180010.24357-6-paulo.r.zanoni@intel.com

drm/i915/icp: Get/set proper Raw clock frequency on ICP

Add register definitions for setting the rawclock.
Set the numerator,denominator and divider values.

v2: Simplify the commit message. Simplify the math.
Add  register bits for numerator. (Paulo)
v3 (from Paulo): coding style bikesheds.

Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180111180010.24357-5-paulo.r.zanoni@intel.com

drm/i915/icp: Introduce Ice Lake PCH

Add the enum additions to ICP PCH.

v2 (from Paulo): don't set any platforms to it yet since ICP support is
incomplete.
v3 (from Rodrigo): Fix ICP name.

Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180111180010.24357-4-paulo.r.zanoni@intel.com

drm/i915/icl: Add initial Icelake definitions.

Icelake is an Intel® Processor containing an Intel® Graphics
Controller.

This is just an initial Icelake definition. PCI IDs, Icelake support
and new features coming in following patches.

v2: Add .ddb_size and .has_guc (Michal Wajdeczko).
v3: Add the ICL_FEATURES macro (Kelvin Gardiner).
v4 (from Paulo): Add missing __initconst (Paulo) and say "graphics
controller" instead of something that looks like an official marketing
name but isn't (Chris).

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180111180010.24357-3-paulo.r.zanoni@intel.com

drm/i915/cnl: Add Port F definition.

Some Cannonlake SKUs will come with a full split between
port A and port E. This will be called port F although it
is not a 6th port, but only a split.

Note this patch alone is not sufficient for port F enabling,
it's just the first step.

v2: Fix size of dvo_ports found by Ander.
v3: Adding missing cases from intel_bios.c for Port_F
v4: Adding other missing cases and fix the commit message.
v5: Rebase on top of display headers rework.
v6 (from Paulo): improve commit message, bikeshed bit definitions.

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180111180010.24357-2-paulo.r.zanoni@intel.com

drm/i915: Check for fused or unused pipes

We may have fused or unused pipes in our system. Let's check that the pipe
in question is within limits of accessible pipes. In case, that we are not
able to access the pipe, we return early with a warning.

v2: Rephrasing of the commit message (Jani)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103206
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jaswinder Singh Rajput <jaswinder@perfectintelligent.com>
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1513584243-12607-1-git-send-email-mika.kahola@intel.com

drm/i915: Allow up to 32KB stride on SKL+ "sprites"

SKL+ "sprites" no longer have 16KB max stride limit that earlier
platforms had. Bump up the limit to 32KB.

Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Stone <daniels@collabora.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171222192231.17981-7-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Add CCS capability for sprites

Allow sprites to scan out compressed framebuffers.

Since different platforms have a different set of planes that
support CCS let's add a small helper to determine whether a
specific plane supports CCS or not. Currently that information
is spread around in many places, and not all the pieces of
code even agree with each other.

In addition to allowing sprites to scan out compressed fbs,
the other fix here is that we stop rejecting them on pipe C
on CNL.

Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Stone <daniels@collabora.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171222192231.17981-6-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>

drm/i915: Clean up the sprite modifier checks

Split the g4x and snb cases into separate functions to match how we deal
with all other platforms. Also sort the switch cases to match the format
lists we've declared earlier, to ease comparisons.

Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Stone <daniels@collabora.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171222192231.17981-5-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Add the missing Y/Yf modifiers for SKL+ sprites

Y/Yf were dropped out from the SKL+ sprite modifier list on account
of some watermark issues Daniel Stone was having. My subsequent testing
seemed to indicate that things work better now, so add the modifiers
back in.

v2: Update the commit message with a better explanation

Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Stone <daniels@collabora.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171222192231.17981-4-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Nuke a pointless unreachable()

The unreachable() is very much unreachable and the compiler knows
that, so there's no point in having it.

Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Stone <daniels@collabora.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171222192231.17981-3-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Ignore TMDS clock limit for DP++ when EDID override is set

4K modes testing by using dummy EDID data has never been working
properly on boxes with DP++ (dual-mode) adaptors. The reason for
this is that those modes got pruned during hdmi mode validation.
intel_hdmi_mode_valid returns CLOCK_HIGH because the pixel clock
reported by the 4k mode is higher than dual port TMDS clock limit.

However 4k injection does work properly on machines that don't have
DP++ adapters because the mode is never validated against the DP++
TMDS clock limit.

v2: Don't detect the DP++ limits when we're testing using overridden
    EDIDs. Make sure to check for the override condition after
    respecting the value of drm_dp_dual_mode_detect (Jani Nikula).

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101649
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171215102055.11729-1-abdiel.janulgue@linux.intel.com

drm/i915: remove redundant ELD connector type update

drm_edid_to_eld() sets ELD connector type since commit 1d1c36650752
("drm/edid: set ELD connector type in drm_edid_to_eld()"). Remove the
redundant update.

(Commit c945b8c14bb7 ("drm/edid: build ELD in drm_add_edid_modes()") and
commit d471ed04b487 ("drm/drivers: drop redundant drm_edid_to_eld()
calls") are also related.)

v2: Rebase, update commit message with commit references.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171229125547.28672-1-jani.nikula@intel.com

drm/i915: vbt defs typo fixes

No more sing-a-ling.

Reported-by: Adam Jackson <ajax@redhat.com>
You're-my-ding-a-ling-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180118150613.26140-1-jani.nikula@intel.com

drm/i915/bios: add DP max link rate to VBT child device struct

Update VBT defs to reflect revision 216. While at it, default the
expected child device struct size to sizeof the size rather than a
hardcoded value.

v2: Fix bit order (David)

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180118153310.32437-1-jani.nikula@intel.com

drm/i915/cnl: apply Display WA #1178 to fix type C dongles

Display WA #1178 is meant to fix Aux channel voltage swing too low with
some type C dongles. Although it is for type C, HW engineers reported
that it can be applied to all external ports even if they are not going
to type C.

For CNL we apply the workaround every time Aux B, C and D are powering
up since they will lose the configuration when powered down.

v2: Use common tag for WA

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Arthur J Runyan <arthur.j.runyan@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171128220553.22435-1-lucas.demarchi@intel.com

drm/i915: Use the engine name directly in the error_state file

Instead of using local string names that we will have to keep
maintaining, use the engine->name directly.

v2: Better invalid engine_id handling, capture_bo will not be able know
the engine_id and end up with -1 (Michal).

Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180110012151.28261-1-michel.thierry@intel.com
[ickle: minor massaging of function names]
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180118175228.2830-1-chris@chris-wilson.co.uk

drm/i915/guc: Change values for i915_guc_log_control

Today we have format mismatch between read/write operations
of i915_guc_log_control entry. For read we return (0, 1..4)
that represents disable/verbosity levels, but for write we
force user to follow internal structure format (0,1,9,11,13).
Let's hide internals from the user and accept same values
as we support for read and related guc_log_level modparam.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180111152441.21676-2-michal.wajdeczko@intel.com
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/guc: Redefine guc_log_level modparam values

We used value -1 to indicate "disabled" and values 0..3 to
indicate "enabled", but most of our other modparams are using
-1 for "auto" mode and 0 for "disable". For consistency let's
change our log level values to:

-1: auto (depends on platform and Kconfig.debug settings)
 0: disabled
 1: enabled (severity level 0 = min)
 2: enabled (severity level 1)
 3: enabled (severity level 2)
 4: enabled (severity level 3 = max)

v2: fix commit message (Sagar)
    display sanitized modparam value (Sagar)
    unify sanitize messages (Sagar/Michal)

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180111152441.21676-1-michal.wajdeczko@intel.com
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Avoid waitboosting on the active request

Watching a light workload on Baytrail (running glxgears and a 1080p
decode), instead of the system remaining at low frequency, the glxgears
would regularly trigger waitboosting after which it would have to spend
a few seconds throttling back down. In this case, the waitboosting is
counter productive as the minimal wait for glxgears doesn't prevent it
from functioning correctly and delivering frames on time. In this case,
glxgears happens to almost always be waiting on the current request,
which we already expect to complete quickly (see i915_spin_request) and
so avoiding the waitboost on the active request and spinning instead
provides the best latency without overcommitting to upclocking.
However, if the system falls behind we still force the waitboost.
Similarly, we will also trigger upclocking if we detect the system is
not delivering frames on time - again using a mechanism that tries to
detect a miss and not preemptively upclock.

v2: Also skip boosting for after missed vblank if the desired request is
already active.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180118131609.16574-1-chris@chris-wilson.co.uk

drm/i915: Add tracking for CDCLK bypass frequency

The CDCLK bypass frequency can vary on upcoming platforms, so prepare
for that now by tracking its value in the CDCLK state.

Currently on BDW+ the bypass frequency is always the reference clock and
I didn't bother with earlier platforms since it's not all that clear
what's the bypass clock on those.

I also didn't bother adding support for changing this frequency, since
atm I don't see any need for it.

Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180117172508.15993-1-imre.deak@intel.com

drm/i915: Only attempt to scan the requested number of shrinker slabs

Since commit 4e773c3a8a69 ("drm/i915: Wire up shrinkctl->nr_scanned"),
we track the number of objects we scan and do not wish to exceed that as
it will overly penalise our own slabs under mempressure. Given that we
now know the target number of objects to scan, use that as our guide for
deciding to shrink as opposed to the number of objects we manage to
shrink (which doesn't correspond to the numbers we report to shrinkctl).

Fixes: 4e773c3a8a69 ("drm/i915: Wire up shrinkctl->nr_scanned")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180115212455.24046-2-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm: i915: remove timeval users

struct timeval is deprecated because it cannot represent times
past 2038. In this driver, the only use of this structure is
to capture debug information. This is easily changed to ktime_t,
which we then format as needed when printing it later.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180117154916.219273-1-arnd@arndb.de
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/selftests: Wait for the dma-fence timeout

When testing that the timeout fired, we need to be sure we have waited
just long enough for the timeout to have occurred and for the softirq
(on another cpu) to have completed. Sleeping for an arbitrary amount is
prone to error, so wait for the timeout instead and complain if it was
too late.

v2: Use wait_event_timeout to provide an upper bound
v3: Fix inverted check for wait_event_timeout timing out
v4: Restore the check that the fences aren't signalled too early, by
inspecting them before the expected timeout.

References: https://bugs.freedesktop.org/show_bug.cgi?id=104670
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180117135713.2324-1-chris@chris-wilson.co.uk

drm/i915: Do not WARN_ON with small framebuffers.

It's perfectly legal to create a fb with stride < 512, and one of
the kms_plane_scaling subtests creates a very small fb.

Downgrade the WARN_ON to a simple check check, and because this
function is potentially called on every atomic update/pageflip,
downgrade the other WARN_ON to a WARN_ON_ONCE, and do the right
thing here.

Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180116155331.75175-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Always call to intel_display_set_init_power() in resume_early.

intel_power_domains_init_hw() calls set_init_power, but when using
runtime power management this call is skipped. This prevents hw readout
from taking place.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104172
Link: https://patchwork.freedesktop.org/patch/msgid/20180116155324.75120-1-maarten.lankhorst@linux.intel.com
Fixes: bc87229f323e ("drm/i915/skl: enable PC9/10 power states during suspend-to-idle")
Cc: Nivedita Swaminathan <nivedita.swaminathan@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Patrik Jakobsson <patrik.jakobsson@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: <stable@vger.kernel.org> # v4.5+
Reviewed-by: Imre Deak <imre.deak@intel.com>

drm/i915: Rewrite some comments around RCU-deferred object free

Tvrtko noticed that the comments describing the interaction of RCU and
the deferred worker for freeing drm_i915_gem_object were a little
confusing, so attempt to bring some sense to them.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180115205759.13884-1-chris@chris-wilson.co.uk

drm/i915/selftests: Test i915_sw_fence/dma_fence interop

Check that we can successfully wait upon a dma_fence using the
i915_sw_fence, including the optional timeout mechanism.

v2: Account for the rounding up of the timeout to the next second.
Unfortunately, the minimum delay is then 1 second.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180115204348.8480-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: Use our singlethreaded wq for freeing objects

As freeing the objects require serialisation on struct_mutex, we should
prefer to use our singlethreaded driver wq that is dedicated to work
requiring struct_mutex (hence serialised).The benefit should be less
clutter on the system wq, allowing it to make progress even when the
driver/struct_mutex is heavily contended.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180115122846.15193-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: Lock out execlist tasklet while peeking inside for busy-stats

In order to prevent a race condition where we may end up overaccounting
the active state and leaving the busy-stats believing the GPU is 100%
busy, lock out the tasklet while we reconstruct the busy state. There is
no direct spinlock guard for the execlists->port[], so we need to
utilise tasklet_disable() as a synchronous barrier to prevent it, the
only writer to execlists->port[], from running at the same time as the
enable.

Fixes: 4900727d35bb ("drm/i915/pmu: Reconstruct active state on starting busy-stats")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180115092041.13509-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915/fence: Separate timeout mechanism for awaiting on dma-fences

As the timeout mechanism has grown more and more complicated, using
multiple deferred tasks and more than doubling the size of our struct,
split the two implementations to streamline the simpler no-timeout
callback variant.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180115090643.26696-2-chris@chris-wilson.co.uk

drm/i915: Only defer freeing of fence callback when also using the timer

Without an accompanying timer (for internal fences), we can free the
fence callback immediately as we do not need to employ the RCU barrier
to serialise with the timer. By avoiding the RCU delay, we can avoid the
extra mempressure under heavy inter-engine request utilisation.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180115090643.26696-1-chris@chris-wilson.co.uk

drm/i915/psr: Avoid initializing PSR if there is no sink support.

DPCD read for the eDP is complete by the time intel_psr_init() is
called, which means we can avoid initializing PSR structures and state
if there is no sink support.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180103213824.1405-3-dhinakaran.pandiyan@intel.com

drm/i915/psr: CAN_PSR() macro to check for PSR source and sink support.

The global variable dev_priv->psr.sink_support is set if an eDP sink
supports PSR. Use this instead of redoing the check with is_edp_psr().
Combine source and sink support checks into a macro that can be used to
return early from psr_{invalidate, single_frame_update, flush}.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180103213824.1405-2-dhinakaran.pandiyan@intel.com

drm/i915/psr: Kill psr.source_ok flag.

This flag has become redundant since
commit 4d90f2d507ab ("drm/i915: Start tracking PSR state in crtc state")
It is set at the same place as psr.enabled, which is also exposed via
debugfs.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180103213824.1405-1-dhinakaran.pandiyan@intel.com

drm/i915/pmu: Use kcalloc instead of kzalloc

kcalloc is preffered for allocating arrays.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180112170340.5387-2-tvrtko.ursulin@linux.intel.com

drm/i915/pmu: fix noderef.cocci warnings

drivers/gpu/drm/i915/i915_pmu.c:795:34-40: ERROR: application of sizeof to pointer

 sizeof when applied to a pointer typed expression gives the size of
 the pointer

Generated by: scripts/coccinelle/misc/noderef.cocci

Fixes: 109ec558370f ("drm/i915/pmu: Only enumerate available counters in sysfs")
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180112170340.5387-1-tvrtko.ursulin@linux.intel.com

drm/i915/pmu: Reconstruct active state on starting busy-stats

We have a hole in our busy-stat accounting if the pmu is enabled during
a long running batch, the pmu will not start accumulating busy-time
until the next context switch. This then fails tests that are only
sampling a single batch.

v2: Count each active port just once (context in/out events are only on
the first and last assignment to a port).
v3: Avoid hardcoding knowledge of 2 submission ports

Fixes: 30e17b7847f5 ("drm/i915: Engine busy time tracking")
Testcase: igt/perf_pmu/busy-start
Testcase: igt/perf_pmu/busy-double-start
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180111073031.14614-1-chris@chris-wilson.co.uk

drm/i915/pmu: Initialise our dynamic sysfs attributes for use with lockdep

As we kmalloc our dynamic sysfs attributes, we have to give them an
external static lock_class_key for them to use with lockdep.

Fixes: 109ec558370f ("drm/i915/pmu: Only enumerate available counters in sysfs")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180111140402.3984-1-chris@chris-wilson.co.uk

drm/i915/pmu: Only enumerate available counters in sysfs

Switch over to dynamically creating device attributes, which are in turn
used by the perf core to expose available counters in sysfs.

This way we do not expose counters which are not avaiable on the current
platform, and are so more consistent between what we reply to open
attempts via the perf_event_open(2), and what is discoverable in sysfs.

v2:
 * Simplify attribute pointer freeing loop.
 * Changed attr init from macro to function.
 * More common error unwind. (Chris Wilson)
 * Rename some locals. (Chris Wilson)

v3:
 * Fixed double semi-colon. (Chris Wilson)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180111083525.32394-1-tvrtko.ursulin@linux.intel.com

drm/i915: Apply headless DMC workaround for CNL

With firmware 1.07 having fixed the state corruption issue, we can enable
the headless GT performance workaround for CNL as well. (Equivalent to
b68763741aa2 ("drm/i915: Restore GT performance in headless mode with DMC
loaded") on other affected platforms.)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100572
Testcase: igt/gem_exec_nop/headless
Cc: Imre Deak <imre.deak@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180111082417.795-1-tvrtko.ursulin@linux.intel.com

drm/i915: Stop getting the fault address from RING_FAULT_REG

This register does not contain it. Instead, we have to look into FAULT_TLB_DATA0 & 1
(where, by the way, we can also get the address space).

v2: Right formatting
v3:
  - Use 12 (as per the register format) instead of PAGE_SIZE (Chris)
  - s/BITS_44_TO_47/HIGHBITS (Chris)
  - Right formatting, this time for real

Fixes: b03ec3d67ab8 ("drm/i915: There is only one fault register from GEN8 onwards")
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1513982329-32191-1-git-send-email-oscar.mateo@intel.com
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/guc: Add uc_fini_wq in gem_init unwind path

While moving code around for solving lockdep issue for GuC log relay,
spotted that uc_fini_wq is not being called in failure path in gem_init.
Missed in the below commit. Add it.

v2: Removed GEM_BUG_ON(!HAS_GUC()) from intel_uc_fini_wq as init happens
only based on enable_guc module parameter and does not consider has_guc
capability. (Michal)

Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Fixes: 3176ff49bc3e ("drm/i915/guc: Move GuC workqueue allocations outside of the mutex")
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1515588857-10283-1-git-send-email-sagar.a.kamble@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Fix using BIT_ULL() vs. BIT() for power domain masks

The power domain masks are 64 bit wide, so we need BIT_ULL() when
setting bits in them, these ones were missed during converting from 32
to 64 bit masks. All 3 enums are <32 atm, so this didn't cause a real
problem.

Fixes: d8fc70b7367b ("drm/i915: Make power domain masks 64 bit long")
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180109122040.19425-1-imre.deak@intel.com

drm/i915: Try EDID bitbanging on HDMI after failed read

The ACK/NACK implementation as found in e.g. the G965 has the falling
clock edge and the release of the data line after the ACK for the received
byte happen at the same time.

This is conformant with the I2C specification, which allows a zero hold
time, see footnote [3]: "A device must internally provide a hold time of
at least 300 ns for the SDA signal (with respect to the V IH(min) of the
SCL signal) to bridge the undefined region of the falling edge of SCL."

Some HDMI-to-VGA converters apparently fail to adhere to this requirement
and latch SDA at the falling clock edge, so instead of an ACK
sometimes a NACK is read and the slave (i.e. the EDID ROM) ends the
transfer.

The bitbanging releases the data line for the ACK only 1/4 bit time after
the falling clock edge, so a slave will see the correct value no matter
if it samples at the rising or the falling clock edge or in the center.

Fallback to bitbanging is already done for the CRT connector.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92685
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/a39f080b-81a5-4c93-b3f7-7cb0a58daca3@rwthex-w2-a.rwth-ad.de

drm/i915: Don't adjust priority on an already signaled fence

When we retire a signaled fence, we free the dependency tree. However,
we skip clearing the list so that if we then try to adjust the priority
of the signaled fence, we may walk the list of freed dependencies.

[ 3083.156757] ==================================================================
[ 3083.156806] BUG: KASAN: use-after-free in execlists_schedule+0x199/0x660 [i915]
[ 3083.156810] Read of size 8 at addr ffff8806bf20f400 by task Xorg/831

[ 3083.156815] CPU: 0 PID: 831 Comm: Xorg Not tainted 4.15.0-rc6-no-psn+ #1
[ 3083.156817] Hardware name: Notebook                         N24_25BU/N24_25BU, BIOS 5.12 02/17/2017
[ 3083.156818] Call Trace:
[ 3083.156823]  dump_stack+0x5c/0x7a
[ 3083.156827]  print_address_description+0x6b/0x290
[ 3083.156830]  kasan_report+0x28f/0x380
[ 3083.156872]  ? execlists_schedule+0x199/0x660 [i915]
[ 3083.156914]  execlists_schedule+0x199/0x660 [i915]
[ 3083.156956]  ? intel_crtc_atomic_check+0x146/0x4e0 [i915]
[ 3083.156997]  ? execlists_submit_request+0xe0/0xe0 [i915]
[ 3083.157038]  ? i915_vma_misplaced.part.4+0x25/0xb0 [i915]
[ 3083.157079]  ? __i915_vma_do_pin+0x7c8/0xc80 [i915]
[ 3083.157121]  ? intel_atomic_state_alloc+0x44/0x60 [i915]
[ 3083.157130]  ? drm_atomic_helper_page_flip+0x3e/0xb0 [drm_kms_helper]
[ 3083.157145]  ? drm_mode_page_flip_ioctl+0x7d2/0x850 [drm]
[ 3083.157159]  ? drm_ioctl_kernel+0xa7/0xf0 [drm]
[ 3083.157172]  ? drm_ioctl+0x45b/0x560 [drm]
[ 3083.157211]  i915_gem_object_wait_priority+0x14c/0x2c0 [i915]
[ 3083.157251]  ? i915_gem_get_aperture_ioctl+0x150/0x150 [i915]
[ 3083.157290]  ? i915_vma_pin_fence+0x1d8/0x320 [i915]
[ 3083.157331]  ? intel_pin_and_fence_fb_obj+0x175/0x250 [i915]
[ 3083.157372]  ? intel_rotation_info_size+0x60/0x60 [i915]
[ 3083.157413]  ? intel_link_compute_m_n+0x80/0x80 [i915]
[ 3083.157428]  ? drm_dev_printk+0x1b0/0x1b0 [drm]
[ 3083.157443]  ? drm_dev_printk+0x1b0/0x1b0 [drm]
[ 3083.157485]  intel_prepare_plane_fb+0x2f8/0x5a0 [i915]
[ 3083.157527]  ? intel_crtc_get_vblank_counter+0x80/0x80 [i915]
[ 3083.157536]  drm_atomic_helper_prepare_planes+0xa0/0x1c0 [drm_kms_helper]
[ 3083.157587]  intel_atomic_commit+0x12e/0x4e0 [i915]
[ 3083.157605]  drm_atomic_helper_page_flip+0xa2/0xb0 [drm_kms_helper]
[ 3083.157621]  drm_mode_page_flip_ioctl+0x7d2/0x850 [drm]
[ 3083.157638]  ? drm_mode_cursor2_ioctl+0x10/0x10 [drm]
[ 3083.157652]  ? drm_lease_owner+0x1a/0x30 [drm]
[ 3083.157668]  ? drm_mode_cursor2_ioctl+0x10/0x10 [drm]
[ 3083.157681]  drm_ioctl_kernel+0xa7/0xf0 [drm]
[ 3083.157696]  drm_ioctl+0x45b/0x560 [drm]
[ 3083.157711]  ? drm_mode_cursor2_ioctl+0x10/0x10 [drm]
[ 3083.157725]  ? drm_getstats+0x20/0x20 [drm]
[ 3083.157729]  ? timerqueue_del+0x49/0x80
[ 3083.157732]  ? __remove_hrtimer+0x62/0xb0
[ 3083.157735]  ? hrtimer_try_to_cancel+0x173/0x210
[ 3083.157738]  do_vfs_ioctl+0x13b/0x880
[ 3083.157741]  ? ioctl_preallocate+0x140/0x140
[ 3083.157744]  ? _raw_spin_unlock_irq+0xe/0x30
[ 3083.157746]  ? do_setitimer+0x234/0x370
[ 3083.157750]  ? SyS_setitimer+0x19e/0x1b0
[ 3083.157752]  ? SyS_alarm+0x140/0x140
[ 3083.157755]  ? __rcu_read_unlock+0x66/0x80
[ 3083.157757]  ? __fget+0xc4/0x100
[ 3083.157760]  SyS_ioctl+0x74/0x80
[ 3083.157763]  entry_SYSCALL_64_fastpath+0x1a/0x7d
[ 3083.157765] RIP: 0033:0x7f6135d0c6a7
[ 3083.157767] RSP: 002b:00007fff01451888 EFLAGS: 00003246 ORIG_RAX: 0000000000000010
[ 3083.157769] RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007f6135d0c6a7
[ 3083.157771] RDX: 00007fff01451950 RSI: 00000000c01864b0 RDI: 000000000000000c
[ 3083.157772] RBP: 00007f613076f600 R08: 0000000000000001 R09: 0000000000000000
[ 3083.157773] R10: 0000000000000060 R11: 0000000000003246 R12: 0000000000000000
[ 3083.157774] R13: 0000000000000060 R14: 000000000000001b R15: 0000000000000060

[ 3083.157779] Allocated by task 831:
[ 3083.157783]  kmem_cache_alloc+0xc0/0x200
[ 3083.157822]  i915_gem_request_await_dma_fence+0x2c4/0x5d0 [i915]
[ 3083.157861]  i915_gem_request_await_object+0x321/0x370 [i915]
[ 3083.157900]  i915_gem_do_execbuffer+0x1165/0x19c0 [i915]
[ 3083.157937]  i915_gem_execbuffer2+0x1ad/0x550 [i915]
[ 3083.157950]  drm_ioctl_kernel+0xa7/0xf0 [drm]
[ 3083.157962]  drm_ioctl+0x45b/0x560 [drm]
[ 3083.157964]  do_vfs_ioctl+0x13b/0x880
[ 3083.157966]  SyS_ioctl+0x74/0x80
[ 3083.157968]  entry_SYSCALL_64_fastpath+0x1a/0x7d

[ 3083.157971] Freed by task 831:
[ 3083.157973]  kmem_cache_free+0x77/0x220
[ 3083.158012]  i915_gem_request_retire+0x72c/0xa70 [i915]
[ 3083.158051]  i915_gem_request_alloc+0x1e9/0x8b0 [i915]
[ 3083.158089]  i915_gem_do_execbuffer+0xa96/0x19c0 [i915]
[ 3083.158127]  i915_gem_execbuffer2+0x1ad/0x550 [i915]
[ 3083.158140]  drm_ioctl_kernel+0xa7/0xf0 [drm]
[ 3083.158153]  drm_ioctl+0x45b/0x560 [drm]
[ 3083.158155]  do_vfs_ioctl+0x13b/0x880
[ 3083.158156]  SyS_ioctl+0x74/0x80
[ 3083.158158]  entry_SYSCALL_64_fastpath+0x1a/0x7d

[ 3083.158162] The buggy address belongs to the object at ffff8806bf20f400
                which belongs to the cache i915_dependency of size 64
[ 3083.158166] The buggy address is located 0 bytes inside of
                64-byte region [ffff8806bf20f400, ffff8806bf20f440)
[ 3083.158168] The buggy address belongs to the page:
[ 3083.158171] page:00000000d43decc4 count:1 mapcount:0 mapping:          (null) index:0x0
[ 3083.158174] flags: 0x17ffe0000000100(slab)
[ 3083.158179] raw: 017ffe0000000100 0000000000000000 0000000000000000 0000000180200020
[ 3083.158182] raw: ffffea001afc16c0 0000000500000005 ffff880731b881c0 0000000000000000
[ 3083.158184] page dumped because: kasan: bad access detected

[ 3083.158187] Memory state around the buggy address:
[ 3083.158190]  ffff8806bf20f300: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[ 3083.158192]  ffff8806bf20f380: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[ 3083.158195] >ffff8806bf20f400: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[ 3083.158196]                    ^
[ 3083.158199]  ffff8806bf20f480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[ 3083.158201]  ffff8806bf20f500: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[ 3083.158203] ==================================================================

Reported-by: Alexandru Chirvasitu <achirvasub@gmail.com>
Reported-by: Mike Keehan <mike@keehan.net>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104436
Fixes: 1f181225f8ec ("drm/i915/execlists: Keep request->priority for its lifetime")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Alexandru Chirvasitu <achirvasub@gmail.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Tested-by: Alexandru Chirvasitu <achirvasub@gmail.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180106105618.13532-1-chris@chris-wilson.co.uk

drm/i915: Whitelist SLICE_COMMON_ECO_CHICKEN1 on Geminilake.

Geminilake requires the 3D driver to select whether barriers are
intended for compute shaders, or tessellation control shaders, by
whacking a "Barrier Mode" bit in SLICE_COMMON_ECO_CHICKEN1 when
switching pipelines.  Failure to do this properly can result in GPU
hangs.

Unfortunately, this means it needs to switch mid-batch, so only
userspace can properly set it.  To facilitate this, the kernel needs
to whitelist the register.

The workarounds page currently tags this as applying to Broxton only,
but that doesn't make sense.  The documentation for the register it
references says the bit userspace is supposed to toggle only exists on
Geminilake.  Empirically, the Mesa patch to toggle this bit appears to
fix intermittent GPU hangs in tessellation control shader barrier tests
on Geminilake; we haven't seen those hangs on Broxton.

v2: Mention WA #0862 in the comment (it doesn't have a name).

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180105085905.9298-1-kenneth@whitecape.org

drm/i915/dmc: DMC 1.07 for Cannonlake

There is a new version of DMC available for CNL.

The release notes mentions:
1. Fix for the issue where DC_STATE was getting enabled
even when disabled by driver causing data corruption

v2: Since the firmware is  merged to linux-firmware.git,
add MODULE_FIRMWARE.

v3: rebased. Correct commit message(Jani)

Cc: Jani Saarinen <jani.saarinen@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1515109902-14076-1-git-send-email-anusha.srivatsa@intel.com

drm/i915/glk: Disable Guc and HuC on GLK

Since the firmwares are not yet released to public repo,
disable them on Geminilake.

v2: Remove the firmware versions (Michal)

v3: Remove unwanted defines (Rodrigo)
Correct commit message (Michal)

Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Fixes: 90f192c8241e ("drm/i915/GuC/GLK: Load GuC on GLK")
Fixes: db5ba0d8931e ("drm/i915/GLK/HuC: Load HuC on GLK")
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1515006225-13003-1-git-send-email-anusha.srivatsa@intel.com

drm/i915: Pass DMA_ATTR_NO_WARN to dma_map_sg()

In some iommu, e.g. swiotlb, the available space can be quite limited.
So we employ a trial-and-error approach to seeing if our large
contiguous chunks can fit, and if that fails we try again with smaller
chunks after trying to free our own lazily allocated blobs. As we use a
trial-and-error approach, we do not want dma_map_sg() to emit a WARN of
its own accord, we want to gracefully report the error back to the caller
instead.

Note that our noisy culprit, swiotlb, doesn't honour the flag, yet.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180104163842.11635-1-chris@chris-wilson.co.uk

drm/i915: Assert we do not try to wait on an invalid seqno

We should never insert the invalid seqno into the wait tree, so assert
we do not.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180102192500.20364-1-chris@chris-wilson.co.uk

drm/i915/guc : GEM_BUG_ON on invoking GuC reset function

Instead of returning -EINVAL, GEM_BUG_ON when GuC reset is invoked for
platforms not supporting as we don't expect to invoke it.

v2: re-wording commit message and subject (Sagar)

Signed-off-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1514928025-29659-2-git-send-email-sujaritha.sundaresan@intel.com

drm/i915/guc : Decoupling ADS and logs from submission

The Additional Data Struct (ADS) contains objects that are required by
GuC post FW load and are not necessarily submission-only. Even with
submission disabled we may require something inside the ADS, so it
makes more sense for them to be always created.

Similarly, we need to access GuC logs and even if GuC submission
is disabled, to debug issues with GuC loading or with whatever we're using
GuC for.

v2: re-wording commit message (Sagar)

Signed-off-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1514928025-29659-1-git-send-email-sujaritha.sundaresan@intel.com

drm/i915/execlists: Reduce list_for_each_safe+list_safe_reset_next

After staring at the list_for_each_safe macros for a bit, our current
invocation of list_safe_reset_next in execlists_schedule() simply
reduces to list_for_each.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180102151235.3949-11-chris@chris-wilson.co.uk

drm/i915/execlists: Assert there are no simple cycles in the dependencies

The dependency chain must be an acyclic graph. This is checked by the
swfence, but for sanity, also do a simple check that we do not corrupt
our list iteration in execlists_schedule() by a shallow dependency
cycle.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180102151235.3949-10-chris@chris-wilson.co.uk

drm/i915: Assert all signalers we depended on did indeed signal

Back up our comment that all signalers should have been signaled before
we ourselves were retired with an assert to that effect.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180102151235.3949-9-chris@chris-wilson.co.uk

drm/i915: Hold rpm wakeref for modifying the global seqno

To modify the global seqno may require rewriting a few registers, which
requires us to hold the rpm wakeref. We must therefore take it around
the call to i915_gem_set_global_seqno() in debugfs, on behalf of the
user.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180102151235.3949-15-chris@chris-wilson.co.uk

drm/i915/execlists: Tidy enabling execlists

Move the register settings for enabling execlists into its own function
for clarity.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180102151235.3949-18-chris@chris-wilson.co.uk

drm/i915/execlists: Record elsp offset during engine setup

Currently, we record the elsp register offset inside init-hw but we only
need to do it once during engine setup (after we know the mmio
iomapping).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180102151235.3949-17-chris@chris-wilson.co.uk

drm/i915/execlists: Clear context-switch interrupt earlier in the reset

Move the clearing of the CS-interrupt into the engine reset phase,
before the current init-hw phase. This helps clarify that we clear the
pending interrupts prior to any restarting of the execlists.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180102151235.3949-16-chris@chris-wilson.co.uk

drm/i915: Delete defunct i915_gem_request_assign()

i915_gem_request_assign() is not used since commit 77f0d0e925e8
("drm/i915/execlists: Pack the count into the low bits of the
port.request"), so remove the defunct code

References: 77f0d0e925e8 ("drm/i915/execlists: Pack the count into the low bits of the port.request")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180102151235.3949-1-chris@chris-wilson.co.uk

drm/i915/selftests: Allow random array allocation to fail

In the selftests, we don't want to force an oom and would rather
ENOMEM be reported. In this case, we would rather the allocation for the
random array to fail.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171223110407.21402-2-chris@chris-wilson.co.uk

drm/i915/selftests: Tweak igt_ggtt_page to speed it up

Reduce the number of GGTT PTE operations to speed the test up, but we
reduce the likelihood of spotting a coherency error in those operations.
However, Broxton is sporadically timing on this test, presumably because
its GGTT operations are all uncached.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171223110407.21402-1-chris@chris-wilson.co.uk

i915/drrs/debugfs: psr status info addition

Existing debugfs entry i915_drrs_status is updated with whether PSR
is the cause for DRRS disabled state.

[v2]: Dropped the module parameter details as ctl moved from module
      parameter to debugfs. [Rodrigo]

[v3]: Crtc ID information is dropped as there is no immediate usecase.
      [Rodrigo].

Signed-off-by: C, Ramalingam <ramalingam.c@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1511151827-6596-1-git-send-email-ramalingam.c@intel.com

drm/i915: Runtime disable for eDP DRRS

Debugfs called i915_drrs_ctl is added to enable and disable the
eDP DRRS. Writing 0 will disable the feature, whereas non-zero
will enable the feature.

Possibility of disabling the DRRS, enables the testing of the
frontbuffer tracking based features (FBC, DRRS and PSR) as
standalone or any combination of the set.

[v2]: ctl interface is moved from module parameter to debugfs [Rodrigo]

Signed-off-by: C, Ramalingam <ramalingam.c@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510079903-29441-1-git-send-email-ramalingam.c@intel.com

drm/i915/vlv: Add cdclk workaround for DSI

At least on the Chuwi Vi8 (non pro/plus) the LCD panel will show an image
shifted aprox. 20% to the left (with wraparound) and sometimes also wrong
colors, showing that the panel controller is starting with sampling the
datastream somewhere mid-line. This happens after the first blanking and
re-init of the panel.

After looking at drm.debug output I noticed that initially we inherit the
cdclk of 333333 KHz set by the GOP, but after the re-init we picked 266667
KHz, which turns out to be the cause of this problem, a quick hack to hard
code the cdclk to 333333 KHz makes the problem go away.

I've tested this on various Bay Trail devices, to make sure this not does
cause regressions on other devices and the higher cdclk does not cause
any problems on the following devices:
-GP-electronic T701      1024x600   333333 KHz cdclk after this patch
-PEAQ C1010              1920x1200  333333 KHz cdclk after this patch
-PoV mobii-wintab-800w    800x1280  333333 KHz cdclk after this patch
-Asus Transformer-T100TA 1368x768   320000 KHz cdclk after this patch

Also interesting wrt this is the comment in vlv_calc_cdclk about the
existing workaround to avoid 200 Mhz as clock because that causes issues
in some cases.

This commit extends the "do not use 200 Mhz" workaround with an extra
check to require atleast 320000 KHz (avoiding 266667 KHz) when a DSI
panel is active.

Changes in v2:
-Change the commit message and the code comment to not treat the GOP as
 a reference, the GOP should not be treated as a reference

Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171220105017.11259-1-hdegoede@redhat.com

drm/i915: Apply Display WA #1183 on skl, kbl, and cfl

Display WA #1183 was recently added to workaround
"Failures when enabling DPLL0 with eDP link rate 2.16
or 4.32 GHz and CD clock frequency 308.57 or 617.14 MHz
(CDCLK_CTL CD Frequency Select 10b or 11b) used in this
 enabling or in previous enabling."

This workaround was designed to minimize the impact only
to save the bad case with that link rates. But HW engineers
indicated that it should be safe to apply broadly, although
they were expecting the DPLL0 link rate to be unchanged on
runtime.

We need to cover 2 cases: when we are in fact enabling DPLL0
and when we are just changing the frequency with small
differences.

This is based on previous patch by Rodrigo Vivi with suggestions
from Ville Syrjälä.

Cc: Arthur J Runyan <arthur.j.runyan@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171204232210.4958-1-lucas.demarchi@intel.com

drm/i915: Update DRIVER_DATE to 20171222

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Show HWSP in intel_engine_dump()

Looking at a CI failure with an ominous line of
[  362.550715] hangcheck current seqno ffffff6b, last ffffff8c, hangcheck ffffff6b [6016 ms], inflight 118
with no apparent cause for the seqno to be negative, left me wondering
if someone had scribbled over the HWSP. So include the HWSP in the
engine dump to see if there are more signs of random scribbling.

v2: Fix row pointer, i is now incremented by 8 so doesn't need scaling
by 8, and we don't need to keep volatile here as the status_page isn't
marked up as volatile itself.
v3: Use hexdump, with suppression of identical lines. (Tvrtko)
    Which results in

HWSP:
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
*
00000040 00000001 00000000 00000018 00000002 00000001 00000000 00000018 00000000
00000060 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000003
00000080 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
*
000000c0 00000002 00000000 00000000 00000000 00000000 00000000 00000000 00000000
000000e0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
*

    instead of 128 lines of mostly 0s.
v4: Tidy up the locals

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171222182521.18106-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: Assert that the request is on the execution queue before being removed

We should only attempt to remove requests from the execution queue that
are on the execution queue. These are the requests that have been
assigned a global_seqno, so we can assert that we only attempt to remove
requests with a nonzero global_seqno. Afterwards we assert that we
remove them in order, i.e. the global_seqno matches the engine's seqno,
but that leaves a small loophole for an unattached request on an unused
engine.

We can then make the same assertion on queuing the request to the
execution engine, it must have a zero global_seqno or else we are queuing
the same request twice.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171222141959.3006-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915/execlists: Show preemption progress in GEM_TRACE

We already emit a GEM_TRACE for when we start preemption, but we lack
one to show when the preemption is completed and we return to the regular
queue. This is to continue the investigation into the mysterious

<0>[  197.854177]   <idle>-0       1..s1 197837017us : execlists_submission_tasklet: rcs0 cs-irq head=0 [0], tail=0 [0]
<0>[  197.854209] drv_self-6008    2.... 197837390us : reset_common_ring: rcs0 seqno=15515
<0>[  197.854240] drv_self-6008    2.... 197837415us : reset_common_ring: bcs0 seqno=0
<0>[  197.854270] drv_self-6008    2.... 197837443us : reset_common_ring: vcs0 seqno=0
<0>[  197.854300] drv_self-6008    2.... 197837463us : reset_common_ring: vcs1 seqno=0
<0>[  197.854330] drv_self-6008    2.... 197837482us : reset_common_ring: vecs0 seqno=0
<0>[  197.854360] ksoftirq-23      2..s. 197838341us : execlists_submission_tasklet: bcs0 in[0]:  ctx=0.1, seqno=1dce7
<0>[  197.854392]   <idle>-0       1..s1 197838347us : execlists_submission_tasklet: bcs0 cs-irq head=0 [0], tail=0 [0]
<0>[  197.854423] ksoftirq-23      2..s. 197838354us : execlists_submission_tasklet: vcs0 in[0]:  ctx=0.1, seqno=1d027
<0>[  197.854456] ksoftirq-23      2.Ns. 197838361us : execlists_submission_tasklet: vcs1 in[0]:  ctx=0.1, seqno=1e738
<0>[  197.854488] ksoftirq-23      2.Ns. 197838366us : execlists_submission_tasklet: vecs0 in[0]:  ctx=0.1, seqno=235aa
<0>[  197.854520] ksoftirq-23      2.Ns. 197838376us : execlists_submission_tasklet: rcs0 in[0]:  ctx=0.1, seqno=15518
<0>[  197.854552]   <idle>-0       1..s1 197853285us : execlists_submission_tasklet: rcs0 cs-irq head=0 [0], tail=7 [7]
<0>[  197.854584]   <idle>-0       1..s1 197853285us : execlists_submission_tasklet: rcs0 csb[1]: status=0x00000018:0x00000000
<0>[  197.854616]   <idle>-0       1..s1 197853286us : execlists_submission_tasklet: rcs0 out[0]: ctx=0.0, seqno=0

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171222132742.4272-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

Merge tag 'gvt-next-2017-12-22' of https://github.com/intel/gvt-linux into drm-intel-next-queued

gvt-next-2017-12-22:

- more mmio switch optimization (Weinan)
- cleanup i915_reg_t vs. offset usage (Zhenyu)
- move write protect handler out of mmio handler (Zhenyu)

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171222085141.vgewlvvni37dljdt@zhen-hp.sh.intel.com

drm/i915: Put all non-blocking modesets onto an ordered wq

We have plenty of global registers and whatnot programmed without
any further locking by the modeset code. Currently non-bocking
modesets are allowed to execute in parallel which could corrupt
said registers.

To avoid the problem let's run all non-blocking modesets on an
ordered workqueue. We still put page flips etc. to system_unbound_wq
allowing page flips on one pipe to execute in parallel with page flips
or a modeset on a another pipe (assuming no known state is shared
between them, at which point they would have been added to the same
atomic commit and serialized that way).

Blocking modesets are already serialized with each other by
connection_mutex, and thus are safe. To serialize them with
non-blocking modesets we just flush the workqueue before executing
blocking modesets.

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: 94f050246b42 ("drm/i915: nonblocking commit")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171113133622.8593-1-ville.syrjala@linux.intel.com
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Disable GMBUS clock gating around GMBUS transfers on gen9+

Gen9+ need to disable GMBUS clock gating when doing multi part
transfers. Otherwise clock gating will kick in when GMBUS is in
the WAIT state and presumably that will corrupt the transfer.
This is documented as Display WA #0868.

Apparently older hardware doesn't allow clock gating in the WAIT
state and thus are unaffected by this problem.

v2: Limit the PCH w/a to gen9 and gen10 only (DK)
    Actually change it to check the PCH type instead since
    it's the PCH that actually contains the GMBUS hardware

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20171221202432.17373-1-ville.syrjala@linux.intel.com

drm/i915: Clean up the PNV bit banging vs. GMBUS clock gating w/a

Give a proper name for the GMBUS clock gating disable bit on PNV,
and rename intel_i2c_quirk_set() to pnv_gmbus_clock_gating() for
clarity.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171208213739.16388-3-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: No need to power up PG2 for GMBUS on BXT

GMBUS lives in PG1, so no need to power up PG2. We do want to prevent
the DMC from making a mess of things though, so add GMBUS to the DC off
power well.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171208213739.16388-2-ville.syrjala@linux.intel.com
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>

drm/i915: Disable DC states around GMBUS on GLK

Prevent the DMC from destroying GMBUS transfers on GLK. GMBUS
lives in PG1 so DC off is all we need.

Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171208213739.16388-1-ville.syrjala@linux.intel.com
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>

drm/i915: Do not enable movntdqa optimization in hypervisor guest

Our QA reported a problem caused by movntdqa instructions. Currently,
the KVM hypervisor doesn't support VEX-prefix instructions emulation.
If users passthrough a GPU to guest with vfio option 'x-no-mmap=on',
then all access to the BARs will be trapped and emulated. The KVM
hypervisor would raise an inertal error to qemu which cause the guest
killed. (Since 'movntdqa' ins is not supported.)

This patch try not to enable movntdqa optimization if the driver is
running in hypervisor guest.

Signed-off-by: Changbin Du <changbin.du@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1513924309-3113-1-git-send-email-changbin.du@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Dump device info at once

We are dumping device info separately for sw_only and runtime part
but to simplify the code we can also do it from one place once
we complete driver load.

v2: use dedicated welcome function (Chris)

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171221185334.17396-8-michal.wajdeczko@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171221215735.30314-7-chris@chris-wilson.co.uk

drm/i915: Add pretty printer for runtime part of intel_device_info

During initialization of the runtime part of the intel_device_info
we are dumping that part using DRM_DEBUG_DRIVER mechanism.
As we already have pretty printer for const part of the info,
make similar function for the runtime part and use it separately.

v2: add runtime dump to debugfs (Chris)

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171221185334.17396-7-michal.wajdeczko@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171221215735.30314-6-chris@chris-wilson.co.uk

drm/i915: Update intel_device_info_runtime_init() parameter

As we try to follow object-verb pattern in our functions, update
intel_device_info_runtime_init() parameter from dev_priv to info.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171221185334.17396-6-michal.wajdeczko@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171221215735.30314-5-chris@chris-wilson.co.uk

drm/i915: Move intel_device_info definitions to its own header

We already keep intel_device_info functions in dedicated file.
Add matching header file and move related definitions there.

v2: add gen boundaries (Chris)

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171221185334.17396-5-michal.wajdeczko@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171221215735.30314-4-chris@chris-wilson.co.uk

drm/i915: Move opregion definitions to dedicated intel_opregion.h

We already have dedicated file for opregion related code, dedicated
header will make our life easier.

v2: reorder includes (Chris)

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171221185334.17396-4-michal.wajdeczko@intel.com
[ickle: quieten checkpatch]
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171221215735.30314-3-chris@chris-wilson.co.uk

drm/i915: Move display related definitions to dedicated header

We already have separate files for display related code, there
is no reason to keep all display definitions in master header.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171221185334.17396-3-michal.wajdeczko@intel.com
[ickle: quieten checkpatch]
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171221215735.30314-2-chris@chris-wilson.co.uk

drm/i915: Move some utility functions to i915_util.h

We have dedicated header file for utility functions and macros.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171221185334.17396-2-michal.wajdeczko@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171221215735.30314-1-chris@chris-wilson.co.uk

drm/i915/gvt: move write protect handler out of mmio emulation function

It's a bit confusing that page write protect handler is live in
mmio emulation handler. This moves it to stand alone gvt ops.

Also remove unnecessary check of write protected page access
in mmio read handler and cleanup handling of failsafe case.

v2: rebase

Reviewed-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: cleanup usage for typed mmio reg vs. offset

We had previous hack that tried to accept either i915_reg_t or offset
value to access vGPU virtual/shadow regs which broke that purpose to
be type safe in context. This one trys to explicitly separate the usage
of typed mmio reg with real offset.

Old vgpu_vreg(offset) helper is used only for offset now with new
vgpu_vreg_t(reg) is used for i915_reg_t only. Convert left usage
of that to new helper.

Also fixed left KASAN warning issues caused by previous hack.

v2: rebase, fixup against recent mmio switch change

Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: Fix pipe A enable as default for vgpu

observed igt drv_module_reload test case failure on 4.15.0
rc2 kernel with panic due to no active pipe available.

the gpu will reset during unload/load and make pipe config reg
lost which can cause kernel panic issue happen.

this patch is to move pipe enabling to emulate_mointor_status_chagne
to handle vgpu reset case as well.

Fixes: 7e6059020894 ("drm/i915/gvt: enabled pipe A default on creating vgpu")
Signed-off-by: Xiaolin Zhang <xiaolin.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
(cherry picked from commit f5f00e7dcc4161f07b76ff1a854e8b1ea7a1ed41)

drm/i915/gvt: always use i915_reg_t for MMIO handler definition

Always requires properly defined i915_reg_t type for MMIO handler
definition.

Fix kasan warning of "drivers/gpu/drm/i915/gvt/handlers.c:2397:1: error: the frame size of 32120 bytes is larger than 8192 bytes"

Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915: Show FBC worker status in debugfs

Include the pending update from the FBC worker in i915_fbc_status.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171220205848.8510-1-chris@chris-wilson.co.uk
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>

drm/i915: Disable all planes for load detection, v2.

We don't need any active planes during load detection, so just disable
them all. This saves us from having to come up with a suitable
framebuffer. And we also avoid leaving sprite/cursor planes on and
potentially presenting them at a peculiar location during the load
detection.

Changes since v1 (Maarten):
- Add missing call to add_all_affected_planes.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102707
Link: https://patchwork.freedesktop.org/patch/msgid/20171220093545.613-4-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

i915: Reject CCS modifiers for pipe C on Geminilake

Current code advertises (on the modifiers blob property) support for CCS
modifier for pipe C on GLK, only to reject it later when validating the
request before the atomic commit.

This fixes the tests igt@kms_ccs@pipe-c-*, which should skip on GLK for
pipe C (see bug 104096).

A relevant discussion is archived at:

https://lists.freedesktop.org/archives/intel-gfx/2017-December/150646.html

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104096
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Cc: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171220002410.5604-1-krisman@collabora.co.uk

drm/i915/cfl: Adding more Coffee Lake PCI IDs.

Spec has been updated with more reserved IDs for existent SKUs.

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Anuj Phogat <anuj.phogat@gmail.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Anusha Srivatsa<anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171220182919.21108-1-rodrigo.vivi@intel.com

drm/i915: Tidy up GEM_TRACE around execlists

Looking at the coordination of resets with the submission of execlists,
it will be useful to have a GEM_TRACE for when we issue the reset.
Whilst there tidy up the other GEM_TRACE to always include the engine
name, and be careful not to trust any pointers prior to asserts.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171220090626.31643-1-chris@chris-wilson.co.uk

drm/i915/psr: Fix register name mess up.

Commit 77affa31722b ("drm/i915/psr: Fix compiler warnings for
hsw_psr_disable()") swapped status and control registers while fixing
indentation. The _ctl at the end of the status register name must have to
led to this.

Fixes: 77affa31722b ("drm/i915/psr: Fix compiler warnings for hsw_psr_disable()")
References: https://www.mrc-cbu.cam.ac.uk/people/matt.davis/cmabridge/
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171220043520.2599-1-dhinakaran.pandiyan@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Avoid context dereference inside execlists_submission_tasklet

A lesson that has to be relearnt over and over again is that the request
does not keep a reference to the context and so we cannot freely
dereference the context from inside the execlists_submission_tasklet. In
particular, we try to do so in the new GEM_TRACE() so convert those over
to the port->context_id we keep for GEM debugging. This means the
tracing now depends on DRM_I915_GEM_DEBUG.

Fixes: bccd3b831185 ("drm/i915: Use trace_printk to provide a death rattle for GEM")
References: https://bugs.freedesktop.org/show_bug.cgi?id=104066
References: https://bugs.freedesktop.org/show_bug.cgi?id=104162
References: https://bugs.freedesktop.org/show_bug.cgi?id=104242
References: https://bugs.freedesktop.org/show_bug.cgi?id=104310
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171219220916.30882-1-chris@chris-wilson.co.uk