staging/lustre: Reformat comments and structures in lustre_idl.h

This file mostly contains various on the wire data and got
significantly mangled in transition.
This patch rectifies the situation somewhat. Also fixes the
comment style for block comments.

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Remove unused lli_open_count from struct ll_inode_info

Capabilities code was the only user and it is long gone.

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: MAY_NOT_BLOCK is always defined, don't check for it.

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Remove dead code in ldlm_lock_destroy_internal

This code has been commented out since end of 2012, so it's
clearly not needed here.

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Remove last_rcvd-file related data

last_rcvd (last received) is a special server-side file on the
Lustre FS that stores information about server filesystem and
also list of connected clients and their state. There's no
point in having any of tha ton the client, though.

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Remove server data from struct obd_export

Despite it's name struct obd_export could exist on the client too
(used for reverse exports), but all the actual server bits
are not needed there, so could be dropped. This is mostly
various target-related stuff.

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Remove index file transfer structures

struct idx_info, struct lu_idxpage, lustre_swab_idx_info,
request formats and related defines are all unused and could
only happen for between-servers communications, so remove them
from the client code.

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: FMODE_READ and FMODE_WRITE are always defined in the kernel

So no need to see if they are.

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: S_DIRSYNC is always defined in kernel

No need to check for it.

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Remove lquota_glb_rec, lquota_slv_rec and lquota_acct_rec

These server-only structures and some supporting defines are unused
on the client.

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Remove unused struct quota_body

It's only used for communications between servers.

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Remove duplicated quota defines

QUOTABLOCK_BITS, QUOTABLOCK_SIZE and toqb are only used on the server
and are copied from kernel code anyway.

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Remove *_CONNECT_SUPPORTED defines

These defines are only used on the servers to determine
what connect flags corresponding servers support:
MDT_CONNECT_SUPPORTED
OST_CONNECT_SUPPORTED
MGS_CONNECT_SUPPORTED
ECHO_CONNECT_SUPPORTED

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Remove server-only values from enum lu_dirent_attrs

These values cannot be seen on the client so we probably should
not even be aware of them on the client.

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Remove FSF mailing address from GPL notices

This patch removes remaining several places that still had that
extra paragraph included in Lustre code.

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Remove server-side changelog defines

CHANGELOG_MAGIC, CHANGELOG_MINMASK, CHANGELOG_ALLMASK,
CHANGELOG_DEFMASK and CHANGELOG_USER_PREFIX are all unused
on the client.

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Get rid of C99 comments in lustre_idl.h

lustre_idl.h contains various protocol data. In order to avoid
reusal of values that might have meant something else in the past,
the old no longer used values are commented out, convert the
comments into regular comments from C99 where appropriate.

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Remove lustre_build_version.h

of the two macroses is contained the LUSTRE_RELEASE was unused and
BUILD_VERSION is too generically named and was replaced with
LUSTRE_VERSION_STRING with all the users (provided by lustre_ver.h)

With in-kernel client the build version should be combined with
kernel build information anyway.

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/llite: Get rid of se_stat_t typedef

Replace it with enum se_stat

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Get rid of ldlm_cancel_flags_t typedef

Replace it with enum ldlm_cancel_flags

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Get rid of ldlm_ns_type_t typedef

Replace it with enum ldlm_ns_type

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Remove ldlm_appetite_t typedef

Replace it with enum ldlm_appetite

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Get rid of ldlm_error_t typedef

Replace it with enum ldlm_error

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Get rid of lustre_quota_version typedef

Does not appear to be used anywhere.

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Get rid of lustre_fid typedef

Replace it with struct lu_fid

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Get rid of object update code

Object update was originally planned to be used for cross-server
updates, so nothign to do with the client. The idea was
later significantly reworked anyway so even wire structs should
not be retained.

This gets rid of update_cmd_t, UPDATE and UPDATE_REPLY rpc and
corresponding subcommands, swabbig logic and such.

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Get rid of sec_cmd_t typedef

Replace with enum sec_cmd

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Get rid of llog_op_type typedef

Replace with enum llog_op_type

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Get rid of obd_cmd_t typedef

Replace with enum obd_cmd

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Get rid of mgs_cmd_t typedef

Replace it with enum mgs_cmd

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Remove ldlm type/mode typedefs

Replace ldlm_mode_t with enum ldlm_mode,
ldlm_type_t with enum ldlm_type

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Get rid of ldlm_cmd_t typedef

Replace it with enum ldlm_cmd

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Get rid of mds_reint_t, mdt_reint_t typedefs

Replace with enum mdt_reint_cmd

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Get rid of mds_cmd_t typedef

Replace it with enum mds_cmd

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Get rid of quota_cmd_t typedef

Replace it with enum quota_cmd

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Get rid of ost_cmd_t typedef

Replace it with enum ost_cmd

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Get rid of cksum_type_t typedef

Replace it with enum cksum_type

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Get rid of loc_flags_t typedef

Replace it with direct reference of enum loc_flags

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Get rid of client_obd_lock_t typedef

Replace it with struct client_obd_lock

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/fld: Remove useless typedefs

Typedefs fld_hash_func_t and fld_scan_func_t are used exectly once in
the following structure so don't really help anything at all.

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/ldlm: Remove unused lr_most_restr from struct ldlm_resource

This member comes from the dawn of time and is no longer needed

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Remove LASSERTS from router checker

In lnet_router_checker(), there are two LASSERTS.  Neither protects
us from anything and one of them triggered for a customer crashing
the system unecessarily.  This patch removes them.

Signed-off-by: Doug Oucharek <doug.s.oucharek@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7362
Reviewed-on: http://review.whamcloud.com/17003
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Chris Horn <hornc@cray.com>
Reviewed-by: Matt Ezell <ezellma@ornl.gov>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Use lnet_is_route_alive for router aliveness

lctl show_route and lctl route_list will output router aliveness
information via lnet_get_route(). lnet_get_route() should use the
lnet_is_route_alive() function, introduced in e8a1124
http://review.whamcloud.com/7857, to determine route aliveness.

Signed-off-by: Chris Horn <hornc@cray.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5733
Reviewed-on: http://review.whamcloud.com/14055
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Amir Shehata <amir.shehata@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Allocate the correct number of rtr buffers

This patch ensures that the correct number of router buffers are
allocated.  It keeps a count that keeps track of the number of
buffers allocated.  Another count keeps the number of buffers
requested. The number of buffers allocated is set when creating
new buffers and reduced when buffers are freed.

The number of requested buffer is set when the buffers are
allocated and is checked when credits are returned to determine
whether the buffer should be freed or kept.

In lnet_rtrpool_adjust_bufs() grab lnet_net_lock() before using
rbp_nbuffers to ensure that it doesn't change by
lnet_return_rx_credits_locked() during the process of allocating
new buffers.  All other access to rbp_nbuffers is already being
protected by lnet_net_lock().

This avoids the case where we allocate less than the desired
number of buffers.

Signed-off-by: Amir Shehata <amir.shehata@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6122
Reviewed-on: http://review.whamcloud.com/13519
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: use sock.h in only acceptor.c

On some platforms having sock.h in lib-types.h would collide with
other included header files being used in the LNet layer. Looking
at what was needed from sock.h only acceptor.c is dependent on it.
To avoid these issues we just use sock.h only in acceptor.c.

Signed-off-by: James Simmons <jsimmons@infradead.org>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6763
Reviewed-on: http://review.whamcloud.com/15386
Reviewed-by: Chris Horn <hornc@cray.com>
Reviewed-by: Amir Shehata <amir.shehata@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: avoid race during lnet acceptor thread termination

This patch will avoid potential race, around socket sleepers
wait list, during acceptor thread termination and using
sk_callback_lock RW-Lock protection.

Signed-off-by: Bruno Faccini <bruno.faccini@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6476
Reviewed-on: http://review.whamcloud.com/14503
Reviewed-by: Amir Shehata <amir.shehata@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: remove unnecessary EXPORT_SYMBOL from lnet layer

A lot of symbols don't need to be exported at all because they are
only used in the module they belong to.

Signed-off-by: Frank Zago <fzago@cray.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5829
Reviewed-on: http://review.whamcloud.com/13320
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Isaac Huang <he.huang@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: remove messages from lazy portal on NI shutdown

When shutting down an NI in a busy system, some messages received
on this NI, might be on the lazy portal.  They would have grabbed
a ref count on the NI.  Therefore NI will not be removed until
messages are processed.

In order to avoid this scenario, when an NI is shutdown go through
all messages queued on the lazy portal and drop messages for the
NI being shutdown

Signed-off-by: Amir Shehata <amir.shehata@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6040
Reviewed-on: http://review.whamcloud.com/13836
Reviewed-by: Isaac Huang <he.huang@intel.com>
Reviewed-by: Liang Zhen <liang.zhen@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: prevent assert on LNet module unload

There is a use case where lnet can be unloaded while there are
no NIs configured.  Removing lnet in this case will cause
LNetFini() to be called without a prior call to LNetNIFini().
This will cause the LASSERT(the_lnet.ln_refcount == 0) to be
triggered.

To deal with this use case when LNet is configured a reference
count on the module is taken using try_module_get().  This way
LNet must be unconfigured before it could be removed; therefore
avoiding the above case.  When LNet is unconfigured module_put()
is called to return the reference count.

Signed-off-by: Amir Shehata <amir.shehata@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6010
Reviewed-on: http://review.whamcloud.com/13110
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: assume a kernel build

In lnet/lnet/ and lnet/selftest/ assume a kernel build (assume that
 __KERNEL__ is defined). Remove some common code only needed for user
space LNet.

Only part of the work of this patch got merged. This is the final
bits.

Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2675
Reviewed-on: http://review.whamcloud.com/13121
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Amir Shehata <amir.shehata@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: improvement to router checker

This patch starts router checker thread all the time.

The router checker only checks routes by ping if
live_router_check_interval or dead_router_check_interval are set
to something other than 0, and there are routes configured.

If these conditions are not met the router checker sleeps until woken
up when a route is added.  It is also woken up whenever the RC is
being stopped to ensure the thread doesn't hang.

In the future when DLC starts configuring the live and dead
router_check_interval parameters, then by manipulating them
the router checker can be turned on and off by the user.

Signed-off-by: Amir Shehata <amir.shehata@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6003
Reviewed-on: http://review.whamcloud.com/13035
Reviewed-by: Liang Zhen <liang.zhen@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: handle lnet_check_routes() errors

After adding a route, lnet_check_routes() is called to ensure that
the route added doesn't invalidate the routing configuration.  If
lnet_check_routes() fails then the route just added, which caused the
current configuration to be invalidated is deleted, and an error
is returned to the user.

Signed-off-by: Amir Shehata <amir.shehata@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6218
Reviewed-on: http://review.whamcloud.com/13445
Reviewed-by: Liang Zhen <liang.zhen@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: return -EEXIST if NI is not unique

Return -EEXIST and not -EINVAL when trying to add a
network interface which is not unique.

Some minor cleanup in api-ni.c

Signed-off-by: Amir Shehata <amir.shehata@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5875
Reviewed-on: http://review.whamcloud.com/13056
Reviewed-by: Isaac Huang <he.huang@intel.com>
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: reject invalid net configuration for lnet

Currently if there exists a route that goes over a
remote net and then this net is added dynamically as
a local net, then traffic stops because the code in
lnet_send() determines that the destination nid
can be reached from another local_ni, but the src_nid
is still stuck on the earlier NI, because the src_nid
is stored in the ptlrpc layer and is not updated
when a local NI is configured.

Signed-off-by: Amir Shehata <amir.shehata@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5874
Reviewed-on: http://review.whamcloud.com/12912
Reviewed-by: Isaac Huang <he.huang@intel.com>
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: startup lnet acceptor thread dynamically

With DLC it's possible to start up a system with no NIs that require
the acceptor thread, and thus it won't start.  Later on the user
can add an NI that requires the acceptor thread to start, it is
then necessary to start it up.

If the user removes a NI and as a result there are no more
NIs that require the acceptor thread then it should be stopped.
This patch adds logic in the dynamically adding and removing NIs
code to ensure the above logic is implemented.

Signed-off-by: Amir Shehata <amir.shehata@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6002
Reviewed-on: http://review.whamcloud.com/13010
Reviewed-by: Isaac Huang <he.huang@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: missed a few cases of using NULL instead of 0

It is preferable to use NULL instead of 0 for pointers. This fixes sparse
warnings such as:

lustre/fld/fld_request.c:126:17: warning: Using plain integer as NULL pointer

The second parameter of class_match_param() was changed to a const, to
be able to remove a cast in one user, to prevent splitting a long
line. No other code change.

Signed-off-by: Frank Zago <fzago@cray.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5396
Reviewed-on: http://review.whamcloud.com/12567
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: make some lnet functions static

Some functions and variables are only used in their C file, so reduce
their scope. This reduces the code size, and fixes sparse warnings
such as:

warning: symbol 'proc_lnet_routes' was not declared.
        Should it be static?
warning: symbol 'proc_lnet_routers' was not declared.
        Should it be static?

Some prototypes were removed from C files and added to the proper
header.

Signed-off-by: Frank Zago <fzago@cray.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5396
Reviewed-on: http://review.whamcloud.com/12206
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: return appropriate errno when adding route

When adding route it ignored specific scenarios, namely:
1. route already exists
2. route is on a local net
3. route is unreacheable

This patch returns the appropriate return codes from the lower level
function lnet_add_route(), and then ignores the above case from the
calling function, lnet_parse_route().  This is needed so we don't
halt processing routes in the module parameters.

However, we can now add routes dynamically, and it should be returned
to the user whether adding the requested route succeeded or failed.

In userspace it is determined whether to continue adding routes or to
halt processing.  Currently "lnetctl import < config" continues
adding the rest of the configuration and reports at the end which
operations passed and which ones failed.

Signed-off-by: Amir Shehata <amir.shehata@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6045
Reviewed-on: http://review.whamcloud.com/13116
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: Isaac Huang <he.huang@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: improve LNet clean up code and API

This patch addresses a set of related issues: LU-5568, LU-5734,
LU-5839, LU-5849, LU-5850.

Create the local lnet_startup_lndni() API.  This function starts
up one LND.  lnet_startup_lndnis() calls this function in a loop
on every ni in the list passed in.  lnet_startup_lndni() is
responsible for cleaning up after itself in case of failure.
It calls lnet_free_ni() if the ni fails to start.  It calls
lnet_shutdown_lndni() if it successfully called the
lnd startup function, but fails later on.

lnet_startup_lndnis() also cleans up after itself.
If lnet_startup_lndni() fails then lnet_shutdown_lndnis() is
called to clean up all nis that might have been
started, and then free the rest of the nis on the list
which have not been started yet.

To facilitate the above changes lnet_dyn_del_ni() now
manages the ping info.  It calls lnet_shutdown_lndni(),
to shutdown the NI.  lnet_shutdown_lndni() is no longer
an exposed API and doesn't manage the ping info, making
it callable from lnet_startup_lndni() as well.

There are two scenarios for calling lnet_startup_lndni()

1. from lnet_startup_lndnis()
If lnet_startup_lndni() fails it requires to shutdown the ni
without doing anything with the ping information as it hasn't
been created yet.

2. from lnet_dyn_add_ni()
As above it will shutdown the ni, and then lnet_dyn_add_ni() will
take care of managing the ping info

The second part of this change is to ensure that the LOLND is not
added by lnet_parse_networks(), but the caller which needs to do
it (IE: LNetNIInit)

This change ensures that lnet_dyn_add_ni() need only check if there is
only one net that's being added, if not then it frees everything,
otherwise it proceeds to startup the requested net.

Signed-off-by: Amir Shehata <amir.shehata@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5734
Reviewed-on: http://review.whamcloud.com/12658
Reviewed-by: Liang Zhen <liang.zhen@intel.com>
Reviewed-by: Isaac Huang <he.huang@intel.com>
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: remove LUSTRE_{,SRV_}LNET_PID

Remove LUSTRE_LNET_PID (12354) and LUSTRE_SRV_LNET_PID (12345) from
the libcfs headers and replace their uses with a new macro
LNET_PID_LUSTRE (also 12345) in lnet/types.h.

Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2675
Reviewed-on: http://review.whamcloud.com/11985
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: make local functions static for LNet ni

The function lnet_unprepare can be made static.

Signed-off-by: Frank Zago <fzago@cray.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5396
Reviewed-on: http://review.whamcloud.com/11306
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Patrick Farrell <paf@cray.com>
Reviewed-by: Amir Shehata <amir.shehata@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: DLC user/kernel space glue code

This is the sixth patch of a set of patches that enables DLC.

This patch enables the user space to call into the kernel space
DLC code.  Added handlers in the LNetCtl function to call
the new functions added for Dynamic Lnet Configuration

Signed-off-by: Amir Shehata <amir.shehata@intel.com>
ntel-bug-id: https://jira.hpdd.intel.com/browse/LU-2456
Reviewed-on: http://review.whamcloud.com/8023
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: fix crash due to NULL networks string

If there is an invalid networks or ip2nets lnet_parse_networks()
gets called with a NULL 'network' string parameter

lnet_parse_networks() needs to sanitize its input string now that
it's being called from multiple places.  Instead, check for
a NULL string everytime the function is called, which reduces the
probability of errors with other code modifications.

Signed-off-by: Amir Shehata <amir.shehata@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5540
Reviewed-on: http://review.whamcloud.com/11626
Reviewed-by: Isaac Huang <he.huang@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Dynamic LNet Configuration (DLC) show command

This is the fifth patch of a set of patches that enables DLC.

This patch adds the new structures which will be used
in the IOCTL communication.  It also added a set of
show operations to show buffers, networks, statistics
and peer information.

Signed-off-by: Amir Shehata <amir.shehata@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2456
Reviewed-on: http://review.whamcloud.com/8022
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Dynamic LNet Configuration (DLC) IOCTL changes

This is the fourth patch of a set of patches that enables DLC.

This patch changes the IOCTL infrastructure in preparation of
adding extra IOCTL communication between user and kernel space.
The changes include:
- adding a common header to be passed to ioctl infra functions
  instead of passing an exact structure.  This header is meant
  to be included in all structures to be passed through that
  interface.  The IOCTL handler casts this header to a particular
  type that it expects
- All sanity testing on the past in structure is performed in the
  generic ioctl infrastructure code.
- All ioctl handlers changed to take the header instead of a
  particular structure type

Signed-off-by: Amir Shehata <amir.shehata@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2456
Reviewed-on: http://review.whamcloud.com/8021
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge char-misc-next into staging-next

This resolves the merge issues and confusions people were having with
the goldfish drivers due to changes for them showing up in two different
trees.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: wilc_wfi_netdevice: Remove header files

Remove duplicate header files. Found using includecheck.

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: Remove header file

Remove duplicate header file. Found using includecheck.

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: Remove header files

Remove duplicate include files. Found using includecheck.

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: os_dep: Remove header file

Remove duplicate include file. Found using includecheck.

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rdma: hfi1: Remove header file

Remove duplicate include file. Found using includecheck.

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: obdclass: Remove header file

Remove duplicate include file. Found using includecheck.

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: emxx_udc: Remove header file

Remove duplicate include file. Found using includecheck.

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: Check for quoted strings broken across lines

checkpatch warn about quoted strings split across lines.
So, convert multi-line string into a single line.

Signed-off-by: Anchal Jain <anchalj109@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: removes linux_wlan_common.h file

This patch removes linux_wlan_common.h file and also removes the following
preprocessor at files that include it:
 - #include 'linux_wlan_common.h'

Signed-off-by: Chris Park <chris.park@atmel.com>
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove useless define in linux_wlan_common.h file

This patch removes useless define in linux_wlan_common.h file

Signed-off-by: Chris Park <chris.park@atmel.com>
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: move MODALIS and GPIO_NUM define to wilc_wlan.h file

This patch moves MODALIS and GPIO_NUM define to wilc_wlan.h file.
MODALIS and GPIO_NUM define are used to two files (wilc_sdio.c,
wilc_spi.c), these files already include wilc_wlan.h file in common.

Signed-off-by: Chris Park <chris.park@atmel.com>
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: move WILC_MULTICAST_TABLE_SIZE define to wilc_wlan_if.h file

This patch moves WILC_MULTICAST_TABLE_SIZE define to wilc_wlan_if.h file.
This define is used to three files(host_interface.c,host_interface.h,
linux_wlan.c) these files already include wilc_wlan_if.h file in common.

Signed-off-by: Chris Park <chris.park@atmel.com>
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: wilc_wlan_cfg_init: changes unused argument

This patch changes the argument of the wilc_wlan_cfg_init function,
wilc_debug to void type because wilc_debug function is not used any more.
In addition, finally removes wilc_debug and related variables.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: removes unnecessary variable of wilc_mac_cfg_t structure

This patch removes unnecessary variable of wilc_mac_cfg_t structure.
The variable is debug print function pointer.
Removes all what used this variable.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: removes unnecessary wilc_debug print log

This patch removes unnecessary wilc_debug print log.
The print log was written when if condition fail.
The condition is chip-id check function.
Also, replaces this condition with normal function.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: removes unnecessary wilc_debug print log

This patch removes unnecessary wilc_debug print log and the check routine.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: replaces wilc_debug with netdev_err

This patches replaces wilc_debug with netdev_err.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: removes wilc_dbg()

This patch removes wilc_dbg function because it's not any more.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: moves LINUX_RX_SIZE, LINUX_TX_SIZE

This patch moves LINUX_RX_SIZE and LINUX_TX_SIZE to wilc_wlan.h file
because there are only used to wilc_wlan.c file.

Signed-off-by: Chris Park <chris.park@atmel.com>
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: moves to define values

This patch moves DEBUG, INFO, WRN and ERR values to wilc_debugfs.c file
because this is only used to wilc_debugfs.c file.
And, removes unnecessary WILC_DEBUGFS and else-case variables.

Signed-off-by: Chris Park <chris.park@atmel.com>
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: removes usused PRINT_XX(region...)

This patch removes unused PRINT_XX(region...)
because already removed in used to region feature of whole wilc source.
Also, removes unnecessary related region extern variable.

Signed-off-by: Chris Park <chris.park@atmel.com>
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: removes unused region feature

This patch removes unused region feature on debug message.
Also, removes the functions of related in this feature.

Signed-off-by: Chris Park <chris.park@atmel.com>
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: wilc_wlan.c: removes unnecessary log messages

This patch removes unnecessary log messages.

Signed-off-by: Chris Park <chris.park@atmel.com>
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: wilc_wfi_cfgoperations.c: removes unnecessary log messages

This patch removes unnecessary log messages.

Signed-off-by: Chris Park <chris.park@atmel.com>
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: linux_wlan.c: removes unnecessary log messages

This patch removes unnecessary log messages.

Signed-off-by: Chris Park <chris.park@atmel.com>
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: host_interface.c: replace PRINT_ER with netdev_err

This patch replaces PRINT_ER with netdev_err.

Signed-off-by: Chris Park <chris.park@atmel.com>
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: host_interface.c: removes unnecessary log messages

This patch removes unnecessary log messages.

Signed-off-by: Chris Park <chris.park@atmel.com>
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: coreconfigurator.c: removes unnecessary log messages

This patch removes unnecessary log messages.

Signed-off-by: Chris Park <chris.park@atmel.com>
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: removes unused CFG80211_DBG tag

This patch removes unused CFG80211_DBG tag.

Signed-off-by: Chris Park <chris.park@atmel.com>
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: wilc_wfi_cfgoperations.c: removes unnecessary log messages

This patch removes unnecessary log messages.
And, it adds a 'break' statement in accordance with the switch-case rule.

Signed-off-by: Chris Park <chris.park@atmel.com>
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: wilc_wfi_cfgoperations.c: removes unnecessary log messages

This patch removes unnecessary log messages and relate variables.

Signed-off-by: Chris Park <chris.park@atmel.com>
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: host_interface.c: removes unnecessary log messages

This patch removes unnecessary log message and relate variables.

Signed-off-by: Chris Park <chris.park@atmel.com>
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: removes unused HOSTAPD_DBG tag

This patch removes unused HOSTAPD_DBG tag.

Signed-off-by: Chris Park <chris.park@atmel.com>
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: wilc_wfi_cfgoperations.c: removes unnecessary log messages

This patch removes the unnecessary log messages which is used with
the HOSTAPD_DBG tag.

Signed-off-by: Chris Park <chris.park@atmel.com>
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>