drm/i915: Large page offsets for pread/pwrite

Handle integer overflow when computing the sub-page length for shmem
backed pread/pwrite.

Reported-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181012140228.29783-1-chris@chris-wilson.co.uk

drm/i915/csr Added DC5 and DC6 counter register for ICL in debugfs entry.

DC5 and DC6 counter register tells about residency of DC5 and DC6.
Added the same in debugfs file.

v2 : Remove csr_version check.
     Added generic check regarding DC counters for  Gen9 onwards. (Rodrigo)
v3 : Simplified gen checks. (Chris)
v4 : Simplified "if" ladder for multiple gens.
v5 : Removed unnecessary comment.

Signed-off-by: Jyoti Yadav <jyoti.r.yadav@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1538762926-4880-1-git-send-email-jyoti.r.yadav@intel.com

drm/i915: promote ddb update message to DRM_DEBUG_KMS

This message is currently marked as DRM_DEBUG_ATOMIC. I would like it
to be DRM_DEBUG_KMS since it is more KMS than atomic, and this will
also make the message appear in the CI logs, which may or may not help
us with some FIFO underrun bugs.

Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004231600.14101-7-paulo.r.zanoni@intel.com

drm/i915: don't write PLANE_BUF_CFG twice every time

We were writing to PLANE_BUF_CFG(pipe, plane_id) twice for every
platform, and we were even using different values on the gen10- planar
case. The first write is useless since it just gets replaced with the
next one, so kill it.

There's a lot to improve in the DDB code, but let's start by avoiding
the double write.

Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004231600.14101-6-paulo.r.zanoni@intel.com

drm/i915: transition WMs ask for Selected Result Blocks

The transition watermarks ask for Selected Result Blocks (the real
value), not Result Blocks (the integer value). Given how ceilings are
applied in both the non-transition and the transition watermarks
calculations, we can get away with assuming that Selected Result
Blocks is actually Result Blocks minus 1 without any rounding errors.

Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004231600.14101-5-paulo.r.zanoni@intel.com

drm/i915: fix the watermark result selection on glk/gen10+

On these platforms we're supposed to unconditonally pick the method 2
result instead of the minimum.

Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004231600.14101-4-paulo.r.zanoni@intel.com

drm/i915: fix the transition minimums for gen9+ watermarks

The transition minimum is 14 blocks for gens 9 and 10, and 4 blocks
for gen 11. This minimum value is supposed to be added to the
configurable trans_amount. This matches both BSpec and additional
information provided by our HW engineers.

Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004231600.14101-3-paulo.r.zanoni@intel.com

drm/i915: DRM_FORMAT_C8 is not possible with Yf tiling

Function intel_framebuffer_init() checks for the possibilities during
framebuffer creation (addfb ioctl time). It is missing the fact that
the indexed format is not supported with Yf tiling.

It is worth noticing that skl_plane_format_mod_supported() correctly
handles for the C8/Yf combination, but this function runs during
modeset time, so we only reject the combination later.

Ville recently proposed a new IGT test that only uses addfb to assert
supported formats, so that IGT was failing. Add the check so we get
green squares right from the start after Ville merges his test.

Also drive-by fix the missing /* fall through */ in the chunk we
modified by just turning it into a "break;" since IMHO breaks are
easier to read than fall-throughs.

BSpec: 18565
Testcase: igt/kms_addfb_basic/expected-formats (not merged yet)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180925001913.29460-1-paulo.r.zanoni@intel.com

drm/i915: Inject load failure inside intel_engines_init_mmio

We need extra load failure point to better test error path in
i915_driver_init_mmio.

Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181011130008.24640-2-michal.wajdeczko@intel.com

drm/i915: Fix i915_driver_init_mmio error path

In case of the error we missed to call i915_mmio_cleanup
that matches earlier call to i915_mmio_setup.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181011130008.24640-1-michal.wajdeczko@intel.com

drm/i915/aml: Add new Amber Lake PCI ID

This new AML PCI ID uses the same gen graphics as Coffe Lake not a
Kaby Lake one like the other AMLs.

So to make it more explicit renaming INTEL_AML_GT2_IDS to
INTEL_AML_KBL_GT2_IDS and naming this id as INTEL_AML_CFL_GT2_IDS.

v2:
- missed add new AML macro to INTEL_CFL_IDS()
- added derivated platform initials to AML macros

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180927010650.22731-1-jose.souza@intel.com

drm/i915/selftests: Disable shrinker across mmap-exhaustion

For mmap-exhaustion, we deliberately put the system under a large amount
of pressure to ensure that we are able to reap mmap-offsets from dead
objects. If background activity does that reaping for us, that defeats
the purpose of the test and in some cases will fail our sanity checks
(because of the fake activity we use to prevent the idle worker).

Fixes: 932cac10c8fb ("drm/i915/selftests: Prevent background reaping of acti
ve objects")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181011103748.18387-1-chris@chris-wilson.co.uk

drm/nouveau: Fix nv50_mstc->best_encoder()

As mentioned in the previous commit, we currently prevent new modesets
on recently-removed MST connectors by returning no encoder from our
->best_encoder() callback once the MST port has disappeared. This is
wrong however, because it prevents legacy modesetting users from being
able to disable CRTCs on MST connectors after the connector's respective
topology has disappeared.

So, fix this by instead by just always returning a valid encoder.

Changes since v2:
- Remove usage of atomic MST helper for now, since that got replaced
  with a much simpler solution

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20181008232437.5571-3-lyude@redhat.com

drm/atomic_helper: Allow DPMS On<->Off changes for unregistered connectors

It appears when testing my previous fix for some of the legacy
modesetting issues with MST, I misattributed some kernel splats that
started appearing on my machine after a rebase as being from upstream.
But it appears they actually came from my patch series:

[    2.980512] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:65:eDP-1]
[    2.980516] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:65:eDP-1] is not registered
[    2.980516] ------------[ cut here ]------------
[    2.980519] Could not determine valid watermarks for inherited state
[    2.980553] WARNING: CPU: 3 PID: 551 at drivers/gpu/drm/i915/intel_display.c:14983 intel_modeset_init+0x14d7/0x19f0 [i915]
[    2.980556] Modules linked in: i915(O+) i2c_algo_bit drm_kms_helper(O) syscopyarea sysfillrect sysimgblt fb_sys_fops drm(O) intel_rapl x86_pkg_temp_thermal iTCO_wdt wmi_bmof coretemp crc32_pclmul psmouse i2c_i801 mei_me mei i2c_core lpc_ich mfd_core tpm_tis tpm_tis_core wmi tpm thinkpad_acpi pcc_cpufreq video ehci_pci crc32c_intel serio_raw ehci_hcd xhci_pci xhci_hcd
[    2.980577] CPU: 3 PID: 551 Comm: systemd-udevd Tainted: G           O      4.19.0-rc7Lyude-Test+ #1
[    2.980579] Hardware name: LENOVO 20BWS1KY00/20BWS1KY00, BIOS JBET63WW (1.27 ) 11/10/2016
[    2.980605] RIP: 0010:intel_modeset_init+0x14d7/0x19f0 [i915]
[    2.980607] Code: 89 df e8 ec 27 02 00 e9 24 f2 ff ff be 03 00 00 00 48 89 df e8 da 27 02 00 e9 26 f2 ff ff 48 c7 c7 c8 d1 34 a0 e8 23 cf dc e0 <0f> 0b e9 7c fd ff ff f6 c4 04 0f 85 37 f7 ff ff 48 8b 83 60 08 00
[    2.980611] RSP: 0018:ffffc90000287988 EFLAGS: 00010282
[    2.980614] RAX: 0000000000000000 RBX: ffff88031b488000 RCX: 0000000000000006
[    2.980617] RDX: 0000000000000007 RSI: 0000000000000086 RDI: ffff880321ad54d0
[    2.980620] RBP: ffffc90000287a10 R08: 000000000000040a R09: 0000000000000065
[    2.980623] R10: ffff88030ebb8f00 R11: ffffffff81416590 R12: ffff88031b488000
[    2.980626] R13: ffff88031b4883a0 R14: ffffc900002879a8 R15: ffff880319099800
[    2.980630] FS:  00007f475620d180(0000) GS:ffff880321ac0000(0000) knlGS:0000000000000000
[    2.980633] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    2.980636] CR2: 00007f9ef28018a0 CR3: 000000031b72c001 CR4: 00000000003606e0
[    2.980639] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    2.980642] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    2.980645] Call Trace:
[    2.980675]  i915_driver_load+0xb0e/0xdc0 [i915]
[    2.980681]  ? kernfs_add_one+0xe7/0x130
[    2.980709]  i915_pci_probe+0x46/0x60 [i915]
[    2.980715]  pci_device_probe+0xd4/0x150
[    2.980719]  really_probe+0x243/0x3b0
[    2.980722]  driver_probe_device+0xba/0x100
[    2.980726]  __driver_attach+0xe4/0x110
[    2.980729]  ? driver_probe_device+0x100/0x100
[    2.980733]  bus_for_each_dev+0x74/0xb0
[    2.980736]  driver_attach+0x1e/0x20
[    2.980739]  bus_add_driver+0x159/0x230
[    2.980743]  ? 0xffffffffa0393000
[    2.980746]  driver_register+0x70/0xc0
[    2.980749]  ? 0xffffffffa0393000
[    2.980753]  __pci_register_driver+0x57/0x60
[    2.980780]  i915_init+0x55/0x58 [i915]
[    2.980785]  do_one_initcall+0x4a/0x1c4
[    2.980789]  ? do_init_module+0x27/0x210
[    2.980793]  ? kmem_cache_alloc_trace+0x131/0x190
[    2.980797]  do_init_module+0x60/0x210
[    2.980800]  load_module+0x2063/0x22e0
[    2.980804]  ? vfs_read+0x116/0x140
[    2.980807]  ? vfs_read+0x116/0x140
[    2.980811]  __do_sys_finit_module+0xbd/0x120
[    2.980814]  ? __do_sys_finit_module+0xbd/0x120
[    2.980818]  __x64_sys_finit_module+0x1a/0x20
[    2.980821]  do_syscall_64+0x5a/0x110
[    2.980824]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[    2.980826] RIP: 0033:0x7f4754e32879
[    2.980828] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d f7 45 2c 00 f7 d8 64 89 01 48
[    2.980831] RSP: 002b:00007fff43fd97d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[    2.980834] RAX: ffffffffffffffda RBX: 0000559a44ca64f0 RCX: 00007f4754e32879
[    2.980836] RDX: 0000000000000000 RSI: 00007f475599f4cd RDI: 0000000000000018
[    2.980838] RBP: 00007f475599f4cd R08: 0000000000000000 R09: 0000000000000000
[    2.980839] R10: 0000000000000018 R11: 0000000000000246 R12: 0000000000000000
[    2.980841] R13: 0000559a44c92fd0 R14: 0000000000020000 R15: 0000000000000000
[    2.980881] WARNING: CPU: 3 PID: 551 at drivers/gpu/drm/i915/intel_display.c:14983 intel_modeset_init+0x14d7/0x19f0 [i915]
[    2.980884] ---[ end trace 5eb47a76277d4731 ]---

The cause of this appears to be due to the fact that if there's
pre-existing display state that was set by the BIOS when i915 loads, it
will attempt to perform a modeset before the driver is registered with
userspace. Since this happens before the driver's registered with
userspace, it's connectors are also unregistered and thus-states which
would turn on DPMS on a connector end up getting rejected since the
connector isn't registered.

These bugs managed to get past Intel's CI partially due to the fact it
never ran a full test on my patches for some reason, but also because
all of the tests unload the GPU once before running. Since this bug is
only really triggered when the drivers tries to perform a modeset before
it's been fully registered with userspace when coming from whatever
display configuration the firmware left us with, it likely would never
have been picked up by CI in the first place.

After some discussion with vsyrjala, we decided the best course of
action would be to just move the unregistered connector checks out of
update_connector_routing() and into drm_atomic_set_crtc_for_connector().
The reason for this being that legacy modesetting isn't going to be
expecting failures anywhere (at least this is the case with X), so
ideally we want to ensure that any DPMS changes will still work even on
unregistered connectors. Instead, we now only reject new modesets which
would change the current CRTC assigned to an unregistered connector
unless no new CRTC is being assigned to replace the connector's previous
one.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: 4d80273976bf ("drm/atomic_helper: Disallow new modesets on unregistered connectors")
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181009204424.21462-1-lyude@redhat.com

drm/i915: Inject a failure point when registering a connector

Check we can handle a late display load failure where the final act of
registering the connector fails.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181010123833.16797-1-chris@chris-wilson.co.uk

drm/i915: move intel connector specific functions to intel_connector.c

Now that we have intel_connector.c, move the connector specific
functions from intel_display.c there. Fix a few checkpatch complaints
while at it. No functional changes.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181010075205.7713-2-jani.nikula@intel.com

drm/i915: rename intel_modes.c to intel_connector.c

The common denominator here seems to be connector more than
modes. Prepare for moving more connector functions to the same place. No
functional changes.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181010075205.7713-1-jani.nikula@intel.com

drm/i915: nuke the intel_lvds_connector

For a while we carried lvds connector specific data in the lvds
connector, but since commit 05c72e77ccda ("drm/i915: Nuke the LVDS lid
notifier") we haven't needed it. Revert back to plain intel_connector.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181009210916.19578-1-jani.nikula@intel.com

drm/i915: Show the DPCD read error inline

When reporting the DPCD dump through debugfs, show the errors inline
where appropriate. If a read at one particular offset fails, report it.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106371
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181010081706.29931-1-chris@chris-wilson.co.uk

drm/i915/dp: Link train Fallback on eDP only if fallback link BW can fit panel's native mode

This patch fixes the original commit c0cfb10d9e1de49 ("drm/i915/edp:
Do not do link training fallback or prune modes on EDP") that causes
a blank screen in case of certain eDP panels (Eg: seen on Dell XPS13 9350)
where first link training fails and a retraining is required by falling
back to lower link rate/lane count.
In case of some panels they advertise higher link rate/lane count
than whats required for supporting the panel's native mode.
But we always link train at highest link rate/lane count for eDP
and if that fails we can still fallback to lower link rate/lane count
as long as the fallback link BW still fits the native mode to avoid
pruning the panel's native mode yet retraining at fallback values
to recover from a blank screen.

v3:
* Add const for fixed_mode (Ville)
v2:
* Send uevent if link failure on eDP unconditionally

Fixes: c0cfb10d9e1d ("drm/i915/edp: Do not do link training fallback or prune modes on EDP")
Cc: Clinton Taylor <clinton.a.taylor@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: <stable@vger.kernel.org> # v4.17+
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107489
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105338
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Tested-by: Alexander Wilson <alexander.wilson@ncf.edu>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181009212804.702-1-manasi.d.navare@intel.com

drm/i915: add a common connector type independent destroy hook

Almost all of the connector destroy functions do the same thing. The
differences are in the edid, detect_edid and panel cleanups, but those
are safely NULL when not initialized. Roll out a common connector
destroy hook.

Inspired by commit bc3213c44415 ("drm/i915: Drop the eDP check from
intel_dp_connector_destroy()").

Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181009141103.20387-1-jani.nikula@intel.com

drm/i915: Fix intel_dp_mst_best_encoder()

Currently, i915 appears to rely on blocking modesets on
no-longer-present MSTB ports by simply returning NULL for
->best_encoder(), which in turn causes any new atomic commits that don't
disable the CRTC to fail. This is wrong however, since we still want to
allow userspace to disable CRTCs on no-longer-present MSTB ports by
changing the DPMS state to off and this still requires that we retrieve
an encoder.

So, fix this by always returning a valid encoder regardless of the state
of the MST port.

Changes since v1:
- Remove mst atomic helper, since this got replaced with a much simpler
  solution

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20181008232437.5571-6-lyude@redhat.com

drm/i915: Skip vcpi allocation for MSTB ports that are gone

Since we need to be able to allow DPMS on->off prop changes after an MST
port has disappeared from the system, we need to be able to make sure we
can compute a config for the resulting atomic commit. Currently this is
impossible when the port has disappeared, since the VCPI slot searching
we try to do in intel_dp_mst_compute_config() will fail with -EINVAL.

Since the only commits we want to allow on no-longer-present MST ports
are ones that shut off display hardware, we already know that no VCPI
allocations are needed. So, hardcode the VCPI slot count to 0 when
intel_dp_mst_compute_config() is called on an MST port that's gone.

Changes since V4:
- Don't use mst_port_gone at all, just check whether or not the drm
  connector is registered - Daniel Vetter

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20181008232437.5571-5-lyude@redhat.com

drm/i915: Don't unset intel_connector->mst_port

Currently we set intel_connector->mst_port to NULL to signify that the
MST port has been removed from the system so that we can prevent further
action on the port such as connector probes, mode probing, etc.
However, we're going to need access to intel_connector->mst_port in
order to fixup ->best_encoder() so that it can always return the correct
encoder for an MST port to prevent legacy DPMS prop changes from
failing. This should be safe, so instead keep intel_connector->mst_port
always set and instead just check the status of
drm_connector->regustered to signify whether or not the connector has
disappeared from the system.

Changes since v2:
- Add a comment to mst_port_gone (Jani Nikula)
- Change mst_port_gone to a u8 instead of a bool, per the kernel bot.
  Apparently bool is discouraged in structs these days
Changes since v4:
- Don't use mst_port_gone at all! Just check if the connector is
  registered or not - Daniel Vetter

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20181008232437.5571-4-lyude@redhat.com

drm/atomic_helper: Disallow new modesets on unregistered connectors

With the exception of modesets which would switch the DPMS state of a
connector from on to off, we want to make sure that we disallow all
modesets which would result in enabling a new monitor or a new mode
configuration on a monitor if the connector for the display in question
is no longer registered. This allows us to stop userspace from trying to
enable new displays on connectors for an MST topology that were just
removed from the system, without preventing userspace from disabling
DPMS on those connectors.

Changes since v5:
- Fix typo in comment, nothing else

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20181008232437.5571-2-lyude@redhat.com

drm/i915: Drop the eDP check from intel_dp_connector_destroy()

As long as the connector was zeroed during allocation calling
intel_panel_fini() is safe even if we haven't initialized
the panel struct explicitly. So let's drop the useless eDP
check from dp connector destruction.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181008134641.24868-2-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Do intel_panel_destroy_backlight() later

Currently we destroy the backlight during connector unregistration.
That means the final modeset performed by drm_atomic_helper_shutdown()
will leave the backlight on. We don't want that so let's just move
intel_panel_destroy_backlight() into intel_panel_fini() which gets
called during connector destuction.

We still unregister the user visible backlight device during connector
unregistration.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181008134641.24868-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106386

drm/i915/icl:Add Wa_1606682166

Incorrect TDL's SSP address shift in SARB for 16:6 & 18:8 modes.
Disable the Sampler state prefetch functionality in the SARB by
programming 0xB000[30] to '1'. This is to be done at boot time
and the feature must remain disabled permanently.

Fixes flaky tex-mip-level-selection* piglit tests with Mesa i965
driver.

Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004182939.7668-6-radhakrishna.sripada@intel.com

drm/i915/icl: Add Wa_1406609255

Shader feature to prefetch binding tables does not support 16:6 18:8 BTP
formats. Enabling fault handling could result in hangs with faults.
Disabling demand prefetch would disable binding table prefetch.

V2: Fix the stepping rivision to B0(Mika)

References: HSDES#1406609255, HSDES#1406573985
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004182939.7668-5-radhakrishna.sripada@intel.com

drm/i915: Fixup kernel doc for param name changes

s/crtc/crtc_state/ for the kernel doc as well as the params.

Fixes: 65c307fd08dd ("drm/i915: Make shared dpll functions take crtc_state, v3.")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181008104808.17457-1-chris@chris-wilson.co.uk

drm/i915: Rename variables in intel_primary_plane_create()

Let's try to stick a common naming pattern in all the plane init funcs.

v2: Rebase due to color_encoding/range props

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181005125817.22576-12-ville.syrjala@linux.intel.com

drm/i915: s/intel_plane/plane/ in sprite init

Use a more familiar naming pattern for our variables in the sprite plane
init function.

v2: Drop the redundant 'plane' from plane_formats and num_planes_formats
    too
v3: Rebase due to ->max_stride() and ->check_plane() changes

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> #v2
Link: https://patchwork.freedesktop.org/patch/msgid/20181005125817.22576-11-ville.syrjala@linux.intel.com

drm/i915: Extract skl_universal_plane_init()

There's not much point in following the primary vs. sprite split
for the SKL+ universal plane init code. The only difference is
of our own doing in the form of the .check_plane(). Let's make
a small exception for that little detail and otherwise share
the same code to initialize all the universal planes.

Eventually we should eliminate the mess around .check_plane()
as well, but for now let's be happy with some code reduction.

v2: Remember to set up plane->has_fbc
    Make skl_plane_has_ccs() static
v3: Rebase due to NV12, rename some variables
v4: Don't leave the color_encoding/range props behind
v5: Rebase dur to blend properties, skl_plane_max_stride() and
    skl_plane_check()
v6: Make skl_update_plane() static

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> #v4
Link: https://patchwork.freedesktop.org/patch/msgid/20181005125817.22576-10-ville.syrjala@linux.intel.com

drm/i915: Introduce intel_plane_alloc()

Pull the common plane+plane_state allocation into a small helper.
Reduces the amount of boilerplate in the plane initialization
functions.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181005125817.22576-9-ville.syrjala@linux.intel.com

drm/i915: Move plane_state->scaler_id initialization into intel_create_plane_state()

No point in having each caller of intel_create_plane_state() initialize
the scaler_id to -1. Instead just do it in intel_create_plane_state().

Previously we left scaler_id at 0 for pre-SKL platforms, but I can't
see how initializing it to -1 always would cause any harm.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181005125817.22576-8-ville.syrjala@linux.intel.com

drm/i915: Add missing pixel formats for skl+ "sprites"

All SKL+ universal planes support the same set of formats (with the
exception of NV12 which we don't expose yet). Make the format lists
for primary and sprites the same.

And make the format list const while at it.

v2: Deal with the "planar" format list as well

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181005125817.22576-7-ville.syrjala@linux.intel.com

drm/i915: Disallow plane scaling with specific pixel formats

Plane scaling is not supported with specific pixel formats. Disallow
plane scaling when such a format is used. Currently the only such
pixel format we expose is C8, but in case we add more in the future
let's make it easy to deal with them.

v2: Redo due to plane_check() refactoring

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20181005125817.22576-6-ville.syrjala@linux.intel.com

drm/i915: Allow horizontal mirroring for cnl+ "sprite" planes

All CNL universal planes support horizontal mirroring. Currently
we expose the capability only for the primary plane. Expose it
for the overlay planes as well.

Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181005125817.22576-5-ville.syrjala@linux.intel.com

drm/i915: Don't populate plane->i9xx_plane for sprites

enum i9xx_plane_id namespace is not valid for any sprite plane,
so let's not even populate plane->i9xx_plane.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181005125817.22576-4-ville.syrjala@linux.intel.com

drm/i915: Populate possible_crtcs for primary/cursor planes

We're currently not providing the possible_crtcs mask to
drm_universal_plane_init() for primary/cursor planes. While that does
work on account of drm_crtc_init_with_planes() filling those up
for us, it's inconsisten with what we're doing for sprite planes.

Let's just always pass the possible_crtcs bitmask to
drm_universal_plane_init(). This does assume that crtc->index
== pipe. But we're already making that assumption elsewhere so
it doesn't seem like a very big sin here.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181005125817.22576-3-ville.syrjala@linux.intel.com

drm/i915: Constify all plane_funcs structs

plane_funcs can be cosnt. Make them so.

v2: Rebase due to per-platforms plane_funcs

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181005125817.22576-2-ville.syrjala@linux.intel.com

drm/i915/psr: Remove alpm from i915_psr

ALPM is a requirement and we don't need to keep it's cached, what
were done in commit 97c9de66ca80
("drm/i915/psr: Fix ALPM cap check for PSR2") but the alpm was not
removed from i915_psr.

Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181003205031.32474-7-jose.souza@intel.com

drm/i915/psr: Use WA to force HW tracking to exit PSR2

This WA also works fine for PSR2, triggering a selective update when
possible.

Acked-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181003205031.32474-4-jose.souza@intel.com

drm/i915/psr: Remove PSR2 TODO error handling

We are already handling all PSR2 errors, so we can drop this TODO.

Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181003205031.32474-3-jose.souza@intel.com

drm/i915/psr: Make MASK_DISP_REG_WRITE reserved in PSR_MASK for ICL

ICL spec states that this bit is now reserved.

Bspec: 7722

v2(Dhinakaran and Jani):
- instead of remove bit in gen11 now only setting if if gen < 11
- changed commit title

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181003205031.32474-2-jose.souza@intel.com

drm/i915/psr: Share PSR and PSR2 exit mask

Now both PSR and PSR2 have the same exit mask, so let's share then
instead of have the same code 2 times.

Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181003205031.32474-1-jose.souza@intel.com

firmware/dmc/icl: Add missing MODULE_FIRMWARE() for Icelake.

Add missing MODULE_FIRMWARE while loading DMC ICL.

v2: Add Fixes tag. (Rodrigo)
v3: Rebase by Rodrigo after commit 7fe78985cd08 ("drm/i915/csr:
 restructure CSR firmware definition macros")
v4: Rodrigo fixing his own mess on commit mentioning on v3
    comment above.

Fixes: 4445930f1c4a ("firmware/dmc/icl: load v1.07 on icelake.")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (v2)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004223613.19938-1-rodrigo.vivi@intel.com

drm/i915/icl: MBUS B credit change

No functional change. But just a minor change to keep
up with Spec, since it has changed since commit c3cc39c539d4
("drm/i915/icl: program mbus during pipe enable")

The instructions previously said to program pipe's
B credit = 24 / number of pipes, which is 8 for ICL.
Now the spec gives us direct values independent of number
of pipes. Let's keep in sync.

Also just a reorder on fields to make easier to compare
against spec's sequence: A -> BW -> B.

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: Arthur J Runyan <arthur.j.runyan@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004151814.6054-1-rodrigo.vivi@intel.com

drm/i915: Apply correct ddi translation table for AML device

Amber Lake used the same gen graphics as Kaby Lake. Kernel driver
should configure KBL's DDI buffer setting for AML ULX as well.

So far, driver would load DDI translation table that used for
KBL H/S platform and apply it on AML devices. But AML is belong to
ULX series. This change will lead driver to apply KBL-Y's DDI table
for AML devices to avoid unexpected eDP/DP signal quality issue.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jose Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lee, Shawn C <shawn.c.lee@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1538034499-31256-2-git-send-email-shawn.c.lee@intel.com

drm/i915: Add new AML_ULX support list

According to patch "drm/i915/aml: Introducing Amber Lake platform"
(e364672477a1). Add a new marco for AML ULX GT2 devices.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jose Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lee, Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1538034499-31256-1-git-send-email-shawn.c.lee@intel.com

drm/i915: Redefine some Whiskey Lake SKUs

commit 'b9be78531d27 ("drm/i915/whl: Introducing
Whiskey Lake platform")' introduced WHL by moving some
of CFL IDs here and using the Spec information of "U43" for
most of IDs what appeared to be GT3.

However when propagating the change to Mesa, Lionel noticed
that based on number of execution unities the classification
here seems at least strange.

So, let's move for now with the information we trust more:
the number of EUs. So we are able to propagate this change
across the stack without getting stuck forever.

Reference: https://patchwork.freedesktop.org/patch/246695/
Fixes: b9be78531d27 ("drm/i915/whl: Introducing Whiskey Lake platform")
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180924234312.15017-1-rodrigo.vivi@intel.com

drm/i915: Fix ILK-IVB sprite enable delays

Sprite enable on ILK-IVB may take two frames to complete
when the hardware is in big FIFO mode (LP1+). That is
not entirely great as it means the sprite enable may
actually happen one frame after we've already signalled
flip completion. At the very least crc checks may fail
due to the sprite not yet being visible when we expect it.

We already have code to deal with big FIFO mode when it
comes to the sprite scaling on IVB
(WaCxSRDisabledForSpriteScaling:ivb). Let's extend that
workaround to kick in whenever the sprite is in the process
of being enabled. Also ILK/SNB bspec has some notes to
indicate that we should most likely also do the sprite
scaling w/a on all three platforms, so let's do that as well.

Pretty easy to reproduce on SNB/IVB. ILK has proved more
elusive, but let's trust the spec and include it as well.

v2: Make sure the pipe is active before the vblank wait

Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Testcase: igt/kms_plane/pixel-format-pipe-*-planes
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107749
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20181004121527.30249-1-ville.syrjala@linux.intel.com

drm/i915: Get rid of intel_crtc->config in crtc_enable/disable functions, v2.

These functions already have a pointer to the correct state,
so use it instead of crtc->config.

Changes since v1:
- Move pll changes to the pll patch.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004094604.2646-14-maarten.lankhorst@linux.intel.com

drm/i915: Get rid of crtc->config in chv_data_lane_soft_reset

Fixing chv_set_phy_signal_level() still requires too many levels of
indirection to pass crtc_state along, but chv_data_lane_soft_reset()
already has a crtc_state we can use.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004094604.2646-13-maarten.lankhorst@linux.intel.com

drm/i915: Get rid of crtc->config dereference in intel_dp_retrain_link

We're already using crtc_state here and made sure no modeset is
occurring by looking at conn_state->commit->hw_done, so there's
no need to dereference crtc->config.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004094604.2646-12-maarten.lankhorst@linux.intel.com

drm/i915: Use crtc->state in intel_fbdev_init_bios

fbdev init shouldn't race with userspace since it's called from
intel_modeset_init, so it's safe to dereference crtc->state and
assume nothing changed yet.

At least not more harmful than crtc->config.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004094604.2646-11-maarten.lankhorst@linux.intel.com

drm/i915: Get rid of crtc->config from icl_pll_to_ddi_pll_sel

Pass the full state to intel_ddi_clk_select, so we can pass it
to icl_pll_to_ddi_pll_sel instead of passign the crtc and having
to dereference crtc->config

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004094604.2646-10-maarten.lankhorst@linux.intel.com

drm/i915: Make ironlake_pch_transcoder_set_timings take crtc_state

Instead of passing crtc and dereferencing crtc->config,
pass the correct crtc_state and obtain the crtc pointer from there.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004094604.2646-8-maarten.lankhorst@linux.intel.com

drm/i915: Make shared dpll functions take crtc_state, v3.

Do not rely on crtc->config any more. Remove the assertion from
ibx_pch_dpll_disable, because we the dpll state tracking should
already handle this case correctly.

Changes since v1:
- Fixup accidental early return in intel_prepare_shared_dpll, oops!
Changes since v2:
- Don't use the freed crtc_state in intel_crtc_disable_noatomic()

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181005095244.1324-1-maarten.lankhorst@linux.intel.com

drm/i915: Make pll functions take crtc_state, v2.

Instead of passing crtc and dereferencing crtc->config,
passs the correct crtc_state and obtain the crtc pointer from there.

Changes since v1:
- Move vlv/chv changes and i9xx_set_pll_dividers changes
  from crtc_enable/disable patches to here.
- Add commit message.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004094604.2646-7-maarten.lankhorst@linux.intel.com

drm/i915: Make skl_detach_scalers take crtc_state

Rename intel_crtc to crtc, and pass crtc_state instead of looking at
crtc->config.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004094604.2646-6-maarten.lankhorst@linux.intel.com

drm/i915: Use crtc_state in ironlake_enable_pch_transcoder

Rename intel_crtc to crtc, and pass crtc_state so we don't have to
dereference crtc->config.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004094604.2646-5-maarten.lankhorst@linux.intel.com

drm/i915: Make intel_set_pipe_timings/src_size take a pointer to crtc_state

Pass the state instead of looking at crtc->config and rename intel_crtc
to crtc.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004094604.2646-4-maarten.lankhorst@linux.intel.com

drm/i915: Make panel fitter functions take state

If we look at the correct state instead of crtc->config, we can nuke the
force parameter, and we cleanup a few more users of crtc->config at the
same time.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004094604.2646-3-maarten.lankhorst@linux.intel.com

drm/i915: Remove dereferences of crtc->config in set_pipeconf/misc functions, v2.

One more user of crtc->config down. :)

Changes since v1:
- Constify crtc_state
- int pipe -> enum pipe pipe
- Move i9xx_set_pipeconf declaration to the other pipeconf declarations.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004094604.2646-2-maarten.lankhorst@linux.intel.com

drm/i915: Remove the global cache shrink & rcu barrier on allocation failure

Earlier, we reasoned that having idled the gpu under mempressure, that
would be a good time to trim our request slabs in order to perform the
next request allocation. We have stopped performing the global operation
on the device (no idling) and wish to make the allocation failure
handling more local, so out with the global barrier that may take a long
time.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181005080300.9908-2-chris@chris-wilson.co.uk

drm/i915: Only reset seqno if actually idle

Before we can reset the seqno, we have to be sure the engines are idle.
In debugfs/i915_drop_caches_set, we do wait_for_idle but allow ourselves
to be interrupted. We should only proceed to reset the seqno then if we
were not interrupted, and so also avoid overwriting the error status.

References: https://bugs.freedesktop.org/show_bug.cgi?id=108133
Fixes: 6b048706f407 ("drm/i915: Forcibly flush unwanted requests in drop-caches")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004082119.24970-1-chris@chris-wilson.co.uk

drm/i915: Clean up early plane debugs

Print the plane hw state readout results in the common format
we already use for pipes and encoders. Also print some clearer
debug messages when we disable planes during the early phases
of state readout/sanitization.

v2: Rebase

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181003145052.4633-1-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Use the correct crtc when sanitizing plane mapping

When we decide that a plane is attached to the wrong pipe we try
to turn off said plane. However we are passing around the crtc we
think that the plane is supposed to be using rather than the crtc
it is currently using. That doesn't work all that well because
we may have to do vblank waits etc. and the other pipe might
not even be enabled here. So let's pass the plane's current crtc to
intel_plane_disable_noatomic() so that it can its job correctly.

To do that semi-cleanly we also have to change the plane readout
to record the plane's visibility into the bitmasks of the crtc
where the plane is currently enabled rather than to the crtc
we want to use for the plane.

One caveat here is that our active_planes bitmask will get confused
if both planes are enabled on the same pipe. Fortunately we can use
plane_mask to reconstruct active_planes sufficiently since
plane_mask still has the same meaning (is the plane visible?)
during readout. We also have to do the same during the initial
plane readout as the second plane could clear the active_planes
bit the first plane had already set.

v2: Rely on fixup_active_planes() to populate active_planes fully (Daniel)
    Add Daniel's proposed comment to better document why we do this
    Drop the redundant intel_set_plane_visible() call

Cc: stable@vger.kernel.org # fcba862e8428 drm/i915: Have plane->get_hw_state() return the current pipe
Cc: stable@vger.kernel.org
Cc: Dennis <dennis.nezic@utoronto.ca>
Cc: Daniel Vetter <daniel@ffwll.ch>
Tested-by: Dennis <dennis.nezic@utoronto.ca>
Tested-by: Peter Nowee <peter.nowee@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105637
Fixes: b1e01595a66d ("drm/i915: Redo plane sanitation during readout")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181003145017.4527-1-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Restore vblank interrupts earlier

Plane sanitation needs vblank interrupts (on account of CxSR disable).
So let's restore vblank interrupts earlier.

v2: Make it actually build
v3: Add comment to explain why we need this (Daniel)

Cc: stable@vger.kernel.org
Cc: Dennis <dennis.nezic@utoronto.ca>
Tested-by: Dennis <dennis.nezic@utoronto.ca>
Tested-by: Peter Nowee <peter.nowee@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105637
Fixes: b1e01595a66d ("drm/i915: Redo plane sanitation during readout")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181003144951.4397-1-ville.syrjala@linux.intel.com

drm/i915: Provide more clues as to why MST is/is not used

Always print out the information whether the port and sink can each
do MST. And let's include the modparam in the debug output as well.
Makes life a little less confusing when you don't have to wonder
why MST isn't kicking in.

This does cause a slight change in our behaviour towards the sink.
Previously we only read the MSTM_CAP register after passing all
the other checks. Now we will read that register regardless. Hopefully
some crazy sink doesn't get confused by a simple register read.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181003184210.1306-1-ville.syrjala@linux.intel.com
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>

drm/i915/guc: Don't clear the cookie on doorbell destroy

If the HW has not processed the db invalidation request yet, clearing
the cookie can generate a db ring. We clear the cookie when we
(re-)allocate the doorbell so no need to do it on destroy as well as no
one is going to look at it while the doorbell is inactive

v2: fix typo in patch title (Michal)

Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181002215430.15049-2-daniele.ceraolospurio@intel.com

drm/i915/guc: init GuC descriptors after GuC load

GuC stores some data in there, which might be stale after a reset.
We already reset the WQ head and tail, but more things are being moved
to the descriptor with the interface updates. Instead of trying to track
them one by one, always memset and init the descriptors from scratch
after GuC is loaded.
The code is also reorganized so that the above operations and the
doorbell creation are grouped as "client enabling"

v2: add proc_desc_fini for symmetry (Daniele), remove unneeded var init,
add guc_is_alive() (Michal)

Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181002215430.15049-1-daniele.ceraolospurio@intel.com

drm/i915/execlists: Flush the CS events before unpinning

Inside the execlists submission tasklet, we often make the mistake of
assuming that everything beneath the request is available for use.
However, the submission and the request live on two separate timelines,
and the request contents may be freed from an early retirement before we
have had a chance to run the submission tasklet (think ksoftirqd). To
safeguard ourselves against any mistakes, flush the tasklet before we
unpin the context if execlists still has a reference to this context.

v2: Pull hw_context->active tracking into schedule_in and schedule_out.

References: 60367132a214 ("drm/i915: Avoid use-after-free of ctx in request tracepoints")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181003110941.27886-1-chris@chris-wilson.co.uk

drm/i915: Clear the error PTE just once on finish

We do not need to continually clear our dedicated PTE for error capture
as it will be updated and invalidated to the next object. Only at the
end do we wish to be sure that the PTE doesn't point back to any buffer.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181001194447.29910-3-chris@chris-wilson.co.uk

drm/i915: Handle incomplete Z_FINISH for compressed error states

The final call to zlib_deflate(Z_FINISH) may require more output
space to be allocated and so needs to re-invoked. Failure to do so in
the current code leads to incomplete zlib streams (albeit intact due to
the use of Z_SYNC_FLUSH) resulting in the occasional short object
capture.

v2: Check against overrunning our pre-allocated page array
v3: Drop Z_SYNC_FLUSH entirely

Testcase: igt/i915-error-capture.js
Fixes: 0a97015d45ee ("drm/i915: Compress GPU objects in error state")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.10+
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181003082422.23214-1-chris@chris-wilson.co.uk

drm/i915/selftests: Hold task_struct ref for smoking kthread

As the kthread may terminate itself, the parent must hold a task_struct
reference for it to call kthread_stop().

<4> [498.827675] stack segment: 0000 [#1] PREEMPT SMP PTI
<4> [498.827683] CPU: 0 PID: 3872 Comm: drv_selftest Tainted: G     U            4.19.0-rc6-CI-CI_DRM_4915+ #1
<4> [498.827686] Hardware name: Intel Corporation NUC7CJYH/NUC7JYB, BIOS JYGLKCPX.86A.0027.2018.0125.1347 01/25/2018
<4> [498.827695] RIP: 0010:kthread_stop+0x36/0x210
<4> [498.827698] Code: 05 df 3d f6 7e 89 c0 48 0f a3 05 95 f8 29 01 0f 82 56 01 00 00 f0 ff 43 20 f6 43 26 20 0f 84 7f 01 00 00 48 8b ab b0 05 00 00 <f0> 80 4d 00 02 48 89 df e8 5d ff ff ff 48 89 df e8 15 c7 00 00 48
<4> [498.827701] RSP: 0018:ffffc900003937d0 EFLAGS: 00010202
<4> [498.827704] RAX: 0000000000000001 RBX: ffff8802165ece40 RCX: 0000000000000001
<4> [498.827707] RDX: 0000000000000000 RSI: 00000000ffffffff RDI: ffffffff82247460
<4> [498.827709] RBP: 6b6b6b6b6b6b6b6b R08: 00000000581395cb R09: 0000000000000001
<4> [498.827711] R10: 0000000000000000 R11: 0000000000000000 R12: ffffc90000393868
<4> [498.827713] R13: ffffc900003937f0 R14: ffff88026c068040 R15: 0000000000001057
<4> [498.827716] FS:  00007fc0c464b980(0000) GS:ffff880277e00000(0000) knlGS:0000000000000000
<4> [498.827718] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4> [498.827720] CR2: 000056178c2feca0 CR3: 000000026983c000 CR4: 0000000000340ef0
<4> [498.827723] Call Trace:
<4> [498.827824]  smoke_crescendo+0x14c/0x1d0 [i915]
<4> [498.827837]  ? _raw_spin_unlock_irqrestore+0x4c/0x60
<4> [498.827898]  ? __i915_gem_context_pin_hw_id+0x69/0x5f0 [i915]
<4> [498.827902]  ? ida_alloc_range+0x1f2/0x3d0
<4> [498.827907]  ? __mutex_unlock_slowpath+0x46/0x2b0
<4> [498.827914]  ? rcu_lockdep_current_cpu_online+0x8f/0xd0
<4> [498.827979]  live_preempt_smoke+0x2c2/0x470 [i915]
<4> [498.828047]  __i915_subtests+0x5e/0xf0 [i915]
<4> [498.828113]  __run_selftests+0x10b/0x190 [i915]
<4> [498.828175]  i915_live_selftests+0x2c/0x60 [i915]
<4> [498.828232]  i915_pci_probe+0x50/0xa0 [i915]
<4> [498.828238]  pci_device_probe+0xa1/0x130
<4> [498.828244]  really_probe+0x25d/0x3c0
<4> [498.828249]  driver_probe_device+0x10a/0x120
<4> [498.828253]  __driver_attach+0xdb/0x100
<4> [498.828256]  ? driver_probe_device+0x120/0x120
<4> [498.828259]  bus_for_each_dev+0x74/0xc0
<4> [498.828264]  bus_add_driver+0x15f/0x250
<4> [498.828268]  ? 0xffffffffa00c3000
<4> [498.828271]  driver_register+0x56/0xe0
<4> [498.828274]  ? 0xffffffffa00c3000
<4> [498.828278]  do_one_initcall+0x58/0x2e0
<4> [498.828281]  ? rcu_lockdep_current_cpu_online+0x8f/0xd0
<4> [498.828285]  ? do_init_module+0x1d/0x1ea
<4> [498.828289]  ? rcu_read_lock_sched_held+0x6f/0x80
<4> [498.828293]  ? kmem_cache_alloc_trace+0x264/0x290
<4> [498.828297]  do_init_module+0x56/0x1ea
<4> [498.828302]  load_module+0x26f5/0x29d0
<4> [498.828309]  ? vfs_read+0x122/0x140
<4> [498.828318]  ? __se_sys_finit_module+0xd3/0xf0
<4> [498.828321]  __se_sys_finit_module+0xd3/0xf0
<4> [498.828329]  do_syscall_64+0x55/0x190
<4> [498.828332]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4> [498.828335] RIP: 0033:0x7fc0c3f16839

Fixes: 992d2098ef0b ("drm/i915/selftests: Split preemption smoke test into threads")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181002132927.7669-1-chris@chris-wilson.co.uk

drm/i915/psr: Enable PSR1 on gen-9+ HW

We have new tests and fixes in place since the feature was last
disabled. Try again for gen-9+ hardware and enable only PSR1 by default as
a first step.
v2: Remove typo fix and comment improvements (Rodrigo)

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Jose Roberto de Souza <jose.souza@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
References: commit 2ee7dc497e34 ("drm/i915: disable PSR by default on HSW/BDW")
References: commit dcb2e993f3c0 ("Revert "drm/i915: Enable PSR by default on Valleyview and Cherryview."")
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Tested-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180928061117.12394-1-dhinakaran.pandiyan@intel.com

drm/i915: fix wrong error number report

During driver load it's considered that the i915_driver_create()
function fails only in case of insufficient memory. Indeed, in
case of failure of i915_driver_create(), the load function
returns indiscriminately -ENOMEM ignoring the real cause of
failure.

In i915_driver_create() get the consistent error value from
drm_dev_init() and embed it in the pointer return value.

Signed-off-by: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181002092047.14705-1-andi.shyti@intel.com

drm/i915: Show actual alongside requested frequency in debugfs/i915_rps_boost_info

Previously we hesitated in adding the hw probe for the actual GPU
frequency for rps_boost as it is quite cumbersome, but given some
surprising HW behaviour it would be useful to know both the RPS boost
state and the actual HW state in one location.

v2: vlv/chv needs more tlc

Reported-by: Tomi Sarvela <tomi.p.sarvela@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181002113221.29208-1-chris@chris-wilson.co.uk

drm/i915: Replace some open-coded i915_coherent_map_type()

A few callsites were deciding on using WC or WB maps based on
HAS_LLC(), so replace them with the equivalent helper function
i915_coherent_map_type().

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181001194447.29910-1-chris@chris-wilson.co.uk

drm/i915: Add plane alpha blending support, v2.

Add plane alpha blending support with the different blend modes.
This has been tested on a icl to show the correct results,
on earlier platforms small rounding errors cause issues. But this
already happens case with fully transparant or fully opaque RGB8888
fb's.

The recommended HW workaround is to disable alpha blending when the
plane alpha is 0 (transparant, hide plane) or 0xff (opaque, disable blending).
This is easy to implement on any platform, so just do that.

The tests for userspace are also available, and pass on gen11.

Changes since v1:
- Change mistaken < 0xff0 to 0xff00.
- Only set PLANE_KEYMSK_ALPHA_ENABLE when plane alpha < 0xff00, ignore blend mode.
- Rework disabling FBC when per pixel alpha is used.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
[mlankhorst: Change MISSING_CASE default to explicit alpha disable (mattrope)]
Link: https://patchwork.freedesktop.org/patch/msgid/20180815103405.22679-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>

drm/i915/csr: Added ICL Stepping info

As DMC Package contain DMC FW for multiple steppings including default
stepping. This patch will help to load FW for that particular stepping,
if FW for that stepping is available, instead of loading default FW.

v2 : Fix formatting issue.

Signed-off-by: Jyoti Yadav <jyoti.r.yadav@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1536169347-31326-1-git-send-email-jyoti.r.yadav@intel.com

drm/i915: Priority boost for waiting clients

Latency is in the eye of the beholder. In the case where a client stops
and waits for the gpu, give that request chain a small priority boost
(not so that it overtakes higher priority clients, to preserve the
external ordering) so that ideally the wait completes earlier.

v2: Tvrtko recommends to keep the boost-from-user-stall as small as
possible and to allow new client flows to be preferred for interactivity
over stalls.

Testcase: igt/gem_sync/switch-default
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181001144755.7978-3-chris@chris-wilson.co.uk

drm/i915: Pull scheduling under standalone lock

Currently, the backend scheduling code abuses struct_mutex into order to
have a global lock to manipulate a temporary list (without widespread
allocation) and to protect against list modifications. This is an
extraneous coupling to struct_mutex and further can not extend beyond
the local device.

Pull all the code that needs to be under the one true lock into
i915_scheduler.c, and make it so.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181001144755.7978-2-chris@chris-wilson.co.uk

drm/i915: Priority boost for new clients

Taken from an idea used for FQ_CODEL, we give the first request of a
new request flows a small priority boost. These flows are likely to
correspond with short, interactive tasks and so be more latency sensitive
than the longer free running queues. As soon as the client has more than
one request in the queue, further requests are not boosted and it settles
down into ordinary steady state behaviour.  Such small kicks dramatically
help combat the starvation issue, by allowing each client the opportunity
to run even when the system is under heavy throughput load (within the
constraints of the user selected priority).

v2: Mark the preempted request as the start of a new flow, to prevent a
single client being continually gazumped by its peers.

Testcase: igt/benchmarks/rrul
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181001144755.7978-1-chris@chris-wilson.co.uk

drm/i915: Pass intel_encoder to infoframe functions

Make life simpler by passing around intel_encoder instead of
drm_encoder.

@r1@
identifier F =~ "infoframe";
identifier I, M;
@@
F(
- struct drm_encoder *I
+ struct intel_encoder *I
  , ...)
{
<...
(
- I->M
+ I->base.M
|
- I
+ &I->base
)
...>
}

@r2@
identifier F =~ "infoframe";
identifier I;
type T, ST;
@@
ST {
...
T (*F)(
-        struct drm_encoder *I
+        struct intel_encoder *encoder
       , ...);
...
};

@@
identifier r1.F;
expression E;
@@
F(
- E
+ to_intel_encoder(E)
  ,...)

@@
identifier r2.F;
expression E, X;
@@
(
X.F(
-   E
+   to_intel_encoder(E)
    ,...)
|
X->F(
-    E
+    to_intel_encoder(E)
     ,...)
)

@@
expression E;
@@
(
- to_intel_encoder(&E->base)
+ E
|
- to_intel_encoder(&E->base.base)
+ &E->base
)

@@
identifier D, M;
expression E;
@@
 D = enc_to_dig_port(&E->base)
<...
(
- D->base.M
+ E->M
|
- &D->base
+ E
)
...>

@@
identifier D;
expression E;
type T;
@@
- T D = enc_to_dig_port(E);
... when != D

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180920185145.1912-10-ville.syrjala@linux.intel.com
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Use memmove() for punching the hole into infoframes

Replace the hand rolled memmove() with the real thing.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180920185145.1912-9-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Combine multiple internal plists into the same i915_priolist bucket

As we are about to allow ourselves to slightly bump the user priority
into a few different sublevels, packthose internal priority lists
into the same i915_priolist to keep the rbtree compact and avoid having
to allocate the default user priority even after the internal bumping.
The downside to having an requests[] rather than a node per active list,
is that we then have to walk over the empty higher priority lists. To
compensate, we track the active buckets and use a small bitmap to skip
over any inactive ones.

v2: Use MASK of internal levels to simplify our usage.
v3: Prevent overflow when SHIFT is zero.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181001123204.23982-4-chris@chris-wilson.co.uk

drm/i915: Reserve some priority bits for internal use

In the next few patches, we will want to give a small priority boost to
some requests/queues but not so much that we perturb the user controlled
order. As such we will shift the user priority bits higher leaving
ourselves a few low priority bits for our internal bumping.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181001123204.23982-3-chris@chris-wilson.co.uk

drm/i915/selftests: Include arbitration points in preemption smoketest

Include a batch full of a page of arbitration points in order to provide
a window for inject_preempt_context() in the preemption smoketests.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181001123204.23982-2-chris@chris-wilson.co.uk

drm/i915/selftests: Split preemption smoke test into threads

When submitting chains to each engine, we can do so (mostly) in
parallel, so delegate submission to threads on a per-engine basis.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181001123204.23982-1-chris@chris-wilson.co.uk

drm/i915/dp: optimize eDP 1.4+ link config fast and narrow

We've opted to use the maximum link rate and lane count for eDP panels,
because typically the maximum supported configuration reported by the
panel has matched the native resolution requirements of the panel, and
optimizing the link has lead to problems.

With eDP 1.4 rate select method and DSC features, this is decreasingly
the case. There's a need to optimize the link parameters. Moreover,
already eDP 1.3 states fast link with fewer lanes is preferred over the
wide and slow. (Wide and slow should still be more reliable for longer
cable lengths.)

Additionally, there have been reports of panels failing on arbitrary
link configurations, although arguably all configurations they claim to
support should work.

Optimize eDP 1.4+ link config fast and narrow.

Side note: The implementation has a near duplicate of the link config
function, with just the two inner for loops turned inside out. Perhaps
there'd be a way to make this, say, more table driven to reduce the
duplication, but seems like that would lead to duplication in the table
generation. We'll also have to see how the link config optimization for
DSC turns out.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Cc: "Lee, Shawn C" <shawn.c.lee@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105267
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180905095321.13843-1-jani.nikula@intel.com

drm/i915/dp: Fix duplication of DEVICE_SERVICE_IRQ handling

There are two copies of the same code called from long and short
pulse handlers.

v2: Rebase due to s/int status/enum drm_connector_status in
intel_dp_detect()
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180927205735.16651-6-dhinakaran.pandiyan@intel.com

drm/i915/dp: Kill intel_dp->detect_done flag

The intel_dp->detect_done flag is no more useful. Pull
intel_dp_long_pulse() into the lone caller,

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180927205735.16651-5-dhinakaran.pandiyan@intel.com

drm/i915/dp: Do not grab crtc modeset lock in intel_dp_detect()

A crtc modeset lock was added for link retraining but
intel_dp_retrain_link() knows to take the necessary locks since
commit c85d200e8321 ("drm/i915: Move SST DP link retraining into the
->post_hotplug() hook")
v2: Drop AUX power domain reference in the early return path

Fixes: c85d200e8321 ("drm/i915: Move SST DP link retraining into the ->post_hotplug() hook")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180927205735.16651-4-dhinakaran.pandiyan@intel.com

drm/i915/dp: Use a local variable for intel_encoder *

We have two cases of intel_dp to intel_encoder conversions, use a
local variable to store the conversion.

Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180927205735.16651-3-dhinakaran.pandiyan@intel.com

drm/i915/dp: Restrict link retrain workaround to external monitors

Commit '3cf71bc9904d ("drm/i915: Re-apply "Perform link quality check,
unconditionally during long pulse"")' applies a work around for sinks
that don't signal link loss. The work around does not need to have to be
that broad as the issue was seen with only one particular monitor; limit
this only for external displays as eDP features like PSR turn off the link
and the driver ends up retraining the link seeeing that link is not
synchronized.

Cc: Lyude Paul <lyude@redhat.com>
Cc: Jan-Marek Glogowski <glogow@fbihome.de>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
References: 3cf71bc9904d ("drm/i915: Re-apply "Perform link quality check, unconditionally during long pulse"")
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180927205735.16651-2-dhinakaran.pandiyan@intel.com

drm/i915/dp: Fix link retraining comment in intel_dp_long_pulse()

Comment claims link needs to be retrained because the connected sink raised
a long pulse to indicate link loss. If the sink did so,
intel_dp_hotplug() would have handled link retraining. Looking at the
logs in Bugzilla referenced in commit '3cf71bc9904d ("drm/i915: Re-apply
Perform link quality check, unconditionally during long pulse"")', the
issue is that the sink does not trigger an interrupt. What we want is
->detect() from user space to check link status and retrain. Ville's
review for the original patch also indicates the same root cause. So,
rewrite the comment.

v2: Patch split and rewrote comment.

Cc: Lyude Paul <lyude@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jan-Marek Glogowski <glogow@fbihome.de>
References: 3cf71bc9904d ("drm/i915: Re-apply "Perform link quality check, unconditionally during long pulse"")
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180927205735.16651-1-dhinakaran.pandiyan@intel.com

drm/i915/execlists: Avoid kicking priority on the current context

If the request is currently on the HW (in port 0), then we do not need
to kick the submission tasklet to evaluate whether we should be
preempting itself in order to execute it again.

In the case that was annoying me:

   execlists_schedule: rq(18:211173).prio=0 -> 2
   need_preempt: last(18:211174).prio=0, queue.prio=2

We are bumping the priority of the first of a pair of requests running
in the current context. Then when evaluating preempt, we would see that
that our priority request is higher than the last executing request in
ELSP0 and so trigger preemption, not realising that our intended request
was already executing.

v2: As we assume state of the execlists->port[] that is only valid while
we hold the timeline lock we have to repeat some earlier tests that on
the validity of the node.
v3: Wrap guc submission under the timeline.lock as is now the way of all
things.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180925083205.2229-2-chris@chris-wilson.co.uk