Manasi Navare [Fri, 13 Jul 2018 19:43:13 +0000 (12:43 -0700)]
drm/i915/icl: Add remaining registers and bitfields for MG PHY DDI
This patch adds the remaining register definitions and bit fields
required for MG PHy DDI buffer initializations and voltage
swing programming for MG PHy DDI ports.
While at it this patch also fixes the naming for previously defined
MG PHY registers in original commit id (
c92f47b5ec977a "drm/i915/icl:
Add register defs for voltage swing sequences for MG PHY DDI").
Since the MG PHY registers are first defined in ICL platform, there
is no need for _ICL prefix.
v4 (from Paulo): add two white spaces to CRI_CALCINIT too.
v3:
* Fix register names, add spaces for MASK defines, correct the order
of #defines (Paulo)
v2:
* Change the MG_TX_DRVCTL registers names to match the spec (Anusha)
Cc: James Ausmus <james.ausmus@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1531510993-6606-1-git-send-email-manasi.d.navare@intel.com
Chris Wilson [Fri, 20 Jul 2018 11:11:02 +0000 (12:11 +0100)]
drm/i915: Show stack (by WARN) for hitting forcewake errors
On Sandybridge, we need a workaround to wait for the CPU thread to wake
up before we are sure that we have enabled the GT power well. However,
we do see the errors being reported and failed reads returning spurious
results. To try and capture more details as it fails, promote the error
into a WARN so we grab the stacktrace, and to try and reduce the
frequency of error increase the timeout from 500us to 5ms.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180720111102.11549-1-chris@chris-wilson.co.uk
Chris Wilson [Sat, 21 Jul 2018 12:50:37 +0000 (13:50 +0100)]
drm/i915: Pull unpin map into vma release
A reasonably common operation is to pin the map of the vma alongside the
vma itself for the lifetime of the vma, and so release both pins at the
same time as destroying the vma. It is common enough to pull into the
release function, making that central function more attractive to a
couple of other callsites.
The continual ulterior motive is to sweep over errors on module load
aborting...
Testcase: igt/drv_module_reload/basic-reload-inject
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180721125037.20127-1-chris@chris-wilson.co.uk
Nathan Ciobanu [Fri, 20 Jul 2018 21:44:13 +0000 (14:44 -0700)]
drm/i915/dp: Refactor max_vswing_tries variable
Changes the type and renames the max_vswing_tries variable
which was declared as an integer but used as a boolean
making it easy to be confused with a counter.
Changes in v2:
- updated the title and commit message
- left the loop exit point in place
v3: fix typo in title
v4: renamed max_vswing to max_vswing_reached (Ville)
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Marc Herbert <marc.herbert@intel.com>
Signed-off-by: Nathan Ciobanu <nathan.d.ciobanu@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180720214413.29506-2-rodrigo.vivi@intel.com
Nathan Ciobanu [Fri, 20 Jul 2018 21:44:12 +0000 (14:44 -0700)]
drm/i915/dp: Limit link training clock recovery loop
Limit the link training clock recovery loop to 10 attempts at
LANEx_CR_DONE per DP 1.4 spec section 3.5.1.2.2 and 80 attempts for
pre-DP 1.4 (4 voltage levels x 4 preemphasis levels x
x 5 identical voltages tries). Some faulty USB-C MST hubs can
cause us to get stuck in this loop indefinitely requesting something
like:
voltage swing: 0, pre-emphasis level: 2
voltage swing: 1, pre-emphasis level: 2
voltage swing: 0, pre-emphasis level: 3
over and over so max_vswing would never be reached,
drm_dp_clock_recovery_ok() would never return true and voltage_tries
would always get reset to 1. The driver sends those values to the hub
but the hub keeps requesting new values every time.
Changes in v2:
- updated commit message (DK, Manasi)
- defined DP_DP14_MAX_CR_TRIES (Marc)
- made the loop iterate for max 10 times (Rodrigo, Marc)
Changes in v3:
- changed error message to use DP_DP14_MAX_CR_TRIES
Changes in v4:
- Updated the title to reflect the change
- Updated the commit message
- Added 80 attempts for pre-DP 1.4 devices
Changes in v5:
- Removed DP_DP14_MAX_CR_TRIES from drm
v6: Updated comment to match kernel style (Rodrigo)
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Marc Herbert <marc.herbert@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Nathan Ciobanu <nathan.d.ciobanu@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180720214413.29506-1-rodrigo.vivi@intel.com
Michał Winiarski [Thu, 12 Jul 2018 15:53:30 +0000 (17:53 +0200)]
drm/i915/kvmgt: Fix compilation error
gvt_pin_guest_page extracted some of the gvt_dma_map_page functionality:
commit
79e542f5af79 ("drm/i915/kvmgt: Support setting dma map for huge pages")
And yet, part of it was reintroduced in:
commit
39b4cbadb9a9 ("drm/i915/kvmgt: Check the pfn got from vfio_pin_pages")
Causing kvmgt part to no longer build. Let's remove it.
Reported-by: Tomasz Lis <tomasz.lis@intel.com>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180712155330.32055-1-michal.winiarski@intel.com
Rodrigo Vivi [Mon, 23 Jul 2018 16:13:12 +0000 (09:13 -0700)]
Merge drm/drm-next into drm-intel-next-queued
We need a backmerge to get DP_DPCD_REV_14 before we push other
i915 changes to dinq that could break compilation.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Anusha Srivatsa [Fri, 20 Jul 2018 21:42:42 +0000 (14:42 -0700)]
drm/i915/dsc: Add missing _MMIO() from PPS registers
This patch fixes the commit -
<
2efbb2f099fb> ("i915/dp/dsc: Add DSC PPS register definitions"),
which did not have _MMIO() for DSCA and DSCC.
v2: Fix typos. (manasi)
v3: Change the commit message (Rodrigo)
Cc: Rodrigi Vivi <rodrigo.vivi@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1532122962-9068-1-git-send-email-anusha.srivatsa@intel.com
Rodrigo Vivi [Fri, 20 Jul 2018 00:31:55 +0000 (17:31 -0700)]
drm/i915: Fix psr sink status report.
First of all don't try to read dpcd if PSR is not even supported.
But also, if read failed return -EIO instead of reporting via a
backchannel.
v2: fix dev_priv: At this level m->private is the connector. (CI/DK)
don't convert dpcd read errors to EIO. (DK)
Fixes: 5b7b30864d1d ("drm/i915/psr: Split sink status into a separate debugfs node")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180720003155.16290-1-rodrigo.vivi@intel.com
Rodrigo Vivi [Thu, 19 Jul 2018 23:42:17 +0000 (16:42 -0700)]
drm/i915: Remove unused "ret" variable.
Just a small clean-up with no functional change, only
removing a variable that is never actually used.
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: <nathan.d.ciobanu@linux.intel.com>
Reviewed-by: Nathan Ciobanu <nathan.d.ciobanu@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180719234217.7855-1-rodrigo.vivi@intel.com
Chris Wilson [Fri, 20 Jul 2018 10:19:10 +0000 (11:19 +0100)]
drm/i915: Only force GGTT coherency w/a on required chipsets
Not all chipsets have an internal buffer delaying the visibility of
writes via the GGTT being visible by other physical paths, but we use a
very heavy workaround for all. We only need to apply that workarounds to
the chipsets we know suffer from the delay and the resulting coherency
issue.
Similarly, the same inconsistent coherency fouls up our ABI promise that
a write into a mmap_gtt is immediately visible to others. Since the HW
has made that a lie, let userspace know when that contract is broken.
(Not that userspace would want to use mmap_gtt on those chipsets for
other performance reasons...)
Testcase: igt/drv_selftest/live_coherency
Testcase: igt/gem_mmap_gtt/coherency
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100587
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180720101910.11153-1-chris@chris-wilson.co.uk
Chris Wilson [Fri, 20 Jul 2018 09:51:44 +0000 (10:51 +0100)]
drm/i915: Suppress assertion for i915_ggtt_disable_guc
Another step in the drv_module_reload fault-injection saga, is that we
try to disable the guc twice. Probably. It's a little unclear exactly
what is going on in the unload sequence that catches us out, so for the
time being suppress the assertion to get the test re-enabled.
Testcase: igt/drv_module_reload/basic-reload-inject
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Acked-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180720095144.5885-1-chris@chris-wilson.co.uk
Dave Airlie [Fri, 20 Jul 2018 04:30:18 +0000 (14:30 +1000)]
Merge branch 'drm-next-4.19' of git://people.freedesktop.org/~agd5f/linux into drm-next
More features for 4.19:
- Map processes to vmids for debugging GPUVM faults
- Raven gfxoff fixes
- Initial gfxoff support for vega12
- Use defines for interrupt sources rather than magic numbers
- DC aux fixes
- Finish DC logging TODO
- Add more DC debugfs interfaces for conformance testing
- Add CRC support for DCN
- Scheduler rework in preparation for load balancing
- Unify common smu9 code
- Clean up UVD instancing support
- ttm cleanups
- Misc fixes and cleanups
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180719194001.3488-1-alexander.deucher@amd.com
Dave Airlie [Fri, 20 Jul 2018 02:29:23 +0000 (12:29 +1000)]
Merge tag 'drm-intel-next-2018-07-19' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
On GEM side:
- GuC related fixes (Chris, Michal)
- GTT read-only pages support (Jon, Chris)
- More selftests fixes (Chris)
- More GPU reset improvements (Chris)
- Flush caches after GGTT writes (Chris)
- Handle recursive shrinker for vma->last_active allocation (Chris)
- Other execlists fixes (Chris)
On Display side:
- GLK HDMI fix (Clint)
- Rework and cleanup around HPD pin (Ville)
- Preparation work for Display Stream Compression support coming on ICL (Anusha)
- Nuke LVDS lid notification (Ville)
- Assume eDP is always connected (Ville)
- Kill intel panel detection (Ville)
Signed-off-by: Dave Airlie <airlied@redhat.com>
# gpg: Signature made Fri 20 Jul 2018 01:51:45 AM AEST
# gpg: using RSA key
FA625F640EEB13CA
# gpg: Good signature from "Rodrigo Vivi <rodrigo.vivi@intel.com>"
# gpg: aka "Rodrigo Vivi <rodrigo.vivi@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6D20 7068 EEDD 6509 1C2C E2A3 FA62 5F64 0EEB 13CA
# Conflicts:
# drivers/gpu/drm/i915/intel_lrc.c
Link: https://patchwork.freedesktop.org/patch/msgid/20180719171257.GA12199@intel.com
Dave Airlie [Fri, 20 Jul 2018 00:40:25 +0000 (10:40 +1000)]
Merge tag 'drm-misc-next-2018-07-18' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 4.19:
Core Changes:
- add support for DisplayPort CEC-Tunneling-over-AUX (Hans Verkuil)
- more doc updates (Daniel Vetter)
- fourcc: Add is_yuv field to drm_format_info (Ayan Kumar Halder)
- dma-buf: correctly place BUG_ON (Michel Dänzer)
Driver Changes:
- more vkms support(Rodrigo Siqueira)
- many fixes and small improments to all drivers
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180718200826.GA20165@juma
Dave Airlie [Fri, 20 Jul 2018 00:34:24 +0000 (10:34 +1000)]
Merge branch 'linux-4.19' of git://github.com/skeggsb/linux into drm-next
misc fixes and cleanups for next.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CACAvsv55CfRonQ0bo2XiitkCiWTjKwhsP=+ZFhoa-BaJ72Ryew@mail.gmail.com
Paulo Zanoni [Wed, 11 Jul 2018 21:59:02 +0000 (14:59 -0700)]
drm/i915/icl: compute the TBT PLL registers
Use the hardcoded tables provided by our spec.
v2:
- SSC stays disabled.
- Use intel_port_is_tc().
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180711215909.23945-2-paulo.r.zanoni@intel.com
Azhar Shaikh [Fri, 6 Jul 2018 18:37:30 +0000 (11:37 -0700)]
drm/i915: Fix assert_plane() warning on bootup with external display
On KBL, WHL RVPs, booting up with an external display connected, triggers
below warning, when the BiOS brings up the external display too.
This warning is not seen during hotplug.
[ 3.615226] ------------[ cut here ]------------
[ 3.619829] plane 1A assertion failure (expected on, current off)
[ 3.632039] WARNING: CPU: 2 PID: 354 at drivers/gpu/drm/i915/intel_display.c:1294 assert_plane+0x71/0xbb
[ 3.633920] iwlwifi 0000:00:14.3: loaded firmware version 38.
c0e03d94.0 op_mode iwlmvm
[ 3.647157] Modules linked in: iwlwifi cfg80211 btusb btrtl btbcm btintel bluetooth ecdh_generic
[ 3.647163] CPU: 2 PID: 354 Comm: frecon Not tainted
4.17.0-rc7-50176-g655af12d39c2 #3
[ 3.647165] Hardware name: Intel Corporation CoffeeLake Client Platform/WhiskeyLake U DDR4 ERB, BIOS CNLSFWR1.R00.X140.B00.
1804040304 04/04/2018
[ 3.684509] RIP: 0010:assert_plane+0x71/0xbb
[ 3.764451] Call Trace:
[ 3.766888] intel_atomic_commit_tail+0xa97/0xb77
[ 3.771569] intel_atomic_commit+0x26a/0x279
[ 3.771572] drm_atomic_helper_set_config+0x5c/0x76
[ 3.780670] __drm_mode_set_config_internal+0x66/0x109
[ 3.780672] drm_mode_setcrtc+0x4c9/0x5cc
[ 3.780674] ? drm_mode_getcrtc+0x162/0x162
[ 3.789774] ? drm_mode_getcrtc+0x162/0x162
[ 3.798108] drm_ioctl_kernel+0x8d/0xe4
[ 3.801926] drm_ioctl+0x27d/0x368
[ 3.805311] ? drm_mode_getcrtc+0x162/0x162
[ 3.805314] ? selinux_file_ioctl+0x14e/0x199
[ 3.805317] vfs_ioctl+0x21/0x2f
[ 3.813812] do_vfs_ioctl+0x491/0x4b4
[ 3.813813] ? security_file_ioctl+0x37/0x4b
[ 3.813816] ksys_ioctl+0x55/0x75
[ 3.820672] __x64_sys_ioctl+0x1a/0x1e
[ 3.820674] do_syscall_64+0x51/0x5f
[ 3.820678] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 3.828221] RIP: 0033:0x7b5e04953967
[ 3.835504] RSP: 002b:
00007fff2eafb6f8 EFLAGS:
00000246 ORIG_RAX:
0000000000000010
[ 3.835505] RAX:
ffffffffffffffda RBX:
0000000000000002 RCX:
00007b5e04953967
[ 3.835505] RDX:
00007fff2eafb730 RSI:
00000000c06864a2 RDI:
000000000000000f
[ 3.835506] RBP:
00007fff2eafb720 R08:
0000000000000000 R09:
0000000000000000
[ 3.835507] R10:
0000000000000070 R11:
0000000000000246 R12:
000000000000000f
[ 3.879988] R13:
000056bc9dd7d210 R14:
00007fff2eafb730 R15:
00000000c06864a2
[ 3.887081] Code: 48 c7 c7 06 71 a5 be 84 c0 48 c7 c2 06 fd a3 be 48 89 f9 48 0f 44 ca 84 db 48 0f 45 d7 48 c7 c7 df d3 a4 be 31 c0 e8 af a0 c0 ff <0f> 0b eb 2b 48 c7 c7 06 fd a3 be 84 c0 48 c7 c2 06 71 a5 be 48
[ 3.905845] WARNING: CPU: 2 PID: 354 at drivers/gpu/drm/i915/intel_display.c:1294 assert_plane+0x71/0xbb
[ 3.920964] ---[ end trace
dac692f4ac46391a ]---
The warning is seen when mode_setcrtc() is called for pipeB
during bootup and before we get a mode_setcrtc() for pipeA,
while doing update_crtcs() in intel_atomic_commit_tail().
Now since, plane1A is still active after commit, update_crtcs()
is done for pipeA and eventually update_plane() for plane1A.
intel_plane_state->ctl for plane1A is not updated since set_modecrtc() is
called for pipeB. So intel_plane_state->ctl for plane 1A will be 0x0.
So doing an update_plane() for plane1A, will result in clearing
PLANE_CTL_ENABLE bit, and hence the warning.
To fix this warning, force all active planes to recompute their states
in probe.
Changes in v8:
- Actually add Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Changes in v7:
- Move call to intel_initial_commit() after sanitize_watermarks()
Otherwise the plane update will still consult potentially bogus
watermarks we read out from the hardware. (Ville)
- Carry Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
from v6
Changes in v6:
- Handle EDEADLK for drm_atomic_get_crtc_state() and
drm_atomic_add_affected_planes()
- Remove optimization of calling intel_initial_commit()
only when there is more than one active pipe in probe.
- Avoid using intel_ types.
Changes in v5:
- Drop drm_modeset_lock_all_ctx() since locks will be taken later.
Changes in v4:
- Handle locking in intel_initial_commit()
- Move the for loop inside intel_initial_commit() so that
drm_atomic_commit() is called only once
- Call intel_initial_commit() only for more than one active crtc on boot.
- Save the return value of intel_initial_commit() and print a message in
case of an error
Changes in v3:
- Add comments
Changes in v2:
- Force all planes to recompute their states.(Ville Syrjälä)
- Update the commit message
Signed-off-by: Azhar Shaikh <azhar.shaikh@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1530902250-44583-1-git-send-email-azhar.shaikh@intel.com
Christian König [Wed, 18 Jul 2018 18:30:51 +0000 (20:30 +0200)]
drm/amdgpu: clean up UVD instance handling v2
The whole handle, filp and entity handling is superfluous here.
We should have reviewed that more thoughtfully. It looks like somebody
just made the code instance aware without knowing the background.
v2: fix one more missed case in amdgpu_uvd_suspend
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 18 Jul 2018 18:28:08 +0000 (20:28 +0200)]
drm/amdgpu: remove superflous UVD encode entity
Not sure what that was every used for, but now it is completely unused.
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Michel Dänzer [Tue, 17 Jul 2018 10:37:45 +0000 (12:37 +0200)]
drm/amdgpu/display: Replace CONFIG_DRM_AMD_DC_DCN1_0 with CONFIG_X86
Allowing CONFIG_DRM_AMD_DC_DCN1_0 to be disabled on X86 was an
opportunity for display with Raven Ridge accidentally not working.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Thu, 19 Jul 2018 05:21:43 +0000 (13:21 +0800)]
drm/amd/powerplay: fixed uninitialized value
The 'result' is not initialized correctly. It causes the API
return an error code even on success.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Alex Deucher [Wed, 18 Jul 2018 21:07:11 +0000 (16:07 -0500)]
drm/amdgpu/powerplay: use irq source defines for smu7 sources
Use the newly added irq source defines rather than magic numbers
for smu7 thermal interrupts.
Rewiewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Rex Zhu <rezhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Chris Wilson [Tue, 17 Jul 2018 09:57:51 +0000 (10:57 +0100)]
drm/i915/gtt: Full ppgtt everywhere, no excuses
We believe we have all the kinks worked out, even for the early
Valleyview devices, for whom we currently disable all ppgtt.
References:
62942ed7279d ("drm/i915/vlv: disable PPGTT on early revs v3")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180717095751.1034-2-chris@chris-wilson.co.uk
Chris Wilson [Tue, 17 Jul 2018 09:57:50 +0000 (10:57 +0100)]
drm/i915/gtt: Enable full-ppgtt by default everywhere
We should we have all the kinks worked out and full-ppgtt now works
reliably on gen7 (Ivybridge, Valleyview/Baytrail and Haswell). If we can
let userspace have full control over their own ppgtt, it makes softpinning
far more effective, in turn making GPU dispatch far more efficient by
virtue of better mm segregation. On the other hand, switching over to a
different GTT for every client does incur noticeable overhead, but only
for very lightweight tasks.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jason Ekstrand <jason.ekstrand@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180717095751.1034-1-chris@chris-wilson.co.uk
Rodrigo Vivi [Thu, 19 Jul 2018 15:47:59 +0000 (08:47 -0700)]
drm/i915: Update DRIVER_DATE to
20180719
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Ville Syrjälä [Tue, 17 Jul 2018 17:42:16 +0000 (20:42 +0300)]
drm/i915: Remove intel_panel_detect()
With neither LVDS or eDP no longer using intel_panel_detect() we can
kill it, and the accompanying modparam.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180717174216.22252-3-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Ville Syrjälä [Tue, 17 Jul 2018 17:42:15 +0000 (20:42 +0300)]
drm/i915: Assume eDP is always connected
We never registered any kind of lid notifier for eDP, so looking at the
lid status is pretty much bonkers. Let's just consider eDP always
connected instead.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180717174216.22252-2-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Ville Syrjälä [Tue, 17 Jul 2018 17:42:14 +0000 (20:42 +0300)]
drm/i915: Nuke the LVDS lid notifier
We broke the LVDS notifier resume thing in (presumably) commit
e2c8b8701e2d ("drm/i915: Use atomic helpers for suspend, v2.") as
we no longer duplicate the current state in the LVDS notifier and
thus we never resume it properly either.
Instead of trying to fix it again let's just kill off the lid
notifier entirely. None of the machines tested thus far have
apparently needed it. Originally the lid notifier was added to
work around cases where the VBIOS was clobbering some of the
hardware state behind the driver's back, mostly on Thinkpads.
We now have a few report of Thinkpads working just fine without
the notifier. So maybe it was misdiagnosed originally, or
something else has changed (ACPI video stuff perhaps?).
If we do end up finding a machine where the VBIOS is still causing
problems I would suggest that we first try setting various bits in
the VBIOS scratch registers. There are several to choose from that
may instruct the VBIOS to steer clear.
With the notifier gone we'll also stop looking at the panel status
in ->detect().
v2: Nuke enum modeset_restore (Rodrigo)
Cc: stable@vger.kernel.org
Cc: Wolfgang Draxinger <wdraxinger.maillist@draxit.de>
Cc: Vito Caputo <vcaputo@pengaru.com>
Cc: kitsunyan <kitsunyan@airmail.cc>
Cc: Joonas Saarinen <jza@saunalahti.fi>
Tested-by: Vito Caputo <vcaputo@pengaru.com> # Thinkapd X61s
Tested-by: kitsunyan <kitsunyan@airmail.cc> # ThinkPad X200
Tested-by: Joonas Saarinen <jza@saunalahti.fi> # Fujitsu Siemens U9210
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105902
References: https://lists.freedesktop.org/archives/intel-gfx/2018-June/169315.html
References: https://bugs.freedesktop.org/show_bug.cgi?id=21230
Fixes: e2c8b8701e2d ("drm/i915: Use atomic helpers for suspend, v2.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180717174216.22252-1-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Chris Wilson [Thu, 19 Jul 2018 07:50:29 +0000 (08:50 +0100)]
drm/i915/execlists: Move the assertion we have the rpm wakeref down
There's a race between idling the engine and finishing off the last
tasklet (as we may kick the tasklets after declaring an individual
engine idle). However, since we do not need to access the device until
we try to submit to the ELSP register (processing the CSB just requires
normal CPU access to the HWSP, and when idle we should not need to
submit!) we can defer the assertion unto that point. The assertion is
still useful as it does verify that we do hold the longterm GT wakeref
taken from request allocation until request completion.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107274
Fixes: 9512f985c32d ("drm/i915/execlists: Direct submission of new requests (avoid tasklet/ksoftirqd)")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180719075029.28643-1-chris@chris-wilson.co.uk
Chris Wilson [Thu, 19 Jul 2018 07:22:06 +0000 (08:22 +0100)]
drm/i915: Handle recursive shrinker for vma->last_active allocation
If we call into the shrinker for direct relcaim inside kmalloc, it will
retire the requests. If we retire the vma->last_active while processing a
new i915_vma_move_to_active() we can upset the delicate bookkeeping
required for the cache. After the possible invocation of the shrinker, we
need to double check the vma->last_active is still valid.
Fixes: 8b293eb53a7d ("drm/i915: Track the last-active inside the i915_vma")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105600#c39
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180719072206.16015-1-chris@chris-wilson.co.uk
Chris Wilson [Tue, 17 Jul 2018 20:29:32 +0000 (21:29 +0100)]
drm/i915/guc: Keep guc submission permanently engaged
We make a decision at module load whether to use the GuC backend or not,
but lose that setup across set-wedge. Currently, the guc doesn't
override the engine->set_default_submission hook letting execlists sneak
back in temporarily on unwedging leading to an unbalanced park/unpark.
v2: Remove comment about switching back temporarily to execlists on
guc_submission_disable(). We currently only call disable on shutdown,
and plan to also call disable before suspend and reset, in which case we
will either restore guc submission or mark the driver as wedged, making
the reset back to execlists pointless.
v3: Move reset.prepare across
Fixes: 63572937cebf ("drm/i915/execlists: Flush pending preemption events during reset")
Testcase: igt/drv_module_reload/basic-reload-inject
Testcase: igt/gem_eio
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180717202932.1423-1-chris@chris-wilson.co.uk
Ben Skeggs [Tue, 17 Jul 2018 23:33:39 +0000 (09:33 +1000)]
drm/nouveau/kms/nv50-: allocate push buffers in vidmem on pascal
Workaround for issues seen on systems with large amounts of RAM, caused
by display not supporting the same physical address limits as the other
parts of the GPU.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Anusha Srivatsa [Tue, 17 Jul 2018 21:11:01 +0000 (14:11 -0700)]
i915/dp/dsc: Add Rate Control Range Parameter Registers
RC model has these parameters that correspond with each of
15 ranges of RC buffer threshold value in the RC model.
The three elements are range_min_qp, range_max_qp and
range_bpg_offset.
Add the Rate Control range values for eDP/MIPI and DP case.
The actual values are calculated usung a helper function.
This patch adds the shifts to registers where the value will
be written during atomic commit.
v2:
- Use _MMIO_PIPE() instead of _MMIO(_PICK()) (Manasi)
- Combine shifts (Manasi)
Cc: Jose Souza <jose.souza@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1531861861-10950-4-git-send-email-anusha.srivatsa@intel.com
Anusha Srivatsa [Tue, 17 Jul 2018 21:11:00 +0000 (14:11 -0700)]
i915/dp/dsc: Add Rate Control Buffer Threshold Registers
Add register defines and shifts that control the RC buffer threshold
between encoder and decoder for eDP/MIPI and DP cases.
The actual values are calculated usung a helper function.
This patch adds the shifts to registers where the value will
be written during atomic commit.
v2:
- Use _MMIO_PIPE() instead of _MMIO_(_PICK()) (Manasi)
- Combine shifts (Manasi)
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1531861861-10950-3-git-send-email-anusha.srivatsa@intel.com
Anusha Srivatsa [Tue, 17 Jul 2018 21:10:59 +0000 (14:10 -0700)]
i915/dp/dsc: Add DSC PPS register definitions
Display Stream Compression(DSC) has a set of Picture
Parameter Set(PPS) components that the encoder must
communicate to the decoder.
This patch adds register definitions to
the PPS parameters for eDP/MIPI case and Display Port.
v2:
- Use _MMIO_PIPE instead of _MMIO(_PICK()). (Manasi)
- Use DSC constants as arguments. (Manasi)
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1531861861-10950-2-git-send-email-anusha.srivatsa@intel.com
Anusha Srivatsa [Tue, 17 Jul 2018 21:10:58 +0000 (14:10 -0700)]
drm/i915/icl: Add VIDEO_DIP registers
The Picture Parameter Set metadata for DSC has to be sent
to the panel through secondary data packets. Add the error
correction registers, data registers and control registers
for the same.
The control registers for transcoders A and B are already
defined and will be reused for Icelake purpose. This patch adds
Control register for EDP and transcoder C apart from adding the
PPS data and error registers.
v2: reuse MMIO_TRANS2 for _PPS_DATA and _PPS_ECC.
The _MMIO_TRANS2(pipe, reg) macro definition takes care of the eDp case
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1531861861-10950-1-git-send-email-anusha.srivatsa@intel.com
Kees Cook [Wed, 20 Jun 2018 18:26:47 +0000 (11:26 -0700)]
drm/amdgpu/pm: Remove VLA usage
In the quest to remove all stack VLA usage from the kernel[1], this
uses the maximum sane buffer size and removes copy/paste code.
[1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com
Reviewed-by: Rex Zhu <rezhu@amd.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Huang Rui [Wed, 4 Jul 2018 10:08:54 +0000 (18:08 +0800)]
drm/amdgpu: simplify the bo reference on amdgpu_bo_update
BO ptr already be initialized at definition, we needn't use the complicated
reference.
v2: fix typo at subject line
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sonny Jiang [Tue, 17 Jul 2018 19:27:20 +0000 (15:27 -0400)]
drm/amdgpu: remove internal/unused kernel module parameters
Remove internal/unused kernel module parameters
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Mon, 16 Jul 2018 12:58:48 +0000 (14:58 +0200)]
drm/amdgpu: change ring priority after pushing the job (v2)
Pushing a job can change the ring assignment of an entity.
v2: squash in:
"drm/amdgpu: fix job priority handling" (Christian)
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Mon, 16 Jul 2018 11:47:34 +0000 (13:47 +0200)]
drm/amdgpu: allow for more flexible priority handling
Allow to call amdgpu_ring_priority_get() after pushing the ring to the
scheduler.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Feifei Xu [Tue, 17 Jul 2018 06:54:23 +0000 (14:54 +0800)]
drm/amdgpu/gfx9: Update golden settings for vg10.
Add some UTCL registers' golden settings.
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Tested-by: Kevin Wang <Kevin1.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rodrigo Vivi [Thu, 5 Jul 2018 19:25:28 +0000 (12:25 -0700)]
drm/i915: Kill sink_crc for good
It was originally introduced following the VESA spec in order to validate PSR.
However we found so many issues around sink_crc that instead of helping PSR
development it only brought another layer of trouble to the table.
So, sink_crc has been a black whole for us in question of time, effort and hope.
First of the problems is that HW statement is clear: "Do not attempt to use
aux communication with PSR enabled". So the main reason behind sink_crc is
already compromised.
For a while we had hope on the aux-mutex could workaround this problem on SKL+
platforms, but that mutex was not reliable, not tested,
and we shouldn't use according to HW engineers.
Also, nor source, nor sink designed and implemented the sink_crc to be used like
we are trying to use here.
Well, the sink side of things is also apparently not prepared for this
case. Each panel that we tried seemed to have a different behavior with same
code and same source.
So, for all the time we lost on trying to ducktape all these different issues
I believe it is now time to move PSR to a more reliable validation.
Maybe not a perfect one as we dreamed for this sink_crc, but at least more
reliable.
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180705192528.30515-1-rodrigo.vivi@intel.com
Dave Airlie [Wed, 18 Jul 2018 19:46:24 +0000 (05:46 +1000)]
Merge tag 'drm-intel-next-2018-07-09' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
Higlights here goes to many PSR fixes and improvements; to the Ice lake work with
power well support and begin of DSI support addition. Also there were many improvements
on execlists and interrupts for minimal latency on command submission; and many fixes
on selftests, mostly caught by our CI.
General driver:
- Clean-up on aux irq (Lucas)
- Mark expected switch fall-through for dealing with static analysis tools (Gustavo)
Gem:
- Different fixes for GuC (Chris, Anusha, Michal)
- Avoid self-relocation BIAS if no relocation (Chris)
- Improve debugging cases in on EINVAL return and vma allocation (Chris)
- Fixes and improvements on context destroying and freeing (Chris)
- Wait for engines to idle before retiring (Chris)
- Many improvements on execlists and interrupts for minimal latency on command submission (Chris)
- Many fixes in selftests, specially on cases highlighted on CI (Chris)
- Other fixes and improvements around GGTT (Chris)
- Prevent background reaping of active objects (Chris)
Display:
- Parallel modeset cleanup to fix driver reset (Chris)
- Get AUX power domain for DP main link (Imre)
- Clean-up on PSR unused func pointers (Rodrigo)
- Many PSR/PSR2 fixes and improvements (DK, Jose, Tarun)
- Add a PSR1 live status (Vathsala)
- Replace old drm_*_{un/reference} with put,get functions (Thomas)
- FBC fixes (Maarten)
- Abstract and document the usage of picking macros (Jani)
- Remove unnecessary check for unsupported modifiers for NV12. (DK)
- Interrupt fixes for display (Ville)
- Clean up on sdvo code (Ville)
- Clean up on current DSI code (Jani)
- Remove support for legacy debugfs crc interface (Maarten)
- Simplify get_encoder_power_domains (Imre)
Icelake:
- MG PLL fixes (Imre)
- Add hw workaround for alpha blending (Vandita)
- Add power well support (Imre)
- Add Interrupt Support (Anusha)
- Start to add support for DSI on Ice Lake (Madhav)
Signed-off-by: Dave Airlie <airlied@redhat.com>
# gpg: Signature made Tue 10 Jul 2018 08:41:37 AM AEST
# gpg: using RSA key
FA625F640EEB13CA
# gpg: Good signature from "Rodrigo Vivi <rodrigo.vivi@intel.com>"
# gpg: aka "Rodrigo Vivi <rodrigo.vivi@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6D20 7068 EEDD 6509 1C2C E2A3 FA62 5F64 0EEB 13CA
Link: https://patchwork.freedesktop.org/patch/msgid/20180710234349.GA16562@intel.com
Dave Airlie [Wed, 18 Jul 2018 19:33:44 +0000 (05:33 +1000)]
Merge branch 'mediatek-drm-next-4.19' of https://github.com/ckhu-mediatek/linux.git-tags into drm-next
This include MT2712 SoC support and removing struct mtk_drm_fb.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1531204482.14433.6.camel@mtksdaap41
Dave Airlie [Wed, 18 Jul 2018 19:13:14 +0000 (05:13 +1000)]
Merge tag 'drm-misc-next-2018-07-11' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 4.19:
Cross-subsystem Changes:
- many dt-bindings Doc changes
Core Changes:
- Encoder clean ups (Ville Syrjälä)
- Connector Writeback improvements(Boris Brezillon)
- Fake vblank support (Boris Brezillon)
- API for in-kernel clients (Noralf Trønnes)
- improvements to the path of finding panels(Boris Brezillon)
Driver Changes:
- initial support for the virtual display driver - vkms(Haneen Mohammed and Rodrigo Siqueira)
- panel: add Rocktech RK070ER9427 LCD support (Jagan Teki)
- panel: add support for the EDT ETM0700G0EDH6 and EDT ETM0700G0BDH6(Jan Tuerk)
- panel: add DLC DLC0700YZG-1 (Philipp Zabel)
- panel: add support for BOE HV070WSA-100 (Andrzej Hajda)
- panel: add newhaven, nhd-4.3-
480272ef-atxl LCD (Tomi Valkeinen)
- panel: add support for Innolux G070Y2-L01 (Christoph Fritz)
- panel: add support for DataImage SCF0700C48GGU18 (Michal Vokáč)
- panel: add support for Sharp LQ035Q7DB03 (Vladimir Zapolskiy)
- panel: p079zca: Refactor panel driver to support multiple panels (Lin Huang)
- sun4i: Add R40 display engine compatible(Jernej Skrabec)
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180712011137.GA26620@juma
Ayan Kumar Halder [Tue, 17 Jul 2018 17:13:46 +0000 (18:13 +0100)]
drm/sun4i: Substitute sun4i_backend_format_is_yuv() with format->is_yuv
drm_format_info table has a field 'is_yuv' to denote if the format
is yuv or not. The driver is expected to use this instead of
having a function for the same purpose.
Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com>
Reviewed-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1531847626-22248-5-git-send-email-ayan.halder@arm.com
Ayan Kumar Halder [Tue, 17 Jul 2018 17:13:44 +0000 (18:13 +0100)]
drm/rockchip: Substitute is_yuv_support() with format->is_yuv
drm_format_info table has a field 'is_yuv' to denote if the format
is yuv or not. The driver is expected to use this instead of
having a function for the same purpose.
Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com>
Reviewed-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1531847626-22248-3-git-send-email-ayan.halder@arm.com
Ayan Kumar Halder [Tue, 17 Jul 2018 17:13:43 +0000 (18:13 +0100)]
drm/i915: Substitute intel_format_is_yuv() with format->is_yuv
drm_format_info table has a field 'is_yuv' to denote if the format
is yuv or not. The driver is expected to use this instead of
having a function for the same purpose.
Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com>
Reviewed-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1531847626-22248-2-git-send-email-ayan.halder@arm.com
Ayan Kumar Halder [Tue, 17 Jul 2018 17:13:42 +0000 (18:13 +0100)]
drm/fourcc: Add is_yuv field to drm_format_info to denote if the format is yuv
A lot of drivers duplicate the function to check if a format is yuv or not.
If we add a field (to denote whether the format is yuv or not) in the
drm_format_info table, all the drivers can use this field and it will
prevent duplication of similar logic.
Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com>
Reviewed-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1531847626-22248-1-git-send-email-ayan.halder@arm.com
Chris Wilson [Tue, 17 Jul 2018 08:41:21 +0000 (09:41 +0100)]
drm/i915: Always retire residual requests before suspend
If the driver is wedged, we skip idling the GPU. However, we may still
have a few requests still not retired following the wedging (since they
will be waiting for a background worker trying to acquire struct_mutex).
As we hold the struct_mutex, always do a quick request retirement in
order to flush the wedged path.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107257
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180717084121.28185-1-chris@chris-wilson.co.uk
Christian König [Fri, 13 Jul 2018 12:01:08 +0000 (14:01 +0200)]
drm/amdgpu: minor cleanup in amdgpu_job.c
Remove superflous NULL check, fix coding style a bit, shorten error
messages.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Fri, 13 Jul 2018 15:15:54 +0000 (17:15 +0200)]
drm/amdgpu: remove job->adev (v2)
We can get that from the ring.
v2: squash in "drm/amdgpu: always initialize job->base.sched" (Alex)
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Gustavo A. R. Silva [Wed, 4 Jul 2018 14:22:55 +0000 (09:22 -0500)]
drm/pl111: Use 64-bit arithmetic instead of 32-bit
Add suffix ULL to constant 1000 in order to give the compiler complete
information about the proper arithmetic to use.
Notice that such constant is used in a context that expects an
expression of type u64 (64 bits, unsigned) and the following
expression is currently being evaluated using 32-bit arithmetic:
mode->clock * 1000
Addresses-Coverity-ID:
1466139 ("Unintentional integer overflow")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180704142255.GA8614@embeddedor.com
Thomas Zimmermann [Tue, 17 Jul 2018 08:36:57 +0000 (10:36 +0200)]
drm/pl111: Replace drm_dev_unref with drm_dev_put
This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180717083657.16262-1-tzimmermann@suse.de
Thomas Zimmermann [Tue, 17 Jul 2018 08:54:28 +0000 (10:54 +0200)]
drm/vc4: Replace drm_dev_unref with drm_dev_put
This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180717085428.18500-1-tzimmermann@suse.de
Chris Wilson [Tue, 17 Jul 2018 09:26:55 +0000 (10:26 +0100)]
drm/i915: Flush chipset caches after GGTT writes
Our I915g (early gen3, the oldest machine we have in the farm) is still
reporting occasional incoherency performing the following operations:
1) write through GGTT (indirect write into memory)
2) write through either CPU or WC (direct write into memory)
3) read from GGTT (indirect read)
Instead of reporting the value from (2), the read from GGTT reports the
earlier value written via the GGTT. We have made sure that the writes are
flushed from the CPU (commit
3a32497f0dbe ("drm/i915/selftests: Provide
full mb() around clflush") and commit
add00e6d896f ("drm/i915: Flush the
WCB following a WC write")), but still see the error, just less
frequently. The only remaining cache that might be affected here is a
chipset cache, so flush that as well.
Testcase: igt/drv_selftest/live_coherency #gdg
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180717092655.28417-1-chris@chris-wilson.co.uk
Paul Kocialkowski [Tue, 17 Jul 2018 12:25:22 +0000 (14:25 +0200)]
drm/sun4i: sun8i: Avoid clearing blending order at each atomic commit
Blending order is set based on the z position of each DRM plane. The
blending order register is currently cleared at each atomic DRM commit,
with the intent that each committed plane will set the appropriate
bits (based on its z-pos) when enabling the plane.
However, it sometimes happens that a particular plane is left unchanged
by an atomic commit and thus will not be configured again. In that
scenario, blending order is cleared and only the bits relevant for the
planes affected by the commit are set. This leaves the planes that did
not change without their blending order set in the register, leading
to that plane not being displayed.
Instead of clearing the blending order register at every atomic commit,
this change moves the register's initial clear at bind time and only
clears the bits for a specific plane when disabling it or changing its
zpos.
This way, planes that are left untouched by a DRM atomic commit are
no longer disabled.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180717122522.11327-1-paul.kocialkowski@bootlin.com
Thomas Zimmermann [Tue, 17 Jul 2018 08:48:14 +0000 (10:48 +0200)]
drm/sun4i: Replace drm_dev_unref with drm_dev_put
This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180717084814.18091-1-tzimmermann@suse.de
Chris Wilson [Tue, 17 Jul 2018 08:23:34 +0000 (09:23 +0100)]
drm/i915/selftests: Free the backing store between iterations
In the huge pages tests, we may have lots of objects being trapped on
the freelist as we hold the struct_mutex allowing the free worker no
opportunity to recover the backing store. We also have stricter
requirements and the desire for large contiguous pages, further
increasing the allocation pressure. To reduce the chance of running out
of memory, we could either drop the mutex and flush the free worker, or
we could release the backing store directly. We do the latter in this
patch for simplicity.
References: https://bugs.freedesktop.org/show_bug.cgi?id=107254
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180717082334.18774-1-chris@chris-wilson.co.uk
Christian König [Fri, 13 Jul 2018 14:29:10 +0000 (16:29 +0200)]
drm/amdgpu: add amdgpu_job_submit_direct helper
Make sure that we properly initialize at least the sched member.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Fri, 13 Jul 2018 13:08:44 +0000 (15:08 +0200)]
drm/amdgpu: remove job->ring
We can easily get that from the scheduler.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Fri, 13 Jul 2018 11:54:56 +0000 (13:54 +0200)]
drm/amdgpu: remove ring parameter from amdgpu_job_submit
We know the ring through the entity anyway.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Fri, 13 Jul 2018 07:58:49 +0000 (09:58 +0200)]
drm/amdgpu: remove fence context from the job
Can be obtained directly from the fence as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Fri, 13 Jul 2018 07:50:08 +0000 (09:50 +0200)]
drm/amdgpu: cleanup job header
Move job related defines, structure and function declarations to
amdgpu_job.h
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Fri, 6 Jul 2018 17:40:33 +0000 (13:40 -0400)]
drm/amd/display: Fix some checkpatch.pl errors and warnings in dc_link_dp.c
[Why]
Any Linux kernel code should pass checkpatch.pl with no errors and
little, if any, warning.
[How]
Fixing some spacing errors and warnings.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Krunoslav Kovac [Tue, 10 Jul 2018 20:04:05 +0000 (16:04 -0400)]
drm/amd/display: Null ptr check for set_sdr_white_level
[Why&How]
Cursor boosting can only be done on DCN+
Check for nullptr since DCE doesn't implement it.
Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Reviewed-by: Sivapiriyan Kumarasamy <Sivapiriyan.Kumarasamy@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Mon, 9 Jul 2018 21:25:15 +0000 (17:25 -0400)]
drm/amd/display: dal 3.1.56
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Steven Chiu <Steven.Chiu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jun Lei [Fri, 22 Jun 2018 20:51:47 +0000 (16:51 -0400)]
drm/amd/display: add new dc debug structure to track debug data
[why]
Some DTN tests still failing @ 2% Need to reduce.
[how]
add instrumentation code to driver so we can get more information from failed runs.
Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tony Cheng [Sat, 7 Jul 2018 19:43:07 +0000 (15:43 -0400)]
drm/amd/display: Move address tracking out of HUBP
[Why]
We sometime require remapping of FB address space to UMA
[How]
Move address tracking up a layer before we apply address translation
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nikola Cornij [Wed, 4 Jul 2018 23:05:16 +0000 (19:05 -0400)]
drm/amd/display: Add hook for MST root branch info
This allows DM to do any necessary updates before MST discovery starts.
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Gloria Li [Tue, 3 Jul 2018 18:39:22 +0000 (14:39 -0400)]
drm/amd/display: add HDR visual confirm
[Why]
Testing team wants a way to tell if HDR is on or not
[How]
Program the overscan color to visually indicate the HDR state of the top-most plane
Signed-off-by: Gloria Li <geling.li@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Krunoslav Kovac [Wed, 27 Jun 2018 22:23:37 +0000 (18:23 -0400)]
drm/amd/display: Refactor SDR cursor boosting in HDR mode
[Why]
Cursor boosting is done via CNVC_CUR register which is DPP, not HUBP
Previous commit was implementing it in HUBP functions,
and also breaking diags tests.
[How]
1. Undo original commit as well as Eric's diags test fix, almost completely
2. Move programming to DPP and call via new dc_stream function
3. Also removing cur_rom_en from dpp_cursor_attributes and programming
as part of normal cursor attributes as it depends on cursor color format
Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Vitaly Prosyak [Fri, 15 Jun 2018 13:34:10 +0000 (08:34 -0500)]
drm/amd/display: Add headers for hardcoded 1d luts.
Hard-coded luts are needed since complex algorithms are used for
color and tone mapping. Add the headers for future use.
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Junwei Zhang [Mon, 16 Jul 2018 02:53:43 +0000 (10:53 +0800)]
drm/scheduler: add NULL pointer check for run queue (v2)
To check rq pointer before adding entity into it.
That avoids NULL pointer access in some case.
v2: move the check to caller
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Andrey Grodzovsky [Fri, 6 Jul 2018 18:16:54 +0000 (14:16 -0400)]
drm/amdgpu: Allow to create BO lists in CS ioctl v3
This change is to support MESA performace optimization.
Modify CS IOCTL to allow its input as command buffer and an array of
buffer handles to create a temporay bo list and then destroy it
when IOCTL completes.
This saves on calling for BO_LIST create and destry IOCTLs in MESA
and by this improves performance.
v2: Avoid inserting the temp list into idr struct.
v3:
Remove idr alloation from amdgpu_bo_list_create.
Remove useless argument from amdgpu_cs_parser_fini
Minor cosmetic stuff.
v4: Revert amdgpu_bo_list_destroy back to static
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Huang [Fri, 13 Jul 2018 19:05:10 +0000 (15:05 -0400)]
Revert "drm/amd/powerplay: fix performance drop on Vega10"
This reverts commit
b87079ec7b4d38efee015367315958ce5495ba93.
SMU FW team ask to remove this version specific code.
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Chris Wilson [Mon, 16 Jul 2018 13:40:09 +0000 (14:40 +0100)]
drm/i915/selftests: Exercise reset to break stuck GTT eviction
We must be able to reset the GPU while we are waiting on it to perform
an eviction (unbinding an active vma). So attach a spinning request to a
target vma and try and it evict it from a thread to see if that blocks
indefinitely.
v2: Add a wait for the thread to start just in case that takes more than
10ms...
v3: complete() not completion_done() to signal the completion.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180716134009.13143-1-chris@chris-wilson.co.uk
Lyude Paul [Mon, 16 Jul 2018 17:17:11 +0000 (13:17 -0400)]
drm/connector: Fix typo in drm_connector_list_iter_next()
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180716171711.413-1-lyude@redhat.com
Alex Deucher [Thu, 12 Jul 2018 19:59:22 +0000 (14:59 -0500)]
drm/amdgpu/pp: switch smu callback type for get_argument()
return a uint32_t rather than an int to properly reflect
what the function does.
Reviewed-by: Rex Zhu <rezhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 12 Jul 2018 19:47:30 +0000 (14:47 -0500)]
drm/amdgpu/pp: split out common smumgr smu9 code
Split out the shared smumgr code for vega10 and 12
so we don't have duplicate code for both.
Reviewed-by: Rex Zhu <rezhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 11 Jul 2018 22:30:25 +0000 (17:30 -0500)]
drm/amdgpu/pp: remove dead vega12 code
Commented out.
Reviewed-by: Rex Zhu <rezhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Chris Wilson [Mon, 16 Jul 2018 13:21:54 +0000 (14:21 +0100)]
drm/i915/selftests: Force a preemption hang
Inject a failure into preemption completion to pretend as if the HW
didn't successfully handle preemption and we are forced to do a reset in
the middle.
v2: Wait for preemption, to force testing with the missed preemption.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180716132154.12539-1-chris@chris-wilson.co.uk
Chris Wilson [Mon, 16 Jul 2018 12:54:24 +0000 (13:54 +0100)]
drm/i915/execlists: Always clear preempt status on cancelling all
On reset/wedging, we cancel all pending replies from the HW and we also
want to cancel an outstanding preemption event. Since we use the same
function to cancel the pending replies for reset and for a preemption
event, we can simply clear the active tracking for all.
v2: Keep execlists_user_end() markup for wedging
v3: Move assignment to inline to hide the bare assignment.
Fixes: 60a943245413 ("drm/i915/execlists: Drop clear_gtiir() on GPU reset")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180716125424.5715-1-chris@chris-wilson.co.uk
Lyude Paul [Mon, 16 Jul 2018 15:44:32 +0000 (11:44 -0400)]
drm/dp_helper: Add DP aux channel tracing
This is something we've needed for a very long time now, as it makes
debugging issues with faulty MST hubs along with debugging issues
regarding us interfacing with hubs correctly vastly easier to debug.
Currently this can actually be done if you trace the i2c devices for DP
using ftrace but that's significantly less useful for a couple of
reasons:
- Tracing the i2c devices through ftrace means all of the traces are
going to contain a lot of "garbage" output that we're sending over the
i2c line. Most of this garbage comes from retrying transactions, DRM's
helper library adding extra transactions to work around bad hubs, etc.
- Having a user set up ftrace so that they can provide debugging
information is a lot more difficult then being able to say "just boot
with drm.debug=0x100"
- We can potentially expand upon this tracing in the future to print
debugging information in regards to other DP transactions like MST
sideband transactions
This is inspired by a patch Rob Clark sent to do this a long time back.
Neither of us could find the patch however, so we both assumed it would
probably just be easier to rewrite it anyway.
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180716154432.13433-1-lyude@redhat.com
Alexandru Gheorghe [Fri, 13 Jul 2018 15:10:58 +0000 (16:10 +0100)]
drm: writeback: Fix doc that says connector should be disconnected
During iteration process one of the proposed mechanism for not
breaking existing userspace was to report writeback connectors as
disconnected, however the final version used
DRM_CLIENT_CAP_WRITEBACK_CONNECTORS for that purpose.
Change-Id: I2319d099f7669094c8530f1521abdbca08e76486
Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/238399/
Michel Dänzer [Wed, 4 Jul 2018 15:14:05 +0000 (17:14 +0200)]
dma-buf: Move BUG_ON from _add_shared_fence to _add_shared_inplace
Fixes the BUG_ON spuriously triggering under the following
circumstances:
* reservation_object_reserve_shared is called with shared_count ==
shared_max - 1, so obj->staged is freed in preparation of an in-place
update.
* reservation_object_add_shared_fence is called with the first fence,
after which shared_count == shared_max.
* reservation_object_add_shared_fence is called with a follow-up fence
from the same context.
In the second reservation_object_add_shared_fence call, the BUG_ON
triggers. However, nothing bad would happen in
reservation_object_add_shared_inplace, since both fences are from the
same context, so they only occupy a single slot.
Prevent this by moving the BUG_ON to where an overflow would actually
happen (e.g. if a buggy caller didn't call
reservation_object_reserve_shared before).
v2:
* Fix description of breaking scenario (Christian König)
* Add bugzilla reference
Cc: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/106418
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> # v1
Reviewed-by: Christian König <christian.koenig@amd.com> # v1
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180704151405.10357-1-michel@daenzer.net
Chris Wilson [Mon, 16 Jul 2018 08:03:30 +0000 (09:03 +0100)]
drm/i915/execlists: Disable submission tasklet upon wedging
If we declare the driver wedged before the GPU truly is, then we may see
the GPU complete some CS events following our cancellation. This leaves
us quite confused as we deleted all the bookkeeping and thus complain
about the inconsistent state.
We can just ignore the remaining events and let the GPU idle by not
feeding it, and so avoid trying to racily overwrite shared state. We
rely on there being a full GPU reset before unwedging, giving us the
opportunity to reset the shared state.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107188
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180716080332.32283-4-chris@chris-wilson.co.uk
Chris Wilson [Mon, 16 Jul 2018 08:03:31 +0000 (09:03 +0100)]
drm/i915: Remove pci private pointer after destroying the device private
On an aborted module load, we unwind and free our device private - but
we left a dangling pointer to our privates inside the pci_device. After
the attempted aborted unload, we may still get a call to i915_pci_remove()
when the module is removed, potentially chasing stale data.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180716080332.32283-5-chris@chris-wilson.co.uk
Chris Wilson [Mon, 16 Jul 2018 08:03:32 +0000 (09:03 +0100)]
drm/i915/selftests: Downgrade igt_timeout message
Give in, since CI continues to incorrectly insist that KERN_NOTICE is a
warning and flags the timeout message as unwanted spam. At first, the
intention was to use the message to indicate which tests might warrant
an extended run, but virtually all tests require a timeout so it is
simply not as interesting as first thought.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103667
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180716080332.32283-6-chris@chris-wilson.co.uk
Neil Armstrong [Mon, 16 Jul 2018 07:40:14 +0000 (09:40 +0200)]
drm/meson: Make DMT timings parameters and pixel clock generic
Remove the modes timings tables for DMT modes and calculate the HW
paremeters from the modes timings.
Switch the DMT modes pixel clock calculation out of the static frequency
list to a generic calculation from a range of possible PLL dividers.
This patch is an intermediate step towards usage of the Common Clock
Framwework for PLL setup, by reworking the code to have common
sel_pll() function called by the CEA (HDMI) freq setup and the generic
DMT frequencies setup, we should be able to simply call clk_set_rate()
on the PLL clock handle in a near future.
The CEA (HDMI) and CVBS modes needs very specific clock paths that CCF will
never be able to determine by itself, so there is still some work to do for
a full handoff to CCF handling the clocks.
This setup permits setting non-CEA modes like :
- 1600x900-60Hz
- 1280x1024-75Hz
- 1280x1024-60Hz
- 1440x900-60Hz
- 1366x768-60Hz
- 1280x800-60Hz
- 1152x864-75Hz
- 1024x768-75Hz
- 1024x768-70Hz
- 1024x768-60Hz
- 832x624-75Hz
- 800x600-75Hz
- 800x600-72Hz
- 800x600-60Hz
- 640x480-75Hz
- 640x480-73Hz
- 640x480-67Hz
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
[narmstrong: fixed trivial checkpatch issues]
Link: https://patchwork.freedesktop.org/patch/msgid/1531726814-14638-1-git-send-email-narmstrong@baylibre.com
Thierry Reding [Wed, 30 May 2018 14:06:25 +0000 (16:06 +0200)]
drm/nouveau: tegra: Detach from ARM DMA/IOMMU mapping
Depending on the kernel configuration, early ARM architecture setup code
may have attached the GPU to a DMA/IOMMU mapping that transparently uses
the IOMMU to back the DMA API. Tegra requires special handling for IOMMU
backed buffers (a special bit in the GPU's MMU page tables indicates the
memory path to take: via the SMMU or directly to the memory controller).
Transparently backing DMA memory with an IOMMU prevents Nouveau from
properly handling such memory accesses and causes memory access faults.
As a side-note: buffers other than those allocated in instance memory
don't need to be physically contiguous from the GPU's perspective since
the GPU can map them into contiguous buffers using its own MMU. Mapping
these buffers through the IOMMU is unnecessary and will even lead to
performance degradation because of the additional translation. One
exception to this are compressible buffers which need large pages. In
order to enable these large pages, multiple small pages will have to be
combined into one large (I/O virtually contiguous) mapping via the
IOMMU. However, that is a topic outside the scope of this fix and isn't
currently supported. An implementation will want to explicitly create
these large pages in the Nouveau driver, so detaching from a DMA/IOMMU
mapping would still be required.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Thierry Reding [Wed, 30 May 2018 14:06:24 +0000 (16:06 +0200)]
ARM: dma-mapping: Set proper DMA ops in arm_iommu_detach_device()
Instead of setting the DMA ops pointer to NULL, set the correct,
non-IOMMU ops depending on the device's coherency setting.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Kees Cook [Thu, 24 May 2018 17:24:36 +0000 (10:24 -0700)]
drm/nouveau/secboot/acr: Remove VLA usage
In the quest to remove all stack VLA usage from the kernel[1], this
allocates the working buffers before starting the writing so it won't
abort in the middle. This needs an initial walk of the lists to figure
out how large the buffer should be.
[1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Thomas Zimmermann [Mon, 18 Jun 2018 12:53:12 +0000 (14:53 +0200)]
drm/nouveau: Replace drm_dev_unref with drm_dev_put
This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tdz@users.sourceforge.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Thomas Zimmermann [Mon, 18 Jun 2018 12:53:11 +0000 (14:53 +0200)]
drm/nouveau: Replace drm_gem_object_unreference_unlocked with put function
This patch unifies the naming of DRM functions for reference counting
of struct drm_gem_object. The resulting code is more aligned with the
rest of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tdz@users.sourceforge.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Thomas Zimmermann [Mon, 18 Jun 2018 12:53:10 +0000 (14:53 +0200)]
drm/nouveau: Replace drm_framebuffer_{un/reference} with put, get functions
This patch unifies the naming of DRM functions for reference counting
of struct drm_framebuffer. The resulting code is more aligned with the
rest of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tdz@users.sourceforge.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Nick Desaulniers [Fri, 15 Jun 2018 23:00:42 +0000 (16:00 -0700)]
drm/nouveau/nvif: remove const attribute from nvif_mclass
Similar to commit
0bf8bf50eddc ("module: Remove
const attribute from alias for MODULE_DEVICE_TABLE")
Fixes many -Wduplicate-decl-specifier warnings due to the combination of
const typeof() of already const variables.
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Dan Carpenter [Wed, 11 Jul 2018 08:02:28 +0000 (11:02 +0300)]
drm/nouveau/hwmon: potential uninitialized variables
Smatch complains that "value" can be uninitialized when kstrtol()
returns -ERANGE.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
projects / openwrt / staging / blogic.git / log