Rafał Miłecki [Sun, 22 Mar 2015 01:56:47 +0000 (01:56 +0000)]
bcm53xx: refresh patches
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44931
John Crispin [Sat, 21 Mar 2015 21:48:18 +0000 (21:48 +0000)]
package-defaults.mk: set DISABLE_NLS only if not CONFIG_BUILD_NLS
set DISABLE_NLS only if CONFIG_BUILD_NLS NOT set.
like DISABLE_IPV6 which depends on CONFIG_IPV6
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
SVN-Revision: 44930
John Crispin [Sat, 21 Mar 2015 21:48:12 +0000 (21:48 +0000)]
kernel: Support kernel options required by systemd
These kernel options are all likely to be widely useful in this modern age, but
are immediately useful for systemd support.
c.f. http://sources.gentoo.org/cgi-bin/viewvc.cgi/gentoo-x86/sys-apps/systemd/systemd-9999.ebuild?&view=markup#l118
Adapted from a patch by Adam Porter.
Signed-off-by: Jeff Waugh <jdub@bethesignal.org>
SVN-Revision: 44929
John Crispin [Sat, 21 Mar 2015 21:48:04 +0000 (21:48 +0000)]
kernel: fix usb kernel package Makefile
Signed-off-by: zouxf <fl.service@t-firefly.com>
SVN-Revision: 44928
John Crispin [Sat, 21 Mar 2015 21:47:53 +0000 (21:47 +0000)]
build: define STAMP_CONFIGURED recursively
Defining STAMP_CONFIGURED statically caused it not to reflect changes to
PKG_CONFIG_DEPENDS made after including package.mk, like the additional options
added by feeds.mk for all packages.
Furthermore, as STAMP_CONFIGURED_WILDCARD was already defined recursively, the
patsubst in its definition would never match, and in consequence, the stamps
were never removed. This caused packages not to be rebuilt when they should have
been.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 44927
John Crispin [Sat, 21 Mar 2015 21:47:48 +0000 (21:47 +0000)]
perf: don't error on warnings
There are some places where there is a redundant declaration of
strlcpy() that prevents building perf otherwise.
Signed-off-by: John Szakmeister <john@szakmeister.net>
SVN-Revision: 44926
John Crispin [Sat, 21 Mar 2015 21:47:41 +0000 (21:47 +0000)]
curl: fix PKG_CONFIG_DEPENDS
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 44925
John Crispin [Sat, 21 Mar 2015 21:47:34 +0000 (21:47 +0000)]
lldpd: add Build/InstallDev rule
For using liblldpctl to talk to lldpd (via unix sockets).
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
SVN-Revision: 44924
John Crispin [Sat, 21 Mar 2015 21:47:20 +0000 (21:47 +0000)]
oxnas: remove pre kernel 3.18 support from pinctrl driver
just some pruning...
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 44923
John Crispin [Sat, 21 Mar 2015 21:47:03 +0000 (21:47 +0000)]
oxnas: add support for kernel 4.0
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 44922
John Crispin [Sat, 21 Mar 2015 21:46:47 +0000 (21:46 +0000)]
kernel: add two more missing config symbols
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 44921
Felix Fietkau [Sat, 21 Mar 2015 21:24:08 +0000 (21:24 +0000)]
brcm2708: remove a patch that was added in the stable update (fixes #19253)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44920
Steven Barth [Sat, 21 Mar 2015 18:28:08 +0000 (18:28 +0000)]
netifd: fix ipv6 route regression
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 44919
Felix Fietkau [Sat, 21 Mar 2015 12:08:07 +0000 (12:08 +0000)]
ramips: increase NAPI weight for mt7621 to improve routing performance a bit more
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44918
Rafał Miłecki [Sat, 21 Mar 2015 11:45:50 +0000 (11:45 +0000)]
kernel: backport bgmac patches
This allows dropping some hacky bcm53xx bgmac patch forcing link state.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44917
Rafał Miłecki [Sat, 21 Mar 2015 11:45:27 +0000 (11:45 +0000)]
bcm53xx: enable FIXED_PHY, we will need it for bgmac
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44916
Rafał Miłecki [Fri, 20 Mar 2015 23:57:35 +0000 (23:57 +0000)]
mac80211: include brcmfmac firmware for BCM43602
It can be found e.g. in Netgear R8000.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44915
Rafał Miłecki [Fri, 20 Mar 2015 22:36:28 +0000 (22:36 +0000)]
mac80211: update linux-firmware to 2015-03-20
It includes new Broadcom firmware files for brcmfmac.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44914
Felix Fietkau [Fri, 20 Mar 2015 22:13:34 +0000 (22:13 +0000)]
kernel: fix ipsec related regression in the netfilter rtcache patch
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44913
Felix Fietkau [Fri, 20 Mar 2015 17:01:06 +0000 (17:01 +0000)]
kernel: fix ipset related build error (#19231)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44912
Felix Fietkau [Fri, 20 Mar 2015 16:50:50 +0000 (16:50 +0000)]
build: add optional dependency on libssp to all non-kernel packages
When enabling SSP_SUPPORT, a lot of packages fail during compile phase
with the following error:
Package X is missing dependencies for the following libraries:
libssp.so.0
This can be solved by adding an optional dependency on libssp to all
those packages, but as there are quite a few packages both in OpenWrt
core and in the package repository, it might make sense to add this
optional dependency to all non-kernel packages, instead of polluting
lots of package dependency lines with it.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 44911
Felix Fietkau [Fri, 20 Mar 2015 16:24:14 +0000 (16:24 +0000)]
mac80211: merge a few performance enhancements
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44910
Felix Fietkau [Fri, 20 Mar 2015 16:24:06 +0000 (16:24 +0000)]
mac80211: update software queueing patch
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44909
Imre Kaloz [Fri, 20 Mar 2015 12:15:40 +0000 (12:15 +0000)]
mvebu: set default regdomain
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 44908
Imre Kaloz [Fri, 20 Mar 2015 12:13:11 +0000 (12:13 +0000)]
mac80211: fix 5ghz variable name
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 44907
Imre Kaloz [Fri, 20 Mar 2015 11:47:16 +0000 (11:47 +0000)]
mac80211: when looking for VHT, check 5GHz support as well
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 44906
Felix Fietkau [Fri, 20 Mar 2015 11:34:47 +0000 (11:34 +0000)]
tools: add back and update mm-macros, it is required for libsigc++
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44905
Felix Fietkau [Fri, 20 Mar 2015 11:01:26 +0000 (11:01 +0000)]
netfilter: clean up compatibility code for old kernels
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44904
Felix Fietkau [Fri, 20 Mar 2015 09:37:07 +0000 (09:37 +0000)]
ramips: fix LAN/WAN MAC address for WSR-600/1166
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44903
John Crispin [Fri, 20 Mar 2015 08:49:08 +0000 (08:49 +0000)]
octeon: add er8 sysupgrade support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44902
John Crispin [Fri, 20 Mar 2015 08:49:02 +0000 (08:49 +0000)]
octeon: Add MMC support for EdgeRouter ER8
this is a backport of a series posted on the lmo mailing list
Signed-off-by: Jonathan Thibault <jonathan@navigue.com>
SVN-Revision: 44901
Steven Barth [Fri, 20 Mar 2015 08:14:42 +0000 (08:14 +0000)]
openssl: biweekly critical security update
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 44900
Steven Barth [Fri, 20 Mar 2015 07:50:45 +0000 (07:50 +0000)]
netifd: device update fixes, improvements in policy routing
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 44899
Felix Fietkau [Thu, 19 Mar 2015 21:51:44 +0000 (21:51 +0000)]
ramips: fix WSR-1166 green power LED
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44898
Felix Fietkau [Thu, 19 Mar 2015 21:00:41 +0000 (21:00 +0000)]
uboot-envtools: add ramips wsr-600/1166 support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44897
Felix Fietkau [Thu, 19 Mar 2015 20:37:40 +0000 (20:37 +0000)]
igmpproxy: add names for default config lan/wan phyint sections to make it easier to refer to them from scripts
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44896
Michael Büsch [Thu, 19 Mar 2015 18:45:32 +0000 (18:45 +0000)]
omap24xx: Add basic config for linux-4.0
Also remove 3.3 config. It's broken and unsupported.
SVN-Revision: 44895
Steven Barth [Thu, 19 Mar 2015 15:46:03 +0000 (15:46 +0000)]
ipv6: fix throw routes
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 44894
Felix Fietkau [Thu, 19 Mar 2015 11:59:21 +0000 (11:59 +0000)]
kernel: remove bogus dependency of zram on !TARGET_ep93xx
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44893
Felix Fietkau [Thu, 19 Mar 2015 11:59:17 +0000 (11:59 +0000)]
kernel: remove obsolete kernel version dependencies
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44892
Felix Fietkau [Thu, 19 Mar 2015 11:59:09 +0000 (11:59 +0000)]
ifenslave: remove package, as it depends on obsolete kernels
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44891
Felix Fietkau [Thu, 19 Mar 2015 11:58:59 +0000 (11:58 +0000)]
kernel: remove linux 3.8 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44890
Felix Fietkau [Thu, 19 Mar 2015 11:58:54 +0000 (11:58 +0000)]
ep93xx: moved to targets feed
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44889
Felix Fietkau [Thu, 19 Mar 2015 11:58:48 +0000 (11:58 +0000)]
mpc52xx: moved to targets feed
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44888
Felix Fietkau [Thu, 19 Mar 2015 11:58:43 +0000 (11:58 +0000)]
mpc83xx: moved to targets feed
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44887
Felix Fietkau [Thu, 19 Mar 2015 11:58:35 +0000 (11:58 +0000)]
feeds.conf.default: add new targets feed
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44886
Felix Fietkau [Thu, 19 Mar 2015 11:58:30 +0000 (11:58 +0000)]
ar71xx: fix a double dereference in the unaligned access patch
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44885
Felix Fietkau [Thu, 19 Mar 2015 11:58:22 +0000 (11:58 +0000)]
x86_64: remove unused patch
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44884
Felix Fietkau [Thu, 19 Mar 2015 11:58:17 +0000 (11:58 +0000)]
ipset: use in-tree kernel modules to fix crash issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44883
Imre Kaloz [Thu, 19 Mar 2015 10:25:44 +0000 (10:25 +0000)]
mvebu: add Linux 4.0 support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 44882
Imre Kaloz [Thu, 19 Mar 2015 10:13:21 +0000 (10:13 +0000)]
generic/4.0: fix ubi EOF marker patch
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 44881
Imre Kaloz [Thu, 19 Mar 2015 10:11:20 +0000 (10:11 +0000)]
generic/4.0: add missing symbols
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 44880
John Crispin [Wed, 18 Mar 2015 20:08:27 +0000 (20:08 +0000)]
procd: update to latest git HEAD
fixes parameter handling in askfirst tool
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44879
John Crispin [Wed, 18 Mar 2015 20:08:21 +0000 (20:08 +0000)]
config: add function tracers
Adds menuconfig options for ftrace function tracers
Signed-off-by: Bryan Forbes <bryan@reigndropsfall.net>
SVN-Revision: 44878
Felix Fietkau [Wed, 18 Mar 2015 18:22:41 +0000 (18:22 +0000)]
kernel: replace GRO optimization patch with a new one that supports VLANs/bridges with different MAC addresses
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44877
Felix Fietkau [Wed, 18 Mar 2015 18:21:08 +0000 (18:21 +0000)]
kernel: bump to 3.14.35, 3.18.9, 3.19.1 and 4.0-rc4
also refresh generic patches for 3.14, 3.18, 3.19 and 4.0
targets might need a minor refresh as well, however, it looks
like everything still applies cleanly with occasional small
offsets.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 44876
Jonas Gorski [Wed, 18 Mar 2015 10:44:15 +0000 (10:44 +0000)]
b53: reverse duplex bit meaning for IMP state override register
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44875
Felix Fietkau [Tue, 17 Mar 2015 17:14:48 +0000 (17:14 +0000)]
kernel: remove the netfilter optimization that skips the filter table, it has caused too many issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44873
Felix Fietkau [Tue, 17 Mar 2015 17:14:43 +0000 (17:14 +0000)]
mac80211: add some improvements to the software queueing code
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44872
Felix Fietkau [Tue, 17 Mar 2015 11:16:45 +0000 (11:16 +0000)]
toolchain/kernel-headers: remove an obsolete patch directory
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44871
Felix Fietkau [Tue, 17 Mar 2015 10:11:04 +0000 (10:11 +0000)]
tools: remove leftover dependency line
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44870
Felix Fietkau [Tue, 17 Mar 2015 10:11:00 +0000 (10:11 +0000)]
tools: remove a bunch of unused automake macros
The feeds that use them have been unmaintained for a long time, and
something similar can easily be added as a regular host build package.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44869
John Crispin [Tue, 17 Mar 2015 09:44:14 +0000 (09:44 +0000)]
ralink: fix mt7621 i2c name
Signed-off-by: zouxf <fl.service@t-firefly.com>
SVN-Revision: 44868
John Crispin [Tue, 17 Mar 2015 09:44:06 +0000 (09:44 +0000)]
lantiq/xrx200: cleanup default packages
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44867
John Crispin [Tue, 17 Mar 2015 09:43:56 +0000 (09:43 +0000)]
ar71xx: adjust OM5P profile for the OpenMesh OM5P-AN board
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 44866
John Crispin [Tue, 17 Mar 2015 09:43:52 +0000 (09:43 +0000)]
package/uboot-envtools: add OpenMesh OM5P-AN support
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 44865
John Crispin [Tue, 17 Mar 2015 09:43:47 +0000 (09:43 +0000)]
package/om-watchdog: add OpenMesh OM5P-AN support
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 44864
John Crispin [Tue, 17 Mar 2015 09:43:37 +0000 (09:43 +0000)]
ar71xx: enable sysupgrade for the OpenMesh OM5P-AN
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 44863
John Crispin [Tue, 17 Mar 2015 09:43:31 +0000 (09:43 +0000)]
ar71xx: add user-space support for the OpenMesh OM5P-AN
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 44862
John Crispin [Tue, 17 Mar 2015 09:43:19 +0000 (09:43 +0000)]
ar71xx: add kernel support for the OpenMesh OM5P-AN board
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 44861
John Crispin [Tue, 17 Mar 2015 09:43:13 +0000 (09:43 +0000)]
ar71xx: detect GL.iNet model
There are two versions of the GL.iNet, the 6408A and the 6416A. The only
difference is the flash size.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 44860
John Crispin [Tue, 17 Mar 2015 09:43:07 +0000 (09:43 +0000)]
igmpproxy: Multiple downlink interfaces fix.
from Erik Tews <erik@datenzone.de>
This patch has two effects. First, the quickleave feature/behaviour is
disabled for all groups that are used on more than one interface. The
idea of quickleave is to leave a group fast and later figure out whether
there is still somebody interested in that group. For groups used on
more than one interface, it is already known that there is still
somebody interested in that group.
Second, when a leave is received for a group that is used on more than
one interface, igmpproxy sends queries on all interface to discover
remeining listeners for that group. Previously these queries were only
send on the interface the leave was received on, so that listeners on
the other interfaces were not discovered and the group might be left on
the upstream router incorrectly.
This patch can be improved by sending the queries only on the interface
the leave was received on and adapting the algorithm in
internAgeRoute(...) in rttable.c in a way that only one interface is
actually processed and all other interfaces of the route are silently
assumed to be still active.
Signed-off-by: Erik Tews <erik@datenzone.de>
SVN-Revision: 44859
John Crispin [Tue, 17 Mar 2015 09:43:01 +0000 (09:43 +0000)]
ltq-hcd: remove ar10 and vr9 support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44858
John Crispin [Tue, 17 Mar 2015 09:42:56 +0000 (09:42 +0000)]
lantiq: make xrx200 targets use the upstream dwc2 driver
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44857
Felix Fietkau [Tue, 17 Mar 2015 07:24:51 +0000 (07:24 +0000)]
kernel: add a few more missing config symbols
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44856
Rafał Miłecki [Tue, 17 Mar 2015 07:07:17 +0000 (07:07 +0000)]
brcm47xx: support SPROM/NVRAM prefixes
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44855
Rafał Miłecki [Tue, 17 Mar 2015 07:07:00 +0000 (07:07 +0000)]
brcm47xx: rename (and refresh) MTD patch for safety "nvram" partition
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44854
Rafał Miłecki [Mon, 16 Mar 2015 23:05:43 +0000 (23:05 +0000)]
brcm47xx: switch to 3.18
Tested on BCM5357B0, BCM47186B0 and BCM4706.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44853
Rafał Miłecki [Mon, 16 Mar 2015 22:24:56 +0000 (22:24 +0000)]
bcm53xx: switch to 3.18
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44852
Felix Fietkau [Mon, 16 Mar 2015 21:17:45 +0000 (21:17 +0000)]
x86: refresh kvm_guest kernel config
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44851
Felix Fietkau [Mon, 16 Mar 2015 21:17:41 +0000 (21:17 +0000)]
kernel: add missing config symbol
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44850
Felix Fietkau [Mon, 16 Mar 2015 21:00:14 +0000 (21:00 +0000)]
x86: enable rtl8139 ethernet support for geode by default
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44849
Florian Fainelli [Mon, 16 Mar 2015 19:51:17 +0000 (19:51 +0000)]
brcm63xx: switch maintainer
Make Jonas the maintainer of brcm63xx.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 44848
Felix Fietkau [Mon, 16 Mar 2015 18:10:17 +0000 (18:10 +0000)]
geode: set target to Geode GX1 to support older chips
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44847
Jonas Gorski [Mon, 16 Mar 2015 13:37:38 +0000 (13:37 +0000)]
brcm63xx: use consistent gpio chip labeling for OF/non-OF
Ensure gpio chips are always labeled the same; this allows simplifying
any arch setup gpio lookups.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44846
Felix Fietkau [Mon, 16 Mar 2015 13:05:49 +0000 (13:05 +0000)]
ltq-adsl-mei: fix bugs in linux 3.18 compatiblity change
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44845
Felix Fietkau [Mon, 16 Mar 2015 13:05:42 +0000 (13:05 +0000)]
ltq-adsl: fix bugs in linux 3.18 compatiblity change
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44844
Nicolas Thill [Mon, 16 Mar 2015 12:32:22 +0000 (12:32 +0000)]
packages: more (e)glibc fixes after r44701
_GNU_SOURCE has been declared "deprecated" in favor of _DEFAULT_SOURCE in glibc
Signed-off-by: Nicolas Thill <nico@openwrt.org>
SVN-Revision: 44843
Nicolas Thill [Mon, 16 Mar 2015 12:25:06 +0000 (12:25 +0000)]
packages: some (e)glibc fixes after r44701
Signed-off-by: Nicolas Thill <nico@openwrt.org>
SVN-Revision: 44842
Jonas Gorski [Mon, 16 Mar 2015 11:53:22 +0000 (11:53 +0000)]
brcm63xx: switch to 3.18
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44841
Jonas Gorski [Mon, 16 Mar 2015 11:53:14 +0000 (11:53 +0000)]
brcm63xx: call brcm63xx_detect explicitly
Now that we have converted all users of global variables to use
brcm63xx_board_name, we can savely convert the implicit call to detect
in brcm63xx.sh to a single, explicit call in preinit.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44840
Jonas Gorski [Mon, 16 Mar 2015 11:53:06 +0000 (11:53 +0000)]
brcm63xx: move preinit ifname detection to the preinit script
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44839
Jonas Gorski [Mon, 16 Mar 2015 11:52:57 +0000 (11:52 +0000)]
brcm63xx: remove obsolete brcm63xx_has_reset_button
r37000 made button kmods loaded from generic code, so we don't use
it anymore for deciding to load them.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44838
Jonas Gorski [Mon, 16 Mar 2015 11:52:49 +0000 (11:52 +0000)]
brcm63xx: set status leds from within diag.sh
Instead of setting them up on invocation of brcm63xx_detect, set them
when calling diag.sh based.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44837
Jonas Gorski [Mon, 16 Mar 2015 11:52:42 +0000 (11:52 +0000)]
brcm63xx: switch to board_name based configuration
Board IDs are not unique, so in preparation for depricating them, always
use board_name for any (default) configuration decisions.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44836
Jonas Gorski [Mon, 16 Mar 2015 11:52:35 +0000 (11:52 +0000)]
brcm63xx: add missing board_ids to legacy_detect
These boards do not have a corresponding dts file yet.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44835
Jonas Gorski [Mon, 16 Mar 2015 11:52:26 +0000 (11:52 +0000)]
brcm63xx: add device tree based board detection
Use the device tree model property for detecting the board instead
of board id from nvram if present.
Since we can now directly detect the DVA-G3810BN, we can remove the
extra check for it.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44834
Jonas Gorski [Mon, 16 Mar 2015 11:52:20 +0000 (11:52 +0000)]
brcm63xx: populate /tmp/sysinfo
Take full board name from devicetree, if present. Provide a method
for retrieving the board name.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44833
Jonas Gorski [Mon, 16 Mar 2015 11:52:16 +0000 (11:52 +0000)]
brcm63xx: base-files: rename board_name to board_id
Rename board_name to board_id to prepare for using board_name as a
proper name for the board.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44832
Jonas Gorski [Mon, 16 Mar 2015 11:52:10 +0000 (11:52 +0000)]
brcm63xx: Add DGND3700 v1 / DGND3800B support
This adds support for the Netgear DGND3700 v1 and DGND3800B.
DGND3700 v1 and DGND3800B are exactly the same router, only one difference,
the factory firmware. This patch produces two factory firmwares for each router.
The router includes an onboard NAND flash for extra storage. NAND is currently
not supported in bcm63xx, so no code added for this part. The NOR flash (32MB)
is enough for storing an openwrt firmware.
Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
[jogo: Add back commit message from v1]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44831
projects / openwrt / staging / wigyori.git / log