drm/bridge: dumb-vga-dac: Provide ddc symlink in connector sysfs directory

Use the ddc pointer provided by the generic connector.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ebb75e71b8b7c8d65d54a947a03fd21b8969fb3a.1564161140.git.andrzej.p@collabora.com

drm/ast: Provide ddc symlink in connector sysfs directory

Use the ddc pointer provided by the generic connector.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ff968add8074d109aeed02f0708edd85138246c3.1564161140.git.andrzej.p@collabora.com

drm/mgag200: Provide ddc symlink in connector sysfs directory

Use the ddc pointer provided by the generic connector.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d9e8d4281f6778e5598410a44f1b29c85df1c16d.1564161140.git.andrzej.p@collabora.com

drm: sti: Provide ddc symlink in hdmi connector sysfs directory

Use the ddc pointer provided by the generic connector.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/510765aff8ef99683aa2da48bd08004376b1980a.1564161140.git.andrzej.p@collabora.com

drm/imx: imx-tve: Provide ddc symlink in connector's sysfs

Use the ddc pointer provided by the generic connector.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1c660776741760b8094484268b670a09da8a9042.1564161140.git.andrzej.p@collabora.com

drm/imx: imx-ldb: Provide ddc symlink in connector's sysfs

Use the ddc pointer provided by the generic connector.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/bcfe39a0333df951a7d160b3a946c2c32e7eac7f.1564161140.git.andrzej.p@collabora.com

drm/sun4i: hdmi: Provide ddc symlink in sun4i hdmi connector sysfs directory

Use the ddc pointer provided by the generic connector.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b5a8881b226a9af7d31eb6a57d7fe0fccdcb3a47.1564161140.git.andrzej.p@collabora.com

drm: Add drm_connector_init() variant with ddc

Allow passing ddc adapter pointer to the init function. Even if
drm_connector_init() sometime in the future decides to e.g. memset() all
connector fields to zeros, the newly added function ensures that at its
completion the ddc member of connector is correctly set.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3915224ae895240fd0973cf7f06b9d453e4d8520.1564161140.git.andrzej.p@collabora.com

drm: Add ddc link in sysfs created by drm_connector

Add generic code which creates symbolic links in sysfs, pointing to ddc
interface used by a particular video output. For example:

ls -l /sys/class/drm/card0-HDMI-A-1/ddc
lrwxrwxrwx 1 root root 0 Jun 24 10:42 /sys/class/drm/card0-HDMI-A-1/ddc \
-> ../../../../soc/13880000.i2c/i2c-2

This makes it easy for user to associate a display with its ddc adapter
and use e.g. ddcutil to control the chosen monitor.

This patch adds an i2c_adapter pointer to struct drm_connector. Particular
drivers can then use it instead of using their own private instance. If a
connector contains a ddc, then create a symbolic link in sysfs.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d470def6cd661b777faeee67b5838a4623c4010e.1564161140.git.andrzej.p@collabora.com

drm/gm12u320: Move driver to drm/tiny

Move the driver to the new haven for tiny DRM drivers.

Cc: Hans de Goede <hdegoede@redhat.com>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725105132.22545-4-noralf@tronnes.org

drm/tinydrm: Rename folder to tiny

The drm in tinydrm is superfluous so rename to tiny.

Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725105132.22545-3-noralf@tronnes.org

drm/tinydrm/Kconfig: Remove menuconfig DRM_TINYDRM

This makes the tiny drivers visible by default without having to enable a
knob.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com> to it once
Link: https://patchwork.freedesktop.org/patch/msgid/20190725105132.22545-2-noralf@tronnes.org

drm/prime: Ditch gem_prime_res_obj hook

Everyone is just using gem_object->resv now.

Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725132655.11951-5-daniel.vetter@ffwll.ch

drm/amdgpu: Fill out gem_object->resv

That way we can ditch our gem_prime_res_obj implementation. Since ttm
absolutely needs the right reservation object all the boilerplate is
already there and we just have to wire it up correctly.

Note that gem/prime doesn't care when we do this, as long as we do it
before the bo is registered and someone can call the handle2fd ioctl
on it.

Aside: ttm_buffer_object.ttm_resv could probably be ditched in favour
of always passing a non-NULL resv to ttm_bo_init(). At least for gem
drivers that would avoid having two of these, on in ttm_buffer_object
and the other in drm_gem_object, one just there for confusion.

Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Michel Dänzer" <michel.daenzer@amd.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Cc: Evan Quan <evan.quan@amd.com>
Cc: Sonny Jiang <sonny.jiang@amd.com>
Cc: Amber Lin <Amber.Lin@amd.com>
Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl>
Cc: Junwei Zhang <Jerry.Zhang@amd.com>
Cc: Thomas Zimmermann <contact@tzimmermann.org>
Cc: Samuel Li <Samuel.Li@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725132655.11951-4-daniel.vetter@ffwll.ch

drm/nouveau: Fill out gem_object->resv

That way we can ditch our gem_prime_res_obj implementation. Since ttm
absolutely needs the right reservation object all the boilerplate is
already there and we just have to wire it up correctly.

Note that gem/prime doesn't care when we do this, as long as we do it
before the bo is registered and someone can call the handle2fd ioctl
on it.

Aside: ttm_buffer_object.ttm_resv could probably be ditched in favour
of always passing a non-NULL resv to ttm_bo_init(). At least for gem
drivers that would avoid having two of these, on in ttm_buffer_object
and the other in drm_gem_object, one just there for confusion.

Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: nouveau@lists.freedesktop.org
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725132655.11951-3-daniel.vetter@ffwll.ch

drm/radeon: Fill out gem_object->resv

That way we can ditch our gem_prime_res_obj implementation. Since ttm
absolutely needs the right reservation object all the boilerplate is
already there and we just have to wire it up correctly.

Note that gem/prime doesn't care when we do this, as long as we do it
before the bo is registered and someone can call the handle2fd ioctl
on it.

Aside: ttm_buffer_object.ttm_resv could probably be ditched in favour
of always passing a non-NULL resv to ttm_bo_init(). At least for gem
drivers that would avoid having two of these, on in ttm_buffer_object
and the other in drm_gem_object, one just there for confusion.

Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725132655.11951-2-daniel.vetter@ffwll.ch

drm/rockchip: Make analogix_dp_atomic_check static

Fix sparse warning:

drivers/gpu/drm/bridge/analogix/analogix_dp_core.c:1151:5: warning:
 symbol 'analogix_dp_atomic_check' was not declared. Should it be static?

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190730150057.57388-1-yuehaibing@huawei.com

drm/syncobj: fix leaking dma_fence in drm_syncobj_query_ioctl

We need to check the context number instead if the previous sequence to detect
an error and if an error is detected we need to drop the reference to the
current fence or otherwise would leak it.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 27b575a9aa2f ("drm/syncobj: add timeline payload query ioctl v6")
Link: https://patchwork.freedesktop.org/patch/319123/

drm: sti: Mark expected switch fall-throughs

Mark switch cases where we are expecting to fall through.

This patch fixes the following warning (Building: arm):

drivers/gpu/drm/sti/sti_hdmi.c: In function ‘hdmi_audio_configure’:
drivers/gpu/drm/sti/sti_hdmi.c:851:13: warning: this statement may fall through [-Wimplicit-fallthrough=]
   audio_cfg |= HDMI_AUD_CFG_CH78_VALID;
drivers/gpu/drm/sti/sti_hdmi.c:852:2: note: here
  case 6:
  ^~~~
drivers/gpu/drm/sti/sti_hdmi.c:853:13: warning: this statement may fall through [-Wimplicit-fallthrough=]
   audio_cfg |= HDMI_AUD_CFG_CH56_VALID;
drivers/gpu/drm/sti/sti_hdmi.c:854:2: note: here
  case 4:
  ^~~~
drivers/gpu/drm/sti/sti_hdmi.c:855:13: warning: this statement may fall through [-Wimplicit-fallthrough=]
   audio_cfg |= HDMI_AUD_CFG_CH34_VALID | HDMI_AUD_CFG_8CH;
drivers/gpu/drm/sti/sti_hdmi.c:856:2: note: here
  case 2:
  ^~~~

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190729222752.GA20277@embeddedor

drm/mst: Fix sphinx warnings in drm_dp_msg_connector register functions

Fixes the following warnings:

../drivers/gpu/drm/drm_dp_mst_topology.c:1593: warning: Excess function parameter 'drm_connector' description in 'drm_dp_mst_connector_late_register'
../drivers/gpu/drm/drm_dp_mst_topology.c:1613: warning: Excess function parameter 'drm_connector' description in 'drm_dp_mst_connector_early_unregister'
../drivers/gpu/drm/drm_dp_mst_topology.c:1594: warning: Function parameter or member 'connector' not described in 'drm_dp_mst_connector_late_register'
../drivers/gpu/drm/drm_dp_mst_topology.c:1614: warning: Function parameter or member 'connector' not described in 'drm_dp_mst_connector_early_unregister'

Fixes: 562836a269e3 ("drm/dp_mst: Enable registration of AUX devices for MST ports")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190726142057.224121-1-sean@poorly.run

drm/rockchip: Use drm_atomic_helper_commit_tail_rpm

Now that we use the drm psr helpers, we no longer need to hand-roll our
atomic_commit_tail implementation. So use the helper

Changes in v2:
- None
Changes in v3:
- None
Changes in v4:
- None
Changes in v5:
- None

Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190228210939.83386-6-sean@poorly.run
Link to v2: https://patchwork.freedesktop.org/patch/msgid/20190326204509.96515-5-sean@poorly.run
Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-11-sean@poorly.run
Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-12-sean@poorly.run

Cc: Zain Wang <wzz@rock-chips.com>
Cc: Tomasz Figa <tfiga@chromium.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-12-sean@poorly.run

drm/rockchip: Don't fully disable vop on self refresh

Instead of fully disabling and re-enabling the vop on self refresh
transitions, only disable the active windows. This will speed up
self refresh exits substantially and is still a power-savings win.

This patch integrates portions of Zain's patch from here:
https://patchwork.kernel.org/patch/9615063/

Changes in v2:
- None
Changes in v3:
- None
Changes in v4:
- Adjust for preceding vop_win_disable changes
Changes in v5:
- None

Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190228210939.83386-5-sean@poorly.run
Link to v2: https://patchwork.freedesktop.org/patch/msgid/20190326204509.96515-4-sean@poorly.run
Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-10-sean@poorly.run
Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-11-sean@poorly.run

Cc: Zain Wang <wzz@rock-chips.com>
Cc: Tomasz Figa <tfiga@chromium.org>
Cc: Kristian H. Kristensen <hoegsberg@chromium.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-11-sean@poorly.run

drm/rockchip: Use vop_win in vop_win_disable instead of vop_win_data

Change the argument to vop_win_disable to vop_win to accomodate future
changes to the function.

Changes in v4:
- Added to the patchset
Changes in v5:
- None

Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-10-sean@poorly.run

Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-10-sean@poorly.run

drm/rockchip: Use the helpers for PSR

Instead of rolling our own implementation for tracking when PSR should
be [in]active, use the new self refresh helpers to do the heavy lifting.

Changes in v2:
- updated to reflect changes made in the helpers
Changes in v3:
- use the new atomic hooks to inspect crtc state instead of needing conn state (Daniel)
Changes in v4:
- Use Laurent's get_new_connector_for_encoder helper (Daniel)
- Exit vop disable early if it's already off
Changes in v5:
- Rebase on latest drm-misc-next
- Resolve conflict with s/edp_vsc_psr/dp_sdp/ rename
- Resolve conflict with drm_atomic.h header inclusion

Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190228210939.83386-4-sean@poorly.run
Link to v2: https://patchwork.freedesktop.org/patch/msgid/20190326204509.96515-3-sean@poorly.run
Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-9-sean@poorly.run
Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-9-sean@poorly.run

Cc: Zain Wang <wzz@rock-chips.com>
Cc: Tomasz Figa <tfiga@chromium.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
[seanpaul resolved some conflicts with drmP.h work and Helen's async fixes]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-9-sean@poorly.run

drm/rockchip: Check for fast link training before enabling psr

Once we start shutting off the link during PSR, we're going to want fast
training to work. If the display doesn't support fast training, don't
enable psr.

Changes in v2:
- None
Changes in v3:
- None
Changes in v4:
- None
Changes in v5:
- None

Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190228210939.83386-3-sean@poorly.run
Link to v2: https://patchwork.freedesktop.org/patch/msgid/20190326204509.96515-2-sean@poorly.run
Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-9-sean@poorly.run
Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-8-sean@poorly.run

Cc: Zain Wang <wzz@rock-chips.com>
Cc: Tomasz Figa <tfiga@chromium.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-8-sean@poorly.run

drm/panel: jh057n00900: Use drm_panel_{unprepare, disable} consistently

We were already using the generic functions in our debugfs code, do the
same in jh057n_shutdown. This was suggested by Sam Ravnborg.

Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/a37dd5083462064f437ff62fd84e6576d8a7c8dc.1564146727.git.agx@sigxcpu.org

drm/panel: jh057n00900: Print error code on all DRM_DEV_ERROR()s

Most of them had these already but two mere missing. This eases
debugging.

Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/6b237a570cb368dc4471fb8feb3a0441813cd576.1564146727.git.agx@sigxcpu.org

drm/panel: jh057n00900: Move mipi_dsi_dcs_set_display_off to disable()

This makes it symmetric with the panel init happening in enable().

Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/e2c31d34ce1f917065d590297e5115a4ca954874.1564146727.git.agx@sigxcpu.org

drm/panel: jh057n00900: Move panel DSI init to enable()

If the panel is wrapped in a panel_bridge it gets prepar()ed before the
upstream DSI bridge which can cause hangs (e.g. with imx-nwl since clocks
are not enabled yet). To avoid this move the panel's first DSI access to
enable() so the upstream bridge can prepare the DSI host controller in
it's pre_enable().

This is also in line with other panel drivers.

Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/12c3495b234952aafe11980a9e06cfd246134660.1564146727.git.agx@sigxcpu.org

video: amba-clcd: Spout an error if of_get_display_timing() gives an error

In the patch ("video: of: display_timing: Don't yell if no timing node
is present") we'll stop spouting an error directly in
of_get_display_timing() if no node is present.  Presumably amba-clcd
should take charge of spouting its own error now.

NOTE: we'll print two errors if the node was present but there were
problems parsing the timing node (one in of_parse_display_timing() and
this new one).  Since this is a fatal error for the driver's probe
(and presumably someone will be debugging), this should be OK.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190722182439.44844-5-dianders@chromium.org

drm: panel-lvds: Spout an error if of_get_display_timing() gives an error

In the patch ("video: of: display_timing: Don't yell if no timing node
is present") we'll stop spouting an error directly in
of_get_display_timing() if no node is present.  Presumably panel-lvds
should take charge of spouting its own error now.

NOTE: we'll print two errors if the node was present but there were
problems parsing the timing node (one in of_parse_display_timing() and
this new one).  Since this is a fatal error for the driver's probe
(and presumably someone will be debugging), this should be OK.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190722182439.44844-4-dianders@chromium.org

video: of: display_timing: Don't yell if no timing node is present

There may be cases (like in panel-simple.c) where we have a sane
fallback if no timings are specified in the device tree.  Let's get
rid of the unconditional pr_err().  We can add error messages in
individual drivers if it makes sense.

NOTE: we'll still print errors if the node is present but there are
problems parsing the timings.

Fixes: b8a2948fa2b3 ("drm/panel: simple: Add ability to override typical timing")
Reported-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190722182439.44844-3-dianders@chromium.org

video: of: display_timing: Add of_node_put() in of_get_display_timing()

From code inspection it can be seen that of_get_display_timing() is
lacking an of_node_put().  Add it.

Fixes: ffa3fd21de8a ("videomode: implement public of_get_display_timing()")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190722182439.44844-2-dianders@chromium.org

drm/panel: simple: Add support for Sharp LD-D5116Z01B panel

The Sharp LD-D5116Z01B is a 12.3" eDP panel with a 1920X1280 resolution.

Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190708165811.46370-1-jeffrey.l.hugo@gmail.com

dt-bindings: panel: Add Sharp LD-D5116Z01B

The Sharp LD-D5116Z01B is a 12.3" eDP panel with a 1920X1280 resolution.

Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190708165753.46275-1-jeffrey.l.hugo@gmail.com

drm/panel: check failure cases in the probe func

The following function calls may fail and return NULL, so the null check
is added.
of_graph_get_next_endpoint
of_graph_get_remote_port_parent
of_graph_get_remote_port

Update: Thanks to Sam Ravnborg, for suggession on the use of goto to avoid
leaking endpoint.

Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190724195534.9303-1-navid.emamdoost@gmail.com

drm: Switch to use DEVFREQ_GOV_SIMPLE_ONDEMAND constant

Since governor name is defined by DEVFREQ framework internally, use the
macro definition instead of using the name directly.

Signed-off-by: Yue Hu <huyue2@yulong.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Jordan Crouse <jcrouse@codeaurora.org> for the msm part.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725035239.1192-1-zbestahu@gmail.com

drm/panfrost: Export all GPU feature registers

Midgard/Bifrost GPUs have a bunch of feature registers providing details
of what the hardware supports. Panfrost already reads these, this patch
exports them all to user space so that the jobs created by the user space
driver can be tuned for the particular hardware implementation.

Signed-off-by: Steven Price <steven.price@arm.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190724105626.53552-1-steven.price@arm.com

drm/amd/display: Implement MST Aux device registration

Implement late_register and early_unregister hooks for MST connectors.
Call drm helpers for MST connector registration, which registers the
AUX devices.

Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190723232808.28128-10-sunpeng.li@amd.com

drm/amd/display: Use connector kdev as aux device parent

Set the connector's kernel device as the parent for the aux kernel
device. This allows udev rules to access connector attributes when
creating symlinks to aux devices.

For example, the following udev rule:

SUBSYSTEM=="drm_dp_aux_dev", SUBSYSTEMS=="drm", ATTRS{edid}=="*",
SYMLINK+="drm_dp_aux/by-name/$id"

Will create the following symlinks using the connector's name:

$ ls /dev/drm_dp_aux/by-name/
card0-DP-1  card0-DP-2  card0-DP-3

Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190723232808.28128-6-sunpeng.li@amd.com

drm/nouveau: Use connector kdev as aux device parent

Set the connector's kernel device as the parent for the aux kernel
device. This allows udev rules to access connector attributes when
creating symlinks to aux devices.

Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190723232808.28128-4-sunpeng.li@amd.com

drm/dp_mst: Enable registration of AUX devices for MST ports

All available downstream ports - physical and logical - are exposed for
each MST device. They are listed in /dev/, following the same naming
scheme as SST devices by appending an incremental ID.

Although all downstream ports are exposed, only some will work as
expected. Consider the following topology:

               +---------+
               |  ASIC   |
               +---------+
              Conn-0|
                    |
               +----v----+
          +----| MST HUB |----+
          |    +---------+    |
          |                   |
          |Port-1       Port-2|
    +-----v-----+       +-----v-----+
    |  MST      |       |  SST      |
    |  Display  |       |  Display  |
    +-----------+       +-----------+
          |Port-1
          x

 MST Path  | MST Device
 ----------+----------------------------------
 sst:0     | MST Hub
 mst:0-1   | MST Display
 mst:0-1-1 | MST Display's disconnected DP out
 mst:0-1-8 | MST Display's internal sink
 mst:0-2   | SST Display

On certain MST displays, the upstream physical port will ACK DPCD reads.
However, reads on the local logical port to the internal sink will
*NAK*. i.e. reading mst:0-1 ACKs, but mst:0-1-8 NAKs.

There may also be duplicates. Some displays will return the same GUID
when reading DPCD from both mst:0-1 and mst:0-1-8.

There are some device-dependent behavior as well. The MST hub used
during testing will actually *ACK* read requests on a disconnected
physical port, whereas the MST displays will NAK.

In light of these discrepancies, it's simpler to expose all downstream
ports - both physical and logical - and let the user decide what to use.

v3 changes:
* Change WARN_ON_ONCE -> DRM_ERROR on dpcd read errors
* Docstring and cosmetic fixes

v2 changes:

Moved remote aux device (un)registration to new mst connector late
register and early unregister helpers. Drivers should call these from
their own mst connector function hooks.

This is to solve an issue during driver unload, where mst connector
devices are unregistered before the remote aux devices are. In a setup
where aux devices are created as children of connector devices, the aux
device would be removed too early, and uncleanly. Doing so in
early_unregister solves this issue, as that is called before connector
unregistration.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190723232808.28128-3-sunpeng.li@amd.com

drm/dp: Use non-cyclic idr

In preparation for adding aux devices for DP MST, make the IDR
non-cyclic. That way, hotplug cycling MST devices won't needlessly
increment the minor version index.

Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190723232808.28128-2-sunpeng.li@amd.com

drm/via: drop use of drmP.h

Drop use of the deprecated drmP.h header.
While touching the files divide include files in blocks
and sort the files alphabetically.

v2:
- Replace all uses of DRM_WAIT_ON() with VIA_WAIT_ON()
  and thus avoiding to pull in drm_os_linux.h

v3:
- DRM_WAIT_ON replacement moved to earlier patch (Emil)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Cc: Kevin Brace <kevinbrace@gmx.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
Cc: Mike Marshall <hubcap@omnibond.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Michel Dänzer <michel@daenzer.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190723200944.17285-5-sam@ravnborg.org

drm/via: make via_drv.h self-contained

Added include of header files to make via_drv.h self-contained.

v3:
- Reworded changelog a little - to reflect that more than one
  header files are added

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Cc: Kevin Brace <kevinbrace@gmx.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
Cc: Mike Marshall <hubcap@omnibond.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Michel Dänzer <michel@daenzer.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190723200944.17285-4-sam@ravnborg.org

drm/via: copy DRM_WAIT_ON as VIA_WAIT_ON and use it

VIA_WAIT_ON() is a direct copy of DRM_WAIT_ON() from
drm_os_linux.h.
The copy is made so we can avoid the dependency on the legacy header.
A more involved approach had been to introduce wait_event_* but for this
legacy driver the simpler and more safe approach with a copy of the
macro was selected.
Added the relevant header files for the functions used in VIA_WAIT_ON.

v3:
- Updated users of DRM_WAIT_ON => VIA_WAIT_ON (Emil)
- Updated $subject (Emil)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Cc: Kevin Brace <kevinbrace@gmx.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
Cc: Mike Marshall <hubcap@omnibond.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Michel Dänzer <michel@daenzer.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190723200944.17285-3-sam@ravnborg.org

drm/via: drop use of DRM(READ|WRITE) macros

The DRM_READ, DRM_WRITE macros comes from the deprecated drm_os_linux.h
header file. Remove their use to remove this dependency.

Replace the use of the macros with static inline variants.

v4:
- Use a more standard via_write8_mask() function (Emil)

v3:
- Use static inline functions, rather than macros (Emil)
- Use dedicated mask variants for byte access (Emil)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Cc: Kevin Brace <kevinbrace@gmx.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
Cc: Mike Marshall <hubcap@omnibond.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Michel Dänzer <michel@daenzer.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190723200944.17285-2-sam@ravnborg.org

drm/bridge: sii902x: add audio graph card support

Implement get_dai_id callback of audio HDMI codec
to support ASoC audio graph card.
HDMI audio output has to be connected to sii902x port 3.
get_dai_id callback maps this port to ASoC DAI index 0.

Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Acked-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1562141052-26221-1-git-send-email-olivier.moysan@st.com

drm/bridge: sii902x: make audio mclk optional

The master clock on i2s bus is not mandatory,
as sii902X internal PLL can be used instead.
Make use of mclk optional.

Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Reviewed-by: Jyri Sarha <jsarha@ti.com>
Acked-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1563811560-29589-4-git-send-email-olivier.moysan@st.com

dt-bindings: display: sii902x: Change audio mclk binding

As stated in SiL9022/24 datasheet, master clock is not required for I2S.
Make mclk property optional in DT bindings.

Fixes: 3f18021f43a3 ("dt-bindings: display: sii902x: Add HDMI audio bindings")
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Reviewed-by: Jyri Sarha <jsarha@ti.com>
Acked-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1563811560-29589-3-git-send-email-olivier.moysan@st.com

drm/bridge: sii902x: fix missing reference to mclk clock

Add devm_clk_get call to retrieve reference to master clock.

Fixes: ff5781634c41 ("drm/bridge: sii902x: Implement HDMI audio support")
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Reviewed-by: Jyri Sarha <jsarha@ti.com>
Acked-by: Andrzej Hajda <a.hajda@samsung.com
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1563811560-29589-2-git-send-email-olivier.moysan@st.com

drm/stm: attach gem fence to atomic state

To properly synchronize with other devices the fence from the GEM
object backing the framebuffer needs to be attached to the atomic
state, so the commit work can wait on fence signaling.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190712084228.8338-1-l.stach@pengutronix.de

MAINTAINERS: Remove tinydrm entry

tinydrm is just a collection of tiny drivers now.
Add T: drm-misc entry for tinydrm drivers that lacks it.

Cc: David Lechner <david@lechnology.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: David Lechner <david@lechnology.com>
Acked-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190722104312.16184-10-noralf@tronnes.org

drm/tinydrm: Move mipi-dbi

This moves mipi-dbi to be a core helper with the name drm_mipi_dbi.

Fixup include's in drivers.
Move the docs entry and delete tinydrm.rst.
Delete the last tinydrm todo entry.

v2: Make DRM_MIPI_DBI tristate to enable it being built as a module.

Cc: Eric Anholt <eric@anholt.net>
Cc: David Lechner <david@lechnology.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: David Lechner <david@lechnology.com>
Acked-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190722104312.16184-9-noralf@tronnes.org

drm/tinydrm/mipi-dbi: Select DRM_KMS_HELPER

mipi-dbi uses several KMS helper functions but that build dependency is
not expressed. Select DRM_KMS_HELPER to fix that.

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: David Lechner <david@lechnology.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190722104312.16184-8-noralf@tronnes.org

drm/tinydrm/Kconfig: drivers: Select BACKLIGHT_CLASS_DEVICE

The mipi_dbi helper is missing a dependency on DRM_KMS_HELPER and putting
that in revealed this problem:

drivers/video/fbdev/Kconfig:12:error: recursive dependency detected!
drivers/video/fbdev/Kconfig:12: symbol FB is selected by DRM_KMS_FB_HELPER
drivers/gpu/drm/Kconfig:75:     symbol DRM_KMS_FB_HELPER depends on DRM_KMS_HELPER
drivers/gpu/drm/Kconfig:69:     symbol DRM_KMS_HELPER is selected by TINYDRM_MIPI_DBI
drivers/gpu/drm/tinydrm/Kconfig:11:     symbol TINYDRM_MIPI_DBI is selected by TINYDRM_HX8357D
drivers/gpu/drm/tinydrm/Kconfig:15:     symbol TINYDRM_HX8357D depends on BACKLIGHT_CLASS_DEVICE
drivers/video/backlight/Kconfig:144:    symbol BACKLIGHT_CLASS_DEVICE is selected by FB_BACKLIGHT
drivers/video/fbdev/Kconfig:187:        symbol FB_BACKLIGHT depends on FB

A symbol that selects DRM_KMS_HELPER can not depend on
BACKLIGHT_CLASS_DEVICE. The reason for this is that DRM_KMS_FB_HELPER
selects FB instead of depending on it.

The tinydrm drivers have somehow gotten away with depending on
BACKLIGHT_CLASS_DEVICE because DRM_TINYDRM selects DRM_KMS_HELPER and the
drivers depend on that symbol.

An audit shows that all DRM drivers that select DRM_KMS_HELPER and use
BACKLIGHT_CLASS_DEVICE, selects it:
  DRM_TILCDC, DRM_GMA500, DRM_SHMOBILE, DRM_NOUVEAU, DRM_FSL_DCU,
  DRM_I915, DRM_RADEON, DRM_AMDGPU, DRM_PARADE_PS8622

Documentation/kbuild/kconfig-language.txt has a note regarding select:
1. 'select should be used with care since it doesn't visit dependencies.'
   This is not a problem since BACKLIGHT_CLASS_DEVICE doesn't have any
   dependencies.
2. 'In general use select only for non-visible symbols'
   BACKLIGHT_CLASS_DEVICE is user visible.

The real solution to this would be to have DRM_KMS_FB_HELPER depend on the
user visible symbol FB. That is a can of worms I'm not willing to tackle.
I fear that such a change will result in me handling difficult fallouts
for the next weeks. So I'm following DRM suite here.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: David Lechner <david@lechnology.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190722104312.16184-7-noralf@tronnes.org

drm/tinydrm/mipi-dbi: Remove CMA helper dependency

mipi-dbi depends on the CMA helper through its use of
drm_fb_cma_get_gem_obj(). This is an unnecessary dependency to drag in for
drivers that only want to use the MIPI DBI interface part.
Avoid this by open coding the function.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: David Lechner <david@lechnology.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190722104312.16184-6-noralf@tronnes.org

drm/tinydrm: Split struct mipi_dbi in two

Split struct mipi_dbi into an interface part and a display pipeline part.
The interface part can be used by drivers that need to initialize the
controller, but that won't upload the framebuffer over this interface.

MIPI DBI supports 3 interface types:
- A. Motorola 6800 type parallel bus
- B. Intel 8080 type parallel bus
- C. SPI type with 3 options:

I've embedded the SPI type specifics in the mipi_dbi struct to avoid
adding unnecessary complexity. If more interface types will be supported
in the future, the type specifics might have to be split out.

Rename functions to match the new struct mipi_dbi_dev:
- drm_to_mipi_dbi() -> drm_to_mipi_dbi_dev().
- mipi_dbi_init*() -> mipi_dbi_dev_init*().

Cc: Eric Anholt <eric@anholt.net>
Cc: David Lechner <david@lechnology.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: David Lechner <david@lechnology.com>
Acked-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190722104312.16184-5-noralf@tronnes.org

drm/tinydrm: Rename remaining variable mipi -> dbidev

struct mipi_dbi is going to be split into an interface part and a display
pipeline part. The interface part can be used by drivers that need to
initialize the controller, but that won't upload the framebuffer over
this interface.

tinydrm uses the variable name 'mipi' but this is not a good name since
MIPI refers to a lot of standards. This patch changes the variable name
to 'dbidev' where it refers to the pipeline part of struct mipi_dbi.

Cc: Eric Anholt <eric@anholt.net>
Cc: David Lechner <david@lechnology.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: David Lechner <david@lechnology.com>
Acked-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190722104312.16184-4-noralf@tronnes.org

drm/tinydrm: Rename variable mipi -> dbi

struct mipi_dbi is going to be split into an interface part and a display
pipeline part. The interface part can be used by drivers that need to
initialize the controller, but that won't upload the framebuffer over
this interface.

tinydrm uses the variable name 'mipi' but this is not a good name since
MIPI refers to a lot of standards. This patch changes the variable name
to 'dbi' where it refers to the interface part of struct mipi_dbi.

Functions that use both future parts will have both variables temporarily
pointing to the same structure.

Cc: Eric Anholt <eric@anholt.net>
Cc: David Lechner <david@lechnology.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: David Lechner <david@lechnology.com>
Acked-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190722104312.16184-3-noralf@tronnes.org

drm/tinydrm/mipi-dbi: Move cmdlock mutex init

cmdlock protects command execution so put it in mipi_dbi_spi_init()
where it conceptually belongs.
This is prep work for the splitting of struct mipi_dbi.

Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190722104312.16184-2-noralf@tronnes.org

drm/mgag200: Don't unpin the current cursor image's buffer.

Currently the displayed cursor buffer might be evicted from video memory.
Not unpinning the BO fixes this problem. At this point, pixels_current
also references the BO and it will be unpinned during the next cursor
update.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Fixes: 94dc57b10399 ("drm/mgag200: Rewrite cursor handling")
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190723075425.24028-4-tzimmermann@suse.de

drm/mgag200: Set cursor scanout address to correct BO

The hardware requires the correct memory address of the buffer. Currently
the same BO's address is programmed unconditionally, so only every second
cursor update actually becomes visible.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Fixes: 94dc57b10399 ("drm/mgag200: Rewrite cursor handling")
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190723075425.24028-3-tzimmermann@suse.de

drm/mgag200: Pin displayed cursor BO to video memory

The cursor BO has to be pinned to video ram while it's being displayed.
With the current code, the BO might be pinned to system memory instead.
The patch fixes this problem.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Fixes: 94dc57b10399 ("drm/mgag200: Rewrite cursor handling")
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190723075425.24028-2-tzimmermann@suse.de

video: ssd1307fb: Add devicetree configuration of display setup

Various displays have differences that only mean initializing the display
driver IC with different fixed register values. Defining these in
devicetree offers easier way to adapt the driver to new displays than
requiring a patch to the kernel.

This adds devicetree properties needed to make the initialization match
the example setup as offered by Densitron for their 128x36 display.

It also makes some old one bit parameter handling a little cleaner.

Signed-off-by: Marko Kohtala <marko.kohtala@okoko.fi>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Michal Vokáč <michal.vokac@ysoft.com>
[b.zolnierkie: fix parenthesis alignment]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618074111.9309-7-marko.kohtala@okoko.fi

dt-bindings: display: ssd1307fb: Add initialization properties

Document new bindings for adapting ssd1307fb driver to new displays.

Signed-off-by: Marko Kohtala <marko.kohtala@okoko.fi>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618074111.9309-6-marko.kohtala@okoko.fi

video: ssd1307fb: Handle width and height that are not multiple of 8

Some displays have dimensions that are not multiple of eight, for example
height of 36, but the driver divided the dimensions by 8. Defining display
to the next multiple of 8 is not good as then the display registers get
configured to dimensions that do not match. This contradicts intructions
by some display manufacturers.

Use DIV_ROUND_UP to multiple of 8 when needed so correct values can be
used.

The ssd1307fb_update_display bit reordering receives a simplification in
the process.

Signed-off-by: Marko Kohtala <marko.kohtala@okoko.fi>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618074111.9309-5-marko.kohtala@okoko.fi

video: ssd1307fb: Start page range at page_offset

The page_offset was only applied to the end of the page range. This caused
the display updates to cause a scrolling effect on the display because the
amount of data written to the display did not match the range display
expected.

Fixes: 301bc0675b67 ("video: ssd1307fb: Make use of horizontal addressing mode")
Signed-off-by: Marko Kohtala <marko.kohtala@okoko.fi>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618074111.9309-4-marko.kohtala@okoko.fi

video: ssd1307fb: Remove unneeded semicolons

coccicheck reported unneeded semicolons. Remove them.

Signed-off-by: Marko Kohtala <marko.kohtala@okoko.fi>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618074111.9309-3-marko.kohtala@okoko.fi

video: ssd1307fb: Use screen_buffer instead of screen_base

sparse reported incorrect type due to different address spaces.
The screen_base is __iomem, but the memory is not from a device so we can
use screen_buffer instead and avoid some type casts.

Signed-off-by: Marko Kohtala <marko.kohtala@okoko.fi>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618074111.9309-2-marko.kohtala@okoko.fi

video: fbdev-MMP: Remove call to memset after dma_alloc_coherent

In commit 518a2f1925c3
("dma-mapping: zero memory returned from dma_alloc_*"),
dma_alloc_coherent has already zeroed the memory.
So memset is not needed.

Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190715032017.7311-1-huangfq.daxian@gmail.com

video: fbdev: nvidia: Remove dead code

This is dead code since 3.15. If there is no plan to use it
further, this can be removed forever.

Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Antonino Daplas <adaplas@gmail.com>
Cc: Sabyasachi Gupta <sabyasachi.linux@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1562782586-3994-1-git-send-email-jrdr.linux@gmail.com

video: fbdev: nvidia: Remove extra return

Minor cleanup to remove extra return statement.

Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Antonino Daplas <adaplas@gmail.com>
Cc: Sabyasachi Gupta <sabyasachi.linux@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1562781795-3494-1-git-send-email-jrdr.linux@gmail.com

au1200fb: don't use DMA_ATTR_NON_CONSISTENT

au1200fb allocates DMA memory using DMA_ATTR_NON_CONSISTENT, but never
calls dma_cache_sync to synchronize the memory between the CPU and the
device.  If it was use on a not cache coherent bus that would be fatal,
but as far as I can tell from the naming and the mips platform
implementation it always is used in cache coherent systems.  Remove
the DMA_ATTR_NON_CONSISTENT flag, which is a no-op in that case.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190625121321.10197-1-hch@lst.de

fbmem: remove redundant assignment to err

Variable err is initialized to a value that is never read and it
is re-assigned later.  The initialization is redundant and can
be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190624223724.13629-1-colin.king@canonical.com

drm/tinydrm: Move tinydrm_display_pipe_init() to mipi-dbi

tinydrm_display_pipe_init() has only one user now, so move it to mipi-dbi.

Changes:
- Remove drm_connector_helper_funcs.detect, it's always connected.
- Store the connector and mode in mipi_dbi instead of it's own struct.

Otherwise remove some leftover tinydrm-helpers.h inclusions.

Cc: Eric Anholt <eric@anholt.net>
Cc: David Lechner <david@lechnology.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190719155916.62465-12-noralf@tronnes.org

drm/tinydrm/mipi-dbi: Add mipi_dbi_init_with_formats()

The MIPI DBI standard support more pixel formats than what this helper
supports. Add an init function that lets the driver use different
format(s). This avoids open coding mipi_dbi_init() in st7586.

st7586 sets preferred_depth but this is not necessary since it only
supports one format.

v2: Forgot to remove the mipi->rotation assignment in st7586,
    mipi_dbi_init_with_formats() handles it.

Cc: David Lechner <david@lechnology.com>
Acked-by: David Lechner <david@lechnology.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: David Lechner <david@lechnology.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190719155916.62465-11-noralf@tronnes.org

drm/tinydrm/repaper: Don't use tinydrm_display_pipe_init()

tinydrm.ko is going away so let's implement a connector.

Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190719155916.62465-10-noralf@tronnes.org

drm/tinydrm: Move tinydrm_machine_little_endian()

The tinydrm helper is going away so move it into the only user mipi-dbi.

Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190719155916.62465-9-noralf@tronnes.org

drm/tinydrm: Move tinydrm_spi_transfer()

This is only used by mipi-dbi drivers so move it there.

The reason this isn't moved to the SPI subsystem is that it will in a
later patch pass a dummy rx buffer for SPI controllers that need this.
Low memory boards (64MB) can run into a problem allocating such a "large"
contiguous buffer on every transfer after a long up time.
This leaves a very specific use case, so we'll keep the function here.
mipi-dbi will first go through a refactoring though, before this will
be done.

Remove SPI todo entry now that we're done with the tinydrm.ko SPI code.

v2: Drop moving the mipi_dbi_spi_init() declaration (Sam)

Cc: David Lechner <david@lechnology.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: : David Lechner <david@lechnology.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190719155916.62465-8-noralf@tronnes.org

drm/tinydrm: Clean up tinydrm_spi_transfer()

Prep work before moving the function to mipi-dbi.

tinydrm_spi_transfer() was made to support one class of drivers in
drivers/staging/fbtft that has not been converted to DRM yet, so strip
away the unused functionality:
- Start byte (header) is not used.
- No driver relies on the automatic 16-bit byte swapping on little endian
  machines with SPI controllers only supporting 8 bits per word.

Other changes:
- No need to initialize ret
- No need for the WARN since mipi-dbi only uses 8 and 16 bpw.
- Use spi_message_init_with_transfers()

Cc: David Lechner <david@lechnology.com>
Acked-by: : David Lechner <david@lechnology.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190719155916.62465-7-noralf@tronnes.org

drm/tinydrm: Remove tinydrm_spi_max_transfer_size()

spi-bcm2835 can handle >64kB buffers now so there is no need to check
->max_dma_len. The tinydrm_spi_max_transfer_size() max_len argument is
not used by any callers, so not needed.

Then we have the spi_max module parameter. It was added because
staging/fbtft has support for it and there was a report that someone used
it to set a small buffer size to avoid popping on a USB soundcard on a
Raspberry Pi. In hindsight it shouldn't have been added, I should have
waited for it to become a problem first. I don't know it anyone is
actually using it, but since tinydrm_spi_transfer() is being moved to
mipi-dbi, I'm taking the opportunity to remove it. I'll add it back to
mipi-dbi if someone complains.

With that out of the way, spi_max_transfer_size() can be used instead.

The chosen 16kB buffer size for Type C Option 1 (9-bit) interface is
somewhat arbitrary, but a bigger buffer will have a miniscule impact on
transfer speed, so it's probably fine.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190719155916.62465-6-noralf@tronnes.org

drm/tinydrm: Remove spi debug buffer dumping

The SPI event tracing can dump the buffer now so no need for this.
Remove the debug print from tinydrm_spi_transfer() since this info can be
gleaned from the trace event.

Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190719155916.62465-5-noralf@tronnes.org

drm/tinydrm: Use spi_is_bpw_supported()

This means that tinydrm_spi_bpw_supported() can be removed.

Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190719155916.62465-4-noralf@tronnes.org

drm/tinydrm: Use DRM_MODE_CONNECTOR_SPI

tinydrm drivers announce DRM_MODE_CONNECTOR_VIRTUAL for its SPI drivers.
Use the new SPI connector type instead.

X server will now list the connector as Unknown instead of Virtual:

X.Org X Server 1.19.2
Release Date: 2017-03-02
<...>
[ 53523.905] (II) modeset(0): Output Unknown19-1 has no monitor section
[ 53523.908] (II) modeset(0): EDID for output Unknown19-1
[ 53523.910] (II) modeset(0): Printing probed modes for output Unknown19-1
[ 53523.911] (II) modeset(0): Modeline "320x240"x0.0    0.00  320 320 320 320  240 240 240 240 (0.0 kHz eP)
[ 53523.911] (II) modeset(0): Output Unknown19-1 connected
[ 53523.912] (II) modeset(0): Using exact sizes for initial modes
[ 53523.912] (II) modeset(0): Output Unknown19-1 using initial mode 320x240 +0+0

I won't chase down and fix userspace, but the new connector type will
trickle out to userspace eventually.

v2: Split patch in core and driver changes, expand commit message (Daniel)

Cc: David Lechner <david@lechnology.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: David Lechner <david@lechnology.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190719155916.62465-3-noralf@tronnes.org

drm: Add SPI connector type

tinydrm drivers announce DRM_MODE_CONNECTOR_VIRTUAL for its SPI drivers.
Add a SPI connector type to match the actual connector.

X will list the connector as Unknown:

X.Org X Server 1.19.2
Release Date: 2017-03-02
<...>
[ 53523.905] (II) modeset(0): Output Unknown19-1 has no monitor section
[ 53523.908] (II) modeset(0): EDID for output Unknown19-1
[ 53523.910] (II) modeset(0): Printing probed modes for output Unknown19-1
[ 53523.911] (II) modeset(0): Modeline "320x240"x0.0    0.00  320 320 320 320  240 240 240 240 (0.0 kHz eP)
[ 53523.911] (II) modeset(0): Output Unknown19-1 connected
[ 53523.912] (II) modeset(0): Using exact sizes for initial modes
[ 53523.912] (II) modeset(0): Output Unknown19-1 using initial mode 320x240 +0+0

The weston source shows that it will be listed as UNNAMED.

v2: Split patch in core and driver changes, expand commit message (Daniel)

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: David Lechner <david@lechnology.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190719155916.62465-2-noralf@tronnes.org

fbdev: Ditch fb_edid_add_monspecs

It's dead code ever since

commit 34280340b1dc74c521e636f45cd728f9abf56ee2
Author: Geert Uytterhoeven <geert+renesas@glider.be>
Date:   Fri Dec 4 17:01:43 2015 +0100

    fbdev: Remove unused SH-Mobile HDMI driver

Also with this gone we can remove the cea_modes db. This entire thing
is massively incomplete anyway, compared to the CEA parsing that
drm_edid.c does.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Tavis Ormandy <taviso@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190721201956.941-1-daniel.vetter@ffwll.ch

drm/komeda: remove set but not used variable 'old'

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/gpu/drm/arm/display/komeda/komeda_plane.c:
 In function komeda_plane_atomic_duplicate_state:
drivers/gpu/drm/arm/display/komeda/komeda_plane.c:161:35:
 warning: variable old set but not used [-Wunused-but-set-variable

It is not used since commit 990dee3aa456 ("drm/komeda:
Computing image enhancer internally")

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190722055627.38008-1-yuehaibing@huawei.com

drm/i915: Fix up broken merge

Maxime didn't really compile-test this :-/

We need to re-apply

commit e4fa8457b2197118538a1400b75c898f9faaf164
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Fri Jun 14 22:35:25 2019 +0200

    drm/prime: Align gem_prime_export with obj_funcs.export

plus make sure i915_gem_dma_buf.c doesn't get zombie-resurrect. It
moved in

commit 10be98a77c558f8cfb823cd2777171fbb35040f6
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Tue May 28 10:29:49 2019 +0100

    drm/i915: Move more GEM objects under gem/

v2: Remember the selftests (Chris).

Fixes: 03b0f2ce735e ("Merge v5.3-rc1 into drm-misc-next")
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190722213759.26612-1-daniel.vetter@ffwll.ch

drm/bridge: Improve the help text for DRM_ANALOGIX_ANX78XX

Improve the help text for DRM_ANALOGIX_ANX78XX by adding the missing
"power" word.

After this change the help text matches with the ANX7814
product description from the Analogix website:

https://www.analogix.com/en/products/convertersbridges/anx7814

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190722194049.20761-1-festevam@gmail.com

Merge v5.3-rc1 into drm-misc-next

Noralf needs some SPI patches in 5.3 to merge some work on tinydrm.

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>

Linus 5.3-rc1

drm: Add Grain Media GM12U320 driver v2

Add a modesetting driver for Grain Media GM12U320 based devices
(primarily Acer C120 projector, but there may be compatible devices).

This is based on the fb driver from Viacheslav Nurmekhamitov:
https://github.com/slavrn/gm12u320

This driver uses drm_simple_display_pipe to deal with all the atomic
stuff, gem_shmem_helper functions for buffer management and
drm_fbdev_generic_setup for fbdev emulation, so that leaves the driver
itself with only the actual code for talking to the gm12u320 chip,
leading to a nice simple and clean driver.

Changes in v2:
-Add drm-misc tree to MAINTAINERS
-Drop mode_config.preferred_depth = 24 / fix fbdev support

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190721132525.10396-1-hdegoede@redhat.com

drm/fb: remove unused function: drm_gem_fbdev_fb_create()

After migrating several drivers to the generic fbdev
emulation there are no users left of drm_gem_fbdev_fb_create.
Delete the function.

Noticed that there was no callers while browsing
around in the drm_fb* code.

The code that referenced the function was removed by:
commit 13aff184ed9f ("drm/qxl: remove dead qxl fbdev emulation code")

The actual use was removed by:
commit 26d4707d445d ("drm/qxl: use generic fbdev emulation")

v2:
- Updated changelog based on feedback from Noralf

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190721140610.GA20842@ravnborg.org

Merge tag 'devicetree-fixes-for-5.3' of git://git./linux/kernel/git/robh/linux

Pull Devicetree fixes from Rob Herring:
 "Fix several warnings/errors in validation of binding schemas"

* tag 'devicetree-fixes-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: pinctrl: stm32: Fix missing 'clocks' property in examples
  dt-bindings: iio: ad7124: Fix dtc warnings in example
  dt-bindings: iio: avia-hx711: Fix avdd-supply typo in example
  dt-bindings: pinctrl: aspeed: Fix AST2500 example errors
  dt-bindings: pinctrl: aspeed: Fix 'compatible' schema errors
  dt-bindings: riscv: Limit cpus schema to only check RiscV 'cpu' nodes
  dt-bindings: Ensure child nodes are of type 'object'

Merge branch 'work.misc' of git://git./linux/kernel/git/viro/vfs

Pull vfs documentation typo fix from Al Viro.

* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  typo fix: it's d_make_root, not d_make_inode...

Merge tag '5.3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs fixes from Steve French:
 "Two fixes for stable, one that had dependency on earlier patch in this
  merge window and can now go in, and a perf improvement in SMB3 open"

* tag '5.3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update internal module number
  cifs: flush before set-info if we have writeable handles
  smb3: optimize open to not send query file internal info
  cifs: copy_file_range needs to strip setuid bits and update timestamps
  CIFS: fix deadlock in cached root handling

iommu/amd: fix a crash in iova_magazine_free_pfns

The commit b3aa14f02254 ("iommu: remove the mapping_error dma_map_ops
method") incorrectly changed the checking from dma_ops_alloc_iova() in
map_sg() causes a crash under memory pressure as dma_ops_alloc_iova()
never return DMA_MAPPING_ERROR on failure but 0, so the error handling
is all wrong.

   kernel BUG at drivers/iommu/iova.c:801!
    Workqueue: kblockd blk_mq_run_work_fn
    RIP: 0010:iova_magazine_free_pfns+0x7d/0xc0
    Call Trace:
     free_cpu_cached_iovas+0xbd/0x150
     alloc_iova_fast+0x8c/0xba
     dma_ops_alloc_iova.isra.6+0x65/0xa0
     map_sg+0x8c/0x2a0
     scsi_dma_map+0xc6/0x160
     pqi_aio_submit_io+0x1f6/0x440 [smartpqi]
     pqi_scsi_queue_command+0x90c/0xdd0 [smartpqi]
     scsi_queue_rq+0x79c/0x1200
     blk_mq_dispatch_rq_list+0x4dc/0xb70
     blk_mq_sched_dispatch_requests+0x249/0x310
     __blk_mq_run_hw_queue+0x128/0x200
     blk_mq_run_work_fn+0x27/0x30
     process_one_work+0x522/0xa10
     worker_thread+0x63/0x5b0
     kthread+0x1d2/0x1f0
     ret_from_fork+0x22/0x40

Fixes: b3aa14f02254 ("iommu: remove the mapping_error dma_map_ops method")
Signed-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hexagon: switch to generic version of pte allocation

The hexagon implementation pte_alloc_one(), pte_alloc_one_kernel(),
pte_free_kernel() and pte_free() is identical to the generic except of
lack of __GFP_ACCOUNT for the user PTEs allocation.

Switch hexagon to use generic version of these functions.

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'ntb-5.3' of git://github.com/jonmason/ntb

Pull NTB updates from Jon Mason:
 "New feature to add support for NTB virtual MSI interrupts, the ability
  to test and use this feature in the NTB transport layer.

  Also, bug fixes for the AMD and Switchtec drivers, as well as some
  general patches"

* tag 'ntb-5.3' of git://github.com/jonmason/ntb: (22 commits)
  NTB: Describe the ntb_msi_test client in the documentation.
  NTB: Add MSI interrupt support to ntb_transport
  NTB: Add ntb_msi_test support to ntb_test
  NTB: Introduce NTB MSI Test Client
  NTB: Introduce MSI library
  NTB: Rename ntb.c to support multiple source files in the module
  NTB: Introduce functions to calculate multi-port resource index
  NTB: Introduce helper functions to calculate logical port number
  PCI/switchtec: Add module parameter to request more interrupts
  PCI/MSI: Support allocating virtual MSI interrupts
  ntb_hw_switchtec: Fix setup MW with failure bug
  ntb_hw_switchtec: Skip unnecessary re-setup of shared memory window for crosslink case
  ntb_hw_switchtec: Remove redundant steps of switchtec_ntb_reinit_peer() function
  NTB: correct ntb_dev_ops and ntb_dev comment typos
  NTB: amd: Silence shift wrapping warning in amd_ntb_db_vector_mask()
  ntb_hw_switchtec: potential shift wrapping bug in switchtec_ntb_init_sndev()
  NTB: ntb_transport: Ensure qp->tx_mw_dma_addr is initaliazed
  NTB: ntb_hw_amd: set peer limit register
  NTB: ntb_perf: Clear stale values in doorbell and command SPAD register
  NTB: ntb_perf: Disable NTB link after clearing peer XLAT registers
  ...